aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/spi/spi-bcm2835.c45
-rw-r--r--drivers/spi/spi-fsl-spi.c18
-rw-r--r--drivers/spi/spi-img-spfi.c56
-rw-r--r--drivers/spi/spi-lantiq-ssc.c4
-rw-r--r--drivers/spi/spi-npcm-pspi.c28
-rw-r--r--drivers/spi/spi.c11
-rw-r--r--include/linux/spi/spi.h4
7 files changed, 50 insertions, 116 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 237bd306c268..e9a91adf03eb 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -86,6 +86,7 @@ MODULE_PARM_DESC(polling_limit_us,
* @clk: core clock, divided to calculate serial clock
* @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full
* @tfr: SPI transfer currently processed
+ * @ctlr: SPI controller reverse lookup
* @tx_buf: pointer whence next transmitted byte is read
* @rx_buf: pointer where next received byte is written
* @tx_len: remaining bytes to transmit
@@ -125,6 +126,7 @@ struct bcm2835_spi {
struct clk *clk;
int irq;
struct spi_transfer *tfr;
+ struct spi_controller *ctlr;
const u8 *tx_buf;
u8 *rx_buf;
int tx_len;
@@ -243,13 +245,13 @@ static inline void bcm2835_rd_fifo_count(struct bcm2835_spi *bs, int count)
bs->rx_len -= count;
- while (count > 0) {
+ do {
val = bcm2835_rd(bs, BCM2835_SPI_FIFO);
len = min(count, 4);
memcpy(bs->rx_buf, &val, len);
bs->rx_buf += len;
count -= 4;
- }
+ } while (count > 0);
}
/**
@@ -269,7 +271,7 @@ static inline void bcm2835_wr_fifo_count(struct bcm2835_spi *bs, int count)
bs->tx_len -= count;
- while (count > 0) {
+ do {
if (bs->tx_buf) {
len = min(count, 4);
memcpy(&val, bs->tx_buf, len);
@@ -279,7 +281,7 @@ static inline void bcm2835_wr_fifo_count(struct bcm2835_spi *bs, int count)
}
bcm2835_wr(bs, BCM2835_SPI_FIFO, val);
count -= 4;
- }
+ } while (count > 0);
}
/**
@@ -308,12 +310,11 @@ static inline void bcm2835_rd_fifo_blind(struct bcm2835_spi *bs, int count)
count = min(count, bs->rx_len);
bs->rx_len -= count;
- while (count) {
+ do {
val = bcm2835_rd(bs, BCM2835_SPI_FIFO);
if (bs->rx_buf)
*bs->rx_buf++ = val;
- count--;
- }
+ } while (--count);
}
/**
@@ -328,16 +329,14 @@ static inline void bcm2835_wr_fifo_blind(struct bcm2835_spi *bs, int count)
count = min(count, bs->tx_len);
bs->tx_len -= count;
- while (count) {
+ do {
val = bs->tx_buf ? *bs->tx_buf++ : 0;
bcm2835_wr(bs, BCM2835_SPI_FIFO, val);
- count--;
- }
+ } while (--count);
}
-static void bcm2835_spi_reset_hw(struct spi_controller *ctlr)
+static void bcm2835_spi_reset_hw(struct bcm2835_spi *bs)
{
- struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
/* Disable SPI interrupts and transfer */
@@ -363,8 +362,7 @@ static void bcm2835_spi_reset_hw(struct spi_controller *ctlr)
static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
{
- struct spi_controller *ctlr = dev_id;
- struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+ struct bcm2835_spi *bs = dev_id;
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
/*
@@ -386,9 +384,9 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
if (!bs->rx_len) {
/* Transfer complete - reset SPI HW */
- bcm2835_spi_reset_hw(ctlr);
+ bcm2835_spi_reset_hw(bs);
/* wake up the framework */
- complete(&ctlr->xfer_completion);
+ complete(&bs->ctlr->xfer_completion);
}
return IRQ_HANDLED;
@@ -607,7 +605,7 @@ static void bcm2835_spi_dma_rx_done(void *data)
bcm2835_spi_undo_prologue(bs);
/* reset fifo and HW */
- bcm2835_spi_reset_hw(ctlr);
+ bcm2835_spi_reset_hw(bs);
/* and mark as completed */;
complete(&ctlr->xfer_completion);
@@ -641,7 +639,7 @@ static void bcm2835_spi_dma_tx_done(void *data)
dmaengine_terminate_async(ctlr->dma_rx);
bcm2835_spi_undo_prologue(bs);
- bcm2835_spi_reset_hw(ctlr);
+ bcm2835_spi_reset_hw(bs);
complete(&ctlr->xfer_completion);
}
@@ -825,14 +823,14 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr,
if (!bs->rx_buf && !bs->tx_dma_active &&
cmpxchg(&bs->rx_dma_active, true, false)) {
dmaengine_terminate_async(ctlr->dma_rx);
- bcm2835_spi_reset_hw(ctlr);
+ bcm2835_spi_reset_hw(bs);
}
/* wait for wakeup in framework */
return 1;
err_reset_hw:
- bcm2835_spi_reset_hw(ctlr);
+ bcm2835_spi_reset_hw(bs);
bcm2835_spi_undo_prologue(bs);
return ret;
}
@@ -1074,7 +1072,7 @@ static int bcm2835_spi_transfer_one_poll(struct spi_controller *ctlr,
}
/* Transfer complete - reset SPI HW */
- bcm2835_spi_reset_hw(ctlr);
+ bcm2835_spi_reset_hw(bs);
/* and return without waiting for completion */
return 0;
}
@@ -1182,7 +1180,7 @@ static void bcm2835_spi_handle_err(struct spi_controller *ctlr,
bcm2835_spi_undo_prologue(bs);
/* and reset */
- bcm2835_spi_reset_hw(ctlr);
+ bcm2835_spi_reset_hw(bs);
}
static int chip_match_name(struct gpio_chip *chip, void *data)
@@ -1311,6 +1309,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
ctlr->dev.of_node = pdev->dev.of_node;
bs = spi_controller_get_devdata(ctlr);
+ bs->ctlr = ctlr;
bs->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(bs->regs)) {
@@ -1345,7 +1344,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
- dev_name(&pdev->dev), ctlr);
+ dev_name(&pdev->dev), bs);
if (err) {
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
goto out_dma_release;
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 67f022b8c81d..299e9870cf58 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -90,7 +90,7 @@ static void fsl_spi_change_mode(struct spi_device *spi)
{
struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
struct spi_mpc8xxx_cs *cs = spi->controller_state;
- struct fsl_spi_reg *reg_base = mspi->reg_base;
+ struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
__be32 __iomem *mode = &reg_base->mode;
unsigned long flags;
@@ -291,7 +291,7 @@ static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi,
struct spi_transfer *t, unsigned int len)
{
u32 word;
- struct fsl_spi_reg *reg_base = mspi->reg_base;
+ struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
mspi->count = len;
@@ -309,7 +309,7 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t,
bool is_dma_mapped)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
- struct fsl_spi_reg *reg_base;
+ struct fsl_spi_reg __iomem *reg_base;
unsigned int len = t->len;
u8 bits_per_word;
int ret;
@@ -440,7 +440,7 @@ static int fsl_spi_do_one_msg(struct spi_master *master,
static int fsl_spi_setup(struct spi_device *spi)
{
struct mpc8xxx_spi *mpc8xxx_spi;
- struct fsl_spi_reg *reg_base;
+ struct fsl_spi_reg __iomem *reg_base;
int retval;
u32 hw_mode;
struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi);
@@ -495,7 +495,7 @@ static void fsl_spi_cleanup(struct spi_device *spi)
static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
{
- struct fsl_spi_reg *reg_base = mspi->reg_base;
+ struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
/* We need handle RX first */
if (events & SPIE_NE) {
@@ -530,7 +530,7 @@ static irqreturn_t fsl_spi_irq(s32 irq, void *context_data)
struct mpc8xxx_spi *mspi = context_data;
irqreturn_t ret = IRQ_NONE;
u32 events;
- struct fsl_spi_reg *reg_base = mspi->reg_base;
+ struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
/* Get interrupt events(tx/rx) */
events = mpc8xxx_spi_read_reg(&reg_base->event);
@@ -550,7 +550,7 @@ static irqreturn_t fsl_spi_irq(s32 irq, void *context_data)
static void fsl_spi_grlib_cs_control(struct spi_device *spi, bool on)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
- struct fsl_spi_reg *reg_base = mpc8xxx_spi->reg_base;
+ struct fsl_spi_reg __iomem *reg_base = mpc8xxx_spi->reg_base;
u32 slvsel;
u16 cs = spi->chip_select;
@@ -568,7 +568,7 @@ static void fsl_spi_grlib_probe(struct device *dev)
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
struct spi_master *master = dev_get_drvdata(dev);
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
- struct fsl_spi_reg *reg_base = mpc8xxx_spi->reg_base;
+ struct fsl_spi_reg __iomem *reg_base = mpc8xxx_spi->reg_base;
int mbits;
u32 capabilities;
@@ -594,7 +594,7 @@ static struct spi_master *fsl_spi_probe(struct device *dev,
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
struct spi_master *master;
struct mpc8xxx_spi *mpc8xxx_spi;
- struct fsl_spi_reg *reg_base;
+ struct fsl_spi_reg __iomem *reg_base;
u32 regval;
int ret = 0;
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 8543f5ed1099..b068537375d6 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -9,7 +9,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
-#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -102,10 +101,6 @@ struct img_spfi {
bool rx_dma_busy;
};
-struct img_spfi_device_data {
- bool gpio_requested;
-};
-
static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg)
{
return readl(spfi->regs + reg);
@@ -442,54 +437,6 @@ static int img_spfi_unprepare(struct spi_master *master,
return 0;
}
-static int img_spfi_setup(struct spi_device *spi)
-{
- int ret = -EINVAL;
- struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
-
- if (!spfi_data) {
- spfi_data = kzalloc(sizeof(*spfi_data), GFP_KERNEL);
- if (!spfi_data)
- return -ENOMEM;
- spfi_data->gpio_requested = false;
- spi_set_ctldata(spi, spfi_data);
- }
- if (!spfi_data->gpio_requested) {
- ret = gpio_request_one(spi->cs_gpio,
- (spi->mode & SPI_CS_HIGH) ?
- GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
- dev_name(&spi->dev));
- if (ret)
- dev_err(&spi->dev, "can't request chipselect gpio %d\n",
- spi->cs_gpio);
- else
- spfi_data->gpio_requested = true;
- } else {
- if (gpio_is_valid(spi->cs_gpio)) {
- int mode = ((spi->mode & SPI_CS_HIGH) ?
- GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH);
-
- ret = gpio_direction_output(spi->cs_gpio, mode);
- if (ret)
- dev_err(&spi->dev, "chipselect gpio %d setup failed (%d)\n",
- spi->cs_gpio, ret);
- }
- }
- return ret;
-}
-
-static void img_spfi_cleanup(struct spi_device *spi)
-{
- struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
-
- if (spfi_data) {
- if (spfi_data->gpio_requested)
- gpio_free(spi->cs_gpio);
- kfree(spfi_data);
- spi_set_ctldata(spi, NULL);
- }
-}
-
static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer)
{
@@ -659,12 +606,11 @@ static int img_spfi_probe(struct platform_device *pdev)
master->max_speed_hz = max_speed_hz;
}
- master->setup = img_spfi_setup;
- master->cleanup = img_spfi_cleanup;
master->transfer_one = img_spfi_transfer_one;
master->prepare_message = img_spfi_prepare;
master->unprepare_message = img_spfi_unprepare;
master->handle_err = img_spfi_handle_err;
+ master->use_gpio_descriptors = true;
spfi->tx_ch = dma_request_chan(spfi->dev, "tx");
if (IS_ERR(spfi->tx_ch)) {
diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
index 1fd7ee53d451..1cf650e25e31 100644
--- a/drivers/spi/spi-lantiq-ssc.c
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -15,7 +15,6 @@
#include <linux/completion.h>
#include <linux/spinlock.h>
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
@@ -391,7 +390,7 @@ static int lantiq_ssc_setup(struct spi_device *spidev)
u32 gpocon;
/* GPIOs are used for CS */
- if (gpio_is_valid(spidev->cs_gpio))
+ if (spidev->cs_gpiod)
return 0;
dev_dbg(spi->dev, "using internal chipselect %u\n", cs);
@@ -888,6 +887,7 @@ static int lantiq_ssc_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->num_chipselect = num_cs;
+ master->use_gpio_descriptors = true;
master->setup = lantiq_ssc_setup;
master->set_cs = lantiq_ssc_set_cs;
master->handle_err = lantiq_ssc_handle_err;
diff --git a/drivers/spi/spi-npcm-pspi.c b/drivers/spi/spi-npcm-pspi.c
index 87cd0233c60b..56d10c4511db 100644
--- a/drivers/spi/spi-npcm-pspi.c
+++ b/drivers/spi/spi-npcm-pspi.c
@@ -10,8 +10,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
#include <linux/reset.h>
#include <asm/unaligned.h>
@@ -344,16 +342,9 @@ static int npcm_pspi_probe(struct platform_device *pdev)
struct npcm_pspi *priv;
struct spi_master *master;
unsigned long clk_hz;
- struct device_node *np = pdev->dev.of_node;
- int num_cs, i;
- int csgpio;
int irq;
int ret;
- num_cs = of_gpio_named_count(np, "cs-gpios");
- if (num_cs < 0)
- return num_cs;
-
master = spi_alloc_master(&pdev->dev, sizeof(*priv));
if (!master)
return -ENOMEM;
@@ -418,24 +409,7 @@ static int npcm_pspi_probe(struct platform_device *pdev)
npcm_pspi_prepare_transfer_hardware;
master->unprepare_transfer_hardware =
npcm_pspi_unprepare_transfer_hardware;
- master->num_chipselect = num_cs;
-
- for (i = 0; i < num_cs; i++) {
- csgpio = of_get_named_gpio(np, "cs-gpios", i);
- if (csgpio < 0) {
- dev_err(&pdev->dev, "failed to get csgpio#%u\n", i);
- goto out_disable_clk;
- }
- dev_dbg(&pdev->dev, "csgpio#%u = %d\n", i, csgpio);
- ret = devm_gpio_request_one(&pdev->dev, csgpio,
- GPIOF_OUT_INIT_HIGH, DRIVER_NAME);
- if (ret < 0) {
- dev_err(&pdev->dev,
- "failed to configure csgpio#%u %d\n"
- , i, csgpio);
- goto out_disable_clk;
- }
- }
+ master->use_gpio_descriptors = true;
/* set to default clock rate */
npcm_pspi_set_baudrate(priv, NPCM_PSPI_DEFAULT_CLK);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 6fa56590bba2..d4ba723a30da 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -778,6 +778,17 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
{
bool enable1 = enable;
+ /*
+ * Avoid calling into the driver (or doing delays) if the chip select
+ * isn't actually changing from the last time this was called.
+ */
+ if ((spi->controller->last_cs_enable == enable) &&
+ (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH)))
+ return;
+
+ spi->controller->last_cs_enable = enable;
+ spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
+
if (!spi->controller->set_cs_timing) {
if (enable1)
spi_delay_exec(&spi->controller->cs_setup, NULL);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index b4917df79637..0e67a9a3a1d3 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -368,6 +368,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @cur_msg_prepared: spi_prepare_message was called for the currently
* in-flight message
* @cur_msg_mapped: message has been mapped for DMA
+ * @last_cs_enable: was enable true on the last call to set_cs.
+ * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs.
* @xfer_completion: used by core transfer_one_message()
* @busy: message pump is busy
* @running: message pump is running
@@ -604,6 +606,8 @@ struct spi_controller {
bool auto_runtime_pm;
bool cur_msg_prepared;
bool cur_msg_mapped;
+ bool last_cs_enable;
+ bool last_cs_mode_high;
bool fallback;
struct completion xfer_completion;
size_t max_dma_len;
Powered by cgit, Gruvboxed by Blaster4385.