diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250.h | 29 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 464 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_platform.c | 339 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_rsa.c | 133 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Makefile | 6 | ||||
| -rw-r--r-- | drivers/tty/serial/imx.c | 41 | ||||
| -rw-r--r-- | drivers/tty/serial/sunsu.c | 37 | ||||
| -rw-r--r-- | drivers/tty/vt/keyboard.c | 4 |
8 files changed, 548 insertions, 505 deletions
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 6a7b286f6f5a..e5310c65cf52 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -9,7 +9,7 @@ #include <linux/bits.h> #include <linux/serial_8250.h> -#include <linux/serial_reg.h> +#include <linux/serial_core.h> #include <linux/dmaengine.h> #include "../serial_mctrl_gpio.h" @@ -93,6 +93,10 @@ struct serial8250_config { #define UART_BUG_THRE BIT(3) /* UART has buggy THRE reassertion */ #define UART_BUG_TXRACE BIT(5) /* UART Tx fails to set remote DR */ +/* Module parameters */ +#define UART_NR CONFIG_SERIAL_8250_NR_UARTS + +extern unsigned int nr_uarts; #ifdef CONFIG_SERIAL_8250_SHARE_IRQ #define SERIAL8250_SHARE_IRQS 1 @@ -100,6 +104,9 @@ struct serial8250_config { #define SERIAL8250_SHARE_IRQS 0 #endif +extern unsigned int share_irqs; +extern unsigned int skip_txen_test; + #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \ { \ .iobase = _base, \ @@ -111,6 +118,19 @@ struct serial8250_config { #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0) +extern struct uart_driver serial8250_reg; +void serial8250_register_ports(struct uart_driver *drv, struct device *dev); + +/* Legacy ISA bus related APIs */ +typedef void (*serial8250_isa_config_fn)(int, struct uart_port *, u32 *); +extern serial8250_isa_config_fn serial8250_isa_config; + +void serial8250_isa_init_ports(void); + +extern struct platform_device *serial8250_isa_devs; + +extern const struct uart_ops *univ8250_port_base_ops; +extern struct uart_ops univ8250_port_ops; static inline int serial_in(struct uart_8250_port *up, int offset) { @@ -200,6 +220,7 @@ static inline bool serial8250_clear_THRI(struct uart_8250_port *up) return true; } +struct uart_8250_port *serial8250_setup_port(int index); struct uart_8250_port *serial8250_get_port(int line); void serial8250_rpm_get(struct uart_8250_port *p); @@ -301,6 +322,12 @@ static inline int serial8250_pnp_init(void) { return 0; } static inline void serial8250_pnp_exit(void) { } #endif +#ifdef CONFIG_SERIAL_8250_RSA +void univ8250_rsa_support(struct uart_ops *ops); +#else +static inline void univ8250_rsa_support(struct uart_ops *ops) { } +#endif + #ifdef CONFIG_SERIAL_8250_FINTEK int fintek_8250_probe(struct uart_8250_port *uart); #else diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index ff15022369e4..192f8d19d2fe 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -6,11 +6,9 @@ * * Copyright (C) 2001 Russell King. * - * Supports: ISA-compatible 8250/16550 ports - * PNP 8250/16550 ports + * Supports: * early_serial_setup() ports * userspace-configurable "phantom" ports - * "serial8250" platform devices * serial8250_register_8250_port() ports */ @@ -36,54 +34,13 @@ #include <linux/string_helpers.h> #include <linux/uaccess.h> #include <linux/io.h> -#ifdef CONFIG_SPARC -#include <linux/sunserialcore.h> -#endif #include <asm/irq.h> -#include "../serial_base.h" /* For serial_base_add_isa_preferred_console() */ - #include "8250.h" -/* - * Configuration: - * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option - * is unsafe when used on edge-triggered interrupts. - */ -static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; - -static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; - -static struct uart_driver serial8250_reg; - -static unsigned int skip_txen_test; /* force skip of txen test at init time */ - #define PASS_LIMIT 512 -#include <asm/serial.h> -/* - * SERIAL_PORT_DFNS tells us about built-in ports that have no - * standard enumeration mechanism. Platforms that can find all - * serial ports via mechanisms like ACPI or PCI need not supply it. - */ -#ifndef SERIAL_PORT_DFNS -#define SERIAL_PORT_DFNS -#endif - -static const struct old_serial_port old_serial_port[] = { - SERIAL_PORT_DFNS /* defined in asm/serial.h */ -}; - -#define UART_NR CONFIG_SERIAL_8250_NR_UARTS - -#ifdef CONFIG_SERIAL_8250_RSA - -#define PORT_RSA_MAX 4 -static unsigned long probe_rsa[PORT_RSA_MAX]; -static unsigned int probe_rsa_count; -#endif /* CONFIG_SERIAL_8250_RSA */ - struct irq_info { struct hlist_node node; int irq; @@ -348,45 +305,8 @@ static void univ8250_release_irq(struct uart_8250_port *up) serial_unlink_irq_chain(up); } -#ifdef CONFIG_SERIAL_8250_RSA -static int serial8250_request_rsa_resource(struct uart_8250_port *up) -{ - unsigned long start = UART_RSA_BASE << up->port.regshift; - unsigned int size = 8 << up->port.regshift; - struct uart_port *port = &up->port; - int ret = -EINVAL; - - switch (port->iotype) { - case UPIO_HUB6: - case UPIO_PORT: - start += port->iobase; - if (request_region(start, size, "serial-rsa")) - ret = 0; - else - ret = -EBUSY; - break; - } - - return ret; -} - -static void serial8250_release_rsa_resource(struct uart_8250_port *up) -{ - unsigned long offset = UART_RSA_BASE << up->port.regshift; - unsigned int size = 8 << up->port.regshift; - struct uart_port *port = &up->port; - - switch (port->iotype) { - case UPIO_HUB6: - case UPIO_PORT: - release_region(port->iobase + offset, size); - break; - } -} -#endif - -static const struct uart_ops *base_ops; -static struct uart_ops univ8250_port_ops; +const struct uart_ops *univ8250_port_base_ops = NULL; +struct uart_ops univ8250_port_ops; static const struct uart_8250_ops univ8250_driver_ops = { .setup_irq = univ8250_setup_irq, @@ -414,85 +334,12 @@ struct uart_8250_port *serial8250_get_port(int line) } EXPORT_SYMBOL_GPL(serial8250_get_port); -static void (*serial8250_isa_config)(int port, struct uart_port *up, - u32 *capabilities); - -void serial8250_set_isa_configurator( - void (*v)(int port, struct uart_port *up, u32 *capabilities)) -{ - serial8250_isa_config = v; -} -EXPORT_SYMBOL(serial8250_set_isa_configurator); - -#ifdef CONFIG_SERIAL_8250_RSA - -static void univ8250_config_port(struct uart_port *port, int flags) -{ - struct uart_8250_port *up = up_to_u8250p(port); - - up->probe &= ~UART_PROBE_RSA; - if (port->type == PORT_RSA) { - if (serial8250_request_rsa_resource(up) == 0) - up->probe |= UART_PROBE_RSA; - } else if (flags & UART_CONFIG_TYPE) { - int i; - - for (i = 0; i < probe_rsa_count; i++) { - if (probe_rsa[i] == up->port.iobase) { - if (serial8250_request_rsa_resource(up) == 0) - up->probe |= UART_PROBE_RSA; - break; - } - } - } - - base_ops->config_port(port, flags); - - if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA) - serial8250_release_rsa_resource(up); -} - -static int univ8250_request_port(struct uart_port *port) -{ - struct uart_8250_port *up = up_to_u8250p(port); - int ret; - - ret = base_ops->request_port(port); - if (ret == 0 && port->type == PORT_RSA) { - ret = serial8250_request_rsa_resource(up); - if (ret < 0) - base_ops->release_port(port); - } - - return ret; -} - -static void univ8250_release_port(struct uart_port *port) -{ - struct uart_8250_port *up = up_to_u8250p(port); - - if (port->type == PORT_RSA) - serial8250_release_rsa_resource(up); - base_ops->release_port(port); -} - -static void univ8250_rsa_support(struct uart_ops *ops) -{ - ops->config_port = univ8250_config_port; - ops->request_port = univ8250_request_port; - ops->release_port = univ8250_release_port; -} - -#else -#define univ8250_rsa_support(x) do { } while (0) -#endif /* CONFIG_SERIAL_8250_RSA */ - static inline void serial8250_apply_quirks(struct uart_8250_port *up) { up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0; } -static struct uart_8250_port *serial8250_setup_port(int index) +struct uart_8250_port *serial8250_setup_port(int index) { struct uart_8250_port *up; @@ -504,8 +351,8 @@ static struct uart_8250_port *serial8250_setup_port(int index) up->port.port_id = index; serial8250_init_port(up); - if (!base_ops) - base_ops = up->port.ops; + if (!univ8250_port_base_ops) + univ8250_port_base_ops = up->port.ops; up->port.ops = &univ8250_port_ops; timer_setup(&up->timer, serial8250_timeout, 0); @@ -517,59 +364,7 @@ static struct uart_8250_port *serial8250_setup_port(int index) return up; } -static void __init serial8250_isa_init_ports(void) -{ - struct uart_8250_port *up; - static int first = 1; - int i, irqflag = 0; - - if (!first) - return; - first = 0; - - if (nr_uarts > UART_NR) - nr_uarts = UART_NR; - - /* - * Set up initial isa ports based on nr_uart module param, or else - * default to CONFIG_SERIAL_8250_RUNTIME_UARTS. Note that we do not - * need to increase nr_uarts when setting up the initial isa ports. - */ - for (i = 0; i < nr_uarts; i++) - serial8250_setup_port(i); - - /* chain base port ops to support Remote Supervisor Adapter */ - univ8250_port_ops = *base_ops; - univ8250_rsa_support(&univ8250_port_ops); - - if (share_irqs) - irqflag = IRQF_SHARED; - - for (i = 0, up = serial8250_ports; - i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; - i++, up++) { - struct uart_port *port = &up->port; - - port->iobase = old_serial_port[i].port; - port->irq = irq_canonicalize(old_serial_port[i].irq); - port->irqflags = 0; - port->uartclk = old_serial_port[i].baud_base * 16; - port->flags = old_serial_port[i].flags; - port->hub6 = 0; - port->membase = old_serial_port[i].iomem_base; - port->iotype = old_serial_port[i].io_type; - port->regshift = old_serial_port[i].iomem_reg_shift; - - port->irqflags |= irqflag; - if (serial8250_isa_config != NULL) - serial8250_isa_config(i, &up->port, &up->capabilities); - - serial_base_add_isa_preferred_console(serial8250_reg.dev_name, i); - } -} - -static void __init -serial8250_register_ports(struct uart_driver *drv, struct device *dev) +void __init serial8250_register_ports(struct uart_driver *drv, struct device *dev) { int i; @@ -726,7 +521,7 @@ console_initcall(univ8250_console_init); #define SERIAL8250_CONSOLE NULL #endif -static struct uart_driver serial8250_reg = { +struct uart_driver serial8250_reg = { .owner = THIS_MODULE, .driver_name = "serial", .dev_name = "ttyS", @@ -828,120 +623,6 @@ void serial8250_resume_port(int line) EXPORT_SYMBOL(serial8250_resume_port); /* - * Register a set of serial devices attached to a platform device. The - * list is terminated with a zero flags entry, which means we expect - * all entries to have at least UPF_BOOT_AUTOCONF set. - */ -static int serial8250_probe(struct platform_device *dev) -{ - struct plat_serial8250_port *p = dev_get_platdata(&dev->dev); - struct uart_8250_port uart; - int ret, i, irqflag = 0; - - memset(&uart, 0, sizeof(uart)); - - if (share_irqs) - irqflag = IRQF_SHARED; - - for (i = 0; p && p->flags != 0; p++, i++) { - uart.port.iobase = p->iobase; - uart.port.membase = p->membase; - uart.port.irq = p->irq; - uart.port.irqflags = p->irqflags; - uart.port.uartclk = p->uartclk; - uart.port.regshift = p->regshift; - uart.port.iotype = p->iotype; - uart.port.flags = p->flags; - uart.port.mapbase = p->mapbase; - uart.port.mapsize = p->mapsize; - uart.port.hub6 = p->hub6; - uart.port.has_sysrq = p->has_sysrq; - uart.port.private_data = p->private_data; - uart.port.type = p->type; - uart.bugs = p->bugs; - uart.port.serial_in = p->serial_in; - uart.port.serial_out = p->serial_out; - uart.dl_read = p->dl_read; - uart.dl_write = p->dl_write; - uart.port.handle_irq = p->handle_irq; - uart.port.handle_break = p->handle_break; - uart.port.set_termios = p->set_termios; - uart.port.set_ldisc = p->set_ldisc; - uart.port.get_mctrl = p->get_mctrl; - uart.port.pm = p->pm; - uart.port.dev = &dev->dev; - uart.port.irqflags |= irqflag; - ret = serial8250_register_8250_port(&uart); - if (ret < 0) { - dev_err(&dev->dev, "unable to register port at index %d " - "(IO%lx MEM%llx IRQ%d): %d\n", i, - p->iobase, (unsigned long long)p->mapbase, - p->irq, ret); - } - } - return 0; -} - -/* - * Remove serial ports registered against a platform device. - */ -static void serial8250_remove(struct platform_device *dev) -{ - int i; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.dev == &dev->dev) - serial8250_unregister_port(i); - } -} - -static int serial8250_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_suspend_port(&serial8250_reg, &up->port); - } - - return 0; -} - -static int serial8250_resume(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - serial8250_resume_port(i); - } - - return 0; -} - -static struct platform_driver serial8250_isa_driver = { - .probe = serial8250_probe, - .remove_new = serial8250_remove, - .suspend = serial8250_suspend, - .resume = serial8250_resume, - .driver = { - .name = "serial8250", - }, -}; - -/* - * This "device" covers _all_ ISA 8250-compatible serial devices listed - * in the table in include/asm/serial.h - */ -static struct platform_device *serial8250_isa_devs; - -/* * serial8250_register_8250_port and serial8250_unregister_port allows for * 16x50 serial ports to be configured at run-time, to support PCMCIA * modems and PCI multiport cards. @@ -1217,134 +898,5 @@ void serial8250_unregister_port(int line) } EXPORT_SYMBOL(serial8250_unregister_port); -static int __init serial8250_init(void) -{ - int ret; - - if (nr_uarts == 0) - return -ENODEV; - - serial8250_isa_init_ports(); - - pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %s\n", - nr_uarts, str_enabled_disabled(share_irqs)); - -#ifdef CONFIG_SPARC - ret = sunserial_register_minors(&serial8250_reg, UART_NR); -#else - serial8250_reg.nr = UART_NR; - ret = uart_register_driver(&serial8250_reg); -#endif - if (ret) - goto out; - - ret = serial8250_pnp_init(); - if (ret) - goto unreg_uart_drv; - - serial8250_isa_devs = platform_device_alloc("serial8250", - PLAT8250_DEV_LEGACY); - if (!serial8250_isa_devs) { - ret = -ENOMEM; - goto unreg_pnp; - } - - ret = platform_device_add(serial8250_isa_devs); - if (ret) - goto put_dev; - - serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); - - ret = platform_driver_register(&serial8250_isa_driver); - if (ret == 0) - goto out; - - platform_device_del(serial8250_isa_devs); -put_dev: - platform_device_put(serial8250_isa_devs); -unreg_pnp: - serial8250_pnp_exit(); -unreg_uart_drv: -#ifdef CONFIG_SPARC - sunserial_unregister_minors(&serial8250_reg, UART_NR); -#else - uart_unregister_driver(&serial8250_reg); -#endif -out: - return ret; -} - -static void __exit serial8250_exit(void) -{ - struct platform_device *isa_dev = serial8250_isa_devs; - - /* - * This tells serial8250_unregister_port() not to re-register - * the ports (thereby making serial8250_isa_driver permanently - * in use.) - */ - serial8250_isa_devs = NULL; - - platform_driver_unregister(&serial8250_isa_driver); - platform_device_unregister(isa_dev); - - serial8250_pnp_exit(); - -#ifdef CONFIG_SPARC - sunserial_unregister_minors(&serial8250_reg, UART_NR); -#else - uart_unregister_driver(&serial8250_reg); -#endif -} - -module_init(serial8250_init); -module_exit(serial8250_exit); - MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); - -module_param_hw(share_irqs, uint, other, 0644); -MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)"); - -module_param(nr_uarts, uint, 0644); -MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); - -module_param(skip_txen_test, uint, 0644); -MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); - -#ifdef CONFIG_SERIAL_8250_RSA -module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444); -MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); -#endif -MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); - -#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS -#ifndef MODULE -/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name - * working as well for the module options so we don't break people. We - * need to keep the names identical and the convenient macros will happily - * refuse to let us do that by failing the build with redefinition errors - * of global variables. So we stick them inside a dummy function to avoid - * those conflicts. The options still get parsed, and the redefined - * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. - * - * This is hacky. I'm sorry. - */ -static void __used s8250_options(void) -{ -#undef MODULE_PARAM_PREFIX -#define MODULE_PARAM_PREFIX "8250_core." - - module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); - module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); - module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644); -#ifdef CONFIG_SERIAL_8250_RSA - __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, - ¶m_array_ops, .arr = &__param_arr_probe_rsa, - 0444, -1, 0); -#endif -} -#else -MODULE_ALIAS("8250_core"); -#endif -#endif diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c new file mode 100644 index 000000000000..ded985182e04 --- /dev/null +++ b/drivers/tty/serial/8250/8250_platform.c @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Universal/legacy platform driver for 8250/16550-type serial ports + * + * Supports: ISA-compatible 8250/16550 ports + * PNP 8250/16550 ports + * "serial8250" platform devices + */ +#include <linux/array_size.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> + +#include <linux/serial_8250.h> + +#ifdef CONFIG_SPARC +#include <linux/sunserialcore.h> +#endif + +#include "../serial_base.h" /* For serial_base_add_isa_preferred_console() */ +#include "8250.h" + +/* + * Configuration: + * share_irqs Whether we pass IRQF_SHARED to request_irq(). + * This option is unsafe when used on edge-triggered interrupts. + * skip_txen_test Force skip of txen test at init time. + */ +unsigned int share_irqs = SERIAL8250_SHARE_IRQS; +unsigned int skip_txen_test; + +unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; + +#include <asm/serial.h> + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#ifndef SERIAL_PORT_DFNS +#define SERIAL_PORT_DFNS +#endif + +static const struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +serial8250_isa_config_fn serial8250_isa_config; +void serial8250_set_isa_configurator(serial8250_isa_config_fn v) +{ + serial8250_isa_config = v; +} +EXPORT_SYMBOL(serial8250_set_isa_configurator); + +void __init serial8250_isa_init_ports(void) +{ + static int first = 1; + int i, irqflag = 0; + + if (!first) + return; + first = 0; + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + /* + * Set up initial isa ports based on nr_uart module param, or else + * default to CONFIG_SERIAL_8250_RUNTIME_UARTS. Note that we do not + * need to increase nr_uarts when setting up the initial isa ports. + */ + for (i = 0; i < nr_uarts; i++) + serial8250_setup_port(i); + + /* chain base port ops to support Remote Supervisor Adapter */ + univ8250_port_ops = *univ8250_port_base_ops; + univ8250_rsa_support(&univ8250_port_ops); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++) { + struct uart_8250_port *up = serial8250_get_port(i); + struct uart_port *port = &up->port; + + port->iobase = old_serial_port[i].port; + port->irq = irq_canonicalize(old_serial_port[i].irq); + port->irqflags = 0; + port->uartclk = old_serial_port[i].baud_base * 16; + port->flags = old_serial_port[i].flags; + port->hub6 = 0; + port->membase = old_serial_port[i].iomem_base; + port->iotype = old_serial_port[i].io_type; + port->regshift = old_serial_port[i].iomem_reg_shift; + + port->irqflags |= irqflag; + if (serial8250_isa_config != NULL) + serial8250_isa_config(i, &up->port, &up->capabilities); + + serial_base_add_isa_preferred_console(serial8250_reg.dev_name, i); + } +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int serial8250_probe(struct platform_device *dev) +{ + struct plat_serial8250_port *p = dev_get_platdata(&dev->dev); + struct uart_8250_port uart; + int ret, i, irqflag = 0; + + memset(&uart, 0, sizeof(uart)); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0; p && p->flags != 0; p++, i++) { + uart.port.iobase = p->iobase; + uart.port.membase = p->membase; + uart.port.irq = p->irq; + uart.port.irqflags = p->irqflags; + uart.port.uartclk = p->uartclk; + uart.port.regshift = p->regshift; + uart.port.iotype = p->iotype; + uart.port.flags = p->flags; + uart.port.mapbase = p->mapbase; + uart.port.mapsize = p->mapsize; + uart.port.hub6 = p->hub6; + uart.port.has_sysrq = p->has_sysrq; + uart.port.private_data = p->private_data; + uart.port.type = p->type; + uart.bugs = p->bugs; + uart.port.serial_in = p->serial_in; + uart.port.serial_out = p->serial_out; + uart.dl_read = p->dl_read; + uart.dl_write = p->dl_write; + uart.port.handle_irq = p->handle_irq; + uart.port.handle_break = p->handle_break; + uart.port.set_termios = p->set_termios; + uart.port.set_ldisc = p->set_ldisc; + uart.port.get_mctrl = p->get_mctrl; + uart.port.pm = p->pm; + uart.port.dev = &dev->dev; + uart.port.irqflags |= irqflag; + ret = serial8250_register_8250_port(&uart); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static void serial8250_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = serial8250_get_port(i); + + if (up->port.dev == &dev->dev) + serial8250_unregister_port(i); + } +} + +static int serial8250_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = serial8250_get_port(i); + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static int serial8250_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = serial8250_get_port(i); + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + serial8250_resume_port(i); + } + + return 0; +} + +static struct platform_driver serial8250_isa_driver = { + .probe = serial8250_probe, + .remove_new = serial8250_remove, + .suspend = serial8250_suspend, + .resume = serial8250_resume, + .driver = { + .name = "serial8250", + }, +}; + +/* + * This "device" covers _all_ ISA 8250-compatible serial devices listed + * in the table in include/asm/serial.h + */ +struct platform_device *serial8250_isa_devs; + +static int __init serial8250_init(void) +{ + int ret; + + if (nr_uarts == 0) + return -ENODEV; + + serial8250_isa_init_ports(); + + pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %s\n", + nr_uarts, str_enabled_disabled(share_irqs)); + +#ifdef CONFIG_SPARC + ret = sunserial_register_minors(&serial8250_reg, UART_NR); +#else + serial8250_reg.nr = UART_NR; + ret = uart_register_driver(&serial8250_reg); +#endif + if (ret) + goto out; + + ret = serial8250_pnp_init(); + if (ret) + goto unreg_uart_drv; + + serial8250_isa_devs = platform_device_alloc("serial8250", + PLAT8250_DEV_LEGACY); + if (!serial8250_isa_devs) { + ret = -ENOMEM; + goto unreg_pnp; + } + + ret = platform_device_add(serial8250_isa_devs); + if (ret) + goto put_dev; + + serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); + + ret = platform_driver_register(&serial8250_isa_driver); + if (ret == 0) + goto out; + + platform_device_del(serial8250_isa_devs); +put_dev: + platform_device_put(serial8250_isa_devs); +unreg_pnp: + serial8250_pnp_exit(); +unreg_uart_drv: +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +out: + return ret; +} +module_init(serial8250_init); + +static void __exit serial8250_exit(void) +{ + struct platform_device *isa_dev = serial8250_isa_devs; + + /* + * This tells serial8250_unregister_port() not to re-register + * the ports (thereby making serial8250_isa_driver permanently + * in use.) + */ + serial8250_isa_devs = NULL; + + platform_driver_unregister(&serial8250_isa_driver); + platform_device_unregister(isa_dev); + + serial8250_pnp_exit(); + +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +} +module_exit(serial8250_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 serial platform driver"); + +module_param_hw(share_irqs, uint, other, 0644); +MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)"); + +module_param(nr_uarts, uint, 0644); +MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); + +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + +MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); + +#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS +#ifndef MODULE +/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name + * working as well for the module options so we don't break people. We + * need to keep the names identical and the convenient macros will happily + * refuse to let us do that by failing the build with redefinition errors + * of global variables. So we stick them inside a dummy function to avoid + * those conflicts. The options still get parsed, and the redefined + * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. + * + * This is hacky. I'm sorry. + */ +static void __used s8250_options(void) +{ +#undef MODULE_PARAM_PREFIX +#define MODULE_PARAM_PREFIX "8250_core." + + module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); + module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); + module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644); +} +#else +MODULE_ALIAS("8250_core"); +#endif +#endif diff --git a/drivers/tty/serial/8250/8250_rsa.c b/drivers/tty/serial/8250/8250_rsa.c new file mode 100644 index 000000000000..dfaa613e452d --- /dev/null +++ b/drivers/tty/serial/8250/8250_rsa.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/moduleparam.h> + +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include "8250.h" + +#define PORT_RSA_MAX 4 +static unsigned long probe_rsa[PORT_RSA_MAX]; +static unsigned int probe_rsa_count; + +static int rsa8250_request_resource(struct uart_8250_port *up) +{ + unsigned long start = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; + int ret = -EINVAL; + + switch (port->iotype) { + case UPIO_HUB6: + case UPIO_PORT: + start += port->iobase; + if (request_region(start, size, "serial-rsa")) + ret = 0; + else + ret = -EBUSY; + break; + } + + return ret; +} + +static void rsa8250_release_resource(struct uart_8250_port *up) +{ + unsigned long offset = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; + + switch (port->iotype) { + case UPIO_HUB6: + case UPIO_PORT: + release_region(port->iobase + offset, size); + break; + } +} + +static void univ8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int i; + + up->probe &= ~UART_PROBE_RSA; + if (port->type == PORT_RSA) { + if (rsa8250_request_resource(up) == 0) + up->probe |= UART_PROBE_RSA; + } else if (flags & UART_CONFIG_TYPE) { + for (i = 0; i < probe_rsa_count; i++) { + if (probe_rsa[i] == up->port.iobase) { + if (rsa8250_request_resource(up) == 0) + up->probe |= UART_PROBE_RSA; + break; + } + } + } + + univ8250_port_base_ops->config_port(port, flags); + + if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA) + rsa8250_release_resource(up); +} + +static int univ8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + int ret; + + ret = univ8250_port_base_ops->request_port(port); + if (ret == 0 && port->type == PORT_RSA) { + ret = rsa8250_request_resource(up); + if (ret < 0) + univ8250_port_base_ops->release_port(port); + } + + return ret; +} + +static void univ8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + if (port->type == PORT_RSA) + rsa8250_release_resource(up); + univ8250_port_base_ops->release_port(port); +} + +void univ8250_rsa_support(struct uart_ops *ops) +{ + ops->config_port = univ8250_config_port; + ops->request_port = univ8250_request_port; + ops->release_port = univ8250_release_port; +} + +module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444); +MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); + +#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS +#ifndef MODULE +/* + * Keep the old "8250" name working as well for the module options so we don't + * break people. We need to keep the names identical and the convenient macros + * will happily refuse to let us do that by failing the build with redefinition + * errors of global variables. So we stick them inside a dummy function to + * avoid those conflicts. The options still get parsed, and the redefined + * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. + * + * This is hacky. I'm sorry. + */ +static void __used rsa8250_options(void) +{ +#undef MODULE_PARAM_PREFIX +#define MODULE_PARAM_PREFIX "8250_core." + + __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, + ¶m_array_ops, .arr = &__param_arr_probe_rsa, + 0444, -1, 0); +} +#endif +#endif diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 69ac00270547..1516de629b61 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -3,9 +3,13 @@ # Makefile for the 8250 serial device drivers. # -obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o +obj-$(CONFIG_SERIAL_8250) += 8250.o 8250-y := 8250_core.o +8250-y += 8250_platform.o 8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +8250-$(CONFIG_SERIAL_8250_RSA) += 8250_rsa.o + +obj-$(CONFIG_SERIAL_8250) += 8250_base.o 8250_base-y := 8250_port.o 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o 8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 2eb22594960f..f5cfe5571e0e 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -264,6 +264,11 @@ static const struct of_device_id imx_uart_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, imx_uart_dt_ids); +static inline struct imx_port *to_imx_port(struct uart_port *port) +{ + return container_of(port, struct imx_port, port); +} + static inline void imx_uart_writel(struct imx_port *sport, u32 val, u32 offset) { writel(val, sport->port.membase + offset); @@ -377,7 +382,7 @@ static void imx_uart_disable_loopback_rs485(struct imx_port *sport) /* called with port.lock taken and irqs off */ static void imx_uart_start_rx(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned int ucr1, ucr2; ucr1 = imx_uart_readl(sport, UCR1); @@ -401,7 +406,7 @@ static void imx_uart_start_rx(struct uart_port *port) /* called with port.lock taken and irqs off */ static void imx_uart_stop_tx(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); u32 ucr1, ucr4, usr2; if (sport->tx_state == OFF) @@ -466,7 +471,7 @@ static void imx_uart_stop_tx(struct uart_port *port) static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); u32 ucr1, ucr2, ucr4, uts; ucr1 = imx_uart_readl(sport, UCR1); @@ -511,7 +516,7 @@ static void imx_uart_stop_rx(struct uart_port *port) /* called with port.lock taken and irqs off */ static void imx_uart_enable_ms(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); mod_timer(&sport->timer, jiffies); @@ -662,7 +667,7 @@ static void imx_uart_dma_tx(struct imx_port *sport) /* called with port.lock taken and irqs off */ static void imx_uart_start_tx(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); struct tty_port *tport = &sport->port.state->port; u32 ucr1; @@ -1043,7 +1048,7 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id) */ static unsigned int imx_uart_tx_empty(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned int ret; ret = (imx_uart_readl(sport, USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; @@ -1058,7 +1063,7 @@ static unsigned int imx_uart_tx_empty(struct uart_port *port) /* called with port.lock taken and irqs off */ static unsigned int imx_uart_get_mctrl(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned int ret = imx_uart_get_hwmctrl(sport); mctrl_gpio_get(sport->gpios, &ret); @@ -1069,7 +1074,7 @@ static unsigned int imx_uart_get_mctrl(struct uart_port *port) /* called with port.lock taken and irqs off */ static void imx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); u32 ucr3, uts; if (!(port->rs485.flags & SER_RS485_ENABLED)) { @@ -1112,7 +1117,7 @@ static void imx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) */ static void imx_uart_break_ctl(struct uart_port *port, int break_state) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned long flags; u32 ucr1; @@ -1434,7 +1439,7 @@ static void imx_uart_disable_dma(struct imx_port *sport) static int imx_uart_startup(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); int retval; unsigned long flags; int dma_is_inited = 0; @@ -1548,7 +1553,7 @@ static int imx_uart_startup(struct uart_port *port) static void imx_uart_shutdown(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned long flags; u32 ucr1, ucr2, ucr4, uts; @@ -1622,7 +1627,7 @@ static void imx_uart_shutdown(struct uart_port *port) /* called with port.lock taken and irqs off */ static void imx_uart_flush_buffer(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); struct scatterlist *sgl = &sport->tx_sgl[0]; if (!sport->dma_chan_tx) @@ -1649,7 +1654,7 @@ static void imx_uart_set_termios(struct uart_port *port, struct ktermios *termios, const struct ktermios *old) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned long flags; u32 ucr2, old_ucr2, ufcr; unsigned int baud, quot; @@ -1852,7 +1857,7 @@ imx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) static int imx_uart_poll_init(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned long flags; u32 ucr1, ucr2; int retval; @@ -1901,7 +1906,7 @@ static int imx_uart_poll_init(struct uart_port *port) static int imx_uart_poll_get_char(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); if (!(imx_uart_readl(sport, USR2) & USR2_RDR)) return NO_POLL_CHAR; @@ -1910,7 +1915,7 @@ static int imx_uart_poll_get_char(struct uart_port *port) static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); unsigned int status; /* drain */ @@ -1932,7 +1937,7 @@ static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c) static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termios, struct serial_rs485 *rs485conf) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); u32 ucr2; if (rs485conf->flags & SER_RS485_ENABLED) { @@ -1986,7 +1991,7 @@ static struct imx_port *imx_uart_ports[UART_NR]; #if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE) static void imx_uart_console_putchar(struct uart_port *port, unsigned char ch) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = to_imx_port(port); while (imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL) barrier(); diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 67a5fc70bb4b..0f463da5e7ce 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -1382,44 +1382,29 @@ static inline struct console *SUNSU_CONSOLE(void) static enum su_type su_get_type(struct device_node *dp) { - struct device_node *ap = of_find_node_by_path("/aliases"); - enum su_type rc = SU_PORT_PORT; + struct device_node *ap __free(device_node) = + of_find_node_by_path("/aliases"); if (ap) { const char *keyb = of_get_property(ap, "keyboard", NULL); const char *ms = of_get_property(ap, "mouse", NULL); - struct device_node *match; if (keyb) { - match = of_find_node_by_path(keyb); + struct device_node *match __free(device_node) = + of_find_node_by_path(keyb); - /* - * The pointer is used as an identifier not - * as a pointer, we can drop the refcount on - * the of__node immediately after getting it. - */ - of_node_put(match); - - if (dp == match) { - rc = SU_PORT_KBD; - goto out; - } + if (dp == match) + return SU_PORT_KBD; } if (ms) { - match = of_find_node_by_path(ms); + struct device_node *match __free(device_node) = + of_find_node_by_path(ms); - of_node_put(match); - - if (dp == match) { - rc = SU_PORT_MS; - goto out; - } + if (dp == match) + return SU_PORT_MS; } } - -out: - of_node_put(ap); - return rc; + return SU_PORT_PORT; } static int su_probe(struct platform_device *op) diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index a2116e135a82..804355da46f5 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -1033,9 +1033,7 @@ static int kbd_led_trigger_activate(struct led_classdev *cdev) tasklet_disable(&keyboard_tasklet); if (ledstate != -1U) - led_trigger_event(&trigger->trigger, - ledstate & trigger->mask ? - LED_FULL : LED_OFF); + led_set_brightness(cdev, ledstate & trigger->mask ? LED_FULL : LED_OFF); tasklet_enable(&keyboard_tasklet); return 0; |