diff options
| -rw-r--r-- | arch/arm/mach-mvebu/mvebu-soc-id.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/common.h | 2 | ||||
| -rw-r--r-- | drivers/memory/mvebu-devbus.c | 15 |
3 files changed, 26 insertions, 4 deletions
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index f3d4cf53f746..09520e19b78e 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -108,7 +108,18 @@ static int __init mvebu_soc_id_init(void) iounmap(pci_base); res_ioremap: - clk_disable_unprepare(clk); + /* + * If the PCIe unit is actually enabled and we have PCI + * support in the kernel, we intentionally do not release the + * reference to the clock. We want to keep it running since + * the bootloader does some PCIe link configuration that the + * kernel is for now unable to do, and gating the clock would + * make us loose this precious configuration. + */ + if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) { + clk_disable_unprepare(clk); + clk_put(clk); + } clk_err: of_node_put(child); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index f565f9944af2..7548db2bfb8a 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -21,7 +21,7 @@ struct mv_sata_platform_data; #define ORION_MBUS_DEVBUS_BOOT_ATTR 0x0f #define ORION_MBUS_DEVBUS_TARGET(cs) 0x01 #define ORION_MBUS_DEVBUS_ATTR(cs) (~(1 << cs)) -#define ORION_MBUS_SRAM_TARGET 0x00 +#define ORION_MBUS_SRAM_TARGET 0x09 #define ORION_MBUS_SRAM_ATTR 0x00 /* diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c index 110c03627051..b59a17fb7c3e 100644 --- a/drivers/memory/mvebu-devbus.c +++ b/drivers/memory/mvebu-devbus.c @@ -108,8 +108,19 @@ static int devbus_set_timing_params(struct devbus *devbus, node->full_name); return err; } - /* Convert bit width to byte width */ - r.bus_width /= 8; + + /* + * The bus width is encoded into the register as 0 for 8 bits, + * and 1 for 16 bits, so we do the necessary conversion here. + */ + if (r.bus_width == 8) + r.bus_width = 0; + else if (r.bus_width == 16) + r.bus_width = 1; + else { + dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width); + return -EINVAL; + } err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps", &r.badr_skew); |