diff options
Diffstat (limited to 'arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso')
| -rw-r--r-- | arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 41 |
1 files changed, 39 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index a7b8fffad499..a74d0ac7e07a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -17,6 +17,17 @@ /plugin/; &{/} { + compatible = "xlnx,zynqmp-sk-kv260-rev2", + "xlnx,zynqmp-sk-kv260-rev1", + "xlnx,zynqmp-sk-kv260-revB", + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; + model = "ZynqMP KV260 revB"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; @@ -52,6 +63,18 @@ #clock-cells = <0>; clock-frequency = <27000000>; }; + + dpcon { + compatible = "dp-connector"; + label = "P11"; + type = "full-size"; + + port { + dpcon_in: endpoint { + remote-endpoint = <&dpsub_dp_out>; + }; + }; + }; }; &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ @@ -63,8 +86,13 @@ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - /* u14 - 0x40 - ina260 */ - /* u43 - 0x2d - usb5744 */ + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + /* u43 - 0x2d - USB hub */ /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ }; @@ -81,6 +109,14 @@ phy-names = "dp-phy0", "dp-phy1"; phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; assigned-clock-rates = <27000000>, <25000000>, <300000000>; + + ports { + port@5 { + dpsub_dp_out: endpoint { + remote-endpoint = <&dpcon_in>; + }; + }; + }; }; &zynqmp_dpdma { @@ -305,6 +341,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; conf-cd { |