diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qrb5165-rb5.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 122 |
1 files changed, 96 insertions, 26 deletions
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index cd0db4f31d4a..ccff6cd73fdf 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -108,10 +108,69 @@ regulator-always-on; }; + qca6390-pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddrfa0p95-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p3>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; + thermal-zones { conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150b_adc_tm 0>; trips { @@ -124,8 +183,6 @@ }; pm8150l-pcb-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 1>; trips { @@ -138,8 +195,6 @@ }; skin-msm-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150l_adc_tm 0>; trips { @@ -152,8 +207,6 @@ }; wifi-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 1>; trips { @@ -166,8 +219,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm8150_adc_tm 0>; trips { @@ -734,6 +785,23 @@ vdda-pll-supply = <&vreg_l9a_1p2>; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1101"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie1 { status = "okay"; }; @@ -1303,6 +1371,14 @@ function = "gpio"; bias-pull-up; }; + + wlan_en_state: wlan-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-pull-up; + }; }; &uart6 { @@ -1311,17 +1387,12 @@ bluetooth { compatible = "qcom,qca6390-bt"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_state>; - - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - - vddio-supply = <&vreg_s4a_1p8>; - vddpmu-supply = <&vreg_s2f_0p95>; - vddaon-supply = <&vreg_s6a_0p95>; - vddrfa0p9-supply = <&vreg_s2f_0p95>; - vddrfa1p3-supply = <&vreg_s8c_1p3>; - vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; }; }; @@ -1356,8 +1427,8 @@ usb-role-switch; }; -&usb_1_role_switch_out { - remote-endpoint = <&pm8150b_role_switch_in>; +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm8150b_hs_in>; }; &usb_1_hsphy { @@ -1373,7 +1444,6 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; - orientation-switch; }; &usb_1_qmpphy_out { @@ -1465,8 +1535,8 @@ port@0 { reg = <0>; - pm8150b_role_switch_in: endpoint { - remote-endpoint = <&usb_1_role_switch_out>; + pm8150b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; }; }; |