diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/bcm63138.dtsi | 14 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sama5d3_emac.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/stm32mp157c.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-r40.dtsi | 3 | ||||
| -rw-r--r-- | arch/arm/mach-mmp/devices.c | 11 | ||||
| -rw-r--r-- | arch/arm/mm/ioremap.c | 2 | ||||
| -rw-r--r-- | arch/arm/tools/syscall.tbl | 1 |
8 files changed, 17 insertions, 22 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index b10dccd0958f..3b1baa8605a7 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -11,6 +11,7 @@ #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/at91.h> / { model = "Atmel SAMA5D2 PTC EK"; @@ -299,6 +300,7 @@ <PIN_PA30__NWE_NANDWE>, <PIN_PB2__NRD_NANDOE>; bias-pull-up; + atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>; }; ale_cle_rdy_cs { diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 43ee992ccdcf..6df61518776f 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -106,21 +106,23 @@ global_timer: timer@1e200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x1e200 0x20>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&axi_clk>; }; local_timer: local-timer@1e600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1e600 0x20>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; clocks = <&axi_clk>; }; twd_watchdog: watchdog@1e620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x1e620 0x20>; - interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; }; armpll: armpll { @@ -158,7 +160,7 @@ serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; - interrupts = <GIC_SPI 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -167,7 +169,7 @@ serial1: serial@620 { compatible = "brcm,bcm6345-uart"; reg = <0x620 0x1b>; - interrupts = <GIC_SPI 33 0>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -180,7 +182,7 @@ reg = <0x2000 0x600>, <0xf0 0x10>; reg-names = "nand", "nand-int-base"; status = "disabled"; - interrupts = <GIC_SPI 38 0>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "nand"; }; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 7cb235ef0fb6..6e9e1c2f9def 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at91sam9260-macb", "cdns,macb"; + compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 661be948ab74..185541a5b69f 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1078,8 +1078,8 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc SPI6_K>; resets = <&rcc SPI6_R>; - dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>, - <&mdma1 35 0x0 0x40002 0x0 0x0 0>; + dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>, + <&mdma1 35 0x0 0x40002 0x0 0x0>; dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index ffd9f00f74a4..5f547c161baf 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -800,8 +800,7 @@ }; hdmi_phy: hdmi-phy@1ef0000 { - compatible = "allwinner,sun8i-r40-hdmi-phy", - "allwinner,sun50i-a64-hdmi-phy"; + compatible = "allwinner,sun8i-r40-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, <&ccu 7>, <&ccu 16>; diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 671c7a09ab3d..0fca63c80e1a 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -277,21 +277,12 @@ struct platform_device pxa168_device_u2o = { #if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) struct resource pxa168_u2oehci_resources[] = { - /* regbase */ [0] = { - .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .start = PXA168_U2O_REGBASE, .end = PXA168_U2O_REGBASE + USB_REG_RANGE, .flags = IORESOURCE_MEM, - .name = "capregs", }, - /* phybase */ [1] = { - .start = PXA168_U2O_PHYBASE, - .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, - .flags = IORESOURCE_MEM, - .name = "phyregs", - }, - [2] = { .start = IRQ_PXA168_USB1, .end = IRQ_PXA168_USB1, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index fc91205ff46c..5bf9443cfbaa 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -473,7 +473,7 @@ void pci_ioremap_set_mem_type(int mem_type) int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) { - BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT); + BUG_ON(offset + SZ_64K - 1 > IO_SPACE_LIMIT); return ioremap_page_range(PCI_IO_VIRT_BASE + offset, PCI_IO_VIRT_BASE + offset + SZ_64K, diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index fbc74b5fa3ed..8edf93b4490f 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -413,3 +413,4 @@ 396 common pkey_free sys_pkey_free 397 common statx sys_statx 398 common rseq sys_rseq +399 common io_pgetevents sys_io_pgetevents |