diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 111 |
1 files changed, 110 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index a085ff5b5fb2..0d45662b8028 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -52,6 +52,25 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + reserved-memory { xbl_mem: xbl@80700000 { reg = <0x0 0x80700000 0x0 0x100000>; @@ -530,6 +549,54 @@ <GCC_WPSS_RSCP_CLK>; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <&vreg_l11c_2p8>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + &i2c1 { status = "okay"; @@ -587,6 +654,21 @@ remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + status = "okay"; +}; + &mdss_edp { status = "okay"; }; @@ -602,10 +684,18 @@ status = "okay"; }; +&pmk8350_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/qcs6490/adsp.mbn"; status = "okay"; @@ -632,7 +722,6 @@ }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -711,3 +800,23 @@ function = "gpio"; bias-disable; }; + +&pm7250b_gpios { + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio2"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; +}; + +&tlmm { + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; |