diff options
Diffstat (limited to 'Documentation/admin-guide/perf')
| -rw-r--r-- | Documentation/admin-guide/perf/arm-ni.rst | 17 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/dwc_pcie_pmu.rst | 16 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/hisi-pcie-pmu.rst | 4 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/index.rst | 1 |
4 files changed, 29 insertions, 9 deletions
diff --git a/Documentation/admin-guide/perf/arm-ni.rst b/Documentation/admin-guide/perf/arm-ni.rst new file mode 100644 index 000000000000..d26a8f697c36 --- /dev/null +++ b/Documentation/admin-guide/perf/arm-ni.rst @@ -0,0 +1,17 @@ +==================================== +Arm Network-on Chip Interconnect PMU +==================================== + +NI-700 and friends implement a distinct PMU for each clock domain within the +interconnect. Correspondingly, the driver exposes multiple PMU devices named +arm_ni_<x>_cd_<y>, where <x> is an (arbitrary) instance identifier and <y> is +the clock domain ID within that particular instance. If multiple NI instances +exist within a system, the PMU devices can be correlated with the underlying +hardware instance via sysfs parentage. + +Each PMU exposes base event aliases for the interface types present in its clock +domain. These require qualifying with the "eventid" and "nodeid" parameters +to specify the event code to count and the interface at which to count it +(per the configured hardware ID as reflected in the xxNI_NODE_INFO register). +The exception is the "cycles" alias for the PMU cycle counter, which is encoded +with the PMU node type and needs no further qualification. diff --git a/Documentation/admin-guide/perf/dwc_pcie_pmu.rst b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst index d47cd229d710..39b8e1fdd0cd 100644 --- a/Documentation/admin-guide/perf/dwc_pcie_pmu.rst +++ b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst @@ -46,16 +46,16 @@ Some of the events only exist for specific configurations. DesignWare Cores (DWC) PCIe PMU Driver ======================================= -This driver adds PMU devices for each PCIe Root Port named based on the BDF of +This driver adds PMU devices for each PCIe Root Port named based on the SBDF of the Root Port. For example, - 30:03.0 PCI bridge: Device 1ded:8000 (rev 01) + 0001:30:03.0 PCI bridge: Device 1ded:8000 (rev 01) -the PMU device name for this Root Port is dwc_rootport_3018. +the PMU device name for this Root Port is dwc_rootport_13018. The DWC PCIe PMU driver registers a perf PMU driver, which provides description of available events and configuration options in sysfs, see -/sys/bus/event_source/devices/dwc_rootport_{bdf}. +/sys/bus/event_source/devices/dwc_rootport_{sbdf}. The "format" directory describes format of the config fields of the perf_event_attr structure. The "events" directory provides configuration @@ -66,16 +66,16 @@ The "perf list" command shall list the available events from sysfs, e.g.:: $# perf list | grep dwc_rootport <...> - dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/ [Kernel PMU event] + dwc_rootport_13018/Rx_PCIe_TLP_Data_Payload/ [Kernel PMU event] <...> - dwc_rootport_3018/rx_memory_read,lane=?/ [Kernel PMU event] + dwc_rootport_13018/rx_memory_read,lane=?/ [Kernel PMU event] Time Based Analysis Event Usage ------------------------------- Example usage of counting PCIe RX TLP data payload (Units of bytes):: - $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/ + $# perf stat -a -e dwc_rootport_13018/Rx_PCIe_TLP_Data_Payload/ The average RX/TX bandwidth can be calculated using the following formula: @@ -88,7 +88,7 @@ Lane Event Usage Each lane has the same event set and to avoid generating a list of hundreds of events, the user need to specify the lane ID explicitly, e.g.:: - $# perf stat -a -e dwc_rootport_3018/rx_memory_read,lane=4/ + $# perf stat -a -e dwc_rootport_13018/rx_memory_read,lane=4/ The driver does not support sampling, therefore "perf record" will not work. Per-task (without "-a") perf sessions are not supported. diff --git a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst index 5541ff40e06a..083ca50de896 100644 --- a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst +++ b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst @@ -28,7 +28,9 @@ The "identifier" sysfs file allows users to identify the version of the PMU hardware device. The "bus" sysfs file allows users to get the bus number of Root Ports -monitored by PMU. +monitored by PMU. Furthermore users can get the Root Ports range in +[bdf_min, bdf_max] from "bdf_min" and "bdf_max" sysfs attributes +respectively. Example usage of perf:: diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index 7eb3dcd6f4da..8502bc174640 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -16,6 +16,7 @@ Performance monitor support starfive_starlink_pmu arm-ccn arm-cmn + arm-ni xgene-pmu arm_dsu_pmu thunderx2-pmu |