aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml1
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/bcm2711.dtsi50
-rw-r--r--arch/arm/boot/dts/bcm2835.dtsi17
-rw-r--r--arch/arm/boot/dts/bcm2836.dtsi50
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts136
-rw-r--r--arch/arm/boot/dts/bcm2837.dtsi49
-rw-r--r--arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts76
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts8
-rw-r--r--arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi10
-rw-r--r--arch/arm64/boot/dts/broadcom/Makefile3
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts2
14 files changed, 403 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index 5dc48241efb3..8051a75c2c79 100644
--- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -51,6 +51,7 @@ properties:
- raspberrypi,3-model-b-plus
- raspberrypi,3-compute-module
- raspberrypi,3-compute-module-lite
+ - raspberrypi,model-zero-2-w
- const: brcm,bcm2837
additionalProperties: true
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2f4a347dad2c..ef21d19a855c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb \
+ bcm2837-rpi-zero-2-w.dtb \
bcm2711-rpi-400.dtb \
bcm2711-rpi-4-b.dtb \
bcm2711-rpi-cm4-io.dtb \
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index dff18fc9a906..0f2f26dc5ec6 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -458,12 +458,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -472,6 +486,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -480,6 +501,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -488,6 +516,28 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+ cache-level = <2>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 0549686134ea..1c90e5a44283 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -14,6 +14,23 @@
device_type = "cpu";
compatible = "arm,arm1176jzf-s";
reg = <0x0>;
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0301
+ * /h/level-one-memory-system/cache-organization?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://forums.raspberrypi.com/viewtopic.php?t=98428
+ *
+ * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+ * It can be shared with the CPU through fw settings,
+ * but this is not recommended.
+ */
+ d-cache-size = <0x4000>;
+ d-cache-line-size = <16>;
+ d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+ i-cache-size = <0x4000>;
+ i-cache-line-size = <16>;
+ i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
};
};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index b390006aef79..534dacfc4dd5 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -41,11 +41,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp";
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+ * /About-the-L1-memory-system?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://forums.raspberrypi.com/viewtopic.php?t=98428
+ */
+
v7_cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
};
v7_cpu1: cpu@1 {
@@ -53,6 +68,13 @@
compatible = "arm,cortex-a7";
reg = <0xf01>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
};
v7_cpu2: cpu@2 {
@@ -60,6 +82,13 @@
compatible = "arm,cortex-a7";
reg = <0xf02>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
};
v7_cpu3: cpu@3 {
@@ -67,6 +96,27 @@
compatible = "arm,cortex-a7";
reg = <0xf03>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for cache-line-size + cache-sets
+ * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+ * /About-the-L2-Memory-system?lang=en
+ * Source for cache-size
+ * https://forums.raspberrypi.com/viewtopic.php?t=98428
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
};
};
};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..4a768562985e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <[email protected]>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+ model = "Raspberry Pi Zero 2 W";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
+ leds {
+ led-act {
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&bt {
+ shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+ /*
+ * This is based on the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD0",
+ "RXD0",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "HDMI_HPD_N",
+ "STATUS_LED_N",
+ "NC", /* GPIO30 */
+ "NC", /* GPIO31 */
+ "NC", /* GPIO32 */
+ "NC", /* GPIO33 */
+ "NC", /* GPIO34 */
+ "NC", /* GPIO35 */
+ "NC", /* GPIO36 */
+ "NC", /* GPIO37 */
+ "NC", /* GPIO38 */
+ "NC", /* GPIO39 */
+ "CAM_GPIO0", /* GPIO40 */
+ "WL_ON", /* GPIO41 */
+ "BT_ON", /* GPIO42 */
+ "WIFI_CLK", /* GPIO43 */
+ "SDA0", /* GPIO44 */
+ "SCL0", /* GPIO45 */
+ "SMPS_SCL",
+ "SMPS_SDA",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+ status = "okay";
+};
+
+&sdhci {
+ pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_gpio14>;
+ status = "okay";
+};
+
+&wifi_pwrseq {
+ reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+ * /about-the-l1-memory-system?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -54,6 +68,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -62,6 +83,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -70,6 +98,27 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for cache-line-size + cache-sets
+ * https://developer.arm.com/documentation/ddi0500
+ * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+ * Source for cache-size
+ * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+ cache-level = <2>;
};
};
};
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index 249476fdad7a..82f9629f0abb 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,6 +93,82 @@
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
};
+
+ switch {
+ compatible = "realtek,rtl8365mb";
+ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ realtek,disable-leds;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ phy-handle = <&ethphy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan6";
+ phy-handle = <&ethphy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan7";
+ phy-handle = <&ethphy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan8";
+ phy-handle = <&ethphy3>;
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&sw0_p5>;
+ phy-mode = "rgmii";
+ tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <2100>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ compatible = "realtek,smi-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+ };
};
&srab {
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 24ae3c8a3e09..9efcb2424228 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -25,6 +25,9 @@
nvram@1eff0000 {
compatible = "brcm,nvram";
reg = <0x1eff0000 0x10000>;
+
+ et0macaddr: et0macaddr {
+ };
};
leds {
@@ -72,6 +75,11 @@
};
};
+&gmac0 {
+ nvmem-cells = <&et0macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index ba01054a76cf..58b7d9fc7574 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -57,10 +57,9 @@
led-4 {
/* amber:power */
- function = LED_FUNCTION_POWER;
+ function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
};
led-5 {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
index 7c487c74fd10..576cfc52567b 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -106,10 +106,9 @@
led-a {
/* amber:power */
- function = LED_FUNCTION_POWER;
+ function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
- default-state = "on";
};
led-b {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
index 6519b7c61af1..b0854d881ac6 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -22,7 +22,7 @@
};
led-2 {
- function = LED_FUNCTION_INDICATOR;
+ function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
pwms = <&pwm 2 50000>;
max-brightness = <255>;
@@ -39,6 +39,8 @@
&amac2 {
status = "okay";
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
};
&ehci0 {
@@ -53,6 +55,12 @@
reg = <0x50>;
pagesize = <32>;
read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index c6882032a428..5082fcd1fea5 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -5,7 +5,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
bcm2837-rpi-3-a-plus.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
- bcm2837-rpi-cm3-io3.dtb
+ bcm2837-rpi-cm3-io3.dtb \
+ bcm2837-rpi-zero-2-w.dtb
subdir-y += bcm4908
subdir-y += northstar2
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..307ae693e4a0
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-zero-2-w.dts"
Powered by cgit, Gruvboxed by Blaster4385.