diff options
Diffstat (limited to 'arch/arm/plat-omap/include')
26 files changed, 808 insertions, 591 deletions
diff --git a/arch/arm/plat-omap/include/plat/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h deleted file mode 100644 index 730c49d1ebd8..000000000000 --- a/arch/arm/plat-omap/include/plat/clkdev.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -static inline int __clk_get(struct clk *clk) -{ - return 1; -} - -static inline void __clk_put(struct clk *clk) -{ -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index f1899a3e4174..387a9638991b 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -39,6 +39,7 @@ struct omap_clk { #define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) +#define CK_446X (1 << 13) #define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 006e599c6613..197ca03c3f7d 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -58,10 +58,12 @@ struct clkops { #define RATE_IN_36XX (1 << 4) #define RATE_IN_4430 (1 << 5) #define RATE_IN_TI816X (1 << 6) +#define RATE_IN_4460 (1 << 7) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) #define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) +#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ #define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) @@ -78,8 +80,6 @@ struct clkops { * * @div is the divisor that should be applied to the parent clock's rate * to produce the current clock's rate. - * - * XXX @flags probably should be replaced with an struct omap_chip. */ struct clksel_rate { u32 val; @@ -152,7 +152,7 @@ struct dpll_data { u16 max_multiplier; u8 last_rounded_n; u8 min_divider; - u8 max_divider; + u16 max_divider; u8 modes; #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 5288130be96e..c50df4814f6f 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -34,13 +34,29 @@ struct sys_timer; extern void omap_map_common_io(void); -extern struct sys_timer omap_timer; +extern struct sys_timer omap1_timer; +extern struct sys_timer omap2_timer; +extern struct sys_timer omap3_timer; +extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap4_timer; extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); extern unsigned long long notrace omap_32k_sched_clock(void); extern void omap_reserve(void); +void omap2420_init_early(void); +void omap2430_init_early(void); +void omap3430_init_early(void); +void omap35xx_init_early(void); +void omap3630_init_early(void); +void omap3_init_early(void); /* Do not use this one */ +void am35xx_init_early(void); +void ti816x_init_early(void); +void omap4430_init_early(void); + +void omap_sram_init(void); + /* * IO bases for various OMAP processors * Except the tap base, rest all the io bases @@ -49,13 +65,13 @@ extern void omap_reserve(void); struct omap_globals { u32 class; /* OMAP class to detect */ void __iomem *tap; /* Control module ID code */ - unsigned long sdrc; /* SDRAM Controller */ - unsigned long sms; /* SDRAM Memory Scheduler */ - unsigned long ctrl; /* System Control Module */ - unsigned long ctrl_pad; /* PAD Control Module */ - unsigned long prm; /* Power and Reset Management */ - unsigned long cm; /* Clock Management */ - unsigned long cm2; + void __iomem *sdrc; /* SDRAM Controller */ + void __iomem *sms; /* SDRAM Memory Scheduler */ + void __iomem *ctrl; /* System Control Module */ + void __iomem *ctrl_pad; /* PAD Control Module */ + void __iomem *prm; /* Power and Reset Management */ + void __iomem *cm; /* Clock Management */ + void __iomem *cm2; }; void omap2_set_globals_242x(void); @@ -70,7 +86,11 @@ void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); +void omap242x_map_io(void); +void omap243x_map_io(void); void omap3_map_io(void); +void omap4_map_io(void); + /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 8198bb6cdb5e..2f9026942229 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -44,13 +44,6 @@ int omap_type(void); -struct omap_chip_id { - u16 oc; - u8 type; -}; - -#define OMAP_CHIP_INIT(x) { .oc = x } - /* * omap_rev bits: * CPU id bits (0730, 1510, 1710, 2422...) [31:16] @@ -60,19 +53,6 @@ struct omap_chip_id { unsigned int omap_rev(void); /* - * Define CPU revision bits - * - * Verbose meaning of the revision bits may be different for a silicon - * family. This difference can be handled separately. - */ -#define OMAP_REVBITS_00 0x00 -#define OMAP_REVBITS_01 0x01 -#define OMAP_REVBITS_02 0x02 -#define OMAP_REVBITS_03 0x03 -#define OMAP_REVBITS_04 0x04 -#define OMAP_REVBITS_05 0x05 - -/* * Get the CPU revision for OMAP devices */ #define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) @@ -88,6 +68,7 @@ unsigned int omap_rev(void); * cpu_is_omap243x(): True for OMAP2430 * cpu_is_omap343x(): True for OMAP3430 * cpu_is_omap443x(): True for OMAP4430 + * cpu_is_omap446x(): True for OMAP4460 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -123,6 +104,7 @@ IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) +IS_OMAP_SUBCLASS(446x, 0x446) IS_TI_SUBCLASS(816x, 0x816) @@ -137,6 +119,7 @@ IS_TI_SUBCLASS(816x, 0x816) #define cpu_is_ti816x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 +#define cpu_is_omap446x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -259,7 +242,7 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -IS_OMAP_TYPE(3505, 0x3505) +IS_OMAP_TYPE(3505, 0x3517) IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 @@ -351,8 +334,9 @@ IS_OMAP_TYPE(3517, 0x3517) (!omap3_has_sgx()) && \ (omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) -# define cpu_is_omap3505() is_omap3505() # define cpu_is_omap3517() is_omap3517() +# define cpu_is_omap3505() (cpu_is_omap3517() && \ + !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() # define cpu_is_ti816x() is_ti816x() @@ -361,8 +345,10 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x +# undef cpu_is_omap446x # define cpu_is_omap44xx() is_omap44xx() # define cpu_is_omap443x() is_omap443x() +# define cpu_is_omap446x() is_omap446x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -374,35 +360,31 @@ IS_OMAP_TYPE(3517, 0x3517) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 #define OMAP2420_REV_ES1_0 OMAP242X_CLASS -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8)) +#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) #define OMAP243X_CLASS 0x24300024 #define OMAP2430_REV_ES1_0 OMAP243X_CLASS #define OMAP343X_CLASS 0x34300034 #define OMAP3430_REV_ES1_0 OMAP343X_CLASS -#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8)) -#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8)) -#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8)) -#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8)) -#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8)) +#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) +#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) +#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) +#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) +#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) #define OMAP363X_CLASS 0x36300034 #define OMAP3630_REV_ES1_0 OMAP363X_CLASS -#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8)) -#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8)) +#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) +#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define OMAP35XX_CLASS 0x35000034 -#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) -#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8)) -#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8)) -#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8)) -#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) -#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) +#define OMAP3517_CLASS 0x35170034 +#define OMAP3517_REV_ES1_0 OMAP3517_CLASS +#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8)) #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS -#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8)) +#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) @@ -410,65 +392,15 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) #define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) -/* - * omap_chip bits - * - * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is - * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates - * something that is only valid on that particular ES revision. - * - * These bits may be ORed together to indicate structures that are - * available on multiple chip types. - * - * To test whether a particular structure matches the current OMAP chip type, - * use omap_chip_is(). - * - */ -#define CHIP_IS_OMAP2420 (1 << 0) -#define CHIP_IS_OMAP2430 (1 << 1) -#define CHIP_IS_OMAP3430 (1 << 2) -#define CHIP_IS_OMAP3430ES1 (1 << 3) -#define CHIP_IS_OMAP3430ES2 (1 << 4) -#define CHIP_IS_OMAP3430ES3_0 (1 << 5) -#define CHIP_IS_OMAP3430ES3_1 (1 << 6) -#define CHIP_IS_OMAP3630ES1 (1 << 7) -#define CHIP_IS_OMAP4430ES1 (1 << 8) -#define CHIP_IS_OMAP3630ES1_1 (1 << 9) -#define CHIP_IS_OMAP3630ES1_2 (1 << 10) -#define CHIP_IS_OMAP4430ES2 (1 << 11) -#define CHIP_IS_OMAP4430ES2_1 (1 << 12) -#define CHIP_IS_OMAP4430ES2_2 (1 << 13) -#define CHIP_IS_TI816X (1 << 14) - -#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) - -#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ - CHIP_IS_OMAP4430ES2 | \ - CHIP_IS_OMAP4430ES2_1 | \ - CHIP_IS_OMAP4430ES2_2) +#define OMAP446X_CLASS 0x44600044 +#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) -/* - * "GE" here represents "greater than or equal to" in terms of ES - * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430 - * chips at ES2 and beyond, but not, for example, any OMAP lines after - * OMAP3. - */ -#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ - CHIP_IS_OMAP3430ES3_0 | \ - CHIP_GE_OMAP3430ES3_1) -#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \ - CHIP_IS_OMAP3630ES1 | \ - CHIP_GE_OMAP3630ES1_1) -#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \ - CHIP_IS_OMAP3630ES1_2) - -int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); /* * Runtime detection of OMAP3 features */ -extern u32 omap3_features; +extern u32 omap_features; #define OMAP3_HAS_L2CACHE BIT(0) #define OMAP3_HAS_IVA BIT(1) @@ -478,11 +410,15 @@ extern u32 omap3_features; #define OMAP3_HAS_192MHZ_CLK BIT(5) #define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_SDRC BIT(7) +#define OMAP4_HAS_MPU_1GHZ BIT(8) +#define OMAP4_HAS_MPU_1_2GHZ BIT(9) +#define OMAP4_HAS_MPU_1_5GHZ BIT(10) + #define OMAP3_HAS_FEATURE(feat,flag) \ static inline unsigned int omap3_has_ ##feat(void) \ { \ - return (omap3_features & OMAP3_HAS_ ##flag); \ + return omap_features & OMAP3_HAS_ ##flag; \ } \ OMAP3_HAS_FEATURE(l2cache, L2CACHE) @@ -494,4 +430,19 @@ OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) OMAP3_HAS_FEATURE(sdrc, SDRC) +/* + * Runtime detection of OMAP4 features + */ +extern u32 omap_features; + +#define OMAP4_HAS_FEATURE(feat, flag) \ +static inline unsigned int omap4_has_ ##feat(void) \ +{ \ + return omap_features & OMAP4_HAS_ ##flag; \ +} \ + +OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) +OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) +OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) + #endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index d1c916fcf770..dc562a5c0a8a 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -195,6 +195,11 @@ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index d6c70d2f4030..d11025e6e7a4 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dmtimer.h + * arch/arm/plat-omap/include/plat/dmtimer.h * * OMAP Dual-Mode Timers * @@ -32,6 +32,11 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/platform_device.h> + #ifndef __ASM_ARCH_DMTIMER_H #define __ASM_ARCH_DMTIMER_H @@ -55,16 +60,56 @@ * in OMAP4 can be distinguished. */ #define OMAP_TIMER_IP_VERSION_1 0x1 + +/* timer capabilities used in hwmod database */ +#define OMAP_TIMER_SECURE 0x80000000 +#define OMAP_TIMER_ALWON 0x40000000 +#define OMAP_TIMER_HAS_PWM 0x20000000 + +struct omap_timer_capability_dev_attr { + u32 timer_capability; +}; + struct omap_dm_timer; -extern struct omap_dm_timer *gptimer_wakeup; -extern struct sys_timer omap_timer; struct clk; -int omap_dm_timer_init(void); +struct timer_regs { + u32 tidr; + u32 tiocp_cfg; + u32 tistat; + u32 tisr; + u32 tier; + u32 twer; + u32 tclr; + u32 tcrr; + u32 tldr; + u32 ttrg; + u32 twps; + u32 tmar; + u32 tcar1; + u32 tsicr; + u32 tcar2; + u32 tpir; + u32 tnir; + u32 tcvr; + u32 tocr; + u32 towr; +}; + +struct dmtimer_platform_data { + int (*set_timer_src)(struct platform_device *pdev, int source); + int timer_ip_version; + u32 needs_manual_reset:1; + bool reserved; + + bool loses_context; + + u32 (*get_context_loss_count)(struct device *dev); +}; struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); -void omap_dm_timer_free(struct omap_dm_timer *timer); +int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); @@ -73,25 +118,310 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer); u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer); -void omap_dm_timer_trigger(struct omap_dm_timer *timer); -void omap_dm_timer_start(struct omap_dm_timer *timer); -void omap_dm_timer_stop(struct omap_dm_timer *timer); +int omap_dm_timer_trigger(struct omap_dm_timer *timer); +int omap_dm_timer_start(struct omap_dm_timer *timer); +int omap_dm_timer_stop(struct omap_dm_timer *timer); int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); -void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); -void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); -void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); +int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); +int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); +int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); +int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); +int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); -void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); -void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); -void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); int omap_dm_timers_active(void); +/* + * Do not use the defines below, they are not needed. They should be only + * used by dmtimer.c and sys_timer related code. + */ + +/* + * The interrupt registers are different between v1 and v2 ip. + * These registers are offsets from timer->iobase. + */ +#define OMAP_TIMER_ID_OFFSET 0x00 +#define OMAP_TIMER_OCP_CFG_OFFSET 0x10 + +#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14 +#define OMAP_TIMER_V1_STAT_OFFSET 0x18 +#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c + +#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24 +#define OMAP_TIMER_V2_IRQSTATUS 0x28 +#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c +#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30 + +/* + * The functional registers have a different base on v1 and v2 ip. + * These registers are offsets from timer->func_base. The func_base + * is samae as io_base for v1 and io_base + 0x14 for v2 ip. + * + */ +#define OMAP_TIMER_V2_FUNC_OFFSET 0x14 + +#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 +#define _OMAP_TIMER_CTRL_OFFSET 0x24 +#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) +#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) +#define OMAP_TIMER_CTRL_PT (1 << 12) +#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) +#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) +#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) +#define OMAP_TIMER_CTRL_SCPWM (1 << 7) +#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ +#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ +#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ +#define OMAP_TIMER_CTRL_POSTED (1 << 2) +#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ +#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ +#define _OMAP_TIMER_COUNTER_OFFSET 0x28 +#define _OMAP_TIMER_LOAD_OFFSET 0x2c +#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 +#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 +#define WP_NONE 0 /* no write pending bit */ +#define WP_TCLR (1 << 0) +#define WP_TCRR (1 << 1) +#define WP_TLDR (1 << 2) +#define WP_TTGR (1 << 3) +#define WP_TMAR (1 << 4) +#define WP_TPIR (1 << 5) +#define WP_TNIR (1 << 6) +#define WP_TCVR (1 << 7) +#define WP_TOCR (1 << 8) +#define WP_TOWR (1 << 9) +#define _OMAP_TIMER_MATCH_OFFSET 0x38 +#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c +#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 +#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ +#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ +#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ +#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ + +/* register offsets with the write pending bit encoded */ +#define WPSHIFT 16 + +#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ + | (WP_TCLR << WPSHIFT)) + +#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ + | (WP_TCRR << WPSHIFT)) + +#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ + | (WP_TLDR << WPSHIFT)) + +#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ + | (WP_TTGR << WPSHIFT)) + +#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ + | (WP_TMAR << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ + | (WP_TPIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ + | (WP_TNIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ + | (WP_TCVR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ + (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ + (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) + +struct omap_dm_timer { + unsigned long phys_base; + int id; + int irq; + struct clk *iclk, *fclk; + + void __iomem *io_base; + void __iomem *sys_stat; /* TISTAT timer status */ + void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ + void __iomem *irq_ena; /* irq enable */ + void __iomem *irq_dis; /* irq disable, only on v2 ip */ + void __iomem *pend; /* write pending */ + void __iomem *func_base; /* function register base */ + + unsigned long rate; + unsigned reserved:1; + unsigned posted:1; + struct timer_regs context; + bool loses_context; + int ctx_loss_count; + int revision; + struct platform_device *pdev; + struct list_head node; + + u32 (*get_context_loss_count)(struct device *dev); +}; + +int omap_dm_timer_prepare(struct omap_dm_timer *timer); + +static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, + int posted) +{ + if (posted) + while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + cpu_relax(); + + return __raw_readl(timer->func_base + (reg & 0xff)); +} + +static inline void __omap_dm_timer_write(struct omap_dm_timer *timer, + u32 reg, u32 val, int posted) +{ + if (posted) + while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + cpu_relax(); + + __raw_writel(val, timer->func_base + (reg & 0xff)); +} + +static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) +{ + u32 tidr; + + /* Assume v1 ip if bits [31:16] are zero */ + tidr = __raw_readl(timer->io_base); + if (!(tidr >> 16)) { + timer->revision = 1; + timer->sys_stat = timer->io_base + + OMAP_TIMER_V1_SYS_STAT_OFFSET; + timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; + timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; + timer->irq_dis = 0; + timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; + timer->func_base = timer->io_base; + } else { + timer->revision = 2; + timer->sys_stat = 0; + timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; + timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; + timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; + timer->pend = timer->io_base + + _OMAP_TIMER_WRITE_PEND_OFFSET + + OMAP_TIMER_V2_FUNC_OFFSET; + timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET; + } +} + +/* Assumes the source clock has been set by caller */ +static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer, + int autoidle, int wakeup) +{ + u32 l; + + l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); + l |= 0x02 << 3; /* Set to smart-idle mode */ + l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ + + if (autoidle) + l |= 0x1 << 0; + + if (wakeup) + l |= 1 << 2; + + __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); + + /* Match hardware reset default of posted mode */ + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, + OMAP_TIMER_CTRL_POSTED, 0); +} + +static inline int __omap_dm_timer_set_source(struct clk *timer_fck, + struct clk *parent) +{ + int ret; + + clk_disable(timer_fck); + ret = clk_set_parent(timer_fck, parent); + clk_enable(timer_fck); + + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ + __delay(300000); + + return ret; +} + +static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, + int posted, unsigned long rate) +{ + u32 l; + + l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted); + if (l & OMAP_TIMER_CTRL_ST) { + l &= ~0x1; + __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted); +#ifdef CONFIG_ARCH_OMAP2PLUS + /* Readback to make sure write has completed */ + __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted); + /* + * Wait for functional clock period x 3.5 to make sure that + * timer is stopped + */ + udelay(3500000 / rate + 1); +#endif + } + + /* Ack possibly pending interrupt */ + __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); +} + +static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, + u32 ctrl, unsigned int load, + int posted) +{ + __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted); + __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted); +} + +static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer, + unsigned int value) +{ + __raw_writel(value, timer->irq_ena); + __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0); +} + +static inline unsigned int +__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted) +{ + return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted); +} + +static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer, + unsigned int value) +{ + __raw_writel(value, timer->irq_stat); +} #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 91e8de3db085..9e86ee0aed0a 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -222,26 +222,6 @@ extern void omap_gpio_restore_context(void); #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - static inline int irq_to_gpio(unsigned irq) { int tmp; diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 878d632c4092..7c22b9e10dc3 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -22,6 +22,7 @@ #define __ASM__ARCH_OMAP_I2C_H #include <linux/i2c.h> +#include <linux/i2c-omap.h> #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, @@ -46,10 +47,13 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, */ struct omap_i2c_dev_attr { u8 fifo_depth; - u8 flags; + u32 flags; }; void __init omap1_i2c_mux_pins(int bus_id); void __init omap2_i2c_mux_pins(int bus_id); +struct omap_hwmod; +int omap_i2c_reset(struct omap_hwmod *oh); + #endif /* __ASM__ARCH_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index d72ec85c97e6..7f2969eadb85 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -228,13 +228,13 @@ #define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE /* 0x4d000000 --> 0xfd200000 */ -#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) #define OMAP44XX_EMIF2_SIZE SZ_1M +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE) #define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE /* 0x4e000000 --> 0xfd300000 */ -#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) #define OMAP44XX_DMM_SIZE SZ_1M +#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE) /* * ---------------------------------------------------------------------------- * Omap specific register access @@ -247,6 +247,8 @@ * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ +void omap_ioremap_init(void); + extern u8 omap_readb(u32 pa); extern u16 omap_readw(u32 pa); extern u32 omap_readl(u32 pa); @@ -256,8 +258,31 @@ extern void omap_writel(u32 v, u32 pa); struct omap_sdrc_params; -extern void omap1_map_common_io(void); -extern void omap1_init_common_hw(void); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +void omap7xx_map_io(void); +#else +static inline void omap_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP15XX +void omap15xx_map_io(void); +#else +static inline void omap15xx_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP16XX +void omap16xx_map_io(void); +#else +static inline void omap16xx_map_io(void) +{ +} +#endif + +void omap1_init_early(void); #ifdef CONFIG_SOC_OMAP2420 extern void omap242x_map_common_io(void); @@ -300,7 +325,7 @@ static inline void omap44xx_map_common_io(void) #endif extern void omap2_init_common_infrastructure(void); -extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, +extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); #define __arch_ioremap omap_ioremap @@ -309,6 +334,8 @@ extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); void omap_iounmap(volatile void __iomem *addr); +extern void __init omap_init_consistent_dma_size(void); + #endif #endif diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 174f1b9c8c03..a1d79ee19250 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -25,16 +25,17 @@ struct iotlb_entry { }; }; -struct iommu { +struct omap_iommu { const char *name; struct module *owner; struct clk *clk; void __iomem *regbase; struct device *dev; void *isr_priv; + struct iommu_domain *domain; unsigned int refcount; - struct mutex iommu_lock; /* global for this whole object */ + spinlock_t iommu_lock; /* global for this whole object */ /* * We don't change iopgd for a situation like pgd for a task, @@ -48,8 +49,6 @@ struct iommu { struct list_head mmap; struct mutex mmap_lock; /* protect mmap */ - int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, void *priv); - void *ctx; /* iommu context: registres saved area */ u32 da_start; u32 da_end; @@ -81,25 +80,27 @@ struct iotlb_lock { struct iommu_functions { unsigned long version; - int (*enable)(struct iommu *obj); - void (*disable)(struct iommu *obj); - void (*set_twl)(struct iommu *obj, bool on); - u32 (*fault_isr)(struct iommu *obj, u32 *ra); + int (*enable)(struct omap_iommu *obj); + void (*disable)(struct omap_iommu *obj); + void (*set_twl)(struct omap_iommu *obj, bool on); + u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra); - void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); - void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr); + void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr); + void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr); - struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e); + struct cr_regs *(*alloc_cr)(struct omap_iommu *obj, + struct iotlb_entry *e); int (*cr_valid)(struct cr_regs *cr); u32 (*cr_to_virt)(struct cr_regs *cr); void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); - ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf); + ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr, + char *buf); u32 (*get_pte_attr)(struct iotlb_entry *e); - void (*save_ctx)(struct iommu *obj); - void (*restore_ctx)(struct iommu *obj); - ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len); + void (*save_ctx)(struct omap_iommu *obj); + void (*restore_ctx)(struct omap_iommu *obj); + ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len); }; struct iommu_platform_data { @@ -150,40 +151,31 @@ struct iommu_platform_data { /* * global functions */ -extern u32 iommu_arch_version(void); - -extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); -extern u32 iotlb_cr_to_virt(struct cr_regs *cr); - -extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); -extern void iommu_set_twl(struct iommu *obj, bool on); -extern void flush_iotlb_page(struct iommu *obj, u32 da); -extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); -extern void flush_iotlb_all(struct iommu *obj); - -extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); -extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, - u32 **ppte); -extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); - -extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end); -extern struct iommu *iommu_get(const char *name); -extern void iommu_put(struct iommu *obj); -extern int iommu_set_isr(const char *name, - int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, +extern u32 omap_iommu_arch_version(void); + +extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); + +extern int +omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e); + +extern int omap_iommu_set_isr(const char *name, + int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs, void *priv), void *isr_priv); -extern void iommu_save_ctx(struct iommu *obj); -extern void iommu_restore_ctx(struct iommu *obj); +extern void omap_iommu_save_ctx(struct omap_iommu *obj); +extern void omap_iommu_restore_ctx(struct omap_iommu *obj); -extern int install_iommu_arch(const struct iommu_functions *ops); -extern void uninstall_iommu_arch(const struct iommu_functions *ops); +extern int omap_install_iommu_arch(const struct iommu_functions *ops); +extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops); -extern int foreach_iommu_device(void *data, +extern int omap_foreach_iommu_device(void *data, int (*fn)(struct device *, void *)); -extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len); -extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len); +extern ssize_t +omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len); +extern size_t +omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len); +struct device *omap_find_iommu_device(const char *name); #endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h index 10ad05f410e9..d4116b595e40 100644 --- a/arch/arm/plat-omap/include/plat/iommu2.h +++ b/arch/arm/plat-omap/include/plat/iommu2.h @@ -83,12 +83,12 @@ /* * register accessors */ -static inline u32 iommu_read_reg(struct iommu *obj, size_t offs) +static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs) { return __raw_readl(obj->regbase + offs); } -static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs) +static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs) { __raw_writel(val, obj->regbase + offs); } diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h new file mode 100644 index 000000000000..66a813977d52 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/iopgtable.h @@ -0,0 +1,120 @@ +/* + * omap iommu: pagetable definitions + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_OMAP_IOMMU_H +#define __PLAT_OMAP_IOMMU_H + +/* + * "L2 table" address mask and size definitions. + */ +#define IOPGD_SHIFT 20 +#define IOPGD_SIZE (1UL << IOPGD_SHIFT) +#define IOPGD_MASK (~(IOPGD_SIZE - 1)) + +/* + * "section" address mask and size definitions. + */ +#define IOSECTION_SHIFT 20 +#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT) +#define IOSECTION_MASK (~(IOSECTION_SIZE - 1)) + +/* + * "supersection" address mask and size definitions. + */ +#define IOSUPER_SHIFT 24 +#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT) +#define IOSUPER_MASK (~(IOSUPER_SIZE - 1)) + +#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT)) +#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32)) + +/* + * "small page" address mask and size definitions. + */ +#define IOPTE_SHIFT 12 +#define IOPTE_SIZE (1UL << IOPTE_SHIFT) +#define IOPTE_MASK (~(IOPTE_SIZE - 1)) + +/* + * "large page" address mask and size definitions. + */ +#define IOLARGE_SHIFT 16 +#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT) +#define IOLARGE_MASK (~(IOLARGE_SIZE - 1)) + +#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT)) +#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32)) + +#define IOPAGE_MASK IOPTE_MASK + +/** + * omap_iommu_translate() - va to pa translation + * @d: omap iommu descriptor + * @va: virtual address + * @mask: omap iommu descriptor mask + * + * va to pa translation + */ +static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask) +{ + return (d & mask) | (va & (~mask)); +} + +/* + * some descriptor attributes. + */ +#define IOPGD_TABLE (1 << 0) +#define IOPGD_SECTION (2 << 0) +#define IOPGD_SUPER (1 << 18 | 2 << 0) + +#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE) +#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION) +#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER) + +#define IOPTE_SMALL (2 << 0) +#define IOPTE_LARGE (1 << 0) + +#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL) +#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE) + +/* to find an entry in a page-table-directory */ +#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) +#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) + +#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) +#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd))) + +/* to find an entry in the second-level page table. */ +#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) +#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da)) + +static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, + u32 flags) +{ + memset(e, 0, sizeof(*e)); + + e->da = da; + e->pa = pa; + e->valid = 1; + /* FIXME: add OMAP1 support */ + e->pgsz = flags & MMU_CAM_PGSZ_MASK; + e->endian = flags & MMU_RAM_ENDIAN_MASK; + e->elsz = flags & MMU_RAM_ELSZ_MASK; + e->mixed = flags & MMU_RAM_MIXED_MASK; + + return iopgsz_to_bytes(e->pgsz); +} + +#define to_iommu(dev) \ + (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev)) + +#endif /* __PLAT_OMAP_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h index e992b9655fbc..6af1a91c0f36 100644 --- a/arch/arm/plat-omap/include/plat/iovmm.h +++ b/arch/arm/plat-omap/include/plat/iovmm.h @@ -13,8 +13,10 @@ #ifndef __IOMMU_MMAP_H #define __IOMMU_MMAP_H +#include <linux/iommu.h> + struct iovm_struct { - struct iommu *iommu; /* iommu object which this belongs to */ + struct omap_iommu *iommu; /* iommu object which this belongs to */ u32 da_start; /* area definition */ u32 da_end; u32 flags; /* IOVMF_: see below */ @@ -70,20 +72,18 @@ struct iovm_struct { #define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) -extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da); -extern u32 iommu_vmap(struct iommu *obj, u32 da, +extern struct iovm_struct *omap_find_iovm_area(struct omap_iommu *obj, u32 da); +extern u32 +omap_iommu_vmap(struct iommu_domain *domain, struct omap_iommu *obj, u32 da, const struct sg_table *sgt, u32 flags); -extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da); -extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, - u32 flags); -extern void iommu_vfree(struct iommu *obj, const u32 da); -extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, - u32 flags); -extern void iommu_kunmap(struct iommu *obj, u32 da); -extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, - u32 flags); -extern void iommu_kfree(struct iommu *obj, u32 da); - -extern void *da_to_va(struct iommu *obj, u32 da); +extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, + struct omap_iommu *obj, u32 da); +extern u32 +omap_iommu_vmalloc(struct iommu_domain *domain, struct omap_iommu *obj, + u32 da, size_t bytes, u32 flags); +extern void +omap_iommu_vfree(struct iommu_domain *domain, struct omap_iommu *obj, + const u32 da); +extern void *omap_da_to_va(struct omap_iommu *obj, u32 da); #endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 5a25098ea7ea..30e10719b774 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,6 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 +#define INT_35XX_UART4 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 @@ -407,11 +408,19 @@ #endif #define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) +#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END +#ifdef CONFIG_TWL6040_CODEC +#define TWL6040_CODEC_NR_IRQS 6 +#else +#define TWL6040_CODEC_NR_IRQS 0 +#endif +#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) + /* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END) +#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) #define TWL_IRQ_END TWL4030_GPIO_IRQ_END #else -#define TWL_IRQ_END TWL6030_IRQ_END +#define TWL_IRQ_END TWL6040_CODEC_IRQ_END #endif /* GPMC related */ @@ -428,7 +437,11 @@ #define INTCPS_NR_IRQS 96 #ifndef __ASSEMBLY__ -extern void omap_init_irq(void); +extern void __iomem *omap_irq_base; +void omap1_init_irq(void); +void omap2_init_irq(void); +void omap3_init_irq(void); +void ti816x_init_irq(void); extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index f8f690ab2997..8fa74e2c9d6e 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -24,121 +24,74 @@ #ifndef __ASM_ARCH_OMAP_MCBSP_H #define __ASM_ARCH_OMAP_MCBSP_H -#include <linux/completion.h> #include <linux/spinlock.h> - -#include <mach/hardware.h> -#include <plat/clock.h> +#include <linux/clk.h> /* macro for building platform_device for McBSP ports */ #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ static struct platform_device omap_mcbsp##port_nr = { \ .name = "omap-mcbsp-dai", \ - .id = OMAP_MCBSP##port_nr, \ + .id = port_nr - 1, \ } #define MCBSP_CONFIG_TYPE2 0x2 #define MCBSP_CONFIG_TYPE3 0x3 #define MCBSP_CONFIG_TYPE4 0x4 -#define OMAP7XX_MCBSP1_BASE 0xfffb1000 -#define OMAP7XX_MCBSP2_BASE 0xfffb1800 - -#define OMAP1510_MCBSP1_BASE 0xe1011800 -#define OMAP1510_MCBSP2_BASE 0xfffb1000 -#define OMAP1510_MCBSP3_BASE 0xe1017000 - -#define OMAP1610_MCBSP1_BASE 0xe1011800 -#define OMAP1610_MCBSP2_BASE 0xfffb1000 -#define OMAP1610_MCBSP3_BASE 0xe1017000 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x02 -#define OMAP_MCBSP_REG_DXR2 0x04 -#define OMAP_MCBSP_REG_DXR1 0x06 -#define OMAP_MCBSP_REG_DRR 0x02 -#define OMAP_MCBSP_REG_DXR 0x06 -#define OMAP_MCBSP_REG_SPCR2 0x08 -#define OMAP_MCBSP_REG_SPCR1 0x0a -#define OMAP_MCBSP_REG_RCR2 0x0c -#define OMAP_MCBSP_REG_RCR1 0x0e -#define OMAP_MCBSP_REG_XCR2 0x10 -#define OMAP_MCBSP_REG_XCR1 0x12 -#define OMAP_MCBSP_REG_SRGR2 0x14 -#define OMAP_MCBSP_REG_SRGR1 0x16 -#define OMAP_MCBSP_REG_MCR2 0x18 -#define OMAP_MCBSP_REG_MCR1 0x1a -#define OMAP_MCBSP_REG_RCERA 0x1c -#define OMAP_MCBSP_REG_RCERB 0x1e -#define OMAP_MCBSP_REG_XCERA 0x20 -#define OMAP_MCBSP_REG_XCERB 0x22 -#define OMAP_MCBSP_REG_PCR0 0x24 -#define OMAP_MCBSP_REG_RCERC 0x26 -#define OMAP_MCBSP_REG_RCERD 0x28 -#define OMAP_MCBSP_REG_XCERC 0x2A -#define OMAP_MCBSP_REG_XCERD 0x2C -#define OMAP_MCBSP_REG_RCERE 0x2E -#define OMAP_MCBSP_REG_RCERF 0x30 -#define OMAP_MCBSP_REG_XCERE 0x32 -#define OMAP_MCBSP_REG_XCERF 0x34 -#define OMAP_MCBSP_REG_RCERG 0x36 -#define OMAP_MCBSP_REG_RCERH 0x38 -#define OMAP_MCBSP_REG_XCERG 0x3A -#define OMAP_MCBSP_REG_XCERH 0x3C - -/* Dummy defines, these are not available on omap1 */ -#define OMAP_MCBSP_REG_XCCR 0x00 -#define OMAP_MCBSP_REG_RCCR 0x00 - -#else - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x04 -#define OMAP_MCBSP_REG_DXR2 0x08 -#define OMAP_MCBSP_REG_DXR1 0x0C -#define OMAP_MCBSP_REG_DRR 0x00 -#define OMAP_MCBSP_REG_DXR 0x08 -#define OMAP_MCBSP_REG_SPCR2 0x10 -#define OMAP_MCBSP_REG_SPCR1 0x14 -#define OMAP_MCBSP_REG_RCR2 0x18 -#define OMAP_MCBSP_REG_RCR1 0x1C -#define OMAP_MCBSP_REG_XCR2 0x20 -#define OMAP_MCBSP_REG_XCR1 0x24 -#define OMAP_MCBSP_REG_SRGR2 0x28 -#define OMAP_MCBSP_REG_SRGR1 0x2C -#define OMAP_MCBSP_REG_MCR2 0x30 -#define OMAP_MCBSP_REG_MCR1 0x34 -#define OMAP_MCBSP_REG_RCERA 0x38 -#define OMAP_MCBSP_REG_RCERB 0x3C -#define OMAP_MCBSP_REG_XCERA 0x40 -#define OMAP_MCBSP_REG_XCERB 0x44 -#define OMAP_MCBSP_REG_PCR0 0x48 -#define OMAP_MCBSP_REG_RCERC 0x4C -#define OMAP_MCBSP_REG_RCERD 0x50 -#define OMAP_MCBSP_REG_XCERC 0x54 -#define OMAP_MCBSP_REG_XCERD 0x58 -#define OMAP_MCBSP_REG_RCERE 0x5C -#define OMAP_MCBSP_REG_RCERF 0x60 -#define OMAP_MCBSP_REG_XCERE 0x64 -#define OMAP_MCBSP_REG_XCERF 0x68 -#define OMAP_MCBSP_REG_RCERG 0x6C -#define OMAP_MCBSP_REG_RCERH 0x70 -#define OMAP_MCBSP_REG_XCERG 0x74 -#define OMAP_MCBSP_REG_XCERH 0x78 -#define OMAP_MCBSP_REG_SYSCON 0x8C -#define OMAP_MCBSP_REG_THRSH2 0x90 -#define OMAP_MCBSP_REG_THRSH1 0x94 -#define OMAP_MCBSP_REG_IRQST 0xA0 -#define OMAP_MCBSP_REG_IRQEN 0xA4 -#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 -#define OMAP_MCBSP_REG_XCCR 0xAC -#define OMAP_MCBSP_REG_RCCR 0xB0 -#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4 -#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8 -#define OMAP_MCBSP_REG_SSELCR 0xBC +/* McBSP register numbers. Register address offset = num * reg_step */ +enum { + /* Common registers */ + OMAP_MCBSP_REG_SPCR2 = 4, + OMAP_MCBSP_REG_SPCR1, + OMAP_MCBSP_REG_RCR2, + OMAP_MCBSP_REG_RCR1, + OMAP_MCBSP_REG_XCR2, + OMAP_MCBSP_REG_XCR1, + OMAP_MCBSP_REG_SRGR2, + OMAP_MCBSP_REG_SRGR1, + OMAP_MCBSP_REG_MCR2, + OMAP_MCBSP_REG_MCR1, + OMAP_MCBSP_REG_RCERA, + OMAP_MCBSP_REG_RCERB, + OMAP_MCBSP_REG_XCERA, + OMAP_MCBSP_REG_XCERB, + OMAP_MCBSP_REG_PCR0, + OMAP_MCBSP_REG_RCERC, + OMAP_MCBSP_REG_RCERD, + OMAP_MCBSP_REG_XCERC, + OMAP_MCBSP_REG_XCERD, + OMAP_MCBSP_REG_RCERE, + OMAP_MCBSP_REG_RCERF, + OMAP_MCBSP_REG_XCERE, + OMAP_MCBSP_REG_XCERF, + OMAP_MCBSP_REG_RCERG, + OMAP_MCBSP_REG_RCERH, + OMAP_MCBSP_REG_XCERG, + OMAP_MCBSP_REG_XCERH, + + /* OMAP1-OMAP2420 registers */ + OMAP_MCBSP_REG_DRR2 = 0, + OMAP_MCBSP_REG_DRR1, + OMAP_MCBSP_REG_DXR2, + OMAP_MCBSP_REG_DXR1, + + /* OMAP2430 and onwards */ + OMAP_MCBSP_REG_DRR = 0, + OMAP_MCBSP_REG_DXR = 2, + OMAP_MCBSP_REG_SYSCON = 35, + OMAP_MCBSP_REG_THRSH2, + OMAP_MCBSP_REG_THRSH1, + OMAP_MCBSP_REG_IRQST = 40, + OMAP_MCBSP_REG_IRQEN, + OMAP_MCBSP_REG_WAKEUPEN, + OMAP_MCBSP_REG_XCCR, + OMAP_MCBSP_REG_RCCR, + OMAP_MCBSP_REG_XBUFFSTAT, + OMAP_MCBSP_REG_RBUFFSTAT, + OMAP_MCBSP_REG_SSELCR, +}; +/* OMAP3 sidetone control registers */ #define OMAP_ST_REG_REV 0x00 #define OMAP_ST_REG_SYSCONFIG 0x10 #define OMAP_ST_REG_IRQSTATUS 0x18 @@ -147,8 +100,6 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP_ST_REG_SFIRCR 0x28 #define OMAP_ST_REG_SSELCR 0x2C -#endif - /************************** McBSP SPCR1 bit definitions ***********************/ #define RRST 0x0001 #define RRDY 0x0002 @@ -333,18 +284,6 @@ struct omap_mcbsp_reg_cfg { }; typedef enum { - OMAP_MCBSP1 = 0, - OMAP_MCBSP2, - OMAP_MCBSP3, - OMAP_MCBSP4, - OMAP_MCBSP5 -} omap_mcbsp_id; - -typedef int __bitwise omap_mcbsp_io_type_t; -#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) -#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) - -typedef enum { OMAP_MCBSP_WORD_8 = 0, OMAP_MCBSP_WORD_12, OMAP_MCBSP_WORD_16, @@ -353,56 +292,24 @@ typedef enum { OMAP_MCBSP_WORD_32, } omap_mcbsp_word_length; -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); - int (*set_clks_src)(u8, u8); }; struct omap_mcbsp_platform_data { - unsigned long phys_base; - u8 dma_rx_sync, dma_tx_sync; - u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; -#ifdef CONFIG_ARCH_OMAP3 - /* Sidetone block for McBSP 2 and 3 */ - unsigned long phys_base_st; -#endif u16 buffer_size; - unsigned int mcbsp_config_type; + u8 reg_size; + u8 reg_step; + + /* McBSP platform and instance specific features */ + bool has_wakeup; /* Wakeup capability */ + bool has_ccr; /* Transceiver has configuration control registers */ + int (*enable_st_clock)(unsigned int, bool); + int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src); + int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; struct omap_mcbsp_st_data { @@ -422,38 +329,24 @@ struct omap_mcbsp { void __iomem *io_base; u8 id; u8 free; - omap_mcbsp_word_length rx_word_length; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_io_type_t io_type; /* IRQ or poll */ - /* IRQ based TX/RX */ int rx_irq; int tx_irq; /* DMA stuff */ u8 dma_rx_sync; - short dma_rx_lch; u8 dma_tx_sync; - short dma_tx_lch; - - /* Completion queues */ - struct completion tx_irq_completion; - struct completion rx_irq_completion; - struct completion tx_dma_completion; - struct completion rx_dma_completion; /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; struct omap_mcbsp_platform_data *pdata; struct clk *fclk; -#ifdef CONFIG_ARCH_OMAP3 struct omap_mcbsp_st_data *st_data; int dma_op_mode; u16 max_tx_thres; u16 max_rx_thres; -#endif void *reg_cache; - unsigned int mcbsp_config_type; + int reg_cache_size; }; /** @@ -465,16 +358,10 @@ struct omap_mcbsp_dev_attr { }; extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count, omap_mcbsp_cache_size; - -#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; +extern int omap_mcbsp_count; int omap_mcbsp_init(void); -void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, - struct omap_mcbsp_platform_data *config, int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -#ifdef CONFIG_ARCH_OMAP3 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); @@ -483,40 +370,13 @@ u16 omap_mcbsp_get_fifo_size(unsigned int id); u16 omap_mcbsp_get_tx_delay(unsigned int id); u16 omap_mcbsp_get_rx_delay(unsigned int id); int omap_mcbsp_get_dma_op_mode(unsigned int id); -#else -static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) -{ } -static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) -{ } -static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; } -static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } -#endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); void omap_mcbsp_stop(unsigned int id, int tx, int rx); -void omap_mcbsp_xmit_word(unsigned int id, u32 word); -u32 omap_mcbsp_recv_word(unsigned int id); - -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - /* McBSP functional clock source changing function */ extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); - -/* Polled read/write functions */ -int omap_mcbsp_pollread(unsigned int id, u16 * buf); -int omap_mcbsp_pollwrite(unsigned int id, u16 buf); -int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); /* McBSP signal muxing API */ void omap2_mcbsp1_mux_clkr_src(u8 mux); @@ -525,21 +385,11 @@ void omap2_mcbsp1_mux_fsr_src(u8 mux); int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); -#ifdef CONFIG_ARCH_OMAP3 /* Sidetone specific API */ int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain); int omap_st_enable(unsigned int id); int omap_st_disable(unsigned int id); int omap_st_is_enabled(unsigned int id); -#else -static inline int omap_st_set_chgain(unsigned int id, int channel, - s16 chgain) { return 0; } -static inline int omap_st_get_chgain(unsigned int id, int channel, - s16 *chgain) { return 0; } -static inline int omap_st_enable(unsigned int id) { return 0; } -static inline int omap_st_disable(unsigned int id) { return 0; } -static inline int omap_st_is_enabled(unsigned int id) { return 0; } -#endif #endif diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h deleted file mode 100644 index e6720aa2d553..000000000000 --- a/arch/arm/plat-omap/include/plat/memory.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/memory.h - * - * Memory map for OMAP-1510 and 1610 - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#if defined(CONFIG_ARCH_OMAP1) -#define PLAT_PHYS_OFFSET UL(0x10000000) -#else -#define PLAT_PHYS_OFFSET UL(0x80000000) -#endif - -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - * Note that the is_lbus_device() test is not very efficient on 1510 - * because of the strncmp(). - */ -#ifdef CONFIG_ARCH_OMAP15XX - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - -#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) -#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) - -#define __arch_pfn_to_dma(dev, pfn) \ - ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ - if (is_lbus_device(dev)) \ - __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ - __dma; }) - -#define __arch_dma_to_pfn(dev, addr) \ - ({ dma_addr_t __dma = addr; \ - if (is_lbus_device(dev)) \ - __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \ - __phys_to_pfn(__dma); \ - }) - -#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __phys_to_virt(addr)); }) - -#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ - (dma_addr_t) (is_lbus_device(dev) ? \ - virt_to_lbus(__addr) : \ - __virt_to_phys(__addr)); }) - -#endif /* CONFIG_ARCH_OMAP15XX */ - -/* Override the ARM default */ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - -#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) -#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE -#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 -#endif - -#define CONSISTENT_DMA_SIZE \ - (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) - -#endif - -#endif - diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index c7b874186c27..94cf70afb236 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -31,7 +31,24 @@ #define OMAP_MMC_MAX_SLOTS 2 -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1) +/* + * struct omap_mmc_dev_attr.flags possibilities + * + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag + * should be set if this is the case. See for example Section 22.5.3 + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). + * + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers + * don't work correctly on some MMC controller instances on some + * OMAP3 SoCs; this flag should be set if this is the case. See + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ + * Revision F (October 2010) (SPRZ278F). + */ +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) struct omap_mmc_dev_attr { u8 flags; diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index d86d1ecf0068..67fc5060183e 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -19,15 +19,11 @@ enum nand_io { }; struct omap_nand_platform_data { - unsigned int options; int cs; - int gpio_irq; struct mtd_partition *parts; struct gpmc_timings *gpmc_t; int nr_parts; - int (*nand_setup)(void); - int (*dev_ready)(struct omap_nand_platform_data *); - int dma_channel; + bool dev_ready; int gpmc_irq; enum nand_io xfer_type; unsigned long phys_base; diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index c0a752053039..0840df813f4f 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -40,11 +40,7 @@ * framework starts. The "_if_" is to avoid name collisions with the * PM idle-loop code. */ -#ifdef CONFIG_OMAP_PM_NONE -#define omap_pm_if_early_init() 0 -#else int __init omap_pm_if_early_init(void); -#endif /** * omap_pm_if_init - OMAP PM init code called after clock fw init @@ -52,11 +48,7 @@ int __init omap_pm_if_early_init(void); * The main initialization code. OPP tables are passed in here. The * "_if_" is to avoid name collisions with the PM idle-loop code. */ -#ifdef CONFIG_OMAP_PM_NONE -#define omap_pm_if_init() 0 -#else int __init omap_pm_if_init(void); -#endif /** * omap_pm_if_exit - OMAP PM exit code diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 2b1d9bc1eebb..9fe6c8783236 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -10,5 +10,6 @@ struct omap4_keypad_platform_data { u8 cols; }; -extern int omap4_keyboard_init(struct omap4_keypad_platform_data *); +extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, + struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index ee405b36df4b..12c5b0c345bf 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -68,7 +68,7 @@ extern struct device omap_device_parent; * */ struct omap_device { - struct platform_device pdev; + struct platform_device *pdev; struct omap_hwmod **hwmods; struct omap_device_pm_latency *pm_lats; u32 dev_wakeup_lat; @@ -88,25 +88,20 @@ int omap_device_shutdown(struct platform_device *pdev); /* Core code interface */ -int omap_device_count_resources(struct omap_device *od); -int omap_device_fill_resources(struct omap_device *od, struct resource *res); - -struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); -struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **oh, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); -int omap_device_register(struct omap_device *od); -int omap_early_device_register(struct omap_device *od); - void __iomem *omap_device_get_rt_va(struct omap_device *od); +struct device *omap_device_get_by_hwmod_name(const char *oh_name); /* OMAP PM interface */ int omap_device_align_pm_lat(struct platform_device *pdev, @@ -122,11 +117,6 @@ int omap_device_enable_hwmods(struct omap_device *od); int omap_device_disable_clocks(struct omap_device *od); int omap_device_enable_clocks(struct omap_device *od); -static inline void omap_device_disable_idle_on_suspend(struct omap_device *od) -{ - od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; -} - /* * Entries should be kept in latency order ascending * @@ -157,6 +147,17 @@ struct omap_device_pm_latency { #define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1) /* Get omap_device pointer from platform_device pointer */ -#define to_omap_device(x) container_of((x), struct omap_device, pdev) +static inline struct omap_device *to_omap_device(struct platform_device *pdev) +{ + return pdev ? pdev->archdata.od : NULL; +} + +static inline +void omap_device_disable_idle_on_suspend(struct platform_device *pdev) +{ + struct omap_device *od = to_omap_device(pdev); + + od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; +} #endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 1adea9c62984..5419f1a2aaa4 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -2,6 +2,7 @@ * omap_hwmod macros, structures * * Copyright (C) 2009-2011 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -77,9 +78,13 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; #define HWMOD_IDLEMODE_FORCE (1 << 0) #define HWMOD_IDLEMODE_NO (1 << 1) #define HWMOD_IDLEMODE_SMART (1 << 2) -/* Slave idle mode flag only */ #define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) +/* modulemode control type (SW or HW) */ +#define MODULEMODE_HWCTRL 1 +#define MODULEMODE_SWCTRL 2 + + /** * struct omap_hwmod_mux_info - hwmod specific mux configuration * @pads: array of omap_device_pad entries @@ -98,7 +103,7 @@ struct omap_hwmod_mux_info { /** * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod * @name: name of the IRQ channel (module local name) - * @irq_ch: IRQ channel ID + * @irq: IRQ channel ID (should be non-negative except -1 = terminator) * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -106,13 +111,13 @@ struct omap_hwmod_mux_info { */ struct omap_hwmod_irq_info { const char *name; - u16 irq; + s16 irq; }; /** * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) - * @dma_req: DMA request ID + * @dma_req: DMA request ID (should be non-negative except -1 = terminator) * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -120,7 +125,7 @@ struct omap_hwmod_irq_info { */ struct omap_hwmod_dma_info { const char *name; - u16 dma_req; + s16 dma_req; }; /** @@ -220,7 +225,6 @@ struct omap_hwmod_addr_space { * @clk: interface clock: OMAP clock name * @_clk: pointer to the interface struct clk (filled in at runtime) * @fw: interface firewall data - * @addr_cnt: ARRAY_SIZE(@addr) * @width: OCP data width * @user: initiators using this interface (see OCP_USER_* macros above) * @flags: OCP interface flags (see OCPIF_* macros above) @@ -239,7 +243,6 @@ struct omap_hwmod_ocp_if { union { struct omap_hwmod_omap2_firewall omap2; } fw; - u8 addr_cnt; u8 width; u8 user; u8 flags; @@ -258,6 +261,7 @@ struct omap_hwmod_ocp_if { #define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) #define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) #define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) +#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) /* omap_hwmod_sysconfig.sysc_flags capability flags */ #define SYSC_HAS_AUTOIDLE (1 << 0) @@ -362,9 +366,11 @@ struct omap_hwmod_omap2_prcm { * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { - void __iomem *clkctrl_reg; - void __iomem *rstctrl_reg; + u16 clkctrl_offs; + u16 rstctrl_offs; + u16 context_offs; u8 submodule_wkdep_bit; + u8 modulemode; }; @@ -468,8 +474,8 @@ struct omap_hwmod_class { * @name: name of the hwmod * @class: struct omap_hwmod_class * to the class of this hwmod * @od: struct omap_device currently associated with this hwmod (internal use) - * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) - * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt) + * @mpu_irqs: ptr to an array of MPU IRQs + * @sdma_reqs: ptr to an array of System DMA request IDs * @prcm: PRCM data pertaining to this hwmod * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) @@ -482,8 +488,6 @@ struct omap_hwmod_class { * @_sysc_cache: internal-use hwmod flags * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port_index: cached MPU register target slave ID (internal use) - * @mpu_irqs_cnt: number of @mpu_irqs - * @sdma_reqs_cnt: number of @sdma_reqs * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -492,7 +496,6 @@ struct omap_hwmod_class { * @_state: internal-use hwmod state * @_postsetup_state: internal-use state to leave the hwmod in after _setup() * @flags: hwmod flags (documented below) - * @omap_chip: OMAP chips this hwmod is present on * @_lock: spinlock serializing operations on this hwmod * @node: list node for hwmod list (internal use) * @@ -519,8 +522,9 @@ struct omap_hwmod { const char *main_clk; struct clk *_clk; struct omap_hwmod_opt_clk *opt_clks; + char *clkdm_name; + struct clockdomain *clkdm; char *vdd_name; - struct voltagedomain *voltdm; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; @@ -531,8 +535,6 @@ struct omap_hwmod { u16 flags; u8 _mpu_port_index; u8 response_lat; - u8 mpu_irqs_cnt; - u8 sdma_reqs_cnt; u8 rst_lines_cnt; u8 opt_clks_cnt; u8 masters_cnt; @@ -541,7 +543,6 @@ struct omap_hwmod { u8 _int_flags; u8 _state; u8 _postsetup_state; - const struct omap_chip_id omap_chip; }; int omap_hwmod_register(struct omap_hwmod **ohs); @@ -572,6 +573,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); +int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 2723f9166ea2..1ab9fd6abe6d 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -16,8 +16,8 @@ #include <linux/init.h> /* - * Memory entry used for the DEBUG_LL UART configuration. See also - * uncompress.h and debug-macro.S. + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. * * Note that using a memory location for storing the UART configuration * has at least two limitations: @@ -27,7 +27,7 @@ * 2. We assume printascii is called at least once before paging_init, * and addruart has a chance to read OMAP_UART_INFO */ -#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc) +#define OMAP_UART_INFO_OFS 0x3ffc /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 @@ -56,6 +56,9 @@ #define TI816X_UART2_BASE 0x48022000 #define TI816X_UART3_BASE 0x48024000 +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ac4b60d9aa29..2f472e989ec6 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -36,7 +36,13 @@ int uart_shift; */ static void set_omap_uart_info(unsigned char port) { - *(volatile u32 *)OMAP_UART_INFO = port; + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; } static void putc(int c) @@ -148,6 +154,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, devkit8000); DEBUG_LL_OMAP3(3, igep0020); diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h new file mode 100644 index 000000000000..0a6a482ec014 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -0,0 +1,20 @@ +/* + * OMAP Voltage Management Routines + * + * Copyright (C) 2011, Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_VOLTAGE_H +#define __ARCH_ARM_OMAP_VOLTAGE_H + +struct voltagedomain; + +struct voltagedomain *voltdm_lookup(const char *name); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); + +#endif |