diff options
Diffstat (limited to 'Documentation/devicetree/bindings/reset')
5 files changed, 116 insertions, 106 deletions
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml new file mode 100644 index 000000000000..88aebb370838 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom MISC block PCIe reset controller + +description: This document describes reset controller handling PCIe PERST# + signals. On BCM4908 it's a part of the MISC block. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + const: brcm,bcm4908-misc-pcie-reset + + reg: + maxItems: 1 + + "#reset-cells": + description: PCIe core id + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@ff802644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0xff802644 0x04>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt deleted file mode 100644 index 2df4bddeb688..000000000000 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt +++ /dev/null @@ -1,44 +0,0 @@ -Hisilicon System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -The reset controller registers are part of the system-ctl block on -hi3660 and hi3670 SoCs. - -Required properties: -- compatible: should be one of the following: - "hisilicon,hi3660-reset" for HI3660 - "hisilicon,hi3670-reset", "hisilicon,hi3660-reset" for HI3670 -- hisi,rst-syscon: phandle of the reset's syscon. -- #reset-cells : Specifies the number of cells needed to encode a - reset source. The type shall be a <u32> and the value shall be 2. - - Cell #1 : offset of the reset assert control - register from the syscon register base - offset + 4: deassert control register - offset + 8: status control register - Cell #2 : bit position of the reset in the reset control register - -Example: - iomcu: iomcu@ffd7e000 { - compatible = "hisilicon,hi3660-iomcu", "syscon"; - reg = <0x0 0xffd7e000 0x0 0x1000>; - }; - - iomcu_rst: iomcu_rst_controller { - compatible = "hisilicon,hi3660-reset"; - hisi,rst-syscon = <&iomcu>; - #reset-cells = <2>; - }; - -Specifying reset lines connected to IP modules -============================================== -example: - - i2c0: i2c@..... { - ... - resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */ - ... - }; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml new file mode 100644 index 000000000000..9bf40952e5b7 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/hisilicon,hi3660-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon System Reset Controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + Please also refer to reset.txt in this directory for common reset + controller binding usage. + The reset controller registers are part of the system-ctl block on + hi3660 and hi3670 SoCs. + +properties: + compatible: + oneOf: + - items: + - const: hisilicon,hi3660-reset + - items: + - const: hisilicon,hi3670-reset + - const: hisilicon,hi3660-reset + + hisilicon,rst-syscon: + description: phandle of the reset's syscon. + $ref: /schemas/types.yaml#/definitions/phandle + + '#reset-cells': + description: | + Specifies the number of cells needed to encode a reset source. + Cell #1 : offset of the reset assert control register from the syscon + register base + offset + 4: deassert control register + offset + 8: status control register + Cell #2 : bit position of the reset in the reset control register + const: 2 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/hi3660-clock.h> + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0xffd7e000 0x1000>; + }; + + iomcu_rst: iomcu_rst_controller { + compatible = "hisilicon,hi3660-reset"; + hisilicon,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + /* Specifying reset lines connected to IP modules */ + i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0xffd71000 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; +... diff --git a/Documentation/devicetree/bindings/reset/sirf,rstc.txt b/Documentation/devicetree/bindings/reset/sirf,rstc.txt deleted file mode 100644 index 0505de742d30..000000000000 --- a/Documentation/devicetree/bindings/reset/sirf,rstc.txt +++ /dev/null @@ -1,42 +0,0 @@ -CSR SiRFSoC Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc" -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below - -example: - -rstc: reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -The reset controller(rstc) manages various reset sources. This module provides -reset signals for most blocks in system. Those device nodes should specify the -reset line on the rstc in their resets property, containing a phandle to the -rstc device node and a RESET_INDEX specifying which module to reset, as described -in reset.txt. - -For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers. -For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose -rest_bit is in SW_RST1, its RESET_INDEX is 32~63. - -example: - -vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - clocks = <&clks 35>; - resets = <&rstc 6>; -}; diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt deleted file mode 100644 index b015508f9780..000000000000 --- a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -ZTE zx2967 SoCs Reset Controller -======================================= - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: should be one of the following. - * zte,zx296718-reset -- reg: physical base address of the controller and length of memory mapped - region. -- #reset-cells: must be 1. - -example: - - reset: reset-controller@1461060 { - compatible = "zte,zx296718-reset"; - reg = <0x01461060 0x8>; - #reset-cells = <1>; - }; |