diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt | 64 |
1 files changed, 0 insertions, 64 deletions
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt deleted file mode 100644 index 4e85fc495e87..000000000000 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Socionext AVE ethernet controller - -This describes the devicetree bindings for AVE ethernet controller -implemented on Socionext UniPhier SoCs. - -Required properties: - - compatible: Should be - - "socionext,uniphier-pro4-ave4" : for Pro4 SoC - - "socionext,uniphier-pxs2-ave4" : for PXs2 SoC - - "socionext,uniphier-ld11-ave4" : for LD11 SoC - - "socionext,uniphier-ld20-ave4" : for LD20 SoC - - "socionext,uniphier-pxs3-ave4" : for PXs3 SoC - - reg: Address where registers are mapped and size of region. - - interrupts: Should contain the MAC interrupt. - - phy-mode: See ethernet.txt in the same directory. Allow to choose - "rgmii", "rmii", "mii", or "internal" according to the PHY. - The acceptable mode is SoC-dependent. - - phy-handle: Should point to the external phy device. - See ethernet.txt file in the same directory. - - clocks: A phandle to the clock for the MAC. - For Pro4 SoC, that is "socionext,uniphier-pro4-ave4", - another MAC clock, GIO bus clock and PHY clock are also required. - - clock-names: Should contain - - "ether", "ether-gb", "gio", "ether-phy" for Pro4 SoC - - "ether" for others - - resets: A phandle to the reset control for the MAC. For Pro4 SoC, - GIO bus reset is also required. - - reset-names: Should contain - - "ether", "gio" for Pro4 SoC - - "ether" for others - - socionext,syscon-phy-mode: A phandle to syscon with one argument - that configures phy mode. The argument is the ID of MAC instance. - -The MAC address will be determined using the optional properties -defined in ethernet.txt. - -Required subnode: - - mdio: A container for child nodes representing phy nodes. - See phy.txt in the same directory. - -Example: - - ether: ethernet@65000000 { - compatible = "socionext,uniphier-ld20-ave4"; - reg = <0x65000000 0x8500>; - interrupts = <0 66 4>; - phy-mode = "rgmii"; - phy-handle = <ðphy>; - clock-names = "ether"; - clocks = <&sys_clk 6>; - reset-names = "ether"; - resets = <&sys_rst 6>; - socionext,syscon-phy-mode = <&soc_glue 0>; - local-mac-address = [00 00 00 00 00 00]; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethphy@1 { - reg = <1>; - }; - }; - }; |