diff options
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.c | 259 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.h | 10 | ||||
| -rw-r--r-- | drivers/net/phy/bcm54140.c | 3 | ||||
| -rw-r--r-- | include/linux/brcmphy.h | 52 |
4 files changed, 317 insertions, 7 deletions
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c index d5f9a2701989..cb92786e3ded 100644 --- a/drivers/net/phy/bcm-phy-lib.c +++ b/drivers/net/phy/bcm-phy-lib.c @@ -4,45 +4,103 @@ */ #include "bcm-phy-lib.h" +#include <linux/bitfield.h> #include <linux/brcmphy.h> #include <linux/export.h> #include <linux/mdio.h> #include <linux/module.h> #include <linux/phy.h> #include <linux/ethtool.h> +#include <linux/ethtool_netlink.h> #define MII_BCM_CHANNEL_WIDTH 0x2000 #define BCM_CL45VEN_EEE_ADV 0x3c -int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) +int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) { int rc; - rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + rc = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); if (rc < 0) return rc; - return phy_write(phydev, MII_BCM54XX_EXP_DATA, val); + return __phy_write(phydev, MII_BCM54XX_EXP_DATA, val); +} +EXPORT_SYMBOL_GPL(__bcm_phy_write_exp); + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) +{ + int rc; + + phy_lock_mdio_bus(phydev); + rc = __bcm_phy_write_exp(phydev, reg, val); + phy_unlock_mdio_bus(phydev); + + return rc; } EXPORT_SYMBOL_GPL(bcm_phy_write_exp); -int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) +int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg) { int val; - val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + val = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); if (val < 0) return val; - val = phy_read(phydev, MII_BCM54XX_EXP_DATA); + val = __phy_read(phydev, MII_BCM54XX_EXP_DATA); /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); + __phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); return val; } +EXPORT_SYMBOL_GPL(__bcm_phy_read_exp); + +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) +{ + int rc; + + phy_lock_mdio_bus(phydev); + rc = __bcm_phy_read_exp(phydev, reg); + phy_unlock_mdio_bus(phydev); + + return rc; +} EXPORT_SYMBOL_GPL(bcm_phy_read_exp); +int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set) +{ + int new, ret; + + ret = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (ret < 0) + return ret; + + ret = __phy_read(phydev, MII_BCM54XX_EXP_DATA); + if (ret < 0) + return ret; + + new = (ret & ~mask) | set; + if (new == ret) + return 0; + + return __phy_write(phydev, MII_BCM54XX_EXP_DATA, new); +} +EXPORT_SYMBOL_GPL(__bcm_phy_modify_exp); + +int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = __bcm_phy_modify_exp(phydev, reg, mask, set); + phy_unlock_mdio_bus(phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(bcm_phy_modify_exp); + int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum) { /* The register must be written to both the Shadow Register Select and @@ -525,6 +583,193 @@ int bcm_phy_enable_jumbo(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo); +int __bcm_phy_enable_rdb_access(struct phy_device *phydev) +{ + return __bcm_phy_write_exp(phydev, BCM54XX_EXP_REG7E, 0); +} +EXPORT_SYMBOL_GPL(__bcm_phy_enable_rdb_access); + +int __bcm_phy_enable_legacy_access(struct phy_device *phydev) +{ + return __bcm_phy_write_rdb(phydev, BCM54XX_RDB_REG0087, + BCM54XX_ACCESS_MODE_LEGACY_EN); +} +EXPORT_SYMBOL_GPL(__bcm_phy_enable_legacy_access); + +static int _bcm_phy_cable_test_start(struct phy_device *phydev, bool is_rdb) +{ + u16 mask, set; + int ret; + + /* Auto-negotiation must be enabled for cable diagnostics to work, but + * don't advertise any capabilities. + */ + phy_write(phydev, MII_BMCR, BMCR_ANENABLE); + phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA); + phy_write(phydev, MII_CTRL1000, 0); + + phy_lock_mdio_bus(phydev); + if (is_rdb) { + ret = __bcm_phy_enable_legacy_access(phydev); + if (ret) + goto out; + } + + mask = BCM54XX_ECD_CTRL_CROSS_SHORT_DIS | BCM54XX_ECD_CTRL_UNIT_MASK; + set = BCM54XX_ECD_CTRL_RUN | BCM54XX_ECD_CTRL_BREAK_LINK | + FIELD_PREP(BCM54XX_ECD_CTRL_UNIT_MASK, + BCM54XX_ECD_CTRL_UNIT_CM); + + ret = __bcm_phy_modify_exp(phydev, BCM54XX_EXP_ECD_CTRL, mask, set); + +out: + /* re-enable the RDB access even if there was an error */ + if (is_rdb) + ret = __bcm_phy_enable_rdb_access(phydev) ? : ret; + + phy_unlock_mdio_bus(phydev); + + return ret; +} + +static int bcm_phy_cable_test_report_trans(int result) +{ + switch (result) { + case BCM54XX_ECD_FAULT_TYPE_OK: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + case BCM54XX_ECD_FAULT_TYPE_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; + case BCM54XX_ECD_FAULT_TYPE_INVALID: + case BCM54XX_ECD_FAULT_TYPE_BUSY: + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static bool bcm_phy_distance_valid(int result) +{ + switch (result) { + case BCM54XX_ECD_FAULT_TYPE_OPEN: + case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT: + case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT: + return true; + } + return false; +} + +static int bcm_phy_report_length(struct phy_device *phydev, int pair) +{ + int val; + + val = __bcm_phy_read_exp(phydev, + BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS + pair); + if (val < 0) + return val; + + if (val == BCM54XX_ECD_LENGTH_RESULTS_INVALID) + return 0; + + ethnl_cable_test_fault_length(phydev, pair, val); + + return 0; +} + +static int _bcm_phy_cable_test_get_status(struct phy_device *phydev, + bool *finished, bool is_rdb) +{ + int pair_a, pair_b, pair_c, pair_d, ret; + + *finished = false; + + phy_lock_mdio_bus(phydev); + + if (is_rdb) { + ret = __bcm_phy_enable_legacy_access(phydev); + if (ret) + goto out; + } + + ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_CTRL); + if (ret < 0) + goto out; + + if (ret & BCM54XX_ECD_CTRL_IN_PROGRESS) { + ret = 0; + goto out; + } + + ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_FAULT_TYPE); + if (ret < 0) + goto out; + + pair_a = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK, ret); + pair_b = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK, ret); + pair_c = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK, ret); + pair_d = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK, ret); + + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, + bcm_phy_cable_test_report_trans(pair_a)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B, + bcm_phy_cable_test_report_trans(pair_b)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C, + bcm_phy_cable_test_report_trans(pair_c)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D, + bcm_phy_cable_test_report_trans(pair_d)); + + if (bcm_phy_distance_valid(pair_a)) + bcm_phy_report_length(phydev, 0); + if (bcm_phy_distance_valid(pair_b)) + bcm_phy_report_length(phydev, 1); + if (bcm_phy_distance_valid(pair_c)) + bcm_phy_report_length(phydev, 2); + if (bcm_phy_distance_valid(pair_d)) + bcm_phy_report_length(phydev, 3); + + ret = 0; + *finished = true; +out: + /* re-enable the RDB access even if there was an error */ + if (is_rdb) + ret = __bcm_phy_enable_rdb_access(phydev) ? : ret; + + phy_unlock_mdio_bus(phydev); + + return ret; +} + +int bcm_phy_cable_test_start(struct phy_device *phydev) +{ + return _bcm_phy_cable_test_start(phydev, false); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start); + +int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished) +{ + return _bcm_phy_cable_test_get_status(phydev, finished, false); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status); + +/* We assume that all PHYs which support RDB access can be switched to legacy + * mode. If, in the future, this is not true anymore, we have to re-implement + * this with RDB access. + */ +int bcm_phy_cable_test_start_rdb(struct phy_device *phydev) +{ + return _bcm_phy_cable_test_start(phydev, true); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start_rdb); + +int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev, + bool *finished) +{ + return _bcm_phy_cable_test_get_status(phydev, finished, true); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb); + MODULE_DESCRIPTION("Broadcom PHY Library"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Broadcom Corporation"); diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h index 4d3de91cda6c..237a8503c9b4 100644 --- a/drivers/net/phy/bcm-phy-lib.h +++ b/drivers/net/phy/bcm-phy-lib.h @@ -27,8 +27,12 @@ #define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) +int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); +int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg); +int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set); int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); +int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set); static inline int bcm_phy_write_exp_sel(struct phy_device *phydev, u16 reg, u16 val) @@ -76,4 +80,10 @@ void bcm_phy_r_rc_cal_reset(struct phy_device *phydev); int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev); int bcm_phy_enable_jumbo(struct phy_device *phydev); +int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev, + bool *finished); +int bcm_phy_cable_test_start_rdb(struct phy_device *phydev); +int bcm_phy_cable_test_start(struct phy_device *phydev); +int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished); + #endif /* _LINUX_BCM_PHY_LIB_H */ diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c index 9ef37a3bc2bb..8998e68bb26b 100644 --- a/drivers/net/phy/bcm54140.c +++ b/drivers/net/phy/bcm54140.c @@ -831,6 +831,7 @@ static struct phy_driver bcm54140_drivers[] = { .phy_id = PHY_ID_BCM54140, .phy_id_mask = BCM54140_PHY_ID_MASK, .name = "Broadcom BCM54140", + .flags = PHY_POLL_CABLE_TEST, .features = PHY_GBIT_FEATURES, .config_init = bcm54140_config_init, .did_interrupt = bcm54140_did_interrupt, @@ -842,6 +843,8 @@ static struct phy_driver bcm54140_drivers[] = { .soft_reset = genphy_soft_reset, .get_tunable = bcm54140_get_tunable, .set_tunable = bcm54140_set_tunable, + .cable_test_start = bcm_phy_cable_test_start_rdb, + .cable_test_get_status = bcm_phy_cable_test_get_status_rdb, }, }; module_phy_driver(bcm54140_drivers); diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 58d0150acc3e..d41624db6de2 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -119,6 +119,11 @@ #define MII_BCM54XX_RDB_ADDR 0x1e #define MII_BCM54XX_RDB_DATA 0x1f +/* legacy access control via rdb/expansion register */ +#define BCM54XX_RDB_REG0087 0x0087 +#define BCM54XX_EXP_REG7E (MII_BCM54XX_EXP_SEL_ER + 0x7E) +#define BCM54XX_ACCESS_MODE_LEGACY_EN BIT(15) + /* * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) */ @@ -294,4 +299,51 @@ #define MII_BRCM_CORE_EXPB0 0xB0 #define MII_BRCM_CORE_EXPB1 0xB1 +/* Enhanced Cable Diagnostics */ +#define BCM54XX_RDB_ECD_CTRL 0x2a0 +#define BCM54XX_EXP_ECD_CTRL (MII_BCM54XX_EXP_SEL_ER + 0xc0) + +#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT3 1 /* CAT3 or worse */ +#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT5 0 /* CAT5 or better */ +#define BCM54XX_ECD_CTRL_CABLE_TYPE_MASK BIT(0) /* cable type */ +#define BCM54XX_ECD_CTRL_INVALID BIT(3) /* invalid result */ +#define BCM54XX_ECD_CTRL_UNIT_CM 0 /* centimeters */ +#define BCM54XX_ECD_CTRL_UNIT_M 1 /* meters */ +#define BCM54XX_ECD_CTRL_UNIT_MASK BIT(10) /* cable length unit */ +#define BCM54XX_ECD_CTRL_IN_PROGRESS BIT(11) /* test in progress */ +#define BCM54XX_ECD_CTRL_BREAK_LINK BIT(12) /* unconnect link + * during test + */ +#define BCM54XX_ECD_CTRL_CROSS_SHORT_DIS BIT(13) /* disable inter-pair + * short check + */ +#define BCM54XX_ECD_CTRL_RUN BIT(15) /* run immediate */ + +#define BCM54XX_RDB_ECD_FAULT_TYPE 0x2a1 +#define BCM54XX_EXP_ECD_FAULT_TYPE (MII_BCM54XX_EXP_SEL_ER + 0xc1) +#define BCM54XX_ECD_FAULT_TYPE_INVALID 0x0 +#define BCM54XX_ECD_FAULT_TYPE_OK 0x1 +#define BCM54XX_ECD_FAULT_TYPE_OPEN 0x2 +#define BCM54XX_ECD_FAULT_TYPE_SAME_SHORT 0x3 /* short same pair */ +#define BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT 0x4 /* short different pairs */ +#define BCM54XX_ECD_FAULT_TYPE_BUSY 0x9 +#define BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK GENMASK(3, 0) +#define BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK GENMASK(7, 4) +#define BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK GENMASK(11, 8) +#define BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK GENMASK(15, 12) +#define BCM54XX_ECD_PAIR_A_LENGTH_RESULTS 0x2a2 +#define BCM54XX_ECD_PAIR_B_LENGTH_RESULTS 0x2a3 +#define BCM54XX_ECD_PAIR_C_LENGTH_RESULTS 0x2a4 +#define BCM54XX_ECD_PAIR_D_LENGTH_RESULTS 0x2a5 + +#define BCM54XX_RDB_ECD_PAIR_A_LENGTH_RESULTS 0x2a2 +#define BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc2) +#define BCM54XX_RDB_ECD_PAIR_B_LENGTH_RESULTS 0x2a3 +#define BCM54XX_EXP_ECD_PAIR_B_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc3) +#define BCM54XX_RDB_ECD_PAIR_C_LENGTH_RESULTS 0x2a4 +#define BCM54XX_EXP_ECD_PAIR_C_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc4) +#define BCM54XX_RDB_ECD_PAIR_D_LENGTH_RESULTS 0x2a5 +#define BCM54XX_EXP_ECD_PAIR_D_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc5) +#define BCM54XX_ECD_LENGTH_RESULTS_INVALID 0xffff + #endif /* _LINUX_BRCMPHY_H */ |