diff options
225 files changed, 8974 insertions, 1848 deletions
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst index b4bea32472b6..d4f34ae9e6f4 100644 --- a/Documentation/arm/index.rst +++ b/Documentation/arm/index.rst @@ -52,6 +52,7 @@ SoC-specific documents stm32/stm32f746-overview stm32/overview stm32/stm32h743-overview + stm32/stm32h750-overview stm32/stm32f769-overview stm32/stm32f429-overview stm32/stm32mp157-overview diff --git a/Documentation/arm/stm32/stm32h750-overview.rst b/Documentation/arm/stm32/stm32h750-overview.rst new file mode 100644 index 000000000000..0e51235c9547 --- /dev/null +++ b/Documentation/arm/stm32/stm32h750-overview.rst @@ -0,0 +1,34 @@ +================== +STM32H750 Overview +================== + +Introduction +------------ + +The STM32H750 is a Cortex-M7 MCU aimed at various applications. +It features: + +- Cortex-M7 core running up to @480MHz +- 128K internal flash, 1MBytes internal RAM +- FMC controller to connect SDRAM, NOR and NAND memories +- Dual mode QSPI +- SD/MMC/SDIO support +- Ethernet controller +- USB OTFG FS & HS controllers +- I2C, SPI, CAN busses support +- Several 16 & 32 bits general purpose timers +- Serial Audio interface +- LCD controller +- HDMI-CEC +- SPDIFRX +- DFSDM + +Resources +--------- + +Datasheet and reference manual are publicly available on ST website (STM32H750_). + +.. _STM32H750: https://www.st.com/en/microcontrollers-microprocessors/stm32h750-value-line.html + +:Authors: Dillon Min <[email protected]> + diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml index e55731f43c84..2cd4e4a32278 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -21,6 +21,7 @@ properties: items: - enum: - netgear,r8000p + - tplink,archer-c2300-v1 - const: brcm,bcm4906 - const: brcm,bcm4908 diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 297c87f45db8..e3c50f231d71 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -617,6 +617,7 @@ properties: - kam,imx7d-flex-concentrator # Kamstrup OMNIA Flex Concentrator - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board + - remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph @@ -688,6 +689,14 @@ properties: - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm + - description: Engicam i.Core MX8M Mini SoM based boards + items: + - enum: + - engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 + - engicam,icore-mx8mm-edimm2.2 # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit + - const: engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SoM + - const: fsl,imx8mm + - description: Kontron BL i.MX8MM (N801X S) Board items: - const: kontron,imx8mm-n801x-s @@ -733,6 +742,7 @@ properties: - einfochips,imx8mq-thor96 # i.MX8MQ Thor96 Board - fsl,imx8mq-evk # i.MX8MQ EVK Board - google,imx8mq-phanbell # Google Coral Edge TPU + - kontron,pitx-imx8m # Kontron pITX-imx8m Board - purism,librem5-devkit # Purism Librem5 devkit - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse - technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk @@ -755,6 +765,12 @@ properties: - const: zii,imx8mq-ultra - const: fsl,imx8mq + - description: i.MX8QM based Boards + items: + - enum: + - fsl,imx8qm-mek # i.MX8QM MEK Board + - const: fsl,imx8qm + - description: i.MX8QXP based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 93b3bdf6eaeb..aff57a8c8c30 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -118,6 +118,10 @@ properties: - enum: - mediatek,mt8183-evb - const: mediatek,mt8183 + - items: + - enum: + - mediatek,mt8195-evb + - const: mediatek,mt8195 - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) items: - enum: @@ -125,6 +129,38 @@ properties: - google,krane-sku176 - const: google,krane - const: mediatek,mt8183 + - description: Google Damu (ASUS Chromebook Flip CM3) + items: + - const: google,damu + - const: mediatek,mt8183 + - description: Google Juniper (Acer Chromebook Spin 311) + items: + - const: google,juniper-sku16 + - const: google,juniper + - const: mediatek,mt8183 + - description: Google Kakadu (ASUS Chromebook Detachable CM3) + items: + - const: google,kakadu-rev3 + - const: google,kakadu-rev2 + - const: google,kakadu + - const: mediatek,mt8183 + - description: Google Kodama (Lenovo 10e Chromebook Tablet) + items: + - enum: + - google,kodama-sku16 + - google,kodama-sku272 + - google,kodama-sku288 + - google,kodama-sku32 + - const: google,kodama + - const: mediatek,mt8183 + - items: + - enum: + - mediatek,mt8183-pumpkin + - const: mediatek,mt8183 + - items: + - enum: + - mediatek,mt8516-pumpkin + - const: mediatek,mt8516 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index e7525a3395e5..9a77ab74be99 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -53,6 +53,10 @@ properties: - const: st,stm32h743 - items: - enum: + - st,stm32h750i-art-pi + - const: st,stm32h750 + - items: + - enum: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 @@ -64,6 +68,23 @@ properties: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + + - description: Engicam i.Core STM32MP1 SoM based Boards + items: + - enum: + - engicam,icore-stm32mp1-ctouch2 # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 + - engicam,icore-stm32mp1-edimm2.2 # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit + - const: engicam,icore-stm32mp1 # STM32MP1 Engicam i.Core STM32MP1 SoM + - const: st,stm32mp157 + + - description: Engicam MicroGEA STM32MP1 SoM based Boards + items: + - enum: + - engicam,microgea-stm32mp1-microdev2.0 + - engicam,microgea-stm32mp1-microdev2.0-of7 + - const: engicam,microgea-stm32mp1 + - const: st,stm32mp157 + - description: Octavo OSD32MP15x System-in-Package based boards items: - enum: diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index 940486ef1051..0f6fe365ebf3 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -107,8 +107,8 @@ examples: interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>; - clock-names = "ipg", "per", "ahb"; + <&sdhc0_lpcg IMX_LPCG_CLK_5>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_0>; }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 15cef82cd356..1a3dff277e2b 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -34,12 +34,15 @@ properties: - fsl,imx8mm-mu - fsl,imx8mn-mu - fsl,imx8mp-mu + - fsl,imx8qm-mu - fsl,imx8qxp-mu - const: fsl,imx6sx-mu - description: To communicate with i.MX8 SCU with fast IPC items: - const: fsl,imx8-mu-scu - - const: fsl,imx8qxp-mu + - enum: + - fsl,imx8qm-mu + - fsl,imx8qxp-mu - const: fsl,imx6sx-mu reg: diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index ef93c3b95424..b6791702bcfc 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -7,6 +7,7 @@ Required properties: "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622 "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623 "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 + "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516 - reg: Should contain registers location and length diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 38c5fa21f435..b62397d2bb0c 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -54,6 +54,7 @@ For Tegra210: - avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. - dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. - hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. +- nvidia,pmc: phandle and specifier referring to the Tegra210 PMC node. For Tegra186: - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 647b5aee86f3..64c4fb59acd1 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -20,6 +20,7 @@ Required properties: * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS + * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS * "mediatek,mt8516-uart" for MT8516 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 8631678283f9..865be05083c3 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -80,7 +80,8 @@ required: - interrupts - clocks -additionalProperties: false +additionalProperties: + type: object examples: - | diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 690a9c0966ac..e5c57d6e0186 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -23,6 +23,7 @@ Required properties: For those SoCs that use SYST * "mediatek,mt8183-timer" for MT8183 compatible timers (SYST) * "mediatek,mt8192-timer" for MT8192 compatible timers (SYST) + * "mediatek,mt8195-timer" for MT8195 compatible timers (SYST) * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f6064d84a424..a8e1e8d2ef20 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -932,6 +932,8 @@ patternProperties: description: Unisoc Communications, Inc. "^realtek,.*": description: Realtek Semiconductor Corp. + "^remarkable,.*": + description: reMarkable AS "^renesas,.*": description: Renesas Electronics Corporation "^rex,.*": diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e5d4ab4e75e..3138b27a4710 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -660,6 +660,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-pico-hobbit.dtb \ imx7d-pico-nymph.dtb \ imx7d-pico-pi.dtb \ + imx7d-remarkable2.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ @@ -1071,11 +1072,16 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32h750i-art-pi.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ stm32mp157a-iot-box.dtb \ + stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ + stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ + stm32mp157a-icore-stm32mp1-ctouch2.dtb \ + stm32mp157a-icore-stm32mp1-edimm2.2.dtb \ stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dhcom-picoitx.dtb \ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5b213a1e68bb..5e33d0e88f5b 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -40,6 +40,9 @@ ethernet1 = &cpsw_emac1; spi0 = &spi0; spi1 = &spi1; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; }; cpus { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 6a96655d8626..8ed403767540 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3b0029e61b4c..667b118ba4ee 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 90f57bad6b24..ff31ce45831a 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; spi { diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 41548d6d479a..5bac1e15775a 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -21,6 +21,11 @@ reg = <0x00000000 0x08000000>; }; + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index fed75e6ab58c..61c7b137607e 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -22,8 +22,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 79542e18915c..4c60eda296d9 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 51c64f0b2560..9ca6d1b2590d 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index c29950b43a95..0e273c598732 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 2f2d2b0a6893..d857751ec507 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; spi { diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 0e349e39f608..8b1a05a0f1a1 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; spi { diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 432254383769..9316a36434f7 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -21,6 +21,11 @@ reg = <0x00000000 0x08000000>; }; + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 8f1e565c3db4..6c6bb7b17d27 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -21,8 +21,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index ce888b1835d1..d29e7f80ea6a 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -21,8 +21,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index ed8619b54d69..9b6887d477d8 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -18,8 +18,13 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 1f87993eae1d..7989a53597d4 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -21,8 +21,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 6c6199a53d09..87b655be674c 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -32,8 +32,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 911c65fbf251..e635a15041dd 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; nand: nand@18028000 { diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 3725f2b0d60b..05d4f2931772 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x100000>; }; gpio-keys { @@ -70,6 +75,7 @@ power { label = "bcm53xx:white:power"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; }; wifi-disabled { @@ -274,7 +280,7 @@ &nandcs { partitions { - compatible = "fixed-partitions"; + compatible = "linksys,ns-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -295,20 +301,18 @@ }; partition@200000 { - label = "firmware"; - reg = <0x0200000 0x01D00000>; - compatible = "brcm,trx"; + reg = <0x0200000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; }; - partition@1F00000 { - label = "failsafe"; - reg = <0x01F00000 0x01D00000>; - read-only; + partition@1f00000 { + reg = <0x01f00000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; }; partition@5200000 { label = "system"; - reg = <0x05200000 0x02E00000>; + reg = <0x05200000 0x02e00000>; }; }; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 50f7cd08cfbb..4b8117f32d26 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index bcc420f85b56..5fecce0422c7 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 4f8d777ae18d..452b8d0ab180 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -18,8 +18,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index e17e9a17fb00..cbe8c8e4a301 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 60cc87ecc7ec..24ae3c8a3e09 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index f42a1703f4ab..42097a4c2659 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -18,8 +18,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts index ac3a4483dcb3..a2566ad4619c 100644 --- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts +++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts @@ -15,8 +15,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 3bf90d9e3335..1c50ae7b0e17 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1,5 +1,8 @@ &l4_cfg { /* 0x4a000000 */ - compatible = "ti,dra7-l4-cfg", "simple-bus"; + compatible = "ti,dra7-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_coreaon>; + clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -11,7 +14,7 @@ <0x00200000 0x4a200000 0x100000>; /* segment 2 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -493,7 +496,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */ @@ -572,11 +575,34 @@ }; target-module@40000 { /* 0x4a140000, ap 31 06.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "sata"; + reg = <0x400fc 4>, + <0x41100 4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_l3init>; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>; + clock-names = "fck"; #size-cells = <1>; + #address-cells = <1>; ranges = <0x0 0x40000 0x10000>; + + sata: sata@0 { + compatible = "snps,dwc-ahci"; + reg = <0 0x1100>, <0x1100 0x8>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; + ports-implemented = <0x1>; + }; }; target-module@51000 { /* 0x4a151000, ap 33 50.0 */ @@ -789,7 +815,7 @@ }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */ @@ -1006,7 +1032,10 @@ }; &l4_per1 { /* 0x48000000 */ - compatible = "ti,dra7-l4-per1", "simple-bus"; + compatible = "ti,dra7-l4-per1", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -1020,7 +1049,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2269,14 +2298,17 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_per2 { /* 0x48400000 */ - compatible = "ti,dra7-l4-per2", "simple-bus"; + compatible = "ti,dra7-l4-per2", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48400000 0x800>, <0x48400800 0x800>, <0x48401000 0x400>, @@ -2296,7 +2328,7 @@ <0x48454000 0x48454000 0x400000>; /* L3 data port */ segment@0 { /* 0x48400000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -3094,7 +3126,10 @@ }; &l4_per3 { /* 0x48800000 */ - compatible = "ti,dra7-l4-per3", "simple-bus"; + compatible = "ti,dra7-l4-per3", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48800000 0x800>, <0x48800800 0x800>, <0x48801000 0x400>, @@ -3106,7 +3141,7 @@ ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */ segment@0 { /* 0x48800000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -4205,7 +4240,10 @@ }; &l4_wkup { /* 0x4ae00000 */ - compatible = "ti,dra7-l4-wkup", "simple-bus"; + compatible = "ti,dra7-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkupaon>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4ae00000 0x800>, <0x4ae00800 0x800>, <0x4ae01000 0x1000>; @@ -4218,7 +4256,7 @@ <0x00030000 0x4ae30000 0x010000>; /* segment 3 */ segment@0 { /* 0x4ae00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -4295,7 +4333,7 @@ }; segment@10000 { /* 0x4ae10000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -4405,7 +4443,7 @@ }; segment@20000 { /* 0x4ae20000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ @@ -4511,7 +4549,7 @@ }; segment@30000 { /* 0x4ae30000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */ diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ce1194744f84..c988f1d039cf 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -125,18 +125,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap5-mpu"; - ti,hwmods = "mpu"; - }; - }; - - /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -144,16 +132,22 @@ * hierarchy. */ ocp: ocp { - compatible = "ti,dra7-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>, + <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; - ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x0 0x44000000 0x0 0x1000000>, - <0x0 0x45000000 0x0 0x1000>; - interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,dra7-l3-noc"; + reg = <0x44000000 0x1000>, + <0x45000000 0x1000>; + interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_cfg: interconnect@4a000000 { }; @@ -161,31 +155,61 @@ }; l4_per1: interconnect@48000000 { }; + + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap5-mpu"; + }; + }; + l4_per2: interconnect@48400000 { }; l4_per3: interconnect@48800000 { }; - axi@0 { - compatible = "simple-bus"; + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi0: target-module@51000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 0>; + reset-names = "rstctrl"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51000000 0x51000000 0x3000 - 0x0 0x20000000 0x10000000>; + ranges = <0x51000000 0x51000000 0x3000>, + <0x20000000 0x20000000 0x10000000>; dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. */ pcie1_rc: pcie@51000000 { - reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg = <0x51000000 0x2000>, + <0x51002000 0x14c>, + <0x20001000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x03000 0 0x00010000 - 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>, + <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -209,7 +233,10 @@ }; pcie1_ep: pcie_ep@51000000 { - reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; + reg = <0x51000000 0x28>, + <0x51002000 0x14c>, + <0x51001000 0x28>, + <0x20001000 0x10000000>; reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; interrupts = <0 232 0x4>; num-lanes = <1>; @@ -224,23 +251,38 @@ }; }; - axi@1 { - compatible = "simple-bus"; + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi1: target-module@51800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 1>; + reset-names = "rstctrl"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51800000 0x51800000 0x3000 - 0x0 0x30000000 0x10000000>; + ranges = <0x51800000 0x51800000 0x3000>, + <0x30000000 0x30000000 0x10000000>; dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { - reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; + reg = <0x51800000 0x2000>, + <0x51802000 0x14c>, + <0x30001000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x03000 0 0x00010000 - 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>, + <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -336,8 +378,15 @@ target-module@43300000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43300000 0x4>; - reg-names = "rev"; + reg = <0x43300000 0x4>, + <0x43300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -369,8 +418,15 @@ target-module@43400000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43400000 0x4>; - reg-names = "rev"; + reg = <0x43400000 0x4>, + <0x43400010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -387,8 +443,15 @@ target-module@43500000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43500000 0x4>; - reg-names = "rev"; + reg = <0x43500000 0x4>, + <0x43500010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -403,11 +466,24 @@ }; }; - dmm@4e000000 { - compatible = "ti,omap5-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "dmm"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap5-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + }; }; ipu1: ipu@58820000 { @@ -694,32 +770,37 @@ >; }; - qspi: spi@4b300000 { - compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>, - <0x5c000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; - syscon-chipselects = <&scm_conf 0x558>; - #address-cells = <1>; - #size-cells = <0>; + target-module@4b300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "qspi"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + reg = <0x4b300000 0x4>, + <0x4b300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>; clock-names = "fck"; - num-cs = <4>; - interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - /* OCP2SCP3 */ - sata: sata@4a141100 { - compatible = "snps,dwc-ahci"; - reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - phys = <&sata_phy>; - phy-names = "sata-phy"; - clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; - ti,hwmods = "sata"; - ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b300000 0x1000>, + <0x5c000000 0x5c000000 0x4000000>; + + qspi: spi@0 { + compatible = "ti,dra7xxx-qspi"; + reg = <0 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; /* OCP2SCP1 */ diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts index 97cfd970fe74..82ce8c43be86 100644 --- a/arch/arm/boot/dts/imx50-kobo-aura.dts +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -143,10 +143,24 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - /* TODO: embedded controller at 0x43 */ + embedded-controller@43 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec>; + compatible = "netronix,ntxec"; + reg = <0x43>; + system-power-controller; + interrupts-extended = <&gpio4 11 IRQ_TYPE_EDGE_FALLING>; + #pwm-cells = <2>; + }; }; &iomuxc { + pinctrl_ec: ecgrp { + fsl,pins = < + MX50_PAD_CSPI_SS0__GPIO4_11 0x0 /* INT */ + >; + }; + pinctrl_gpiokeys: gpiokeysgrp { fsl,pins = < MX50_PAD_CSPI_MISO__GPIO4_10 0x0 diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 7ebb46ce9e36..01cfcbe5928e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -467,7 +467,7 @@ }; iim: efuse@83f98000 { - compatible = "fsl,imx51-iim", "fsl,imx27-iim"; + compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon"; reg = <0x83f98000 0x4000>; interrupts = <69>; clocks = <&clks IMX5_CLK_IIM_GATE>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 9b4efcd82636..fe4244044a0f 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -142,6 +142,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -209,6 +210,7 @@ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_EIM_DA13__GPIO3_13 0xe4 >; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 000050aeeabe..2cf3909cca2f 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -668,7 +668,7 @@ }; iim: efuse@63f98000 { - compatible = "fsl,imx53-iim", "fsl,imx27-iim"; + compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon"; reg = <0x63f98000 0x4000>; interrupts = <69>; clocks = <&clks IMX5_CLK_IIM_GATE>; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index 333c306aa946..bf72a67a9c76 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -19,17 +19,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@20 { + button-start { label = "START"; linux,code = <31>; gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; }; - button@21 { + button-clean { label = "CLEAN"; linux,code = <46>; gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 604f2420370f..d994b32ad825 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -84,6 +84,11 @@ }; &pca9539 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "", "SM_D_ACT", "DP1_RST#", "", + "WD15S_EN", "WD15S_DIS#", "", "", + "", "", "", ""; + P04-hog { gpio-hog; gpios = <4 0>; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 56d2aeb1900c..fa1a1df37cde 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -84,6 +84,11 @@ }; &pca9539 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "", "SM_D_ACT", "DP1_RST#", "", + "WD15S_EN", "WD15S_DIS#", "", "", + "", "", "", ""; + P07-hog { gpio-hog; gpios = <7 0>; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 3d6b757bf325..db8c332df6a1 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -199,6 +199,11 @@ }; &pca9539 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#", + "", "", "", "", + "", "", "", ""; + P10-hog { gpio-hog; gpios = <8 0>; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index e4578ed3371e..6330d75f8f39 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -124,6 +124,9 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -172,7 +175,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-supply = <®_3p3v>; + phy-handle = <&phy0>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &hdmi { @@ -575,6 +590,12 @@ >; }; + pinctrl_usbotg_vbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 2a98cc657595..10922375c51e 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -173,8 +173,8 @@ &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; - scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; pca9547: mux@70 { compatible = "nxp,pca9547"; @@ -315,15 +315,15 @@ &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; - scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &i2c3 { pinctrl-names = "default", "gpio"; pinctrl-1 = <&pinctrl_i2c3_gpio>; - sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 959d8ac2e393..8e587e17e75d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -32,8 +32,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 8072ed47c6bb..a0710d562766 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -32,8 +32,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 8c9bcdd39830..29ba24c273e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -33,8 +33,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index e5d803d023c8..435dec6338fe 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -67,8 +67,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 290a607fede9..2e61102ae694 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index 093a219a77ae..4bc4371e6bae 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -91,8 +91,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index e1c8dd233cab..1fdb7ba630f1 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -75,8 +75,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 3cd2e717c1da..304f3fb88fab 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -72,8 +72,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi index 21c68a55bcb9..fcd3bdfd6182 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi @@ -23,8 +23,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index ed4e22259959..68e5ab2e27e2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -26,8 +26,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi index 797f160249f7..0415bcb41640 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index 4cd7d290f5b2..8e23cec7149e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -23,8 +23,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index d434868e870a..51d28e275aa6 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -78,7 +78,8 @@ ssi2 { fsl,audmux-port = <1>; fsl,port-config = < - (IMX_AUDMUX_V2_PTCR_TFSDIR | + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | IMX_AUDMUX_V2_PTCR_TFSEL(4) | IMX_AUDMUX_V2_PTCR_TCLKDIR | IMX_AUDMUX_V2_PTCR_TCSEL(4)) @@ -89,7 +90,7 @@ pins5 { fsl,audmux-port = <4>; fsl,port-config = < - 0x00000000 + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(1) >; }; @@ -164,6 +165,7 @@ &usbotg { status = "okay"; + dr_mode = "peripheral"; }; &usdhc2 { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 7a1e53195785..aed9784d3995 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -31,6 +31,8 @@ reg_usb_h1_vbus: regulator@1 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; reg = <1>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; @@ -41,6 +43,8 @@ }; gpio_leds: leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; compatible = "gpio-leds"; green { @@ -122,6 +126,8 @@ }; pmic@58 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; compatible = "dlg,da9063"; reg = <0x58>; interrupt-parent = <&gpio2>; @@ -215,25 +221,13 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - imx6q-phytec-pfla02 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ - MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ - >; - }; - pinctrl_ecspi3: ecspi3grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* CS0 */ >; }; @@ -255,6 +249,7 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 /* Reset GPIO */ >; }; @@ -308,10 +303,21 @@ >; }; + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; }; + pinctrl_pmic: pmicgrp { + fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000>; /* PMIC interrupt */ + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -328,9 +334,9 @@ >; }; - pinctrl_usbh1: usbh1grp { + pinctrl_usbh1_vbus: usbh1vbusgrp { fsl,pins = < - MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 >; }; @@ -415,8 +421,6 @@ &usbh1 { vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index e6aa0c33754d..fded07f370b3 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -506,7 +506,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index c070893c509e..b62a0dbb033f 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -97,15 +97,21 @@ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; codec: sgtl5000@a { @@ -185,6 +191,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b0 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b0 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -192,6 +205,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b0 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b0 + >; + }; + pinctrl_mclk: mclkgrp { fsl,pins = < MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index 6ea5f918d059..a17b8bbbdb95 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -97,8 +97,11 @@ pinctrl-1 = <&pinctrl_i2c1_sleep>; status = "okay"; - /* TODO: embedded controller at 0x43 (driver missing) */ - + ec: embedded-controller@43 { + compatible = "netronix,ntxec"; + reg = <0x43>; + #pwm-cells = <2>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 4436556624d6..0cdbf7b6e728 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -522,12 +522,12 @@ pinctrl_usdhc2: usdhc2-grp { fsl,pins = < - MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 - MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069 MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 >; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 5ef86de53013..23856a8d4b8c 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -99,8 +99,6 @@ /* probe deferral not supported */ /* pcie-bus-supply = <®_mpcie_1v5>; */ reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; - disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; - power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts new file mode 100644 index 000000000000..8cbae656395c --- /dev/null +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ + * + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "reMarkable 2.0"; + compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d"; + + chosen { + stdout-path = &uart6; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&clks { + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, + <&clks IMX7D_CLKO2_ROOT_DIV>; + assigned-clock-parents = <&clks IMX7D_CKIL>; + assigned-clock-rates = <0>, <32768>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&usbotg2 { + srp-disable; + hnp-disable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74 + >; + }; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 007dd2bd0595..4fce81422943 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -246,6 +246,7 @@ reg = <0x0 0x1700000 0x0 0x100000>; ranges = <0x0 0x0 0x1700000 0x100000>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", @@ -871,7 +872,7 @@ phy_type = "ulpi"; }; - usb3: usb3@3100000 { + usb3: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index b0a21b0b731f..075d583d6f40 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mstar-msc313-mpll.h> / { #address-cells = <1>; @@ -46,6 +47,21 @@ interrupt-affinity = <&cpu0>; }; + clocks: clocks { + xtal: xtal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + rtc_xtal: rtc_xtal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + status = "disabled"; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -109,6 +125,13 @@ reg = <0x204400 0x200>; }; + mpll: mpll@206000 { + compatible = "mstar,msc313-mpll"; + #clock-cells = <1>; + reg = <0x206000 0x200>; + clocks = <&xtal>; + }; + gpio: gpio@207800 { #gpio-cells = <2>; reg = <0x207800 0x200>; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index fade14284017..4776f85d6d5b 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -607,7 +607,7 @@ }; usb0: usb@1a1c0000 { - compatible = "mediatek,mt8173-xhci"; + compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci"; reg = <0 0x1a1c0000 0 0x1000>, <0 0x1a1c4700 0 0x0100>; reg-names = "mac", "ippc"; @@ -620,8 +620,9 @@ status = "disabled"; }; - u3phy0: usb-phy@1a1c4000 { - compatible = "mediatek,mt2701-u3phy"; + u3phy0: t-phy@1a1c4000 { + compatible = "mediatek,mt2701-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a1c4000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -646,7 +647,7 @@ }; usb1: usb@1a240000 { - compatible = "mediatek,mt8173-xhci"; + compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci"; reg = <0 0x1a240000 0 0x1000>, <0 0x1a244700 0 0x0100>; reg-names = "mac", "ippc"; @@ -659,8 +660,9 @@ status = "disabled"; }; - u3phy1: usb-phy@1a244000 { - compatible = "mediatek,mt2701-u3phy"; + u3phy1: t-phy@1a244000 { + compatible = "mediatek,mt2701-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a244000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -700,8 +702,9 @@ status = "disabled"; }; - u2phy0: usb-phy@11210000 { - compatible = "mediatek,generic-tphy-v1"; + u2phy0: t-phy@11210000 { + compatible = "mediatek,mt2701-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x11210000 0 0x0800>; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index f3ccb70c0779..70df00a7bb26 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -17,6 +17,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt6589-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index aea6809500d7..3c11f7cfcc40 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -787,8 +787,9 @@ }; }; - pcie0_phy: pcie-phy@1a149000 { - compatible = "mediatek,generic-tphy-v1"; + pcie0_phy: t-phy@1a149000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a149000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -804,8 +805,9 @@ }; }; - pcie1_phy: pcie-phy@1a14a000 { - compatible = "mediatek,generic-tphy-v1"; + pcie1_phy: t-phy@1a14a000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a14a000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -823,7 +825,7 @@ usb1: usb@1a1c0000 { compatible = "mediatek,mt7623-xhci", - "mediatek,mt8173-xhci"; + "mediatek,mtk-xhci"; reg = <0 0x1a1c0000 0 0x1000>, <0 0x1a1c4700 0 0x0100>; reg-names = "mac", "ippc"; @@ -836,9 +838,9 @@ status = "disabled"; }; - u3phy1: usb-phy@1a1c4000 { - compatible = "mediatek,mt7623-u3phy", - "mediatek,mt2701-u3phy"; + u3phy1: t-phy@1a1c4000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a1c4000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -864,7 +866,7 @@ usb2: usb@1a240000 { compatible = "mediatek,mt7623-xhci", - "mediatek,mt8173-xhci"; + "mediatek,mtk-xhci"; reg = <0 0x1a240000 0 0x1000>, <0 0x1a244700 0 0x0100>; reg-names = "mac", "ippc"; @@ -877,9 +879,9 @@ status = "disabled"; }; - u3phy2: usb-phy@1a244000 { - compatible = "mediatek,mt7623-u3phy", - "mediatek,mt2701-u3phy"; + u3phy2: t-phy@1a244000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a244000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi index 1880ac9e32cf..bcb0846e29fd 100644 --- a/arch/arm/boot/dts/mt7623n.dtsi +++ b/arch/arm/boot/dts/mt7623n.dtsi @@ -246,7 +246,7 @@ status = "disabled"; }; - mipi_tx0: mipi-dphy@10010000 { + mipi_tx0: dsi-phy@10010000 { compatible = "mediatek,mt7623-mipi-tx", "mediatek,mt2701-mipi-tx"; reg = <0 0x10010000 0 0x90>; @@ -265,7 +265,7 @@ status = "disabled"; }; - hdmi_phy: phy@10209100 { + hdmi_phy: hdmi-phy@10209100 { compatible = "mediatek,mt7623-hdmi-phy", "mediatek,mt2701-hdmi-phy"; reg = <0 0x10209100 0 0x24>; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 5cbb3d244c75..874043f0490d 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -329,8 +329,9 @@ status = "disabled"; }; - u3phy0: usb-phy@1a0c4000 { - compatible = "mediatek,generic-tphy-v2"; + u3phy0: t-phy@1a0c4000 { + compatible = "mediatek,mt7629-tphy", + "mediatek,generic-tphy-v2"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1a0c4000 0xe00>; @@ -413,14 +414,15 @@ }; }; - pciephy1: pcie-phy@1a14a000 { - compatible = "mediatek,generic-tphy-v2"; + pciephy1: t-phy@1a14a000 { + compatible = "mediatek,mt7629-tphy", + "mediatek,generic-tphy-v2"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1a14a000 0x1000>; status = "disabled"; - pcieport1: port1phy@0 { + pcieport1: pcie-phy@0 { reg = <0 0x1000>; clocks = <&clk20m>; clock-names = "ref"; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index e0bb60a30779..c83849dfde24 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 &l4_cfg { /* 0x4a000000 */ - compatible = "ti,omap4-l4-cfg", "simple-bus"; + compatible = "ti,omap4-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -16,7 +19,7 @@ <0x00300000 0x4a300000 0x080000>; /* segment 6 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -347,7 +350,7 @@ }; segment@80000 { /* 0x4a080000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ @@ -639,7 +642,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ @@ -741,13 +744,13 @@ }; segment@180000 { /* 0x4a180000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ @@ -903,13 +906,13 @@ }; segment@280000 { /* 0x4a280000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ @@ -944,7 +947,10 @@ }; &l4_wkup { /* 0x4a300000 */ - compatible = "ti,omap4-l4-wkup", "simple-bus"; + compatible = "ti,omap4-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkup>; + clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a300000 0x800>, <0x4a300800 0x800>, <0x4a301000 0x1000>; @@ -956,7 +962,7 @@ <0x00020000 0x4a320000 0x010000>; /* segment 2 */ segment@0 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1062,7 +1068,7 @@ }; segment@10000 { /* 0x4a310000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -1231,7 +1237,7 @@ }; segment@20000 { /* 0x4a320000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ @@ -1284,7 +1290,10 @@ }; &l4_per { /* 0x48000000 */ - compatible = "ti,omap4-l4-per", "simple-bus"; + compatible = "ti,omap4-l4-per", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -1298,7 +1307,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2437,7 +2446,7 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 72e4f6481776..fc0be942dbeb 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -22,6 +22,11 @@ i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -54,14 +59,12 @@ }; /* - * Note that 4430 needs cross trigger interface (CTI) supported - * before we can configure the interrupts. This means sampling - * events are not supported for pmu. Note that 4460 does not use - * CTI, see also 4460.dtsi. + * Needed early by omap4_sram_init() for barrier, do not move to l3 + * interconnect as simple-pm-bus probes at module_init() time. */ - pmu { - compatible = "arm,cortex-a9-pmu"; - ti,hwmods = "debugss"; + ocmcram: sram@40304000 { + compatible = "mmio-sram"; + reg = <0x40304000 0xa000>; /* 40k */ }; gic: interrupt-controller@48241000 { @@ -97,19 +100,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - sram = <&ocmcram>; - }; - }; - - /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -117,16 +107,24 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "simple-bus"; + power-domains = <&prm_l4per>; + clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>, + <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>, + <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0x44000000 0x1000>, - <0x44800000 0x2000>, - <0x45000000 0x1000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,omap4-l3-noc"; + reg = <0x44000000 0x1000>, + <0x44800000 0x2000>, + <0x45000000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_wkup: interconnect@4a300000 { }; @@ -137,12 +135,22 @@ l4_per: interconnect@48000000 { }; - l4_abe: interconnect@40100000 { + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap4-mpu"; + sram = <&ocmcram>; + }; }; - ocmcram: sram@40304000 { - compatible = "mmio-sram"; - reg = <0x40304000 0xa000>; /* 40k */ + l4_abe: interconnect@40100000 { }; target-module@50000000 { @@ -198,6 +206,7 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; ti,sysc-delay-us = <2>; + power-domains = <&prm_cam>; clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -207,6 +216,27 @@ /* No child device binding, driver in staging */ }; + /* + * Note that 4430 needs cross trigger interface (CTI) supported + * before we can configure the interrupts. This means sampling + * events are not supported for pmu. Note that 4460 does not use + * CTI, see also 4460.dtsi. + */ + target-module@54000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "debugss"; + power-domains = <&prm_emu>; + clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54000000 0x1000000>; + + pmu: pmu { + compatible = "arm,cortex-a9-pmu"; + }; + }; + target-module@55082000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x55082000 0x4>, @@ -256,35 +286,70 @@ /* No child device binding or driver in mainline */ }; - dmm@4e000000 { - compatible = "ti,omap4-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "dmm"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap4-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; }; - emif1: emif@4c000000 { - compatible = "ti,emif-4d"; - reg = <0x4c000000 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; ti,hwmods = "emif1"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif1: emif@0 { + compatible = "ti,emif-4d"; + reg = <0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; - emif2: emif@4d000000 { - compatible = "ti,emif-4d"; - reg = <0x4d000000 0x100>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + target-module@4d000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; ti,hwmods = "emif2"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + reg = <0x4d000000 0x4>; + reg-names = "rev"; + clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000000 0x1000000>; + + emif2: emif@0 { + compatible = "ti,emif-4d"; + reg = <0 0x100>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; dsp: dsp { @@ -435,6 +500,7 @@ <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_gfx>; clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 2d3e54901b6e..3d6db1db94e0 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -26,13 +26,6 @@ }; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "debugss"; - }; - thermal-zones { #include "omap4-cpu-thermal.dtsi" }; @@ -128,4 +121,10 @@ <0x00030000 0x00030000 0x00010000>; }; +&pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; +}; + /include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 532868591107..1f1c04d8f472 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -770,14 +770,6 @@ ti,max-div = <2>; }; - sha2md5_fck: sha2md5_fck@15c8 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15c8>; - }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 887b3359dd5a..b148b289e830 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1,5 +1,8 @@ &l4_cfg { /* 0x4a000000 */ - compatible = "ti,omap5-l4-cfg", "simple-bus"; + compatible = "ti,omap5-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -15,7 +18,7 @@ <0x00300000 0x4a300000 0x080000>; /* segment 6 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -391,7 +394,7 @@ }; segment@80000 { /* 0x4a080000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ @@ -654,7 +657,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */ @@ -691,22 +694,44 @@ }; target-module@40000 { /* 0x4a140000, ap 101 16.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x400fc 4>, + <0x41100 4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_l3init>; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>; + clock-names = "fck"; #size-cells = <1>; + #address-cells = <1>; ranges = <0x0 0x40000 0x10000>; + + sata: sata@0 { + compatible = "snps,dwc-ahci"; + reg = <0 0x1100>, <0x1100 0x8>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + ports-implemented = <0x1>; + }; }; }; segment@180000 { /* 0x4a180000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */ @@ -912,20 +937,23 @@ }; segment@280000 { /* 0x4a280000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@300000 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_per { /* 0x48000000 */ - compatible = "ti,omap5-l4-per", "simple-bus"; + compatible = "ti,omap5-l4-per", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -939,7 +967,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2148,14 +2176,17 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_wkup { /* 0x4ae00000 */ - compatible = "ti,omap5-l4-wkup", "simple-bus"; + compatible = "ti,omap5-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkupaon>; + clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4ae00000 0x800>, <0x4ae00800 0x800>, <0x4ae01000 0x1000>; @@ -2167,7 +2198,7 @@ <0x00020000 0x4ae20000 0x010000>; /* segment 2 */ segment@0 { /* 0x4ae00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2296,7 +2327,7 @@ }; segment@10000 { /* 0x4ae10000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -2423,7 +2454,7 @@ }; segment@20000 { /* 0x4ae20000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e025b7c9a357..681fee379b88 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -25,6 +25,11 @@ i2c2 = &i2c3; i2c3 = &i2c4; i2c4 = &i2c5; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -101,6 +106,15 @@ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; }; + /* + * Needed early by omap4_sram_init() for barrier, do not move to l3 + * interconnect as simple-pm-bus probes at module_init() time. + */ + ocmcram: sram@40300000 { + compatible = "mmio-sram"; + reg = <0 0x40300000 0 0x20000>; /* 128k */ + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; @@ -121,19 +135,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - sram = <&ocmcram>; - }; - }; - - /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -141,17 +142,25 @@ * hierarchy. */ ocp { - compatible = "ti,omap5-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>, + <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>, + <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xc0000000>; dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0 0x44000000 0 0x2000>, - <0 0x44800000 0 0x3000>, - <0 0x45000000 0 0x4000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,omap5-l3-noc"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>, + <0x45000000 0x4000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_wkup: interconnect@4ae00000 { }; @@ -162,31 +171,58 @@ l4_per: interconnect@48000000 { }; - l4_abe: interconnect@40100000 { + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap4-mpu"; + sram = <&ocmcram>; + }; }; - ocmcram: sram@40300000 { - compatible = "mmio-sram"; - reg = <0x40300000 0x20000>; /* 128k */ + l4_abe: interconnect@40100000 { }; - gpmc: gpmc@50000000 { - compatible = "ti,omap4430-gpmc"; - reg = <0x50000000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 4>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - ti,hwmods = "gpmc"; - clocks = <&l3_iclk_div>; + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + ti,no-idle-on-init; + clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>; clock-names = "fck"; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; target-module@55082000 { @@ -241,35 +277,70 @@ status = "disabled"; }; - dmm@4e000000 { - compatible = "ti,omap5-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "dmm"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap5-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; }; - emif1: emif@4c000000 { - compatible = "ti,emif-4d5"; - ti,hwmods = "emif1"; - ti,no-idle-on-init; - phy-type = <2>; /* DDR PHY type: Intelli PHY */ - reg = <0x4c000000 0x400>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "emif1"; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif1: emif@0 { + compatible = "ti,emif-4d5"; + reg = <0 0x400>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; - emif2: emif@4d000000 { - compatible = "ti,emif-4d5"; - ti,hwmods = "emif2"; - ti,no-idle-on-init; - phy-type = <2>; /* DDR PHY type: Intelli PHY */ - reg = <0x4d000000 0x400>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4d000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "emif2"; + reg = <0x4d000000 0x4>; + reg-names = "rev"; + clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000000 0x1000000>; + + emif2: emif@0 { + compatible = "ti,emif-4d5"; + reg = <0 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; aes1_target: target-module@4b501000 { @@ -369,18 +440,6 @@ #thermal-sensor-cells = <1>; }; - /* OCP2SCP3 */ - sata: sata@4a141100 { - compatible = "snps,dwc-ahci"; - reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - phys = <&sata_phy>; - phy-names = "sata-phy"; - clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; - ti,hwmods = "sata"; - ports-implemented = <0x1>; - }; - target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x5600fe00 0x4>, diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 4fd09997a2b9..a16a00fb5fa5 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -317,8 +317,8 @@ // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2900000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; /* BUG: If turned off MMC will be affected. */ regulator-always-on; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi index e024520f4d47..8d59202cebd6 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -1,14 +1,89 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * Device Tree for the TVK1281618 R2 UIB + * Device Tree for the TVK1281618 R2 user interface board (UIB) */ -#include "ste-href-tvk1281618.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; + + button@139 { + /* Proximity sensor */ + gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; + linux,code = <11>; /* SW_FRONT_PROXIMITY */ + label = "SFH7741 Proximity Sensor"; + }; + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { + i2c@80004000 { + tc35893@44 { + compatible = "toshiba,tc35893"; + reg = <0x44>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35893_tvk_mode>; + + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + + tc3589x_gpio { + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + wakeup-source; + linux,keymap = <MATRIX_KEY(3, 1, KEY_END)>, + <MATRIX_KEY(4, 1, KEY_HOME)>, + <MATRIX_KEY(6, 4, KEY_VOLUMEDOWN)>, + <MATRIX_KEY(4, 2, KEY_EMAIL)>, + <MATRIX_KEY(3, 3, KEY_RIGHT)>, + <MATRIX_KEY(2, 5, KEY_BACKSPACE)>, + <MATRIX_KEY(6, 7, KEY_MENU)>, + <MATRIX_KEY(5, 0, KEY_ENTER)>, + <MATRIX_KEY(4, 3, KEY_0)>, + <MATRIX_KEY(3, 4, KEY_DOT)>, + <MATRIX_KEY(5, 2, KEY_UP)>, + <MATRIX_KEY(3, 5, KEY_DOWN)>, + <MATRIX_KEY(4, 5, KEY_SEND)>, + <MATRIX_KEY(0, 5, KEY_BACK)>, + <MATRIX_KEY(6, 2, KEY_VOLUMEUP)>, + <MATRIX_KEY(1, 3, KEY_SPACE)>, + <MATRIX_KEY(7, 6, KEY_LEFT)>, + <MATRIX_KEY(5, 5, KEY_SEARCH)>; + }; + }; + }; + i2c@80128000 { - lsm303dlh@18 { + accelerometer@18 { /* Accelerometer */ compatible = "st,lsm303dlh-accel"; st,drdy-int-pin = <1>; @@ -30,7 +105,7 @@ * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; */ }; - lsm303dlh@1e { + magnetometer@1e { /* Magnetometer */ compatible = "st,lsm303dlh-magn"; reg = <0x1e>; @@ -48,7 +123,7 @@ * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; */ }; - lis331dl@1c { + accelerometer@1c { /* Accelerometer */ compatible = "st,lis331dl-accel"; st,drdy-int-pin = <1>; @@ -62,6 +137,72 @@ interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; }; + magnetometer@f { + /* Magnetometer */ + compatible = "asahi-kasei,ak8974"; + reg = <0x0f>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_magn_tvk_mode>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>; + */ + }; + gyroscope@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_magn_tvk_mode>; + interrupts-extended = + <&gpio1 0 IRQ_TYPE_EDGE_RISING>, + <&gpio0 31 IRQ_TYPE_EDGE_RISING>; + }; + pressure@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; + i2c@80110000 { + synaptics@4b { + /* Synaptics RMI4 TM1217 touchscreen */ + compatible = "syna,rmi4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4b>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&synaptics_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + /* This is a landscape display */ + touchscreen-swapped-x-y; + }; + }; }; mcde@a0350000 { status = "okay"; @@ -75,5 +216,68 @@ }; }; }; + pinctrl { + prox { + prox_tvk_mode: prox_tvk { + tvk_cfg { + pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + hall { + hall_tvk_mode: hall_tvk { + tvk_cfg { + pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + tc35893 { + /* IRQ from the TC35893 */ + tc35893_tvk_mode: tc35893_tvk { + tvk_cfg { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + accelerometer { + accel_tvk_mode: accel_tvk { + /* Accelerometer interrupt lines 1 & 2 */ + tvk_cfg { + pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + gyroscope { + /* + * These lines are shared between Gyroscope l3g400dh + * and AK8974 magnetometer. + */ + gyro_magn_tvk_mode: gyro_magn_tvk { + /* GPIO 31 used for INT pull down the line */ + tvk_cfg1 { + pins = "GPIO31_V3"; + ste,config = <&gpio_in_pd>; + }; + /* GPIO 32 used for DRDY, pull this down */ + tvk_cfg2 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + synaptics { + synaptics_tvk_mode: synaptics_tvk { + /* Touchscreen uses GPIO 84 */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi index cb3677f0a1cb..70f058352efc 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -1,44 +1,152 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * Device Tree for the TVK1281618 R2 UIB + * Device Tree for the TVK1281618 R3 user interface board (UIB) + * also known as the "CYTTSP board" */ -#include "ste-href-tvk1281618.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&hall_tvk_mode>; + + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { - i2c@80128000 { - /* Marked: - * 129 - * M35 - * L3GD20 - */ - l3gd20@6a { - /* Gyroscope */ - compatible = "st,l3gd20"; + i2c@80004000 { + tc35893@44 { + compatible = "toshiba,tc35893"; + reg = <0x44>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35893_tvk_mode>; + + interrupt-controller; + #interrupt-cells = <1>; status = "disabled"; + + tc3589x_gpio { + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + wakeup-source; + linux,keymap = <MATRIX_KEY(3, 1, KEY_END)>, + <MATRIX_KEY(4, 1, KEY_HOME)>, + <MATRIX_KEY(6, 4, KEY_VOLUMEDOWN)>, + <MATRIX_KEY(4, 2, KEY_EMAIL)>, + <MATRIX_KEY(3, 3, KEY_RIGHT)>, + <MATRIX_KEY(2, 5, KEY_BACKSPACE)>, + <MATRIX_KEY(6, 7, KEY_MENU)>, + <MATRIX_KEY(5, 0, KEY_ENTER)>, + <MATRIX_KEY(4, 3, KEY_0)>, + <MATRIX_KEY(3, 4, KEY_DOT)>, + <MATRIX_KEY(5, 2, KEY_UP)>, + <MATRIX_KEY(3, 5, KEY_DOWN)>, + <MATRIX_KEY(4, 5, KEY_SEND)>, + <MATRIX_KEY(0, 5, KEY_BACK)>, + <MATRIX_KEY(6, 2, KEY_VOLUMEUP)>, + <MATRIX_KEY(1, 3, KEY_SPACE)>, + <MATRIX_KEY(7, 6, KEY_LEFT)>, + <MATRIX_KEY(5, 5, KEY_SEARCH)>; + }; + }; + }; + + i2c@80128000 { + accelerometer@19 { + compatible = "st,lsm303dlhc-accel"; st,drdy-int-pin = <1>; - drive-open-drain; - reg = <0x6a>; // 0x6a or 0x6b + reg = <0x19>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; }; - /* - * Marked: - * 2122 - * C3H - * DQEEE - * LIS3DH? - */ - lis3dh@18 { - /* Accelerometer */ - compatible = "st,lis3dh-accel"; + magnetometer@1e { + compatible = "st,lsm303dlm-magn"; st,drdy-int-pin = <1>; - reg = <0x18>; + reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + // This interrupt is not properly working with the driver + // interrupt-parent = <&gpio1>; + // interrupts = <0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; - pinctrl-0 = <&accel_tvk_mode>; + pinctrl-0 = <&magn_tvk_mode>; + }; + gyroscope@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + pressure@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; + + spi@80111000 { + num-cs = <1>; + cs-gpios = <&gpio6 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_default_mode>; + status = "okay"; + + touchscreen@0 { + compatible = "cypress,cy8ctma340"; + /* + * Actually the max frequency is 6 MHz, but over 2 MHz the + * data rate needs to be restricted to max 2Mbps which the + * SPI framework cannot handle. + */ + spi-max-frequency = <2000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + vcpin-supply = <&ab8500_ldo_aux1_reg>; + vdd-supply = <&db8500_vsmps2_reg>; + reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <480>; + touchscreen-size-y = <854>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + pinctrl-names = "default"; + pinctrl-0 = <&cyttsp_tvk_mode>; }; }; @@ -54,5 +162,57 @@ }; }; }; + + pinctrl { + hall { + hall_tvk_mode: hall_tvk { + tvk_cfg { + pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + tc35893 { + /* IRQ from the TC35893 */ + tc35893_tvk_mode: tc35893_tvk { + tvk_cfg { + pins = "GPIO64_F3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + accelerometer { + accel_tvk_mode: accel_tvk { + /* Accelerometer interrupt lines 1 & 2 */ + tvk_cfg { + pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + magnetometer { + magn_tvk_mode: magn_tvk { + /* GPIO 32 used for DRDY, pull this down */ + tvk_cfg { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + cyttsp { + cyttsp_tvk_mode: cyttsp_tvk { + /* Touchscreen uses GPIO84 for IRQ */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + /* GPIO143 is reset */ + tvk_cfg2 { + pins = "GPIO143_D12"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi deleted file mode 100644 index e1dbfae22595..000000000000 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ /dev/null @@ -1,218 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2012 ST-Ericsson AB - * - * Device Tree for the TVK1281618 family of UIBs - */ - -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; - - button@139 { - /* Proximity sensor */ - gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; - linux,code = <11>; /* SW_FRONT_PROXIMITY */ - label = "SFH7741 Proximity Sensor"; - }; - button@145 { - /* Hall sensor */ - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; - linux,code = <0>; /* SW_LID */ - label = "HED54XXU11 Hall Effect Sensor"; - }; - }; - - soc { - i2c@80004000 { - tc35893@44 { - compatible = "toshiba,tc35893"; - reg = <0x44>; - interrupt-parent = <&gpio6>; - interrupts = <26 IRQ_TYPE_EDGE_RISING>; - pinctrl-names = "default"; - pinctrl-0 = <&tc35893_tvk_mode>; - - interrupt-controller; - #interrupt-cells = <1>; - - tc3589x_gpio { - compatible = "toshiba,tc3589x-gpio"; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - tc3589x_keypad { - compatible = "toshiba,tc3589x-keypad"; - interrupts = <6>; - debounce-delay-ms = <4>; - keypad,num-columns = <8>; - keypad,num-rows = <8>; - linux,no-autorepeat; - wakeup-source; - linux,keymap = <0x0301006b - 0x04010066 - 0x06040072 - 0x040200d7 - 0x0303006a - 0x0205000e - 0x0607008b - 0x0500001c - 0x0403000b - 0x03040034 - 0x05020067 - 0x0305006c - 0x040500e7 - 0x0005009e - 0x06020073 - 0x01030039 - 0x07060069 - 0x050500d9>; - }; - }; - }; - /* Sensors mounted on all board variants */ - i2c@80128000 { - ak8974@f { - /* Magnetometer */ - compatible = "asahi-kasei,ak8974"; - reg = <0x0f>; - avdd-supply = <&ab8500_ldo_aux1_reg>; - dvdd-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&gyro_magn_tvk_mode>; - /* - * These interrupts cannot be used: the other component - * ST-Micro L3D4200D gyro that is connected to the same lines - * cannot set its DRDY line to open drain, so it cannot be - * shared with other peripherals. The should be defined for - * the falling edge if they could be wired together. - * - * interrupts-extended = - * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, - * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>; - */ - }; - l3g4200d@68 { - /* Gyroscope */ - compatible = "st,l3g4200d-gyro"; - st,drdy-int-pin = <2>; - reg = <0x68>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&gyro_magn_tvk_mode>; - interrupts-extended = - <&gpio1 0 IRQ_TYPE_EDGE_RISING>, - <&gpio0 31 IRQ_TYPE_EDGE_RISING>; - }; - lsp001wm@5c { - /* Barometer/pressure sensor */ - compatible = "st,lps001wp-press"; - reg = <0x5c>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - }; - }; - - i2c@80110000 { - synaptics@4b { - /* Synaptics RMI4 TM1217 touchscreen */ - compatible = "syna,rmi4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x4b>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&synaptics_tvk_mode>; - interrupt-parent = <&gpio2>; - interrupts = <20 IRQ_TYPE_EDGE_FALLING>; - - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; - rmi-f11@11 { - reg = <0x11>; - touchscreen-inverted-x; - syna,sensor-type = <1>; - }; - }; - }; - - pinctrl { - /* Pull up this GPIO pin */ - tc35893 { - tc35893_tvk_mode: tc35893_tvk { - tvk_cfg { - pins = "GPIO218_AH11"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - prox { - prox_tvk_mode: prox_tvk { - tvk_cfg { - pins = "GPIO217_AH12"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - hall { - hall_tvk_mode: hall_tvk { - tvk_cfg { - pins = "GPIO145_C13"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - accelerometer { - accel_tvk_mode: accel_tvk { - /* Accelerometer interrupt lines 1 & 2 */ - tvk_cfg { - pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pd>; - }; - }; - }; - gyroscope { - /* - * These lines are shared between Gyroscope l3g400dh - * and AK8974 magnetometer. - */ - gyro_magn_tvk_mode: gyro_magn_tvk { - /* GPIO 31 used for INT pull down the line */ - tvk_cfg1 { - pins = "GPIO31_V3"; - ste,config = <&gpio_in_pd>; - }; - /* GPIO 32 used for DRDY, pull this down */ - tvk_cfg2 { - pins = "GPIO32_V2"; - ste,config = <&gpio_in_pd>; - }; - }; - }; - synaptics { - synaptics_tvk_mode: synaptics_tvk { - /* Touchscreen uses GPIO 84 */ - tvk_cfg1 { - pins = "GPIO84_C2"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts index a036a03f6718..4201547c5988 100644 --- a/arch/arm/boot/dts/ste-href520-tvk.dts +++ b/arch/arm/boot/dts/ste-href520-tvk.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * Device Tree for the HREF520 version with the TVK1281618 UIB + * Device Tree for the HREF520 version with the TVK1281618 R3 UIB */ /dts-v1/; @@ -9,7 +9,7 @@ #include "ste-href-tvk1281618-r3.dtsi" / { - model = "ST-Ericsson HREF520 and TVK1281618 UIB"; + model = "ST-Ericsson HREF520 and TVK1281618 R3 UIB"; compatible = "st-ericsson,href520", "st-ericsson,u8500"; diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 4e6e4439dcff..75506339a93c 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -9,7 +9,7 @@ #include "ste-href-tvk1281618-r2.dtsi" / { - model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; + model = "ST-Ericsson HREF (pre-v60) and TVK1281618 R2 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; /* ST6G3244ME level translator for 1.8/2.9 V */ diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index 9c2d2ee6d6d8..2db2f8be8b03 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -2,7 +2,7 @@ /* * Copyright 2012 ST-Ericsson AB * - * Device Tree for the HREF version 60 or later with the TVK1281618 UIB + * Device Tree for the HREF version 60 or later with the TVK1281618 R2 UIB */ /dts-v1/; @@ -11,7 +11,7 @@ #include "ste-href-tvk1281618-r2.dtsi" / { - model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; + model = "ST-Ericsson HREF (v60+) and TVK1281618 R2 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; /* ST6G3244ME level translator for 1.8/2.9 V */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index 7411bfeda285..f24369873ce2 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -135,21 +135,22 @@ /* * This regulator is a GPIO line that drives the Broadcom WLAN - * line BT_VREG_EN high and enables the internal regulators - * inside the chip. + * line WL_REG_ON high and enables the internal regulators + * inside the chip. Unfortunatley it is erroneously named + * WLAN_RST_N on the schematic but it is not a reset line. * * The voltage specified here is only used to determine the OCR mask, * the for the SDIO connector, the chip is actually connected * directly to VBAT. */ - wl_bt_reg: regulator-gpio-wlan { + wl_reg: regulator-gpio-wlan { compatible = "regulator-fixed"; - regulator-name = "BT_VREG_EN"; + regulator-name = "WL_REG_ON"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; startup-delay-us = <100000>; - /* GPIO222 (BT_VREG_EN) */ - gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; + /* GPIO215 (WLAN_RST_N to WL_REG_ON) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&wlan_ldo_en_default>; @@ -390,11 +391,10 @@ pinctrl-1 = <&mc1_a_2_sleep>; /* * GPIO-controlled voltage enablement: this drives - * the BT_VREG_EN line high when we use this device. - * Represented as regulator to fill OCR mask and to - * be usable in parallel with the Bluetooth chip. + * the WL_REG_ON line high when we use this device. + * Represented as regulator to fill OCR mask. */ - vmmc-supply = <&wl_bt_reg>; + vmmc-supply = <&wl_reg>; #address-cells = <1>; #size-cells = <0>; @@ -408,9 +408,6 @@ interrupt-parent = <&gpio6>; interrupts = <24 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "host-wake"; - /* GPIO215 WLAN_RST_N */ - /* FIXME: kernel does not use this assert/deassert */ - reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&wlan_default_mode>; }; @@ -440,15 +437,8 @@ bluetooth { compatible = "brcm,bcm4330-bt"; - /* - * We actually have shutdown-gpios, BT_VREG_EN on GPIO222, - * but since this GPIO is shared with the WLAN chip, we need - * to reference the regulator instead. The regulator - * framework will reference count the GPIO usage and - * make sure we can use the same GPIO for several supplies. - */ - // shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; - vbat-supply = <&wl_bt_reg>; + /* GPIO222 rail BT_VREG_EN to BT_REG_ON */ + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; /* BT_WAKE on GPIO199 */ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; /* BT_HOST_WAKE on GPIO97 */ @@ -759,9 +749,9 @@ /* GPIO that enables the WLAN internal LDO regulators */ wlan-ldo { wlan_ldo_en_default: wlan_ldo_default { - /* GPIO222 BT_VREG_ON */ + /* GPIO215 named WLAN_RST_N */ janice_cfg1 { - pins = "GPIO222_AJ9"; + pins = "GPIO215_AH13"; ste,config = <&gpio_out_lo>; }; }; @@ -875,11 +865,6 @@ }; wlan { wlan_default_mode: wlan_default { - /* GPIO215 used for RESET_N */ - janice_cfg1 { - pins = "GPIO215_AH13"; - ste,config = <&gpio_out_lo>; - }; /* GPIO216 for WL_HOST_WAKE */ janice_cfg2 { pins = "GPIO216_AG12"; @@ -889,14 +874,17 @@ }; bluetooth { bluetooth_default_mode: bluetooth_default { + /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */ janice_cfg1 { - pins = "GPIO199_AH23"; + pins = "GPIO199_AH23", "GPIO222_AJ9"; ste,config = <&gpio_out_lo>; }; + /* GPIO97 BT_HOST_WAKE */ janice_cfg2 { pins = "GPIO97_D9"; ste,config = <&gpio_in_nopull>; }; + /* GPIO209 BT_RST_N */ janice_cfg3 { pins = "GPIO209_AG15"; ste,config = <&gpio_out_hi>; diff --git a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi new file mode 100644 index 000000000000..aa1bc3e10a49 --- /dev/null +++ b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi @@ -0,0 +1,275 @@ +/* + * Copyright 2017 - Alexandre Torgue <[email protected]> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */ + <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + ethernet_rmii: rmii-0 { + pins { + pinmux = <STM32_PINMUX('G', 11, AF11)>, + <STM32_PINMUX('G', 13, AF11)>, + <STM32_PINMUX('G', 12, AF11)>, + <STM32_PINMUX('C', 4, AF11)>, + <STM32_PINMUX('C', 5, AF11)>, + <STM32_PINMUX('A', 7, AF11)>, + <STM32_PINMUX('C', 1, AF11)>, + <STM32_PINMUX('A', 2, AF11)>, + <STM32_PINMUX('A', 1, AF11)>; + slew-rate = <2>; + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + spi1_pins: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, + /* SPI1_CLK */ + <STM32_PINMUX('B', 5, AF5)>; + /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 9, AF5)>; + /* SPI1_MISO */ + bias-disable; + }; + }; + + uart4_pins: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + usart1_pins: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart2_pins: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart3_pins: usart3-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */ + <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */ + <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg-hs-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */ + <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */ + <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */ + <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */ + <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */ + <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */ + <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */ + <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */ + <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */ + <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */ + <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */ + <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi deleted file mode 100644 index fa5dcb6a5fdd..000000000000 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright 2017 - Alexandre Torgue <[email protected]> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/pinctrl/stm32-pinfunc.h> - -/ { - soc { - pin-controller { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32h743-pinctrl"; - ranges = <0 0x58020000 0x3000>; - interrupt-parent = <&exti>; - st,syscfg = <&syscfg 0x8>; - pins-are-numbered; - - gpioa: gpio@58020000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc GPIOA_CK>; - st,bank-name = "GPIOA"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiob: gpio@58020400 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x400 0x400>; - clocks = <&rcc GPIOB_CK>; - st,bank-name = "GPIOB"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioc: gpio@58020800 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x800 0x400>; - clocks = <&rcc GPIOC_CK>; - st,bank-name = "GPIOC"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiod: gpio@58020c00 { - gpio-controller; - #gpio-cells = <2>; - reg = <0xc00 0x400>; - clocks = <&rcc GPIOD_CK>; - st,bank-name = "GPIOD"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioe: gpio@58021000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc GPIOE_CK>; - st,bank-name = "GPIOE"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiof: gpio@58021400 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1400 0x400>; - clocks = <&rcc GPIOF_CK>; - st,bank-name = "GPIOF"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiog: gpio@58021800 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1800 0x400>; - clocks = <&rcc GPIOG_CK>; - st,bank-name = "GPIOG"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioh: gpio@58021c00 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1c00 0x400>; - clocks = <&rcc GPIOH_CK>; - st,bank-name = "GPIOH"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioi: gpio@58022000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc GPIOI_CK>; - st,bank-name = "GPIOI"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioj: gpio@58022400 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x2400 0x400>; - clocks = <&rcc GPIOJ_CK>; - st,bank-name = "GPIOJ"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiok: gpio@58022800 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x2800 0x400>; - clocks = <&rcc GPIOK_CK>; - st,bank-name = "GPIOK"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2c1_pins_a: i2c1-0 { - pins { - pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */ - <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - ethernet_rmii: rmii-0 { - pins { - pinmux = <STM32_PINMUX('G', 11, AF11)>, - <STM32_PINMUX('G', 13, AF11)>, - <STM32_PINMUX('G', 12, AF11)>, - <STM32_PINMUX('C', 4, AF11)>, - <STM32_PINMUX('C', 5, AF11)>, - <STM32_PINMUX('A', 7, AF11)>, - <STM32_PINMUX('C', 1, AF11)>, - <STM32_PINMUX('A', 2, AF11)>, - <STM32_PINMUX('A', 1, AF11)>; - slew-rate = <2>; - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - pins2{ - pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - pins2{ - pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */ - bias-pull-up; - }; - }; - - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ - <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */ - }; - }; - - usart1_pins: usart1-0 { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */ - bias-disable; - }; - }; - - usart2_pins: usart2-0 { - pins1 { - pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ - bias-disable; - }; - }; - - usbotg_hs_pins_a: usbotg-hs-0 { - pins { - pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */ - <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */ - <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */ - <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */ - <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */ - <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */ - <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */ - <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */ - <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */ - <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */ - <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */ - <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */ - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 4ebffb0a45a3..05ecdf9ff03a 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -135,6 +135,22 @@ clocks = <&rcc USART2_CK>; }; + usart3: serial@40004800 { + compatible = "st,stm32h7-uart"; + reg = <0x40004800 0x400>; + interrupts = <39>; + status = "disabled"; + clocks = <&rcc USART3_CK>; + }; + + uart4: serial@40004c00 { + compatible = "st,stm32h7-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + status = "disabled"; + clocks = <&rcc UART4_CK>; + }; + i2c1: i2c@40005400 { compatible = "st,stm32f7-i2c"; #address-cells = <1>; @@ -159,7 +175,7 @@ status = "disabled"; }; - i2c3: i2c@40005C00 { + i2c3: i2c@40005c00 { compatible = "st,stm32f7-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -368,6 +384,21 @@ max-frequency = <120000000>; }; + sdmmc2: mmc@48022400 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x48022400 0x400>; + interrupts = <124>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC2_CK>; + clock-names = "apb_pclk"; + resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + exti: interrupt-controller@58000000 { compatible = "st,stm32h7-exti"; interrupt-controller; @@ -392,7 +423,7 @@ status = "disabled"; }; - i2c4: i2c@58001C00 { + i2c4: i2c@58001c00 { compatible = "st,stm32f7-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -555,6 +586,148 @@ snps,pbl = <8>; status = "disabled"; }; + + pinctrl: pin-controller@58020000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32h743-pinctrl"; + ranges = <0 0x58020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; + pins-are-numbered; + + gpioa: gpio@58020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA_CK>; + st,bank-name = "GPIOA"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@58020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc GPIOB_CK>; + st,bank-name = "GPIOB"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@58020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc GPIOC_CK>; + st,bank-name = "GPIOC"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@58020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc GPIOD_CK>; + st,bank-name = "GPIOD"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@58021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOE_CK>; + st,bank-name = "GPIOE"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@58021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc GPIOF_CK>; + st,bank-name = "GPIOF"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@58021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc GPIOG_CK>; + st,bank-name = "GPIOG"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@58021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc GPIOH_CK>; + st,bank-name = "GPIOH"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@58022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOI_CK>; + st,bank-name = "GPIOI"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@58022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc GPIOJ_CK>; + st,bank-name = "GPIOJ"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@58022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc GPIOK_CK>; + st,bank-name = "GPIOK"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index e446d311c520..59e01ce10318 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -42,7 +42,7 @@ /dts-v1/; #include "stm32h743.dtsi" -#include "stm32h743-pinctrl.dtsi" +#include "stm32h7-pinctrl.dtsi" / { model = "STMicroelectronics STM32H743i-Discovery board"; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 8f398178f5e5..38cc7faf6884 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -42,7 +42,7 @@ /dts-v1/; #include "stm32h743.dtsi" -#include "stm32h743-pinctrl.dtsi" +#include "stm32h7-pinctrl.dtsi" / { model = "STMicroelectronics STM32H743i-EVAL board"; diff --git a/arch/arm/boot/dts/stm32h750.dtsi b/arch/arm/boot/dts/stm32h750.dtsi new file mode 100644 index 000000000000..41e3b1e3a874 --- /dev/null +++ b/arch/arm/boot/dts/stm32h750.dtsi @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright (C) STMicroelectronics 2021 - All Rights Reserved */ + +#include "stm32h743.dtsi" + + diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts new file mode 100644 index 000000000000..9bb73bb61901 --- /dev/null +++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2021 - Dillon Min <[email protected]> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * For art-pi board resources, you can refer to link: + * https://art-pi.gitee.io/website/ + */ + +/dts-v1/; +#include "stm32h750.dtsi" +#include "stm32h7-pinctrl.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "RT-Thread STM32H750i-ART-PI board"; + compatible = "st,stm32h750i-art-pi", "st,stm32h750"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:2000000n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x2000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + no-map; + size = <0x100000>; + linux,dma-default; + }; + }; + + aliases { + serial0 = &uart4; + serial1 = &usart3; + }; + + leds { + compatible = "gpio-leds"; + led-red { + gpios = <&gpioi 8 0>; + }; + led-green { + gpios = <&gpioc 15 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wlan_pwr: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; +}; + +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + broken-cd; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&wlan_pwr>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>; + dmas = <&dmamux1 37 0x400 0x05>, + <&dmamux1 38 0x400 0x05>; + dma-names = "rx", "tx"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + + partition@0 { + label = "root filesystem"; + reg = <0 0x1000000>; + }; + }; +}; + +&usart2 { + pinctrl-0 = <&usart2_pins>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins>; + dmas = <&dmamux1 45 0x400 0x05>, + <&dmamux1 46 0x400 0x05>; + dma-names = "rx", "tx"; + st,hw-flow-ctrl; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>; + max-speed = <115200>; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + + diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 7b4249ed1983..060baa8b7e9d 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1891,10 +1891,15 @@ usart2_idle_pins_c: usart2-idle-2 { pins1 { pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */ - <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins3 { pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ bias-disable; }; @@ -1940,10 +1945,15 @@ usart3_idle_pins_b: usart3-idle-1 { pins1 { pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ - <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ bias-disable; }; @@ -1976,10 +1986,15 @@ usart3_idle_pins_c: usart3-idle-2 { pins1 { pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ - <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ bias-disable; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 4b8031782555..fb80d53e6be2 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -493,6 +493,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -508,6 +509,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -523,6 +525,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -538,6 +541,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -1421,11 +1425,13 @@ "mac-clk-tx", "mac-clk-rx", "eth-ck", + "ptp_ref", "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, <&rcc ETHCK_K>, + <&rcc ETHPTP_K>, <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; @@ -1536,6 +1542,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -1573,6 +1580,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts index 02a39132958e..b4e504f026ce 100644 --- a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts +++ b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts @@ -20,6 +20,10 @@ "st,stm32mp153"; }; +&cryp1 { + status = "okay"; +}; + &m_can1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts new file mode 100644 index 000000000000..d3058a036c74 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-icore-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam i.Core STM32MP1 C.TOUCH 2.0"; + compatible = "engicam,icore-stm32mp1-ctouch2", + "engicam,icore-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts new file mode 100644 index 000000000000..ec9f1d1cd50f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-icore-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-stm32mp1-edimm2.2", + "engicam,icore-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi new file mode 100644 index 000000000000..01166ccacf2b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,icore-stm32mp1", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + vddcore: regulator-vddcore { + compatible = "regulator-fixed"; + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd: regulator-vdd { + compatible = "regulator-fixed"; + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_usb: regulator-vdd-usb { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdda: regulator-vdda { + compatible = "regulator-fixed"; + regulator-name = "vdda"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_ddr: regulator-vdd-ddr { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vtt_ddr: regulator-vtt-ddr { + compatible = "regulator-fixed"; + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <675000>; + regulator-always-on; + vin-supply = <&vdd>; + }; + + vref_ddr: regulator-vref-ddr { + compatible = "regulator-fixed"; + regulator-name = "vref_ddr"; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <675000>; + regulator-always-on; + vin-supply = <&vdd>; + }; + + vdd_sd: regulator-vdd-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v2v8: regulator-v2v8 { + compatible = "regulator-fixed"; + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&v3v3>; + }; + + v1v8: regulator-v1v8 { + compatible = "regulator-fixed"; + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&v3v3>; + }; +}; + +&dts { + status = "okay"; +}; + +&i2c2 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <185>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + status = "okay"; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2{ + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc{ + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc{ + status = "okay"; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts new file mode 100644 index 000000000000..674b2d330dc4 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-microgea-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame"; + compatible = "engicam,microgea-stm32mp1-microdev2.0-of7", + "engicam,microgea-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + serial1 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>; + default-on; + }; + + lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + power-supply = <&panel_pwr>; + }; + + panel_pwr: regulator-panel-pwr { + compatible = "regulator-fixed"; + regulator-name = "panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; + + panel { + compatible = "auo,b101aw03"; + backlight = <&backlight>; + enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>; + power-supply = <&lcd_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; +}; + +&i2c2 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <185>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default"; + pinctrl-0 = <<dc_pins>; + status = "okay"; + + port { + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pinctrl { + ltdc_pins: ltdc { + pins { + pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */ + <STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */ + <STM32_PINMUX('H', 11, AF14)>, /* LTDC_R5 */ + <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */ + <STM32_PINMUX('D', 9, AF14)>, /* LTDC_B0 */ + <STM32_PINMUX('E', 5, AF14)>, /* LTDC_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LTDC_G1 */ + <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */ + <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */ + <STM32_PINMUX('G', 7, AF14)>, /* LTDC_CLK */ + <STM32_PINMUX('G', 12, AF14)>, /* LTDC_B1 */ + <STM32_PINMUX('H', 2, AF14)>, /* LTDC_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LTDC_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */ + <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LTDC_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LTDC_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LTDC_G7 */ + <STM32_PINMUX('I', 4, AF14)>, /* LTDC_B4 */ + <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LTDC_B6 */ + <STM32_PINMUX('I', 7, AF14)>, /* LTDC_B7 */ + <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */ + <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&vdd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; + +/* J31: RS323 */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts new file mode 100644 index 000000000000..7a75868164dc --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-microgea-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 Carrier Board"; + compatible = "engicam,microgea-stm32mp1-microdev2.0", + "engicam,microgea-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + serial1 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&vdd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; + +/* J31: RS323 */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi new file mode 100644 index 000000000000..0b85175f151e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,microgea-stm32mp1", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x10000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddcore: regulator-vddcore { + compatible = "regulator-fixed"; + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <&vin>; + }; + + vdd: regulator-vdd { + compatible = "regulator-fixed"; + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vin>; + }; + + vddq_ddr: regulator-vddq-ddr { + compatible = "regulator-fixed"; + regulator-name = "vddq_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vin>; + }; +}; + +&dts { + status = "okay"; +}; + +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_a>; + pinctrl-1 = <&fmc_sleep_pins_a>; + status = "okay"; + + nand-controller@4,0 { + status = "okay"; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2{ + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc{ + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc{ + status = "okay"; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts index d3b81382f97c..6dd8216c235e 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -20,6 +20,10 @@ "st,stm32mp157"; }; +&cryp1 { + status = "okay"; +}; + &m_can1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts index cfb8f8a0c82d..7067a860aaff 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts @@ -20,6 +20,10 @@ "st,stm32mp157"; }; +&cryp1 { + status = "okay"; +}; + &m_can1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index fad23d6f69b8..fb45c5aa878d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -43,15 +43,15 @@ &gpiod { gpio-line-names = "", "", "", "", - "", "", "", "", - "", "", "", "Out1", - "Out2", "", "", ""; + "", "", "DHCOM-B", "", + "", "", "", "DRC02-Out1", + "DRC02-Out2", "", "", ""; }; &gpioi { - gpio-line-names = "In1", "", "", "", - "", "", "", "", - "In2", "", "", "", + gpio-line-names = "DRC02-In1", "DHCOM-O", "DHCOM-H", "DHCOM-I", + "DHCOM-R", "DHCOM-M", "", "", + "DRC02-In2", "", "", "", "", "", "", ""; /* diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index cd3a1798ca68..ba816ef8b9b2 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -57,22 +57,22 @@ &gpioc { gpio-line-names = "", "", "", "", - "", "", "In1", "", + "", "", "PicoITX-In1", "", "", "", "", "", "", "", "", ""; }; &gpiod { gpio-line-names = "", "", "", "", - "", "", "", "", - "", "", "", "Out1", - "Out2", "", "", ""; + "", "", "DHCOM-B", "", + "", "", "", "PicoITX-Out1", + "PicoITX-Out2", "", "", ""; }; &gpiog { - gpio-line-names = "In2", "", "", "", - "", "", "", "", + gpio-line-names = "PicoITX-In2", "", "", "", "", "", "", "", + "DHCOM-L", "", "", "", "", "", "", ""; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 2617815e42a6..272a1a67a9ad 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -92,6 +92,10 @@ }; }; +&crc1 { + status = "okay"; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; @@ -164,10 +168,70 @@ }; }; +&gpioa { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-K", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "", "", "", + "DHCOM-Q", "", "", "", + "", "", "", ""; +}; + &gpioc { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-E", "", + "", "", "", "", + "", "", "", ""; status = "okay"; }; +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-B", "", + "", "", "", "DHCOM-F", + "DHCOM-D", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-P", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiof { + gpio-line-names = "", "", "", "DHCOM-A", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "DHCOM-C", "", "", "", + "", "", "", "", + "DHCOM-L", "", "", "", + "", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "DHCOM-N", + "DHCOM-J", "DHCOM-W", "DHCOM-V", "DHCOM-U", + "DHCOM-T", "", "DHCOM-S", ""; +}; + +&gpioi { + gpio-line-names = "DHCOM-G", "DHCOM-O", "DHCOM-H", "DHCOM-I", + "DHCOM-R", "DHCOM-M", "", "", + "", "", "", "", + "", "", "", ""; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index b09e87fe901a..64dca5b7f748 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -162,6 +162,41 @@ }; }; +&gpioa { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "AV96-K", + "AV96-I", "", "AV96-A", ""; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "AV96-J", "", "", + "", "", "", "AV96-B", + "", "AV96-L", "", ""; +}; + +&gpioc { + gpio-line-names = "", "", "", "AV96-C", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "AV96-D", "", "", "", + "", "", "AV96-E", "AV96-F"; +}; + +&gpiof { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "AV96-G", "AV96-H", "", ""; +}; + &i2c1 { /* X6 I2C1 */ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_b>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 803eb8bc9c85..013ae369791d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -21,6 +21,10 @@ }; }; +&crc1 { + status = "okay"; +}; + &dts { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi index 49d9420a3289..781ac8601030 100644 --- a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi @@ -128,24 +128,28 @@ opp-microvolt = <800000 800000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0003>; + opp-suspend; }; opp@204000000,950 { opp-microvolt = <950000 950000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0008>; + opp-suspend; }; opp@204000000,1050 { opp-microvolt = <1050000 1050000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0010>; + opp-suspend; }; opp@204000000,1110 { opp-microvolt = <1110000 1110000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0004>; + opp-suspend; }; opp@264000000,800 { @@ -360,6 +364,7 @@ opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x001F>; opp-peak-kBps = <3264000>; + opp-suspend; }; opp@264000000 { diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index d3b99535d755..2298fc034183 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -448,8 +448,10 @@ reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>; - avdd-supply = <&vdd_3v3_sys>; + vdda-supply = <&vdd_3v3_sys>; vdd-supply = <&vdd_3v3_sys>; + + atmel,wakeup-method = <1>; }; gyroscope@68 { @@ -575,7 +577,7 @@ vdd_core: sm0 { regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <950000>; regulator-max-microvolt = <1300000>; regulator-coupled-with = <&rtc_vdd &vdd_cpu>; regulator-coupled-max-spread = <170000 550000>; @@ -616,7 +618,7 @@ rtc_vdd: ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <950000>; regulator-max-microvolt = <1300000>; regulator-coupled-with = <&vdd_core &vdd_cpu>; regulator-coupled-max-spread = <170000 550000>; @@ -838,9 +840,10 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -1055,7 +1058,7 @@ trip0: cpu-alert0 { /* start throttling at 50C */ temperature = <50000>; - hysteresis = <3000>; + hysteresis = <200>; type = "passive"; }; @@ -1070,7 +1073,8 @@ cooling-maps { map0 { trip = <&trip0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi index 702a635e88e7..135de316383b 100644 --- a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi +++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi @@ -9,12 +9,14 @@ clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0003>; opp-hz = /bits/ 64 <216000000>; + opp-suspend; }; opp@216000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0004>; opp-hz = /bits/ 64 <216000000>; + opp-suspend; }; opp@312000000,750 { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 7e49112cd9a1..940a9f31cd86 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -387,10 +387,10 @@ core_vdd_reg: sm0 { regulator-name = "+1.2vs_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; - regulator-coupled-max-spread = <170000 450000>; + regulator-coupled-max-spread = <170000 550000>; regulator-always-on; nvidia,tegra-core-regulator; @@ -401,7 +401,7 @@ regulator-min-microvolt = <750000>; regulator-max-microvolt = <1100000>; regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; - regulator-coupled-max-spread = <450000 450000>; + regulator-coupled-max-spread = <550000 550000>; regulator-always-on; nvidia,tegra-cpu-regulator; @@ -425,10 +425,10 @@ rtc_vdd_reg: ldo2 { regulator-name = "+1.2vs_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; - regulator-coupled-max-spread = <170000 450000>; + regulator-coupled-max-spread = <170000 550000>; regulator-always-on; nvidia,tegra-rtc-regulator; diff --git a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi index b84afecea154..ef3ad2e5f270 100644 --- a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi @@ -68,6 +68,7 @@ opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <216000000>; opp-supported-hw = <0x000F>; + opp-suspend; }; opp@300000000 { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 055334ae3d28..99a356c1ccec 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -2,8 +2,10 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> #include "tegra20.dtsi" #include "tegra20-cpu-opp.dtsi" +#include "tegra20-cpu-opp-microvolt.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -420,18 +422,28 @@ regulator-always-on; }; - sm0 { + vdd_core: sm0 { regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; regulator-always-on; + regulator-boot-on; + + nvidia,tegra-core-regulator; }; - sm1 { + vdd_cpu: sm1 { regulator-name = "vdd_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vdd_core &rtc_vdd>; + regulator-coupled-max-spread = <550000 550000>; regulator-always-on; + regulator-boot-on; + + nvidia,tegra-cpu-regulator; }; sm2_reg: sm2 { @@ -450,10 +462,16 @@ regulator-always-on; }; - ldo2 { + rtc_vdd: ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&vdd_core &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-rtc-regulator; }; ldo3 { @@ -511,9 +529,10 @@ }; }; - temperature-sensor@4c { + nct1008: temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; + #thermal-sensor-cells = <1>; }; }; @@ -595,11 +614,15 @@ cpus { cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { + cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -697,4 +720,37 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct1008 1>; + + trips { + trip0: cpu-alert0 { + /* start throttling at 50C */ + temperature = <50000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: cpu-crit { + /* shut down at 60C */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 6544ce70b46f..b2ac51fb15b1 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -860,6 +860,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index ac1c1a63eb0e..dc773b1bf8ee 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -1056,19 +1056,22 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -1281,7 +1284,10 @@ cooling-maps { map0 { trip = <&trip0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi index bfc06b988781..b97da45ebdb4 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi @@ -12,6 +12,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index e0624b74fb50..e159feeedef7 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1776,6 +1776,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index c1c0ca628af1..a11028b8b67b 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -2,8 +2,6 @@ /dts-v1/; #include "tegra30-cardhu.dtsi" -#include "tegra30-cpu-opp.dtsi" -#include "tegra30-cpu-opp-microvolt.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -92,50 +90,4 @@ enable-active-high; gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; - - i2c@7000d000 { - pmic: tps65911@2d { - regulators { - vddctrl_reg: vddctrl { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1125000>; - regulator-coupled-with = <&vddcore_reg>; - regulator-coupled-max-spread = <300000>; - regulator-max-step-microvolt = <100000>; - - nvidia,tegra-cpu-regulator; - }; - }; - }; - - vddcore_reg: tps62361@60 { - regulator-coupled-with = <&vddctrl_reg>; - regulator-coupled-max-spread = <300000>; - regulator-max-step-microvolt = <100000>; - - nvidia,tegra-core-regulator; - }; - }; - - cpus { - cpu0: cpu@0 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@2 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@3 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index dab9989fa760..2dff14b87f3e 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> #include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" /** * This file contains common DT entry for all fab version of Cardhu. @@ -240,6 +243,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; @@ -272,9 +276,14 @@ vddctrl_reg: vddctrl { regulator-name = "vdd_cpu,vdd_sys"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; }; vio_reg: vio { @@ -334,25 +343,31 @@ }; }; - temperature-sensor@4c { + nct1008: temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; vcc-supply = <&sys_3v3_reg>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; }; - tps62361@60 { + vdd_core: tps62361@60 { compatible = "ti,tps62361"; reg = <0x60>; regulator-name = "tps62361-vout"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1500000>; + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-boot-on; regulator-always-on; ti,vsel0-state-high; ti,vsel1-state-high; + + nvidia,tegra-core-regulator; }; }; @@ -424,6 +439,32 @@ #clock-cells = <0>; }; + cpus { + cpu0: cpu@0 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + }; + panel: panel { compatible = "chunghwa,claa101wb01"; ddc-i2c-bus = <&panelddc>; @@ -603,6 +644,41 @@ <&tegra_car TEGRA30_CLK_EXTERN1>; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct1008 1>; + + trips { + trip0: cpu-alert0 { + /* throttle at 57C until temperature drops to 56.8C */ + temperature = <57000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: cpu-crit { + /* shut down at 60C */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index e36aa3ce6c3d..413e35215804 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -737,6 +737,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi index 0f7135006d19..72f2fe26cc0e 100644 --- a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi @@ -45,18 +45,21 @@ clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x31FE>; opp-hz = /bits/ 64 <204000000>; + opp-suspend; }; opp@204000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0C01>; opp-hz = /bits/ 64 <204000000>; + opp-suspend; }; opp@204000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <204000000>; + opp-suspend; }; opp@312000000,850 { diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 0368b3b816ef..9a10e0d69762 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -139,6 +139,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,en-gpio-sleep = <0 1 1 1 1 1 0 0 1>; ti,system-power-controller; @@ -391,19 +392,23 @@ cpu-supply = <&vdd_cpu>; #cooling-cells = <2>; }; - cpu@1 { + + cpu1: cpu@1 { operating-points-v2 = <&cpu0_opp_table>; cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { operating-points-v2 = <&cpu0_opp_table>; cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { operating-points-v2 = <&cpu0_opp_table>; cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; }; }; @@ -455,7 +460,10 @@ }; map1 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi index cbe84d25e726..2c9780319725 100644 --- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -128,12 +128,14 @@ opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0007>; + opp-suspend; }; opp@204000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0008>; + opp-suspend; }; opp@333500000,1000 { @@ -312,6 +314,7 @@ opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x000F>; opp-peak-kBps = <1632000>; + opp-suspend; }; opp@333500000 { diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig index 576d1ab293c8..cd300eeedc20 100644 --- a/arch/arm/mach-mstar/Kconfig +++ b/arch/arm/mach-mstar/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_MSTARV7 select ARM_GIC select ARM_HEAVY_MB select MST_IRQ + select MSTAR_MSC313_MPLL help Support for newer MStar/Sigmastar SoC families that are based on Armv7 cores like the Cortex A7 and share the same diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 2e3a10914c40..9f304525b193 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -569,10 +569,29 @@ static void pdata_quirks_check(struct pdata_init *quirks) } } -void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) +static const char * const pdata_quirks_init_nodes[] = { + "prcm", + "prm", +}; + +void __init +pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table) { struct device_node *np; + int i; + + for (i = 0; i < ARRAY_SIZE(pdata_quirks_init_nodes); i++) { + np = of_find_node_by_name(NULL, pdata_quirks_init_nodes[i]); + if (!np) + continue; + of_platform_populate(np, omap_dt_match_table, + omap_auxdata_lookup, NULL); + } +} + +void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) +{ /* * We still need this for omap2420 and omap3 PM to work, others are * using drivers/misc/sram.c already. @@ -585,13 +604,7 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) omap3_mcbsp_init(); pdata_quirks_check(auxdata_quirks); - /* Populate always-on PRCM in l4_wkup to probe l4_wkup */ - np = of_find_node_by_name(NULL, "prcm"); - if (!np) - np = of_find_node_by_name(NULL, "prm"); - if (np) - of_platform_populate(np, omap_dt_match_table, - omap_auxdata_lookup, NULL); + pdata_quirks_init_clocks(omap_dt_match_table); of_platform_populate(NULL, omap_dt_match_table, omap_auxdata_lookup, NULL); diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 62df666c2bd0..17b66f0d0dee 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -88,34 +88,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, extern struct omap_sr_data omap_sr_pdata[]; -static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +static int __init sr_init_by_name(const char *name, const char *voltdm) { struct omap_sr_data *sr_data = NULL; struct omap_volt_data *volt_data; - struct omap_smartreflex_dev_attr *sr_dev_attr; static int i; - if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) || - !strncmp(oh->name, "smartreflex_mpu", 16)) + if (!strncmp(name, "smartreflex_mpu_iva", 20) || + !strncmp(name, "smartreflex_mpu", 16)) sr_data = &omap_sr_pdata[OMAP_SR_MPU]; - else if (!strncmp(oh->name, "smartreflex_core", 17)) + else if (!strncmp(name, "smartreflex_core", 17)) sr_data = &omap_sr_pdata[OMAP_SR_CORE]; - else if (!strncmp(oh->name, "smartreflex_iva", 16)) + else if (!strncmp(name, "smartreflex_iva", 16)) sr_data = &omap_sr_pdata[OMAP_SR_IVA]; if (!sr_data) { - pr_err("%s: Unknown instance %s\n", __func__, oh->name); + pr_err("%s: Unknown instance %s\n", __func__, name); return -EINVAL; } - sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; - if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { - pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", - __func__, oh->name); - goto exit; - } - - sr_data->name = oh->name; + sr_data->name = name; if (cpu_is_omap343x()) sr_data->ip_type = 1; else @@ -136,10 +128,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) } } - sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); + sr_data->voltdm = voltdm_lookup(voltdm); if (!sr_data->voltdm) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", - __func__, sr_dev_attr->sensor_voltdm_name); + __func__, voltdm); goto exit; } @@ -160,6 +152,20 @@ exit: return 0; } +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + struct omap_smartreflex_dev_attr *sr_dev_attr; + + sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; + if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { + pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", + __func__, oh->name); + return 0; + } + + return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name); +} + /* * API to be called from board files to enable smartreflex * autocompensation at init. @@ -169,7 +175,42 @@ void __init omap_enable_smartreflex_on_init(void) sr_enable_on_init = true; } +static const char * const omap4_sr_instances[] = { + "mpu", + "iva", + "core", +}; + +static const char * const dra7_sr_instances[] = { + "mpu", + "core", +}; + int __init omap_devinit_smartreflex(void) { + const char * const *sr_inst; + int i, nr_sr = 0; + + if (soc_is_omap44xx()) { + sr_inst = omap4_sr_instances; + nr_sr = ARRAY_SIZE(omap4_sr_instances); + + } else if (soc_is_dra7xx()) { + sr_inst = dra7_sr_instances; + nr_sr = ARRAY_SIZE(dra7_sr_instances); + } + + if (nr_sr) { + const char *name, *voltdm; + + for (i = 0; i < nr_sr; i++) { + name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]); + voltdm = sr_inst[i]; + sr_init_by_name(name, voltdm); + } + + return 0; + } + return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL); } diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index 011d57b488c2..a766310d8dca 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -17,6 +17,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32f746", "st,stm32f769", "st,stm32h743", + "st,stm32h750", "st,stm32mp157", NULL }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index f6c55877fbd9..1cc7fdcec51b 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -544,6 +544,10 @@ ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>, <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + /* Standard AXI Translation entries as programmed by EDK2 */ + dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>, + <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>, + <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, @@ -640,7 +644,6 @@ #iommu-cells = <1>; #global-interrupts = <1>; dma-coherent; - status = "disabled"; }; smmu_hdlcd1: iommu@7fb10000 { diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 5f290090b0cf..0e24e29eb9b1 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -230,6 +230,10 @@ status = "okay"; }; +&smmu_pcie { + status = "okay"; +}; + &etm0 { cpu = <&A57_0>; }; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 305300dd521c..e609420ce3e4 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -236,6 +236,10 @@ status = "okay"; }; +&smmu_pcie { + status = "okay"; +}; + &etm0 { cpu = <&A72_0>; }; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile index ebebc0cd421f..cc75854519ac 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb +dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts index ee3ed612274c..2dd028438c22 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -18,11 +18,106 @@ leds { compatible = "gpio-leds"; - wps { + led-power-white { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led-power-amber { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + led-wps { function = LED_FUNCTION_WPS; color = <LED_COLOR_ID_WHITE>; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; + + led-2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-1 { + function = "5ghz-1"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-2 { + function = "5ghz-2"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + function = "usb2"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + function = "usb3"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + led-wifi { + function = "wifi"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&enet { + nvmem-cells = <&base_mac_addr>; + nvmem-cell-names = "mac-address"; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; }; }; @@ -40,11 +135,21 @@ #size-cells = <1>; partition@0 { + compatible = "nvmem-cells"; label = "cferom"; reg = <0x0 0x100000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x100000>; + + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; }; partition@100000 { + compatible = "brcm,bcm4908-firmware"; label = "firmware"; reg = <0x100000 0x4400000>; }; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts new file mode 100644 index 000000000000..b63eefab48bd --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4906.dtsi" + +/ { + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + function = "5ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + led-wan-amber { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan-blue { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + led-lan { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + led-wps { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + function = "usb2"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + function = "usbd3"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-brightness { + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + brightness { + label = "LEDs"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x3900000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x3a00000 0x3900000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 6e4ad66ff536..169fbb7cfd34 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -44,6 +44,28 @@ }; }; +&enet { + nvmem-cells = <&base_mac_addr>; + nvmem-cell-names = "mac-address"; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + &ports { port@0 { label = "lan2"; @@ -65,6 +87,7 @@ port@7 { label = "sw"; reg = <7>; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -105,13 +128,32 @@ #size-cells = <0>; partitions { - compatible = "fixed-partitions"; + compatible = "brcm,bcm4908-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { + compatible = "nvmem-cells"; label = "cferom"; reg = <0x0 0x100000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x100000>; + + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x5700000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x5800000 0x5700000>; }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index 9354077f74cd..8060178b365d 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -2,6 +2,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/soc/bcm-pmb.h> /dts-v1/; @@ -110,28 +112,52 @@ #size-cells = <1>; ranges = <0x00 0x00 0x80000000 0x281000>; - usb@c300 { + enet: ethernet@2000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x2000 0x1000>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + }; + + usb_phy: usb-phy@c200 { + compatible = "brcm,bcm4908-usb-phy"; + reg = <0xc200 0x100>; + reg-names = "ctrl"; + power-domains = <&pmb BCM_PMB_HOST_USB>; + dr_mode = "host"; + brcm,has-xhci; + brcm,has-eohci; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: usb@c300 { compatible = "generic-ehci"; reg = <0xc300 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; }; - usb@c400 { + ohci: usb@c400 { compatible = "generic-ohci"; reg = <0xc400 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; }; - usb@d000 { + xhci: usb@d000 { compatible = "generic-xhci"; reg = <0xd000 0x8c8>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB3>; status = "disabled"; }; - ethernet-switch@80000 { + bus@80000 { compatible = "simple-bus"; #size-cells = <1>; #address-cells = <1>; @@ -182,6 +208,17 @@ phy-mode = "internal"; phy-handle = <&phy11>; }; + + port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; @@ -222,7 +259,7 @@ #address-cells = <1>; #size-cells = <1>; - power-controller@2800c0 { + pmb: power-controller@2800c0 { compatible = "brcm,bcm4908-pmb"; reg = <0x2800c0 0x40>; #power-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6438db3822f8..44890d56c194 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb @@ -47,6 +49,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb @@ -57,6 +60,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 0516076087ae..a92ecb331cdc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -25,6 +25,8 @@ spi1 = &dspi2; mmc0 = &esdhc1; mmc1 = &esdhc; + rtc0 = &rtc; + rtc1 = &ftm_alarm0; }; buttons0 { @@ -115,8 +117,6 @@ status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; m25p,fast-read; spi-max-frequency = <133000000>; @@ -125,49 +125,37 @@ spi-rx-bus-width = <2>; /* 2 SPI Rx lines */ spi-tx-bus-width = <1>; /* 1 SPI Tx line */ - partition@0 { - reg = <0x000000 0x010000>; - label = "rcw"; - read-only; - }; - - partition@10000 { - reg = <0x010000 0x0f0000>; - label = "failsafe bootloader"; - read-only; - }; - - partition@100000 { - reg = <0x100000 0x040000>; - label = "failsafe DP firmware"; - read-only; - }; - - partition@140000 { - reg = <0x140000 0x0a0000>; - label = "failsafe trusted firmware"; - read-only; - }; - - partition@1e0000 { - reg = <0x1e0000 0x020000>; - label = "reserved"; - read-only; - }; - - partition@200000 { - reg = <0x200000 0x010000>; - label = "configuration store"; - }; - - partition@210000 { - reg = <0x210000 0x1d0000>; - label = "bootloader"; - }; - - partition@3e0000 { - reg = <0x3e0000 0x020000>; - label = "bootloader environment"; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x010000>; + label = "rcw"; + read-only; + }; + + partition@10000 { + reg = <0x010000 0x1d0000>; + label = "failsafe bootloader"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x010000>; + label = "configuration store"; + }; + + partition@210000 { + reg = <0x210000 0x1d0000>; + label = "bootloader"; + }; + + partition@3e0000 { + reg = <0x3e0000 0x020000>; + label = "bootloader environment"; + }; }; }; }; @@ -191,7 +179,7 @@ &i2c0 { status = "okay"; - rtc@32 { + rtc: rtc@32 { compatible = "microcrystal,rv8803"; reg = <0x32>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index fbcba9cb8503..bfd14b64567e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -25,6 +25,7 @@ serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; + rtc1 = &ftm_alarm0; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 41ae6e7675ba..9322c6ad8e4a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -21,6 +21,7 @@ serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; + rtc1 = &ftm_alarm0; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 262fbad8f0ec..9506f0669ead 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -18,10 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - rtc1 = &ftm_alarm0; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -1027,7 +1023,7 @@ status = "disabled"; fixed-link { - speed = <1000>; + speed = <2500>; full-duplex; }; }; @@ -1114,6 +1110,12 @@ full-duplex; }; }; + + rcec@1f,0 { + reg = <0x00f800 0 0 0 0>; + /* IEP INT_A */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; }; rcpm: power-controller@1e34040 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index 459dccad8326..afb455210bd0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -122,6 +122,30 @@ vcc-supply = <&sb_3v3>; }; }; + + sfp0_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sfp1_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + sfp2_i2c: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + sfp3_i2c: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi index 2b63235ca627..17f8e733972a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -30,6 +30,54 @@ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; }; }; + + sfp0: sfp-0 { + compatible = "sff,sfp"; + i2c-bus = <&sfp0_i2c>; + mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp3: sfp-3 { + compatible = "sff,sfp"; + i2c-bus = <&sfp3_i2c>; + mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; +}; + +&dpmac7 { + sfp = <&sfp0>; + managed = "in-band-status"; +}; + +&dpmac8 { + sfp = <&sfp1>; + managed = "in-band-status"; +}; + +&dpmac9 { + sfp = <&sfp2>; + managed = "in-band-status"; +}; + +&dpmac10 { + sfp = <&sfp3>; + managed = "in-band-status"; }; &emdio2 { @@ -44,6 +92,22 @@ status = "okay"; }; +&pcs_mdio7 { + status = "okay"; +}; + +&pcs_mdio8 { + status = "okay"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; + &sata0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi new file mode 100644 index 000000000000..9386d1a59e82 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <[email protected]> + */ + +#include "imx8-ss-audio.dtsi" +#include "imx8-ss-dma.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi new file mode 100644 index 000000000000..6c8d75ef9250 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <[email protected]> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +audio_subsys: bus@59000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x59000000 0x0 0x59000000 0x1000000>; + + audio_ipg_clk: clock-audio-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "audio_ipg_clk"; + }; + + dsp_lpcg: clock-controller@59580000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59580000 0x10000>; + #clock-cells = <1>; + clocks = <&audio_ipg_clk>, + <&audio_ipg_clk>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_7>; + clock-output-names = "dsp_lpcg_adb_clk", + "dsp_lpcg_ipg_clk", + "dsp_lpcg_core_clk"; + power-domains = <&pd IMX_SC_R_DSP>; + }; + + dsp_ram_lpcg: clock-controller@59590000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59590000 0x10000>; + #clock-cells = <1>; + clocks = <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "dsp_ram_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_DSP_RAM>; + }; + + dsp: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0x596e8000 0x88000>; + clocks = <&dsp_lpcg IMX_LPCG_CLK_5>, + <&dsp_ram_lpcg IMX_LPCG_CLK_4>, + <&dsp_lpcg IMX_LPCG_CLK_7>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd IMX_SC_R_MU_13A>, + <&pd IMX_SC_R_MU_13B>, + <&pd IMX_SC_R_DSP>, + <&pd IMX_SC_R_DSP_RAM>; + mbox-names = "txdb0", "txdb1", + "rxdb0", "rxdb1"; + mboxes = <&lsio_mu13 2 0>, + <&lsio_mu13 2 1>, + <&lsio_mu13 3 0>, + <&lsio_mu13 3 1>; + memory-region = <&dsp_reserved>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi new file mode 100644 index 000000000000..e1e81ca0ca69 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <[email protected]> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +conn_subsys: bus@5b000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; + + conn_axi_clk: clock-conn-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333333333>; + clock-output-names = "conn_axi_clk"; + }; + + conn_ahb_clk: clock-conn-ahb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166666666>; + clock-output-names = "conn_ahb_clk"; + }; + + conn_ipg_clk: clock-conn-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <83333333>; + clock-output-names = "conn_ipg_clk"; + }; + + usdhc1: mmc@5b010000 { + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, + <&sdhc0_lpcg IMX_LPCG_CLK_5>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + status = "disabled"; + }; + + usdhc2: mmc@5b020000 { + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b020000 0x10000>; + clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, + <&sdhc1_lpcg IMX_LPCG_CLK_5>, + <&sdhc1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@5b030000 { + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b030000 0x10000>; + clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, + <&sdhc2_lpcg IMX_LPCG_CLK_5>, + <&sdhc2_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + status = "disabled"; + }; + + fec1: ethernet@5b040000 { + reg = <0x5b040000 0x10000>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, + <&enet0_lpcg IMX_LPCG_CLK_2>, + <&enet0_lpcg IMX_LPCG_CLK_1>, + <&enet0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_0>; + status = "disabled"; + }; + + fec2: ethernet@5b050000 { + reg = <0x5b050000 0x10000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, + <&enet1_lpcg IMX_LPCG_CLK_2>, + <&enet1_lpcg IMX_LPCG_CLK_1>, + <&enet1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_1>; + status = "disabled"; + }; + + /* LPCG clocks */ + sdhc0_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b200000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; + + sdhc1_lpcg: clock-controller@5b210000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b210000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc1_lpcg_per_clk", + "sdhc1_lpcg_ipg_clk", + "sdhc1_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + }; + + sdhc2_lpcg: clock-controller@5b220000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b220000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc2_lpcg_per_clk", + "sdhc2_lpcg_ipg_clk", + "sdhc2_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + }; + + enet0_lpcg: clock-controller@5b230000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b230000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet0_ipg_root_clk", + "enet0_tx_clk", + "enet0_ahb_clk", + "enet0_ipg_clk", + "enet0_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_0>; + }; + + enet1_lpcg: clock-controller@5b240000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet1_ipg_root_clk", + "enet1_tx_clk", + "enet1_ahb_clk", + "enet1_ipg_clk", + "enet1_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi new file mode 100644 index 000000000000..8b5cad4e2700 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <[email protected]> + */ + +ddr_subsys: bus@5c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi new file mode 100644 index 000000000000..960a802b8b6e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <[email protected]> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +dma_subsys: bus@5a000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5a000000 0x0 0x5a000000 0x1000000>; + + dma_ipg_clk: clock-dma-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "dma_ipg_clk"; + }; + + lpuart0: serial@5a060000 { + reg = <0x5a060000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, + <&uart0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_0>; + status = "disabled"; + }; + + lpuart1: serial@5a070000 { + reg = <0x5a070000 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, + <&uart1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_1>; + status = "disabled"; + }; + + lpuart2: serial@5a080000 { + reg = <0x5a080000 0x1000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, + <&uart2_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_2>; + status = "disabled"; + }; + + lpuart3: serial@5a090000 { + reg = <0x5a090000 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, + <&uart3_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_3>; + status = "disabled"; + }; + + uart0_lpcg: clock-controller@5a460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a460000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart0_lpcg_baud_clk", + "uart0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_0>; + }; + + uart1_lpcg: clock-controller@5a470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a470000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart1_lpcg_baud_clk", + "uart1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_1>; + }; + + uart2_lpcg: clock-controller@5a480000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a480000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart2_lpcg_baud_clk", + "uart2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_2>; + }; + + uart3_lpcg: clock-controller@5a490000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a490000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart3_lpcg_baud_clk", + "uart3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_3>; + }; + + i2c0: i2c@5a800000 { + reg = <0x5a800000 0x4000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_0>; + status = "disabled"; + }; + + i2c1: i2c@5a810000 { + reg = <0x5a810000 0x4000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_1>; + status = "disabled"; + }; + + i2c2: i2c@5a820000 { + reg = <0x5a820000 0x4000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_2>; + status = "disabled"; + }; + + i2c3: i2c@5a830000 { + reg = <0x5a830000 0x4000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_3>; + status = "disabled"; + }; + + i2c0_lpcg: clock-controller@5ac00000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac00000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c0_lpcg_clk", + "i2c0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_0>; + }; + + i2c1_lpcg: clock-controller@5ac10000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac10000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c1_lpcg_clk", + "i2c1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_1>; + }; + + i2c2_lpcg: clock-controller@5ac20000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac20000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c2_lpcg_clk", + "i2c2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_2>; + }; + + i2c3_lpcg: clock-controller@5ac30000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac30000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c3_lpcg_clk", + "i2c3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_3>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi new file mode 100644 index 000000000000..ee4e585a9c39 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <[email protected]> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; + + lsio_mem_clk: clock-lsio-mem { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "lsio_mem_clk"; + }; + + lsio_bus_clk: clock-lsio-bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "lsio_bus_clk"; + }; + + lsio_gpio0: gpio@5d080000 { + reg = <0x5d080000 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_0>; + }; + + lsio_gpio1: gpio@5d090000 { + reg = <0x5d090000 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_1>; + }; + + lsio_gpio2: gpio@5d0a0000 { + reg = <0x5d0a0000 0x10000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_2>; + }; + + lsio_gpio3: gpio@5d0b0000 { + reg = <0x5d0b0000 0x10000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_3>; + }; + + lsio_gpio4: gpio@5d0c0000 { + reg = <0x5d0c0000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_4>; + }; + + lsio_gpio5: gpio@5d0d0000 { + reg = <0x5d0d0000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_5>; + }; + + lsio_gpio6: gpio@5d0e0000 { + reg = <0x5d0e0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_6>; + }; + + lsio_gpio7: gpio@5d0f0000 { + reg = <0x5d0f0000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_7>; + }; + + lsio_mu0: mailbox@5d1b0000 { + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + reg = <0x5d1c0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + lsio_mu2: mailbox@5d1d0000 { + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu3: mailbox@5d1e0000 { + reg = <0x5d1e0000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + reg = <0x5d1f0000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu13: mailbox@5d280000 { + reg = <0x5d280000 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_13A>; + }; + + /* LPCG clocks */ + pwm0_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d400000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm0_lpcg_ipg_clk", + "pwm0_lpcg_ipg_hf_clk", + "pwm0_lpcg_ipg_s_clk", + "pwm0_lpcg_ipg_slv_clk", + "pwm0_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_0>; + }; + + pwm1_lpcg: clock-controller@5d410000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d410000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm1_lpcg_ipg_clk", + "pwm1_lpcg_ipg_hf_clk", + "pwm1_lpcg_ipg_s_clk", + "pwm1_lpcg_ipg_slv_clk", + "pwm1_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_1>; + }; + + pwm2_lpcg: clock-controller@5d420000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d420000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm2_lpcg_ipg_clk", + "pwm2_lpcg_ipg_hf_clk", + "pwm2_lpcg_ipg_s_clk", + "pwm2_lpcg_ipg_slv_clk", + "pwm2_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_2>; + }; + + pwm3_lpcg: clock-controller@5d430000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d430000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm3_lpcg_ipg_clk", + "pwm3_lpcg_ipg_hf_clk", + "pwm3_lpcg_ipg_s_clk", + "pwm3_lpcg_ipg_slv_clk", + "pwm3_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_3>; + }; + + pwm4_lpcg: clock-controller@5d440000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d440000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm4_lpcg_ipg_clk", + "pwm4_lpcg_ipg_hf_clk", + "pwm4_lpcg_ipg_s_clk", + "pwm4_lpcg_ipg_slv_clk", + "pwm4_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_4>; + }; + + pwm5_lpcg: clock-controller@5d450000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d450000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm5_lpcg_ipg_clk", + "pwm5_lpcg_ipg_hf_clk", + "pwm5_lpcg_ipg_s_clk", + "pwm5_lpcg_ipg_slv_clk", + "pwm5_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_5>; + }; + + pwm6_lpcg: clock-controller@5d460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d460000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm6_lpcg_ipg_clk", + "pwm6_lpcg_ipg_hf_clk", + "pwm6_lpcg_ipg_s_clk", + "pwm6_lpcg_ipg_slv_clk", + "pwm6_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_6>; + }; + + pwm7_lpcg: clock-controller@5d470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d470000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm7_lpcg_ipg_clk", + "pwm7_lpcg_ipg_hf_clk", + "pwm7_lpcg_ipg_s_clk", + "pwm7_lpcg_ipg_slv_clk", + "pwm7_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_7>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts new file mode 100644 index 000000000000..5389d6f2beba --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "imx8mm.dtsi" +#include "imx8mm-icore-mx8mm.dtsi" + +/ { + model = "Engicam i.Core MX8M Mini C.TOUCH 2.0"; + compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm", + "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; + bus-width = <4>; + no-1-8-v; + pm-ignore-notify; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts new file mode 100644 index 000000000000..a4a2ada14835 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "imx8mm.dtsi" +#include "imx8mm-icore-mx8mm.dtsi" + +/ { + model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm", + "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; + bus-width = <4>; + no-1-8-v; + pm-ignore-notify; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi new file mode 100644 index 000000000000..b40148d728ea --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,icore-mx8mm", "fsl,imx8mm"; +}; + +&A53_0 { + cpu-supply = <®_buck4>; +}; + +&A53_1 { + cpu-supply = <®_buck4>; +}; + +&A53_2 { + cpu-supply = <®_buck4>; +}; + +&A53_3 { + cpu-supply = <®_buck4>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x08>; + + regulators { + reg_ldo1: ldo1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo2: ldo2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo3: ldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo4: ldo4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck1: buck1 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck2: buck2 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck3: buck3 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck4: buck4 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck5: buck5 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck6: buck6 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck7: buck7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index c0c384d76147..74c09891600f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -9,6 +9,53 @@ / { model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2"; compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm"; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_vmmc: regulator-wlan-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound-wm8960 { + audio-cpu = <&sai1>; + audio-codec = <&wm8960>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "RINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + compatible = "fsl,imx-audio-wm8960"; + /* JD2: hp detect high for headphone*/ + hp-det-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + /* Jack is not stuffed */ + mic-det-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + model = "wm8960-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound_wm8960>; + }; }; &A53_0 { @@ -27,6 +74,17 @@ cpu-supply = <®_buck3>; }; +/* J15 */ +&ecspi2 { + assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -47,6 +105,12 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -156,7 +220,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c3 { + i2c3@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -173,12 +237,88 @@ }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clk IMX8MM_CLK_SAI1_ROOT>; + clock-names = "mclk1"; + wlf,shared-lrclk; + #sound-dai-cells = <0>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + assigned-clocks = <&clk IMX8MM_CLK_PWM2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +/* BT */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + /* console */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - assigned-clocks = <&clk IMX8MM_CLK_UART2>; - assigned-clock-parents = <&clk IMX8MM_CLK_24M>; + status = "okay"; +}; + +/* J15 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +/* J9 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; status = "okay"; }; @@ -191,6 +331,8 @@ pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vref_3v3>; + vqmmc-supply = <®_vref_1v8>; status = "okay"; }; @@ -206,6 +348,48 @@ status = "okay"; }; +/* wlan */ +&usdhc3 { + bus-width = <4>; + sdhci-caps-mask = <0x2 0x0>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <®_wlan_vmmc>; + vqmmc-supply = <®_vref_1v8>; + status = "okay"; +}; + +/* USB OTG port */ +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + power-active-high; + status = "okay"; +}; + +/* USB Host port */ +&usbotg2 { + dr_mode = "host"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + power-active-high; + /* + * FIXME: having USB2 enabled hangs the boot just after: + *[ 1.655941] ci_hdrc ci_hdrc.1: EHCI Host Controller + *[ 1.660880] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 + *[ 1.681505] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 + *[ 1.687730] hub 2-0:1.0: USB hub found + *[ 1.691528] hub 2-0:1.0: 1 port detected + */ + status = "disabled"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -217,6 +401,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -237,6 +430,17 @@ >; }; + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09 @@ -258,12 +462,86 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + pinctrl_i2c3a_rv4162: i2c3a-rv4162grp { fsl,pins = < MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0 >; }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x16 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x16 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x16 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x16 + >; + }; + + pinctrl_reg_wlan_vmmc: reg-wlan-vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + /* wm8960 */ + MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0xd6 + MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0xd6 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + /* Bluetooth PCM */ + MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + + pinctrl_sound_wm8960: sound-wm8960grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x80 + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x80 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 @@ -271,6 +549,36 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140 + MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x16 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x156 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x16 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x15 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 6bf1d15ba16a..a27e02bee6b4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -887,7 +887,7 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, <&clk IMX8MM_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index de2cd0e3201c..c35eeaff958f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -262,8 +262,12 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; bus-width = <4>; non-removable; cap-power-off-card; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 16ea50089567..4dac4da38f4c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -898,7 +898,7 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_QSPI_ROOT>, <&clk IMX8MN_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 7db4273cc88b..2c28e589677e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -98,6 +98,8 @@ reg = <1>; eee-broken-1000t; reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 0e1a6d953389..e5d5e6067145 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -16,7 +16,7 @@ "phytec,imx8mp-phycore-som", "fsl,imx8mp"; chosen { - stdout-path = &uart2; + stdout-path = &uart1; }; reg_usdhc2_vmmc: regulator-usdhc2 { @@ -33,6 +33,30 @@ }; }; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + }; + }; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -71,9 +95,9 @@ }; /* debug console */ -&uart2 { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; @@ -90,6 +114,26 @@ }; &iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 @@ -110,10 +154,10 @@ >; }; - pinctrl_uart2: uart2grp { + pinctrl_uart1: uart1grp { fsl,pins = < - MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 - MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index c7523fd4eae9..6dc6f388c7f9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -18,6 +18,7 @@ aliases { ethernet0 = &fec; + ethernet1 = &eqos; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -312,6 +313,22 @@ status = "disabled"; }; + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mp-iomuxc"; reg = <0x30330000 0x10000>; @@ -786,6 +803,28 @@ nvmem_macaddr_swap; status = "disabled"; }; + + eqos: ethernet@30bf0000 { + compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eth_wake_irq", "macirq"; + clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, + <&clk IMX8MP_CLK_QOS_ENET_ROOT>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; + assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <100000000>, <125000000>; + intf_mode = <&gpr 0x4>; + status = "disabled"; + }; }; gic: interrupt-controller@38800000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts new file mode 100644 index 000000000000..f593e4ff62e1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -0,0 +1,613 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for the Kontron pitx-imx8m board. + * + * Copyright (C) 2021 Heiko Thiery <[email protected]> + */ + +/dts-v1/; + +#include "imx8mq.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "Kontron pITX-imx8m"; + compatible = "kontron,pitx-imx8m", "fsl,imx8mq"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &qspi0; + spi1 = &ecspi2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + pcie0_refclk: pcie0-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: pcie1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670"; + reg = <0>; + spi-max-frequency = <43000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <280>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + fsl,pfuze-support-disable-sw; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-name = "V_0V9_GPU"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-name = "V_0V9_VPU"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-name = "V_1V1_NVCC_DRAM"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-name = "V_1V0_DRAM"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-name = "NC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-name = "V_0V9_SNVS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-name = "V_0V55_VREF_DDR"; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-name = "V_1V5_CSI"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-name = "V_0V9_PHY"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-name = "V_1V8_PHY"; + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-name = "V_1V8_VDDA"; + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-name = "V_3V3_PHY"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-name = "V_2V8_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + fan-controller@1b { + compatible = "maxim,max6650"; + reg = <0x1b>; + maxim,fan-microvolt = <5000000>; + }; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + sensor@4b { + compatible = "national,lm75b"; + reg = <0x4b>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* M.2 B-key slot */ +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +/* Intel Ethernet Controller I210/I211 */ +&pcie1 { + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + fsl,max-link-speed = <1>; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + spi-max-frequency = <50000000>; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + maximum-speed = "high-speed"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */ + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */ + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */ + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */ + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */ + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */ + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */ + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */ + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */ + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */ + >; + }; + + pinctrl_reg_usdhc2: regusdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 + >; + }; + + pinctrl_ecspi2_cs: ecspi2csgrp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49 + MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usb0: usb0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x19 + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index dd217a0760e9..622f3787a186 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -50,13 +50,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; - hp-det { - label = "HP_DET"; - gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; - wakeup-source; - linux,code = <KEY_HP>; - }; - wwan-wake { label = "WWAN_WAKE"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; @@ -163,21 +156,35 @@ #sound-dai-cells = <0>; }; + mic_mux: mic-mux { + compatible = "simple-audio-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_micsel>; + mux-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + sound-name-prefix = "Mic Mux"; + }; + sound { compatible = "simple-audio-card"; - simple-audio-card,name = "sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hpdet>; + simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>; + simple-audio-card,name = "Librem 5 Devkit"; simple-audio-card,format = "i2s"; simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack", - "Speaker", "Speaker Ext", - "Line", "Line In Jack"; + "Microphone", "Builtin Microphone", + "Microphone", "Headset Microphone", + "Headphone", "Headphones", + "Speaker", "Builtin Speaker"; simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "Microphone Jack", "Mic Bias", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "Speaker Ext", "LINE_OUT"; + "MIC_IN", "Mic Mux OUT", + "Mic Mux IN1", "Headset Microphone", + "Mic Mux IN2", "Builtin Microphone", + "Mic Mux OUT", "Mic Bias", + "Headphones", "HP_OUT", + "Builtin Speaker", "Speaker Amp OUTR", + "Speaker Amp INR", "LINE_OUT"; + simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; simple-audio-card,cpu { sound-dai = <&sai2>; @@ -207,6 +214,15 @@ }; }; + speaker_amp: speaker-amp { + compatible = "simple-audio-amplifier"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spkamp>; + VCC-supply = <®_3v3_p>; + sound-name-prefix = "Speaker Amp"; + enable-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -315,7 +331,6 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; - regulator-enable-ramp-delay = <200>; rohm,dvs-run-voltage = <900000>; }; @@ -610,7 +625,6 @@ fsl,pins = < MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 - MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ >; }; @@ -621,6 +635,12 @@ >; }; + pinctrl_hpdet: hpdetgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0xC0 /* HP_DET */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f @@ -641,6 +661,18 @@ >; }; + pinctrl_micsel: micselgrp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0xc6 /* MIC_SEL */ + >; + }; + + pinctrl_spkamp: spkamp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3 0x81 /* MUTE */ + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */ diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts index d77fc5df3f06..73bd431cbd6a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts @@ -25,5 +25,5 @@ }; &proximity { - proximity-near-level = <220>; + proximity-near-level = <120>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts index 0d38327043f8..cd3c3edd48fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts @@ -28,6 +28,10 @@ ti,termination-current = <144000>; /* uA */ }; +&buck3_reg { + regulator-always-on; +}; + &proximity { proximity-near-level = <25>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 06a4799b6aeb..460ef0d86540 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -258,6 +258,25 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "protected0"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "protected1"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "rw"; + reg = <0x40000 0x1C0000>; + }; }; }; @@ -267,8 +286,9 @@ pmic-5v-hog { gpio-hog; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + gpios = <1 GPIO_ACTIVE_HIGH>; input; + lane-mapping = "pmic-5v"; }; }; @@ -1051,8 +1071,6 @@ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; assigned-clock-rates = <24576000>; - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; - assigned-clock-rates = <786432000>, <722534400>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts new file mode 100644 index 000000000000..ce9d3f0b98fc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <[email protected]> + */ + +/dts-v1/; + +#include "imx8qm.dtsi" + +/ { + model = "Freescale i.MX8QM MEK"; + compatible = "fsl,imx8qm-mek", "fsl,imx8qm"; + + chosen { + stdout-path = &lpuart0; + }; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + /delete-node/ cpu@101; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020 + IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi new file mode 100644 index 000000000000..42637a45701c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <[email protected]> + */ + +&fec1 { + compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; +}; + +&fec2 { + compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; +}; + +&usdhc1 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi new file mode 100644 index 000000000000..bbe5f5ecfb92 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <[email protected]> + */ + +&dma_subsys { + uart4_lpcg: clock-controller@5a4a0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a4a0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_4 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart4_lpcg_baud_clk", + "uart4_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_4>; + }; +}; + +&lpuart0 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart1 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart2 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart3 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&i2c0 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c1 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c2 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c3 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi new file mode 100644 index 000000000000..30896610c654 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <[email protected]> + */ + +&lsio_gpio0 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_mu0 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu13 { + compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi new file mode 100644 index 000000000000..12cd059b339b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <[email protected]> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pads-imx8qm.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + }; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A72_0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A72_1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A72_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xC0000>, /* GICR */ + <0x0 0x52000000 0 0x2000>, /* GICC */ + <0x0 0x52010000 0 0x1000>, /* GICH */ + <0x0 0x52020000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", + "rx0", + "gip3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 1 0 + &lsio_mu1 3 3>; + + pd: imx8qx-pd { + compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + clk: clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8qm-iomuxc"; + }; + + }; + + /* sorted in register address */ + #include "imx8-ss-dma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8qm-ss-dma.dtsi" +#include "imx8qm-ss-conn.dtsi" +#include "imx8qm-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts index a3f8cf195974..47bb68823b24 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -13,13 +13,13 @@ compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp"; aliases { - serial1 = &adma_lpuart1; - serial2 = &adma_lpuart2; - serial3 = &adma_lpuart3; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; }; chosen { - stdout-path = &adma_lpuart2; + stdout-path = &lpuart2; }; memory@80000000 { @@ -82,7 +82,7 @@ }; /* BT */ -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; uart-has-rtscts; @@ -90,21 +90,21 @@ }; /* LS-UART0 */ -&adma_lpuart1 { +&lpuart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; status = "okay"; }; /* Debug */ -&adma_lpuart2 { +&lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; status = "okay"; }; /* PCI-E UART */ -&adma_lpuart3 { +&lpuart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart3>; status = "okay"; @@ -133,7 +133,7 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -151,7 +151,7 @@ /* SD */ &usdhc2 { - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi index c7336f387605..144fc9e82da7 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -26,7 +26,7 @@ }; }; -&adma_i2c1 { +&i2c1 { status = "okay"; /* M41T0M6 real time clock on carrier board */ @@ -37,17 +37,17 @@ }; /* Colibri UART_B */ -&adma_lpuart0 { +&lpuart0 { status= "okay"; }; /* Colibri UART_C */ -&adma_lpuart2 { +&lpuart2 { status= "okay"; }; /* Colibri UART_A */ -&adma_lpuart3 { +&lpuart3 { status= "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi index f38acff0d25c..89d70e030433 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -10,7 +10,7 @@ compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; chosen { - stdout-path = &adma_lpuart3; + stdout-path = &lpuart3; }; reg_module_3v3: regulator-module-3v3 { @@ -22,7 +22,7 @@ }; /* On-module I2C */ -&adma_i2c0 { +&i2c0 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -49,7 +49,7 @@ }; /* Colibri I2C */ -&adma_i2c1 { +&i2c1 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -58,19 +58,19 @@ }; /* Colibri UART_B */ -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; }; /* Colibri UART_C */ -&adma_lpuart2 { +&lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; }; /* Colibri UART_A */ -&adma_lpuart3 { +&lpuart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 46437d3c7a04..863232a47004 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -12,7 +12,7 @@ compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; chosen { - stdout-path = &adma_lpuart0; + stdout-path = &lpuart0; }; memory@80000000 { @@ -30,11 +30,30 @@ }; }; -&adma_dsp { +&dsp { status = "okay"; }; -&adma_i2c1 { +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c1 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -110,31 +129,12 @@ }; }; -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; status = "okay"; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - }; -}; - &scu_key { status = "okay"; }; @@ -173,7 +173,7 @@ }; &usdhc1 { - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -185,7 +185,7 @@ }; &usdhc2 { - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi new file mode 100644 index 000000000000..dc1daa8dc72f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <[email protected]> + */ + +&lpuart0 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart1 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart2 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart3 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&i2c0 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c1 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c2 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c3 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi new file mode 100644 index 000000000000..f5f58959f65c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <[email protected]> + */ + +&usdhc1 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc3 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&fec1 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; +}; + +&fec2 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi new file mode 100644 index 000000000000..11395479ffc0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <[email protected]> + */ + +&lsio_gpio0 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_mu0 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu13 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index e46faac1fe71..1e6b4995091e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. - * Copyright 2017-2018 NXP + * Copyright 2017-2020 NXP * Dong Aisheng <[email protected]> */ #include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -29,10 +30,10 @@ gpio5 = &lsio_gpio5; gpio6 = &lsio_gpio6; gpio7 = &lsio_gpio7; - i2c0 = &adma_i2c0; - i2c1 = &adma_i2c1; - i2c2 = &adma_i2c2; - i2c3 = &adma_i2c3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; @@ -41,10 +42,10 @@ mu2 = &lsio_mu2; mu3 = &lsio_mu3; mu4 = &lsio_mu4; - serial0 = &adma_lpuart0; - serial1 = &adma_lpuart1; - serial2 = &adma_lpuart2; - serial3 = &adma_lpuart3; + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; }; cpus { @@ -58,7 +59,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -69,7 +70,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -80,7 +81,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -91,7 +92,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -158,9 +159,14 @@ &lsio_mu1 1 0 &lsio_mu1 3 3>; + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + clk: clock-controller { compatible = "fsl,imx8qxp-clk"; - #clock-cells = <1>; + #clock-cells = <2>; clocks = <&xtal32k &xtal24m>; clock-names = "xtal_32KHz", "xtal_24Mhz"; }; @@ -175,11 +181,6 @@ #size-cells = <1>; }; - pd: imx8qx-pd { - compatible = "fsl,imx8qxp-scu-pd"; - #power-domain-cells = <1>; - }; - scu_key: scu-key { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; linux,keycodes = <KEY_POWER>; @@ -223,380 +224,6 @@ clock-output-names = "xtal_24MHz"; }; - adma_subsys: bus@59000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x59000000 0x0 0x59000000 0x2000000>; - - adma_lpcg: clock-controller@59000000 { - compatible = "fsl,imx8qxp-lpcg-adma"; - reg = <0x59000000 0x2000000>; - #clock-cells = <1>; - }; - - adma_dsp: dsp@596e8000 { - compatible = "fsl,imx8qxp-dsp"; - reg = <0x596e8000 0x88000>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>; - clock-names = "ipg", "ocram", "core"; - power-domains = <&pd IMX_SC_R_MU_13A>, - <&pd IMX_SC_R_MU_13B>, - <&pd IMX_SC_R_DSP>, - <&pd IMX_SC_R_DSP_RAM>; - mbox-names = "txdb0", "txdb1", - "rxdb0", "rxdb1"; - mboxes = <&lsio_mu13 2 0>, - <&lsio_mu13 2 1>, - <&lsio_mu13 3 0>, - <&lsio_mu13 3 1>; - memory-region = <&dsp_reserved>; - status = "disabled"; - }; - - adma_lpuart0: serial@5a060000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a060000 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_0>; - status = "disabled"; - }; - - adma_lpuart1: serial@5a070000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a070000 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_1>; - status = "disabled"; - }; - - adma_lpuart2: serial@5a080000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a080000 0x1000>; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_2>; - status = "disabled"; - }; - - adma_lpuart3: serial@5a090000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a090000 0x1000>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_3>; - status = "disabled"; - }; - - adma_i2c0: i2c@5a800000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a800000 0x4000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_0>; - status = "disabled"; - }; - - adma_i2c1: i2c@5a810000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a810000 0x4000>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_1>; - status = "disabled"; - }; - - adma_i2c2: i2c@5a820000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a820000 0x4000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_2>; - status = "disabled"; - }; - - adma_i2c3: i2c@5a830000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a830000 0x4000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_3>; - status = "disabled"; - }; - }; - - conn_subsys: bus@5b000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; - - conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; - }; - - usdhc1: mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_0>; - status = "disabled"; - }; - - usdhc2: mmc@5b020000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b020000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_1>; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - - usdhc3: mmc@5b030000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b030000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_2>; - status = "disabled"; - }; - - fec1: ethernet@5b040000 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; - reg = <0x5b040000 0x10000>; - interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - power-domains = <&pd IMX_SC_R_ENET_0>; - status = "disabled"; - }; - - fec2: ethernet@5b050000 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; - reg = <0x5b050000 0x10000>; - interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - power-domains = <&pd IMX_SC_R_ENET_1>; - status = "disabled"; - }; - }; - - ddr_subsyss: bus@5c000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - - ddr-pmu@5c020000 { - compatible = "fsl,imx8-ddr-pmu"; - reg = <0x5c020000 0x10000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - lsio_subsys: bus@5d000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; - - lsio_gpio0: gpio@5d080000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d080000 0x10000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_0>; - }; - - lsio_gpio1: gpio@5d090000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d090000 0x10000>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_1>; - }; - - lsio_gpio2: gpio@5d0a0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0a0000 0x10000>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_2>; - }; - - lsio_gpio3: gpio@5d0b0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0b0000 0x10000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_3>; - }; - - lsio_gpio4: gpio@5d0c0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0c0000 0x10000>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_4>; - }; - - lsio_gpio5: gpio@5d0d0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0d0000 0x10000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_5>; - }; - - lsio_gpio6: gpio@5d0e0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0e0000 0x10000>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_6>; - }; - - lsio_gpio7: gpio@5d0f0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0f0000 0x10000>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_7>; - }; - - lsio_mu0: mailbox@5d1b0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1b0000 0x10000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu1: mailbox@5d1c0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1c0000 0x10000>; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - }; - - lsio_mu2: mailbox@5d1d0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1d0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu3: mailbox@5d1e0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1e0000 0x10000>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu4: mailbox@5d1f0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1f0000 0x10000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu13: mailbox@5d280000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d280000 0x10000>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - power-domains = <&pd IMX_SC_R_MU_13A>; - }; - - lsio_lpcg: clock-controller@5d400000 { - compatible = "fsl,imx8qxp-lpcg-lsio"; - reg = <0x5d400000 0x400000>; - #clock-cells = <1>; - }; - }; - thermal_zones: thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -629,4 +256,14 @@ }; }; }; + + /* sorted in register address */ + #include "imx8-ss-adma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-ddr.dtsi" + #include "imx8-ss-lsio.dtsi" }; + +#include "imx8qxp-ss-adma.dtsi" +#include "imx8qxp-ss-conn.dtsi" +#include "imx8qxp-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 07c099b4ed5b..163f33b46e4f 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/reset/altr,rst-mgr-s10.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/agilex-clock.h> / { @@ -61,10 +62,10 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 170 4>, - <0 171 4>, - <0 172 4>, - <0 173 4>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -77,7 +78,7 @@ method = "smc"; }; - intc: intc@fffc1000 { + intc: interrupt-controller@fffc1000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -87,6 +88,48 @@ <0x0 0xfffc6000 0x0 0x2000>; }; + clocks { + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb-intosc-ls-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s-free-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + usbphy0: usbphy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -108,38 +151,10 @@ #clock-cells = <1>; }; - clocks { - cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - cb_intosc_ls_clk: cb-intosc-ls-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - f2s_free_clk: f2s-free-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - osc1: osc1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - qspi_clk: qspi-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - }; - }; - gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; - interrupts = <0 90 4>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; @@ -157,7 +172,7 @@ gmac1: ethernet@ff802000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff802000 0x2000>; - interrupts = <0 91 4>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; @@ -175,7 +190,7 @@ gmac2: ethernet@ff804000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff804000 0x2000>; - interrupts = <0 92 4>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; @@ -206,7 +221,7 @@ reg = <0>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 110 4>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -226,7 +241,7 @@ reg = <0>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 111 4>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -235,7 +250,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02800 0x100>; - interrupts = <0 103 4>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C0_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -246,7 +261,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02900 0x100>; - interrupts = <0 104 4>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C1_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -257,7 +272,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02a00 0x100>; - interrupts = <0 105 4>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C2_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -268,7 +283,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02b00 0x100>; - interrupts = <0 106 4>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C3_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -279,7 +294,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02c00 0x100>; - interrupts = <0 107 4>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C4_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -290,7 +305,7 @@ #size-cells = <0>; compatible = "altr,socfpga-dw-mshc"; reg = <0xff808000 0x1000>; - interrupts = <0 96 4>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; fifo-depth = <0x400>; resets = <&rst SDMMC_RESET>; reset-names = "reset"; @@ -301,14 +316,14 @@ status = "disabled"; }; - nand: nand@ffb90000 { + nand: nand-controller@ffb90000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; reg = <0xffb90000 0x10000>, <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; - interrupts = <0 97 4>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clkmgr AGILEX_NAND_CLK>, <&clkmgr AGILEX_NAND_X_CLK>, <&clkmgr AGILEX_NAND_ECC_CLK>; @@ -325,15 +340,15 @@ pdma: pdma@ffda0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xffda0000 0x1000>; - interrupts = <0 81 4>, - <0 82 4>, - <0 83 4>, - <0 84 4>, - <0 85 4>, - <0 86 4>, - <0 87 4>, - <0 88 4>, - <0 89 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -355,17 +370,43 @@ #global-interrupts = <2>; #iommu-cells = <1>; interrupt-parent = <&intc>; - interrupts = <0 128 4>, /* Global Secure Fault */ - <0 129 4>, /* Global Non-secure Fault */ + /* Global Secure Fault */ + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + /* Global Non-secure Fault */ + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, /* Non-secure Context Interrupts (32) */ - <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, - <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, - <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, - <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, - <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, - <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, - <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, - <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; stream-match-mask = <0x7ff0>; clocks = <&clkmgr AGILEX_MPU_CCU_CLK>, <&clkmgr AGILEX_L3_MAIN_FREE_CLK>, @@ -378,7 +419,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda4000 0x1000>; - interrupts = <0 99 4>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst SPIM0_RESET>; reset-names = "spi"; reg-io-width = <4>; @@ -392,7 +433,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x1000>; - interrupts = <0 100 4>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst SPIM1_RESET>; reset-names = "spi"; reg-io-width = <4>; @@ -406,18 +447,9 @@ reg = <0xffd12000 0x500>; }; - /* Local timer */ - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - }; - timer0: timer0@ffc03000 { compatible = "snps,dw-apb-timer"; - interrupts = <0 113 4>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc03000 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; @@ -425,7 +457,7 @@ timer1: timer1@ffc03100 { compatible = "snps,dw-apb-timer"; - interrupts = <0 114 4>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc03100 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; @@ -433,7 +465,7 @@ timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; - interrupts = <0 115 4>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd00000 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; @@ -441,16 +473,16 @@ timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; - interrupts = <0 116 4>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd00100 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; }; - uart0: serial0@ffc02000 { + uart0: serial@ffc02000 { compatible = "snps,dw-apb-uart"; reg = <0xffc02000 0x100>; - interrupts = <0 108 4>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART0_RESET>; @@ -458,10 +490,10 @@ clocks = <&clkmgr AGILEX_L4_SP_CLK>; }; - uart1: serial1@ffc02100 { + uart1: serial@ffc02100 { compatible = "snps,dw-apb-uart"; reg = <0xffc02100 0x100>; - interrupts = <0 109 4>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART1_RESET>; @@ -469,16 +501,10 @@ status = "disabled"; }; - usbphy0: usbphy@0 { - #phy-cells = <0>; - compatible = "usb-nop-xceiv"; - status = "okay"; - }; - usb0: usb@ffb00000 { compatible = "snps,dwc2"; reg = <0xffb00000 0x40000>; - interrupts = <0 93 4>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0>; phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; @@ -491,7 +517,7 @@ usb1: usb@ffb40000 { compatible = "snps,dwc2"; reg = <0xffb40000 0x40000>; - interrupts = <0 94 4>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0>; phy-names = "usb2-phy"; resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; @@ -504,7 +530,7 @@ watchdog0: watchdog@ffd00200 { compatible = "snps,dw-wdt"; reg = <0xffd00200 0x100>; - interrupts = <0 117 4>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG0_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -513,7 +539,7 @@ watchdog1: watchdog@ffd00300 { compatible = "snps,dw-wdt"; reg = <0xffd00300 0x100>; - interrupts = <0 118 4>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG1_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -522,7 +548,7 @@ watchdog2: watchdog@ffd00400 { compatible = "snps,dw-wdt"; reg = <0xffd00400 0x100>; - interrupts = <0 125 4>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG2_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -531,7 +557,7 @@ watchdog3: watchdog@ffd00500 { compatible = "snps,dw-wdt"; reg = <0xffd00500 0x100>; - interrupts = <0 126 4>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG3_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -548,7 +574,7 @@ altr,sysmgr-syscon = <&sysmgr>; #address-cells = <1>; #size-cells = <1>; - interrupts = <0 15 4>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; ranges; @@ -607,7 +633,7 @@ #size-cells = <0>; reg = <0xff8d2000 0x100>, <0xff900000 0x100000>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index a7a83f29f00b..0f7a0ba344be 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -41,14 +41,6 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; - - soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; }; &gpio1 { @@ -92,6 +84,10 @@ bus-width = <4>; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; @@ -117,7 +113,7 @@ m25p,fast-read; cdns,page-size = <256>; cdns,block-size = <16>; - cdns,read-delay = <1>; + cdns,read-delay = <2>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts index 979aa59a6bd0..cc2dcabf34e3 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts @@ -20,17 +20,17 @@ leds { compatible = "gpio-leds"; - hps0 { + led0 { label = "hps_led0"; gpios = <&portb 20 GPIO_ACTIVE_HIGH>; }; - hps1 { + led1 { label = "hps_led1"; gpios = <&portb 19 GPIO_ACTIVE_HIGH>; }; - hps2 { + led2 { label = "hps_led2"; gpios = <&portb 21 GPIO_ACTIVE_HIGH>; }; @@ -41,14 +41,6 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; - - soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; }; &gpio1 { @@ -121,6 +113,10 @@ }; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts index 5f56e2697fee..01f1307ce4ac 100644 --- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -23,14 +23,6 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; - - soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; }; &clkmgr { @@ -44,6 +36,10 @@ bus-width = <4>; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index deba27ab7657..a1c50adc98fa 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -13,7 +13,15 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-damu.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index db17d0a4ed57..a9cca9c146fd 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -805,7 +805,7 @@ ranges; status = "disabled"; - usb_host0: xhci@11270000 { + usb_host0: usb@11270000 { compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci"; reg = <0 0x11270000 0 0x1000>; @@ -818,7 +818,7 @@ }; }; - u3phy0: usb-phy@11290000 { + u3phy0: t-phy@11290000 { compatible = "mediatek,mt2712-tphy", "mediatek,generic-tphy-v2"; #address-cells = <1>; @@ -869,7 +869,7 @@ ranges; status = "disabled"; - usb_host1: xhci@112c0000 { + usb_host1: usb@112c0000 { compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci"; reg = <0 0x112c0000 0 0x1000>; @@ -882,7 +882,7 @@ }; }; - u3phy1: usb-phy@112e0000 { + u3phy1: t-phy@112e0000 { compatible = "mediatek,mt2712-tphy", "mediatek,generic-tphy-v2"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 08ad0ffb24df..f2dc850010f1 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -495,6 +495,16 @@ groups = "watchdog"; }; }; + + wmac_pins: wmac-pins { + mux { + function = "antsel"; + groups = "antsel0", "antsel1", "antsel2", "antsel3", + "antsel4", "antsel5", "antsel6", "antsel7", + "antsel8", "antsel9", "antsel12", "antsel13", + "antsel14", "antsel15", "antsel16", "antsel17"; + }; + }; }; &pwm { @@ -559,5 +569,7 @@ }; &wmac { + pinctrl-names = "default"; + pinctrl-0 = <&wmac_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 7c6d871538a6..890a942ec608 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -742,8 +742,8 @@ status = "disabled"; }; - u3phy: usb-phy@1a0c4000 { - compatible = "mediatek,mt7622-u3phy", + u3phy: t-phy@1a0c4000 { + compatible = "mediatek,mt7622-tphy", "mediatek,generic-tphy-v1"; reg = <0 0x1a0c4000 0 0x700>; #address-cells = <2>; @@ -877,8 +877,9 @@ status = "disabled"; }; - sata_phy: sata-phy@1a243000 { - compatible = "mediatek,generic-tphy-v1"; + sata_phy: t-phy@1a243000 { + compatible = "mediatek,mt7622-tphy", + "mediatek,generic-tphy-v1"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 6dffada2e66b..f6a1738dfbaa 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -294,7 +294,7 @@ &pwrap { /* Only MT8173 E1 needs USB power domain */ - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + power-domains = <&spm MT8173_POWER_DOMAIN_USB>; pmic: mt6397 { compatible = "mediatek,mt6397"; @@ -516,10 +516,8 @@ extcon = <&extcon_usb>; dr_mode = "otg"; wakeup-source; - pinctrl-names = "default", "id_float", "id_ground"; + pinctrl-names = "default"; pinctrl-0 = <&usb_id_pins_float>; - pinctrl-1 = <&usb_id_pins_float>; - pinctrl-2 = <&usb_id_pins_ground>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 7fa870e4386a..003a5653c505 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -631,7 +631,7 @@ #mbox-cells = <2>; }; - mipi_tx0: mipi-dphy@10215000 { + mipi_tx0: dsi-phy@10215000 { compatible = "mediatek,mt8173-mipi-tx"; reg = <0 0x10215000 0 0x1000>; clocks = <&clk26m>; @@ -641,7 +641,7 @@ status = "disabled"; }; - mipi_tx1: mipi-dphy@10216000 { + mipi_tx1: dsi-phy@10216000 { compatible = "mediatek,mt8173-mipi-tx"; reg = <0 0x10216000 0 0x1000>; clocks = <&clk26m>; @@ -926,7 +926,7 @@ }; ssusb: usb@11271000 { - compatible = "mediatek,mt8173-mtu3"; + compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3"; reg = <0 0x11271000 0 0x3000>, <0 0x11280700 0 0x0100>; reg-names = "mac", "ippc"; @@ -943,8 +943,9 @@ ranges; status = "disabled"; - usb_host: xhci@11270000 { - compatible = "mediatek,mt8173-xhci"; + usb_host: usb@11270000 { + compatible = "mediatek,mt8173-xhci", + "mediatek,mtk-xhci"; reg = <0 0x11270000 0 0x1000>; reg-names = "mac"; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; @@ -955,7 +956,7 @@ }; }; - u3phy: usb-phy@11290000 { + u3phy: t-phy@11290000 { compatible = "mediatek,mt8173-u3phy"; reg = <0 0x11290000 0 0x800>; #address-cells = <2>; @@ -1235,7 +1236,7 @@ <&mmsys CLK_MM_DSI1_DIGITAL>, <&mipi_tx1>; clock-names = "engine", "digital", "hs"; - phy = <&mipi_tx1>; + phys = <&mipi_tx1>; phy-names = "dphy"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 3249c959f76f..edff1e03e6fe 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -352,6 +352,10 @@ }; }; +&mfg { + domain-supply = <&mt6358_vgpu_reg>; +}; + &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi_pins_0>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts new file mode 100644 index 000000000000..42ba9c00866c --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +/ { + model = "Google damu board"; + compatible = "google,damu", "mediatek,mt8183"; +}; + +&touchscreen { + status = "okay"; + + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_DAMU"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts new file mode 100644 index 000000000000..36d2c3b3cadf --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-juniper.dtsi" + +/ { + model = "Google juniper sku16 board"; + compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi new file mode 100644 index 000000000000..078bc765646f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +&i2c2 { + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_JUNIPER"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi new file mode 100644 index 000000000000..4049dff8464b --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +#include "mt8183-kukui.dtsi" + +/ { + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&pp3300_panel>; + ddc-i2c-bus = <&i2c4>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + + pp1200_mipibrdg: pp1200-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1200_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1200_mipibrdg_en>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 54 GPIO_ACTIVE_HIGH>; + }; + + pp1800_mipibrdg: pp1800-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1800_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; + + pp3300_panel: pp3300-panel { + compatible = "regulator-fixed"; + regulator-name = "pp3300_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_panel_pins>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 35 GPIO_ACTIVE_HIGH>; + }; + + vddio_mipibrdg: vddio-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "vddio_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&vddio_mipibrdg_en>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 37 GPIO_ACTIVE_HIGH>; + }; + + volume_buttons: volume-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&volume_button_pins>; + + volume_down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <100>; + + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + volume_up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <100>; + + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&dsi0 { + status = "okay"; + /delete-node/panel@0; + ports { + port { + dsi_out: endpoint { + remote-endpoint = <&anx7625_in>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <100000>; + + anx_bridge: anx7625@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_pins>; + panel_flags = <1>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1200_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&vddio_mipibrdg>; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + anx7625_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&i2c_tunnel { + google,remote-bus = <2>; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + pp1200_mipibrdg_en: pp1200-mipibrdg-en { + pins1 { + pinmux = <PINMUX_GPIO54__FUNC_GPIO54>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + pp3300_panel_pins: pp3300-panel-pins { + panel_3v3_enable: panel-3v3-enable { + pinmux = <PINMUX_GPIO35__FUNC_GPIO35>; + output-low; + }; + }; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + anx7625_pins: anx7625-pins { + pins1 { + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>, + <PINMUX_GPIO73__FUNC_GPIO73>; + output-low; + }; + pins2 { + pinmux = <PINMUX_GPIO4__FUNC_GPIO4>; + input-enable; + bias-pull-up; + }; + }; + + touchscreen_pins: touchscreen-pins { + touch_int_odl { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + touch_rst_l { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + output-high; + }; + }; + + trackpad_pins: trackpad-pins { + trackpad_int { + pinmux = <PINMUX_GPIO7__FUNC_GPIO7>; + input-enable; + bias-disable; /* pulled externally */ + }; + }; + + vddio_mipibrdg_en: vddio-mipibrdg-en { + pins1 { + pinmux = <PINMUX_GPIO37__FUNC_GPIO37>; + output-low; + }; + }; + + volume_button_pins: volume-button-pins { + voldn-btn-odl { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + input-enable; + bias-pull-up; + }; + + volup-btn-odl { + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>; + input-enable; + bias-pull-up; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts new file mode 100644 index 000000000000..20eb0dc68f09 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-kakadu.dtsi" + +/ { + model = "MediaTek kakadu board"; + compatible = "google,kakadu-rev3", "google,kakadu-rev2", + "google,kakadu", "mediatek,mt8183"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi new file mode 100644 index 000000000000..b442e38a3156 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ + +#include "mt8183-kukui.dtsi" +#include <dt-bindings/input/gpio-keys.h> + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; +}; + +&bluetooth { + firmware-name = "nvm_00440302_i2s_eu.bin"; +}; + +&i2c0 { + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@58 { + compatible = "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@54 { + compatible = "atmel,24c32"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&mipi_tx0 { + drive-strength-microamp = <5800>; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + open_touch: open_touch { + irq_pin { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + rst_pin { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + + /* + * The pen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the pen was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the pen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; + + pen_eject: peneject { + pen_eject { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + input-enable; + /* External pull-up. */ + bias-disable; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KAKADU"; +}; + +&panel { + status = "okay"; + compatible = "boe,tv105wum-nw0"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts new file mode 100644 index 000000000000..e3dd75bdaea4 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + * + * SKU: 0x10 => 16 + * - bit 8: Camera: 0 (OV5695) + * - bits 7..4: Panel ID: 0x1 (AUO) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku16 board"; + compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts new file mode 100644 index 000000000000..d81935ae07bc --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + * + * SKU: 0x110 => 272 + * - bit 8: Camera: 1 (GC5035) + * - bits 7..4: Panel ID: 0x1 (AUO) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku272 board"; + compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts new file mode 100644 index 000000000000..f4082fbe0517 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + * + * SKU: 0x120 => 288 + * - bit 8: Camera: 1 (GC5035) + * - bits 7..4: Panel ID: 0x2 (BOE) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku288 board"; + compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "boe,tv101wum-n53"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts new file mode 100644 index 000000000000..7739358008ee --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + * + * SKU: 0x20 => 32 + * - bit 8: Camera: 0 (OV5695) + * - bits 7..4: Panel ID: 0x2 (BOE) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku32 board"; + compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "boe,tv101wum-n53"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi new file mode 100644 index 000000000000..2f5234a16ead --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui.dtsi" + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c0 { + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_default>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@58 { + compatible = "atmel,24c64"; + reg = <0x58>; + pagesize = <32>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + touch_default: touchdefault { + pin_irq { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + touch_pin_reset: pin_reset { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + + /* + * The touchscreen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the controller was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the touchscreen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KODAMA"; +}; + +&i2c_tunnel { + google,remote-bus = <2>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts new file mode 100644 index 000000000000..eb6e595c2975 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021 BayLibre, SAS. + * Author: Fabien Parent <[email protected]> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "mt8183.dtsi" +#include "mt6358.dtsi" + +/ { + model = "Pumpkin MT8183"; + compatible = "mediatek,mt8183-pumpkin", "mediatek,mt8183"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: scp_mem_region { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-red { + label = "red"; + gpios = <&pio 155 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-green { + label = "green"; + gpios = <&pio 156 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + ntc@0 { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <390000>; + pulldown-ohm = <0>; + io-channels = <&auxadc 0>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_0>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_1>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_2>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_3>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_4>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_5>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x12814>; + vmmc-supply = <&mt6358_vemc_reg>; + vqmmc-supply = <&mt6358_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + cap-sdio-irq; + no-mmc; + no-sd; + vmmc-supply = <&mt6358_vmch_reg>; + vqmmc-supply = <&mt6358_vmc_reg>; + keep-power-in-suspend; + enable-sdio-wakeup; + non-removable; +}; + +&pio { + i2c_pins_0: i2c0 { + pins_i2c{ + pinmux = <PINMUX_GPIO82__FUNC_SDA0>, + <PINMUX_GPIO83__FUNC_SCL0>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_1: i2c1 { + pins_i2c{ + pinmux = <PINMUX_GPIO81__FUNC_SDA1>, + <PINMUX_GPIO84__FUNC_SCL1>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_2: i2c2 { + pins_i2c{ + pinmux = <PINMUX_GPIO103__FUNC_SCL2>, + <PINMUX_GPIO104__FUNC_SDA2>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_3: i2c3 { + pins_i2c{ + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_4: i2c4 { + pins_i2c{ + pinmux = <PINMUX_GPIO105__FUNC_SCL4>, + <PINMUX_GPIO106__FUNC_SDA4>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_5: i2c5 { + pins_i2c{ + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c6_pins: i2c6 { + pins_cmd_dat { + pinmux = <PINMUX_GPIO113__FUNC_SCL6>, + <PINMUX_GPIO114__FUNC_SDA6>; + mediatek,pull-up-adv = <3>; + }; + }; + + mmc0_pins_default: mmc0-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <01>; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_ds { + pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + }; + + mmc1_pins_default: mmc1-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + input-enable; + mediatek,pull-down-adv = <10>; + }; + + pins_pmu { + pinmux = <PINMUX_GPIO178__FUNC_GPIO178>; + output-high; + }; + }; + + mmc1_pins_uhs: mmc1-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + drive-strength = <MTK_DRIVE_6mA>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + mediatek,pull-down-adv = <10>; + input-enable; + }; + }; +}; + +&mfg { + domain-supply = <&mt6358_vgpu_reg>; +}; + +&cpu0 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu5 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu6 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&uart0 { + status = "okay"; +}; + +&scp { + status = "okay"; +}; + +&dsi0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 80519a145f13..0ff7b67a6806 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/reset-controller/mt8183-resets.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/thermal/thermal.h> #include "mt8183-pinfunc.h" / { @@ -657,6 +658,142 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt8183-thermal"; + reg = <0 0x1100b000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_THERM>, + <&infracfg CLK_INFRA_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>; + interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + }; + + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <100>; + polling-delay = <500>; + thermal-sensors = <&thermal 0>; + sustainable-power = <5000>; + + trips { + threshold: trip-point@0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu2 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu3 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <3072>; + }; + map1 { + trip = <&target>; + cooling-device = <&cpu4 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu5 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu6 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu7 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <1024>; + }; + }; + }; + + /* The tzts1 ~ tzts6 don't need to polling */ + /* The tzts1 ~ tzts6 don't need to thermal throttle */ + + tzts1: tzts1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 1>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts2: tzts2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 2>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts3: tzts3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 3>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts4: tzts4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 4>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts5: tzts5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 5>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tztsABB: tztsABB { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 6>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -874,13 +1011,13 @@ clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, <&infracfg CLK_INFRA_USB>; clock-names = "sys_ck", "ref_ck"; - mediatek,syscon-wakeup = <&pericfg 0x400 0>; + mediatek,syscon-wakeup = <&pericfg 0x420 101>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; - usb_host: xhci@11200000 { + usb_host: usb@11200000 { compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci"; reg = <0 0x11200000 0 0x1000>; @@ -923,11 +1060,10 @@ status = "disabled"; }; - mipi_tx0: mipi-dphy@11e50000 { + mipi_tx0: dsi-phy@11e50000 { compatible = "mediatek,mt8183-mipi-tx"; reg = <0 0x11e50000 0 0x1000>; clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>; - clock-names = "ref_clk"; #clock-cells = <0>; #phy-cells = <0>; clock-output-names = "mipi_tx0_pll"; @@ -941,16 +1077,19 @@ reg = <0 0x11f10000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + thermal_calibration: calib@180 { + reg = <0x180 0xc>; + }; + mipi_tx_calibration: calib@190 { reg = <0x190 0xc>; }; }; - u3phy: usb-phy@11f40000 { + u3phy: t-phy@11f40000 { compatible = "mediatek,mt8183-tphy", "mediatek,generic-tphy-v2"; #address-cells = <1>; - #phy-cells = <1>; #size-cells = <1>; ranges = <0 0 0x11f40000 0x1000>; status = "okay"; @@ -983,6 +1122,9 @@ compatible = "mediatek,mt8183-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; ovl0: ovl@14008000 { @@ -1058,6 +1200,7 @@ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; }; aal0: aal@14010000 { @@ -1067,6 +1210,7 @@ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_AAL0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>; }; gamma0: gamma@14011000 { @@ -1075,6 +1219,7 @@ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_GAMMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; }; dither0: dither@14012000 { @@ -1083,6 +1228,7 @@ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>; }; dsi0: dsi@14014000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index b80e95574bef..bbe5a1419eff 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -480,7 +480,7 @@ }; usb0: usb@11100000 { - compatible = "mediatek,mtk-musb"; + compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb"; reg = <0 0x11100000 0 0x1000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "mc"; @@ -493,7 +493,7 @@ }; usb1: usb@11190000 { - compatible = "mediatek,mtk-musb"; + compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb"; reg = <0 0x11190000 0 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "mc"; @@ -506,8 +506,9 @@ status = "disabled"; }; - usb_phy: usb@11110000 { - compatible = "mediatek,generic-tphy-v1"; + usb_phy: t-phy@11110000 { + compatible = "mediatek,mt8516-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x11110000 0 0x800>; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index 63fd70086bb8..fcddec14738d 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -56,7 +56,7 @@ tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; - reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; @@ -188,6 +188,7 @@ &usb0 { status = "okay"; dr_mode = "peripheral"; + usb-role-switch; usb_con: connector { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 9f5f5e1fa82e..683743f81849 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -10,7 +10,7 @@ model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; - aconnect { + aconnect@2900000 { status = "okay"; dma-controller@2930000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index fd9177447711..fcd71bfc6707 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -23,7 +23,7 @@ }; chosen { - bootargs = "earlycon console=ttyS0,115200n8"; + bootargs = "earlycon console=ttyS0,115200n8 fw_devlink=on"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 02b26b39cedc..9f75bbf00cf7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -73,7 +73,7 @@ snps,rxpbl = <8>; }; - aconnect { + aconnect@2900000 { compatible = "nvidia,tegra186-aconnect", "nvidia,tegra210-aconnect"; clocks = <&bpmp TEGRA186_CLK_APE>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 2888efc42ba1..d618f197a1d3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -651,6 +651,8 @@ reg = <0x1a>; interrupt-parent = <&gpio>; interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>; + clock-names = "mclk"; realtek,jd-src = <2>; sound-name-prefix = "CVB-RT"; @@ -658,7 +660,6 @@ rt5658_ep: endpoint { remote-endpoint = <&i2s1_dap_ep>; mclk-fs = <256>; - clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi index 7da3d48cb410..14da4206ea66 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi @@ -5,6 +5,10 @@ model = "NVIDIA Jetson Xavier NX (SD-card)"; compatible = "nvidia,p3668-0000", "nvidia,tegra194"; + aliases { + mmc0 = "/bus@0/mmc@3400000"; + }; + bus@0 { /* SDMMC1 (SD/MMC) */ mmc@3400000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi index b7808648cfe4..f5a9ebbfb12f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi @@ -5,6 +5,10 @@ model = "NVIDIA Jetson Xavier NX (eMMC)"; compatible = "nvidia,p3668-0001", "nvidia,tegra194"; + aliases { + mmc0 = "/bus@0/mmc@3460000"; + }; + bus@0 { /* SDMMC4 (eMMC) */ mmc@3460000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi index 4f12721c332b..f16b0aa8a374 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi @@ -14,7 +14,6 @@ i2c5 = "/bus@0/i2c@31c0000"; i2c6 = "/bus@0/i2c@c250000"; i2c7 = "/bus@0/i2c@31e0000"; - mmc0 = "/bus@0/mmc@3460000"; rtc0 = "/bpmp/i2c/pmic@3c"; rtc1 = "/bus@0/rtc@c2a0000"; serial0 = &tcu; diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index b040447575ad..dcfb32ee5cb6 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -285,7 +285,7 @@ static int omap_l3_probe(struct platform_device *pdev) */ l3->debug_irq = platform_get_irq(pdev, 0); ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler, - 0x0, "l3-dbg-irq", l3); + IRQF_NO_THREAD, "l3-dbg-irq", l3); if (ret) { dev_err(l3->dev, "request_irq failed for %d\n", l3->debug_irq); @@ -294,7 +294,7 @@ static int omap_l3_probe(struct platform_device *pdev) l3->app_irq = platform_get_irq(pdev, 1); ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler, - 0x0, "l3-app-irq", l3); + IRQF_NO_THREAD, "l3-app-irq", l3); if (ret) dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq); diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index a27d751cf219..65943d1a2557 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -635,6 +635,51 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata) return 0; } +/* Interconnect instances to probe before l4_per instances */ +static struct resource early_bus_ranges[] = { + /* am3/4 l4_wkup */ + { .start = 0x44c00000, .end = 0x44c00000 + 0x300000, }, + /* omap4/5 and dra7 l4_cfg */ + { .start = 0x4a000000, .end = 0x4a000000 + 0x300000, }, + /* omap4 l4_wkup */ + { .start = 0x4a300000, .end = 0x4a300000 + 0x30000, }, + /* omap5 and dra7 l4_wkup without dra7 dcan segment */ + { .start = 0x4ae00000, .end = 0x4ae00000 + 0x30000, }, +}; + +static atomic_t sysc_defer = ATOMIC_INIT(10); + +/** + * sysc_defer_non_critical - defer non_critical interconnect probing + * @ddata: device driver data + * + * We want to probe l4_cfg and l4_wkup interconnect instances before any + * l4_per instances as l4_per instances depend on resources on l4_cfg and + * l4_wkup interconnects. + */ +static int sysc_defer_non_critical(struct sysc *ddata) +{ + struct resource *res; + int i; + + if (!atomic_read(&sysc_defer)) + return 0; + + for (i = 0; i < ARRAY_SIZE(early_bus_ranges); i++) { + res = &early_bus_ranges[i]; + if (ddata->module_pa >= res->start && + ddata->module_pa <= res->end) { + atomic_set(&sysc_defer, 0); + + return 0; + } + } + + atomic_dec_if_positive(&sysc_defer); + + return -EPROBE_DEFER; +} + static struct device_node *stdout_path; static void sysc_init_stdout_path(struct sysc *ddata) @@ -856,15 +901,19 @@ static int sysc_map_and_check_registers(struct sysc *ddata) struct device_node *np = ddata->dev->of_node; int error; - if (!of_get_property(np, "reg", NULL)) - return 0; - error = sysc_parse_and_check_child_range(ddata); if (error) return error; + error = sysc_defer_non_critical(ddata); + if (error) + return error; + sysc_check_children(ddata); + if (!of_get_property(np, "reg", NULL)) + return 0; + error = sysc_parse_registers(ddata); if (error) return error; @@ -1447,12 +1496,16 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("dwc3", 0, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff, 0), SYSC_QUIRK("d2d", 0x4a0b6000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0), SYSC_QUIRK("d2d", 0x4a0cd000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0), + SYSC_QUIRK("elm", 0x48080000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0), + SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x40441403, 0xffff0fff, 0), + SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x50440500, 0xffffffff, 0), SYSC_QUIRK("epwmss", 0, 0, 0x4, -ENODEV, 0x47400001, 0xffffffff, 0), SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -ENODEV, 0, 0, 0), SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff, 0), SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50031d00, 0xffffffff, 0), SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0), SYSC_QUIRK("iss", 0, 0, 0x10, -ENODEV, 0x40000101, 0xffffffff, 0), + SYSC_QUIRK("keypad", 0x4a31c000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0), SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44306302, 0xffffffff, 0), SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44307b02, 0xffffffff, 0), SYSC_QUIRK("mcbsp", 0, -ENODEV, 0x8c, -ENODEV, 0, 0, 0), @@ -1464,11 +1517,14 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("ocp2scp", 0, 0, -ENODEV, -ENODEV, 0x50060007, 0xffffffff, 0), SYSC_QUIRK("padconf", 0, 0, 0x10, -ENODEV, 0x4fff0800, 0xffffffff, 0), SYSC_QUIRK("padconf", 0, 0, -ENODEV, -ENODEV, 0x40001100, 0xffffffff, 0), + SYSC_QUIRK("pcie", 0x51000000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0), + SYSC_QUIRK("pcie", 0x51800000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0), SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000100, 0xffffffff, 0), SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x00004102, 0xffffffff, 0), SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0), SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0), SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0), + SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0), SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0), SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0), SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0), @@ -2802,6 +2858,7 @@ static int sysc_init_soc(struct sysc *ddata) const struct soc_device_attribute *match; struct ti_sysc_platform_data *pdata; unsigned long features = 0; + struct device_node *np; if (sysc_soc) return 0; @@ -2822,6 +2879,21 @@ static int sysc_init_soc(struct sysc *ddata) if (match && match->data) sysc_soc->soc = (int)match->data; + /* + * Check and warn about possible old incomplete dtb. We now want to see + * simple-pm-bus instead of simple-bus in the dtb for genpd using SoCs. + */ + switch (sysc_soc->soc) { + case SOC_AM3: + case SOC_AM4: + np = of_find_node_by_path("/ocp"); + WARN_ONCE(np && of_device_is_compatible(np, "simple-bus"), + "ti-sysc: Incomplete old dtb, please update\n"); + break; + default: + break; + } + /* Ignore devices that are not available on HS and EMU SoCs */ if (!sysc_soc->general_purpose) { switch (sysc_soc->soc) { @@ -3053,7 +3125,9 @@ static int sysc_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); - reset_control_assert(ddata->rsts); + + if (!reset_control_status(ddata->rsts)) + reset_control_assert(ddata->rsts); unprepare: sysc_unprepare(ddata); diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index f0542391ca4b..90e0a9ea6351 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -156,6 +156,8 @@ static const struct omap_clkctrl_reg_data omap5_l3main1_clkctrl_regs[] __initcon static const struct omap_clkctrl_reg_data omap5_l3main2_clkctrl_regs[] __initconst = { { OMAP5_L3_MAIN_2_CLKCTRL, NULL, 0, "l3_iclk_div" }, + { OMAP5_L3_MAIN_2_GPMC_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" }, + { OMAP5_L3_MAIN_2_OCMC_RAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" }, { 0 }, }; diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c index b105af63854a..047cfbdc1330 100644 --- a/drivers/pci/controller/dwc/pci-dra7xx.c +++ b/drivers/pci/controller/dwc/pci-dra7xx.c @@ -443,8 +443,8 @@ static const struct dw_pcie_ep_ops pcie_ep_ops = { .get_features = dra7xx_pcie_get_features, }; -static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx, - struct platform_device *pdev) +static int dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx, + struct platform_device *pdev) { int ret; struct dw_pcie_ep *ep; @@ -472,8 +472,8 @@ static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx, return 0; } -static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx, - struct platform_device *pdev) +static int dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx, + struct platform_device *pdev) { int ret; struct dw_pcie *pci = dra7xx->pci; @@ -682,7 +682,7 @@ static int dra7xx_pcie_configure_two_lane(struct device *dev, return 0; } -static int __init dra7xx_pcie_probe(struct platform_device *pdev) +static int dra7xx_pcie_probe(struct platform_device *pdev) { u32 reg; int ret; @@ -938,6 +938,7 @@ static const struct dev_pm_ops dra7xx_pcie_pm_ops = { }; static struct platform_driver dra7xx_pcie_driver = { + .probe = dra7xx_pcie_probe, .driver = { .name = "dra7-pcie", .of_match_table = of_dra7xx_pcie_match, @@ -946,4 +947,4 @@ static struct platform_driver dra7xx_pcie_driver = { }, .shutdown = dra7xx_pcie_shutdown, }; -builtin_platform_driver_probe(dra7xx_pcie_driver, dra7xx_pcie_probe); +builtin_platform_driver(dra7xx_pcie_driver); diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c index bf1468e5bccb..ea64e187854e 100644 --- a/drivers/soc/ti/omap_prm.c +++ b/drivers/soc/ti/omap_prm.c @@ -88,6 +88,7 @@ struct omap_reset_data { #define OMAP_PRM_HAS_RSTCTRL BIT(0) #define OMAP_PRM_HAS_RSTST BIT(1) #define OMAP_PRM_HAS_NO_CLKDM BIT(2) +#define OMAP_PRM_RET_WHEN_IDLE BIT(3) #define OMAP_PRM_HAS_RESETS (OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST) @@ -174,7 +175,8 @@ static const struct omap_prm_data omap4_prm_data[] = { .name = "core", .base = 0x4a306700, .pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", - .rstmap = rst_map_012 + .rstmap = rst_map_012, + .flags = OMAP_PRM_RET_WHEN_IDLE, }, { .name = "ivahd", .base = 0x4a306f00, @@ -199,7 +201,8 @@ static const struct omap_prm_data omap4_prm_data[] = { }, { .name = "l4per", .base = 0x4a307400, - .pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton + .pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton, + .flags = OMAP_PRM_RET_WHEN_IDLE, }, { .name = "cefuse", .base = 0x4a307600, @@ -332,7 +335,7 @@ static const struct omap_prm_data dra7_prm_data[] = { { .name = "l3init", .base = 0x4ae07300, .pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_alwon, - .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012, + .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01, .clkdm_name = "pcie" }, { @@ -517,7 +520,7 @@ static int omap_prm_domain_power_on(struct generic_pm_domain *domain) { struct omap_prm_domain *prmd; int ret; - u32 v; + u32 v, mode; prmd = genpd_to_prm_domain(domain); if (!prmd->cap) @@ -530,7 +533,12 @@ static int omap_prm_domain_power_on(struct generic_pm_domain *domain) else v = readl_relaxed(prmd->prm->base + prmd->pwrstctrl); - writel_relaxed(v | OMAP_PRMD_ON_ACTIVE, + if (prmd->prm->data->flags & OMAP_PRM_RET_WHEN_IDLE) + mode = OMAP_PRMD_RETENTION; + else + mode = OMAP_PRMD_ON_ACTIVE; + + writel_relaxed((v & ~PRM_POWERSTATE_MASK) | mode, prmd->prm->base + prmd->pwrstctrl); /* wait for the transition bit to get cleared */ @@ -830,8 +838,12 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev, reset->prm->data->name, id); exit: - if (reset->clkdm) + if (reset->clkdm) { + /* At least dra7 iva needs a delay before clkdm idle */ + if (has_rstst) + udelay(1); pdata->clkdm_allow_idle(reset->clkdm); + } return ret; } diff --git a/include/dt-bindings/clock/omap5.h b/include/dt-bindings/clock/omap5.h index 41775272fd27..90e0d4b00127 100644 --- a/include/dt-bindings/clock/omap5.h +++ b/include/dt-bindings/clock/omap5.h @@ -32,6 +32,8 @@ /* l3main2 clocks */ #define OMAP5_L3_MAIN_2_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20) +#define OMAP5_L3_MAIN_2_GPMC_CLKCTRL OMAP5_CLKCTRL_INDEX(0x28) +#define OMAP5_L3_MAIN_2_OCMC_RAM_CLKCTRL OMAP5_CLKCTRL_INDEX(0x30) /* ipu clocks */ #define OMAP5_MMU_IPU_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20) |