diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi | 58 |
1 files changed, 37 insertions, 21 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi index 85aeebc9485d..99b5e78458aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi @@ -61,6 +61,18 @@ vin-supply = <®_smarc_suppy>; }; + reg_sdio: regulator-sdio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sdio>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + }; + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -137,7 +149,7 @@ status = "disabled"; }; - i2c_intern: i2c-gpio-intern { + i2c_intern: i2c-0 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_intern>; @@ -148,7 +160,7 @@ #size-cells = <0>; }; - i2c_lcd: i2c-gpio-lcd { + i2c_lcd: i2c-1 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_lcd>; @@ -160,7 +172,7 @@ status = "disabled"; }; - i2c_cam: i2c-gpio-cam { + i2c_cam: i2c-2 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_cam>; @@ -178,7 +190,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - audmux_ssi1 { + mux-ssi1 { fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) | @@ -190,7 +202,7 @@ >; }; - audmux_adu3 { + mux-aud3 { fsl,audmux-port = <MX51_AUDMUX_PORT3>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -198,7 +210,7 @@ >; }; - audmux_ssi2 { + mux-ssi2 { fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | @@ -210,7 +222,7 @@ >; }; - audmux_adu4 { + mux-aud4 { fsl,audmux-port = <MX51_AUDMUX_PORT4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -244,7 +256,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, - <&gpio3 29 GPIO_ACTIVE_LOW>; + <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ @@ -259,7 +272,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-connection-type = "rgmii-id"; phy-handle = <ðphy>; mdio { @@ -269,7 +282,7 @@ ethphy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; }; }; @@ -356,10 +369,6 @@ regulator-always-on; }; - /* - * Per schematics, of all VGEN's, only VGEN5 has some - * usage ... but even that - over DNI resistor - */ vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; @@ -380,8 +389,7 @@ regulator-max-microvolt = <3300000>; }; - reg_2p5v_s0: vgen5 { - regulator-name = "V_2V5_S0"; + vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; @@ -464,6 +472,8 @@ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 >; }; @@ -516,7 +526,7 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 /* RST_GBE0_PHY# */ >; }; @@ -642,6 +652,12 @@ >; }; + pinctrl_reg_sdio: reg-sdiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 @@ -694,7 +710,6 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ >; }; @@ -728,8 +743,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; }; /* LCD_BKLT_PWM */ @@ -797,12 +811,12 @@ pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sdio>; no-1-8-v; }; /* SDMMC */ &usdhc4 { - /* Internal eMMC, optional on some boards */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; @@ -811,11 +825,13 @@ non-removable; vmmc-supply = <®_3p3v_s0>; vqmmc-supply = <®_1p8v_s0>; + status = "okay"; }; &wdog1 { /* CPLD is feeded by watchdog (hardwired) */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; status = "okay"; }; |