diff options
Diffstat (limited to 'Documentation/arch/x86')
| -rw-r--r-- | Documentation/arch/x86/amd-memory-encryption.rst | 16 | ||||
| -rw-r--r-- | Documentation/arch/x86/mds.rst | 38 | ||||
| -rw-r--r-- | Documentation/arch/x86/topology.rst | 24 | ||||
| -rw-r--r-- | Documentation/arch/x86/x86_64/fred.rst | 96 | ||||
| -rw-r--r-- | Documentation/arch/x86/x86_64/index.rst | 1 |
5 files changed, 141 insertions, 34 deletions
diff --git a/Documentation/arch/x86/amd-memory-encryption.rst b/Documentation/arch/x86/amd-memory-encryption.rst index 07caa8fff852..414bc7402ae7 100644 --- a/Documentation/arch/x86/amd-memory-encryption.rst +++ b/Documentation/arch/x86/amd-memory-encryption.rst @@ -87,14 +87,14 @@ The state of SME in the Linux kernel can be documented as follows: kernel is non-zero). SME can also be enabled and activated in the BIOS. If SME is enabled and -activated in the BIOS, then all memory accesses will be encrypted and it will -not be necessary to activate the Linux memory encryption support. If the BIOS -merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate -memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or -by supplying mem_encrypt=on on the kernel command line. However, if BIOS does -not enable SME, then Linux will not be able to activate memory encryption, even -if configured to do so by default or the mem_encrypt=on command line parameter -is specified. +activated in the BIOS, then all memory accesses will be encrypted and it +will not be necessary to activate the Linux memory encryption support. + +If the BIOS merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), +then memory encryption can be enabled by supplying mem_encrypt=on on the +kernel command line. However, if BIOS does not enable SME, then Linux +will not be able to activate memory encryption, even if configured to do +so by default or the mem_encrypt=on command line parameter is specified. Secure Nested Paging (SNP) ========================== diff --git a/Documentation/arch/x86/mds.rst b/Documentation/arch/x86/mds.rst index e73fdff62c0a..c58c72362911 100644 --- a/Documentation/arch/x86/mds.rst +++ b/Documentation/arch/x86/mds.rst @@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing: mds_clear_cpu_buffers() +Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path. +Other than CFLAGS.ZF, this macro doesn't clobber any registers. + The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state (idle) transitions. @@ -138,17 +141,30 @@ Mitigation points When transitioning from kernel to user space the CPU buffers are flushed on affected CPUs when the mitigation is not disabled on the kernel - command line. The migitation is enabled through the static key - mds_user_clear. - - The mitigation is invoked in prepare_exit_to_usermode() which covers - all but one of the kernel to user space transitions. The exception - is when we return from a Non Maskable Interrupt (NMI), which is - handled directly in do_nmi(). - - (The reason that NMI is special is that prepare_exit_to_usermode() can - enable IRQs. In NMI context, NMIs are blocked, and we don't want to - enable IRQs with NMIs blocked.) + command line. The mitigation is enabled through the feature flag + X86_FEATURE_CLEAR_CPU_BUF. + + The mitigation is invoked just before transitioning to userspace after + user registers are restored. This is done to minimize the window in + which kernel data could be accessed after VERW e.g. via an NMI after + VERW. + + **Corner case not handled** + Interrupts returning to kernel don't clear CPUs buffers since the + exit-to-user path is expected to do that anyways. But, there could be + a case when an NMI is generated in kernel after the exit-to-user path + has cleared the buffers. This case is not handled and NMI returning to + kernel don't clear CPU buffers because: + + 1. It is rare to get an NMI after VERW, but before returning to userspace. + 2. For an unprivileged user, there is no known way to make that NMI + less rare or target it. + 3. It would take a large number of these precisely-timed NMIs to mount + an actual attack. There's presumably not enough bandwidth. + 4. The NMI in question occurs after a VERW, i.e. when user state is + restored and most interesting data is already scrubbed. Whats left + is only the data that NMI touches, and that may or may not be of + any interest. 2. C-State transition diff --git a/Documentation/arch/x86/topology.rst b/Documentation/arch/x86/topology.rst index 08ebf9edbfc1..7352ab89a55a 100644 --- a/Documentation/arch/x86/topology.rst +++ b/Documentation/arch/x86/topology.rst @@ -47,17 +47,21 @@ AMD nomenclature for package is 'Node'. Package-related topology information in the kernel: - - cpuinfo_x86.x86_max_cores: + - topology_num_threads_per_package() - The number of cores in a package. This information is retrieved via CPUID. + The number of threads in a package. - - cpuinfo_x86.x86_max_dies: + - topology_num_cores_per_package() - The number of dies in a package. This information is retrieved via CPUID. + The number of cores in a package. + + - topology_max_dies_per_package() + + The maximum number of dies in a package. - cpuinfo_x86.topo.die_id: - The physical ID of the die. This information is retrieved via CPUID. + The physical ID of the die. - cpuinfo_x86.topo.pkg_id: @@ -96,16 +100,6 @@ are SMT- or CMT-type threads. AMDs nomenclature for a CMT core is "Compute Unit". The kernel always uses "core". -Core-related topology information in the kernel: - - - smp_num_siblings: - - The number of threads in a core. The number of threads in a package can be - calculated by:: - - threads_per_package = cpuinfo_x86.x86_max_cores * smp_num_siblings - - Threads ======= A thread is a single scheduling unit. It's the equivalent to a logical Linux diff --git a/Documentation/arch/x86/x86_64/fred.rst b/Documentation/arch/x86/x86_64/fred.rst new file mode 100644 index 000000000000..9f57e7b91f7e --- /dev/null +++ b/Documentation/arch/x86/x86_64/fred.rst @@ -0,0 +1,96 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================= +Flexible Return and Event Delivery (FRED) +========================================= + +Overview +======== + +The FRED architecture defines simple new transitions that change +privilege level (ring transitions). The FRED architecture was +designed with the following goals: + +1) Improve overall performance and response time by replacing event + delivery through the interrupt descriptor table (IDT event + delivery) and event return by the IRET instruction with lower + latency transitions. + +2) Improve software robustness by ensuring that event delivery + establishes the full supervisor context and that event return + establishes the full user context. + +The new transitions defined by the FRED architecture are FRED event +delivery and, for returning from events, two FRED return instructions. +FRED event delivery can effect a transition from ring 3 to ring 0, but +it is used also to deliver events incident to ring 0. One FRED +instruction (ERETU) effects a return from ring 0 to ring 3, while the +other (ERETS) returns while remaining in ring 0. Collectively, FRED +event delivery and the FRED return instructions are FRED transitions. + +In addition to these transitions, the FRED architecture defines a new +instruction (LKGS) for managing the state of the GS segment register. +The LKGS instruction can be used by 64-bit operating systems that do +not use the new FRED transitions. + +Furthermore, the FRED architecture is easy to extend for future CPU +architectures. + +Software based event dispatching +================================ + +FRED operates differently from IDT in terms of event handling. Instead +of directly dispatching an event to its handler based on the event +vector, FRED requires the software to dispatch an event to its handler +based on both the event's type and vector. Therefore, an event dispatch +framework must be implemented to facilitate the event-to-handler +dispatch process. The FRED event dispatch framework takes control +once an event is delivered, and employs a two-level dispatch. + +The first level dispatching is event type based, and the second level +dispatching is event vector based. + +Full supervisor/user context +============================ + +FRED event delivery atomically save and restore full supervisor/user +context upon event delivery and return. Thus it avoids the problem of +transient states due to %cr2 and/or %dr6, and it is no longer needed +to handle all the ugly corner cases caused by half baked entry states. + +FRED allows explicit unblock of NMI with new event return instructions +ERETS/ERETU, avoiding the mess caused by IRET which unconditionally +unblocks NMI, e.g., when an exception happens during NMI handling. + +FRED always restores the full value of %rsp, thus ESPFIX is no longer +needed when FRED is enabled. + +LKGS +==== + +LKGS behaves like the MOV to GS instruction except that it loads the +base address into the IA32_KERNEL_GS_BASE MSR instead of the GS +segment’s descriptor cache. With LKGS, it ends up with avoiding +mucking with kernel GS, i.e., an operating system can always operate +with its own GS base address. + +Because FRED event delivery from ring 3 and ERETU both swap the value +of the GS base address and that of the IA32_KERNEL_GS_BASE MSR, plus +the introduction of LKGS instruction, the SWAPGS instruction is no +longer needed when FRED is enabled, thus is disallowed (#UD). + +Stack levels +============ + +4 stack levels 0~3 are introduced to replace the nonreentrant IST for +event handling, and each stack level should be configured to use a +dedicated stack. + +The current stack level could be unchanged or go higher upon FRED +event delivery. If unchanged, the CPU keeps using the current event +stack. If higher, the CPU switches to a new event stack specified by +the MSR of the new stack level, i.e., MSR_IA32_FRED_RSP[123]. + +Only execution of a FRED return instruction ERET[US], could lower the +current stack level, causing the CPU to switch back to the stack it was +on before a previous event delivery that promoted the stack level. diff --git a/Documentation/arch/x86/x86_64/index.rst b/Documentation/arch/x86/x86_64/index.rst index a56070fc8e77..ad15e9bd623f 100644 --- a/Documentation/arch/x86/x86_64/index.rst +++ b/Documentation/arch/x86/x86_64/index.rst @@ -15,3 +15,4 @@ x86_64 Support cpu-hotplug-spec machinecheck fsgs + fred |