diff options
Diffstat (limited to 'Documentation/admin-guide')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 53 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/hns3-pmu.rst | 136 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/cpuidle.rst | 15 |
4 files changed, 198 insertions, 7 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2522b11e593f..5e9147fe8968 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -400,6 +400,12 @@ arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension support + arm64.nosve [ARM64] Unconditionally disable Scalable Vector + Extension support + + arm64.nosme [ARM64] Unconditionally disable Scalable Matrix + Extension support + ataflop= [HW,M68k] atarimouse= [HW,MOUSE] Atari Mouse @@ -3161,7 +3167,7 @@ improves system performance, but it may also expose users to several CPU vulnerabilities. Equivalent to: nopti [X86,PPC] - kpti=0 [ARM64] + if nokaslr then kpti=0 [ARM64] nospectre_v1 [X86,PPC] nobp=0 [S390] nospectre_v2 [X86,PPC,S390,ARM64] @@ -3176,6 +3182,7 @@ no_entry_flush [PPC] no_uaccess_flush [PPC] mmio_stale_data=off [X86] + retbleed=off [X86] Exceptions: This does not have any effect on @@ -3198,6 +3205,7 @@ mds=full,nosmt [X86] tsx_async_abort=full,nosmt [X86] mmio_stale_data=full,nosmt [X86] + retbleed=auto,nosmt [X86] mminit_loglevel= [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this @@ -5197,6 +5205,30 @@ retain_initrd [RAM] Keep initrd memory after extraction + retbleed= [X86] Control mitigation of RETBleed (Arbitrary + Speculative Code Execution with Return Instructions) + vulnerability. + + off - no mitigation + auto - automatically select a migitation + auto,nosmt - automatically select a mitigation, + disabling SMT if necessary for + the full mitigation (only on Zen1 + and older without STIBP). + ibpb - mitigate short speculation windows on + basic block boundaries too. Safe, highest + perf impact. + unret - force enable untrained return thunks, + only effective on AMD f15h-f17h + based systems. + unret,nosmt - like unret, will disable SMT when STIBP + is not available. + + Selecting 'auto' will choose a mitigation method at run + time according to the CPU. + + Not specifying this option is equivalent to retbleed=auto. + rfkill.default_state= 0 "airplane mode". All wifi, bluetooth, wimax, gps, fm, etc. communication is blocked by default. @@ -5568,6 +5600,7 @@ eibrs - enhanced IBRS eibrs,retpoline - enhanced IBRS + Retpolines eibrs,lfence - enhanced IBRS + LFENCE + ibrs - use IBRS to protect kernel Not specifying this option is equivalent to spectre_v2=auto. @@ -5771,6 +5804,24 @@ expediting. Set to zero to disable automatic expediting. + srcutree.srcu_max_nodelay [KNL] + Specifies the number of no-delay instances + per jiffy for which the SRCU grace period + worker thread will be rescheduled with zero + delay. Beyond this limit, worker thread will + be rescheduled with a sleep delay of one jiffy. + + srcutree.srcu_max_nodelay_phase [KNL] + Specifies the per-grace-period phase, number of + non-sleeping polls of readers. Beyond this limit, + grace period worker thread will be rescheduled + with a sleep delay of one jiffy, between each + rescan of the readers, for a grace period phase. + + srcutree.srcu_retry_check_delay [KNL] + Specifies number of microseconds of non-sleeping + delay between each non-sleeping poll of readers. + srcutree.small_contention_lim [KNL] Specifies the number of update-side contention events per jiffy will be tolerated before diff --git a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst new file mode 100644 index 000000000000..578407e487d6 --- /dev/null +++ b/Documentation/admin-guide/perf/hns3-pmu.rst @@ -0,0 +1,136 @@ +====================================== +HNS3 Performance Monitoring Unit (PMU) +====================================== + +HNS3(HiSilicon network system 3) Performance Monitoring Unit (PMU) is an +End Point device to collect performance statistics of HiSilicon SoC NIC. +On Hip09, each SICL(Super I/O cluster) has one PMU device. + +HNS3 PMU supports collection of performance statistics such as bandwidth, +latency, packet rate and interrupt rate. + +Each HNS3 PMU supports 8 hardware events. + +HNS3 PMU driver +=============== + +The HNS3 PMU driver registers a perf PMU with the name of its sicl id.:: + + /sys/devices/hns3_pmu_sicl_<sicl_id> + +PMU driver provides description of available events, filter modes, format, +identifier and cpumask in sysfs. + +The "events" directory describes the event code of all supported events +shown in perf list. + +The "filtermode" directory describes the supported filter modes of each +event. + +The "format" directory describes all formats of the config (events) and +config1 (filter options) fields of the perf_event_attr structure. + +The "identifier" file shows version of PMU hardware device. + +The "bdf_min" and "bdf_max" files show the supported bdf range of each +pmu device. + +The "hw_clk_freq" file shows the hardware clock frequency of each pmu +device. + +Example usage of checking event code and subevent code:: + + $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time + config=0x00204 + $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num + config=0x10204 + +Each performance statistic has a pair of events to get two values to +calculate real performance data in userspace. + +The bits 0~15 of config (here 0x0204) are the true hardware event code. If +two events have same value of bits 0~15 of config, that means they are +event pair. And the bit 16 of config indicates getting counter 0 or +counter 1 of hardware event. + +After getting two values of event pair in usersapce, the formula of +computation to calculate real performance data is::: + + counter 0 / counter 1 + +Example usage of checking supported filter mode:: + + $# cat /sys/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num + filter mode supported: global/port/port-tc/func/func-queue/ + +Example usage of perf:: + + $# perf list + hns3_pmu_sicl_0/bw_ssu_rpu_byte_num/ [kernel PMU event] + hns3_pmu_sicl_0/bw_ssu_rpu_time/ [kernel PMU event] + ------------------------------------------ + + $# perf stat -g -e hns3_pmu_sicl_0/bw_ssu_rpu_byte_num,global=1/ -e hns3_pmu_sicl_0/bw_ssu_rpu_time,global=1/ -I 1000 + or + $# perf stat -g -e hns3_pmu_sicl_0/config=0x00002,global=1/ -e hns3_pmu_sicl_0/config=0x10002,global=1/ -I 1000 + + +Filter modes +-------------- + +1. global mode +PMU collect performance statistics for all HNS3 PCIe functions of IO DIE. +Set the "global" filter option to 1 will enable this mode. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,global=1/ -I 1000 + +2. port mode +PMU collect performance statistic of one whole physical port. The port id +is same as mac id. The "tc" filter option must be set to 0xF in this mode, +here tc stands for traffic class. + +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0xF/ -I 1000 + +3. port-tc mode +PMU collect performance statistic of one tc of physical port. The port id +is same as mac id. The "tc" filter option must be set to 0 ~ 7 in this +mode. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0/ -I 1000 + +4. func mode +PMU collect performance statistic of one PF/VF. The function id is BDF of +PF/VF, its conversion formula:: + + func = (bus << 8) + (device << 3) + (function) + +for example: + BDF func + 35:00.0 0x3500 + 35:00.1 0x3501 + 35:01.0 0x3508 + +In this mode, the "queue" filter option must be set to 0xFFFF. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0xFFFF/ -I 1000 + +5. func-queue mode +PMU collect performance statistic of one queue of PF/VF. The function id +is BDF of PF/VF, the "queue" filter option must be set to the exact queue +id of function. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0/ -I 1000 + +6. func-intr mode +PMU collect performance statistic of one interrupt of PF/VF. The function +id is BDF of PF/VF, the "intr" filter option must be set to the exact +interrupt id of function. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x00301,bdf=0x3500,intr=0/ -I 1000 diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index 69b23f087c05..9c9ece88ce53 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -9,6 +9,7 @@ Performance monitor support hisi-pmu hisi-pcie-pmu + hns3-pmu imx-ddr qcom_l2_pmu qcom_l3_pmu diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst index aec2cd2aaea7..19754beb5a4e 100644 --- a/Documentation/admin-guide/pm/cpuidle.rst +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -612,8 +612,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor by default this way, for example. The other kernel command line parameters controlling CPU idle time management -described below are only relevant for the *x86* architecture and some of -them affect Intel processors only. +described below are only relevant for the *x86* architecture and references +to ``intel_idle`` affect Intel processors only. The *x86* architecture support code recognizes three kernel command line options related to CPU idle time management: ``idle=poll``, ``idle=halt``, @@ -635,10 +635,13 @@ idle, so it very well may hurt single-thread computations performance as well as energy-efficiency. Thus using it for performance reasons may not be a good idea at all.] -The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes -``acpi_idle`` to be used (as long as all of the information needed by it is -there in the system's ACPI tables), but it is not allowed to use the -``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states. +The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of +the CPU to enter idle states. When this option is used, the ``acpi_idle`` +driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems +running Intel processors, this option disables the ``intel_idle`` driver +and forces the use of the ``acpi_idle`` driver instead. Note that in either +case, ``acpi_idle`` driver will function only if all the information needed +by it is in the system's ACPI tables. In addition to the architecture-level kernel command line options affecting CPU idle time management, there are parameters affecting individual ``CPUIdle`` |