diff options
| -rw-r--r-- | Documentation/devicetree/bindings/arm/rockchip.txt | 3 | ||||
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3036.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3188.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk322x.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288-miqi.dts | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288-rock2-som.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288-rock2-square.dts | 41 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288-tinker.dts | 536 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288.dtsi | 8 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3xxx.dtsi | 16 |
11 files changed, 616 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index cc4ace6397ab..226ee9131078 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,5 +1,8 @@ Rockchip platforms device tree bindings --------------------------------------- +- Asus Tinker board + Required root node properties: + - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - Kylin RK3036 board: Required root node properties: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 93a572936292..889b8b9c9eb7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ + rk3288-tinker.dtb \ rk3288-veyron-brain.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ff9b90bfaefd..ec91325d3b6e 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -250,6 +250,8 @@ clock-names = "biu", "ciu"; fifo-depth = <0x100>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; status = "disabled"; }; @@ -262,6 +264,8 @@ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cru SRST_SDIO>; + reset-names = "reset"; status = "disabled"; }; @@ -286,6 +290,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index cf91254d0a43..fa1bdb8875ae 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -529,11 +529,11 @@ }; &global_timer { - interrupts = <GIC_PPI 11 0xf04>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; }; &local_timer { - interrupts = <GIC_PPI 13 0xf04>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; }; &i2c0 { diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 9dff8221112c..7cc344684f71 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -414,6 +414,8 @@ fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 21326f3e8564..30e93f694ae8 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -68,11 +68,9 @@ compatible = "gpio-leds"; work { - gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; label = "miqi:green:user"; - linux,default-trigger = "default-on"; - pinctrl-names = "default"; - pinctrl-0 = <&led_ctl>; + linux,default-trigger = "timer"; }; }; @@ -363,12 +361,6 @@ }; }; - leds { - led_ctl: led-ctl { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - sdmmc { /* * Default drive strength isn't enough to achieve even diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 1c0bbc9b928b..f0778a46bca9 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -136,7 +136,7 @@ regulator-always-on; }; - vcc_io: REG2 { + vcc_io: vccio_codec: REG2 { regulator-name = "VCC_IO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 96a2e745bb93..fbf11d410c42 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -86,6 +86,19 @@ #sound-dai-cells = <0>; }; + sound-i2s { + compatible = "rockchip,rk3288-hdmi-analog"; + pinctrl-names = "default"; + pinctrl-0 = <&phone_ctl>, <&hp_det>; + rockchip,audio-codec = <&es8388>; + rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + rockchip,i2s-controller = <&i2s>; + rockchip,model = "I2S"; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&hym8563>; @@ -173,10 +186,28 @@ }; }; +&i2c2 { + status = "okay"; + + es8388: es8388@10 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x10>; + AVDD-supply = <&vccio_codec>; + DVDD-supply = <&vccio_codec>; + HPVDD-supply = <&vccio_codec>; + PVDD-supply = <&vccio_codec>; + clocks = <&cru SCLK_I2S0_OUT>; + }; +}; + &i2c5 { status = "okay"; }; +&i2s { + status = "okay"; +}; + &pinctrl { ir { ir_int: ir-int { @@ -190,6 +221,16 @@ }; }; + headphone { + hp_det: hp-det { + rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + phone_ctl: phone-ctl { + rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts new file mode 100644 index 000000000000..f601c78386a9 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-tinker.dts @@ -0,0 +1,536 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3288.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Rockchip RK3288 Tinker Board"; + compatible = "asus,rk3288-tinker", "rockchip,rk3288"; + + memory { + reg = <0x0 0x80000000>; + device_type = "memory"; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + wakeup-source; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + act-led { + gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger="mmc0"; + }; + + heartbeat-led { + gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger="heartbeat"; + }; + + pwr-led { + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,tinker-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, + <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc18_ldo1: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_ldo1"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_mipi: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_codec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_sd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_sd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lan"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + sdcard-supply = <&vccio_sd>; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + eth_phy { + eth_phy_pwr: eth-phy-pwr { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ + &pcfg_pull_up>; + }; + + dvs_1: dvs-1 { + rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 \ + &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pwr_3g: pwr-3g { + rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc18_ldo1>; + status ="okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; + vmmc-supply = <&vcc33_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status= "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index df8a0dbe9d91..ad5d6022e95f 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -236,6 +236,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0c0000 0x4000>; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; status = "disabled"; }; @@ -248,6 +250,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0d0000 0x4000>; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; status = "disabled"; }; @@ -260,6 +264,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0e0000 0x4000>; + resets = <&cru SRST_SDIO1>; + reset-names = "reset"; status = "disabled"; }; @@ -272,6 +278,8 @@ fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0f0000 0x4000>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 0b45811cf28b..4aa6f60d6a22 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -132,14 +132,14 @@ global_timer: global-timer@1013c200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x1013c200 0x20>; - interrupts = <GIC_PPI 11 0x304>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; }; local_timer: local-timer@1013c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1013c600 0x20>; - interrupts = <GIC_PPI 13 0x304>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; }; @@ -223,7 +223,11 @@ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; + dmas = <&dmac2 1>; + dma-names = "rx-tx"; fifo-depth = <256>; + resets = <&cru SRST_SDMMC>; + reset-names = "reset"; status = "disabled"; }; @@ -233,7 +237,11 @@ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; clock-names = "biu", "ciu"; + dmas = <&dmac2 3>; + dma-names = "rx-tx"; fifo-depth = <256>; + resets = <&cru SRST_SDIO>; + reset-names = "reset"; status = "disabled"; }; @@ -243,7 +251,11 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; clock-names = "biu", "ciu"; + dmas = <&dmac2 4>; + dma-names = "rx-tx"; fifo-depth = <256>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; |