diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 72 |
1 files changed, 36 insertions, 36 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 604bf88d70b3..8ce4b6aae79d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -118,7 +118,7 @@ <0x0 0x0c0c0000 0 0x2000>, /* GICC */ <0x0 0x0c0d0000 0 0x1000>, /* GICH */ <0x0 0x0c0e0000 0 0x20000>; /* GICV */ - interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -131,7 +131,7 @@ }; thermal-zones { - core-cluster { + core-cluster-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -166,7 +166,7 @@ }; }; - soc { + soc-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -183,10 +183,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ - <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ - <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ - <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; pmu { @@ -280,7 +280,7 @@ tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ @@ -347,7 +347,7 @@ reg = <0x0 0x21c0500 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -356,14 +356,14 @@ reg = <0x0 0x21c0600 0x0 0x100>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; gpio0: gpio@2300000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -374,7 +374,7 @@ gpio1: gpio@2310000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -385,7 +385,7 @@ gpio2: gpio@2320000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -396,7 +396,7 @@ gpio3: gpio@2330000 { compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; little-endian; gpio-controller; #gpio-cells = <2>; @@ -407,7 +407,7 @@ ifc: memory-controller@2240000 { compatible = "fsl,ifc"; reg = <0x0 0x2240000 0x0 0x20000>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; little-endian; #address-cells = <2>; #size-cells = <1>; @@ -419,7 +419,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -430,7 +430,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -441,7 +441,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -452,7 +452,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; @@ -474,10 +474,10 @@ status = "disabled"; }; - esdhc: esdhc@2140000 { + esdhc: mmc@2140000 { compatible = "fsl,ls1088a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; /* Level high type */ + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; @@ -490,7 +490,7 @@ usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -501,7 +501,7 @@ usb1: usb@3110000 { compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -514,7 +514,7 @@ reg = <0x0 0x3200000 0x0 0x10000>, <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; - interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; dma-coherent; @@ -565,7 +565,7 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; @@ -604,7 +604,7 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x28 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; @@ -642,7 +642,7 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x30 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; @@ -880,7 +880,7 @@ }; }; - cluster1_core0_watchdog: wdt@c000000 { + cluster1_core0_watchdog: watchdog@c000000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -890,7 +890,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster1_core1_watchdog: wdt@c010000 { + cluster1_core1_watchdog: watchdog@c010000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -900,7 +900,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster1_core2_watchdog: wdt@c020000 { + cluster1_core2_watchdog: watchdog@c020000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -910,7 +910,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster1_core3_watchdog: wdt@c030000 { + cluster1_core3_watchdog: watchdog@c030000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -920,7 +920,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core0_watchdog: wdt@c100000 { + cluster2_core0_watchdog: watchdog@c100000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -930,7 +930,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core1_watchdog: wdt@c110000 { + cluster2_core1_watchdog: watchdog@c110000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -940,7 +940,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core2_watchdog: wdt@c120000 { + cluster2_core2_watchdog: watchdog@c120000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -950,7 +950,7 @@ clock-names = "wdog_clk", "apb_pclk"; }; - cluster2_core3_watchdog: wdt@c130000 { + cluster2_core3_watchdog: watchdog@c130000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL @@ -1040,7 +1040,7 @@ little-endian; }; - ftm_alarm0: timer@2800000 { + ftm_alarm0: rtc@2800000 { compatible = "fsl,ls1088a-ftm-alarm"; reg = <0x0 0x2800000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; |