diff options
| -rw-r--r-- | drivers/net/can/kvaser_pciefd.c | 18 | ||||
| -rw-r--r-- | drivers/net/can/m_can/m_can.c | 116 | ||||
| -rw-r--r-- | drivers/net/can/spi/mcp251x.c | 2 | ||||
| -rw-r--r-- | drivers/net/can/spi/mcp251xfd/mcp251xfd-ram.c | 11 | ||||
| -rw-r--r-- | drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c | 34 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_main.c | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c | 14 | ||||
| -rw-r--r-- | drivers/net/mctp/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/net/mctp/mctp-serial.c | 113 | ||||
| -rw-r--r-- | net/can/bcm.c | 4 |
10 files changed, 240 insertions, 78 deletions
diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index a60d9efd5f8d..9ffc3ffb4e8f 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1686,6 +1686,7 @@ static irqreturn_t kvaser_pciefd_irq_handler(int irq, void *dev) const struct kvaser_pciefd_irq_mask *irq_mask = pcie->driver_data->irq_mask; u32 pci_irq = ioread32(KVASER_PCIEFD_PCI_IRQ_ADDR(pcie)); u32 srb_irq = 0; + u32 srb_release = 0; int i; if (!(pci_irq & irq_mask->all)) @@ -1699,17 +1700,14 @@ static irqreturn_t kvaser_pciefd_irq_handler(int irq, void *dev) kvaser_pciefd_transmit_irq(pcie->can[i]); } - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD0) { - /* Reset DMA buffer 0, may trigger new interrupt */ - iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, - KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); - } + if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD0) + srb_release |= KVASER_PCIEFD_SRB_CMD_RDB0; - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD1) { - /* Reset DMA buffer 1, may trigger new interrupt */ - iowrite32(KVASER_PCIEFD_SRB_CMD_RDB1, - KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); - } + if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD1) + srb_release |= KVASER_PCIEFD_SRB_CMD_RDB1; + + if (srb_release) + iowrite32(srb_release, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); return IRQ_HANDLED; } diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 7f63f866083e..012c3d22b01d 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -483,11 +483,10 @@ static inline void m_can_disable_all_interrupts(struct m_can_classdev *cdev) { m_can_coalescing_disable(cdev); m_can_write(cdev, M_CAN_ILE, 0x0); - cdev->active_interrupts = 0x0; if (!cdev->net->irq) { dev_dbg(cdev->dev, "Stop hrtimer\n"); - hrtimer_cancel(&cdev->hrtimer); + hrtimer_try_to_cancel(&cdev->hrtimer); } } @@ -1037,22 +1036,6 @@ end: return work_done; } -static int m_can_rx_peripheral(struct net_device *dev, u32 irqstatus) -{ - struct m_can_classdev *cdev = netdev_priv(dev); - int work_done; - - work_done = m_can_rx_handler(dev, NAPI_POLL_WEIGHT, irqstatus); - - /* Don't re-enable interrupts if the driver had a fatal error - * (e.g., FIFO read failure). - */ - if (work_done < 0) - m_can_disable_all_interrupts(cdev); - - return work_done; -} - static int m_can_poll(struct napi_struct *napi, int quota) { struct net_device *dev = napi->dev; @@ -1217,16 +1200,18 @@ static void m_can_coalescing_update(struct m_can_classdev *cdev, u32 ir) HRTIMER_MODE_REL); } -static irqreturn_t m_can_isr(int irq, void *dev_id) +/* This interrupt handler is called either from the interrupt thread or a + * hrtimer. This has implications like cancelling a timer won't be possible + * blocking. + */ +static int m_can_interrupt_handler(struct m_can_classdev *cdev) { - struct net_device *dev = (struct net_device *)dev_id; - struct m_can_classdev *cdev = netdev_priv(dev); + struct net_device *dev = cdev->net; u32 ir; + int ret; - if (pm_runtime_suspended(cdev->dev)) { - m_can_coalescing_disable(cdev); + if (pm_runtime_suspended(cdev->dev)) return IRQ_NONE; - } ir = m_can_read(cdev, M_CAN_IR); m_can_coalescing_update(cdev, ir); @@ -1250,11 +1235,9 @@ static irqreturn_t m_can_isr(int irq, void *dev_id) m_can_disable_all_interrupts(cdev); napi_schedule(&cdev->napi); } else { - int pkts; - - pkts = m_can_rx_peripheral(dev, ir); - if (pkts < 0) - goto out_fail; + ret = m_can_rx_handler(dev, NAPI_POLL_WEIGHT, ir); + if (ret < 0) + return ret; } } @@ -1272,8 +1255,9 @@ static irqreturn_t m_can_isr(int irq, void *dev_id) } else { if (ir & (IR_TEFN | IR_TEFW)) { /* New TX FIFO Element arrived */ - if (m_can_echo_tx_event(dev) != 0) - goto out_fail; + ret = m_can_echo_tx_event(dev); + if (ret != 0) + return ret; } } @@ -1281,16 +1265,31 @@ static irqreturn_t m_can_isr(int irq, void *dev_id) can_rx_offload_threaded_irq_finish(&cdev->offload); return IRQ_HANDLED; +} -out_fail: - m_can_disable_all_interrupts(cdev); - return IRQ_HANDLED; +static irqreturn_t m_can_isr(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct m_can_classdev *cdev = netdev_priv(dev); + int ret; + + ret = m_can_interrupt_handler(cdev); + if (ret < 0) { + m_can_disable_all_interrupts(cdev); + return IRQ_HANDLED; + } + + return ret; } static enum hrtimer_restart m_can_coalescing_timer(struct hrtimer *timer) { struct m_can_classdev *cdev = container_of(timer, struct m_can_classdev, hrtimer); + if (cdev->can.state == CAN_STATE_BUS_OFF || + cdev->can.state == CAN_STATE_STOPPED) + return HRTIMER_NORESTART; + irq_wake_thread(cdev->net->irq, cdev->net); return HRTIMER_NORESTART; @@ -1542,6 +1541,7 @@ static int m_can_chip_config(struct net_device *dev) else interrupts &= ~(IR_ERR_LEC_31X); } + cdev->active_interrupts = 0; m_can_interrupt_enable(cdev, interrupts); /* route all interrupts to INT0 */ @@ -1991,8 +1991,17 @@ static enum hrtimer_restart hrtimer_callback(struct hrtimer *timer) { struct m_can_classdev *cdev = container_of(timer, struct m_can_classdev, hrtimer); + int ret; + + if (cdev->can.state == CAN_STATE_BUS_OFF || + cdev->can.state == CAN_STATE_STOPPED) + return HRTIMER_NORESTART; - m_can_isr(0, cdev->net); + ret = m_can_interrupt_handler(cdev); + + /* On error or if napi is scheduled to read, stop the timer */ + if (ret < 0 || napi_is_scheduled(&cdev->napi)) + return HRTIMER_NORESTART; hrtimer_forward_now(timer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS)); @@ -2052,7 +2061,7 @@ static int m_can_open(struct net_device *dev) /* start the m_can controller */ err = m_can_start(dev); if (err) - goto exit_irq_fail; + goto exit_start_fail; if (!cdev->is_peripheral) napi_enable(&cdev->napi); @@ -2061,6 +2070,9 @@ static int m_can_open(struct net_device *dev) return 0; +exit_start_fail: + if (cdev->is_peripheral || dev->irq) + free_irq(dev->irq, dev); exit_irq_fail: if (cdev->is_peripheral) destroy_workqueue(cdev->tx_wq); @@ -2172,7 +2184,7 @@ static int m_can_set_coalesce(struct net_device *dev, return 0; } -static const struct ethtool_ops m_can_ethtool_ops = { +static const struct ethtool_ops m_can_ethtool_ops_coalescing = { .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ | @@ -2183,18 +2195,20 @@ static const struct ethtool_ops m_can_ethtool_ops = { .set_coalesce = m_can_set_coalesce, }; -static const struct ethtool_ops m_can_ethtool_ops_polling = { +static const struct ethtool_ops m_can_ethtool_ops = { .get_ts_info = ethtool_op_get_ts_info, }; -static int register_m_can_dev(struct net_device *dev) +static int register_m_can_dev(struct m_can_classdev *cdev) { + struct net_device *dev = cdev->net; + dev->flags |= IFF_ECHO; /* we support local echo */ dev->netdev_ops = &m_can_netdev_ops; - if (dev->irq) - dev->ethtool_ops = &m_can_ethtool_ops; + if (dev->irq && cdev->is_peripheral) + dev->ethtool_ops = &m_can_ethtool_ops_coalescing; else - dev->ethtool_ops = &m_can_ethtool_ops_polling; + dev->ethtool_ops = &m_can_ethtool_ops; return register_candev(dev); } @@ -2380,7 +2394,7 @@ int m_can_class_register(struct m_can_classdev *cdev) if (ret) goto rx_offload_del; - ret = register_m_can_dev(cdev->net); + ret = register_m_can_dev(cdev); if (ret) { dev_err(cdev->dev, "registering %s failed (err=%d)\n", cdev->net->name, ret); @@ -2427,12 +2441,15 @@ int m_can_class_suspend(struct device *dev) netif_device_detach(ndev); /* leave the chip running with rx interrupt enabled if it is - * used as a wake-up source. + * used as a wake-up source. Coalescing needs to be reset then, + * the timer is cancelled here, interrupts are done in resume. */ - if (cdev->pm_wake_source) + if (cdev->pm_wake_source) { + hrtimer_cancel(&cdev->hrtimer); m_can_write(cdev, M_CAN_IE, IR_RF0N); - else + } else { m_can_stop(ndev); + } m_can_clk_stop(cdev); } @@ -2462,6 +2479,13 @@ int m_can_class_resume(struct device *dev) return ret; if (cdev->pm_wake_source) { + /* Restore active interrupts but disable coalescing as + * we may have missed important waterlevel interrupts + * between suspend and resume. Timers are already + * stopped in suspend. Here we enable all interrupts + * again. + */ + cdev->active_interrupts |= IR_RF0N | IR_TEFN; m_can_write(cdev, M_CAN_IE, cdev->active_interrupts); } else { ret = m_can_start(ndev); diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c index 3b8736ff0345..ec5c64006a16 100644 --- a/drivers/net/can/spi/mcp251x.c +++ b/drivers/net/can/spi/mcp251x.c @@ -752,7 +752,7 @@ static int mcp251x_hw_wake(struct spi_device *spi) int ret; /* Force wakeup interrupt to wake device, but don't execute IST */ - disable_irq(spi->irq); + disable_irq_nosync(spi->irq); mcp251x_write_2regs(spi, CANINTE, CANINTE_WAKIE, CANINTF_WAKIF); /* Wait for oscillator startup timer after wake up */ diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-ram.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-ram.c index 9e8e82cdba46..61b0d6fa52dd 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-ram.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-ram.c @@ -97,7 +97,16 @@ void can_ram_get_layout(struct can_ram_layout *layout, if (ring) { u8 num_rx_coalesce = 0, num_tx_coalesce = 0; - num_rx = can_ram_rounddown_pow_of_two(config, &config->rx, 0, ring->rx_pending); + /* If the ring parameters have been configured in + * CAN-CC mode, but and we are in CAN-FD mode now, + * they might be to big. Use the default CAN-FD values + * in this case. + */ + num_rx = ring->rx_pending; + if (num_rx > layout->max_rx) + num_rx = layout->default_rx; + + num_rx = can_ram_rounddown_pow_of_two(config, &config->rx, 0, num_rx); /* The ethtool doc says: * To disable coalescing, set usecs = 0 and max_frames = 1. diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c index 7bd2bcb5cf87..83c18035b2a2 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c @@ -290,7 +290,7 @@ int mcp251xfd_ring_init(struct mcp251xfd_priv *priv) const struct mcp251xfd_rx_ring *rx_ring; u16 base = 0, ram_used; u8 fifo_nr = 1; - int i; + int err = 0, i; netdev_reset_queue(priv->ndev); @@ -386,10 +386,18 @@ int mcp251xfd_ring_init(struct mcp251xfd_priv *priv) netdev_err(priv->ndev, "Error during ring configuration, using more RAM (%u bytes) than available (%u bytes).\n", ram_used, MCP251XFD_RAM_SIZE); - return -ENOMEM; + err = -ENOMEM; } - return 0; + if (priv->tx_obj_num_coalesce_irq && + priv->tx_obj_num_coalesce_irq * 2 != priv->tx->obj_num) { + netdev_err(priv->ndev, + "Error during ring configuration, number of TEF coalescing buffers (%u) must be half of TEF buffers (%u).\n", + priv->tx_obj_num_coalesce_irq, priv->tx->obj_num); + err = -EINVAL; + } + + return err; } void mcp251xfd_ring_free(struct mcp251xfd_priv *priv) @@ -469,11 +477,25 @@ int mcp251xfd_ring_alloc(struct mcp251xfd_priv *priv) /* switching from CAN-2.0 to CAN-FD mode or vice versa */ if (fd_mode != test_bit(MCP251XFD_FLAGS_FD_MODE, priv->flags)) { + const struct ethtool_ringparam ring = { + .rx_pending = priv->rx_obj_num, + .tx_pending = priv->tx->obj_num, + }; + const struct ethtool_coalesce ec = { + .rx_coalesce_usecs_irq = priv->rx_coalesce_usecs_irq, + .rx_max_coalesced_frames_irq = priv->rx_obj_num_coalesce_irq, + .tx_coalesce_usecs_irq = priv->tx_coalesce_usecs_irq, + .tx_max_coalesced_frames_irq = priv->tx_obj_num_coalesce_irq, + }; struct can_ram_layout layout; - can_ram_get_layout(&layout, &mcp251xfd_ram_config, NULL, NULL, fd_mode); - priv->rx_obj_num = layout.default_rx; - tx_ring->obj_num = layout.default_tx; + can_ram_get_layout(&layout, &mcp251xfd_ram_config, &ring, &ec, fd_mode); + + priv->rx_obj_num = layout.cur_rx; + priv->rx_obj_num_coalesce_irq = layout.rx_coalesce; + + tx_ring->obj_num = layout.cur_tx; + priv->tx_obj_num_coalesce_irq = layout.tx_coalesce; } if (fd_mode) { diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index dfd6c00b4205..0a095cdea4fb 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -7413,6 +7413,7 @@ static void igc_io_resume(struct pci_dev *pdev) rtnl_lock(); if (netif_running(netdev)) { if (igc_open(netdev)) { + rtnl_unlock(); netdev_err(netdev, "igc_open failed after reset\n"); return; } diff --git a/drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c b/drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c index 51d9423b08a6..f2a5a36fdacd 100644 --- a/drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c +++ b/drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c @@ -1442,18 +1442,8 @@ static void vcap_api_encode_rule_test(struct kunit *test) vcap_enable_lookups(&test_vctrl, &test_netdev, 0, 0, rule->cookie, false); - vcap_free_rule(rule); - - /* Check that the rule has been freed: tricky to access since this - * memory should not be accessible anymore - */ - KUNIT_EXPECT_PTR_NE(test, NULL, rule); - ret = list_empty(&rule->keyfields); - KUNIT_EXPECT_EQ(test, true, ret); - ret = list_empty(&rule->actionfields); - KUNIT_EXPECT_EQ(test, true, ret); - - vcap_del_rule(&test_vctrl, &test_netdev, id); + ret = vcap_del_rule(&test_vctrl, &test_netdev, id); + KUNIT_EXPECT_EQ(test, 0, ret); } static void vcap_api_set_rule_counter_test(struct kunit *test) diff --git a/drivers/net/mctp/Kconfig b/drivers/net/mctp/Kconfig index ce9d2d2ccf3b..15860d6ac39f 100644 --- a/drivers/net/mctp/Kconfig +++ b/drivers/net/mctp/Kconfig @@ -21,6 +21,11 @@ config MCTP_SERIAL Say y here if you need to connect to MCTP endpoints over serial. To compile as a module, use m; the module will be called mctp-serial. +config MCTP_SERIAL_TEST + bool "MCTP serial tests" if !KUNIT_ALL_TESTS + depends on MCTP_SERIAL=y && KUNIT=y + default KUNIT_ALL_TESTS + config MCTP_TRANSPORT_I2C tristate "MCTP SMBus/I2C transport" # i2c-mux is optional, but we must build as a module if i2c-mux is a module diff --git a/drivers/net/mctp/mctp-serial.c b/drivers/net/mctp/mctp-serial.c index 5bf6fdff701c..f39bbe255497 100644 --- a/drivers/net/mctp/mctp-serial.c +++ b/drivers/net/mctp/mctp-serial.c @@ -91,8 +91,8 @@ static int next_chunk_len(struct mctp_serial *dev) * will be those non-escaped bytes, and does not include the escaped * byte. */ - for (i = 1; i + dev->txpos + 1 < dev->txlen; i++) { - if (needs_escape(dev->txbuf[dev->txpos + i + 1])) + for (i = 1; i + dev->txpos < dev->txlen; i++) { + if (needs_escape(dev->txbuf[dev->txpos + i])) break; } @@ -521,3 +521,112 @@ module_exit(mctp_serial_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Jeremy Kerr <[email protected]>"); MODULE_DESCRIPTION("MCTP Serial transport"); + +#if IS_ENABLED(CONFIG_MCTP_SERIAL_TEST) +#include <kunit/test.h> + +#define MAX_CHUNKS 6 +struct test_chunk_tx { + u8 input_len; + u8 input[MCTP_SERIAL_MTU]; + u8 chunks[MAX_CHUNKS]; +}; + +static void test_next_chunk_len(struct kunit *test) +{ + struct mctp_serial devx; + struct mctp_serial *dev = &devx; + int next; + + const struct test_chunk_tx *params = test->param_value; + + memset(dev, 0x0, sizeof(*dev)); + memcpy(dev->txbuf, params->input, params->input_len); + dev->txlen = params->input_len; + + for (size_t i = 0; i < MAX_CHUNKS; i++) { + next = next_chunk_len(dev); + dev->txpos += next; + KUNIT_EXPECT_EQ(test, next, params->chunks[i]); + + if (next == 0) { + KUNIT_EXPECT_EQ(test, dev->txpos, dev->txlen); + return; + } + } + + KUNIT_FAIL_AND_ABORT(test, "Ran out of chunks"); +} + +static struct test_chunk_tx chunk_tx_tests[] = { + { + .input_len = 5, + .input = { 0x00, 0x11, 0x22, 0x7e, 0x80 }, + .chunks = { 3, 1, 1, 0}, + }, + { + .input_len = 5, + .input = { 0x00, 0x11, 0x22, 0x7e, 0x7d }, + .chunks = { 3, 1, 1, 0}, + }, + { + .input_len = 3, + .input = { 0x7e, 0x11, 0x22, }, + .chunks = { 1, 2, 0}, + }, + { + .input_len = 3, + .input = { 0x7e, 0x7e, 0x7d, }, + .chunks = { 1, 1, 1, 0}, + }, + { + .input_len = 4, + .input = { 0x7e, 0x7e, 0x00, 0x7d, }, + .chunks = { 1, 1, 1, 1, 0}, + }, + { + .input_len = 6, + .input = { 0x7e, 0x7e, 0x00, 0x7d, 0x10, 0x10}, + .chunks = { 1, 1, 1, 1, 2, 0}, + }, + { + .input_len = 1, + .input = { 0x7e }, + .chunks = { 1, 0 }, + }, + { + .input_len = 1, + .input = { 0x80 }, + .chunks = { 1, 0 }, + }, + { + .input_len = 3, + .input = { 0x80, 0x80, 0x00 }, + .chunks = { 3, 0 }, + }, + { + .input_len = 7, + .input = { 0x01, 0x00, 0x08, 0xc8, 0x00, 0x80, 0x02 }, + .chunks = { 7, 0 }, + }, + { + .input_len = 7, + .input = { 0x01, 0x00, 0x08, 0xc8, 0x7e, 0x80, 0x02 }, + .chunks = { 4, 1, 2, 0 }, + }, +}; + +KUNIT_ARRAY_PARAM(chunk_tx, chunk_tx_tests, NULL); + +static struct kunit_case mctp_serial_test_cases[] = { + KUNIT_CASE_PARAM(test_next_chunk_len, chunk_tx_gen_params), +}; + +static struct kunit_suite mctp_serial_test_suite = { + .name = "mctp_serial", + .test_cases = mctp_serial_test_cases, +}; + +kunit_test_suite(mctp_serial_test_suite); + +#endif /* CONFIG_MCTP_SERIAL_TEST */ diff --git a/net/can/bcm.c b/net/can/bcm.c index 27d5fcf0eac9..46d3ec3aa44b 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1470,6 +1470,10 @@ static void bcm_notify(struct bcm_sock *bo, unsigned long msg, /* remove device reference, if this is our bound device */ if (bo->bound && bo->ifindex == dev->ifindex) { +#if IS_ENABLED(CONFIG_PROC_FS) + if (sock_net(sk)->can.bcmproc_dir && bo->bcm_proc_read) + remove_proc_entry(bo->procname, sock_net(sk)->can.bcmproc_dir); +#endif bo->bound = 0; bo->ifindex = 0; notify_enodev = 1; |