diff options
5 files changed, 252 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0b595b26061f..97f6eebad76a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -240,6 +240,7 @@ properties: - uniwest,imx6q-evi # Uniwest Evi - variscite,dt6customboard - wand,imx6q-wandboard # Wandboard i.MX6 Quad Board + - ysoft,imx6q-yapp4-crux # i.MX6 Quad Y Soft IOTA Crux board - zealz,imx6q-gk802 # Zealz GK802 - zii,imx6q-zii-rdu2 # ZII RDU2 Board - const: fsl,imx6q @@ -323,6 +324,20 @@ properties: - const: toradex,apalis_imx6q - const: fsl,imx6q + - description: TQ-Systems TQMa6Q SoM (variant A) on MBa6x + items: + - const: tq,imx6q-mba6x-a + - const: tq,mba6a # Expected by bootloader, to be removed in the future + - const: tq,imx6q-tqma6q-a + - const: fsl,imx6q + + - description: TQ-Systems TQMa6Q SoM (variant B) on MBa6x + items: + - const: tq,imx6q-mba6x-b + - const: tq,mba6b # Expected by bootloader, to be removed in the future + - const: tq,imx6q-tqma6q-b + - const: fsl,imx6q + - description: i.MX6QP based Boards items: - enum: @@ -334,6 +349,7 @@ properties: - kvg,vicutp # Kverneland UT1P board - prt,prtwd3 # Protonic WD3 board - wand,imx6qp-wandboard # Wandboard i.MX6 QuadPlus Board + - ysoft,imx6qp-yapp4-crux-plus # i.MX6 Quad Plus Y Soft IOTA Crux+ board - zii,imx6qp-zii-rdu2 # ZII RDU2+ Board - const: fsl,imx6qp @@ -344,6 +360,13 @@ properties: - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6 - const: fsl,imx6qp + - description: TQ-Systems TQMa6QP SoM on MBa6x + items: + - const: tq,imx6qp-mba6x-b + - const: tq,mba6b # Expected by bootloader, to be removed in the future + - const: tq,imx6qp-tqma6qp-b + - const: fsl,imx6qp + - description: i.MX6DL based Boards items: - enum: @@ -482,6 +505,20 @@ properties: - const: dh,imx6s-dhcom-som - const: fsl,imx6dl + - description: TQ-Systems TQMa6DL SoM (variant A) on MBa6x + items: + - const: tq,imx6dl-mba6x-a + - const: tq,mba6a # Expected by bootloader, to be removed in the future + - const: tq,imx6dl-tqma6dl-a + - const: fsl,imx6dl + + - description: TQ-Systems TQMa6DL SoM (variant B) on MBa6x + items: + - const: tq,imx6dl-mba6x-b + - const: tq,mba6b # Expected by bootloader, to be removed in the future + - const: tq,imx6dl-tqma6dl-b + - const: fsl,imx6dl + - description: i.MX6SL based Boards items: - enum: @@ -580,6 +617,7 @@ properties: items: - enum: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board + - joz,jozacp # JOZ Access Point - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - toradex,colibri-imx6ull # Colibri iMX6ULL Modules @@ -632,6 +670,7 @@ properties: - description: i.MX6ULZ based Boards items: - enum: + - bsh,imx6ulz-bsh-smm-m2 # i.MX6 ULZ BSH SystemMaster - fsl,imx6ulz-14x14-evk # i.MX6 ULZ 14x14 EVK Board - const: fsl,imx6ull # This seems odd. Should be last? - const: fsl,imx6ulz @@ -754,10 +793,23 @@ properties: - const: variscite,var-som-mx8mm - const: fsl,imx8mm + - description: + TQMa8MxML is a series of SOM featuring NXP i.MX8MM system-on-chip + variants. It is designed to be soldered on different carrier boards. + All variants (TQMa8M[Q,D,S][L]ML) use the same device tree, hence only + one compatible is needed. + items: + - enum: + - tq,imx8mm-tqma8mqml-mba8mx # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM on MBa8Mx + - const: tq,imx8mm-tqma8mqml # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM + - const: fsl,imx8mm + - description: i.MX8MN based Boards items: - enum: - beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit + - bsh,imx8mn-bsh-smm-s2 # i.MX8MN BSH SystemMaster S2 + - bsh,imx8mn-bsh-smm-s2pro # i.MX8MN BSH SystemMaster S2 PRO - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - gw,imx8mn-gw7902 # i.MX8MM Gateworks Board @@ -769,6 +821,17 @@ properties: - const: variscite,var-som-mx8mn - const: fsl,imx8mn + - description: + TQMa8MxNL is a series of SOM featuring NXP i.MX8MN system-on-chip + variants. It is designed to be soldered on different carrier boards. + All variants (TQMa8M[Q,D,S][L]NL) use the same device tree, hence only + one compatible is needed. + items: + - enum: + - tq,imx8mn-tqma8mqnl-mba8mx # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM on MBa8Mx + - const: tq,imx8mn-tqma8mqnl # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM + - const: fsl,imx8mn + - description: i.MX8MP based Boards items: - enum: @@ -805,6 +868,15 @@ properties: - const: purism,librem5 - const: fsl,imx8mq + - description: + TQMa8Mx is a series of SOM featuring NXP i.MX8MQ system-on-chip + variants. It is designed to be clicked on different carrier boards. + items: + - enum: + - tq,imx8mq-tqma8mq-mba8mx # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM on MBa8Mx + - const: tq,imx8mq-tqma8mq # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM + - const: fsl,imx8mq + - description: Zodiac Inflight Innovations Ultra Boards items: - enum: @@ -834,6 +906,12 @@ properties: - const: toradex,colibri-imx8x - const: fsl,imx8qxp + - description: i.MX8ULP based Boards + items: + - enum: + - fsl,imx8ulp-evk # i.MX8ULP EVK Board + - const: fsl,imx8ulp + - description: Freescale Vybrid Platform Device Tree Bindings diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml new file mode 100644 index 000000000000..d42dbb0bbc2e --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Shared Peripherals Bus Interface + +maintainers: + - Shawn Guo <[email protected]> + +description: | + A simple bus enabling access to shared peripherals. + + The "spba-bus" follows the "simple-bus" set of properties, as + specified in the Devicetree Specification. It is an extension of + "simple-bus" because the SDMA controller uses this compatible flag to + determine which peripherals are available to it and the range over which + the SDMA can access. There are no special clocks for the bus, because + the SDMA controller itself has its interrupt and clock assignments. + +select: + properties: + compatible: + contains: + const: fsl,spba-bus + required: + - compatible + +properties: + $nodename: + pattern: "^spba-bus(@[0-9a-f]+)?$" + + compatible: + items: + - const: fsl,spba-bus + - const: simple-bus + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + reg: + maxItems: 1 + + ranges: true + +required: + - compatible + - '#address-cells' + - '#size-cells' + - reg + - ranges + +additionalProperties: + type: object + +examples: + - | + spba-bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + }; diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 1b1d1c5c21ea..e7f502070d77 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -48,6 +48,11 @@ Optional properties: devices, the presence of this property indicates that the weim bus should operate in Burst Clock Mode. + - fsl,continuous-burst-clk Make Burst Clock to output continuous clock. + Without this option Burst Clock will output clock + only when necessary. This takes effect only if + "fsl,burst-clk-enable" is set. + Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml new file mode 100644 index 000000000000..fbeaac399c50 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MN DISP blk-ctrl + +maintainers: + - Lucas Stach <[email protected]> + +description: + The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mn-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: isi + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: disp_axi + - const: disp_apb + - const: disp_axi_root + - const: disp_apb_root + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + #include <dt-bindings/power/imx8mn-power.h> + + disp_blk_ctl: blk_ctrl@32e28000 { + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_dispmix>, <&pgc_mipi>, + <&pgc_mipi>; + power-domain-names = "bus", "isi", "lcdif", "mipi-dsi", + "mipi-csi"; + clocks = <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>, + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>; + clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 66d6432fd781..b491666ba620 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -187,6 +187,8 @@ patternProperties: description: Shanghai Broadmobi Communication Technology Co.,Ltd. "^brcm,.*": description: Broadcom Corporation + "^bsh,.*": + description: BSH Hausgeraete GmbH "^buffalo,.*": description: Buffalo, Inc. "^bur,.*": @@ -593,6 +595,8 @@ patternProperties: description: JetHome (IP Sokolov P.A.) "^jianda,.*": description: Jiandangjing Technology Co., Ltd. + "^joz,.*": + description: JOZ BV "^kam,.*": description: Kamstrup A/S "^karo,.*": |