diff options
Diffstat (limited to 'Documentation')
59 files changed, 3218 insertions, 1212 deletions
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers b/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers index 45985e411f13..721a05b90109 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers +++ b/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers @@ -10,7 +10,7 @@ Description: A collection of all the memory tiers allocated. What: /sys/devices/virtual/memory_tiering/memory_tierN/ - /sys/devices/virtual/memory_tiering/memory_tierN/nodes + /sys/devices/virtual/memory_tiering/memory_tierN/nodelist Date: August 2022 Contact: Linux memory management mailing list <linux-mm@kvack.org> Description: Directory with details of a specific memory tier @@ -21,5 +21,5 @@ Description: Directory with details of a specific memory tier A smaller value of N implies a higher (faster) memory tier in the hierarchy. - nodes: NUMA nodes that are part of this memory tier. + nodelist: NUMA nodes that are part of this memory tier. diff --git a/Documentation/accel/index.rst b/Documentation/accel/index.rst new file mode 100644 index 000000000000..2b43c9a7f67b --- /dev/null +++ b/Documentation/accel/index.rst @@ -0,0 +1,17 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Compute Accelerators +==================== + +.. toctree:: + :maxdepth: 1 + + introduction + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/accel/introduction.rst b/Documentation/accel/introduction.rst new file mode 100644 index 000000000000..6f31af14b1fc --- /dev/null +++ b/Documentation/accel/introduction.rst @@ -0,0 +1,110 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Introduction +============ + +The Linux compute accelerators subsystem is designed to expose compute +accelerators in a common way to user-space and provide a common set of +functionality. + +These devices can be either stand-alone ASICs or IP blocks inside an SoC/GPU. +Although these devices are typically designed to accelerate +Machine-Learning (ML) and/or Deep-Learning (DL) computations, the accel layer +is not limited to handling these types of accelerators. + +Typically, a compute accelerator will belong to one of the following +categories: + +- Edge AI - doing inference at an edge device. It can be an embedded ASIC/FPGA, + or an IP inside a SoC (e.g. laptop web camera). These devices + are typically configured using registers and can work with or without DMA. + +- Inference data-center - single/multi user devices in a large server. This + type of device can be stand-alone or an IP inside a SoC or a GPU. It will + have on-board DRAM (to hold the DL topology), DMA engines and + command submission queues (either kernel or user-space queues). + It might also have an MMU to manage multiple users and might also enable + virtualization (SR-IOV) to support multiple VMs on the same device. In + addition, these devices will usually have some tools, such as profiler and + debugger. + +- Training data-center - Similar to Inference data-center cards, but typically + have more computational power and memory b/w (e.g. HBM) and will likely have + a method of scaling-up/out, i.e. connecting to other training cards inside + the server or in other servers, respectively. + +All these devices typically have different runtime user-space software stacks, +that are tailored-made to their h/w. In addition, they will also probably +include a compiler to generate programs to their custom-made computational +engines. Typically, the common layer in user-space will be the DL frameworks, +such as PyTorch and TensorFlow. + +Sharing code with DRM +===================== + +Because this type of devices can be an IP inside GPUs or have similar +characteristics as those of GPUs, the accel subsystem will use the +DRM subsystem's code and functionality. i.e. the accel core code will +be part of the DRM subsystem and an accel device will be a new type of DRM +device. + +This will allow us to leverage the extensive DRM code-base and +collaborate with DRM developers that have experience with this type of +devices. In addition, new features that will be added for the accelerator +drivers can be of use to GPU drivers as well. + +Differentiation from GPUs +========================= + +Because we want to prevent the extensive user-space graphic software stack +from trying to use an accelerator as a GPU, the compute accelerators will be +differentiated from GPUs by using a new major number and new device char files. + +Furthermore, the drivers will be located in a separate place in the kernel +tree - drivers/accel/. + +The accelerator devices will be exposed to the user space with the dedicated +261 major number and will have the following convention: + +- device char files - /dev/accel/accel* +- sysfs - /sys/class/accel/accel*/ +- debugfs - /sys/kernel/debug/accel/accel*/ + +Getting Started +=============== + +First, read the DRM documentation at Documentation/gpu/index.rst. +Not only it will explain how to write a new DRM driver but it will also +contain all the information on how to contribute, the Code Of Conduct and +what is the coding style/documentation. All of that is the same for the +accel subsystem. + +Second, make sure the kernel is configured with CONFIG_DRM_ACCEL. + +To expose your device as an accelerator, two changes are needed to +be done in your driver (as opposed to a standard DRM driver): + +- Add the DRIVER_COMPUTE_ACCEL feature flag in your drm_driver's + driver_features field. It is important to note that this driver feature is + mutually exclusive with DRIVER_RENDER and DRIVER_MODESET. Devices that want + to expose both graphics and compute device char files should be handled by + two drivers that are connected using the auxiliary bus framework. + +- Change the open callback in your driver fops structure to accel_open(). + Alternatively, your driver can use DEFINE_DRM_ACCEL_FOPS macro to easily + set the correct function operations pointers structure. + +External References +=================== + +email threads +------------- + +* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022) +* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022) + +Conference talks +---------------- + +* `LPC 2022 Accelerators BOF outcomes summary <https://airlied.blogspot.com/2022/09/accelerators-bof-outcomes-summary.html>`_ - Dave Airlie (2022) diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index 9764d6edb189..06c525e01ea5 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -3080,6 +3080,11 @@ ... 255 = /dev/osd255 256th OSD Device + 261 char Compute Acceleration Devices + 0 = /dev/accel/accel0 First acceleration device + 1 = /dev/accel/accel1 Second acceleration device + ... + 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT Character devices that request a dynamic allocation of major number will take numbers starting from 511 and downward, diff --git a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst index 4f680dc9661c..abd90ed31090 100644 --- a/Documentation/admin-guide/media/vivid.rst +++ b/Documentation/admin-guide/media/vivid.rst @@ -1318,7 +1318,7 @@ instance. This setup would require the following commands: $ v4l2-ctl -d2 -i2 $ v4l2-ctl -d2 -c horizontal_movement=4 $ v4l2-ctl -d1 --overlay=1 - $ v4l2-ctl -d1 -c loop_video=1 + $ v4l2-ctl -d0 -c loop_video=1 $ v4l2-ctl -d2 --stream-mmap --overlay=1 And from another console: diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst index 8aefa1001ae5..8c324ad638de 100644 --- a/Documentation/arm64/booting.rst +++ b/Documentation/arm64/booting.rst @@ -340,6 +340,14 @@ Before jumping into the kernel, the following conditions must be met: - SMCR_EL2.LEN must be initialised to the same value for all CPUs the kernel will execute on. + - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01. + + - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01. + + - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01. + + - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01. + For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64) - If EL3 is present: diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst index 04ba83e1965f..c7adc7897df6 100644 --- a/Documentation/arm64/cpu-feature-registers.rst +++ b/Documentation/arm64/cpu-feature-registers.rst @@ -92,7 +92,7 @@ operation if the source belongs to the supported system register space. The infrastructure emulates only the following system register space:: - Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7 + Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7 (See Table C5-6 'System instruction encodings for non-Debug System register accesses' in ARMv8 ARM DDI 0487A.h, for the list of @@ -293,6 +293,42 @@ infrastructure: | WFXT | [3-0] | y | +------------------------------+---------+---------+ + 10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0 + + +------------------------------+---------+---------+ + | Name | bits | visible | + +------------------------------+---------+---------+ + | FPDP | [11-8] | y | + +------------------------------+---------+---------+ + + 11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1 + + +------------------------------+---------+---------+ + | Name | bits | visible | + +------------------------------+---------+---------+ + | SIMDFMAC | [31-28] | y | + +------------------------------+---------+---------+ + | SIMDSP | [19-16] | y | + +------------------------------+---------+---------+ + | SIMDInt | [15-12] | y | + +------------------------------+---------+---------+ + | SIMDLS | [11-8] | y | + +------------------------------+---------+---------+ + + 12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5 + + +------------------------------+---------+---------+ + | Name | bits | visible | + +------------------------------+---------+---------+ + | CRC32 | [19-16] | y | + +------------------------------+---------+---------+ + | SHA2 | [15-12] | y | + +------------------------------+---------+---------+ + | SHA1 | [11-8] | y | + +------------------------------+---------+---------+ + | AES | [7-4] | y | + +------------------------------+---------+---------+ + Appendix I: Example ------------------- diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 0793c400d4b0..06f4ab122697 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -118,6 +118,12 @@ Text Searching CRC and Math Functions in Linux =============================== +Arithmetic Overflow Checking +---------------------------- + +.. kernel-doc:: include/linux/overflow.h + :internal: + CRC Functions ------------- diff --git a/Documentation/dev-tools/kmsan.rst b/Documentation/dev-tools/kmsan.rst index 2a53a801198c..55fa82212eb2 100644 --- a/Documentation/dev-tools/kmsan.rst +++ b/Documentation/dev-tools/kmsan.rst @@ -67,6 +67,7 @@ uninitialized in the local variable, as well as the stack where the value was copied to another memory location before use. A use of uninitialized value ``v`` is reported by KMSAN in the following cases: + - in a condition, e.g. ``if (v) { ... }``; - in an indexing or pointer dereferencing, e.g. ``array[v]`` or ``*v``; - when it is copied to userspace or hardware, e.g. ``copy_to_user(..., &v, ...)``; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 5bb23e97cf33..d976380801e3 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -23,6 +23,7 @@ properties: - mediatek,mt8173-dpi - mediatek,mt8183-dpi - mediatek,mt8186-dpi + - mediatek,mt8188-dp-intf - mediatek,mt8192-dpi - mediatek,mt8195-dp-intf diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml new file mode 100644 index 000000000000..8ffbc30c6b7f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -0,0 +1,52 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU common properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: | + Common properties for QCom DPU display controller. + +properties: + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + + patternProperties: + "^port@[0-9a-f]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml deleted file mode 100644 index 253665c693e6..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ /dev/null @@ -1,223 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for MSM8998 target - -maintainers: - - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for MSM8998 target. - -properties: - compatible: - items: - - const: qcom,msm8998-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock - - description: Display AXI clock - - description: Display core clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,msm8998-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for regdma register set - - description: Address offset and size for vbif register set - - description: Address offset and size for non-realtime vbif register set - - reg-names: - items: - - const: mdp - - const: regdma - - const: vbif - - const: vbif_nrt - - clocks: - items: - - description: Display ahb clock - - description: Display axi clock - - description: Display mem-noc clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: iface - - const: bus - - const: mnoc - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,mmcc-msm8998.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - mdss: display-subsystem@c900000 { - compatible = "qcom,msm8998-mdss"; - reg = <0x0c900000 0x1000>; - reg-names = "mdss"; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - #address-cells = <1>; - #interrupt-cells = <1>; - #size-cells = <1>; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - iommus = <&mmss_smmu 0>; - - power-domains = <&mmcc MDSS_GDSC>; - ranges; - - display-controller@c901000 { - compatible = "qcom,msm8998-dpu"; - reg = <0x0c901000 0x8f000>, - <0x0c9a8e00 0xf0>, - <0x0c9b0000 0x2008>, - <0x0c9b8000 0x1040>; - reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MNOC_AHB_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "mnoc", "core", "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmpd MSM8998_VDDMX>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml deleted file mode 100644 index c5824e1d2382..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ /dev/null @@ -1,222 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for QCM2290 target - -maintainers: - - Loic Poulain <loic.poulain@linaro.org> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS - and DPU are mentioned for QCM2290 target. - -properties: - compatible: - items: - - const: qcom,qcm2290-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AXI clock - - description: Display core clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 - - ranges: true - - interconnects: - items: - - description: Interconnect path specifying the port ids for data bus - - interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,qcm2290-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display AXI clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock from dispcc - - description: Display lut clock from dispcc - - description: Display vsync clock from dispcc - - clock-names: - items: - - const: bus - - const: iface - - const: core - - const: lut - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> - #include <dt-bindings/clock/qcom,gcc-qcm2290.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interconnect/qcom,qcm2290.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - mdss: mdss@5e00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qcm2290-mdss"; - reg = <0x05e00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x420 0x2>, - <&apps_smmu 0x421 0x0>; - ranges; - - mdss_mdp: display-controller@5e01000 { - compatible = "qcom,qcm2290-dpu"; - reg = <0x05e01000 0x8f000>, - <0x05eb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", "iface", "core", "lut", "vsync"; - - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmpd QCM2290_VDDCX>; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml deleted file mode 100644 index 4890bc25f3fd..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ /dev/null @@ -1,235 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SC7180 target - -maintainers: - - Krishna Manikandan <quic_mkrishn@quicinc.com> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SC7180 target. - -properties: - compatible: - items: - - const: qcom,sc7180-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: ahb - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true - - interconnects: - items: - - description: Interconnect path specifying the port ids for data bus - - interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,sc7180-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display hf axi clock - - description: Display ahb clock - - description: Display rotator clock - - description: Display lut clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: bus - - const: iface - - const: rot - - const: lut - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF0 (DP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-sc7180.h> - #include <dt-bindings/clock/qcom,gcc-sc7180.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interconnect/qcom,sdm845.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sc7180-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "ahb", "core"; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x800 0x2>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sc7180-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_ROT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", "iface", "rot", "lut", "core", - "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SC7180_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@2 { - reg = <2>; - dpu_intf0_out: endpoint { - remote-endpoint = <&dp_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml deleted file mode 100644 index 584d646021d5..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ /dev/null @@ -1,239 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SC7280 - -maintainers: - - Krishna Manikandan <quic_mkrishn@quicinc.com> - -description: | - Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SC7280. - -properties: - compatible: - const: qcom,sc7280-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: ahb - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true - - interconnects: - items: - - description: Interconnect path specifying the port ids for data bus - - interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - const: qcom,sc7280-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display hf axi clock - - description: Display sf axi clock - - description: Display ahb clock - - description: Display lut clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: bus - - const: nrt_bus - - const: iface - - const: lut - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF5 (EDP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-sc7280.h> - #include <dt-bindings/clock/qcom,gcc-sc7280.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interconnect/qcom,sc7280.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sc7280-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", - "ahb", - "core"; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x900 0x402>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sc7280-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&gcc GCC_DISP_SF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", - "nrt_bus", - "iface", - "lut", - "core", - "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf5_out: endpoint { - remote-endpoint = <&edp_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml deleted file mode 100644 index 7d1037373175..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ /dev/null @@ -1,217 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SDM845 target - -maintainers: - - Krishna Manikandan <quic_mkrishn@quicinc.com> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SDM845 target. - -properties: - compatible: - items: - - const: qcom,sdm845-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 - - ranges: true - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,sdm845-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display ahb clock - - description: Display axi clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-sdm845.h> - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sdm845-mdss"; - reg = <0x0ae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "core"; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - iommus = <&apps_smmu 0x880 0x8>, - <&apps_smmu 0xc80 0x8>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 3b609c19e0bc..f2c143730a55 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -49,6 +49,7 @@ properties: maxItems: 1 phy-names: + deprecated: true const: dsi "#address-cells": true @@ -80,6 +81,9 @@ properties: operating-points-v2: true + opp-table: + type: object + ports: $ref: "/schemas/graph.yaml#/properties/ports" description: | @@ -131,7 +135,6 @@ required: - clocks - clock-names - phys - - phy-names - assigned-clocks - assigned-clock-parents - power-domains diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 1342d74ecfe0..819de5ce0bc9 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-2290 - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 43d11279c925..65d03c58dee6 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -2,37 +2,9 @@ Qualcomm adreno/snapdragon MDP5 display controller Description: -This is the bindings documentation for the Mobile Display Subsytem(MDSS) that -encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display +This is the bindings documentation for the MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. -MDSS: -Required properties: -- compatible: - * "qcom,mdss" - MDSS -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdss_phys" - * "vbif_phys" -- interrupts: The interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "iface" - * "bus" - * "vsync" -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - MDP5: Required properties: - compatible: diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml new file mode 100644 index 000000000000..27d7242657b2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display MDSS common properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. + +properties: + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + minItems: 1 + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + + interconnects: + minItems: 1 + items: + - description: Interconnect path from mdp0 (or a single mdp) port to the data bus + - description: Interconnect path from mdp1 port to the data bus + + interconnect-names: + minItems: 1 + items: + - const: mdp0-mem + - const: mdp1-mem + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml new file mode 100644 index 000000000000..ba0460268731 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Mobile Display SubSystem (MDSS) + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: + This is the bindings documentation for the Mobile Display Subsytem(MDSS) that + encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. + +properties: + compatible: + enum: + - qcom,mdss + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: mdss_phys + - const: vbif_phys + - const: vbif_nrt_phys + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + power-domains: + maxItems: 1 + description: | + The MDSS power domain provided by GCC + + clocks: + minItems: 1 + items: + - description: Display abh clock + - description: Display axi clock + - description: Display vsync clock + + clock-names: + minItems: 1 + items: + - const: iface + - const: bus + - const: vsync + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - "#interrupt-cells" + - power-domains + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^mdp@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdp5 + + "^dsi@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 + - qcom,dsi-phy-20nm + - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-lp + + "^hdmi-phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8996 + + "^hdmi-tx@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml new file mode 100644 index 000000000000..b02adba36e9e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for MSM8998 target + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,msm8998-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for regdma register set + - description: Address offset and size for vbif register set + - description: Address offset and size for non-realtime vbif register set + + reg-names: + items: + - const: mdp + - const: regdma + - const: vbif + - const: vbif_nrt + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display mem-noc clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: mnoc + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml new file mode 100644 index 000000000000..cf52ff77a41a --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml @@ -0,0 +1,268 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8998 Display MDSS + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for MSM8998 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,msm8998-mdss + + clocks: + items: + - description: Display AHB clock + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,msm8998-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm-8998 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@c900000 { + compatible = "qcom,msm8998-mdss"; + reg = <0x0c900000 0x1000>; + reg-names = "mdss"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + #address-cells = <1>; + #interrupt-cells = <1>; + #size-cells = <1>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + iommus = <&mmss_smmu 0>; + + power-domains = <&mmcc MDSS_GDSC>; + ranges; + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@c994000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c994000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@c994400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c994400 0x200>, + <0x0c994600 0x280>, + <0x0c994a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; + + dsi@c996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_BYTE1_INTF_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@c996400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c996400 0x200>, + <0x0c996600 0x280>, + <0x0c996a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml new file mode 100644 index 000000000000..a7b382f01b56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for QCM2290 target + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,qcm2290-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock from dispcc + - description: Display lut clock from dispcc + - description: Display vsync clock from dispcc + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml new file mode 100644 index 000000000000..d6f043a4b08d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCM220 Display MDSS + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for QCM2290 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,qcm2290-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,qcm2290-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-ctrl-6g-qcm2290 + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,qcm2290.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qcm2290-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,dsi-ctrl-6g-qcm2290"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + vcca-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml new file mode 100644 index 000000000000..bd590a6b5b96 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7180 target + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sc7180-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml new file mode 100644 index 000000000000..13e396d61a51 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -0,0 +1,304 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7180 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sc7180-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7180-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7180-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7180-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x800 0x2>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + phys = <&dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml new file mode 100644 index 000000000000..924059b387b6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7280 + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sc7280-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml new file mode 100644 index 000000000000..a3de1744ba11 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -0,0 +1,422 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7280. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sc7280-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^edp@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-edp + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + enum: + - qcom,sc7280-dsi-phy-7nm + - qcom,sc7280-edp-phy + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7280-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&mdss_dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + vdds-supply = <&vreg_dsi_supply>; + }; + + edp@aea0000 { + compatible = "qcom,sc7280-edp"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hot_plug_det>; + + reg = <0xaea0000 0x200>, + <0xaea0200 0x200>, + <0xaea0400 0xc00>, + <0xaea1000 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; + + phys = <&mdss_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_edp_out: endpoint { }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp_phy: phy@aec2a00 { + compatible = "qcom,sc7280-edp-phy"; + + reg = <0xaec2a00 0x19c>, + <0xaec2200 0xa0>, + <0xaec2600 0xa0>, + <0xaec2000 0x1c0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml new file mode 100644 index 000000000000..5719b45f2860 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SDM845 target + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display GCC bus clock + - description: Display ahb clock + - description: Display axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: gcc-bus + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml new file mode 100644 index 000000000000..31ca6f99fc22 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml @@ -0,0 +1,270 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SDM845 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sdm845-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sdm845-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml new file mode 100644 index 000000000000..4a39a3031409 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SM6115 target + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6115-dpu + + reg: + items: + - description: MDP register set + - description: VBIF register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI + - description: Display AHB + - description: Display core + - description: Display lut + - description: Display rotator + - description: Display vsync + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: rot + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm6115-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml new file mode 100644 index 000000000000..a86d7f53fa84 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for SM6115 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6115-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + iommus: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6115-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-ctrl-6g-qcm2290 + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm6115-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sm6115-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,dsi-ctrl-6g-qcm2290"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + phys = <&dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml new file mode 100644 index 000000000000..9ff8a265c85f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display DPU + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8250-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml new file mode 100644 index 000000000000..0d3be5386b3f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM8250 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8250-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8250-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-7nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8250-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml index 1c7149f7d171..ee2726149cf3 100644 --- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml +++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml @@ -15,9 +15,22 @@ description: properties: compatible: - enum: - - qcom,sfpb-mutex - - qcom,tcsr-mutex + oneOf: + - enum: + - qcom,sfpb-mutex + - qcom,tcsr-mutex + - items: + - enum: + - qcom,apq8084-tcsr-mutex + - qcom,ipq6018-tcsr-mutex + - qcom,msm8226-tcsr-mutex + - qcom,msm8994-tcsr-mutex + - const: qcom,tcsr-mutex + - items: + - enum: + - qcom,msm8974-tcsr-mutex + - const: qcom,tcsr-mutex + - const: syscon reg: maxItems: 1 @@ -34,9 +47,9 @@ additionalProperties: false examples: - | - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x01f40000 0x40000>; - #hwlock-cells = <1>; - }; + hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; ... diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index fe1c5016f7f3..1c191bc5a178 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -16,8 +16,11 @@ description: properties: compatible: - items: + oneOf: - const: goodix,gt7375p + - items: + - const: goodix,gt7986u + - const: goodix,gt7375p reg: enum: diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml index 5bd964a46a9d..a6921e805e37 100644 --- a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -47,7 +47,7 @@ properties: nvmem-cells: true - nvmem-cells-names: true + nvmem-cell-names: true phy-connection-type: enum: diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 1e2b9b627b12..2722dc7bb03d 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -274,10 +274,6 @@ patternProperties: slew-rate: enum: [0, 1] - output-enable: - description: - This will internally disable the tri-state for MIO pins. - drive-strength: description: Selects the drive strength for MIO pins, in mA. diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml index 58022ae7d5dd..dfdb8dfb6b65 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -81,6 +81,9 @@ properties: power-supply: true + power-domains: + maxItems: 1 + resets: description: | A number of phandles to resets that need to be asserted during diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index c3e9f3485449..dea293f403d9 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,7 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang <cychiang@chromium.org> - - Tzung-Bi Shih <tzungbi@google.com> + - Tzung-Bi Shih <tzungbi@kernel.org> description: | Google's ChromeOS EC codec is a digital mic codec provided by the diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml index 1d73204451b1..ea7d4900ee4a 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Realtek rt1015p codec devicetree bindings maintainers: - - Tzung-Bi Shih <tzungbi@google.com> + - Tzung-Bi Shih <tzungbi@kernel.org> description: | Rt1015p is a rt1015 variant which does not support I2C and diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst index 3e2dae954898..4b4d8e28d3be 100644 --- a/Documentation/driver-api/basics.rst +++ b/Documentation/driver-api/basics.rst @@ -107,9 +107,6 @@ Kernel utility functions .. kernel-doc:: kernel/panic.c :export: -.. kernel-doc:: include/linux/overflow.h - :internal: - Device Resource Management -------------------------- diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index 687adb58048e..56082265e8e5 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -279,6 +279,7 @@ GPIO devm_gpio_request_one() I2C + devm_i2c_add_adapter() devm_i2c_new_dummy_device() IIO diff --git a/Documentation/driver-api/miscellaneous.rst b/Documentation/driver-api/miscellaneous.rst index 304ffb146cf9..4a5104a368ac 100644 --- a/Documentation/driver-api/miscellaneous.rst +++ b/Documentation/driver-api/miscellaneous.rst @@ -16,12 +16,11 @@ Parallel Port Devices 16x50 UART Driver ================= -.. kernel-doc:: drivers/tty/serial/serial_core.c - :export: - .. kernel-doc:: drivers/tty/serial/8250/8250_core.c :export: +See serial/driver.rst for related APIs. + Pulse-Width Modulation (PWM) ============================ diff --git a/Documentation/kbuild/reproducible-builds.rst b/Documentation/kbuild/reproducible-builds.rst index 071f0151a7a4..f2dcc39044e6 100644 --- a/Documentation/kbuild/reproducible-builds.rst +++ b/Documentation/kbuild/reproducible-builds.rst @@ -119,6 +119,16 @@ To avoid this, you can make the vDSO different for different kernel versions by including an arbitrary string of "salt" in it. This is specified by the Kconfig symbol ``CONFIG_BUILD_SALT``. +Git +--- + +Uncommitted changes or different commit ids in git can also lead +to different compilation results. For example, after executing +``git reset HEAD^``, even if the code is the same, the +``include/config/kernel.release`` generated during compilation +will be different, which will eventually lead to binary differences. +See ``scripts/setlocalversion`` for details. + .. _KBUILD_BUILD_TIMESTAMP: kbuild.html#kbuild-build-timestamp .. _KBUILD_BUILD_USER and KBUILD_BUILD_HOST: kbuild.html#kbuild-build-user-kbuild-build-host .. _KCFLAGS: kbuild.html#kcflags diff --git a/Documentation/kernel-hacking/hacking.rst b/Documentation/kernel-hacking/hacking.rst index 9a1f020c8449..1717348a4404 100644 --- a/Documentation/kernel-hacking/hacking.rst +++ b/Documentation/kernel-hacking/hacking.rst @@ -120,7 +120,7 @@ You can tell you are in a softirq (or tasklet) using the .. warning:: Beware that this will return a false positive if a - :ref:`botton half lock <local_bh_disable>` is held. + :ref:`bottom half lock <local_bh_disable>` is held. Some Basic Rules ================ diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst index e05fb1b8f8b6..6a919cffcbfd 100644 --- a/Documentation/process/2.Process.rst +++ b/Documentation/process/2.Process.rst @@ -126,17 +126,10 @@ than one development cycle past their initial release. So, for example, the 5.2.21 was the final stable update of the 5.2 release. Some kernels are designated "long term" kernels; they will receive support -for a longer period. As of this writing, the current long term kernels -and their maintainers are: - - ====== ================================ ======================= - 3.16 Ben Hutchings (very long-term kernel) - 4.4 Greg Kroah-Hartman & Sasha Levin (very long-term kernel) - 4.9 Greg Kroah-Hartman & Sasha Levin - 4.14 Greg Kroah-Hartman & Sasha Levin - 4.19 Greg Kroah-Hartman & Sasha Levin - 5.4 Greg Kroah-Hartman & Sasha Levin - ====== ================================ ======================= +for a longer period. Please refer to the following link for the list of active +long term kernel versions and their maintainers: + + https://www.kernel.org/category/releases.html The selection of a kernel for long-term support is purely a matter of a maintainer having the need and the time to maintain that release. There diff --git a/Documentation/process/code-of-conduct-interpretation.rst b/Documentation/process/code-of-conduct-interpretation.rst index 922e0b547bc3..66b07f14714c 100644 --- a/Documentation/process/code-of-conduct-interpretation.rst +++ b/Documentation/process/code-of-conduct-interpretation.rst @@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're uncertain how to handle situations that come up. It will not be considered a violation report unless you want it to be. If you are uncertain about approaching the TAB or any other maintainers, please -reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>. +reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>. In the end, "be kind to each other" is really what the end goal is for everybody. We know everyone is human and we all fail at times, but the diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst index bd15c393ba3c..cb6abcb2b6d0 100644 --- a/Documentation/process/howto.rst +++ b/Documentation/process/howto.rst @@ -36,7 +36,7 @@ experience, the following books are good for, if anything, reference: - "C: A Reference Manual" by Harbison and Steele [Prentice Hall] The kernel is written using GNU C and the GNU toolchain. While it -adheres to the ISO C89 standard, it uses a number of extensions that are +adheres to the ISO C11 standard, it uses a number of extensions that are not featured in the standard. The kernel is a freestanding C environment, with no reliance on the standard C library, so some portions of the C standard are not supported. Arbitrary long long diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index d14007081595..1fa5ab8754d3 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -319,3 +319,13 @@ unpatched tree to confirm infrastructure didn't mangle it. Finally, go back and read :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` to be sure you are not repeating some common mistake documented there. + +My company uses peer feedback in employee performance reviews. Can I ask netdev maintainers for feedback? +--------------------------------------------------------------------------------------------------------- + +Yes, especially if you spend significant amount of time reviewing code +and go out of your way to improve shared infrastructure. + +The feedback must be requested by you, the contributor, and will always +be shared with you (even if you request for it to be submitted to your +manager). diff --git a/Documentation/subsystem-apis.rst b/Documentation/subsystem-apis.rst index af65004a80aa..b51f38527e14 100644 --- a/Documentation/subsystem-apis.rst +++ b/Documentation/subsystem-apis.rst @@ -43,6 +43,7 @@ needed). input/index hwmon/index gpu/index + accel/index security/index sound/index crypto/index diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst index c1b685a38f6b..87bd772836c0 100644 --- a/Documentation/trace/histogram.rst +++ b/Documentation/trace/histogram.rst @@ -39,7 +39,7 @@ Documentation written by Tom Zanussi will use the event's kernel stacktrace as the key. The keywords 'keys' or 'key' can be used to specify keys, and the keywords 'values', 'vals', or 'val' can be used to specify values. Compound - keys consisting of up to two fields can be specified by the 'keys' + keys consisting of up to three fields can be specified by the 'keys' keyword. Hashing a compound key produces a unique entry in the table for each unique combination of component keys, and can be useful for providing more fine-grained summaries of event data. diff --git a/Documentation/translations/it_IT/process/howto.rst b/Documentation/translations/it_IT/process/howto.rst index 15c08aea1dfe..052f1b3610cb 100644 --- a/Documentation/translations/it_IT/process/howto.rst +++ b/Documentation/translations/it_IT/process/howto.rst @@ -44,7 +44,7 @@ altro, utili riferimenti: - "C: A Reference Manual" di Harbison and Steele [Prentice Hall] Il kernel è stato scritto usando GNU C e la toolchain GNU. -Sebbene si attenga allo standard ISO C89, esso utilizza una serie di +Sebbene si attenga allo standard ISO C11, esso utilizza una serie di estensioni che non sono previste in questo standard. Il kernel è un ambiente C indipendente, che non ha alcuna dipendenza dalle librerie C standard, così alcune parti del C standard non sono supportate. diff --git a/Documentation/translations/ja_JP/howto.rst b/Documentation/translations/ja_JP/howto.rst index b47a682d8ded..b8eeb45a02d4 100644 --- a/Documentation/translations/ja_JP/howto.rst +++ b/Documentation/translations/ja_JP/howto.rst @@ -65,7 +65,7 @@ Linux カーネル開発のやり方 - 『新・詳説 C 言語 H&S リファレンス』 (サミュエル P ハービソン/ガイ L スティール共著 斉藤 信男監訳)[ソフトバンク] カーネルは GNU C と GNU ツールチェインを使って書かれています。カーネル -は ISO C89 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って +は ISO C11 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って います。カーネルは標準 C ライブラリに依存しない、C 言語非依存環境です。 そのため、C の標準の中で使えないものもあります。特に任意の long long の除算や浮動小数点は使えません。カーネルがツールチェインや C 言語拡張 diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst index df53fafd1b10..969e91a95bb0 100644 --- a/Documentation/translations/ko_KR/howto.rst +++ b/Documentation/translations/ko_KR/howto.rst @@ -62,7 +62,7 @@ Documentation/process/howto.rst - "Practical C Programming" by Steve Oualline [O'Reilly] - "C: A Reference Manual" by Harbison and Steele [Prentice Hall] -커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C89 표준을 +커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C11 표준을 따르는 반면 표준에 있지 않은 많은 확장기능도 가지고 있다. 커널은 표준 C 라이브러리와는 관계없이 freestanding C 환경이어서 C 표준의 일부는 지원되지 않는다. 임의의 long long 나누기나 floating point는 지원되지 않는다. diff --git a/Documentation/translations/zh_CN/process/howto.rst b/Documentation/translations/zh_CN/process/howto.rst index 5bf953146929..888978a62db3 100644 --- a/Documentation/translations/zh_CN/process/howto.rst +++ b/Documentation/translations/zh_CN/process/howto.rst @@ -45,7 +45,7 @@ Linux内核大部分是由C语言写成的，一些体系结构相关的代码 - "C: A Reference Manual" by Harbison and Steele [Prentice Hall] 《C语言参考手册（原书第5版）》（邱仲潘 等译）[机械工业出版社] -Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C89标准，但也用到了一些 +Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C11标准，但也用到了一些 标准中没有定义的扩展。内核是自给自足的C环境，不依赖于标准C库的支持，所以 并不支持C标准中的部分定义。比如long long类型的大数除法和浮点运算就不允许 使用。有时候确实很难弄清楚内核对工具链的要求和它所使用的扩展，不幸的是目 diff --git a/Documentation/translations/zh_TW/process/howto.rst b/Documentation/translations/zh_TW/process/howto.rst index 86b0d4c6d6f9..8fb8edcaee66 100644 --- a/Documentation/translations/zh_TW/process/howto.rst +++ b/Documentation/translations/zh_TW/process/howto.rst @@ -48,7 +48,7 @@ Linux內核大部分是由C語言寫成的，一些體系結構相關的代碼 - "C: A Reference Manual" by Harbison and Steele [Prentice Hall] 《C語言參考手冊（原書第5版）》（邱仲潘 等譯）[機械工業出版社] -Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C89標準，但也用到了一些 +Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C11標準，但也用到了一些 標準中沒有定義的擴展。內核是自給自足的C環境，不依賴於標準C庫的支持，所以 並不支持C標準中的部分定義。比如long long類型的大數除法和浮點運算就不允許 使用。有時候確實很難弄清楚內核對工具鏈的要求和它所使用的擴展，不幸的是目 diff --git a/Documentation/virt/kvm/devices/vm.rst b/Documentation/virt/kvm/devices/vm.rst index 0aa5b1cfd700..60acc39e0e93 100644 --- a/Documentation/virt/kvm/devices/vm.rst +++ b/Documentation/virt/kvm/devices/vm.rst @@ -215,6 +215,7 @@ KVM_S390_VM_TOD_EXT). :Parameters: address of a buffer in user space to store the data (u8) to :Returns: -EFAULT if the given address is not accessible from kernel space; -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) 3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW ----------------------------------- @@ -224,6 +225,7 @@ the POP (u64). :Parameters: address of a buffer in user space to store the data (u64) to :Returns: -EFAULT if the given address is not accessible from kernel space + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) 3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT ----------------------------------- @@ -237,6 +239,7 @@ it, it is stored as 0 and not allowed to be set to a value != 0. (kvm_s390_vm_tod_clock) to :Returns: -EFAULT if the given address is not accessible from kernel space; -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) 4. GROUP: KVM_S390_VM_CRYPTO ============================ |