diff options
Diffstat (limited to 'Documentation')
52 files changed, 715 insertions, 248 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-firmware b/Documentation/ABI/testing/sysfs-class-firmware index 978d3d500400..fba87a55f3ca 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware +++ b/Documentation/ABI/testing/sysfs-class-firmware @@ -1,7 +1,7 @@ What: /sys/class/firmware/.../data Date: July 2022 KernelVersion: 5.19 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Russ Weight <russ.weight@linux.dev> Description: The data sysfs file is used for firmware-fallback and for firmware uploads. Cat a firmware image to this sysfs file after you echo 1 to the loading sysfs file. When the firmware @@ -13,7 +13,7 @@ Description: The data sysfs file is used for firmware-fallback and for What: /sys/class/firmware/.../cancel Date: July 2022 KernelVersion: 5.19 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Russ Weight <russ.weight@linux.dev> Description: Write-only. For firmware uploads, write a "1" to this file to request that the transfer of firmware data to the lower-level device be canceled. This request will be rejected (EBUSY) if @@ -23,7 +23,7 @@ Description: Write-only. For firmware uploads, write a "1" to this file to What: /sys/class/firmware/.../error Date: July 2022 KernelVersion: 5.19 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Russ Weight <russ.weight@linux.dev> Description: Read-only. Returns a string describing a failed firmware upload. This string will be in the form of <STATUS>:<ERROR>, where <STATUS> will be one of the status strings described @@ -37,7 +37,7 @@ Description: Read-only. Returns a string describing a failed firmware What: /sys/class/firmware/.../loading Date: July 2022 KernelVersion: 5.19 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Russ Weight <russ.weight@linux.dev> Description: The loading sysfs file is used for both firmware-fallback and for firmware uploads. Echo 1 onto the loading file to indicate you are writing a firmware file to the data sysfs node. Echo @@ -49,7 +49,7 @@ Description: The loading sysfs file is used for both firmware-fallback and What: /sys/class/firmware/.../remaining_size Date: July 2022 KernelVersion: 5.19 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Russ Weight <russ.weight@linux.dev> Description: Read-only. For firmware upload, this file contains the size of the firmware data that remains to be transferred to the lower-level device driver. The size value is initialized to @@ -62,7 +62,7 @@ Description: Read-only. For firmware upload, this file contains the size What: /sys/class/firmware/.../status Date: July 2022 KernelVersion: 5.19 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Russ Weight <russ.weight@linux.dev> Description: Read-only. Returns a string describing the current status of a firmware upload. The string will be one of the following: idle, "receiving", "preparing", "transferring", "programming". @@ -70,7 +70,7 @@ Description: Read-only. Returns a string describing the current status of What: /sys/class/firmware/.../timeout Date: July 2022 KernelVersion: 5.19 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Russ Weight <russ.weight@linux.dev> Description: This file supports the timeout mechanism for firmware fallback. This file has no affect on firmware uploads. For more information on timeouts please see the documentation diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update index 0a41afe0ab4c..9051695d2211 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update +++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update @@ -1,7 +1,7 @@ What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_root_entry_hash Date: Sep 2022 KernelVersion: 5.20 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns the root entry hash for the static region if one is programmed, else it returns the string: "hash not programmed". This file is only @@ -11,7 +11,7 @@ Description: Read only. Returns the root entry hash for the static What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_root_entry_hash Date: Sep 2022 KernelVersion: 5.20 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns the root entry hash for the partial reconfiguration region if one is programmed, else it returns the string: "hash not programmed". This file @@ -21,7 +21,7 @@ Description: Read only. Returns the root entry hash for the partial What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_root_entry_hash Date: Sep 2022 KernelVersion: 5.20 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns the root entry hash for the BMC image if one is programmed, else it returns the string: "hash not programmed". This file is only visible if the @@ -31,7 +31,7 @@ Description: Read only. Returns the root entry hash for the BMC image What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_canceled_csks Date: Sep 2022 KernelVersion: 5.20 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns a list of indices for canceled code signing keys for the static region. The standard bitmap list format is used (e.g. "1,2-6,9"). @@ -39,7 +39,7 @@ Description: Read only. Returns a list of indices for canceled code What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_canceled_csks Date: Sep 2022 KernelVersion: 5.20 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns a list of indices for canceled code signing keys for the partial reconfiguration region. The standard bitmap list format is used (e.g. "1,2-6,9"). @@ -47,7 +47,7 @@ Description: Read only. Returns a list of indices for canceled code What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_canceled_csks Date: Sep 2022 KernelVersion: 5.20 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns a list of indices for canceled code signing keys for the BMC. The standard bitmap list format is used (e.g. "1,2-6,9"). @@ -55,7 +55,7 @@ Description: Read only. Returns a list of indices for canceled code What: /sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/flash_count Date: Sep 2022 KernelVersion: 5.20 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns number of times the secure update staging area has been flashed. Format: "%u". diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst index 5f502bf68fbc..ff456871bf4b 100644 --- a/Documentation/admin-guide/cgroup-v1/memory.rst +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -92,6 +92,13 @@ Brief summary of control files. memory.oom_control set/show oom controls. memory.numa_stat show the number of memory usage per numa node + memory.kmem.limit_in_bytes Deprecated knob to set and read the kernel + memory hard limit. Kernel hard limit is not + supported since 5.16. Writing any value to + do file will not have any effect same as if + nokmem kernel parameter was specified. + Kernel memory is still charged and reported + by memory.kmem.usage_in_bytes. memory.kmem.usage_in_bytes show current kernel memory allocation memory.kmem.failcnt show the number of kernel memory usage hits limits diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index e96f057ea2a0..f47f63bcf67c 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -71,6 +71,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2658417 | ARM64_ERRATUM_2658417 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A520 | #2966298 | ARM64_ERRATUM_2966298 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 | diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst index 5d7b01aed1fe..0046af06531a 100644 --- a/Documentation/core-api/workqueue.rst +++ b/Documentation/core-api/workqueue.rst @@ -244,7 +244,7 @@ unbound worker-pools and only one work item could be active at any given time thus achieving the same ordering property as ST wq. In the current implementation the above configuration only guarantees -ST behavior within a given NUMA node. Instead ``alloc_ordered_queue()`` should +ST behavior within a given NUMA node. Instead ``alloc_ordered_workqueue()`` should be used to achieve system-wide ST behavior. @@ -390,7 +390,7 @@ The default affinity scope can be changed with the module parameter scope can be changed using ``apply_workqueue_attrs()``. If ``WQ_SYSFS`` is set, the workqueue will have the following affinity scope -related interface files under its ``/sys/devices/virtual/WQ_NAME/`` +related interface files under its ``/sys/devices/virtual/workqueue/WQ_NAME/`` directory. ``affinity_scope`` diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index 337ddf1113c4..4e867dd4d402 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -38,6 +38,7 @@ patternProperties: ID number 0 and the slave drive will have ID number 1. The PATA port nodes will be named "ide-port". type: object + additionalProperties: false properties: reg: diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml index b568d0ce438d..7e1ffc551046 100644 --- a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml +++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml @@ -73,9 +73,6 @@ patternProperties: "^.*@[0-9a-f]+$": description: Devices attached to the bus type: object - properties: - reg: - maxItems: 1 required: - reg diff --git a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml index 9ab5f0c435d4..d2cbe49f4e15 100644 --- a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml +++ b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml @@ -69,7 +69,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - cache-controller@2010000 { + cache-controller@13400000 { compatible = "andestech,ax45mp-cache", "cache"; reg = <0x13400000 0x100000>; interrupts = <508 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml index 839648e753d4..42b6f80613f3 100644 --- a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml @@ -37,6 +37,9 @@ properties: maxItems: 1 '#clock-cells': + description: + The index in the assigned-clocks is mapped to the output clock as below + 0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2. const: 1 clocks: @@ -68,7 +71,7 @@ examples: reg = <0x68>; #clock-cells = <1>; - clocks = <&x1_x2>; + clocks = <&x1>; renesas,settings = [ 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf @@ -79,8 +82,8 @@ examples: assigned-clocks = <&versa3 0>, <&versa3 1>, <&versa3 2>, <&versa3 3>, <&versa3 4>, <&versa3 5>; - assigned-clock-rates = <12288000>, <25000000>, - <12000000>, <11289600>, - <11289600>, <24000000>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; }; }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml index af7fe9c4d196..7979cf07f119 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml @@ -87,7 +87,7 @@ required: - interrupts - ports -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml index 23ada8f87526..769ce23aaac2 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml @@ -13,6 +13,8 @@ description: | maintainers: - Michael Tretter <m.tretter@pengutronix.de> + - Harini Katakam <harini.katakam@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> allOf: - $ref: ../dma-controller.yaml# @@ -65,6 +67,7 @@ required: - interrupts - clocks - clock-names + - xlnx,bus-width additionalProperties: false diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml index 21ae7bce038e..171a41407241 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -9,6 +9,9 @@ title: Freescale MXS Inter IC (I2C) Controller maintainers: - Shawn Guo <shawnguo@kernel.org> +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + properties: compatible: enum: @@ -37,7 +40,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index 7cc4ddc4e9b7..2aa1f4b063eb 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -61,7 +61,7 @@ patternProperties: required: - reg - additionalProperties: true + additionalProperties: false allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml index 2594fa192f93..2a04906531fb 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml @@ -32,7 +32,8 @@ properties: spi-cpol: true - reset-gpios: true + reset-gpios: + maxItems: 1 interrupts: minItems: 1 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index 4e508bfcc9d8..5121685337b5 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -78,7 +78,8 @@ properties: - const: -1000 - const: 22000 - reset-gpios: true + reset-gpios: + maxItems: 1 adi,dc-dc-ilim-microamp: enum: [150000, 200000, 250000, 300000, 350000, 400000] diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml index b9b5beac33b2..5b6cde86b5a5 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml @@ -23,7 +23,8 @@ properties: maxItems: 1 description: Connected to ADC_RDY pin. - reset-gpios: true + reset-gpios: + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml index 2958c4ca75b4..167d10bd60af 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml @@ -23,7 +23,8 @@ properties: maxItems: 1 description: Connected to ADC_RDY pin. - reset-gpios: true + reset-gpios: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml index 8376d64a641a..bed42d5d0d94 100644 --- a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml +++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml @@ -45,5 +45,6 @@ examples: light-sensor@38 { compatible = "rohm,bu27010"; reg = <0x38>; + vdd-supply = <&vdd>; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 2bc38479a41e..0f4a062c9d6f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -106,6 +106,12 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 maximum: 4096 + dma-noncoherent: + description: + Present if the GIC redistributors permit programming shareability + and cacheability attributes but are connected to a non-coherent + downstream interconnect. + msi-controller: description: Only present if the Message Based Interrupt functionality is @@ -193,6 +199,12 @@ patternProperties: compatible: const: arm,gic-v3-its + dma-noncoherent: + description: + Present if the GIC ITS permits programming shareability and + cacheability attributes but is connected to a non-coherent + downstream interconnect. + msi-controller: true "#msi-cells": diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index 95033cb514fb..b417341fc8ae 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -37,6 +37,7 @@ properties: - renesas,intc-ex-r8a77990 # R-Car E3 - renesas,intc-ex-r8a77995 # R-Car D3 - renesas,intc-ex-r8a779a0 # R-Car V3U + - renesas,intc-ex-r8a779f0 # R-Car S4-8 - renesas,intc-ex-r8a779g0 # R-Car V4H - const: renesas,irqc diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml index 33b90e975e33..2ef3081eaaf3 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml @@ -19,20 +19,19 @@ description: | - NMI edge select (NMI is not treated as NMI exception and supports fall edge and stand-up edge detection interrupts) -allOf: - - $ref: /schemas/interrupt-controller.yaml# - properties: compatible: items: - enum: + - renesas,r9a07g043u-irqc # RZ/G2UL - renesas,r9a07g044-irqc # RZ/G2{L,LC} - renesas,r9a07g054-irqc # RZ/V2L - const: renesas,rzg2l-irqc '#interrupt-cells': - description: The first cell should contain external interrupt number (IRQ0-7) and the - second cell is used to specify the flag. + description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the + include/dt-bindings/interrupt-controller/irqc-rzg2l.h and the second + cell is used to specify the flag. const: 2 '#address-cells': @@ -44,7 +43,96 @@ properties: maxItems: 1 interrupts: - maxItems: 41 + minItems: 41 + items: + - description: NMI interrupt + - description: IRQ0 interrupt + - description: IRQ1 interrupt + - description: IRQ2 interrupt + - description: IRQ3 interrupt + - description: IRQ4 interrupt + - description: IRQ5 interrupt + - description: IRQ6 interrupt + - description: IRQ7 interrupt + - description: GPIO interrupt, TINT0 + - description: GPIO interrupt, TINT1 + - description: GPIO interrupt, TINT2 + - description: GPIO interrupt, TINT3 + - description: GPIO interrupt, TINT4 + - description: GPIO interrupt, TINT5 + - description: GPIO interrupt, TINT6 + - description: GPIO interrupt, TINT7 + - description: GPIO interrupt, TINT8 + - description: GPIO interrupt, TINT9 + - description: GPIO interrupt, TINT10 + - description: GPIO interrupt, TINT11 + - description: GPIO interrupt, TINT12 + - description: GPIO interrupt, TINT13 + - description: GPIO interrupt, TINT14 + - description: GPIO interrupt, TINT15 + - description: GPIO interrupt, TINT16 + - description: GPIO interrupt, TINT17 + - description: GPIO interrupt, TINT18 + - description: GPIO interrupt, TINT19 + - description: GPIO interrupt, TINT20 + - description: GPIO interrupt, TINT21 + - description: GPIO interrupt, TINT22 + - description: GPIO interrupt, TINT23 + - description: GPIO interrupt, TINT24 + - description: GPIO interrupt, TINT25 + - description: GPIO interrupt, TINT26 + - description: GPIO interrupt, TINT27 + - description: GPIO interrupt, TINT28 + - description: GPIO interrupt, TINT29 + - description: GPIO interrupt, TINT30 + - description: GPIO interrupt, TINT31 + - description: Bus error interrupt + + interrupt-names: + minItems: 41 + items: + - const: nmi + - const: irq0 + - const: irq1 + - const: irq2 + - const: irq3 + - const: irq4 + - const: irq5 + - const: irq6 + - const: irq7 + - const: tint0 + - const: tint1 + - const: tint2 + - const: tint3 + - const: tint4 + - const: tint5 + - const: tint6 + - const: tint7 + - const: tint8 + - const: tint9 + - const: tint10 + - const: tint11 + - const: tint12 + - const: tint13 + - const: tint14 + - const: tint15 + - const: tint16 + - const: tint17 + - const: tint18 + - const: tint19 + - const: tint20 + - const: tint21 + - const: tint22 + - const: tint23 + - const: tint24 + - const: tint25 + - const: tint26 + - const: tint27 + - const: tint28 + - const: tint29 + - const: tint30 + - const: tint31 + - const: bus-err clocks: maxItems: 2 @@ -72,6 +160,23 @@ required: - power-domains - resets +allOf: + - $ref: /schemas/interrupt-controller.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,r9a07g043u-irqc + then: + properties: + interrupts: + minItems: 42 + interrupt-names: + minItems: 42 + required: + - interrupt-names + unevaluatedProperties: false examples: @@ -80,55 +185,66 @@ examples: #include <dt-bindings/clock/r9a07g044-cpg.h> irqc: interrupt-controller@110a0000 { - compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; - reg = <0x110a0000 0x10000>; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, - <&cpg CPG_MOD R9A07G044_IA55_PCLK>; - clock-names = "clk", "pclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_IA55_RESETN>; + compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; + reg = <0x110a0000 0x10000>; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31"; + clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, + <&cpg CPG_MOD R9A07G044_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_IA55_RESETN>; }; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index cf29ab10501c..b1b2cf81b42f 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -270,6 +270,7 @@ allOf: contains: enum: - qcom,msm8998-smmu-v2 + - qcom,sdm630-smmu-v2 then: anyOf: - properties: @@ -311,7 +312,6 @@ allOf: compatible: contains: enum: - - qcom,sdm630-smmu-v2 - qcom,sm6375-smmu-v2 then: anyOf: diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml index ffccf5f3c9e3..642f9b15d359 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml @@ -54,6 +54,7 @@ properties: port: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false properties: endpoint: diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml index c5cab549ee8e..1c476b635b69 100644 --- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml @@ -69,6 +69,7 @@ properties: properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Input port properties: @@ -89,6 +90,7 @@ properties: port@1: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Output port properties: diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml index 358019e85d90..326284e151f6 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml @@ -59,7 +59,6 @@ allOf: compatible: contains: enum: - - fsl,imx8mq-csi - fsl,imx8mm-csi then: required: diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 324703bfb1bd..5539d0f8e74d 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -95,7 +95,7 @@ properties: synchronization is selected. default: 1 - field-active-even: true + field-even-active: true bus-width: true @@ -144,7 +144,7 @@ properties: synchronization is selected. default: 1 - field-active-even: true + field-even-active: true bus-width: true diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml index 79ff6d83a9fd..b3486c38a05b 100644 --- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -57,6 +57,7 @@ properties: patternProperties: "^port@[01]$": $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Camera A and camera B inputs. diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml index 9804d13de648..6a6f222b868f 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -31,10 +31,6 @@ properties: charger: $ref: /schemas/power/supply/maxim,max77693.yaml - connector: - $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - led: $ref: /schemas/leds/maxim,max77693.yaml diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 80141eb7fc6b..10f34aa8ba8a 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -69,7 +69,7 @@ properties: maxItems: 4 clocks: - minItems: 3 + minItems: 2 items: - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock - description: SDC MMC clock, MCLK diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml index 0972868735fc..0e07ab61a48d 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml @@ -12,7 +12,6 @@ maintainers: allOf: - $ref: /schemas/pci/pci-bus.yaml# - - $ref: /schemas/interrupt-controller/msi-controller.yaml# properties: compatible: @@ -34,13 +33,6 @@ properties: description: > Base address and length of the PCIe controller I/O register space - interrupt-map: true - - interrupt-map-mask: true - - "#interrupt-cells": - const: 1 - ranges: minItems: 1 maxItems: 2 @@ -54,16 +46,8 @@ properties: items: - const: pcie-phy - bus-range: true - dma-coherent: true - "#address-cells": true - - "#size-cells": true - - device_type: true - brcm,pcie-ob: type: boolean description: > @@ -78,20 +62,24 @@ properties: msi: type: object + $ref: /schemas/interrupt-controller/msi-controller.yaml# + unevaluatedProperties: false + properties: compatible: items: - const: brcm,iproc-msi - msi-parent: true + interrupts: + maxItems: 4 - msi-controller: true + brcm,pcie-msi-inten: + type: boolean + description: + Needs to be present for some older iProc platforms that require the + interrupt enable registers to be set explicitly to enable MSI - brcm,pcie-msi-inten: - type: boolean - description: > - Needs to be present for some older iProc platforms that require the - interrupt enable registers to be set explicitly to enable MSI + msi-parent: true dependencies: brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"] @@ -117,68 +105,69 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - - bus { - #address-cells = <1>; - #size-cells = <1>; - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, - <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; - - phys = <&phy 0 5>; - phy-names = "pcie-phy"; - - brcm,pcie-ob; - brcm,pcie-ob-axi-offset = <0x00000000>; - - msi-parent = <&msi0>; - - /* iProc event queue based MSI */ - msi0: msi { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, - <GIC_SPI 97 IRQ_TYPE_NONE>, - <GIC_SPI 98 IRQ_TYPE_NONE>, - <GIC_SPI 99 IRQ_TYPE_NONE>; - }; - }; - - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, - <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; - - phys = <&phy 1 6>; - phy-names = "pcie-phy"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <3>; + }; + + pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-axi-offset = <0x00000000>; + + msi-parent = <&msi0>; + + /* iProc event queue based MSI */ + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, + <GIC_SPI 97 IRQ_TYPE_NONE>, + <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>; + }; + }; + - | + pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&phy 1 6>; + phy-names = "pcie-phy"; }; diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml index 5073007267ad..634cec5d57ea 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml @@ -70,7 +70,7 @@ examples: phy@84000 { compatible = "qcom,ipq6018-qmp-pcie-phy"; - reg = <0x0 0x00084000 0x0 0x1000>; + reg = <0x00084000 0x1000>; clocks = <&gcc GCC_PCIE0_AUX_CLK>, <&gcc GCC_PCIE0_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 38c0b5213736..97e8441eda1c 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -91,6 +91,7 @@ properties: interrupt-controller: type: object + additionalProperties: false description: Describes the CPU's local interrupt controller properties: diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index cc1f546fdbdc..c91ab0e46648 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -128,6 +128,12 @@ properties: changes to interrupts as frozen at commit ccbddab ("Merge pull request #42 from riscv/jhauser-2023-RC4") of riscv-aia. + - const: smstateen + description: | + The standard Smstateen extension for controlling access to CSRs + added by other RISC-V extensions in H/S/VS/U/VU modes and as + ratified at commit a28bfae (Ratified (#7)) of riscv-state-enable. + - const: ssaia description: | The standard Ssaia supervisor-level extension for the advanced @@ -212,6 +218,12 @@ properties: ratified in the 20191213 version of the unprivileged ISA specification. + - const: zicond + description: + The standard Zicond extension for conditional arithmetic and + conditional-select/move operations as ratified in commit 95cf1f9 + ("Add changes requested by Ved during signoff") of riscv-zicond. + - const: zicsr description: | The standard Zicsr extension for control and status register diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml index da2dcfeebf12..510f6cb0f084 100644 --- a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml +++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml @@ -11,11 +11,16 @@ maintainers: properties: compatible: - items: - - enum: - - loongson,ls2k0500-pmc - - loongson,ls2k1000-pmc - - const: syscon + oneOf: + - items: + - const: loongson,ls2k0500-pmc + - const: syscon + - items: + - enum: + - loongson,ls2k1000-pmc + - loongson,ls2k2000-pmc + - const: loongson,ls2k0500-pmc + - const: syscon reg: maxItems: 1 @@ -32,6 +37,18 @@ properties: addition, the PM need according to it to indicate that current SoC whether support Suspend To RAM. + syscon-poweroff: + $ref: /schemas/power/reset/syscon-poweroff.yaml# + type: object + description: + Node for power off method + + syscon-reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + type: object + description: + Node for reboot method + required: - compatible - reg @@ -44,9 +61,23 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> power-management@1fe27000 { - compatible = "loongson,ls2k1000-pmc", "syscon"; + compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon"; reg = <0x1fe27000 0x58>; interrupt-parent = <&liointc1>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml index 7a6de938b11d..4118aa54bbd5 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml @@ -82,7 +82,7 @@ properties: description: Current at which the headset micbias sense clamp will engage, 0 to disable. - enum: [ 0, 14, 23, 41, 50, 60, 68, 86, 95 ] + enum: [ 0, 14, 24, 43, 52, 61, 71, 90, 99 ] default: 0 cirrus,bias-ramp-ms: diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml index 4b99a18c79a0..b7e605835639 100644 --- a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml @@ -56,6 +56,9 @@ properties: - const: clkext3 minItems: 2 + "#sound-dai-cells": + const: 0 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml index 4f51b2fa82db..c3c989ef2a2c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -26,6 +26,7 @@ properties: - const: rockchip,rk3568-spdif - items: - enum: + - rockchip,rk3128-spdif - rockchip,rk3188-spdif - rockchip,rk3288-spdif - rockchip,rk3308-spdif diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 2f593c7225e5..14cac0e6e0a1 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -23,6 +23,13 @@ properties: - const: fsl,imx51-ecspi - const: fsl,imx53-ecspi - items: + - enum: + - fsl,imx25-cspi + - fsl,imx50-cspi + - fsl,imx51-cspi + - fsl,imx53-cspi + - const: fsl,imx35-cspi + - items: - const: fsl,imx8mp-ecspi - const: fsl,imx6ul-ecspi - items: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index cd58179ae337..430a814f64a5 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -232,7 +232,7 @@ properties: # MEMSIC magnetometer - memsic,mmc35240 # MEMSIC 3-axis accelerometer - - memsic,mx4005 + - memsic,mxc4005 # MEMSIC 2-axis 8-bit digital accelerometer - memsic,mxc6225 # MEMSIC 2-axis 8-bit digital accelerometer diff --git a/Documentation/filesystems/erofs.rst b/Documentation/filesystems/erofs.rst index 4654ee57c1d5..f200d7874495 100644 --- a/Documentation/filesystems/erofs.rst +++ b/Documentation/filesystems/erofs.rst @@ -58,12 +58,14 @@ Here are the main features of EROFS: - Support extended attributes as an option; + - Support a bloom filter that speeds up negative extended attribute lookups; + - Support POSIX.1e ACLs by using extended attributes; - Support transparent data compression as an option: - LZ4 and MicroLZMA algorithms can be used on a per-file basis; In addition, - inplace decompression is also supported to avoid bounce compressed buffers - and page cache thrashing. + LZ4, MicroLZMA and DEFLATE algorithms can be used on a per-file basis; In + addition, inplace decompression is also supported to avoid bounce compressed + buffers and unnecessary page cache thrashing. - Support chunk-based data deduplication and rolling-hash compressed data deduplication; @@ -268,6 +270,38 @@ details.) By the way, chunk-based files are all uncompressed for now. +Long extended attribute name prefixes +------------------------------------- +There are use cases where extended attributes with different values can have +only a few common prefixes (such as overlayfs xattrs). The predefined prefixes +work inefficiently in both image size and runtime performance in such cases. + +The long xattr name prefixes feature is introduced to address this issue. The +overall idea is that, apart from the existing predefined prefixes, the xattr +entry could also refer to user-specified long xattr name prefixes, e.g. +"trusted.overlay.". + +When referring to a long xattr name prefix, the highest bit (bit 7) of +erofs_xattr_entry.e_name_index is set, while the lower bits (bit 0-6) as a whole +represent the index of the referred long name prefix among all long name +prefixes. Therefore, only the trailing part of the name apart from the long +xattr name prefix is stored in erofs_xattr_entry.e_name, which could be empty if +the full xattr name matches exactly as its long xattr name prefix. + +All long xattr prefixes are stored one by one in the packed inode as long as +the packed inode is valid, or in the meta inode otherwise. The +xattr_prefix_count (of the on-disk superblock) indicates the total number of +long xattr name prefixes, while (xattr_prefix_start * 4) indicates the start +offset of long name prefixes in the packed/meta inode. Note that, long extended +attribute name prefixes are disabled if xattr_prefix_count is 0. + +Each long name prefix is stored in the format: ALIGN({__le16 len, data}, 4), +where len represents the total size of the data part. The data part is actually +represented by 'struct erofs_xattr_long_prefix', where base_index represents the +index of the predefined xattr name prefix, e.g. EROFS_XATTR_INDEX_TRUSTED for +"trusted.overlay." long name prefix, while the infix string keeps the string +after stripping the short prefix, e.g. "overlay." for the example above. + Data compression ---------------- EROFS implements fixed-sized output compression which generates fixed-sized diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst index cdefbe73d85c..5b93268e400f 100644 --- a/Documentation/filesystems/overlayfs.rst +++ b/Documentation/filesystems/overlayfs.rst @@ -339,6 +339,18 @@ The specified lower directories will be stacked beginning from the rightmost one and going left. In the above example lower1 will be the top, lower2 the middle and lower3 the bottom layer. +Note: directory names containing colons can be provided as lower layer by +escaping the colons with a single backslash. For example: + + mount -t overlay overlay -olowerdir=/a\:lower\:\:dir /merged + +Since kernel version v6.5, directory names containing colons can also +be provided as lower layer using the fsconfig syscall from new mount api: + + fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/a:lower::dir", 0); + +In the latter case, colons in lower layer directory names will be escaped +as an octal characters (\072) when displayed in /proc/self/mountinfo. Metadata only copy up --------------------- diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst index deac4e973ddc..4d05b9862451 100644 --- a/Documentation/filesystems/porting.rst +++ b/Documentation/filesystems/porting.rst @@ -949,3 +949,99 @@ mmap_lock held. All in-tree users have been audited and do not seem to depend on the mmap_lock being held, but out of tree users should verify for themselves. If they do need it, they can return VM_FAULT_RETRY to be called with the mmap_lock held. + +--- + +**mandatory** + +The order of opening block devices and matching or creating superblocks has +changed. + +The old logic opened block devices first and then tried to find a +suitable superblock to reuse based on the block device pointer. + +The new logic tries to find a suitable superblock first based on the device +number, and opening the block device afterwards. + +Since opening block devices cannot happen under s_umount because of lock +ordering requirements s_umount is now dropped while opening block devices and +reacquired before calling fill_super(). + +In the old logic concurrent mounters would find the superblock on the list of +superblocks for the filesystem type. Since the first opener of the block device +would hold s_umount they would wait until the superblock became either born or +was discarded due to initialization failure. + +Since the new logic drops s_umount concurrent mounters could grab s_umount and +would spin. Instead they are now made to wait using an explicit wait-wake +mechanism without having to hold s_umount. + +--- + +**mandatory** + +The holder of a block device is now the superblock. + +The holder of a block device used to be the file_system_type which wasn't +particularly useful. It wasn't possible to go from block device to owning +superblock without matching on the device pointer stored in the superblock. +This mechanism would only work for a single device so the block layer couldn't +find the owning superblock of any additional devices. + +In the old mechanism reusing or creating a superblock for a racing mount(2) and +umount(2) relied on the file_system_type as the holder. This was severly +underdocumented however: + +(1) Any concurrent mounter that managed to grab an active reference on an + existing superblock was made to wait until the superblock either became + ready or until the superblock was removed from the list of superblocks of + the filesystem type. If the superblock is ready the caller would simple + reuse it. + +(2) If the mounter came after deactivate_locked_super() but before + the superblock had been removed from the list of superblocks of the + filesystem type the mounter would wait until the superblock was shutdown, + reuse the block device and allocate a new superblock. + +(3) If the mounter came after deactivate_locked_super() and after + the superblock had been removed from the list of superblocks of the + filesystem type the mounter would reuse the block device and allocate a new + superblock (the bd_holder point may still be set to the filesystem type). + +Because the holder of the block device was the file_system_type any concurrent +mounter could open the block devices of any superblock of the same +file_system_type without risking seeing EBUSY because the block device was +still in use by another superblock. + +Making the superblock the owner of the block device changes this as the holder +is now a unique superblock and thus block devices associated with it cannot be +reused by concurrent mounters. So a concurrent mounter in (2) could suddenly +see EBUSY when trying to open a block device whose holder was a different +superblock. + +The new logic thus waits until the superblock and the devices are shutdown in +->kill_sb(). Removal of the superblock from the list of superblocks of the +filesystem type is now moved to a later point when the devices are closed: + +(1) Any concurrent mounter managing to grab an active reference on an existing + superblock is made to wait until the superblock is either ready or until + the superblock and all devices are shutdown in ->kill_sb(). If the + superblock is ready the caller will simply reuse it. + +(2) If the mounter comes after deactivate_locked_super() but before + the superblock has been removed from the list of superblocks of the + filesystem type the mounter is made to wait until the superblock and the + devices are shut down in ->kill_sb() and the superblock is removed from the + list of superblocks of the filesystem type. The mounter will allocate a new + superblock and grab ownership of the block device (the bd_holder pointer of + the block device will be set to the newly allocated superblock). + +(3) This case is now collapsed into (2) as the superblock is left on the list + of superblocks of the filesystem type until all devices are shutdown in + ->kill_sb(). In other words, if the superblock isn't on the list of + superblock of the filesystem type anymore then it has given up ownership of + all associated block devices (the bd_holder pointer is NULL). + +As this is a VFS level change it has no practical consequences for filesystems +other than that all of them must use one of the provided kill_litter_super(), +kill_anon_super(), or kill_block_super() helpers. diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 858ed5d80def..0135905c0aa3 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -573,6 +573,32 @@ above, leading to: bool "Support for foo hardware" depends on ARCH_FOO_VENDOR || COMPILE_TEST +Optional dependencies +~~~~~~~~~~~~~~~~~~~~~ + +Some drivers are able to optionally use a feature from another module +or build cleanly with that module disabled, but cause a link failure +when trying to use that loadable module from a built-in driver. + +The most common way to express this optional dependency in Kconfig logic +uses the slightly counterintuitive:: + + config FOO + tristate "Support for foo hardware" + depends on BAR || !BAR + +This means that there is either a dependency on BAR that disallows +the combination of FOO=y with BAR=m, or BAR is completely disabled. +For a more formalized approach if there are multiple drivers that have +the same dependency, a helper symbol can be used, like:: + + config FOO + tristate "Support for foo hardware" + depends on BAR_OPTIONAL + + config BAR_OPTIONAL + def_tristate BAR || !BAR + Kconfig recursive dependency limitations ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml index d1ebcd927149..065661acb878 100644 --- a/Documentation/netlink/specs/devlink.yaml +++ b/Documentation/netlink/specs/devlink.yaml @@ -323,7 +323,7 @@ operations: - dev-name - sb-index reply: &sb-get-reply - value: 11 + value: 13 attributes: *sb-id-attrs dump: request: @@ -350,7 +350,7 @@ operations: - sb-index - sb-pool-index reply: &sb-pool-get-reply - value: 15 + value: 17 attributes: *sb-pool-id-attrs dump: request: @@ -378,7 +378,7 @@ operations: - sb-index - sb-pool-index reply: &sb-port-pool-get-reply - value: 19 + value: 21 attributes: *sb-port-pool-id-attrs dump: request: @@ -407,7 +407,7 @@ operations: - sb-pool-type - sb-tc-index reply: &sb-tc-pool-bind-get-reply - value: 23 + value: 25 attributes: *sb-tc-pool-bind-id-attrs dump: request: @@ -538,7 +538,7 @@ operations: - dev-name - trap-name reply: &trap-get-reply - value: 61 + value: 63 attributes: *trap-id-attrs dump: request: @@ -564,7 +564,7 @@ operations: - dev-name - trap-group-name reply: &trap-group-get-reply - value: 65 + value: 67 attributes: *trap-group-id-attrs dump: request: @@ -590,7 +590,7 @@ operations: - dev-name - trap-policer-id reply: &trap-policer-get-reply - value: 69 + value: 71 attributes: *trap-policer-id-attrs dump: request: @@ -617,7 +617,7 @@ operations: - port-index - rate-node-name reply: &rate-get-reply - value: 74 + value: 76 attributes: *rate-id-attrs dump: request: @@ -643,7 +643,7 @@ operations: - dev-name - linecard-index reply: &linecard-get-reply - value: 78 + value: 80 attributes: *linecard-id-attrs dump: request: diff --git a/Documentation/networking/representors.rst b/Documentation/networking/representors.rst index ee1f5cd54496..decb39c19b9e 100644 --- a/Documentation/networking/representors.rst +++ b/Documentation/networking/representors.rst @@ -162,9 +162,11 @@ How are representors identified? The representor netdevice should *not* directly refer to a PCIe device (e.g. through ``net_dev->dev.parent`` / ``SET_NETDEV_DEV()``), either of the representee or of the switchdev function. -Instead, it should implement the ``ndo_get_devlink_port()`` netdevice op, which -the kernel uses to provide the ``phys_switch_id`` and ``phys_port_name`` sysfs -nodes. (Some legacy drivers implement ``ndo_get_port_parent_id()`` and +Instead, the driver should use the ``SET_NETDEV_DEVLINK_PORT`` macro to +assign a devlink port instance to the netdevice before registering the +netdevice; the kernel uses the devlink port to provide the ``phys_switch_id`` +and ``phys_port_name`` sysfs nodes. +(Some legacy drivers implement ``ndo_get_port_parent_id()`` and ``ndo_get_phys_port_name()`` directly, but this is deprecated.) See :ref:`Documentation/networking/devlink/devlink-port.rst <devlink_port>` for the details of this API. diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst index ac7c52f130c9..31000f075707 100644 --- a/Documentation/process/embargoed-hardware-issues.rst +++ b/Documentation/process/embargoed-hardware-issues.rst @@ -25,15 +25,15 @@ Contact The Linux kernel hardware security team is separate from the regular Linux kernel security team. -The team only handles the coordination of embargoed hardware security -issues. Reports of pure software security bugs in the Linux kernel are not +The team only handles developing fixes for embargoed hardware security +issues. Reports of pure software security bugs in the Linux kernel are not handled by this team and the reporter will be guided to contact the regular Linux kernel security team (:ref:`Documentation/admin-guide/ <securitybugs>`) instead. The team can be contacted by email at <hardware-security@kernel.org>. This -is a private list of security officers who will help you to coordinate an -issue according to our documented process. +is a private list of security officers who will help you to coordinate a +fix according to our documented process. The list is encrypted and email to the list can be sent by either PGP or S/MIME encrypted and must be signed with the reporter's PGP key or S/MIME @@ -132,11 +132,11 @@ other hardware could be affected. The hardware security team will provide an incident-specific encrypted mailing-list which will be used for initial discussion with the reporter, -further disclosure and coordination. +further disclosure, and coordination of fixes. The hardware security team will provide the disclosing party a list of developers (domain experts) who should be informed initially about the -issue after confirming with the developers that they will adhere to this +issue after confirming with the developers that they will adhere to this Memorandum of Understanding and the documented process. These developers form the initial response team and will be responsible for handling the issue after initial contact. The hardware security team is supporting the @@ -209,13 +209,18 @@ five work days this is taken as silent acknowledgement. After acknowledgement or resolution of an objection the expert is disclosed by the incident team and brought into the development process. +List participants may not communicate about the issue outside of the +private mailing list. List participants may not use any shared resources +(e.g. employer build farms, CI systems, etc) when working on patches. + Coordinated release """"""""""""""""""" The involved parties will negotiate the date and time where the embargo ends. At that point the prepared mitigations are integrated into the -relevant kernel trees and published. +relevant kernel trees and published. There is no pre-notification process: +fixes are published in public and available to everyone at the same time. While we understand that hardware security issues need coordinated embargo time, the embargo time should be constrained to the minimum time which is diff --git a/Documentation/rust/general-information.rst b/Documentation/rust/general-information.rst index 49029ee82e55..081397827a7e 100644 --- a/Documentation/rust/general-information.rst +++ b/Documentation/rust/general-information.rst @@ -29,7 +29,7 @@ target with the same invocation used for compilation, e.g.:: To read the docs locally in your web browser, run e.g.:: - xdg-open rust/doc/kernel/index.html + xdg-open Documentation/output/rust/rustdoc/kernel/index.html To learn about how to write the documentation, please see coding-guidelines.rst. diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst index 057db78d4095..03b7f3deb069 100644 --- a/Documentation/tools/rtla/rtla-timerlat-hist.rst +++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst @@ -36,11 +36,11 @@ EXAMPLE In the example below, **rtla timerlat hist** is set to run for *10* minutes, in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat hist** will change the priority of the *timerlat* threads to run under -*SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The +*SCHED_DEADLINE* priority, with a *100us* runtime every *1ms* period. The *1ms* period is also passed to the *timerlat* tracer. Auto-analysis is disabled to reduce overhead :: - [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms --no-aa + [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1000 --no-aa # RTLA timerlat histogram # Time unit is microseconds (us) # Duration: 0 00:10:00 diff --git a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst index 7a895514b537..196f52386aaa 100644 --- a/Documentation/trace/fprobe.rst +++ b/Documentation/trace/fprobe.rst @@ -91,9 +91,9 @@ The prototype of the entry/exit callback function are as follows: .. code-block:: c - int entry_callback(struct fprobe *fp, unsigned long entry_ip, struct pt_regs *regs, void *entry_data); + int entry_callback(struct fprobe *fp, unsigned long entry_ip, unsigned long ret_ip, struct pt_regs *regs, void *entry_data); - void exit_callback(struct fprobe *fp, unsigned long entry_ip, struct pt_regs *regs, void *entry_data); + void exit_callback(struct fprobe *fp, unsigned long entry_ip, unsigned long ret_ip, struct pt_regs *regs, void *entry_data); Note that the @entry_ip is saved at function entry and passed to exit handler. If the entry callback function returns !0, the corresponding exit callback will be cancelled. @@ -108,6 +108,10 @@ If the entry callback function returns !0, the corresponding exit callback will Note that this may not be the actual entry address of the function but the address where the ftrace is instrumented. +@ret_ip + This is the return address that the traced function will return to, + somewhere in the caller. This can be used at both entry and exit. + @regs This is the `pt_regs` data structure at the entry and exit. Note that the instruction pointer of @regs may be different from the @entry_ip diff --git a/Documentation/translations/zh_CN/core-api/workqueue.rst b/Documentation/translations/zh_CN/core-api/workqueue.rst index 6c1b5ec31d75..7fac6f75d078 100644 --- a/Documentation/translations/zh_CN/core-api/workqueue.rst +++ b/Documentation/translations/zh_CN/core-api/workqueue.rst @@ -202,7 +202,7 @@ workqueue将自动创建与属性相匹配的后备工作者池。调节并发 同的排序属性。 在目前的实现中，上述配置只保证了特定NUMA节点内的ST行为。相反， -``alloc_ordered_queue()`` 应该被用来实现全系统的ST行为。 +``alloc_ordered_workqueue()`` 应该被用来实现全系统的ST行为。 执行场景示例 diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index d7ce71e27c33..7025b3751027 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -416,6 +416,13 @@ Reads the general purpose registers from the vcpu. __u64 pc; }; + /* LoongArch */ + struct kvm_regs { + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + unsigned long gpr[32]; + unsigned long pc; + }; + 4.12 KVM_SET_REGS ----------------- @@ -506,7 +513,7 @@ translation mode. ------------------ :Capability: basic -:Architectures: x86, ppc, mips, riscv +:Architectures: x86, ppc, mips, riscv, loongarch :Type: vcpu ioctl :Parameters: struct kvm_interrupt (in) :Returns: 0 on success, negative on failure. @@ -540,7 +547,7 @@ ioctl is useful if the in-kernel PIC is not used. PPC: ^^^^ -Queues an external interrupt to be injected. This ioctl is overleaded +Queues an external interrupt to be injected. This ioctl is overloaded with 3 different irq values: a) KVM_INTERRUPT_SET @@ -592,6 +599,14 @@ b) KVM_INTERRUPT_UNSET This is an asynchronous vcpu ioctl and can be invoked from any thread. +LOONGARCH: +^^^^^^^^^^ + +Queues an external interrupt to be injected into the virtual CPU. A negative +interrupt number dequeues the interrupt. + +This is an asynchronous vcpu ioctl and can be invoked from any thread. + 4.17 KVM_DEBUG_GUEST -------------------- @@ -737,7 +752,7 @@ signal mask. ---------------- :Capability: basic -:Architectures: x86 +:Architectures: x86, loongarch :Type: vcpu ioctl :Parameters: struct kvm_fpu (out) :Returns: 0 on success, -1 on error @@ -746,7 +761,7 @@ Reads the floating point state from the vcpu. :: - /* for KVM_GET_FPU and KVM_SET_FPU */ + /* x86: for KVM_GET_FPU and KVM_SET_FPU */ struct kvm_fpu { __u8 fpr[8][16]; __u16 fcw; @@ -761,12 +776,21 @@ Reads the floating point state from the vcpu. __u32 pad2; }; + /* LoongArch: for KVM_GET_FPU and KVM_SET_FPU */ + struct kvm_fpu { + __u32 fcsr; + __u64 fcc; + struct kvm_fpureg { + __u64 val64[4]; + }fpr[32]; + }; + 4.23 KVM_SET_FPU ---------------- :Capability: basic -:Architectures: x86 +:Architectures: x86, loongarch :Type: vcpu ioctl :Parameters: struct kvm_fpu (in) :Returns: 0 on success, -1 on error @@ -775,7 +799,7 @@ Writes the floating point state to the vcpu. :: - /* for KVM_GET_FPU and KVM_SET_FPU */ + /* x86: for KVM_GET_FPU and KVM_SET_FPU */ struct kvm_fpu { __u8 fpr[8][16]; __u16 fcw; @@ -790,6 +814,15 @@ Writes the floating point state to the vcpu. __u32 pad2; }; + /* LoongArch: for KVM_GET_FPU and KVM_SET_FPU */ + struct kvm_fpu { + __u32 fcsr; + __u64 fcc; + struct kvm_fpureg { + __u64 val64[4]; + }fpr[32]; + }; + 4.24 KVM_CREATE_IRQCHIP ----------------------- @@ -965,7 +998,7 @@ be set in the flags field of this ioctl: The KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag requests KVM to generate the contents of the hypercall page automatically; hypercalls will be intercepted and passed to userspace through KVM_EXIT_XEN. In this -ase, all of the blob size and address fields must be zero. +case, all of the blob size and address fields must be zero. The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates to KVM that userspace will always use the KVM_XEN_HVM_EVTCHN_SEND ioctl to deliver event @@ -1070,7 +1103,7 @@ Other flags returned by ``KVM_GET_CLOCK`` are accepted but ignored. :Extended by: KVM_CAP_INTR_SHADOW :Architectures: x86, arm64 :Type: vcpu ioctl -:Parameters: struct kvm_vcpu_event (out) +:Parameters: struct kvm_vcpu_events (out) :Returns: 0 on success, -1 on error X86: @@ -1193,7 +1226,7 @@ directly to the virtual CPU). :Extended by: KVM_CAP_INTR_SHADOW :Architectures: x86, arm64 :Type: vcpu ioctl -:Parameters: struct kvm_vcpu_event (in) +:Parameters: struct kvm_vcpu_events (in) :Returns: 0 on success, -1 on error X86: @@ -1387,7 +1420,7 @@ documentation when it pops into existence). ------------------- :Capability: KVM_CAP_ENABLE_CAP -:Architectures: mips, ppc, s390, x86 +:Architectures: mips, ppc, s390, x86, loongarch :Type: vcpu ioctl :Parameters: struct kvm_enable_cap (in) :Returns: 0 on success; -1 on error @@ -1442,7 +1475,7 @@ for vm-wide capabilities. --------------------- :Capability: KVM_CAP_MP_STATE -:Architectures: x86, s390, arm64, riscv +:Architectures: x86, s390, arm64, riscv, loongarch :Type: vcpu ioctl :Parameters: struct kvm_mp_state (out) :Returns: 0 on success; -1 on error @@ -1460,7 +1493,7 @@ Possible values are: ========================== =============================================== KVM_MP_STATE_RUNNABLE the vcpu is currently running - [x86,arm64,riscv] + [x86,arm64,riscv,loongarch] KVM_MP_STATE_UNINITIALIZED the vcpu is an application processor (AP) which has not yet received an INIT signal [x86] KVM_MP_STATE_INIT_RECEIVED the vcpu has received an INIT signal, and is @@ -1516,11 +1549,14 @@ For riscv: The only states that are valid are KVM_MP_STATE_STOPPED and KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not. +On LoongArch, only the KVM_MP_STATE_RUNNABLE state is used to reflect +whether the vcpu is runnable. + 4.39 KVM_SET_MP_STATE --------------------- :Capability: KVM_CAP_MP_STATE -:Architectures: x86, s390, arm64, riscv +:Architectures: x86, s390, arm64, riscv, loongarch :Type: vcpu ioctl :Parameters: struct kvm_mp_state (in) :Returns: 0 on success; -1 on error @@ -1538,6 +1574,9 @@ For arm64/riscv: The only states that are valid are KVM_MP_STATE_STOPPED and KVM_MP_STATE_RUNNABLE which reflect if the vcpu should be paused or not. +On LoongArch, only the KVM_MP_STATE_RUNNABLE state is used to reflect +whether the vcpu is runnable. + 4.40 KVM_SET_IDENTITY_MAP_ADDR ------------------------------ @@ -2841,6 +2880,19 @@ Following are the RISC-V D-extension registers: 0x8020 0000 0600 0020 fcsr Floating point control and status register ======================= ========= ============================================= +LoongArch registers are mapped using the lower 32 bits. The upper 16 bits of +that is the register group type. + +LoongArch csr registers are used to control guest cpu or get status of guest +cpu, and they have the following id bit patterns:: + + 0x9030 0000 0001 00 <reg:5> <sel:3> (64-bit) + +LoongArch KVM control registers are used to implement some new defined functions +such as set vcpu counter or reset vcpu, and they have the following id bit patterns:: + + 0x9030 0000 0002 <reg:16> + 4.69 KVM_GET_ONE_REG -------------------- @@ -3063,7 +3115,7 @@ as follow:: }; An entry with a "page_shift" of 0 is unused. Because the array is -organized in increasing order, a lookup can stop when encoutering +organized in increasing order, a lookup can stop when encountering such an entry. The "slb_enc" field provides the encoding to use in the SLB for the @@ -3457,7 +3509,7 @@ Possible features: - KVM_RUN and KVM_GET_REG_LIST are not available; - KVM_GET_ONE_REG and KVM_SET_ONE_REG cannot be used to access - the scalable archietctural SVE registers + the scalable architectural SVE registers KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() or KVM_REG_ARM64_SVE_FFR; @@ -4403,7 +4455,7 @@ This will have undefined effects on the guest if it has not already placed itself in a quiescent state where no vcpu will make MMU enabled memory accesses. -On succsful completion, the pending HPT will become the guest's active +On successful completion, the pending HPT will become the guest's active HPT and the previous HPT will be discarded. On failure, the guest will still be operating on its previous HPT. @@ -5018,7 +5070,7 @@ before the vcpu is fully usable. Between KVM_ARM_VCPU_INIT and KVM_ARM_VCPU_FINALIZE, the feature may be configured by use of ioctls such as KVM_SET_ONE_REG. The exact configuration -that should be performaned and how to do it are feature-dependent. +that should be performed and how to do it are feature-dependent. Other calls that depend on a particular feature being finalized, such as KVM_RUN, KVM_GET_REG_LIST, KVM_GET_ONE_REG and KVM_SET_ONE_REG, will fail with @@ -5126,6 +5178,24 @@ Valid values for 'action':: #define KVM_PMU_EVENT_ALLOW 0 #define KVM_PMU_EVENT_DENY 1 +Via this API, KVM userspace can also control the behavior of the VM's fixed +counters (if any) by configuring the "action" and "fixed_counter_bitmap" fields. + +Specifically, KVM follows the following pseudo-code when determining whether to +allow the guest FixCtr[i] to count its pre-defined fixed event:: + + FixCtr[i]_is_allowed = (action == ALLOW) && (bitmap & BIT(i)) || + (action == DENY) && !(bitmap & BIT(i)); + FixCtr[i]_is_denied = !FixCtr[i]_is_allowed; + +KVM always consumes fixed_counter_bitmap, it's userspace's responsibility to +ensure fixed_counter_bitmap is set correctly, e.g. if userspace wants to define +a filter that only affects general purpose counters. + +Note, the "events" field also applies to fixed counters' hardcoded event_select +and unit_mask values. "fixed_counter_bitmap" has higher priority than "events" +if there is a contradiction between the two. + 4.121 KVM_PPC_SVM_OFF --------------------- @@ -5477,7 +5547,7 @@ KVM_XEN_ATTR_TYPE_EVTCHN from the guest. A given sending port number may be directed back to a specified vCPU (by APIC ID) / port / priority on the guest, or to trigger events on an eventfd. The vCPU and priority can be changed - by setting KVM_XEN_EVTCHN_UPDATE in a subsequent call, but but other + by setting KVM_XEN_EVTCHN_UPDATE in a subsequent call, but other fields cannot change for a given sending port. A port mapping is removed by using KVM_XEN_EVTCHN_DEASSIGN in the flags field. Passing KVM_XEN_EVTCHN_RESET in the flags field removes all interception of diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst index d47595b33fcf..2b3b6d442302 100644 --- a/Documentation/virt/kvm/x86/mmu.rst +++ b/Documentation/virt/kvm/x86/mmu.rst @@ -202,10 +202,22 @@ Shadow pages contain the following information: Is 1 if the MMU instance cannot use A/D bits. EPT did not have A/D bits before Haswell; shadow EPT page tables also cannot use A/D bits if the L1 hypervisor does not enable them. + role.guest_mode: + Indicates the shadow page is created for a nested guest. role.passthrough: The page is not backed by a guest page table, but its first entry points to one. This is set if NPT uses 5-level page tables (host CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=0). + mmu_valid_gen: + The MMU generation of this page, used to fast zap of all MMU pages within a + VM without blocking vCPUs too long. Specifically, KVM updates the per-VM + valid MMU generation which causes the mismatch of mmu_valid_gen for each mmu + page. This makes all existing MMU pages obsolete. Obsolete pages can't be + used. Therefore, vCPUs must load a new, valid root before re-entering the + guest. The MMU generation is only ever '0' or '1'. Note, the TDP MMU doesn't + use this field as non-root TDP MMU pages are reachable only from their + owning root. Thus it suffices for TDP MMU to use role.invalid in root pages + to invalidate all MMU pages. gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. @@ -219,21 +231,30 @@ Shadow pages contain the following information: at __pa(sp2->spt). sp2 will point back at sp1 through parent_pte. The spt array forms a DAG structure with the shadow page as a node, and guest pages as leaves. - gfns: - An array of 512 guest frame numbers, one for each present pte. Used to - perform a reverse map from a pte to a gfn. When role.direct is set, any - element of this array can be calculated from the gfn field when used, in - this case, the array of gfns is not allocated. See role.direct and gfn. - root_count: - A counter keeping track of how many hardware registers (guest cr3 or - pdptrs) are now pointing at the page. While this counter is nonzero, the - page cannot be destroyed. See role.invalid. + shadowed_translation: + An array of 512 shadow translation entries, one for each present pte. Used + to perform a reverse map from a pte to a gfn as well as its access + permission. When role.direct is set, the shadow_translation array is not + allocated. This is because the gfn contained in any element of this array + can be calculated from the gfn field when used. In addition, when + role.direct is set, KVM does not track access permission for each of the + gfn. See role.direct and gfn. + root_count / tdp_mmu_root_count: + root_count is a reference counter for root shadow pages in Shadow MMU. + vCPUs elevate the refcount when getting a shadow page that will be used as + a root page, i.e. page that will be loaded into hardware directly (CR3, + PDPTRs, nCR3 EPTP). Root pages cannot be destroyed while their refcount is + non-zero. See role.invalid. tdp_mmu_root_count is similar but exclusively + used in TDP MMU as an atomic refcount. parent_ptes: The reverse mapping for the pte/ptes pointing at this page's spt. If parent_ptes bit 0 is zero, only one spte points at this page and parent_ptes points at this single spte, otherwise, there exists multiple sptes pointing at this page and (parent_ptes & ~0x1) points at a data structure with a list of parent sptes. + ptep: + The kernel virtual address of the SPTE that points at this shadow page. + Used exclusively by the TDP MMU, this field is a union with parent_ptes. unsync: If true, then the translations in this page may not match the guest's translation. This is equivalent to the state of the tlb when a pte is @@ -261,6 +282,10 @@ Shadow pages contain the following information: since the last time the page table was actually used; if emulation is triggered too frequently on this page, KVM will unmap the page to avoid emulation in the future. + tdp_mmu_page: + Is 1 if the shadow page is a TDP MMU page. This variable is used to + bifurcate the control flows for KVM when walking any data structure that + may contain pages from both TDP MMU and shadow MMU. Reverse map =========== |