diff options
Diffstat (limited to 'Documentation/driver-api/thermal')
| -rw-r--r-- | Documentation/driver-api/thermal/sysfs-api.rst | 133 |
1 files changed, 34 insertions, 99 deletions
diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst index 6c1175c6afba..c803b89b7248 100644 --- a/Documentation/driver-api/thermal/sysfs-api.rst +++ b/Documentation/driver-api/thermal/sysfs-api.rst @@ -4,8 +4,6 @@ Generic Thermal Sysfs driver How To Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com> -Updated: 2 January 2008 - Copyright (c) 2008 Intel Corporation @@ -38,61 +36,57 @@ temperature) and throttle appropriate devices. :: - struct thermal_zone_device - *thermal_zone_device_register(char *type, - int trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops, - const struct thermal_zone_params *tzp, - int passive_delay, int polling_delay)) + struct thermal_zone_device * + thermal_zone_device_register_with_trips(const char *type, + const struct thermal_trip *trips, + int num_trips, void *devdata, + const struct thermal_zone_device_ops *ops, + const struct thermal_zone_params *tzp, + unsigned int passive_delay, + unsigned int polling_delay) - This interface function adds a new thermal zone device (sensor) to + This interface function adds a new thermal zone device (sensor) to the /sys/class/thermal folder as `thermal_zone[0-*]`. It tries to bind all the - thermal cooling devices registered at the same time. + thermal cooling devices registered to it at the same time. type: the thermal zone type. trips: - the total number of trip points this thermal zone supports. - mask: - Bit string: If 'n'th bit is set, then trip point 'n' is writable. + the table of trip points for this thermal zone. devdata: device private data ops: thermal zone device call-backs. - .bind: - bind the thermal zone device with a thermal cooling device. - .unbind: - unbind the thermal zone device with a thermal cooling device. + .should_bind: + check whether or not a given cooling device should be bound to + a given trip point in this thermal zone. .get_temp: get the current temperature of the thermal zone. .set_trips: - set the trip points window. Whenever the current temperature - is updated, the trip points immediately below and above the - current temperature are found. - .get_mode: - get the current mode (enabled/disabled) of the thermal zone. - - - "enabled" means the kernel thermal management is - enabled. - - "disabled" will prevent kernel thermal driver action - upon trip points so that user applications can take - charge of thermal management. - .set_mode: - set the mode (enabled/disabled) of the thermal zone. - .get_trip_type: - get the type of certain trip point. - .get_trip_temp: - get the temperature above which the certain trip point - will be fired. + set the trip points window. Whenever the current temperature + is updated, the trip points immediately below and above the + current temperature are found. + .change_mode: + change the mode (enabled/disabled) of the thermal zone. + .set_trip_temp: + set the temperature of a given trip point. + .get_crit_temp: + get the critical temperature for this thermal zone. .set_emul_temp: - set the emulation temperature which helps in debugging - different threshold temperature points. + set the emulation temperature which helps in debugging + different threshold temperature points. + .get_trend: + get the trend of most recent zone temperature changes. + .hot: + hot trip point crossing handler. + .critical: + critical trip point crossing handler. tzp: thermal zone platform parameters. passive_delay: - number of milliseconds to wait between polls when - performing passive cooling. + number of milliseconds to wait between polls when performing passive + cooling. polling_delay: number of milliseconds to wait between polls when checking whether trip points have been crossed (0 for interrupt driven systems). @@ -251,56 +245,6 @@ temperature) and throttle appropriate devices. It deletes the corresponding entry from /sys/class/thermal folder and unbinds itself from all the thermal zone devices using it. -1.3 interface for binding a thermal zone device with a thermal cooling device ------------------------------------------------------------------------------ - - :: - - int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev, - unsigned long upper, unsigned long lower, unsigned int weight); - - This interface function binds a thermal cooling device to a particular trip - point of a thermal zone device. - - This function is usually called in the thermal zone device .bind callback. - - tz: - the thermal zone device - cdev: - thermal cooling device - trip: - indicates which trip point in this thermal zone the cooling device - is associated with. - upper: - the Maximum cooling state for this trip point. - THERMAL_NO_LIMIT means no upper limit, - and the cooling device can be in max_state. - lower: - the Minimum cooling state can be used for this trip point. - THERMAL_NO_LIMIT means no lower limit, - and the cooling device can be in cooling state 0. - weight: - the influence of this cooling device in this thermal - zone. See 1.4.1 below for more information. - - :: - - int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); - - This interface function unbinds a thermal cooling device from a particular - trip point of a thermal zone device. This function is usually called in - the thermal zone device .unbind callback. - - tz: - the thermal zone device - cdev: - thermal cooling device - trip: - indicates which trip point in this thermal zone the cooling device - is associated with. - 1.4 Thermal Zone Parameters --------------------------- @@ -371,8 +315,6 @@ Thermal cooling device sys I/F, created once it's registered:: Then next two dynamic attributes are created/removed in pairs. They represent the relationship between a thermal zone and its associated cooling device. -They are created/removed for each successful execution of -thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device. :: @@ -464,14 +406,7 @@ are supposed to implement the callback. If they don't, the thermal framework calculated the trend by comparing the previous and the current temperature values. -4.2. get_thermal_instance -------------------------- - -This function returns the thermal_instance corresponding to a given -{thermal_zone, cooling_device, trip_point} combination. Returns NULL -if such an instance does not exist. - -4.3. thermal_cdev_update +4.2. thermal_cdev_update ------------------------ This function serves as an arbitrator to set the state of a cooling |