diff options
24 files changed, 312 insertions, 289 deletions
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt index d90e17e2428b..a9a2f2fc44f2 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -14,6 +14,8 @@ Optional properties: - label: symbolic name for the connector, - type: size of the connector, should be specified in case of USB-A, USB-B non-fullsize connectors: "mini", "micro". +- self-powered: Set this property if the usb device that has its own power + source. Optional properties for usb-c-connector: - power-role: should be one of "source", "sink" or "dual"(DRP) if typec diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt index c7e985f05d8f..f901ec77439c 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.txt @@ -119,5 +119,5 @@ If a deauthorized interface will be authorized so the driver probing must be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe For drivers that need multiple interfaces all needed interfaces should be -authroized first. After that the drivers should be probed. +authorized first. After that the drivers should be probed. This avoids side effects. diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c index 464fe93657b5..87cbf18d0305 100644 --- a/drivers/platform/x86/intel_cht_int33fe.c +++ b/drivers/platform/x86/intel_cht_int33fe.c @@ -79,7 +79,7 @@ static const struct property_entry max17047_props[] = { }; static const struct property_entry fusb302_props[] = { - PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000), PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000), PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000), diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f76b2e0aba9d..1d1e61e980f3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1112,6 +1112,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_ENABLE); } + /* + * Add debounce if USB3 link is in polling/link training state. + * Link will automatically transition to Enabled state after + * link training completes. + */ + if (hub_is_superspeed(hdev) && + ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_POLLING)) + need_debounce_delay = true; + /* Clear status-change flags; we'll debounce later */ if (portchange & USB_PORT_STAT_C_CONNECTION) { need_debounce_delay = true; diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index d633c2abe5a4..ea0d531c63e2 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -631,28 +631,28 @@ static int ehci_reset_port(int port) if (!(portsc & PORT_RESET)) break; } - if (portsc & PORT_RESET) { - /* force reset to complete */ - loop = 100 * 1000; - writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), - &ehci_regs->port_status[port - 1]); - do { - udelay(1); - portsc = readl(&ehci_regs->port_status[port-1]); - } while ((portsc & PORT_RESET) && (--loop > 0)); - } + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 100 * 1000; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + udelay(1); + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } - /* Device went away? */ - if (!(portsc & PORT_CONNECT)) - return -ENOTCONN; + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; - /* bomb out completely if something weird happened */ - if ((portsc & PORT_CSC)) - return -EINVAL; + /* bomb out completely if something weird happened */ + if ((portsc & PORT_CSC)) + return -EINVAL; - /* If we've finished resetting, then break out of the loop */ - if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) - return 0; + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; return -EBUSY; } diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index afaea11ec771..55c8c8abeacd 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -1330,7 +1330,7 @@ static void pch_vbus_gpio_work_rise(struct work_struct *irq_work) } /** - * pch_vbus_gpio_irq() - IRQ handler for GPIO intrerrupt for changing VBUS + * pch_vbus_gpio_irq() - IRQ handler for GPIO interrupt for changing VBUS * @irq: Interrupt request number * @dev: Reference to the device structure * diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index b3da3f12e5b1..3965ac0341eb 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -57,14 +57,10 @@ static int ohci_mem_init (struct ohci_hcd *ohci) static void ohci_mem_cleanup (struct ohci_hcd *ohci) { - if (ohci->td_cache) { - dma_pool_destroy (ohci->td_cache); - ohci->td_cache = NULL; - } - if (ohci->ed_cache) { - dma_pool_destroy (ohci->ed_cache); - ohci->ed_cache = NULL; - } + dma_pool_destroy(ohci->td_cache); + ohci->td_cache = NULL; + dma_pool_destroy(ohci->ed_cache); + ohci->ed_cache = NULL; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 94aca1b5ac8a..c7601750c37f 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -714,13 +714,6 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, } } -/* Updates Link Status for USB 2.1 port */ -static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg) -{ - if ((status_reg & PORT_PLS_MASK) == XDEV_U2) - *status |= USB_PORT_STAT_L1; -} - /* Updates Link Status for super Speed port */ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 *status, u32 status_reg) @@ -802,6 +795,100 @@ static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, } } +static int xhci_handle_usb2_port_link_resume(struct xhci_port *port, + u32 *status, u32 portsc, + unsigned long flags) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + int slot_id; + u32 wIndex; + + hcd = port->rhub->hcd; + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(hcd); + wIndex = port->hcd_portnum; + + if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) { + *status = 0xffffffff; + return -EINVAL; + } + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + usb_hcd_start_port_resume(&hcd->self, wIndex); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) { + int time_left; + + xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); + + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); + + spin_unlock_irqrestore(&xhci->lock, flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS)); + spin_lock_irqsave(&xhci->lock, flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + *status = 0xffffffff; + return -ENODEV; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = readl(port->addr); + + xhci_warn(xhci, "Port resume %i msec timed out, portsc = 0x%x\n", + XHCI_MAX_REXIT_TIMEOUT_MS, + port_status); + *status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); + } + + usb_hcd_end_port_resume(&hcd->self, wIndex); + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. + */ + *status |= USB_PORT_STAT_SUSPEND; + } + return 0; +} + static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) { u32 ext_stat = 0; @@ -818,6 +905,85 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) return ext_stat; } +static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, + u32 portsc) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + u32 link_state; + u32 portnum; + + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(port->rhub->hcd); + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB3 specific wPortChange bits + * + * Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + + if (portsc & PORT_PLC && (link_state != XDEV_RESUME)) + *status |= USB_PORT_STAT_C_LINK_STATE << 16; + if (portsc & PORT_WRC) + *status |= USB_PORT_STAT_C_BH_RESET << 16; + if (portsc & PORT_CEC) + *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; + + /* USB3 specific wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_SS_PORT_STAT_POWER; + /* link state handling */ + if (link_state == XDEV_U0) + bus_state->suspended_ports &= ~(1 << portnum); + } + + xhci_hub_report_usb3_link_state(xhci, status, portsc); + xhci_del_comp_mod_timer(xhci, portsc, portnum); +} + +static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, + u32 portsc, unsigned long flags) +{ + struct xhci_bus_state *bus_state; + u32 link_state; + u32 portnum; + int ret; + + bus_state = &port->rhub->bus_state; + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB2 wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_PORT_STAT_POWER; + + /* link state is only valid if port is powered */ + if (link_state == XDEV_U3) + *status |= USB_PORT_STAT_SUSPEND; + if (link_state == XDEV_U2) + *status |= USB_PORT_STAT_L1; + if (link_state == XDEV_U0) { + bus_state->resume_done[portnum] = 0; + clear_bit(portnum, &bus_state->resuming_ports); + if (bus_state->suspended_ports & (1 << portnum)) { + bus_state->suspended_ports &= ~(1 << portnum); + bus_state->port_c_suspend |= 1 << portnum; + } + } + if (link_state == XDEV_RESUME) { + ret = xhci_handle_usb2_port_link_resume(port, status, + portsc, flags); + if (ret) + return; + } + } +} + /* * Converts a raw xHCI port status into the format that external USB 2.0 or USB * 3.0 hubs use. @@ -835,16 +1001,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, __releases(&xhci->lock) __acquires(&xhci->lock) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; - int slot_id; struct xhci_hub *rhub; struct xhci_port *port; rhub = xhci_get_rhub(hcd); port = rhub->ports[wIndex]; - /* wPortChange bits */ + /* common wPortChange bits */ if (raw_port_status & PORT_CSC) status |= USB_PORT_STAT_C_CONNECTION << 16; if (raw_port_status & PORT_PEC) @@ -853,107 +1017,25 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_OVERCURRENT << 16; if ((raw_port_status & PORT_RC)) status |= USB_PORT_STAT_C_RESET << 16; - /* USB3.0 only */ - if (hcd->speed >= HCD_USB3) { - /* Port link change with port in resume state should not be - * reported to usbcore, as this is an internal state to be - * handled by xhci driver. Reporting PLC to usbcore may - * cause usbcore clearing PLC first and port change event - * irq won't be generated. - */ - if ((raw_port_status & PORT_PLC) && - (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) - status |= USB_PORT_STAT_C_LINK_STATE << 16; - if ((raw_port_status & PORT_WRC)) - status |= USB_PORT_STAT_C_BH_RESET << 16; - if ((raw_port_status & PORT_CEC)) - status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; - } - if (hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3 - && (raw_port_status & PORT_POWER)) - status |= USB_PORT_STAT_SUSPEND; + /* common wPortStatus bits */ + if (raw_port_status & PORT_CONNECT) { + status |= USB_PORT_STAT_CONNECTION; + status |= xhci_port_speed(raw_port_status); } - if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_RESET) || - !(raw_port_status & PORT_PE)) - return 0xffffffff; - /* did port event handler already start resume timing? */ - if (!bus_state->resume_done[wIndex]) { - /* If not, maybe we are in a host initated resume? */ - if (test_bit(wIndex, &bus_state->resuming_ports)) { - /* Host initated resume doesn't time the resume - * signalling using resume_done[]. - * It manually sets RESUME state, sleeps 20ms - * and sets U0 state. This should probably be - * changed, but not right now. - */ - } else { - /* port resume was discovered now and here, - * start resume timing - */ - unsigned long timeout = jiffies + - msecs_to_jiffies(USB_RESUME_TIMEOUT); - - set_bit(wIndex, &bus_state->resuming_ports); - bus_state->resume_done[wIndex] = timeout; - mod_timer(&hcd->rh_timer, timeout); - usb_hcd_start_port_resume(&hcd->self, wIndex); - } - /* Has resume been signalled for USB_RESUME_TIME yet? */ - } else if (time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { - int time_left; - - xhci_dbg(xhci, "Resume USB2 port %d\n", - wIndex + 1); - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - - set_bit(wIndex, &bus_state->rexit_ports); - - xhci_test_and_clear_bit(xhci, port, PORT_PLC); - xhci_set_link_state(xhci, port, XDEV_U0); - - spin_unlock_irqrestore(&xhci->lock, flags); - time_left = wait_for_completion_timeout( - &bus_state->rexit_done[wIndex], - msecs_to_jiffies( - XHCI_MAX_REXIT_TIMEOUT_MS)); - spin_lock_irqsave(&xhci->lock, flags); - - if (time_left) { - slot_id = xhci_find_slot_id_by_port(hcd, - xhci, wIndex + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - return 0xffffffff; - } - xhci_ring_device(xhci, slot_id); - } else { - int port_status = readl(port->addr); - xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", - XHCI_MAX_REXIT_TIMEOUT_MS, - port_status); - status |= USB_PORT_STAT_SUSPEND; - clear_bit(wIndex, &bus_state->rexit_ports); - } + if (raw_port_status & PORT_PE) + status |= USB_PORT_STAT_ENABLE; + if (raw_port_status & PORT_OC) + status |= USB_PORT_STAT_OVERCURRENT; + if (raw_port_status & PORT_RESET) + status |= USB_PORT_STAT_RESET; - usb_hcd_end_port_resume(&hcd->self, wIndex); - bus_state->port_c_suspend |= 1 << wIndex; - bus_state->suspended_ports &= ~(1 << wIndex); - } else { - /* - * The resume has been signaling for less than - * USB_RESUME_TIME. Report the port status as SUSPEND, - * let the usbcore check port status again and clear - * resume signaling later. - */ - status |= USB_PORT_STAT_SUSPEND; - } - } + /* USB2 and USB3 specific bits, including Port Link State */ + if (hcd->speed >= HCD_USB3) + xhci_get_usb3_port_status(port, &status, raw_port_status); + else + xhci_get_usb2_port_status(port, &status, raw_port_status, + flags); /* * Clear stale usb2 resume signalling variables in case port changed * state during resume signalling. For example on error @@ -967,44 +1049,6 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, usb_hcd_end_port_resume(&hcd->self, wIndex); } - - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && - (raw_port_status & PORT_POWER)) { - if (bus_state->suspended_ports & (1 << wIndex)) { - bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed < HCD_USB3) - bus_state->port_c_suspend |= 1 << wIndex; - } - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - } - if (raw_port_status & PORT_CONNECT) { - status |= USB_PORT_STAT_CONNECTION; - status |= xhci_port_speed(raw_port_status); - } - if (raw_port_status & PORT_PE) - status |= USB_PORT_STAT_ENABLE; - if (raw_port_status & PORT_OC) - status |= USB_PORT_STAT_OVERCURRENT; - if (raw_port_status & PORT_RESET) - status |= USB_PORT_STAT_RESET; - if (raw_port_status & PORT_POWER) { - if (hcd->speed >= HCD_USB3) - status |= USB_SS_PORT_STAT_POWER; - else - status |= USB_PORT_STAT_POWER; - } - /* Update Port Link State */ - if (hcd->speed >= HCD_USB3) { - xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status); - /* - * Verify if all USB3 Ports Have entered U0 already. - * Delete Compliance Mode Timer if so. - */ - xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex); - } else { - xhci_hub_report_usb2_link_state(&status, raw_port_status); - } if (bus_state->port_c_suspend & (1 << wIndex)) status |= USB_PORT_STAT_C_SUSPEND << 16; @@ -1031,7 +1075,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; spin_lock_irqsave(&xhci->lock, flags); switch (typeReq) { @@ -1421,7 +1465,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; /* Initial status is no changes */ retval = (max_ports + 8) / 8; @@ -1480,7 +1524,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); @@ -1622,7 +1666,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; if (time_before(jiffies, bus_state->next_statechange)) msleep(5); @@ -1723,13 +1767,10 @@ int xhci_bus_resume(struct usb_hcd *hcd) unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct xhci_bus_state *bus_state; - - bus_state = &xhci->bus_state[hcd_index(hcd)]; + struct xhci_hub *rhub = xhci_get_rhub(hcd); /* USB3 port wakeups are reported via usb_wakeup_notification() */ - return bus_state->resuming_ports; /* USB2 ports only */ + return rhub->bus_state.resuming_ports; /* USB2 ports only */ } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index b1f27aa38b10..36a3eb8849f1 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1922,8 +1922,8 @@ no_bw: xhci->page_size = 0; xhci->page_shift = 0; - xhci->bus_state[0].bus_suspended = 0; - xhci->bus_state[1].bus_suspended = 0; + xhci->usb2_rhub.bus_state.bus_suspended = 0; + xhci->usb3_rhub.bus_state.bus_suspended = 0; } static int xhci_test_trb_in_td(struct xhci_hcd *xhci, @@ -2181,23 +2181,11 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, if (major_revision < 0x03 && xhci->num_ext_caps < max_caps) xhci->ext_caps[xhci->num_ext_caps++] = temp; - /* Check the host's USB2 LPM capability */ - if ((xhci->hci_version == 0x96) && (major_revision != 0x03) && - (temp & XHCI_L1C)) { + if ((xhci->hci_version >= 0x100) && (major_revision != 0x03) && + (temp & XHCI_HLC)) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 0.96: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - } - - if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - if (temp & XHCI_HLC) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 hardware lpm"); - xhci->hw_lpm_support = 1; - } + "xHCI 1.0: support USB2 hardware lpm"); + xhci->hw_lpm_support = 1; } port_offset--; @@ -2536,10 +2524,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < MAX_HC_SLOTS; i++) xhci->devs[i] = NULL; for (i = 0; i < USB_MAXCHILDREN; i++) { - xhci->bus_state[0].resume_done[i] = 0; - xhci->bus_state[1].resume_done[i] = 0; + xhci->usb2_rhub.bus_state.resume_done[i] = 0; + xhci->usb3_rhub.bus_state.resume_done[i] = 0; /* Only the USB 2.0 completions will ever be used. */ - init_completion(&xhci->bus_state[1].rexit_done[i]); + init_completion(&xhci->usb2_rhub.bus_state.rexit_done[i]); } if (scratchpad_alloc(xhci, flags)) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 65750582133f..40fa25c4d041 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1593,7 +1593,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } hcd = port->rhub->hcd; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &port->rhub->bus_state; hcd_portnum = port->hcd_portnum; portsc = readl(port->addr); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index dae3be1b9c8f..46ab9c041091 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -169,7 +169,7 @@ int xhci_reset(struct xhci_hcd *xhci) { u32 command; u32 state; - int ret, i; + int ret; state = readl(&xhci->op_regs->status); @@ -215,11 +215,12 @@ int xhci_reset(struct xhci_hcd *xhci) ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, 10 * 1000 * 1000); - for (i = 0; i < 2; i++) { - xhci->bus_state[i].port_c_suspend = 0; - xhci->bus_state[i].suspended_ports = 0; - xhci->bus_state[i].resuming_ports = 0; - } + xhci->usb2_rhub.bus_state.port_c_suspend = 0; + xhci->usb2_rhub.bus_state.suspended_ports = 0; + xhci->usb2_rhub.bus_state.resuming_ports = 0; + xhci->usb3_rhub.bus_state.port_c_suspend = 0; + xhci->usb3_rhub.bus_state.suspended_ports = 0; + xhci->usb3_rhub.bus_state.resuming_ports = 0; return ret; } @@ -1087,9 +1088,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. */ - if (time_before(jiffies, xhci->bus_state[0].next_statechange) || - time_before(jiffies, - xhci->bus_state[1].next_statechange)) + + if (time_before(jiffies, xhci->usb2_rhub.bus_state.next_statechange) || + time_before(jiffies, xhci->usb3_rhub.bus_state.next_statechange)) msleep(100); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -4388,8 +4389,7 @@ static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int portnum = udev->portnum - 1; - if (hcd->speed >= HCD_USB3 || !xhci->sw_lpm_support || - !udev->lpm_capable) + if (hcd->speed >= HCD_USB3 || !udev->lpm_capable) return 0; /* we only support lpm for non-hub device connected to root hub yet */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index c3515bad5dbb..a1638f2aa338 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1682,13 +1682,6 @@ struct xhci_bus_state { */ #define XHCI_MAX_REXIT_TIMEOUT_MS 20 -static inline unsigned int hcd_index(struct usb_hcd *hcd) -{ - if (hcd->speed >= HCD_USB3) - return 0; - else - return 1; -} struct xhci_port { __le32 __iomem *addr; int hw_portnum; @@ -1700,6 +1693,8 @@ struct xhci_hub { struct xhci_port **ports; unsigned int num_ports; struct usb_hcd *hcd; + /* keep track of bus suspend info */ + struct xhci_bus_state bus_state; /* supported prococol extended capabiliy values */ u8 maj_rev; u8 min_rev; @@ -1854,13 +1849,9 @@ struct xhci_hcd { unsigned int num_active_eps; unsigned int limit_active_eps; - /* There are two roothubs to keep track of bus suspend info for */ - struct xhci_bus_state bus_state[2]; struct xhci_port *hw_ports; struct xhci_hub usb2_rhub; struct xhci_hub usb3_rhub; - /* support xHCI 0.96 spec USB2 software LPM */ - unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; /* cached usb2 extened protocol capabilites */ diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 39ca31b4de46..ac92725458b5 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -69,7 +69,6 @@ struct appledisplay { struct delayed_work work; int button_pressed; - spinlock_t lock; struct mutex sysfslock; /* concurrent read and write */ }; @@ -79,7 +78,6 @@ static void appledisplay_complete(struct urb *urb) { struct appledisplay *pdata = urb->context; struct device *dev = &pdata->udev->dev; - unsigned long flags; int status = urb->status; int retval; @@ -105,8 +103,6 @@ static void appledisplay_complete(struct urb *urb) goto exit; } - spin_lock_irqsave(&pdata->lock, flags); - switch(pdata->urbdata[1]) { case ACD_BTN_BRIGHT_UP: case ACD_BTN_BRIGHT_DOWN: @@ -119,8 +115,6 @@ static void appledisplay_complete(struct urb *urb) break; } - spin_unlock_irqrestore(&pdata->lock, flags); - exit: retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); if (retval) { @@ -229,7 +223,6 @@ static int appledisplay_probe(struct usb_interface *iface, pdata->udev = udev; - spin_lock_init(&pdata->lock); INIT_DELAYED_WORK(&pdata->work, appledisplay_work); mutex_init(&pdata->sysfslock); @@ -261,6 +254,7 @@ static int appledisplay_probe(struct usb_interface *iface, usb_rcvintpipe(udev, int_in_endpointAddr), pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete, pdata, 1); + pdata->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; if (usb_submit_urb(pdata->urb, GFP_KERNEL)) { retval = -EIO; dev_err(&iface->dev, "Submitting URB failed\n"); diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index ae70b9bfd797..4fee200795a5 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -180,7 +180,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_LV1IESR, value); /* Enable U2 common USB interrupts */ - value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR; + value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); if (mtu->is_u3_ip) { @@ -484,7 +484,7 @@ void mtu3_ep0_setup(struct mtu3 *mtu) mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); /* Enable EP0 interrupt */ - mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR); + mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR); } static int mtu3_mem_alloc(struct mtu3 *mtu) @@ -578,12 +578,16 @@ static void mtu3_regs_init(struct mtu3 *mtu) if (mtu->is_u3_ip) { /* disable LGO_U1/U2 by default */ mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL, - SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE | SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE); + /* enable accept LGO_U1/U2 link command from host */ + mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL, + SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE); /* device responses to u3_exit from host automatically */ mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); /* automatically build U2 link when U3 detect fail */ mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH); + /* auto clear SOFT_CONN when clear USB3_EN if work as HS */ + mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN); } mtu3_set_speed(mtu); @@ -592,10 +596,10 @@ static void mtu3_regs_init(struct mtu3 *mtu) mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK); /* U2/U3 detected by HW */ mtu3_writel(mbase, U3D_DEVICE_CONF, 0); - /* enable QMU 16B checksum */ - mtu3_setbits(mbase, U3D_QCR0, QMU_CS16B_EN); /* vbus detected by HW */ mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON); + /* enable automatical HWRW from L1 */ + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE); } static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) @@ -708,12 +712,6 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) if (u2comm & RESET_INTR) mtu3_gadget_reset(mtu); - if (u2comm & LPM_RESUME_INTR) { - if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE)) - mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL, - LPM_U3_ACK_EN); - } - return IRQ_HANDLED; } diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index 25216e79cd6e..7cb7ac980446 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -336,9 +336,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U1_ACCEPT_ENABLE; + lpc |= SW_U1_REQUEST_ENABLE; else - lpc &= ~SW_U1_ACCEPT_ENABLE; + lpc &= ~SW_U1_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u1_enable = !!set; @@ -351,9 +351,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U2_ACCEPT_ENABLE; + lpc |= SW_U2_REQUEST_ENABLE; else - lpc &= ~SW_U2_ACCEPT_ENABLE; + lpc &= ~SW_U2_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u2_enable = !!set; @@ -692,9 +692,13 @@ irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu) mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */ /* only handle ep0's */ - if (!(int_status & EP0ISR)) + if (!(int_status & (EP0ISR | SETUPENDISR))) return IRQ_NONE; + /* abort current SETUP, and process new one */ + if (int_status & SETUPENDISR) + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + csr = mtu3_readl(mbase, U3D_EP0CSR); dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr); diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h index a45bb253939f..1d65b7476f23 100644 --- a/drivers/usb/mtu3/mtu3_hw_regs.h +++ b/drivers/usb/mtu3/mtu3_hw_regs.h @@ -104,6 +104,7 @@ /* U3D_EPISR */ #define EPRISR(x) (BIT(16) << (x)) +#define SETUPENDISR BIT(16) #define EPTISR(x) (BIT(0) << (x)) #define EP0ISR BIT(0) @@ -267,6 +268,8 @@ #define U3D_LTSSM_INTR_ENABLE (SSUSB_USB3_MAC_CSR_BASE + 0x013C) #define U3D_LTSSM_INTR (SSUSB_USB3_MAC_CSR_BASE + 0x0140) +#define U3D_U3U2_SWITCH_CTRL (SSUSB_USB3_MAC_CSR_BASE + 0x0170) + /*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/ /* U3D_LTSSM_CTRL */ @@ -301,6 +304,9 @@ #define SS_DISABLE_INTR BIT(1) #define SS_INACTIVE_INTR BIT(0) +/* U3D_U3U2_SWITCH_CTRL */ +#define SOFTCON_CLR_AUTO_EN BIT(0) + /*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/ #define U3D_LINK_UX_INACT_TIMER (SSUSB_USB3_SYS_CSR_BASE + 0x020C) diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index 46551f6d16fd..e086630e41a9 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb) mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); udelay(1); mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); + + /* + * device ip may be powered on in firmware/BROM stage before entering + * kernel stage; + * power down device ip, otherwise ip-sleep will fail when working as + * host only mode + */ + mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); } /* ignore the error if the clock does not exist */ diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c index ff62ba232177..73ac042c45a8 100644 --- a/drivers/usb/mtu3/mtu3_qmu.c +++ b/drivers/usb/mtu3/mtu3_qmu.c @@ -154,27 +154,6 @@ void mtu3_gpd_ring_free(struct mtu3_ep *mep) memset(ring, 0, sizeof(*ring)); } -/* - * calculate check sum of a gpd or bd - * add "noinline" and "mb" to prevent wrong calculation - */ -static noinline u8 qmu_calc_checksum(u8 *data) -{ - u8 chksum = 0; - int i; - - data[1] = 0x0; /* set checksum to 0 */ - - mb(); /* ensure the gpd/bd is really up-to-date */ - for (i = 0; i < QMU_CHECKSUM_LEN; i++) - chksum += data[i]; - - /* Default: HWO=1, @flag[bit0] */ - chksum += 1; - - return 0xFF - chksum; -} - void mtu3_qmu_resume(struct mtu3_ep *mep) { struct mtu3 *mtu = mep->mtu; @@ -260,7 +239,6 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) if (req->zero) gpd->ext_flag |= GPD_EXT_FLAG_ZLP; - gpd->chksum = qmu_calc_checksum((u8 *)gpd); gpd->flag |= GPD_FLAGS_HWO; mreq->gpd = gpd; @@ -295,7 +273,6 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma)); ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma)); gpd->rx_ext_addr = cpu_to_le16(ext_addr); - gpd->chksum = qmu_calc_checksum((u8 *)gpd); gpd->flag |= GPD_FLAGS_HWO; mreq->gpd = gpd; @@ -323,7 +300,6 @@ int mtu3_qmu_start(struct mtu3_ep *mep) /* set QMU start address */ write_txq_start_addr(mbase, epnum, ring->dma); mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_DMAREQEN); - mtu3_setbits(mbase, U3D_QCR0, QMU_TX_CS_EN(epnum)); /* send zero length packet according to ZLP flag in GPD */ mtu3_setbits(mbase, U3D_QCR1, QMU_TX_ZLP(epnum)); mtu3_writel(mbase, U3D_TQERRIESR0, @@ -338,7 +314,6 @@ int mtu3_qmu_start(struct mtu3_ep *mep) } else { write_rxq_start_addr(mbase, epnum, ring->dma); mtu3_setbits(mbase, MU3D_EP_RXCR0(epnum), RX_DMAREQEN); - mtu3_setbits(mbase, U3D_QCR0, QMU_RX_CS_EN(epnum)); /* don't expect ZLP */ mtu3_clrbits(mbase, U3D_QCR3, QMU_RX_ZLP(epnum)); /* move to next GPD when receive ZLP */ @@ -441,7 +416,6 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum) /* by pass the current GDP */ gpd_current->flag |= GPD_FLAGS_BPS; - gpd_current->chksum = qmu_calc_checksum((u8 *)gpd_current); gpd_current->flag |= GPD_FLAGS_HWO; /*enable DMAREQEN, switch back to QMU mode */ diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 4d261e4de9ad..c26129d5b943 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1131,7 +1131,7 @@ static int ms_lib_alloc_writebuf(struct us_data *us) ms_lib_clear_writebuf(us); -return 0; + return 0; } static int ms_lib_force_setlogical_pair(struct us_data *us, u16 logblk, u16 phyblk) diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 43b64d9309d0..e9344997329c 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1765,7 +1765,7 @@ static int fusb302_probe(struct i2c_client *client, * to be set by the platform code which also registers the i2c client * for the fusb302. */ - if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) { + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { chip->extcon = extcon_get_extcon_dev(name); if (!chip->extcon) return -EPROBE_DEFER; diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index dbbd71f754d0..3620efee2688 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -317,6 +317,9 @@ struct tcpm_port { /* Deadline in jiffies to exit src_try_wait state */ unsigned long max_wait; + /* port belongs to a self powered device */ + bool self_powered; + #ifdef CONFIG_DEBUG_FS struct dentry *dentry; struct mutex logbuffer_lock; /* log buffer access lock */ @@ -3254,7 +3257,8 @@ static void run_state_machine(struct tcpm_port *port) case SRC_HARD_RESET_VBUS_OFF: tcpm_set_vconn(port, true); tcpm_set_vbus(port, false); - tcpm_set_roles(port, false, TYPEC_SOURCE, TYPEC_HOST); + tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE, + TYPEC_HOST); tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER); break; case SRC_HARD_RESET_VBUS_ON: @@ -3266,8 +3270,10 @@ static void run_state_machine(struct tcpm_port *port) case SNK_HARD_RESET_SINK_OFF: memset(&port->pps_data, 0, sizeof(port->pps_data)); tcpm_set_vconn(port, false); - tcpm_set_charge(port, false); - tcpm_set_roles(port, false, TYPEC_SINK, TYPEC_DEVICE); + if (port->pd_capable) + tcpm_set_charge(port, false); + tcpm_set_roles(port, port->self_powered, TYPEC_SINK, + TYPEC_DEVICE); /* * VBUS may or may not toggle, depending on the adapter. * If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON @@ -3297,6 +3303,12 @@ static void run_state_machine(struct tcpm_port *port) * Similar, dual-mode ports in source mode should transition * to PE_SNK_Transition_to_default. */ + if (port->pd_capable) { + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + tcpm_set_charge(port, true); + } tcpm_set_attached_state(port, true); tcpm_set_state(port, SNK_STARTUP, 0); break; @@ -4412,6 +4424,8 @@ sink: return -EINVAL; port->operating_snk_mw = mw / 1000; + port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); + return 0; } @@ -4720,6 +4734,7 @@ static int tcpm_copy_caps(struct tcpm_port *port, port->typec_caps.prefer_role = tcfg->default_role; port->typec_caps.type = tcfg->type; port->typec_caps.data = tcfg->data; + port->self_powered = port->tcpc->config->self_powered; return 0; } diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index c0430a41e24b..b1b466cbc33e 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -309,7 +309,7 @@ int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size) if (result < 0) { dev_err(dev, "%s: cannot submit NEEP read: %d\n", cmd_name, result); - goto error_submit_ep1; + goto error_submit_ep1; } /* Now post the command on EP0 */ result = usb_control_msg( diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 97e2ddec18b1..7dc3a411bece 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -235,11 +235,6 @@ static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus) return container_of(bus, struct usb_hcd, self); } -struct hcd_timeout { /* timeouts we allocate */ - struct list_head timeout_list; - struct timer_list timer; -}; - /*-------------------------------------------------------------------------*/ diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index 7e7fbfb84e8e..50c74a77db55 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -89,6 +89,7 @@ struct tcpc_config { enum typec_port_data data; enum typec_role default_role; bool try_role_hw; /* try.{src,snk} implemented in hardware */ + bool self_powered; /* port belongs to a self powered device */ const struct typec_altmode_desc *alt_modes; }; |