diff options
Diffstat (limited to 'arch/arm/include')
| -rw-r--r-- | arch/arm/include/asm/archrandom.h | 10 | ||||
| -rw-r--r-- | arch/arm/include/asm/assembler.h | 17 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/locomo.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/sa1111.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/kexec-internal.h | 12 | ||||
| -rw-r--r-- | arch/arm/include/debug/brcmstb.S | 30 | ||||
| -rw-r--r-- | arch/arm/include/debug/efm32.S | 45 | ||||
| -rw-r--r-- | arch/arm/include/debug/sirf.S | 40 | ||||
| -rw-r--r-- | arch/arm/include/debug/sti.S | 26 | ||||
| -rw-r--r-- | arch/arm/include/debug/tegra.S | 54 |
10 files changed, 86 insertions, 152 deletions
diff --git a/arch/arm/include/asm/archrandom.h b/arch/arm/include/asm/archrandom.h new file mode 100644 index 000000000000..a8e84ca5c2ee --- /dev/null +++ b/arch/arm/include/asm/archrandom.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ARCHRANDOM_H +#define _ASM_ARCHRANDOM_H + +static inline bool __init smccc_probe_trng(void) +{ + return false; +} + +#endif /* _ASM_ARCHRANDOM_H */ diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6ed30421f697..e2b1fd558bf3 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -578,4 +578,21 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) __adldst_l str, \src, \sym, \tmp, \cond .endm + /* + * rev_l - byte-swap a 32-bit value + * + * @val: source/destination register + * @tmp: scratch register + */ + .macro rev_l, val:req, tmp:req + .if __LINUX_ARM_ARCH__ < 6 + eor \tmp, \val, \val, ror #16 + bic \tmp, \tmp, #0x00ff0000 + mov \val, \val, ror #8 + eor \val, \val, \tmp, lsr #8 + .else + rev \val, \val + .endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h index f8712e3c29cf..246a3de25931 100644 --- a/arch/arm/include/asm/hardware/locomo.h +++ b/arch/arm/include/asm/hardware/locomo.h @@ -188,7 +188,7 @@ struct locomo_driver { struct device_driver drv; unsigned int devid; int (*probe)(struct locomo_dev *); - int (*remove)(struct locomo_dev *); + void (*remove)(struct locomo_dev *); }; #define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index d134b9a5ff94..2e70db6f22ea 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -403,7 +403,7 @@ struct sa1111_driver { struct device_driver drv; unsigned int devid; int (*probe)(struct sa1111_dev *); - int (*remove)(struct sa1111_dev *); + void (*remove)(struct sa1111_dev *); }; #define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) diff --git a/arch/arm/include/asm/kexec-internal.h b/arch/arm/include/asm/kexec-internal.h new file mode 100644 index 000000000000..ecc2322db7aa --- /dev/null +++ b/arch/arm/include/asm/kexec-internal.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARM_KEXEC_INTERNAL_H +#define _ARM_KEXEC_INTERNAL_H + +struct kexec_relocate_data { + unsigned long kexec_start_address; + unsigned long kexec_indirection_page; + unsigned long kexec_mach_type; + unsigned long kexec_r2; +}; + +#endif diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S index 0ff32ffc610c..f684e3a815f6 100644 --- a/arch/arm/include/debug/brcmstb.S +++ b/arch/arm/include/debug/brcmstb.S @@ -25,6 +25,7 @@ #define SUN_TOP_CTRL_BASE_V7 REG_PHYS_ADDR_V7(0x404000) #define UARTA_3390 REG_PHYS_ADDR(0x40a900) +#define UARTA_72116 UARTA_7255 #define UARTA_7250 REG_PHYS_ADDR(0x40b400) #define UARTA_7255 REG_PHYS_ADDR(0x40c000) #define UARTA_7260 UARTA_7255 @@ -85,20 +86,21 @@ ARM_BE8( rev \rv, \rv ) /* Chip specific detection starts here */ 20: checkuart(\rp, \rv, 0x33900000, 3390) -21: checkuart(\rp, \rv, 0x72160000, 7216) -22: checkuart(\rp, \rv, 0x07216400, 72164) -23: checkuart(\rp, \rv, 0x07216500, 72165) -24: checkuart(\rp, \rv, 0x72500000, 7250) -25: checkuart(\rp, \rv, 0x72550000, 7255) -26: checkuart(\rp, \rv, 0x72600000, 7260) -27: checkuart(\rp, \rv, 0x72680000, 7268) -28: checkuart(\rp, \rv, 0x72710000, 7271) -29: checkuart(\rp, \rv, 0x72780000, 7278) -30: checkuart(\rp, \rv, 0x73640000, 7364) -31: checkuart(\rp, \rv, 0x73660000, 7366) -32: checkuart(\rp, \rv, 0x07437100, 74371) -33: checkuart(\rp, \rv, 0x74390000, 7439) -34: checkuart(\rp, \rv, 0x74450000, 7445) +21: checkuart(\rp, \rv, 0x07211600, 72116) +22: checkuart(\rp, \rv, 0x72160000, 7216) +23: checkuart(\rp, \rv, 0x07216400, 72164) +24: checkuart(\rp, \rv, 0x07216500, 72165) +25: checkuart(\rp, \rv, 0x72500000, 7250) +26: checkuart(\rp, \rv, 0x72550000, 7255) +27: checkuart(\rp, \rv, 0x72600000, 7260) +28: checkuart(\rp, \rv, 0x72680000, 7268) +29: checkuart(\rp, \rv, 0x72710000, 7271) +30: checkuart(\rp, \rv, 0x72780000, 7278) +31: checkuart(\rp, \rv, 0x73640000, 7364) +32: checkuart(\rp, \rv, 0x73660000, 7366) +33: checkuart(\rp, \rv, 0x07437100, 74371) +34: checkuart(\rp, \rv, 0x74390000, 7439) +35: checkuart(\rp, \rv, 0x74450000, 7445) /* No valid UART found */ 90: mov \rp, #0 diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S deleted file mode 100644 index b0083d6e31e8..000000000000 --- a/arch/arm/include/debug/efm32.S +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2013 Pengutronix - * Uwe Kleine-Koenig <[email protected]> - */ - -#define UARTn_CMD 0x000c -#define UARTn_CMD_TXEN 0x0004 - -#define UARTn_STATUS 0x0010 -#define UARTn_STATUS_TXC 0x0020 -#define UARTn_STATUS_TXBL 0x0040 - -#define UARTn_TXDATA 0x0034 - - .macro addruart, rx, tmp, tmp2 - ldr \rx, =(CONFIG_DEBUG_UART_PHYS) - - /* - * enable TX. The driver might disable it to save energy. We - * don't care about disabling at the end as during debug power - * consumption isn't that important. - */ - ldr \tmp, =(UARTn_CMD_TXEN) - str \tmp, [\rx, #UARTn_CMD] - .endm - - .macro senduart,rd,rx - strb \rd, [\rx, #UARTn_TXDATA] - .endm - - .macro waituartcts,rd,rx - .endm - - .macro waituarttxrdy,rd,rx -1001: ldr \rd, [\rx, #UARTn_STATUS] - tst \rd, #UARTn_STATUS_TXBL - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, UARTn_STATUS] - tst \rd, #UARTn_STATUS_TXC - bne 1001b - .endm diff --git a/arch/arm/include/debug/sirf.S b/arch/arm/include/debug/sirf.S deleted file mode 100644 index 3612c7b9cbe7..000000000000 --- a/arch/arm/include/debug/sirf.S +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-prima2/include/mach/debug-macro.S - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#define SIRF_LLUART_TXFIFO_STATUS 0x0114 -#define SIRF_LLUART_TXFIFO_DATA 0x0118 - -#define SIRF_LLUART_TXFIFO_FULL (1 << 5) - -#ifdef CONFIG_DEBUG_SIRFATLAS7_UART0 -#define SIRF_LLUART_TXFIFO_EMPTY (1 << 8) -#else -#define SIRF_LLUART_TXFIFO_EMPTY (1 << 6) -#endif - - - .macro addruart, rp, rv, tmp - ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical - ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #SIRF_LLUART_TXFIFO_DATA] - .endm - - .macro busyuart,rd,rx - .endm - - .macro waituartcts,rd,rx - .endm - - .macro waituarttxrdy,rd,rx -1001: ldr \rd, [\rx, #SIRF_LLUART_TXFIFO_STATUS] - tst \rd, #SIRF_LLUART_TXFIFO_EMPTY - beq 1001b - .endm - diff --git a/arch/arm/include/debug/sti.S b/arch/arm/include/debug/sti.S index 72d052511890..dc796ac2ac57 100644 --- a/arch/arm/include/debug/sti.S +++ b/arch/arm/include/debug/sti.S @@ -6,28 +6,6 @@ * Copyright (C) 2013 STMicroelectronics (R&D) Limited. */ -#define STIH41X_COMMS_BASE 0xfed00000 -#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000) - -#define STIH41X_SBC_LPM_BASE 0xfe400000 -#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000) -#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000) - - -#define VIRT_ADDRESS(x) (x - 0x1000000) - -#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2) -#define DEBUG_LL_UART_BASE STIH41X_ASC2_BASE -#endif - -#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1) -#define DEBUG_LL_UART_BASE STIH41X_SBC_ASC1_BASE -#endif - -#ifndef DEBUG_LL_UART_BASE -#error "DEBUG UART is not Configured" -#endif - #define ASC_TX_BUF_OFF 0x04 #define ASC_CTRL_OFF 0x0c #define ASC_STA_OFF 0x14 @@ -37,8 +15,8 @@ .macro addruart, rp, rv, tmp - ldr \rp, =DEBUG_LL_UART_BASE @ physical base - ldr \rv, =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base + ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical base + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virt base .endm .macro senduart,rd,rx diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S index 98daa7f48314..7454480d084b 100644 --- a/arch/arm/include/debug/tegra.S +++ b/arch/arm/include/debug/tegra.S @@ -149,7 +149,34 @@ .align 99: .word . +#if defined(ZIMAGE) + .word . + 4 +/* + * Storage for the state maintained by the macro. + * + * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. + * That's because this header is included from multiple files, and we only + * want a single copy of the data. In particular, the UART probing code above + * assumes it's running using physical addresses. This is true when this file + * is included from head.o, but not when included from debug.o. So we need + * to share the probe results between the two copies, rather than having + * to re-run the probing again later. + * + * In the decompressor, we put the storage right here, since common.c + * isn't included in the decompressor build. This storage data gets put in + * .text even though it's really data, since .data is discarded from the + * decompressor. Luckily, .text is writeable in the decompressor, unless + * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. + */ + /* Debug UART initialization required */ + .word 1 + /* Debug UART physical address */ + .word 0 + /* Debug UART virtual address */ + .word 0 +#else .word tegra_uart_config +#endif .ltorg /* Load previously selected UART address */ @@ -189,30 +216,3 @@ .macro waituarttxrdy,rd,rx .endm - -/* - * Storage for the state maintained by the macros above. - * - * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. - * That's because this header is included from multiple files, and we only - * want a single copy of the data. In particular, the UART probing code above - * assumes it's running using physical addresses. This is true when this file - * is included from head.o, but not when included from debug.o. So we need - * to share the probe results between the two copies, rather than having - * to re-run the probing again later. - * - * In the decompressor, we put the symbol/storage right here, since common.c - * isn't included in the decompressor build. This symbol gets put in .text - * even though it's really data, since .data is discarded from the - * decompressor. Luckily, .text is writeable in the decompressor, unless - * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. - */ -#if defined(ZIMAGE) -tegra_uart_config: - /* Debug UART initialization required */ - .word 1 - /* Debug UART physical address */ - .word 0 - /* Debug UART virtual address */ - .word 0 -#endif |