diff options
| -rw-r--r-- | arch/arm/boot/dts/omap3-gta04.dtsi | 3 | ||||
| -rw-r--r-- | arch/arm/boot/dts/omap3-n950-n9.dtsi | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_device.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pmic-cpcap.c | 2 | ||||
| -rw-r--r-- | drivers/soc/ti/omap_prm.c | 11 |
6 files changed, 28 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index c8745bc800f7..7b8c18e6605e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -114,7 +114,7 @@ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; num-chipselects = <1>; /* lcd panel */ @@ -124,7 +124,6 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; - spi-cs-high; backlight= <&backlight>; label = "lcd"; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 11d41e86f814..7dde9fbb06d3 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -494,3 +494,11 @@ clock-names = "sysclk"; }; }; + +&aes1_target { + status = "disabled"; +}; + +&aes2_target { + status = "disabled"; +}; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index a720259099ed..0a4c9b0b13b0 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -203,6 +203,8 @@ static int osk_tps_setup(struct i2c_client *client, void *context) */ gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en"); gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1); + /* Free the GPIO again as the driver will request it */ + gpio_free(OSK_TPS_GPIO_USB_PWR_EN); /* Set GPIO 2 high so LED D3 is off by default */ tps65010_set_gpio_out_value(GPIO2, HIGH); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index f3191704cab9..56d6814bec26 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -230,10 +230,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb, break; case BUS_NOTIFY_BIND_DRIVER: od = to_omap_device(pdev); - if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) && - pm_runtime_status_suspended(dev)) { + if (od) { od->_driver_status = BUS_NOTIFY_BIND_DRIVER; - pm_runtime_set_active(dev); + if (od->_state == OMAP_DEVICE_STATE_ENABLED && + pm_runtime_status_suspended(dev)) { + pm_runtime_set_active(dev); + } } break; case BUS_NOTIFY_ADD_DEVICE: diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c index eab281a5fc9f..09076ad0576d 100644 --- a/arch/arm/mach-omap2/pmic-cpcap.c +++ b/arch/arm/mach-omap2/pmic-cpcap.c @@ -71,7 +71,7 @@ static struct omap_voltdm_pmic omap_cpcap_iva = { .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, .vddmin = 900000, - .vddmax = 1350000, + .vddmax = 1375000, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = 0x44, .volt_reg_addr = 0x0, diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c index 77f0051358f1..bf1468e5bccb 100644 --- a/drivers/soc/ti/omap_prm.c +++ b/drivers/soc/ti/omap_prm.c @@ -860,6 +860,7 @@ static int omap_prm_reset_init(struct platform_device *pdev, const struct omap_rst_map *map; struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev); char buf[32]; + u32 v; /* * Check if we have controllable resets. If either rstctrl is non-zero @@ -907,6 +908,16 @@ static int omap_prm_reset_init(struct platform_device *pdev, map++; } + /* Quirk handling to assert rst_map_012 bits on reset and avoid errors */ + if (prm->data->rstmap == rst_map_012) { + v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl); + if ((v & reset->mask) != reset->mask) { + dev_dbg(&pdev->dev, "Asserting all resets: %08x\n", v); + writel_relaxed(reset->mask, reset->prm->base + + reset->prm->data->rstctrl); + } + } + return devm_reset_controller_register(&pdev->dev, &reset->rcdev); } |