diff options
Diffstat (limited to 'arch/arm/mach-omap2/hsmmc.c')
| -rw-r--r-- | arch/arm/mach-omap2/hsmmc.c | 421 | 
1 files changed, 279 insertions, 142 deletions
| diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 34272e4863fd..137e1a5f3d85 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -16,7 +16,10 @@  #include <mach/hardware.h>  #include <plat/mmc.h>  #include <plat/omap-pm.h> +#include <plat/mux.h> +#include <plat/omap_device.h> +#include "mux.h"  #include "hsmmc.h"  #include "control.h" @@ -28,10 +31,6 @@ static u16 control_mmc1;  #define HSMMC_NAME_LEN	9 -static struct hsmmc_controller { -	char				name[HSMMC_NAME_LEN + 1]; -} hsmmc[OMAP34XX_NR_MMC]; -  #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)  static int hsmmc_get_context_loss(struct device *dev) @@ -204,174 +203,312 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on,  	return 0;  } -static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; - -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, +			int controller_nr)  { -	struct omap2_hsmmc_info *c; -	int nr_hsmmc = ARRAY_SIZE(hsmmc_data); -	int i; -	u32 reg; - -	if (!cpu_is_omap44xx()) { -		if (cpu_is_omap2430()) { -			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; -			control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; -		} else { -			control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; -			control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; -		} -	} else { -		control_pbias_offset = -			OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; -		control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; -		reg = omap4_ctrl_pad_readl(control_mmc1); -		reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | -			OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); -		reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | -			OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); -		reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| -			OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | -			OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); -		omap4_ctrl_pad_writel(reg, control_mmc1); -	} - -	for (c = controllers; c->mmc; c++) { -		struct hsmmc_controller *hc = hsmmc + c->mmc - 1; -		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; - -		if (!c->mmc || c->mmc > nr_hsmmc) { -			pr_debug("MMC%d: no such controller\n", c->mmc); -			continue; -		} -		if (mmc) { -			pr_debug("MMC%d: already configured\n", c->mmc); -			continue; +	if ((mmc_controller->slots[0].switch_pin > 0) && \ +		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) +		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, +					OMAP_PIN_INPUT_PULLUP); +	if ((mmc_controller->slots[0].gpio_wp > 0) && \ +		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) +		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, +					OMAP_PIN_INPUT_PULLUP); +	if (cpu_is_omap34xx()) { +		if (controller_nr == 0) { +			omap_mux_init_signal("sdmmc1_clk", +				OMAP_PIN_INPUT_PULLUP); +			omap_mux_init_signal("sdmmc1_cmd", +				OMAP_PIN_INPUT_PULLUP); +			omap_mux_init_signal("sdmmc1_dat0", +				OMAP_PIN_INPUT_PULLUP); +			if (mmc_controller->slots[0].caps & +				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { +				omap_mux_init_signal("sdmmc1_dat1", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc1_dat2", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc1_dat3", +					OMAP_PIN_INPUT_PULLUP); +			} +			if (mmc_controller->slots[0].caps & +						MMC_CAP_8_BIT_DATA) { +				omap_mux_init_signal("sdmmc1_dat4", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc1_dat5", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc1_dat6", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc1_dat7", +					OMAP_PIN_INPUT_PULLUP); +			}  		} - -		mmc = kzalloc(sizeof(struct omap_mmc_platform_data), -			      GFP_KERNEL); -		if (!mmc) { -			pr_err("Cannot allocate memory for mmc device!\n"); -			goto done; +		if (controller_nr == 1) { +			/* MMC2 */ +			omap_mux_init_signal("sdmmc2_clk", +				OMAP_PIN_INPUT_PULLUP); +			omap_mux_init_signal("sdmmc2_cmd", +				OMAP_PIN_INPUT_PULLUP); +			omap_mux_init_signal("sdmmc2_dat0", +				OMAP_PIN_INPUT_PULLUP); + +			/* +			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 +			 * need to be muxed in the board-*.c files +			 */ +			if (mmc_controller->slots[0].caps & +				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { +				omap_mux_init_signal("sdmmc2_dat1", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc2_dat2", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc2_dat3", +					OMAP_PIN_INPUT_PULLUP); +			} +			if (mmc_controller->slots[0].caps & +							MMC_CAP_8_BIT_DATA) { +				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", +					OMAP_PIN_INPUT_PULLUP); +				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", +					OMAP_PIN_INPUT_PULLUP); +			}  		} -		if (c->name) -			strncpy(hc->name, c->name, HSMMC_NAME_LEN); -		else -			snprintf(hc->name, ARRAY_SIZE(hc->name), -				"mmc%islot%i", c->mmc, 1); -		mmc->slots[0].name = hc->name; -		mmc->nr_slots = 1; -		mmc->slots[0].caps = c->caps; -		mmc->slots[0].internal_clock = !c->ext_clock; -		mmc->dma_mask = 0xffffffff; -		if (cpu_is_omap44xx()) -			mmc->reg_offset = OMAP4_MMC_REG_OFFSET; -		else -			mmc->reg_offset = 0; +		/* +		 * For MMC3 the pins need to be muxed in the board-*.c files +		 */ +	} +} -		mmc->get_context_loss_count = hsmmc_get_context_loss; +static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, +					struct omap_mmc_platform_data *mmc) +{ +	char *hc_name; -		mmc->slots[0].switch_pin = c->gpio_cd; -		mmc->slots[0].gpio_wp = c->gpio_wp; +	hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL); +	if (!hc_name) { +		pr_err("Cannot allocate memory for controller slot name\n"); +		kfree(hc_name); +		return -ENOMEM; +	} -		mmc->slots[0].remux = c->remux; -		mmc->slots[0].init_card = c->init_card; +	if (c->name) +		strncpy(hc_name, c->name, HSMMC_NAME_LEN); +	else +		snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", +								c->mmc, 1); +	mmc->slots[0].name = hc_name; +	mmc->nr_slots = 1; +	mmc->slots[0].caps = c->caps; +	mmc->slots[0].internal_clock = !c->ext_clock; +	mmc->dma_mask = 0xffffffff; +	if (cpu_is_omap44xx()) +		mmc->reg_offset = OMAP4_MMC_REG_OFFSET; +	else +		mmc->reg_offset = 0; -		if (c->cover_only) -			mmc->slots[0].cover = 1; +	mmc->get_context_loss_count = hsmmc_get_context_loss; -		if (c->nonremovable) -			mmc->slots[0].nonremovable = 1; +	mmc->slots[0].switch_pin = c->gpio_cd; +	mmc->slots[0].gpio_wp = c->gpio_wp; -		if (c->power_saving) -			mmc->slots[0].power_saving = 1; +	mmc->slots[0].remux = c->remux; +	mmc->slots[0].init_card = c->init_card; -		if (c->no_off) -			mmc->slots[0].no_off = 1; +	if (c->cover_only) +		mmc->slots[0].cover = 1; -		if (c->vcc_aux_disable_is_sleep) -			mmc->slots[0].vcc_aux_disable_is_sleep = 1; +	if (c->nonremovable) +		mmc->slots[0].nonremovable = 1; -		/* NOTE:  MMC slots should have a Vcc regulator set up. -		 * This may be from a TWL4030-family chip, another -		 * controllable regulator, or a fixed supply. -		 * -		 * temporary HACK: ocr_mask instead of fixed supply -		 */ -		mmc->slots[0].ocr_mask = c->ocr_mask; +	if (c->power_saving) +		mmc->slots[0].power_saving = 1; -		if (cpu_is_omap3517() || cpu_is_omap3505()) -			mmc->slots[0].set_power = nop_mmc_set_power; -		else -			mmc->slots[0].features |= HSMMC_HAS_PBIAS; +	if (c->no_off) +		mmc->slots[0].no_off = 1; -		if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) -			mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; +	if (c->vcc_aux_disable_is_sleep) +		mmc->slots[0].vcc_aux_disable_is_sleep = 1; -		switch (c->mmc) { -		case 1: -			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { -				/* on-chip level shifting via PBIAS0/PBIAS1 */ -				if (cpu_is_omap44xx()) { -					mmc->slots[0].before_set_reg = +	/* +	 * NOTE:  MMC slots should have a Vcc regulator set up. +	 * This may be from a TWL4030-family chip, another +	 * controllable regulator, or a fixed supply. +	 * +	 * temporary HACK: ocr_mask instead of fixed supply +	 */ +	mmc->slots[0].ocr_mask = c->ocr_mask; + +	if (cpu_is_omap3517() || cpu_is_omap3505()) +		mmc->slots[0].set_power = nop_mmc_set_power; +	else +		mmc->slots[0].features |= HSMMC_HAS_PBIAS; + +	if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) +		mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + +	switch (c->mmc) { +	case 1: +		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { +			/* on-chip level shifting via PBIAS0/PBIAS1 */ +			if (cpu_is_omap44xx()) { +				mmc->slots[0].before_set_reg =  						omap4_hsmmc1_before_set_reg; -					mmc->slots[0].after_set_reg = +				mmc->slots[0].after_set_reg =  						omap4_hsmmc1_after_set_reg; -				} else { -					mmc->slots[0].before_set_reg = +			} else { +				mmc->slots[0].before_set_reg =  						omap_hsmmc1_before_set_reg; -					mmc->slots[0].after_set_reg = +				mmc->slots[0].after_set_reg =  						omap_hsmmc1_after_set_reg; -				}  			} +		} -			/* Omap3630 HSMMC1 supports only 4-bit */ -			if (cpu_is_omap3630() && -					(c->caps & MMC_CAP_8_BIT_DATA)) { -				c->caps &= ~MMC_CAP_8_BIT_DATA; -				c->caps |= MMC_CAP_4_BIT_DATA; -				mmc->slots[0].caps = c->caps; -			} -			break; -		case 2: -			if (c->ext_clock) -				c->transceiver = 1; -			if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { -				c->caps &= ~MMC_CAP_8_BIT_DATA; -				c->caps |= MMC_CAP_4_BIT_DATA; -			} -			/* FALLTHROUGH */ -		case 3: -			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { -				/* off-chip level shifting, or none */ -				mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; -				mmc->slots[0].after_set_reg = NULL; -			} -			break; -		default: -			pr_err("MMC%d configuration not supported!\n", c->mmc); -			kfree(mmc); -			continue; +		/* OMAP3630 HSMMC1 supports only 4-bit */ +		if (cpu_is_omap3630() && +				(c->caps & MMC_CAP_8_BIT_DATA)) { +			c->caps &= ~MMC_CAP_8_BIT_DATA; +			c->caps |= MMC_CAP_4_BIT_DATA; +			mmc->slots[0].caps = c->caps; +		} +		break; +	case 2: +		if (c->ext_clock) +			c->transceiver = 1; +		if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { +			c->caps &= ~MMC_CAP_8_BIT_DATA; +			c->caps |= MMC_CAP_4_BIT_DATA;  		} -		hsmmc_data[c->mmc - 1] = mmc; +		/* FALLTHROUGH */ +	case 3: +		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { +			/* off-chip level shifting, or none */ +			mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; +			mmc->slots[0].after_set_reg = NULL; +		} +		break; +	case 4: +	case 5: +		mmc->slots[0].before_set_reg = NULL; +		mmc->slots[0].after_set_reg = NULL; +		break; +	default: +		pr_err("MMC%d configuration not supported!\n", c->mmc); +		kfree(hc_name); +		return -ENODEV; +	} +	return 0; +} + +static struct omap_device_pm_latency omap_hsmmc_latency[] = { +	[0] = { +		.deactivate_func = omap_device_idle_hwmods, +		.activate_func	 = omap_device_enable_hwmods, +		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST, +	}, +	/* +	 * XXX There should also be an entry here to power off/on the +	 * MMC regulators/PBIAS cells, etc. +	 */ +}; + +#define MAX_OMAP_MMC_HWMOD_NAME_LEN		16 + +void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +{ +	struct omap_hwmod *oh; +	struct omap_device *od; +	struct omap_device_pm_latency *ohl; +	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; +	struct omap_mmc_platform_data *mmc_data; +	struct omap_mmc_dev_attr *mmc_dev_attr; +	char *name; +	int l; +	int ohl_cnt = 0; + +	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); +	if (!mmc_data) { +		pr_err("Cannot allocate memory for mmc device!\n"); +		goto done;  	} -	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); +	if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) { +		pr_err("%s fails!\n", __func__); +		goto done; +	} +	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); + +	name = "omap_hsmmc"; +	ohl = omap_hsmmc_latency; +	ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency); + +	l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, +		     "mmc%d", ctrl_nr); +	WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN, +	     "String buffer overflow in MMC%d device setup\n", ctrl_nr); +	oh = omap_hwmod_lookup(oh_name); +	if (!oh) { +		pr_err("Could not look up %s\n", oh_name); +		kfree(mmc_data->slots[0].name); +		goto done; +	} -	/* pass the device nodes back to board setup code */ -	for (c = controllers; c->mmc; c++) { -		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; +	if (oh->dev_attr != NULL) { +		mmc_dev_attr = oh->dev_attr; +		mmc_data->controller_flags = mmc_dev_attr->flags; +	} -		if (!c->mmc || c->mmc > nr_hsmmc) -			continue; -		c->dev = mmc->dev; +	od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, +		sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); +	if (IS_ERR(od)) { +		WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); +		kfree(mmc_data->slots[0].name); +		goto done;  	} +	/* +	 * return device handle to board setup code +	 * required to populate for regulator framework structure +	 */ +	hsmmcinfo->dev = &od->pdev.dev;  done: -	for (i = 0; i < nr_hsmmc; i++) -		kfree(hsmmc_data[i]); +	kfree(mmc_data); +} + +void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +{ +	u32 reg; + +	if (!cpu_is_omap44xx()) { +		if (cpu_is_omap2430()) { +			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; +			control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; +		} else { +			control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; +			control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; +		} +	} else { +		control_pbias_offset = +			OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; +		control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; +		reg = omap4_ctrl_pad_readl(control_mmc1); +		reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | +			OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); +		reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | +			OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); +		reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| +			OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | +			OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); +		omap4_ctrl_pad_writel(reg, control_mmc1); +	} + +	for (; controllers->mmc; controllers++) +		omap_init_hsmmc(controllers, controllers->mmc); +  }  #endif |