1 files changed, 0 insertions, 131 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
deleted file mode 100644
index 1382b64e1381..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-Qualcomm WCNSS Binding
-
-This binding describes the Qualcomm WCNSS hardware. It consists of control
-block and a BT, WiFi and FM radio block, all using SMD as command channels.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be: "qcom,wcnss",
-
-- qcom,smd-channel:
-	Usage: required
-	Value type: <string>
-	Definition: standard SMD property specifying the SMD channel used for
-		    communication with the WiFi firmware.
-		    Should be "WCNSS_CTRL".
-
-- qcom,mmio:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to a node specifying the wcnss "ccu" and "dxe"
-		    register blocks. The node must be compatible with one of
-		    the following:
-		    "qcom,riva",
-		    "qcom,pronto"
-
-- firmware-name:
-	Usage: optional
-	Value type: <string>
-	Definition: specifies the relative firmware image path for the WLAN NV
-		    blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
-		    not specified.
-
-= SUBNODES
-The subnodes of the wcnss node are optional and describe the individual blocks in
-the WCNSS.
-
-== Bluetooth
-The following properties are defined to the bluetooth node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,wcnss-bt"
-
-- local-bd-address:
-	Usage: optional
-	Value type: <u8 array>
-	Definition: see Documentation/devicetree/bindings/net/bluetooth.txt
-
-== WiFi
-The following properties are defined to the WiFi node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,wcnss-wlan",
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the "rx" and "tx" interrupts
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "rx" and "tx"
-
-- qcom,smem-state:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should reference the tx-enable and tx-rings-empty SMEM states
-
-- qcom,smem-state-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "tx-enable" and "tx-rings-empty"
-
-= EXAMPLE
-The following example represents a SMD node, with one edge representing the
-"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
-described; as found on the 8974 platform.
-
-smd {
-	compatible = "qcom,smd";
-
-	pronto-edge {
-		interrupts = <0 142 1>;
-
-		qcom,ipc = <&apcs 8 17>;
-		qcom,smd-edge = <6>;
-
-		wcnss {
-			compatible = "qcom,wcnss";
-			qcom,smd-channels = "WCNSS_CTRL";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcom,mmio = <&pronto>;
-
-			bt {
-				compatible = "qcom,wcnss-bt";
-
-				/* BD address 00:11:22:33:44:55 */
-				local-bd-address = [ 55 44 33 22 11 00 ];
-			};
-
-			wlan {
-				compatible = "qcom,wcnss-wlan";
-
-				interrupts = <0 145 0>, <0 146 0>;
-				interrupt-names = "tx", "rx";
-
-				qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>;
-				qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-			};
-		};
-	};
-};
-
-soc {
-	pronto: pronto {
-		compatible = "qcom,pronto";
-
-		reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
-		reg-names = "ccu", "dxe", "pmu";
-	};
-};