diff options
| -rw-r--r-- | drivers/net/phy/marvell.c | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index fae7eb57ee2c..7c00f47e4ded 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -279,6 +279,23 @@ #define MII_VCT7_CTRL_METERS BIT(10) #define MII_VCT7_CTRL_CENTIMETERS 0 +#define MII_VCT_TXPINS 0x1A +#define MII_VCT_RXPINS 0x1B +#define MII_VCT_TXPINS_ENVCT BIT(15) +#define MII_VCT_TXRXPINS_VCTTST GENMASK(14, 13) +#define MII_VCT_TXRXPINS_VCTTST_SHIFT 13 +#define MII_VCT_TXRXPINS_VCTTST_OK 0 +#define MII_VCT_TXRXPINS_VCTTST_SHORT 1 +#define MII_VCT_TXRXPINS_VCTTST_OPEN 2 +#define MII_VCT_TXRXPINS_VCTTST_FAIL 3 +#define MII_VCT_TXRXPINS_AMPRFLN GENMASK(12, 8) +#define MII_VCT_TXRXPINS_AMPRFLN_SHIFT 8 +#define MII_VCT_TXRXPINS_DISTRFLN GENMASK(7, 0) +#define MII_VCT_TXRXPINS_DISTRFLN_MAX 0xff + +#define M88E3082_PAIR_A BIT(0) +#define M88E3082_PAIR_B BIT(1) + #define LPA_PAUSE_FIBER 0x180 #define LPA_PAUSE_ASYM_FIBER 0x100 @@ -301,6 +318,12 @@ static struct marvell_hw_stat marvell_hw_stats[] = { { "phy_receive_errors_fiber", 1, 21, 16}, }; +enum { + M88E3082_VCT_OFF, + M88E3082_VCT_PHASE1, + M88E3082_VCT_PHASE2, +}; + struct marvell_priv { u64 stats[ARRAY_SIZE(marvell_hw_stats)]; char *hwmon_name; @@ -310,6 +333,7 @@ struct marvell_priv { u32 last; u32 step; s8 pair; + u8 vct_phase; }; static int marvell_read_page(struct phy_device *phydev) @@ -2417,6 +2441,188 @@ static int marvell_vct7_cable_test_get_status(struct phy_device *phydev, return 0; } +static int m88e3082_vct_cable_test_start(struct phy_device *phydev) +{ + struct marvell_priv *priv = phydev->priv; + int ret; + + /* It needs some magic workarounds described in VCT manual for this PHY. + */ + ret = phy_write(phydev, 29, 0x0003); + if (ret < 0) + return ret; + + ret = phy_write(phydev, 30, 0x6440); + if (ret < 0) + return ret; + + if (priv->vct_phase == M88E3082_VCT_PHASE1) { + ret = phy_write(phydev, 29, 0x000a); + if (ret < 0) + return ret; + + ret = phy_write(phydev, 30, 0x0002); + if (ret < 0) + return ret; + } + + ret = phy_write(phydev, MII_BMCR, + BMCR_RESET | BMCR_SPEED100 | BMCR_FULLDPLX); + if (ret < 0) + return ret; + + ret = phy_write(phydev, MII_VCT_TXPINS, MII_VCT_TXPINS_ENVCT); + if (ret < 0) + return ret; + + ret = phy_write(phydev, 29, 0x0003); + if (ret < 0) + return ret; + + ret = phy_write(phydev, 30, 0x0); + if (ret < 0) + return ret; + + if (priv->vct_phase == M88E3082_VCT_OFF) { + priv->vct_phase = M88E3082_VCT_PHASE1; + priv->pair = 0; + + return 0; + } + + ret = phy_write(phydev, 29, 0x000a); + if (ret < 0) + return ret; + + ret = phy_write(phydev, 30, 0x0); + if (ret < 0) + return ret; + + priv->vct_phase = M88E3082_VCT_PHASE2; + + return 0; +} + +static int m88e3082_vct_cable_test_report_trans(int result, u8 distance) +{ + switch (result) { + case MII_VCT_TXRXPINS_VCTTST_OK: + if (distance == MII_VCT_TXRXPINS_DISTRFLN_MAX) + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + return ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH; + case MII_VCT_TXRXPINS_VCTTST_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case MII_VCT_TXRXPINS_VCTTST_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static u32 m88e3082_vct_distrfln_2_cm(u8 distrfln) +{ + if (distrfln < 24) + return 0; + + /* Original function for meters: y = 0.7861x - 18.862 */ + return (7861 * distrfln - 188620) / 100; +} + +static int m88e3082_vct_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + u8 tx_vcttst_res, rx_vcttst_res, tx_distrfln, rx_distrfln; + struct marvell_priv *priv = phydev->priv; + int ret, tx_result, rx_result; + bool done_phase = true; + + *finished = false; + + ret = phy_read(phydev, MII_VCT_TXPINS); + if (ret < 0) + return ret; + else if (ret & MII_VCT_TXPINS_ENVCT) + return 0; + + tx_distrfln = ret & MII_VCT_TXRXPINS_DISTRFLN; + tx_vcttst_res = (ret & MII_VCT_TXRXPINS_VCTTST) >> + MII_VCT_TXRXPINS_VCTTST_SHIFT; + + ret = phy_read(phydev, MII_VCT_RXPINS); + if (ret < 0) + return ret; + + rx_distrfln = ret & MII_VCT_TXRXPINS_DISTRFLN; + rx_vcttst_res = (ret & MII_VCT_TXRXPINS_VCTTST) >> + MII_VCT_TXRXPINS_VCTTST_SHIFT; + + *finished = true; + + switch (priv->vct_phase) { + case M88E3082_VCT_PHASE1: + tx_result = m88e3082_vct_cable_test_report_trans(tx_vcttst_res, + tx_distrfln); + rx_result = m88e3082_vct_cable_test_report_trans(rx_vcttst_res, + rx_distrfln); + + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, + tx_result); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B, + rx_result); + + if (tx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN) { + done_phase = false; + priv->pair |= M88E3082_PAIR_A; + } else if (tx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) { + u8 pair = ETHTOOL_A_CABLE_PAIR_A; + u32 cm = m88e3082_vct_distrfln_2_cm(tx_distrfln); + + ethnl_cable_test_fault_length(phydev, pair, cm); + } + + if (rx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN) { + done_phase = false; + priv->pair |= M88E3082_PAIR_B; + } else if (rx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) { + u8 pair = ETHTOOL_A_CABLE_PAIR_B; + u32 cm = m88e3082_vct_distrfln_2_cm(rx_distrfln); + + ethnl_cable_test_fault_length(phydev, pair, cm); + } + + break; + case M88E3082_VCT_PHASE2: + if (priv->pair & M88E3082_PAIR_A && + tx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN && + tx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) { + u8 pair = ETHTOOL_A_CABLE_PAIR_A; + u32 cm = m88e3082_vct_distrfln_2_cm(tx_distrfln); + + ethnl_cable_test_fault_length(phydev, pair, cm); + } + if (priv->pair & M88E3082_PAIR_B && + rx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN && + rx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) { + u8 pair = ETHTOOL_A_CABLE_PAIR_B; + u32 cm = m88e3082_vct_distrfln_2_cm(rx_distrfln); + + ethnl_cable_test_fault_length(phydev, pair, cm); + } + + break; + default: + return -EINVAL; + } + + if (!done_phase) { + *finished = false; + return m88e3082_vct_cable_test_start(phydev); + } + if (*finished) + priv->vct_phase = M88E3082_VCT_OFF; + return 0; +} + #ifdef CONFIG_HWMON struct marvell_hwmon_ops { int (*config)(struct phy_device *phydev); @@ -3300,6 +3506,8 @@ static struct phy_driver marvell_drivers[] = { .read_status = marvell_read_status, .resume = genphy_resume, .suspend = genphy_suspend, + .cable_test_start = m88e3082_vct_cable_test_start, + .cable_test_get_status = m88e3082_vct_cable_test_get_status, }, { .phy_id = MARVELL_PHY_ID_88E1112, |