diff options
Diffstat (limited to 'arch/arm/boot/dts/st/stm32mp151c-mect1s.dts')
| -rw-r--r-- | arch/arm/boot/dts/st/stm32mp151c-mect1s.dts | 290 |
1 files changed, 290 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts new file mode 100644 index 000000000000..a1b8c3646e98 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic MECT1S"; + compatible = "prt,mect1s", "st,stm32mp151"; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = ðernet0; + ethernet1 = ðernet1; + ethernet2 = ðernet2; + ethernet3 = ðernet3; + ethernet4 = ðernet4; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v: regulator-v5v { + compatible = "regulator-fixed"; + regulator-name = "v5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <24000000>; +}; + +&clk_lse { + status = "disabled"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + st,eth-clk-sel; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + +&{ethernet0_rmii_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ +}; + +&{ethernet0_rmii_pins_a/pins2} { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ +}; + +&{ethernet0_rmii_sleep_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ +}; + +&mdio0 { + /* All this DP83TG720R PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TG720R */ + t1_phy0: ethernet-phy@8 { + compatible = "ethernet-phy-id2000.a284"; + reg = <8>; + interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy1: ethernet-phy@c { + compatible = "ethernet-phy-id2000.a284"; + reg = <12>; + interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy2: ethernet-phy@4 { + compatible = "ethernet-phy-id2000.a284"; + reg = <4>; + interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy3: ethernet-phy@d { + compatible = "ethernet-phy-id2000.a284"; + reg = <13>; + interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&{qspi_bk1_pins_a/pins} { + /delete-property/ bias-disable; + bias-pull-up; + drive-push-pull; + slew-rate = <1>; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet1: port@0 { + reg = <0>; + label = "t10"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy0>; + }; + + ethernet2: port@1 { + reg = <1>; + label = "t11"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy1>; + }; + + ethernet3: port@2 { + reg = <2>; + label = "t12"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy2>; + }; + + ethernet4: port@3 { + reg = <3>; + label = "t13"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy3>; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + /* RGMII mode is not working properly, using RMII instead. */ + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + vbus-supply = <&v5v>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&v3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&v3v3>; +}; |