diff options
4 files changed, 31 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 817794e56227..4f15463611f8 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -106,6 +106,12 @@ properties: phy-mode: $ref: "#/properties/phy-connection-type" + pcs-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PCS PHY device on a MDIO + bus to link with an external PHY (phy-handle) if exists. + phy-handle: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index b8e4894bc634..1aa4c6006cd0 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -26,7 +26,8 @@ Required properties: specified, the TX/RX DMA interrupts should be on that node instead, and only the Ethernet core interrupt is optionally specified here. -- phy-handle : Should point to the external phy device. +- phy-handle : Should point to the external phy device if exists. Pointing + this to the PCS/PMA PHY is deprecated and should be avoided. See ethernet.txt file in the same directory. - xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware @@ -68,6 +69,11 @@ Optional properties: required through the core's MDIO interface (i.e. always, unless the PHY is accessed through a different bus). + - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point + to the PCS/PMA PHY, and "phy-handle" should point to an + external PHY if exists. + Example: axi_ethernet_eth: ethernet@40c00000 { compatible = "xlnx,axi-ethernet-1.00.a"; diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 0f9c88dd1a4a..d5c1e5c4a508 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -433,8 +433,6 @@ struct axienet_local { struct net_device *ndev; struct device *dev; - struct device_node *phy_node; - struct phylink *phylink; struct phylink_config phylink_config; diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index c7eb05e4a6bf..d6fc3f7acdf0 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -2064,25 +2064,33 @@ static int axienet_probe(struct platform_device *pdev) if (ret) goto cleanup_clk; - lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); - if (lp->phy_node) { - ret = axienet_mdio_setup(lp); - if (ret) - dev_warn(&pdev->dev, - "error registering MDIO bus: %d\n", ret); - } + ret = axienet_mdio_setup(lp); + if (ret) + dev_warn(&pdev->dev, + "error registering MDIO bus: %d\n", ret); + if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII || lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) { - if (!lp->phy_node) { - dev_err(&pdev->dev, "phy-handle required for 1000BaseX/SGMII\n"); + np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0); + if (!np) { + /* Deprecated: Always use "pcs-handle" for pcs_phy. + * Falling back to "phy-handle" here is only for + * backward compatibility with old device trees. + */ + np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); + } + if (!np) { + dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for 1000BaseX/SGMII\n"); ret = -EINVAL; goto cleanup_mdio; } - lp->pcs_phy = of_mdio_find_device(lp->phy_node); + lp->pcs_phy = of_mdio_find_device(np); if (!lp->pcs_phy) { ret = -EPROBE_DEFER; + of_node_put(np); goto cleanup_mdio; } + of_node_put(np); lp->pcs.ops = &axienet_pcs_ops; lp->pcs.poll = true; } @@ -2125,8 +2133,6 @@ cleanup_mdio: put_device(&lp->pcs_phy->dev); if (lp->mii_bus) axienet_mdio_teardown(lp); - of_node_put(lp->phy_node); - cleanup_clk: clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks); clk_disable_unprepare(lp->axi_clk); @@ -2155,9 +2161,6 @@ static int axienet_remove(struct platform_device *pdev) clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks); clk_disable_unprepare(lp->axi_clk); - of_node_put(lp->phy_node); - lp->phy_node = NULL; - free_netdev(ndev); return 0; |