diff options
23 files changed, 1565 insertions, 84 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 000000000000..480e66422625 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt new file mode 100644 index 000000000000..4494613ae7ad --- /dev/null +++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt @@ -0,0 +1,28 @@ +STMicroelectronics STPMIC1 Onkey + +Required properties: + +- compatible = "st,stpmic1-onkey"; +- interrupts: interrupt line to use +- interrupt-names = "onkey-falling", "onkey-rising" + onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic + onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic + +Optional properties: + +- st,onkey-clear-cc-flag: onkey is able power on after an + over-current shutdown event. +- st,onkey-pu-inactive: onkey pull up is not active +- power-off-time-sec: Duration in seconds which the key should be kept + pressed for device to power off automatically (from 1 to 16 seconds). + see See Documentation/devicetree/bindings/input/keys.txt + +Example: + +onkey { + compatible = "st,stpmic1-onkey"; + interrupt-parent = <&pmic>; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index 127baa31a77a..c549924603d2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -5,39 +5,105 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 -> - 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6 - -> 144 clocks), recommended is 4. -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external - reference) -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 - samples, 3 -> 8 samples) -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 -> - 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended - is 3 -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 - -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2 -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of - the fractional part) recommended is 7 -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35 - mA max, 1 -> 50 mA typical 80 mA max) +- st,ave-ctrl : Sample average control + 0 -> 1 sample + 1 -> 2 samples + 2 -> 4 samples + 3 -> 8 samples +- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) + 0 -> 10 us + 1 -> 50 us + 2 -> 100 us + 3 -> 500 us + 4 -> 1 ms + 5 -> 5 ms + 6 -> 10 ms + 7 -> 50 ms +- st,settling : Panel driver settling time (recommended is 2) + 0 -> 10 us + 1 -> 100 us + 2 -> 500 us + 3 -> 1 ms + 4 -> 5 ms + 5 -> 10 ms + 6 -> 50 ms + 7 -> 100 ms +- st,fraction-z : Length of the fractional part in z (recommended is 7) + (fraction-z ([0..7]) = Count of the fractional part) +- st,i-drive : current limit value of the touchscreen drivers + 0 -> 20 mA (typical 35mA max) + 1 -> 50 mA (typical 80 mA max) + +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks + 1 -> 44 clocks + 2 -> 56 clocks + 3 -> 64 clocks + 4 -> 80 clocks (recommended) + 5 -> 96 clocks + 6 -> 124 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC + 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal + 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz + 1 -> 3.25 MHz + 2 || 3 -> 6.5 MHz Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen (child) will take precedence +over the settings done in MFD. + Example: +stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + /* Common ADC settings */ + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; + reg = <0>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 7 length fractional part in z */ st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ st,i-drive = <1>; }; + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt new file mode 100644 index 000000000000..afd45c089585 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt @@ -0,0 +1,61 @@ +* STMicroelectronics STPMIC1 Power Management IC + +Required properties: +- compatible: : "st,stpmic1" +- reg: : The I2C slave address for the STPMIC1 chip. +- interrupts: : The interrupt line the device is connected to. +- #interrupt-cells: : Should be 1. +- interrupt-controller: : Marks the device node as an interrupt controller. + Interrupt numbers are defined at + dt-bindings/mfd/st,stpmic1.h. + +STPMIC1 consists in a varied group of sub-devices. +Each sub-device binding is be described in own documentation file. + +Device Description +------ ------------ +st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt +st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt +st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt + +Example: + +#include <dt-bindings/mfd/st,stpmic1.h> + +pmic: pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + vdd_core: buck1 { + regulator-name = "vdd_core"; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index c797c05cd3c2..d4408a417193 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio, keypad, touchscreen, adc, pwm, rotator. Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" + - reg : I2C/SPI address of the device Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ + - interrupts : The interrupt outputs from the controller + - interrupt-controller : Marks the device node as an interrupt controller + - wakeup-source : Marks the input device as wakable + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ + +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Example: diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt new file mode 100644 index 000000000000..7cc1407f15cb --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt @@ -0,0 +1,11 @@ +STMicroelectronics STPMIC1 Watchdog + +Required properties: + +- compatible : should be "st,stpmic1-wdt" + +Example: + +watchdog { + compatible = "st,stpmic1-wdt"; +}; diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 7a3ca4ec0cb7..5b72e2963153 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -755,6 +755,13 @@ config STM32_DFSDM_ADC This driver can also be built as a module. If so, the module will be called stm32-dfsdm-adc. +config STMPE_ADC + tristate "STMicroelectronics STMPE ADC driver" + depends on OF && MFD_STMPE + help + Say yes here to build support for ST Microelectronics STMPE + built-in ADC block (stmpe811). + config STX104 tristate "Apex Embedded Systems STX104 driver" depends on PC104 && X86 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 07df37f621bd..6d4e3149ac15 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o +obj-$(CONFIG_STMPE_ADC) += stmpe-adc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c new file mode 100644 index 000000000000..37f4b74a5d32 --- /dev/null +++ b/drivers/iio/adc/stmpe-adc.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STMPE811 IIO ADC Driver + * + * 4 channel, 10/12-bit ADC + * + * Copyright (C) 2013-2018 Toradex AG <stefan.agner@toradex.com> + */ + +#include <linux/completion.h> +#include <linux/err.h> +#include <linux/iio/iio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/stmpe.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/device.h> + +#define STMPE_REG_INT_STA 0x0B +#define STMPE_REG_ADC_INT_EN 0x0E +#define STMPE_REG_ADC_INT_STA 0x0F + +#define STMPE_REG_ADC_CTRL1 0x20 +#define STMPE_REG_ADC_CTRL2 0x21 +#define STMPE_REG_ADC_CAPT 0x22 +#define STMPE_REG_ADC_DATA_CH(channel) (0x30 + 2 * (channel)) + +#define STMPE_REG_TEMP_CTRL 0x60 +#define STMPE_TEMP_CTRL_ENABLE BIT(0) +#define STMPE_TEMP_CTRL_ACQ BIT(1) +#define STMPE_TEMP_CTRL_THRES_EN BIT(3) +#define STMPE_START_ONE_TEMP_CONV (STMPE_TEMP_CTRL_ENABLE | \ + STMPE_TEMP_CTRL_ACQ | \ + STMPE_TEMP_CTRL_THRES_EN) +#define STMPE_REG_TEMP_DATA 0x61 +#define STMPE_REG_TEMP_TH 0x63 +#define STMPE_ADC_LAST_NR 7 +#define STMPE_TEMP_CHANNEL (STMPE_ADC_LAST_NR + 1) + +#define STMPE_ADC_CH(channel) ((1 << (channel)) & 0xff) + +#define STMPE_ADC_TIMEOUT msecs_to_jiffies(1000) + +struct stmpe_adc { + struct stmpe *stmpe; + struct clk *clk; + struct device *dev; + struct mutex lock; + + /* We are allocating plus one for the temperature channel */ + struct iio_chan_spec stmpe_adc_iio_channels[STMPE_ADC_LAST_NR + 2]; + + struct completion completion; + + u8 channel; + u32 value; +}; + +static int stmpe_read_voltage(struct stmpe_adc *info, + struct iio_chan_spec const *chan, int *val) +{ + long ret; + + mutex_lock(&info->lock); + + info->channel = (u8)chan->channel; + + if (info->channel > STMPE_ADC_LAST_NR) { + mutex_unlock(&info->lock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, + STMPE_ADC_CH(info->channel)); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT, + STMPE_ADC_CH(info->channel)); + + *val = info->value; + + ret = wait_for_completion_interruptible_timeout + (&info->completion, STMPE_ADC_TIMEOUT); + + if (ret <= 0) { + mutex_unlock(&info->lock); + if (ret == 0) + return -ETIMEDOUT; + else + return ret; + } + + *val = info->value; + + mutex_unlock(&info->lock); + + return 0; +} + +static int stmpe_read_temp(struct stmpe_adc *info, + struct iio_chan_spec const *chan, int *val) +{ + long ret; + + mutex_lock(&info->lock); + + info->channel = (u8)chan->channel; + + if (info->channel != STMPE_TEMP_CHANNEL) { + mutex_unlock(&info->lock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL, + STMPE_START_ONE_TEMP_CONV); + + ret = wait_for_completion_interruptible_timeout + (&info->completion, STMPE_ADC_TIMEOUT); + + if (ret <= 0) { + mutex_unlock(&info->lock); + if (ret == 0) + return -ETIMEDOUT; + else + return ret; + } + + /* + * absolute temp = +V3.3 * value /7.51 [K] + * scale to [milli °C] + */ + *val = ((449960l * info->value) / 1024l) - 273150; + + mutex_unlock(&info->lock); + + return 0; +} + +static int stmpe_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct stmpe_adc *info = iio_priv(indio_dev); + long ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + + switch (chan->type) { + case IIO_VOLTAGE: + ret = stmpe_read_voltage(info, chan, val); + break; + + case IIO_TEMP: + ret = stmpe_read_temp(info, chan, val); + break; + default: + return -EINVAL; + } + + if (ret < 0) + return ret; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 3300; + *val2 = info->stmpe->mod_12b ? 12 : 10; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + break; + } + + return -EINVAL; +} + +static irqreturn_t stmpe_adc_isr(int irq, void *dev_id) +{ + struct stmpe_adc *info = (struct stmpe_adc *)dev_id; + u16 data; + + if (info->channel > STMPE_TEMP_CHANNEL) + return IRQ_NONE; + + if (info->channel <= STMPE_ADC_LAST_NR) { + int int_sta; + + int_sta = stmpe_reg_read(info->stmpe, STMPE_REG_ADC_INT_STA); + + /* Is the interrupt relevant */ + if (!(int_sta & STMPE_ADC_CH(info->channel))) + return IRQ_NONE; + + /* Read value */ + stmpe_block_read(info->stmpe, + STMPE_REG_ADC_DATA_CH(info->channel), 2, (u8 *) &data); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, int_sta); + } else if (info->channel == STMPE_TEMP_CHANNEL) { + /* Read value */ + stmpe_block_read(info->stmpe, STMPE_REG_TEMP_DATA, 2, + (u8 *) &data); + } + + info->value = (u32) be16_to_cpu(data); + complete(&info->completion); + + return IRQ_HANDLED; +} + +static const struct iio_info stmpe_adc_iio_info = { + .read_raw = &stmpe_read_raw, +}; + +static void stmpe_adc_voltage_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_VOLTAGE; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + ics->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); + ics->indexed = 1; + ics->channel = chan; +} + +static void stmpe_adc_temp_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_TEMP; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED); + ics->indexed = 1; + ics->channel = chan; +} + +static int stmpe_adc_init_hw(struct stmpe_adc *adc) +{ + int ret; + struct stmpe *stmpe = adc->stmpe; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_ADC); + if (ret) { + dev_err(stmpe->dev, "Could not enable clock for ADC\n"); + return ret; + } + + ret = stmpe811_adc_common_init(stmpe); + if (ret) { + stmpe_disable(stmpe, STMPE_BLOCK_ADC); + return ret; + } + + /* use temp irq for each conversion completion */ + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH, 0); + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH + 1, 0); + + return 0; +} + +static int stmpe_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct stmpe_adc *info; + struct device_node *np; + u32 norequest_mask = 0; + int irq_temp, irq_adc; + int num_chan = 0; + int i = 0; + int ret; + + irq_adc = platform_get_irq_byname(pdev, "STMPE_ADC"); + if (irq_adc < 0) + return irq_adc; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct stmpe_adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + mutex_init(&info->lock); + + init_completion(&info->completion); + ret = devm_request_threaded_irq(&pdev->dev, irq_adc, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) { + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", + irq_adc); + return ret; + } + + irq_temp = platform_get_irq_byname(pdev, "STMPE_TEMP_SENS"); + if (irq_temp >= 0) { + ret = devm_request_threaded_irq(&pdev->dev, irq_temp, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) + dev_warn(&pdev->dev, "failed requesting irq for" + " temp sensor, irq = %d\n", irq_temp); + } + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &stmpe_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + info->stmpe = dev_get_drvdata(pdev->dev.parent); + + np = pdev->dev.of_node; + + if (!np) + dev_err(&pdev->dev, "no device tree node found\n"); + + of_property_read_u32(np, "st,norequest-mask", &norequest_mask); + + for_each_clear_bit(i, (unsigned long *) &norequest_mask, + (STMPE_ADC_LAST_NR + 1)) { + stmpe_adc_voltage_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + } + stmpe_adc_temp_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + indio_dev->channels = info->stmpe_adc_iio_channels; + indio_dev->num_channels = num_chan; + + ret = stmpe_adc_init_hw(info); + if (ret) + return ret; + + return devm_iio_device_register(&pdev->dev, indio_dev); +} + +static int __maybe_unused stmpe_adc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct stmpe_adc *info = iio_priv(indio_dev); + + stmpe_adc_init_hw(info); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume); + +static struct platform_driver stmpe_adc_driver = { + .probe = stmpe_adc_probe, + .driver = { + .name = "stmpe-adc", + .pm = &stmpe_adc_pm_ops, + }, +}; + +module_platform_driver(stmpe_adc_driver); + +MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>"); +MODULE_DESCRIPTION("STMPEXXX ADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:stmpe-adc"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index ca59a2be9bc5..279fb02a0f14 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA To compile this driver as a module, choose M here. The module will be called sc27xx_vibra. +config INPUT_STPMIC1_ONKEY + tristate "STPMIC1 PMIC Onkey support" + depends on MFD_STPMIC1 + help + Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey + can be used to wakeup from low power modes and force a shut-down on + long press. + + To compile this driver as a module, choose M here: the + module will be called stpmic1_onkey. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 9d0f9d1ff68f..1b44202ad8f7 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o +obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o @@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o + diff --git a/drivers/input/misc/stpmic1_onkey.c b/drivers/input/misc/stpmic1_onkey.c new file mode 100644 index 000000000000..7b49c9997df7 --- /dev/null +++ b/drivers/input/misc/stpmic1_onkey.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics. + +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mfd/stpmic1.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> + +/** + * struct stpmic1_onkey - OnKey data + * @input_dev: pointer to input device + * @irq_falling: irq that we are hooked on to + * @irq_rising: irq that we are hooked on to + */ +struct stpmic1_onkey { + struct input_dev *input_dev; + int irq_falling; + int irq_rising; +}; + +static irqreturn_t onkey_falling_irq(int irq, void *ponkey) +{ + struct stpmic1_onkey *onkey = ponkey; + struct input_dev *input_dev = onkey->input_dev; + + input_report_key(input_dev, KEY_POWER, 1); + pm_wakeup_event(input_dev->dev.parent, 0); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +static irqreturn_t onkey_rising_irq(int irq, void *ponkey) +{ + struct stpmic1_onkey *onkey = ponkey; + struct input_dev *input_dev = onkey->input_dev; + + input_report_key(input_dev, KEY_POWER, 0); + pm_wakeup_event(input_dev->dev.parent, 0); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +static int stpmic1_onkey_probe(struct platform_device *pdev) +{ + struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct input_dev *input_dev; + struct stpmic1_onkey *onkey; + unsigned int val, reg = 0; + int error; + + onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL); + if (!onkey) + return -ENOMEM; + + onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling"); + if (onkey->irq_falling < 0) { + dev_err(dev, "failed: request IRQ onkey-falling %d\n", + onkey->irq_falling); + return onkey->irq_falling; + } + + onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising"); + if (onkey->irq_rising < 0) { + dev_err(dev, "failed: request IRQ onkey-rising %d\n", + onkey->irq_rising); + return onkey->irq_rising; + } + + if (!device_property_read_u32(dev, "power-off-time-sec", &val)) { + if (val > 0 && val <= 16) { + dev_dbg(dev, "power-off-time=%d seconds\n", val); + reg |= PONKEY_PWR_OFF; + reg |= ((16 - val) & PONKEY_TURNOFF_TIMER_MASK); + } else { + dev_err(dev, "power-off-time-sec out of range\n"); + return -EINVAL; + } + } + + if (device_property_present(dev, "st,onkey-clear-cc-flag")) + reg |= PONKEY_CC_FLAG_CLEAR; + + error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR, + PONKEY_TURNOFF_MASK, reg); + if (error) { + dev_err(dev, "PKEY_TURNOFF_CR write failed: %d\n", error); + return error; + } + + if (device_property_present(dev, "st,onkey-pu-inactive")) { + error = regmap_update_bits(pmic->regmap, PADS_PULL_CR, + PONKEY_PU_INACTIVE, + PONKEY_PU_INACTIVE); + if (error) { + dev_err(dev, "ONKEY Pads configuration failed: %d\n", + error); + return error; + } + } + + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "Can't allocate Pwr Onkey Input Device\n"); + return -ENOMEM; + } + + input_dev->name = "pmic_onkey"; + input_dev->phys = "pmic_onkey/input0"; + + input_set_capability(input_dev, EV_KEY, KEY_POWER); + + onkey->input_dev = input_dev; + + /* interrupt is nested in a thread */ + error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL, + onkey_falling_irq, IRQF_ONESHOT, + dev_name(dev), onkey); + if (error) { + dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL, + onkey_rising_irq, IRQF_ONESHOT, + dev_name(dev), onkey); + if (error) { + dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "Can't register power button: %d\n", error); + return error; + } + + platform_set_drvdata(pdev, onkey); + device_init_wakeup(dev, true); + + return 0; +} + +static int __maybe_unused stpmic1_onkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct stpmic1_onkey *onkey = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) { + enable_irq_wake(onkey->irq_falling); + enable_irq_wake(onkey->irq_rising); + } + return 0; +} + +static int __maybe_unused stpmic1_onkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct stpmic1_onkey *onkey = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) { + disable_irq_wake(onkey->irq_falling); + disable_irq_wake(onkey->irq_rising); + } + return 0; +} + +static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm, + stpmic1_onkey_suspend, + stpmic1_onkey_resume); + +static const struct of_device_id of_stpmic1_onkey_match[] = { + { .compatible = "st,stpmic1-onkey" }, + { }, +}; + +MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match); + +static struct platform_driver stpmic1_onkey_driver = { + .probe = stpmic1_onkey_probe, + .driver = { + .name = "stpmic1_onkey", + .of_match_table = of_match_ptr(of_stpmic1_onkey_match), + .pm = &stpmic1_onkey_pm, + }, +}; +module_platform_driver(stpmic1_onkey_driver); + +MODULE_DESCRIPTION("Onkey driver for STPMIC1"); +MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 2a78e27b4495..cf9c9aa39f6e 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -30,8 +30,6 @@ * with touchscreen controller */ #define STMPE_REG_INT_STA 0x0B -#define STMPE_REG_ADC_CTRL1 0x20 -#define STMPE_REG_ADC_CTRL2 0x21 #define STMPE_REG_TSC_CTRL 0x40 #define STMPE_REG_TSC_CFG 0x41 #define STMPE_REG_FIFO_TH 0x4A @@ -49,17 +47,6 @@ #define STMPE_IRQ_TOUCH_DET 0 -#define SAMPLE_TIME(x) ((x & 0xf) << 4) -#define MOD_12B(x) ((x & 0x1) << 3) -#define REF_SEL(x) ((x & 0x1) << 1) -#define ADC_FREQ(x) (x & 0x3) -#define AVE_CTRL(x) ((x & 0x3) << 6) -#define DET_DELAY(x) ((x & 0x7) << 3) -#define SETTLING(x) (x & 0x7) -#define FRACTION_Z(x) (x & 0x7) -#define I_DRIVE(x) (x & 0x1) -#define OP_MODE(x) ((x & 0x7) << 1) - #define STMPE_TS_NAME "stmpe-ts" #define XY_MASK 0xfff @@ -69,15 +56,6 @@ * @idev: registered input device * @work: a work item used to scan the device * @dev: a pointer back to the MFD cell struct device* - * @sample_time: ADC converstion time in number of clock. - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), - * recommended is 4. - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) - * @ref_sel: ADC reference source - * (0 -> internal reference, 1 -> external reference) - * @adc_freq: ADC Clock speed - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) * @ave_ctrl: Sample average control * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) * @touch_det_delay: Touch detect interrupt delay @@ -99,10 +77,6 @@ struct stmpe_touch { struct input_dev *idev; struct delayed_work work; struct device *dev; - u8 sample_time; - u8 mod_12b; - u8 ref_sel; - u8 adc_freq; u8 ave_ctrl; u8 touch_det_delay; u8 settling; @@ -203,7 +177,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) static int stmpe_init_hw(struct stmpe_touch *ts) { int ret; - u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask; + u8 tsc_cfg, tsc_cfg_mask; struct stmpe *stmpe = ts->stmpe; struct device *dev = ts->dev; @@ -213,27 +187,17 @@ static int stmpe_init_hw(struct stmpe_touch *ts) return ret; } - adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) | - REF_SEL(ts->ref_sel); - adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff); - - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1, - adc_ctrl1_mask, adc_ctrl1); - if (ret) { - dev_err(dev, "Could not setup ADC\n"); - return ret; - } - - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2, - ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq)); + ret = stmpe811_adc_common_init(stmpe); if (ret) { - dev_err(dev, "Could not setup ADC\n"); + stmpe_disable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC); return ret; } - tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) | - SETTLING(ts->settling); - tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff); + tsc_cfg = STMPE_AVE_CTRL(ts->ave_ctrl) | + STMPE_DET_DELAY(ts->touch_det_delay) | + STMPE_SETTLING(ts->settling); + tsc_cfg_mask = STMPE_AVE_CTRL(0xff) | STMPE_DET_DELAY(0xff) | + STMPE_SETTLING(0xff); ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg); if (ret) { @@ -242,14 +206,14 @@ static int stmpe_init_hw(struct stmpe_touch *ts) } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z, - FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z)); + STMPE_FRACTION_Z(0xff), STMPE_FRACTION_Z(ts->fraction_z)); if (ret) { dev_err(dev, "Could not config touch\n"); return ret; } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE, - I_DRIVE(0xff), I_DRIVE(ts->i_drive)); + STMPE_I_DRIVE(0xff), STMPE_I_DRIVE(ts->i_drive)); if (ret) { dev_err(dev, "Could not config touch\n"); return ret; @@ -263,7 +227,7 @@ static int stmpe_init_hw(struct stmpe_touch *ts) } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL, - OP_MODE(0xff), OP_MODE(OP_MOD_XYZ)); + STMPE_OP_MODE(0xff), STMPE_OP_MODE(OP_MOD_XYZ)); if (ret) { dev_err(dev, "Could not set mode\n"); return ret; @@ -303,13 +267,13 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev, if (np) { if (!of_property_read_u32(np, "st,sample-time", &val)) - ts->sample_time = val; + ts->stmpe->sample_time = val; if (!of_property_read_u32(np, "st,mod-12b", &val)) - ts->mod_12b = val; + ts->stmpe->mod_12b = val; if (!of_property_read_u32(np, "st,ref-sel", &val)) - ts->ref_sel = val; + ts->stmpe->ref_sel = val; if (!of_property_read_u32(np, "st,adc-freq", &val)) - ts->adc_freq = val; + ts->stmpe->adc_freq = val; if (!of_property_read_u32(np, "st,ave-ctrl", &val)) ts->ave_ctrl = val; if (!of_property_read_u32(np, "st,touch-det-delay", &val)) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2acc105e43cc..211da115d3f6 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1204,7 +1204,7 @@ config MFD_STMPE Currently supported devices are: - STMPE811: GPIO, Touchscreen + STMPE811: GPIO, Touchscreen, ADC STMPE1601: GPIO, Keypad STMPE1801: GPIO, Keypad STMPE2401: GPIO, Keypad @@ -1217,6 +1217,7 @@ config MFD_STMPE GPIO: stmpe-gpio Keypad: stmpe-keypad Touchscreen: stmpe-ts + ADC: stmpe-adc menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE @@ -1871,6 +1872,22 @@ config MFD_STM32_TIMERS for PWM and IIO Timer. This driver allow to share the registers between the others drivers. +config MFD_STPMIC1 + tristate "Support for STPMIC1 PMIC" + depends on (I2C=y && OF) + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on + key, watchdog and regulator functionalities which are supported via + the relevant subsystems. This driver provides core support for the + STPMIC1. In order to use the actual functionaltiy of the device other + drivers must be enabled. + + To compile this driver as a module, choose M here: the + module will be called stpmic1. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 12980a4ad460..a62fb0112d9f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -233,6 +233,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o +obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 7569a4be0608..f2acb1f6a29c 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -464,6 +464,28 @@ static const struct mfd_cell stmpe_ts_cell = { }; /* + * ADC (STMPE811) + */ + +static struct resource stmpe_adc_resources[] = { + { + .name = "STMPE_TEMP_SENS", + .flags = IORESOURCE_IRQ, + }, + { + .name = "STMPE_ADC", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_adc_cell = { + .name = "stmpe-adc", + .of_compatible = "st,stmpe-adc", + .resources = stmpe_adc_resources, + .num_resources = ARRAY_SIZE(stmpe_adc_resources), +}; + +/* * STMPE811 or STMPE610 */ @@ -497,6 +519,11 @@ static struct stmpe_variant_block stmpe811_blocks[] = { .irq = STMPE811_IRQ_TOUCH_DET, .block = STMPE_BLOCK_TOUCHSCREEN, }, + { + .cell = &stmpe_adc_cell, + .irq = STMPE811_IRQ_TEMP_SENS, + .block = STMPE_BLOCK_ADC, + }, }; static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, @@ -517,6 +544,35 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, enable ? 0 : mask); } +int stmpe811_adc_common_init(struct stmpe *stmpe) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask; + + adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) | + STMPE_MOD_12B(stmpe->mod_12b) | + STMPE_REF_SEL(stmpe->ref_sel); + adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) | + STMPE_REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2, + STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq)); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(stmpe811_adc_common_init); + static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) { /* 0 for touchscreen, 1 for GPIO */ @@ -1325,6 +1381,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) struct device_node *np = ci->dev->of_node; struct stmpe *stmpe; int ret; + u32 val; pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -1342,6 +1399,15 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) mutex_init(&stmpe->irq_lock); mutex_init(&stmpe->lock); + if (!of_property_read_u32(np, "st,sample-time", &val)) + stmpe->sample_time = val; + if (!of_property_read_u32(np, "st,mod-12b", &val)) + stmpe->mod_12b = val; + if (!of_property_read_u32(np, "st,ref-sel", &val)) + stmpe->ref_sel = val; + if (!of_property_read_u32(np, "st,adc-freq", &val)) + stmpe->adc_freq = val; + stmpe->dev = ci->dev; stmpe->client = ci->client; stmpe->pdata = pdata; @@ -1433,6 +1499,8 @@ int stmpe_remove(struct stmpe *stmpe) if (!IS_ERR(stmpe->vcc)) regulator_disable(stmpe->vcc); + __stmpe_disable(stmpe, STMPE_BLOCK_ADC); + mfd_remove_devices(stmpe->dev); return 0; diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c new file mode 100644 index 000000000000..7dfbe8906cb8 --- /dev/null +++ b/drivers/mfd/stpmic1.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet <p.paillet@st.com> + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/mfd/stpmic1.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/pm_wakeirq.h> +#include <linux/regmap.h> + +#include <dt-bindings/mfd/st,stpmic1.h> + +#define STPMIC1_MAIN_IRQ 0 + +static const struct regmap_range stpmic1_readable_ranges[] = { + regmap_reg_range(TURN_ON_SR, VERSION_SR), + regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR), + regmap_reg_range(BST_SW_CR, BST_SW_CR), + regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4), + regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4), + regmap_reg_range(INT_MASK_R1, INT_MASK_R4), + regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4), + regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4), + regmap_reg_range(INT_SRC_R1, INT_SRC_R1), +}; + +static const struct regmap_range stpmic1_writeable_ranges[] = { + regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR), + regmap_reg_range(BST_SW_CR, BST_SW_CR), + regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4), + regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4), + regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4), +}; + +static const struct regmap_range stpmic1_volatile_ranges[] = { + regmap_reg_range(TURN_ON_SR, VERSION_SR), + regmap_reg_range(WCHDG_CR, WCHDG_CR), + regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4), + regmap_reg_range(INT_SRC_R1, INT_SRC_R4), +}; + +static const struct regmap_access_table stpmic1_readable_table = { + .yes_ranges = stpmic1_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(stpmic1_readable_ranges), +}; + +static const struct regmap_access_table stpmic1_writeable_table = { + .yes_ranges = stpmic1_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(stpmic1_writeable_ranges), +}; + +static const struct regmap_access_table stpmic1_volatile_table = { + .yes_ranges = stpmic1_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(stpmic1_volatile_ranges), +}; + +const struct regmap_config stpmic1_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = PMIC_MAX_REGISTER_ADDRESS, + .rd_table = &stpmic1_readable_table, + .wr_table = &stpmic1_writeable_table, + .volatile_table = &stpmic1_volatile_table, +}; + +static const struct regmap_irq stpmic1_irqs[] = { + REGMAP_IRQ_REG(IT_PONKEY_F, 0, 0x01), + REGMAP_IRQ_REG(IT_PONKEY_R, 0, 0x02), + REGMAP_IRQ_REG(IT_WAKEUP_F, 0, 0x04), + REGMAP_IRQ_REG(IT_WAKEUP_R, 0, 0x08), + REGMAP_IRQ_REG(IT_VBUS_OTG_F, 0, 0x10), + REGMAP_IRQ_REG(IT_VBUS_OTG_R, 0, 0x20), + REGMAP_IRQ_REG(IT_SWOUT_F, 0, 0x40), + REGMAP_IRQ_REG(IT_SWOUT_R, 0, 0x80), + + REGMAP_IRQ_REG(IT_CURLIM_BUCK1, 1, 0x01), + REGMAP_IRQ_REG(IT_CURLIM_BUCK2, 1, 0x02), + REGMAP_IRQ_REG(IT_CURLIM_BUCK3, 1, 0x04), + REGMAP_IRQ_REG(IT_CURLIM_BUCK4, 1, 0x08), + REGMAP_IRQ_REG(IT_OCP_OTG, 1, 0x10), + REGMAP_IRQ_REG(IT_OCP_SWOUT, 1, 0x20), + REGMAP_IRQ_REG(IT_OCP_BOOST, 1, 0x40), + REGMAP_IRQ_REG(IT_OVP_BOOST, 1, 0x80), + + REGMAP_IRQ_REG(IT_CURLIM_LDO1, 2, 0x01), + REGMAP_IRQ_REG(IT_CURLIM_LDO2, 2, 0x02), + REGMAP_IRQ_REG(IT_CURLIM_LDO3, 2, 0x04), + REGMAP_IRQ_REG(IT_CURLIM_LDO4, 2, 0x08), + REGMAP_IRQ_REG(IT_CURLIM_LDO5, 2, 0x10), + REGMAP_IRQ_REG(IT_CURLIM_LDO6, 2, 0x20), + REGMAP_IRQ_REG(IT_SHORT_SWOTG, 2, 0x40), + REGMAP_IRQ_REG(IT_SHORT_SWOUT, 2, 0x80), + + REGMAP_IRQ_REG(IT_TWARN_F, 3, 0x01), + REGMAP_IRQ_REG(IT_TWARN_R, 3, 0x02), + REGMAP_IRQ_REG(IT_VINLOW_F, 3, 0x04), + REGMAP_IRQ_REG(IT_VINLOW_R, 3, 0x08), + REGMAP_IRQ_REG(IT_SWIN_F, 3, 0x40), + REGMAP_IRQ_REG(IT_SWIN_R, 3, 0x80), +}; + +static const struct regmap_irq_chip stpmic1_regmap_irq_chip = { + .name = "pmic_irq", + .status_base = INT_PENDING_R1, + .mask_base = INT_CLEAR_MASK_R1, + .unmask_base = INT_SET_MASK_R1, + .ack_base = INT_CLEAR_R1, + .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS, + .irqs = stpmic1_irqs, + .num_irqs = ARRAY_SIZE(stpmic1_irqs), +}; + +static int stpmic1_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct stpmic1 *ddata; + struct device *dev = &i2c->dev; + int ret; + struct device_node *np = dev->of_node; + u32 reg; + + ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + i2c_set_clientdata(i2c, ddata); + ddata->dev = dev; + + ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ); + if (ddata->irq < 0) { + dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq); + return ddata->irq; + } + + ret = regmap_read(ddata->regmap, VERSION_SR, ®); + if (ret) { + dev_err(dev, "Unable to read PMIC version\n"); + return ret; + } + dev_info(dev, "PMIC Chip Version: 0x%x\n", reg); + + /* Initialize PMIC IRQ Chip & associated IRQ domains */ + ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq, + IRQF_ONESHOT | IRQF_SHARED, + 0, &stpmic1_regmap_irq_chip, + &ddata->irq_data); + if (ret) { + dev_err(dev, "IRQ Chip registration failed: %d\n", ret); + return ret; + } + + return devm_of_platform_populate(dev); +} + +#ifdef CONFIG_PM_SLEEP +static int stpmic1_suspend(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c); + + disable_irq(pmic_dev->irq); + + return 0; +} + +static int stpmic1_resume(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c); + int ret; + + ret = regcache_sync(pmic_dev->regmap); + if (ret) + return ret; + + enable_irq(pmic_dev->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(stpmic1_pm, stpmic1_suspend, stpmic1_resume); + +static const struct of_device_id stpmic1_of_match[] = { + { .compatible = "st,stpmic1", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stpmic1_of_match); + +static struct i2c_driver stpmic1_driver = { + .driver = { + .name = "stpmic1", + .of_match_table = of_match_ptr(stpmic1_of_match), + .pm = &stpmic1_pm, + }, + .probe = stpmic1_probe, +}; + +module_i2c_driver(stpmic1_driver); + +MODULE_DESCRIPTION("STPMIC1 PMIC Driver"); +MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 57f017d74a97..65c3c42b5e7c 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -817,6 +817,18 @@ config STM32_WATCHDOG To compile this driver as a module, choose M here: the module will be called stm32_iwdg. +config STPMIC1_WATCHDOG + tristate "STPMIC1 PMIC watchdog support" + depends on MFD_STPMIC1 + select WATCHDOG_CORE + help + Say Y here to include watchdog support embedded into STPMIC1 PMIC. + If the watchdog timer expires, stpmic1 will shut down all its power + supplies. + + To compile this driver as a module, choose M here: the + module will be called spmic1_wdt. + config UNIPHIER_WATCHDOG tristate "UniPhier watchdog support" depends on ARCH_UNIPHIER || COMPILE_TEST diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index a0917ef28e07..4e78a8c73f0c 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -220,3 +220,4 @@ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o +obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o diff --git a/drivers/watchdog/stpmic1_wdt.c b/drivers/watchdog/stpmic1_wdt.c new file mode 100644 index 000000000000..ad431d8ad95f --- /dev/null +++ b/drivers/watchdog/stpmic1_wdt.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics. + +#include <linux/kernel.h> +#include <linux/mfd/stpmic1.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/watchdog.h> + +/* WATCHDOG CONTROL REGISTER bit */ +#define WDT_START BIT(0) +#define WDT_PING BIT(1) +#define WDT_START_MASK BIT(0) +#define WDT_PING_MASK BIT(1) +#define WDT_STOP 0 + +#define PMIC_WDT_MIN_TIMEOUT 1 +#define PMIC_WDT_MAX_TIMEOUT 256 +#define PMIC_WDT_DEFAULT_TIMEOUT 30 + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct stpmic1_wdt { + struct stpmic1 *pmic; + struct watchdog_device wdtdev; +}; + +static int pmic_wdt_start(struct watchdog_device *wdd) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->pmic->regmap, + WCHDG_CR, WDT_START_MASK, WDT_START); +} + +static int pmic_wdt_stop(struct watchdog_device *wdd) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->pmic->regmap, + WCHDG_CR, WDT_START_MASK, WDT_STOP); +} + +static int pmic_wdt_ping(struct watchdog_device *wdd) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + return regmap_update_bits(wdt->pmic->regmap, + WCHDG_CR, WDT_PING_MASK, WDT_PING); +} + +static int pmic_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd); + + wdd->timeout = timeout; + /* timeout is equal to register value + 1 */ + return regmap_write(wdt->pmic->regmap, WCHDG_TIMER_CR, timeout - 1); +} + +static const struct watchdog_info pmic_watchdog_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "STPMIC1 PMIC Watchdog", +}; + +static const struct watchdog_ops pmic_watchdog_ops = { + .owner = THIS_MODULE, + .start = pmic_wdt_start, + .stop = pmic_wdt_stop, + .ping = pmic_wdt_ping, + .set_timeout = pmic_wdt_set_timeout, +}; + +static int pmic_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct stpmic1 *pmic; + struct stpmic1_wdt *wdt; + + if (!pdev->dev.parent) + return -EINVAL; + + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) + return -EINVAL; + + wdt = devm_kzalloc(&pdev->dev, sizeof(struct stpmic1_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->pmic = pmic; + + wdt->wdtdev.info = &pmic_watchdog_info; + wdt->wdtdev.ops = &pmic_watchdog_ops; + wdt->wdtdev.min_timeout = PMIC_WDT_MIN_TIMEOUT; + wdt->wdtdev.max_timeout = PMIC_WDT_MAX_TIMEOUT; + wdt->wdtdev.parent = &pdev->dev; + + wdt->wdtdev.timeout = PMIC_WDT_DEFAULT_TIMEOUT; + watchdog_init_timeout(&wdt->wdtdev, 0, &pdev->dev); + + watchdog_set_nowayout(&wdt->wdtdev, nowayout); + watchdog_set_drvdata(&wdt->wdtdev, wdt); + + ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev); + if (ret) + return ret; + + dev_dbg(wdt->pmic->dev, "PMIC Watchdog driver probed\n"); + return 0; +} + +static const struct of_device_id of_pmic_wdt_match[] = { + { .compatible = "st,stpmic1-wdt" }, + { }, +}; + +MODULE_DEVICE_TABLE(of, of_pmic_wdt_match); + +static struct platform_driver stpmic1_wdt_driver = { + .probe = pmic_wdt_probe, + .driver = { + .name = "stpmic1-wdt", + .of_match_table = of_pmic_wdt_match, + }, +}; +module_platform_driver(stpmic1_wdt_driver); + +MODULE_DESCRIPTION("Watchdog driver for STPMIC1 device"); +MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/dt-bindings/mfd/st,stpmic1.h b/include/dt-bindings/mfd/st,stpmic1.h new file mode 100644 index 000000000000..321cd08797d9 --- /dev/null +++ b/include/dt-bindings/mfd/st,stpmic1.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Philippe Peurichard <philippe.peurichard@st.com>, + * Pascal Paillet <p.paillet@st.com> for STMicroelectronics. + */ + +#ifndef __DT_BINDINGS_STPMIC1_H__ +#define __DT_BINDINGS_STPMIC1_H__ + +/* IRQ definitions */ +#define IT_PONKEY_F 0 +#define IT_PONKEY_R 1 +#define IT_WAKEUP_F 2 +#define IT_WAKEUP_R 3 +#define IT_VBUS_OTG_F 4 +#define IT_VBUS_OTG_R 5 +#define IT_SWOUT_F 6 +#define IT_SWOUT_R 7 + +#define IT_CURLIM_BUCK1 8 +#define IT_CURLIM_BUCK2 9 +#define IT_CURLIM_BUCK3 10 +#define IT_CURLIM_BUCK4 11 +#define IT_OCP_OTG 12 +#define IT_OCP_SWOUT 13 +#define IT_OCP_BOOST 14 +#define IT_OVP_BOOST 15 + +#define IT_CURLIM_LDO1 16 +#define IT_CURLIM_LDO2 17 +#define IT_CURLIM_LDO3 18 +#define IT_CURLIM_LDO4 19 +#define IT_CURLIM_LDO5 20 +#define IT_CURLIM_LDO6 21 +#define IT_SHORT_SWOTG 22 +#define IT_SHORT_SWOUT 23 + +#define IT_TWARN_F 24 +#define IT_TWARN_R 25 +#define IT_VINLOW_F 26 +#define IT_VINLOW_R 27 +#define IT_SWIN_F 30 +#define IT_SWIN_R 31 + +/* BUCK MODES definitions */ +#define STPMIC1_BUCK_MODE_NORMAL 0 +#define STPMIC1_BUCK_MODE_LP 2 + +#endif /* __DT_BINDINGS_STPMIC1_H__ */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 4a827af17e59..07f55aac9390 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -10,6 +10,20 @@ #include <linux/mutex.h> +#define STMPE_SAMPLE_TIME(x) ((x & 0xf) << 4) +#define STMPE_MOD_12B(x) ((x & 0x1) << 3) +#define STMPE_REF_SEL(x) ((x & 0x1) << 1) +#define STMPE_ADC_FREQ(x) (x & 0x3) +#define STMPE_AVE_CTRL(x) ((x & 0x3) << 6) +#define STMPE_DET_DELAY(x) ((x & 0x7) << 3) +#define STMPE_SETTLING(x) (x & 0x7) +#define STMPE_FRACTION_Z(x) (x & 0x7) +#define STMPE_I_DRIVE(x) (x & 0x1) +#define STMPE_OP_MODE(x) ((x & 0x7) << 1) + +#define STMPE811_REG_ADC_CTRL1 0x20 +#define STMPE811_REG_ADC_CTRL2 0x21 + struct device; struct regulator; @@ -123,6 +137,12 @@ struct stmpe { u8 ier[2]; u8 oldier[2]; struct stmpe_platform_data *pdata; + + /* For devices that use an ADC */ + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; }; extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data); @@ -136,6 +156,7 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block); extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks); extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); +extern int stmpe811_adc_common_init(struct stmpe *stmpe); #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h new file mode 100644 index 000000000000..fa3f99f7e9a1 --- /dev/null +++ b/include/linux/mfd/stpmic1.h @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Philippe Peurichard <philippe.peurichard@st.com>, + * Pascal Paillet <p.paillet@st.com> for STMicroelectronics. + */ + +#ifndef __LINUX_MFD_STPMIC1_H +#define __LINUX_MFD_STPMIC1_H + +#define TURN_ON_SR 0x1 +#define TURN_OFF_SR 0x2 +#define ICC_LDO_TURN_OFF_SR 0x3 +#define ICC_BUCK_TURN_OFF_SR 0x4 +#define RREQ_STATE_SR 0x5 +#define VERSION_SR 0x6 + +#define SWOFF_PWRCTRL_CR 0x10 +#define PADS_PULL_CR 0x11 +#define BUCKS_PD_CR 0x12 +#define LDO14_PD_CR 0x13 +#define LDO56_VREF_PD_CR 0x14 +#define VBUS_DET_VIN_CR 0x15 +#define PKEY_TURNOFF_CR 0x16 +#define BUCKS_MASK_RANK_CR 0x17 +#define BUCKS_MASK_RESET_CR 0x18 +#define LDOS_MASK_RANK_CR 0x19 +#define LDOS_MASK_RESET_CR 0x1A +#define WCHDG_CR 0x1B +#define WCHDG_TIMER_CR 0x1C +#define BUCKS_ICCTO_CR 0x1D +#define LDOS_ICCTO_CR 0x1E + +#define BUCK1_ACTIVE_CR 0x20 +#define BUCK2_ACTIVE_CR 0x21 +#define BUCK3_ACTIVE_CR 0x22 +#define BUCK4_ACTIVE_CR 0x23 +#define VREF_DDR_ACTIVE_CR 0x24 +#define LDO1_ACTIVE_CR 0x25 +#define LDO2_ACTIVE_CR 0x26 +#define LDO3_ACTIVE_CR 0x27 +#define LDO4_ACTIVE_CR 0x28 +#define LDO5_ACTIVE_CR 0x29 +#define LDO6_ACTIVE_CR 0x2A + +#define BUCK1_STDBY_CR 0x30 +#define BUCK2_STDBY_CR 0x31 +#define BUCK3_STDBY_CR 0x32 +#define BUCK4_STDBY_CR 0x33 +#define VREF_DDR_STDBY_CR 0x34 +#define LDO1_STDBY_CR 0x35 +#define LDO2_STDBY_CR 0x36 +#define LDO3_STDBY_CR 0x37 +#define LDO4_STDBY_CR 0x38 +#define LDO5_STDBY_CR 0x39 +#define LDO6_STDBY_CR 0x3A + +#define BST_SW_CR 0x40 + +#define INT_PENDING_R1 0x50 +#define INT_PENDING_R2 0x51 +#define INT_PENDING_R3 0x52 +#define INT_PENDING_R4 0x53 + +#define INT_DBG_LATCH_R1 0x60 +#define INT_DBG_LATCH_R2 0x61 +#define INT_DBG_LATCH_R3 0x62 +#define INT_DBG_LATCH_R4 0x63 + +#define INT_CLEAR_R1 0x70 +#define INT_CLEAR_R2 0x71 +#define INT_CLEAR_R3 0x72 +#define INT_CLEAR_R4 0x73 + +#define INT_MASK_R1 0x80 +#define INT_MASK_R2 0x81 +#define INT_MASK_R3 0x82 +#define INT_MASK_R4 0x83 + +#define INT_SET_MASK_R1 0x90 +#define INT_SET_MASK_R2 0x91 +#define INT_SET_MASK_R3 0x92 +#define INT_SET_MASK_R4 0x93 + +#define INT_CLEAR_MASK_R1 0xA0 +#define INT_CLEAR_MASK_R2 0xA1 +#define INT_CLEAR_MASK_R3 0xA2 +#define INT_CLEAR_MASK_R4 0xA3 + +#define INT_SRC_R1 0xB0 +#define INT_SRC_R2 0xB1 +#define INT_SRC_R3 0xB2 +#define INT_SRC_R4 0xB3 + +#define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4 + +#define STPMIC1_PMIC_NUM_IRQ_REGS 4 + +#define TURN_OFF_SR_ICC_EVENT 0x08 + +#define LDO_VOLTAGE_MASK GENMASK(6, 2) +#define BUCK_VOLTAGE_MASK GENMASK(7, 2) +#define LDO_BUCK_VOLTAGE_SHIFT 2 + +#define LDO_ENABLE_MASK BIT(0) +#define BUCK_ENABLE_MASK BIT(0) + +#define BUCK_HPLP_ENABLE_MASK BIT(1) +#define BUCK_HPLP_SHIFT 1 + +#define STDBY_ENABLE_MASK BIT(0) + +#define BUCKS_PD_CR_REG_MASK GENMASK(7, 0) +#define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0) +#define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0) +#define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0) +#define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0) +#define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0) +#define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0) + +#define BUCK1_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK1_PULL_DOWN_MASK BIT(0) +#define BUCK2_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK2_PULL_DOWN_MASK BIT(2) +#define BUCK3_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK3_PULL_DOWN_MASK BIT(4) +#define BUCK4_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK4_PULL_DOWN_MASK BIT(6) + +#define LDO1_PULL_DOWN_REG LDO14_PD_CR +#define LDO1_PULL_DOWN_MASK BIT(0) +#define LDO2_PULL_DOWN_REG LDO14_PD_CR +#define LDO2_PULL_DOWN_MASK BIT(2) +#define LDO3_PULL_DOWN_REG LDO14_PD_CR +#define LDO3_PULL_DOWN_MASK BIT(4) +#define LDO4_PULL_DOWN_REG LDO14_PD_CR +#define LDO4_PULL_DOWN_MASK BIT(6) +#define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR +#define LDO5_PULL_DOWN_MASK BIT(0) +#define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR +#define LDO6_PULL_DOWN_MASK BIT(2) +#define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR +#define VREF_DDR_PULL_DOWN_MASK BIT(4) + +#define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0) +#define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0) + +#define LDO_BYPASS_MASK BIT(7) + +/* Main PMIC Control Register + * SWOFF_PWRCTRL_CR + * Address : 0x10 + */ +#define ICC_EVENT_ENABLED BIT(4) +#define PWRCTRL_POLARITY_HIGH BIT(3) +#define PWRCTRL_PIN_VALID BIT(2) +#define RESTART_REQUEST_ENABLED BIT(1) +#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0) + +/* Main PMIC PADS Control Register + * PADS_PULL_CR + * Address : 0x11 + */ +#define WAKEUP_DETECTOR_DISABLED BIT(4) +#define PWRCTRL_PD_ACTIVE BIT(3) +#define PWRCTRL_PU_ACTIVE BIT(2) +#define WAKEUP_PD_ACTIVE BIT(1) +#define PONKEY_PU_INACTIVE BIT(0) + +/* Main PMIC VINLOW Control Register + * VBUS_DET_VIN_CRC DMSC + * Address : 0x15 + */ +#define SWIN_DETECTOR_ENABLED BIT(7) +#define SWOUT_DETECTOR_ENABLED BIT(6) +#define VINLOW_ENABLED BIT(0) +#define VINLOW_CTRL_REG_MASK GENMASK(7, 0) + +/* USB Control Register + * Address : 0x40 + */ +#define BOOST_OVP_DISABLED BIT(7) +#define VBUS_OTG_DETECTION_DISABLED BIT(6) +#define SW_OUT_DISCHARGE BIT(5) +#define VBUS_OTG_DISCHARGE BIT(4) +#define OCP_LIMIT_HIGH BIT(3) +#define SWIN_SWOUT_ENABLED BIT(2) +#define USBSW_OTG_SWITCH_ENABLED BIT(1) +#define BOOST_ENABLED BIT(0) + +/* PKEY_TURNOFF_CR + * Address : 0x16 + */ +#define PONKEY_PWR_OFF BIT(7) +#define PONKEY_CC_FLAG_CLEAR BIT(6) +#define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0) +#define PONKEY_TURNOFF_MASK GENMASK(7, 0) + +/* + * struct stpmic1 - stpmic1 master device for sub-drivers + * @dev: master device of the chip (can be used to access platform data) + * @irq: main IRQ number + * @regmap_irq_chip_data: irq chip data + */ +struct stpmic1 { + struct device *dev; + struct regmap *regmap; + int irq; + struct regmap_irq_chip_data *irq_data; +}; + +#endif /* __LINUX_MFD_STPMIC1_H */ |