diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-apq8064.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 39 |
1 files changed, 19 insertions, 20 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 769e151747c3..ac7494ed633e 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -302,7 +302,7 @@ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&ps_hold>; + pinctrl-0 = <&ps_hold_default_state>; }; sfpb_wrapper_mutex: syscon@1200000 { @@ -435,8 +435,8 @@ gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-0 = <&i2c1_default_state>; + pinctrl-1 = <&i2c1_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -465,8 +465,8 @@ gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_pins_sleep>; + pinctrl-0 = <&i2c2_default_state>; + pinctrl-1 = <&i2c2_sleep_state>; pinctrl-names = "default", "sleep"; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; @@ -489,8 +489,8 @@ ranges; gsbi3_i2c: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-1 = <&i2c3_pins_sleep>; + pinctrl-0 = <&i2c3_default_state>; + pinctrl-1 = <&i2c3_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; @@ -528,8 +528,8 @@ gsbi4_i2c: i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c4_pins>; - pinctrl-1 = <&i2c4_pins_sleep>; + pinctrl-0 = <&i2c4_default_state>; + pinctrl-1 = <&i2c4_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16380000 0x1000>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; @@ -565,8 +565,8 @@ compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-0 = <&spi5_default>; - pinctrl-1 = <&spi5_sleep>; + pinctrl-0 = <&spi5_default_state>; + pinctrl-1 = <&spi5_sleep_state>; pinctrl-names = "default", "sleep"; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -599,8 +599,8 @@ gsbi6_i2c: i2c@16580000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c6_pins>; - pinctrl-1 = <&i2c6_pins_sleep>; + pinctrl-0 = <&i2c6_default_state>; + pinctrl-1 = <&i2c6_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16580000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; @@ -635,8 +635,8 @@ gsbi7_i2c: i2c@16680000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c7_pins>; - pinctrl-1 = <&i2c7_pins_sleep>; + pinctrl-0 = <&i2c7_default_state>; + pinctrl-1 = <&i2c7_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16680000 0x1000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -871,7 +871,6 @@ compatible = "qcom,apq8064-sata-phy"; status = "disabled"; reg = <0x1b400000 0x200>; - reg-names = "phy_mem"; clocks = <&gcc SATA_PHY_CFG_CLK>; clock-names = "cfg"; #phy-cells = <0>; @@ -890,9 +889,9 @@ <&gcc SATA_PMALIVE_CLK>; clock-names = "slave_iface", "iface", - "bus", + "core", "rxoob", - "core_pmalive"; + "pmalive"; assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; @@ -945,7 +944,7 @@ dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; - pinctrl-0 = <&sdc4_gpios>; + pinctrl-0 = <&sdc4_default_state>; }; sdcc4bam: dma-controller@121c2000 { @@ -962,7 +961,7 @@ status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pins>; + pinctrl-0 = <&sdcc1_default_state>; arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |