diff options
55 files changed, 2375 insertions, 518 deletions
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml new file mode 100644 index 000000000000..de9a465096db --- /dev/null +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM System Controller ICST Clocks + +maintainers: + - Linus Walleij <[email protected]> + +description: | + The ICS525 and ICS307 oscillators are produced by Integrated + Devices Technology (IDT). ARM integrated these oscillators deeply into their + reference designs by adding special control registers that manage such + oscillators to their system controllers. + + The various ARM system controllers contain logic to serialize and initialize + an ICST clock request after a write to the 32 bit register at an offset + into the system controller. Furthermore, to even be able to alter one of + these frequencies, the system controller must first be unlocked by + writing a special token to another offset in the system controller. + + Some ARM hardware contain special versions of the serial interface that only + connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to + different values and sometimes also hard-wires the output divider. They + therefore have special compatible strings as per this table (the OD value is + the value on the pins, not the resulting output divider). + + In the core modules and logic tiles, the ICST is a configurable clock fed + from a 24 MHz clock on the motherboard (usually the main crystal) used for + generating e.g. video clocks. It is located on the core module and there is + only one of these. This clock node must be a subnode of the core module. + + Hardware variant RDW OD VDW + + Integrator/AP 22 1 Bit 8 0, rest variable + integratorap-cm + + Integrator/AP 46 3 Bit 8 0, rest variable + integratorap-sys + + Integrator/AP 22 or 1 17 or (33 or 25 MHz) + integratorap-pci 14 1 14 + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-core + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-mem + + The ICST oscillator must be provided inside a system controller node. + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - arm,syscon-icst525 + - arm,syscon-icst307 + - arm,syscon-icst525-integratorap-cm + - arm,syscon-icst525-integratorap-sys + - arm,syscon-icst525-integratorap-pci + - arm,syscon-icst525-integratorcp-cm-core + - arm,syscon-icst525-integratorcp-cm-mem + - arm,integrator-cm-auxosc + - arm,versatile-cm-auxosc + - arm,impd-vco1 + - arm,impd-vco2 + + clocks: + description: Parent clock for the ICST VCO + maxItems: 1 + + clock-output-names: + maxItems: 1 + + lock-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the unlocking register for the oscillator + + vco-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the VCO register for the oscillator + +required: + - "#clock-cells" + - compatible + - clocks + +examples: + - | + vco1: clock@00 { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt deleted file mode 100644 index 11f5f95f571b..000000000000 --- a/Documentation/devicetree/bindings/clock/arm-integrator.txt +++ /dev/null @@ -1,34 +0,0 @@ -Clock bindings for ARM Integrator and Versatile Core Module clocks - -Auxiliary Oscillator Clock - -This is a configurable clock fed from a 24 MHz chrystal, -used for generating e.g. video clocks. It is located on the -core module and there is only one of these. - -This clock node *must* be a subnode of the core module, since -it obtains the base address for it's address range from its -parent node. - - -Required properties: -- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc" -- #clock-cells: must be <0> - -Optional properties: -- clocks: parent clock(s) - -Example: - -core-module@10000000 { - xtal24mhz: xtal24mhz@24M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - auxosc: cm_aux_osc@25M { - #clock-cells = <0>; - compatible = "arm,integrator-cm-auxosc"; - clocks = <&xtal24mhz>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt deleted file mode 100644 index 4cd81742038f..000000000000 --- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt +++ /dev/null @@ -1,70 +0,0 @@ -ARM System Controller ICST clocks - -The ICS525 and ICS307 oscillators are produced by Integrated Devices -Technology (IDT). ARM integrated these oscillators deeply into their -reference designs by adding special control registers that manage such -oscillators to their system controllers. - -The various ARM system controllers contain logic to serialize and initialize -an ICST clock request after a write to the 32 bit register at an offset -into the system controller. Furthermore, to even be able to alter one of -these frequencies, the system controller must first be unlocked by -writing a special token to another offset in the system controller. - -Some ARM hardware contain special versions of the serial interface that only -connects the low 8 bits of the VDW (missing one bit), hardwires RDW to -different values and sometimes also hardwire the output divider. They -therefore have special compatible strings as per this table (the OD value is -the value on the pins, not the resulting output divider): - -Hardware variant: RDW OD VDW - -Integrator/AP 22 1 Bit 8 0, rest variable -integratorap-cm - -Integrator/AP 46 3 Bit 8 0, rest variable -integratorap-sys - -Integrator/AP 22 or 1 17 or (33 or 25 MHz) -integratorap-pci 14 1 14 - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-core - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-mem - -The ICST oscillator must be provided inside a system controller node. - -Required properties: -- compatible: must be one of - "arm,syscon-icst525" - "arm,syscon-icst307" - "arm,syscon-icst525-integratorap-cm" - "arm,syscon-icst525-integratorap-sys" - "arm,syscon-icst525-integratorap-pci" - "arm,syscon-icst525-integratorcp-cm-core" - "arm,syscon-icst525-integratorcp-cm-mem" -- lock-offset: the offset address into the system controller where the - unlocking register is located -- vco-offset: the offset address into the system controller where the - ICST control register is located (even 32 bit address) -- #clock-cells: must be <0> -- clocks: parent clock, since the ICST needs a parent clock to derive its - frequency from, this attribute is compulsory. - -Example: - -syscon: syscon@10000000 { - compatible = "syscon"; - reg = <0x10000000 0x1000>; - - oscclk0: osc0@c { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x0c>; - clocks = <&xtal24mhz>; - }; - (...) -}; diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml new file mode 100644 index 000000000000..e2b6ac96bbcb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 and MMP3 Clock Controller + +maintainers: + - Lubomir Rintel <[email protected]> + +description: | + The clock subsystem on MMP2 or MMP3 generates and supplies clock to various + controllers within the SoC. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. + +properties: + compatible: + enum: + - marvell,mmp2-clock # controller compatible with MMP2 SoC + - marvell,mmp3-clock # controller compatible with MMP3 SoC + + reg: + items: + - description: MPMU register region + - description: APMU register region + - description: APBC register region + + reg-names: + items: + - const: mpmu + - const: apmu + - const: apbc + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt deleted file mode 100644 index 23b52dc02266..000000000000 --- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Marvell MMP2 Clock Controller - -The MMP2 clock subsystem generates and supplies clock to various -controllers within the MMP2 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "marvell,mmp2-clock" - controller compatible with MMP2 SoC. - -- reg: physical base address of the clock subsystem and length of memory mapped - region. There are 3 places in SOC has clock control logic: - "mpmu", "apmu", "apbc". So three reg spaces need to be defined. - -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt deleted file mode 100644 index f4d153f24a0f..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ /dev/null @@ -1,100 +0,0 @@ -* Renesas Clock Pulse Generator / Module Standby and Software Reset - -On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) -and MSSR (Module Standby and Software Reset) blocks are intimately connected, -and share the same register block. - -They provide the following functionalities: - - The CPG block generates various core clocks, - - The MSSR block provides two functions: - 1. Module Standby, providing a Clock Domain to control the clock supply - to individual SoC devices, - 2. Reset Control, to perform a software reset of individual SoC devices. - -Required Properties: - - compatible: Must be one of: - - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2) - - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M) - - "renesas,r8a7744-cpg-mssr" for the r8a7744 SoC (RZ/G1N) - - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) - - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C) - - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M) - - "renesas,r8a774b1-cpg-mssr" for the r8a774b1 SoC (RZ/G2N) - - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E) - - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2) - - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W) - - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H) - - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N) - - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - - "renesas,r8a7796-cpg-mssr" for the r8a77960 SoC (R-Car M3-W) - - "renesas,r8a77961-cpg-mssr" for the r8a77961 SoC (R-Car M3-W+) - - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N) - - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H) - - "renesas,r8a77990-cpg-mssr" for the r8a77990 SoC (R-Car E3) - - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - - - reg: Base address and length of the memory resource used by the CPG/MSSR - block - - - clocks: References to external parent clocks, one entry for each entry in - clock-names - - clock-names: List of external parent clock names. Valid names are: - - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1, - r8a774b1, r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793, - r8a7794, r8a7795, r8a77960, r8a77961, r8a77965, r8a77970, - r8a77980, r8a77990, r8a77995) - - "extalr" (r8a774a1, r8a774b1, r8a7795, r8a77960, r8a77961, r8a77965, - r8a77970, r8a77980) - - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791, - r8a7793, r8a7794) - - - #clock-cells: Must be 2 - - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" - and a core clock reference, as defined in - <dt-bindings/clock/*-cpg-mssr.h>. - - For module clocks, the two clock specifier cells must be "CPG_MOD" and - a module number, as defined in the datasheet. - - - #power-domain-cells: Must be 0 - - SoC devices that are part of the CPG/MSSR Clock Domain and can be - power-managed through Module Standby should refer to the CPG device - node in their "power-domains" property, as documented by the generic PM - Domain bindings in - Documentation/devicetree/bindings/power/power-domain.yaml. - - - #reset-cells: Must be 1 - - The single reset specifier cell must be the module number, as defined - in the datasheet. - - -Examples --------- - - - CPG device node: - - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7795-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&extalr_clk>; - clock-names = "extal", "extalr"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; - - - - CPG/MSSR Clock Domain member device node: - - scif2: serial@e6e88000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; - reg = <0 0xe6e88000 0 64>; - interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "fck"; - dmas = <&dmac1 0x13>, <&dmac1 0x12>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - resets = <&cpg 310>; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml new file mode 100644 index 000000000000..9cd102e5fed5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Clock Pulse Generator / Module Standby and Software Reset + +maintainers: + - Geert Uytterhoeven <[email protected]> + +description: | + On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) + and MSSR (Module Standby and Software Reset) blocks are intimately connected, + and share the same register block. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The MSSR block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + enum: + - renesas,r7s9210-cpg-mssr # RZ/A2 + - renesas,r8a7743-cpg-mssr # RZ/G1M + - renesas,r8a7744-cpg-mssr # RZ/G1N + - renesas,r8a7745-cpg-mssr # RZ/G1E + - renesas,r8a77470-cpg-mssr # RZ/G1C + - renesas,r8a774a1-cpg-mssr # RZ/G2M + - renesas,r8a774b1-cpg-mssr # RZ/G2N + - renesas,r8a774c0-cpg-mssr # RZ/G2E + - renesas,r8a7790-cpg-mssr # R-Car H2 + - renesas,r8a7791-cpg-mssr # R-Car M2-W + - renesas,r8a7792-cpg-mssr # R-Car V2H + - renesas,r8a7793-cpg-mssr # R-Car M2-N + - renesas,r8a7794-cpg-mssr # R-Car E2 + - renesas,r8a7795-cpg-mssr # R-Car H3 + - renesas,r8a7796-cpg-mssr # R-Car M3-W + - renesas,r8a77961-cpg-mssr # R-Car M3-W+ + - renesas,r8a77965-cpg-mssr # R-Car M3-N + - renesas,r8a77970-cpg-mssr # R-Car V3M + - renesas,r8a77980-cpg-mssr # R-Car V3H + - renesas,r8a77990-cpg-mssr # R-Car E3 + - renesas,r8a77995-cpg-mssr # R-Car D3 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: + - extal # All + - extalr # Most R-Car Gen3 and RZ/G2 + - usb_extal # Most R-Car Gen2 and RZ/G1 + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/*-cpg-mssr.h> + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the datasheet. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/MSSR Clock Domain and can be + power-managed through Module Standby should refer to the CPG device node + in their "power-domains" property, as documented by the generic PM Domain + bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + the datasheet. + const: 1 + +if: + not: + properties: + compatible: + items: + enum: + - renesas,r7s9210-cpg-mssr +then: + required: + - '#reset-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7795-cpg-mssr"; + reg = <0xe6150000 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt index 83f6c6a7c41c..4bf6f53bd95e 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt @@ -38,10 +38,17 @@ Required properties: - reg: offset and length of the USB 2.0 clock selector register block. - clocks: A list of phandles and specifier pairs. - clock-names: Name of the clocks. - - The functional clock must be "ehci_ohci" + - The functional clock of USB 2.0 host side must be "ehci_ohci" + - The functional clock of HS-USB side must be "hs-usb-if" - The USB_EXTAL clock pin must be "usb_extal" - The USB_XTAL clock pin must be "usb_xtal" - #clock-cells: Must be 0 +- power-domains: A phandle and symbolic PM domain specifier. + See power/renesas,rcar-sysc.yaml. +- resets: A list of phandles and specifier pairs. +- reset-names: Name of the resets. + - The reset of USB 2.0 host side must be "ehci_ohci" + - The reset of HS-USB side must be "hs-usb-if" Example (R-Car H3): @@ -49,7 +56,11 @@ Example (R-Car H3): compatible = "renesas,r8a7795-rcar-usb2-clock-sel", "renesas,rcar-gen3-usb2-clock-sel"; reg = <0 0xe6590630 0 0x02>; - clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>; - clock-names = "ehci_ohci", "usb_extal", "usb_xtal"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal>, <&usb_xtal>; + clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; #clock-cells = <0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; }; diff --git a/MAINTAINERS b/MAINTAINERS index 38fe2f3f7b6f..04499e55218b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1280,7 +1280,7 @@ L: [email protected] (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/arm/arm-boards F: Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt -F: Documentation/devicetree/bindings/clock/arm-integrator.txt +F: Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml F: Documentation/devicetree/bindings/i2c/i2c-versatile.txt F: Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt F: Documentation/devicetree/bindings/mtd/arm-versatile.txt diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile index 3732241352ce..8b90357f2a93 100644 --- a/drivers/clk/at91/Makefile +++ b/drivers/clk/at91/Makefile @@ -15,7 +15,11 @@ obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o +obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o +obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c new file mode 100644 index 000000000000..c44a431b6c97 --- /dev/null +++ b/drivers/clk/at91/at91rm9200.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/clk-provider.h> +#include <linux/mfd/syscon.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/at91.h> + +#include "pmc.h" + +struct sck { + char *n; + char *p; + u8 id; +}; + +struct pck { + char *n; + u8 id; +}; + +static const struct clk_master_characteristics rm9200_mck_characteristics = { + .output = { .min = 0, .max = 80000000 }, + .divisors = { 1, 2, 3, 4 }, +}; + +static u8 rm9200_pll_out[] = { 0, 2 }; + +static const struct clk_range rm9200_pll_outputs[] = { + { .min = 80000000, .max = 160000000 }, + { .min = 150000000, .max = 180000000 }, +}; + +static const struct clk_pll_characteristics rm9200_pll_characteristics = { + .input = { .min = 1000000, .max = 32000000 }, + .num_output = ARRAY_SIZE(rm9200_pll_outputs), + .output = rm9200_pll_outputs, + .out = rm9200_pll_out, +}; + +static const struct sck at91rm9200_systemck[] = { + { .n = "udpck", .p = "usbck", .id = 2 }, + { .n = "uhpck", .p = "usbck", .id = 4 }, + { .n = "pck0", .p = "prog0", .id = 8 }, + { .n = "pck1", .p = "prog1", .id = 9 }, + { .n = "pck2", .p = "prog2", .id = 10 }, + { .n = "pck3", .p = "prog3", .id = 11 }, +}; + +static const struct pck at91rm9200_periphck[] = { + { .n = "pioA_clk", .id = 2 }, + { .n = "pioB_clk", .id = 3 }, + { .n = "pioC_clk", .id = 4 }, + { .n = "pioD_clk", .id = 5 }, + { .n = "usart0_clk", .id = 6 }, + { .n = "usart1_clk", .id = 7 }, + { .n = "usart2_clk", .id = 8 }, + { .n = "usart3_clk", .id = 9 }, + { .n = "mci0_clk", .id = 10 }, + { .n = "udc_clk", .id = 11 }, + { .n = "twi0_clk", .id = 12 }, + { .n = "spi0_clk", .id = 13 }, + { .n = "ssc0_clk", .id = 14 }, + { .n = "ssc1_clk", .id = 15 }, + { .n = "ssc2_clk", .id = 16 }, + { .n = "tc0_clk", .id = 17 }, + { .n = "tc1_clk", .id = 18 }, + { .n = "tc2_clk", .id = 19 }, + { .n = "tc3_clk", .id = 20 }, + { .n = "tc4_clk", .id = 21 }, + { .n = "tc5_clk", .id = 22 }, + { .n = "ohci_clk", .id = 23 }, + { .n = "macb0_clk", .id = 24 }, +}; + +static void __init at91rm9200_pmc_setup(struct device_node *np) +{ + const char *slowxtal_name, *mainxtal_name; + struct pmc_data *at91rm9200_pmc; + u32 usb_div[] = { 1, 2, 0, 0 }; + const char *parent_names[6]; + struct regmap *regmap; + struct clk_hw *hw; + int i; + bool bypass; + + i = of_property_match_string(np, "clock-names", "slow_xtal"); + if (i < 0) + return; + + slowxtal_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "main_xtal"); + if (i < 0) + return; + mainxtal_name = of_clk_get_parent_name(np, i); + + regmap = device_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + at91rm9200_pmc = pmc_data_allocate(PMC_MAIN + 1, + nck(at91rm9200_systemck), + nck(at91rm9200_periphck), 0); + if (!at91rm9200_pmc) + return; + + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, + bypass); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_rm9200_main(regmap, "mainck", "main_osc"); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->chws[PMC_MAIN] = hw; + + hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0, + &at91rm9200_pll_layout, + &rm9200_pll_characteristics); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_pll(regmap, "pllbck", "mainck", 1, + &at91rm9200_pll_layout, + &rm9200_pll_characteristics); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = slowxtal_name; + parent_names[1] = "mainck"; + parent_names[2] = "pllack"; + parent_names[3] = "pllbck"; + hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, + &at91rm9200_master_layout, + &rm9200_mck_characteristics); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->chws[PMC_MCK] = hw; + + hw = at91rm9200_clk_register_usb(regmap, "usbck", "pllbck", usb_div); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = slowxtal_name; + parent_names[1] = "mainck"; + parent_names[2] = "pllack"; + parent_names[3] = "pllbck"; + for (i = 0; i < 4; i++) { + char name[6]; + + snprintf(name, sizeof(name), "prog%d", i); + + hw = at91_clk_register_programmable(regmap, name, + parent_names, 4, i, + &at91rm9200_programmable_layout); + if (IS_ERR(hw)) + goto err_free; + } + + for (i = 0; i < ARRAY_SIZE(at91rm9200_systemck); i++) { + hw = at91_clk_register_system(regmap, at91rm9200_systemck[i].n, + at91rm9200_systemck[i].p, + at91rm9200_systemck[i].id); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->shws[at91rm9200_systemck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(at91rm9200_periphck); i++) { + hw = at91_clk_register_peripheral(regmap, + at91rm9200_periphck[i].n, + "masterck", + at91rm9200_periphck[i].id); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->phws[at91rm9200_periphck[i].id] = hw; + } + + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91rm9200_pmc); + + return; + +err_free: + pmc_data_free(at91rm9200_pmc); +} +/* + * While the TCB can be used as the clocksource, the system timer is most likely + * to be used instead. However, the pinctrl driver doesn't support probe + * deferring properly. Once this is fixed, this can be switched to a platform + * driver. + */ +CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc", + at91rm9200_pmc_setup); diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c new file mode 100644 index 000000000000..38a7d2d2df0c --- /dev/null +++ b/drivers/clk/at91/at91sam9g45.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/clk-provider.h> +#include <linux/mfd/syscon.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/at91.h> + +#include "pmc.h" + +static const struct clk_master_characteristics mck_characteristics = { + .output = { .min = 0, .max = 133333333 }, + .divisors = { 1, 2, 4, 3 }, +}; + +static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 }; + +static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 }; + +static const struct clk_range plla_outputs[] = { + { .min = 745000000, .max = 800000000 }, + { .min = 695000000, .max = 750000000 }, + { .min = 645000000, .max = 700000000 }, + { .min = 595000000, .max = 650000000 }, + { .min = 545000000, .max = 600000000 }, + { .min = 495000000, .max = 555000000 }, + { .min = 445000000, .max = 500000000 }, + { .min = 400000000, .max = 450000000 }, +}; + +static const struct clk_pll_characteristics plla_characteristics = { + .input = { .min = 2000000, .max = 32000000 }, + .num_output = ARRAY_SIZE(plla_outputs), + .output = plla_outputs, + .icpll = plla_icpll, + .out = plla_out, +}; + +static const struct { + char *n; + char *p; + u8 id; +} at91sam9g45_systemck[] = { + { .n = "ddrck", .p = "masterck", .id = 2 }, + { .n = "uhpck", .p = "usbck", .id = 6 }, + { .n = "pck0", .p = "prog0", .id = 8 }, + { .n = "pck1", .p = "prog1", .id = 9 }, +}; + +static const struct clk_pcr_layout at91sam9g45_pcr_layout = { + .offset = 0x10c, + .cmd = BIT(12), + .pid_mask = GENMASK(5, 0), + .div_mask = GENMASK(17, 16), +}; + +struct pck { + char *n; + u8 id; +}; + +static const struct pck at91sam9g45_periphck[] = { + { .n = "pioA_clk", .id = 2, }, + { .n = "pioB_clk", .id = 3, }, + { .n = "pioC_clk", .id = 4, }, + { .n = "pioDE_clk", .id = 5, }, + { .n = "trng_clk", .id = 6, }, + { .n = "usart0_clk", .id = 7, }, + { .n = "usart1_clk", .id = 8, }, + { .n = "usart2_clk", .id = 9, }, + { .n = "usart3_clk", .id = 10, }, + { .n = "mci0_clk", .id = 11, }, + { .n = "twi0_clk", .id = 12, }, + { .n = "twi1_clk", .id = 13, }, + { .n = "spi0_clk", .id = 14, }, + { .n = "spi1_clk", .id = 15, }, + { .n = "ssc0_clk", .id = 16, }, + { .n = "ssc1_clk", .id = 17, }, + { .n = "tcb0_clk", .id = 18, }, + { .n = "pwm_clk", .id = 19, }, + { .n = "adc_clk", .id = 20, }, + { .n = "dma0_clk", .id = 21, }, + { .n = "uhphs_clk", .id = 22, }, + { .n = "lcd_clk", .id = 23, }, + { .n = "ac97_clk", .id = 24, }, + { .n = "macb0_clk", .id = 25, }, + { .n = "isi_clk", .id = 26, }, + { .n = "udphs_clk", .id = 27, }, + { .n = "aestdessha_clk", .id = 28, }, + { .n = "mci1_clk", .id = 29, }, + { .n = "vdec_clk", .id = 30, }, +}; + +static void __init at91sam9g45_pmc_setup(struct device_node *np) +{ + const char *slck_name, *mainxtal_name; + struct pmc_data *at91sam9g45_pmc; + const char *parent_names[6]; + struct regmap *regmap; + struct clk_hw *hw; + int i; + bool bypass; + + i = of_property_match_string(np, "clock-names", "slow_clk"); + if (i < 0) + return; + + slck_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "main_xtal"); + if (i < 0) + return; + mainxtal_name = of_clk_get_parent_name(np, i); + + regmap = syscon_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + at91sam9g45_pmc = pmc_data_allocate(PMC_MAIN + 1, + nck(at91sam9g45_systemck), + nck(at91sam9g45_periphck), 0); + if (!at91sam9g45_pmc) + return; + + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, + bypass); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_rm9200_main(regmap, "mainck", "main_osc"); + if (IS_ERR(hw)) + goto err_free; + + at91sam9g45_pmc->chws[PMC_MAIN] = hw; + + hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0, + &at91rm9200_pll_layout, &plla_characteristics); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack"); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck"); + if (IS_ERR(hw)) + goto err_free; + + at91sam9g45_pmc->chws[PMC_UTMI] = hw; + + parent_names[0] = slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "plladivck"; + parent_names[3] = "utmick"; + hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, + &at91rm9200_master_layout, + &mck_characteristics); + if (IS_ERR(hw)) + goto err_free; + + at91sam9g45_pmc->chws[PMC_MCK] = hw; + + parent_names[0] = "plladivck"; + parent_names[1] = "utmick"; + hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "plladivck"; + parent_names[3] = "utmick"; + parent_names[4] = "masterck"; + for (i = 0; i < 2; i++) { + char name[6]; + + snprintf(name, sizeof(name), "prog%d", i); + + hw = at91_clk_register_programmable(regmap, name, + parent_names, 5, i, + &at91sam9g45_programmable_layout); + if (IS_ERR(hw)) + goto err_free; + } + + for (i = 0; i < ARRAY_SIZE(at91sam9g45_systemck); i++) { + hw = at91_clk_register_system(regmap, at91sam9g45_systemck[i].n, + at91sam9g45_systemck[i].p, + at91sam9g45_systemck[i].id); + if (IS_ERR(hw)) + goto err_free; + + at91sam9g45_pmc->shws[at91sam9g45_systemck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(at91sam9g45_periphck); i++) { + hw = at91_clk_register_peripheral(regmap, + at91sam9g45_periphck[i].n, + "masterck", + at91sam9g45_periphck[i].id); + if (IS_ERR(hw)) + goto err_free; + + at91sam9g45_pmc->phws[at91sam9g45_periphck[i].id] = hw; + } + + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9g45_pmc); + + return; + +err_free: + pmc_data_free(at91sam9g45_pmc); +} +/* + * The TCB is used as the clocksource so its clock is needed early. This means + * this can't be a platform driver. + */ +CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", + at91sam9g45_pmc_setup); diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c new file mode 100644 index 000000000000..8bb39d2ba84b --- /dev/null +++ b/drivers/clk/at91/at91sam9n12.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/clk-provider.h> +#include <linux/mfd/syscon.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/at91.h> + +#include "pmc.h" + +static const struct clk_master_characteristics mck_characteristics = { + .output = { .min = 0, .max = 133333333 }, + .divisors = { 1, 2, 4, 3 }, + .have_div3_pres = 1, +}; + +static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 }; + +static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 }; + +static const struct clk_range plla_outputs[] = { + { .min = 745000000, .max = 800000000 }, + { .min = 695000000, .max = 750000000 }, + { .min = 645000000, .max = 700000000 }, + { .min = 595000000, .max = 650000000 }, + { .min = 545000000, .max = 600000000 }, + { .min = 495000000, .max = 555000000 }, + { .min = 445000000, .max = 500000000 }, + { .min = 400000000, .max = 450000000 }, +}; + +static const struct clk_pll_characteristics plla_characteristics = { + .input = { .min = 2000000, .max = 32000000 }, + .num_output = ARRAY_SIZE(plla_outputs), + .output = plla_outputs, + .icpll = plla_icpll, + .out = plla_out, +}; + +static u8 pllb_out[] = { 0 }; + +static const struct clk_range pllb_outputs[] = { + { .min = 30000000, .max = 100000000 }, +}; + +static const struct clk_pll_characteristics pllb_characteristics = { + .input = { .min = 2000000, .max = 32000000 }, + .num_output = ARRAY_SIZE(pllb_outputs), + .output = pllb_outputs, + .out = pllb_out, +}; + +static const struct { + char *n; + char *p; + u8 id; +} at91sam9n12_systemck[] = { + { .n = "ddrck", .p = "masterck", .id = 2 }, + { .n = "lcdck", .p = "masterck", .id = 3 }, + { .n = "uhpck", .p = "usbck", .id = 6 }, + { .n = "udpck", .p = "usbck", .id = 7 }, + { .n = "pck0", .p = "prog0", .id = 8 }, + { .n = "pck1", .p = "prog1", .id = 9 }, +}; + +static const struct clk_pcr_layout at91sam9n12_pcr_layout = { + .offset = 0x10c, + .cmd = BIT(12), + .pid_mask = GENMASK(5, 0), + .div_mask = GENMASK(17, 16), +}; + +struct pck { + char *n; + u8 id; +}; + +static const struct pck at91sam9n12_periphck[] = { + { .n = "pioAB_clk", .id = 2, }, + { .n = "pioCD_clk", .id = 3, }, + { .n = "fuse_clk", .id = 4, }, + { .n = "usart0_clk", .id = 5, }, + { .n = "usart1_clk", .id = 6, }, + { .n = "usart2_clk", .id = 7, }, + { .n = "usart3_clk", .id = 8, }, + { .n = "twi0_clk", .id = 9, }, + { .n = "twi1_clk", .id = 10, }, + { .n = "mci0_clk", .id = 12, }, + { .n = "spi0_clk", .id = 13, }, + { .n = "spi1_clk", .id = 14, }, + { .n = "uart0_clk", .id = 15, }, + { .n = "uart1_clk", .id = 16, }, + { .n = "tcb_clk", .id = 17, }, + { .n = "pwm_clk", .id = 18, }, + { .n = "adc_clk", .id = 19, }, + { .n = "dma0_clk", .id = 20, }, + { .n = "uhphs_clk", .id = 22, }, + { .n = "udphs_clk", .id = 23, }, + { .n = "lcdc_clk", .id = 25, }, + { .n = "sha_clk", .id = 27, }, + { .n = "ssc0_clk", .id = 28, }, + { .n = "aes_clk", .id = 29, }, + { .n = "trng_clk", .id = 30, }, +}; + +static void __init at91sam9n12_pmc_setup(struct device_node *np) +{ + struct clk_range range = CLK_RANGE(0, 0); + const char *slck_name, *mainxtal_name; + struct pmc_data *at91sam9n12_pmc; + const char *parent_names[6]; + struct regmap *regmap; + struct clk_hw *hw; + int i; + bool bypass; + + i = of_property_match_string(np, "clock-names", "slow_clk"); + if (i < 0) + return; + + slck_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "main_xtal"); + if (i < 0) + return; + mainxtal_name = of_clk_get_parent_name(np, i); + + regmap = syscon_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + at91sam9n12_pmc = pmc_data_allocate(PMC_MAIN + 1, + nck(at91sam9n12_systemck), 31, 0); + if (!at91sam9n12_pmc) + return; + + hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000, + 50000000); + if (IS_ERR(hw)) + goto err_free; + + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, + bypass); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = "main_rc_osc"; + parent_names[1] = "main_osc"; + hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2); + if (IS_ERR(hw)) + goto err_free; + + at91sam9n12_pmc->chws[PMC_MAIN] = hw; + + hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0, + &at91rm9200_pll_layout, &plla_characteristics); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack"); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_pll(regmap, "pllbck", "mainck", 1, + &at91rm9200_pll_layout, &pllb_characteristics); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "plladivck"; + parent_names[3] = "pllbck"; + hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, + &at91sam9x5_master_layout, + &mck_characteristics); + if (IS_ERR(hw)) + goto err_free; + + at91sam9n12_pmc->chws[PMC_MCK] = hw; + + hw = at91sam9n12_clk_register_usb(regmap, "usbck", "pllbck"); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "plladivck"; + parent_names[3] = "pllbck"; + parent_names[4] = "masterck"; + for (i = 0; i < 2; i++) { + char name[6]; + + snprintf(name, sizeof(name), "prog%d", i); + + hw = at91_clk_register_programmable(regmap, name, + parent_names, 5, i, + &at91sam9x5_programmable_layout); + if (IS_ERR(hw)) + goto err_free; + } + + for (i = 0; i < ARRAY_SIZE(at91sam9n12_systemck); i++) { + hw = at91_clk_register_system(regmap, at91sam9n12_systemck[i].n, + at91sam9n12_systemck[i].p, + at91sam9n12_systemck[i].id); + if (IS_ERR(hw)) + goto err_free; + + at91sam9n12_pmc->shws[at91sam9n12_systemck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(at91sam9n12_periphck); i++) { + hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &at91sam9n12_pcr_layout, + at91sam9n12_periphck[i].n, + "masterck", + at91sam9n12_periphck[i].id, + &range); + if (IS_ERR(hw)) + goto err_free; + + at91sam9n12_pmc->phws[at91sam9n12_periphck[i].id] = hw; + } + + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9n12_pmc); + + return; + +err_free: + pmc_data_free(at91sam9n12_pmc); +} +/* + * The TCB is used as the clocksource so its clock is needed early. This means + * this can't be a platform driver. + */ +CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", + at91sam9n12_pmc_setup); diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 22aede42a336..31d5c45e30d7 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -25,6 +25,7 @@ struct at91sam9x5_clk_usb { struct clk_hw hw; struct regmap *regmap; u32 usbs_mask; + u8 num_parents; }; #define to_at91sam9x5_clk_usb(hw) \ @@ -75,6 +76,9 @@ static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw, tmp_parent_rate = req->rate * div; tmp_parent_rate = clk_hw_round_rate(parent, tmp_parent_rate); + if (!tmp_parent_rate) + continue; + tmp_rate = DIV_ROUND_CLOSEST(tmp_parent_rate, div); if (tmp_rate < req->rate) tmp_diff = req->rate - tmp_rate; @@ -107,7 +111,7 @@ static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index) { struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw); - if (index > 1) + if (index >= usb->num_parents) return -EINVAL; regmap_update_bits(usb->regmap, AT91_PMC_USB, usb->usbs_mask, index); @@ -211,7 +215,8 @@ _at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name, usb->hw.init = &init; usb->regmap = regmap; - usb->usbs_mask = SAM9X5_USBS_MASK; + usb->usbs_mask = usbs_mask; + usb->num_parents = num_parents; hw = &usb->hw; ret = clk_hw_register(NULL, &usb->hw); diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c index 77398aefeb6d..cc19e8fb83be 100644 --- a/drivers/clk/at91/sam9x60.c +++ b/drivers/clk/at91/sam9x60.c @@ -124,7 +124,6 @@ static const struct { char *n; u8 id; struct clk_range r; - bool pll; } sam9x60_gck[] = { { .n = "flex0_gclk", .id = 5, }, { .n = "flex1_gclk", .id = 6, }, @@ -144,11 +143,9 @@ static const struct { { .n = "sdmmc1_gclk", .id = 26, .r = { .min = 0, .max = 105000000 }, }, { .n = "flex11_gclk", .id = 32, }, { .n = "flex12_gclk", .id = 33, }, - { .n = "i2s_gclk", .id = 34, .r = { .min = 0, .max = 105000000 }, - .pll = true, }, + { .n = "i2s_gclk", .id = 34, .r = { .min = 0, .max = 105000000 }, }, { .n = "pit64b_gclk", .id = 37, }, - { .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 }, - .pll = true, }, + { .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 }, }, { .n = "tcb1_gclk", .id = 45, }, { .n = "dbgu_gclk", .id = 47, }, }; @@ -237,9 +234,8 @@ static void __init sam9x60_pmc_setup(struct device_node *np) parent_names[0] = "pllack"; parent_names[1] = "upllck"; - parent_names[2] = "mainck"; - parent_names[3] = "mainck"; - hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 4); + parent_names[2] = "main_osc"; + hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 3); if (IS_ERR(hw)) goto err_free; @@ -290,7 +286,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np) sam9x60_gck[i].n, parent_names, 6, sam9x60_gck[i].id, - sam9x60_gck[i].pll, + false, &sam9x60_gck[i].r); if (IS_ERR(hw)) goto err_free; diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c new file mode 100644 index 000000000000..88506f909c08 --- /dev/null +++ b/drivers/clk/at91/sama5d3.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/clk-provider.h> +#include <linux/mfd/syscon.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/at91.h> + +#include "pmc.h" + +static const struct clk_master_characteristics mck_characteristics = { + .output = { .min = 0, .max = 166000000 }, + .divisors = { 1, 2, 4, 3 }, +}; + +static u8 plla_out[] = { 0 }; + +static u16 plla_icpll[] = { 0 }; + +static const struct clk_range plla_outputs[] = { + { .min = 400000000, .max = 1000000000 }, +}; + +static const struct clk_pll_characteristics plla_characteristics = { + .input = { .min = 8000000, .max = 50000000 }, + .num_output = ARRAY_SIZE(plla_outputs), + .output = plla_outputs, + .icpll = plla_icpll, + .out = plla_out, +}; + +static const struct clk_pcr_layout sama5d3_pcr_layout = { + .offset = 0x10c, + .cmd = BIT(12), + .pid_mask = GENMASK(6, 0), + .div_mask = GENMASK(17, 16), +}; + +static const struct { + char *n; + char *p; + u8 id; +} sama5d3_systemck[] = { + { .n = "ddrck", .p = "masterck", .id = 2 }, + { .n = "lcdck", .p = "masterck", .id = 3 }, + { .n = "smdck", .p = "smdclk", .id = 4 }, + { .n = "uhpck", .p = "usbck", .id = 6 }, + { .n = "udpck", .p = "usbck", .id = 7 }, + { .n = "pck0", .p = "prog0", .id = 8 }, + { .n = "pck1", .p = "prog1", .id = 9 }, + { .n = "pck2", .p = "prog2", .id = 10 }, +}; + +static const struct { + char *n; + u8 id; + struct clk_range r; +} sama5d3_periphck[] = { + { .n = "dbgu_clk", .id = 2, }, + { .n = "hsmc_clk", .id = 5, }, + { .n = "pioA_clk", .id = 6, }, + { .n = "pioB_clk", .id = 7, }, + { .n = "pioC_clk", .id = 8, }, + { .n = "pioD_clk", .id = 9, }, + { .n = "pioE_clk", .id = 10, }, + { .n = "usart0_clk", .id = 12, .r = { .min = 0, .max = 83000000 }, }, + { .n = "usart1_clk", .id = 13, .r = { .min = 0, .max = 83000000 }, }, + { .n = "usart2_clk", .id = 14, .r = { .min = 0, .max = 83000000 }, }, + { .n = "usart3_clk", .id = 15, .r = { .min = 0, .max = 83000000 }, }, + { .n = "uart0_clk", .id = 16, .r = { .min = 0, .max = 83000000 }, }, + { .n = "uart1_clk", .id = 17, .r = { .min = 0, .max = 83000000 }, }, + { .n = "twi0_clk", .id = 18, .r = { .min = 0, .max = 41500000 }, }, + { .n = "twi1_clk", .id = 19, .r = { .min = 0, .max = 41500000 }, }, + { .n = "twi2_clk", .id = 20, .r = { .min = 0, .max = 41500000 }, }, + { .n = "mci0_clk", .id = 21, }, + { .n = "mci1_clk", .id = 22, }, + { .n = "mci2_clk", .id = 23, }, + { .n = "spi0_clk", .id = 24, .r = { .min = 0, .max = 166000000 }, }, + { .n = "spi1_clk", .id = 25, .r = { .min = 0, .max = 166000000 }, }, + { .n = "tcb0_clk", .id = 26, .r = { .min = 0, .max = 166000000 }, }, + { .n = "tcb1_clk", .id = 27, .r = { .min = 0, .max = 166000000 }, }, + { .n = "pwm_clk", .id = 28, }, + { .n = "adc_clk", .id = 29, .r = { .min = 0, .max = 83000000 }, }, + { .n = "dma0_clk", .id = 30, }, + { .n = "dma1_clk", .id = 31, }, + { .n = "uhphs_clk", .id = 32, }, + { .n = "udphs_clk", .id = 33, }, + { .n = "macb0_clk", .id = 34, }, + { .n = "macb1_clk", .id = 35, }, + { .n = "lcdc_clk", .id = 36, }, + { .n = "isi_clk", .id = 37, }, + { .n = "ssc0_clk", .id = 38, .r = { .min = 0, .max = 83000000 }, }, + { .n = "ssc1_clk", .id = 39, .r = { .min = 0, .max = 83000000 }, }, + { .n = "can0_clk", .id = 40, .r = { .min = 0, .max = 83000000 }, }, + { .n = "can1_clk", .id = 41, .r = { .min = 0, .max = 83000000 }, }, + { .n = "sha_clk", .id = 42, }, + { .n = "aes_clk", .id = 43, }, + { .n = "tdes_clk", .id = 44, }, + { .n = "trng_clk", .id = 45, }, + { .n = "fuse_clk", .id = 48, }, + { .n = "mpddr_clk", .id = 49, }, +}; + +static void __init sama5d3_pmc_setup(struct device_node *np) +{ + const char *slck_name, *mainxtal_name; + struct pmc_data *sama5d3_pmc; + const char *parent_names[5]; + struct regmap *regmap; + struct clk_hw *hw; + int i; + bool bypass; + + i = of_property_match_string(np, "clock-names", "slow_clk"); + if (i < 0) + return; + + slck_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "main_xtal"); + if (i < 0) + return; + mainxtal_name = of_clk_get_parent_name(np, i); + + regmap = syscon_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + sama5d3_pmc = pmc_data_allocate(PMC_MAIN + 1, + nck(sama5d3_systemck), + nck(sama5d3_periphck), 0); + if (!sama5d3_pmc) + return; + + hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000, + 50000000); + if (IS_ERR(hw)) + goto err_free; + + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, + bypass); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = "main_rc_osc"; + parent_names[1] = "main_osc"; + hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0, + &sama5d3_pll_layout, &plla_characteristics); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack"); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck"); + if (IS_ERR(hw)) + goto err_free; + + sama5d3_pmc->chws[PMC_UTMI] = hw; + + parent_names[0] = slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "plladivck"; + parent_names[3] = "utmick"; + hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, + &at91sam9x5_master_layout, + &mck_characteristics); + if (IS_ERR(hw)) + goto err_free; + + sama5d3_pmc->chws[PMC_MCK] = hw; + + parent_names[0] = "plladivck"; + parent_names[1] = "utmick"; + hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2); + if (IS_ERR(hw)) + goto err_free; + + hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "plladivck"; + parent_names[3] = "utmick"; + parent_names[4] = "masterck"; + for (i = 0; i < 3; i++) { + char name[6]; + + snprintf(name, sizeof(name), "prog%d", i); + + hw = at91_clk_register_programmable(regmap, name, + parent_names, 5, i, + &at91sam9x5_programmable_layout); + if (IS_ERR(hw)) + goto err_free; + } + + for (i = 0; i < ARRAY_SIZE(sama5d3_systemck); i++) { + hw = at91_clk_register_system(regmap, sama5d3_systemck[i].n, + sama5d3_systemck[i].p, + sama5d3_systemck[i].id); + if (IS_ERR(hw)) + goto err_free; + + sama5d3_pmc->shws[sama5d3_systemck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(sama5d3_periphck); i++) { + hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &sama5d3_pcr_layout, + sama5d3_periphck[i].n, + "masterck", + sama5d3_periphck[i].id, + &sama5d3_periphck[i].r); + if (IS_ERR(hw)) + goto err_free; + + sama5d3_pmc->phws[sama5d3_periphck[i].id] = hw; + } + + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d3_pmc); + + return; + +err_free: + pmc_data_free(sama5d3_pmc); +} +/* + * The TCB is used as the clocksource so its clock is needed early. This means + * this can't be a platform driver. + */ +CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup); diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c index 6e780c2a9e6b..3c228b018116 100644 --- a/drivers/clk/clk-si5341.c +++ b/drivers/clk/clk-si5341.c @@ -16,6 +16,8 @@ #include <linux/slab.h> #include <asm/unaligned.h> +#define SI5341_NUM_INPUTS 4 + #define SI5341_MAX_NUM_OUTPUTS 10 #define SI5340_MAX_NUM_OUTPUTS 4 @@ -56,8 +58,8 @@ struct clk_si5341 { struct i2c_client *i2c_client; struct clk_si5341_synth synth[SI5341_NUM_SYNTH]; struct clk_si5341_output clk[SI5341_MAX_NUM_OUTPUTS]; - struct clk *pxtal; - const char *pxtal_name; + struct clk *input_clk[SI5341_NUM_INPUTS]; + const char *input_clk_name[SI5341_NUM_INPUTS]; const u16 *reg_output_offset; const u16 *reg_rdiv_offset; u64 freq_vco; /* 13500–14256 MHz */ @@ -78,10 +80,25 @@ struct clk_si5341_output_config { #define SI5341_DEVICE_REV 0x0005 #define SI5341_STATUS 0x000C #define SI5341_SOFT_RST 0x001C +#define SI5341_IN_SEL 0x0021 +#define SI5341_XAXB_CFG 0x090E +#define SI5341_IN_EN 0x0949 +#define SI5341_INX_TO_PFD_EN 0x094A + +/* Input selection */ +#define SI5341_IN_SEL_MASK 0x06 +#define SI5341_IN_SEL_SHIFT 1 +#define SI5341_IN_SEL_REGCTRL 0x01 +#define SI5341_INX_TO_PFD_SHIFT 4 + +/* XTAL config bits */ +#define SI5341_XAXB_CFG_EXTCLK_EN BIT(0) +#define SI5341_XAXB_CFG_PDNB BIT(1) /* Input dividers (48-bit) */ #define SI5341_IN_PDIV(x) (0x0208 + ((x) * 10)) #define SI5341_IN_PSET(x) (0x020E + ((x) * 10)) +#define SI5341_PX_UPD 0x0230 /* PLL configuration */ #define SI5341_PLL_M_NUM 0x0235 @@ -120,6 +137,10 @@ struct si5341_reg_default { u8 value; }; +static const char * const si5341_input_clock_names[] = { + "in0", "in1", "in2", "xtal" +}; + /* Output configuration registers 0..9 are not quite logically organized */ static const u16 si5341_reg_output_offset[] = { 0x0108, @@ -390,7 +411,112 @@ static unsigned long si5341_clk_recalc_rate(struct clk_hw *hw, return (unsigned long)res; } +static int si5341_clk_get_selected_input(struct clk_si5341 *data) +{ + int err; + u32 val; + + err = regmap_read(data->regmap, SI5341_IN_SEL, &val); + if (err < 0) + return err; + + return (val & SI5341_IN_SEL_MASK) >> SI5341_IN_SEL_SHIFT; +} + +static u8 si5341_clk_get_parent(struct clk_hw *hw) +{ + struct clk_si5341 *data = to_clk_si5341(hw); + int res = si5341_clk_get_selected_input(data); + + if (res < 0) + return 0; /* Apparently we cannot report errors */ + + return res; +} + +static int si5341_clk_reparent(struct clk_si5341 *data, u8 index) +{ + int err; + u8 val; + + val = (index << SI5341_IN_SEL_SHIFT) & SI5341_IN_SEL_MASK; + /* Enable register-based input selection */ + val |= SI5341_IN_SEL_REGCTRL; + + err = regmap_update_bits(data->regmap, + SI5341_IN_SEL, SI5341_IN_SEL_REGCTRL | SI5341_IN_SEL_MASK, val); + if (err < 0) + return err; + + if (index < 3) { + /* Enable input buffer for selected input */ + err = regmap_update_bits(data->regmap, + SI5341_IN_EN, 0x07, BIT(index)); + if (err < 0) + return err; + + /* Enables the input to phase detector */ + err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN, + 0x7 << SI5341_INX_TO_PFD_SHIFT, + BIT(index + SI5341_INX_TO_PFD_SHIFT)); + if (err < 0) + return err; + + /* Power down XTAL oscillator and buffer */ + err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG, + SI5341_XAXB_CFG_PDNB, 0); + if (err < 0) + return err; + + /* + * Set the P divider to "1". There's no explanation in the + * datasheet of these registers, but the clockbuilder software + * programs a "1" when the input is being used. + */ + err = regmap_write(data->regmap, SI5341_IN_PDIV(index), 1); + if (err < 0) + return err; + + err = regmap_write(data->regmap, SI5341_IN_PSET(index), 1); + if (err < 0) + return err; + + /* Set update PDIV bit */ + err = regmap_write(data->regmap, SI5341_PX_UPD, BIT(index)); + if (err < 0) + return err; + } else { + /* Disable all input buffers */ + err = regmap_update_bits(data->regmap, SI5341_IN_EN, 0x07, 0); + if (err < 0) + return err; + + /* Disable input to phase detector */ + err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN, + 0x7 << SI5341_INX_TO_PFD_SHIFT, 0); + if (err < 0) + return err; + + /* Power up XTAL oscillator and buffer */ + err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG, + SI5341_XAXB_CFG_PDNB, SI5341_XAXB_CFG_PDNB); + if (err < 0) + return err; + } + + return 0; +} + +static int si5341_clk_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_si5341 *data = to_clk_si5341(hw); + + return si5341_clk_reparent(data, index); +} + static const struct clk_ops si5341_clk_ops = { + .set_parent = si5341_clk_set_parent, + .get_parent = si5341_clk_get_parent, .recalc_rate = si5341_clk_recalc_rate, }; @@ -985,7 +1111,8 @@ static const struct regmap_range si5341_regmap_volatile_range[] = { regmap_reg_range(0x000C, 0x0012), /* Status */ regmap_reg_range(0x001C, 0x001E), /* reset, finc/fdec */ regmap_reg_range(0x00E2, 0x00FE), /* NVM, interrupts, device ready */ - /* Update bits for synth config */ + /* Update bits for P divider and synth config */ + regmap_reg_range(SI5341_PX_UPD, SI5341_PX_UPD), regmap_reg_range(SI5341_SYNTH_N_UPD(0), SI5341_SYNTH_N_UPD(0)), regmap_reg_range(SI5341_SYNTH_N_UPD(1), SI5341_SYNTH_N_UPD(1)), regmap_reg_range(SI5341_SYNTH_N_UPD(2), SI5341_SYNTH_N_UPD(2)), @@ -1122,6 +1249,7 @@ static int si5341_initialize_pll(struct clk_si5341 *data) struct device_node *np = data->i2c_client->dev.of_node; u32 m_num = 0; u32 m_den = 0; + int sel; if (of_property_read_u32(np, "silabs,pll-m-num", &m_num)) { dev_err(&data->i2c_client->dev, @@ -1135,7 +1263,11 @@ static int si5341_initialize_pll(struct clk_si5341 *data) if (!m_num || !m_den) { dev_err(&data->i2c_client->dev, "PLL configuration invalid, assume 14GHz\n"); - m_den = clk_get_rate(data->pxtal) / 10; + sel = si5341_clk_get_selected_input(data); + if (sel < 0) + return sel; + + m_den = clk_get_rate(data->input_clk[sel]) / 10; m_num = 1400000000; } @@ -1143,11 +1275,52 @@ static int si5341_initialize_pll(struct clk_si5341 *data) SI5341_PLL_M_NUM, m_num, m_den); } +static int si5341_clk_select_active_input(struct clk_si5341 *data) +{ + int res; + int err; + int i; + + res = si5341_clk_get_selected_input(data); + if (res < 0) + return res; + + /* If the current register setting is invalid, pick the first input */ + if (!data->input_clk[res]) { + dev_dbg(&data->i2c_client->dev, + "Input %d not connected, rerouting\n", res); + res = -ENODEV; + for (i = 0; i < SI5341_NUM_INPUTS; ++i) { + if (data->input_clk[i]) { + res = i; + break; + } + } + if (res < 0) { + dev_err(&data->i2c_client->dev, + "No clock input available\n"); + return res; + } + } + + /* Make sure the selected clock is also enabled and routed */ + err = si5341_clk_reparent(data, res); + if (err < 0) + return err; + + err = clk_prepare_enable(data->input_clk[res]); + if (err < 0) + return err; + + return res; +} + static int si5341_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct clk_si5341 *data; struct clk_init_data init; + struct clk *input; const char *root_clock_name; const char *synth_clock_names[SI5341_NUM_SYNTH]; int err; @@ -1161,12 +1334,16 @@ static int si5341_probe(struct i2c_client *client, data->i2c_client = client; - data->pxtal = devm_clk_get(&client->dev, "xtal"); - if (IS_ERR(data->pxtal)) { - if (PTR_ERR(data->pxtal) == -EPROBE_DEFER) - return -EPROBE_DEFER; - - dev_err(&client->dev, "Missing xtal clock input\n"); + for (i = 0; i < SI5341_NUM_INPUTS; ++i) { + input = devm_clk_get(&client->dev, si5341_input_clock_names[i]); + if (IS_ERR(input)) { + if (PTR_ERR(input) == -EPROBE_DEFER) + return -EPROBE_DEFER; + data->input_clk_name[i] = si5341_input_clock_names[i]; + } else { + data->input_clk[i] = input; + data->input_clk_name[i] = __clk_get_name(input); + } } err = si5341_dt_parse_dt(client, config); @@ -1188,9 +1365,6 @@ static int si5341_probe(struct i2c_client *client, if (err < 0) return err; - /* "Activate" the xtal (usually a fixed clock) */ - clk_prepare_enable(data->pxtal); - if (of_property_read_bool(client->dev.of_node, "silabs,reprogram")) { initialization_required = true; } else { @@ -1223,7 +1397,14 @@ static int si5341_probe(struct i2c_client *client, ARRAY_SIZE(si5341_reg_defaults)); if (err < 0) return err; + } + + /* Input must be up and running at this point */ + err = si5341_clk_select_active_input(data); + if (err < 0) + return err; + if (initialization_required) { /* PLL configuration is required */ err = si5341_initialize_pll(data); if (err < 0) @@ -1231,9 +1412,8 @@ static int si5341_probe(struct i2c_client *client, } /* Register the PLL */ - data->pxtal_name = __clk_get_name(data->pxtal); - init.parent_names = &data->pxtal_name; - init.num_parents = 1; /* For now, only XTAL input supported */ + init.parent_names = data->input_clk_name; + init.num_parents = SI5341_NUM_INPUTS; init.ops = &si5341_clk_ops; init.flags = 0; data->hw.init = &init; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index f0f2b599fd7e..f2c1377ef324 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -488,7 +488,7 @@ unsigned long clk_hw_get_rate(const struct clk_hw *hw) } EXPORT_SYMBOL_GPL(clk_hw_get_rate); -static unsigned long __clk_get_accuracy(struct clk_core *core) +static unsigned long clk_core_get_accuracy_no_lock(struct clk_core *core) { if (!core) return 0; @@ -774,7 +774,7 @@ static void clk_core_rate_restore_protect(struct clk_core *core, int count) * clk_rate_exclusive_get - get exclusivity over the clk rate control * @clk: the clk over which the exclusity of rate control is requested * - * clk_rate_exlusive_get() begins a critical section during which a clock + * clk_rate_exclusive_get() begins a critical section during which a clock * consumer cannot tolerate any other consumer making any operation on the * clock which could result in a rate change or rate glitch. Exclusive clocks * cannot have their rate changed, either directly or indirectly due to changes @@ -1517,18 +1517,12 @@ static void __clk_recalc_accuracies(struct clk_core *core) __clk_recalc_accuracies(child); } -static long clk_core_get_accuracy(struct clk_core *core) +static long clk_core_get_accuracy_recalc(struct clk_core *core) { - unsigned long accuracy; - - clk_prepare_lock(); if (core && (core->flags & CLK_GET_ACCURACY_NOCACHE)) __clk_recalc_accuracies(core); - accuracy = __clk_get_accuracy(core); - clk_prepare_unlock(); - - return accuracy; + return clk_core_get_accuracy_no_lock(core); } /** @@ -1542,10 +1536,16 @@ static long clk_core_get_accuracy(struct clk_core *core) */ long clk_get_accuracy(struct clk *clk) { + long accuracy; + if (!clk) return 0; - return clk_core_get_accuracy(clk->core); + clk_prepare_lock(); + accuracy = clk_core_get_accuracy_recalc(clk->core); + clk_prepare_unlock(); + + return accuracy; } EXPORT_SYMBOL_GPL(clk_get_accuracy); @@ -1599,19 +1599,12 @@ static void __clk_recalc_rates(struct clk_core *core, unsigned long msg) __clk_recalc_rates(child, msg); } -static unsigned long clk_core_get_rate(struct clk_core *core) +static unsigned long clk_core_get_rate_recalc(struct clk_core *core) { - unsigned long rate; - - clk_prepare_lock(); - if (core && (core->flags & CLK_GET_RATE_NOCACHE)) __clk_recalc_rates(core, 0); - rate = clk_core_get_rate_nolock(core); - clk_prepare_unlock(); - - return rate; + return clk_core_get_rate_nolock(core); } /** @@ -1624,10 +1617,16 @@ static unsigned long clk_core_get_rate(struct clk_core *core) */ unsigned long clk_get_rate(struct clk *clk) { + unsigned long rate; + if (!clk) return 0; - return clk_core_get_rate(clk->core); + clk_prepare_lock(); + rate = clk_core_get_rate_recalc(clk->core); + clk_prepare_unlock(); + + return rate; } EXPORT_SYMBOL_GPL(clk_get_rate); @@ -2660,12 +2659,14 @@ static int clk_core_get_phase(struct clk_core *core) { int ret; - clk_prepare_lock(); + lockdep_assert_held(&prepare_lock); + if (!core->ops->get_phase) + return 0; + /* Always try to update cached phase if possible */ - if (core->ops->get_phase) - core->phase = core->ops->get_phase(core->hw); - ret = core->phase; - clk_prepare_unlock(); + ret = core->ops->get_phase(core->hw); + if (ret >= 0) + core->phase = ret; return ret; } @@ -2679,10 +2680,16 @@ static int clk_core_get_phase(struct clk_core *core) */ int clk_get_phase(struct clk *clk) { + int ret; + if (!clk) return 0; - return clk_core_get_phase(clk->core); + clk_prepare_lock(); + ret = clk_core_get_phase(clk->core); + clk_prepare_unlock(); + + return ret; } EXPORT_SYMBOL_GPL(clk_get_phase); @@ -2896,13 +2903,22 @@ static struct hlist_head *orphan_list[] = { static void clk_summary_show_one(struct seq_file *s, struct clk_core *c, int level) { - seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n", + int phase; + + seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ", level * 3 + 1, "", 30 - level * 3, c->name, c->enable_count, c->prepare_count, c->protect_count, - clk_core_get_rate(c), clk_core_get_accuracy(c), - clk_core_get_phase(c), - clk_core_get_scaled_duty_cycle(c, 100000)); + clk_core_get_rate_recalc(c), + clk_core_get_accuracy_recalc(c)); + + phase = clk_core_get_phase(c); + if (phase >= 0) + seq_printf(s, "%5d", phase); + else + seq_puts(s, "-----"); + + seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000)); } static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c, @@ -2939,6 +2955,7 @@ DEFINE_SHOW_ATTRIBUTE(clk_summary); static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level) { + int phase; unsigned long min_rate, max_rate; clk_core_get_boundaries(c, &min_rate, &max_rate); @@ -2948,11 +2965,13 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level) seq_printf(s, "\"enable_count\": %d,", c->enable_count); seq_printf(s, "\"prepare_count\": %d,", c->prepare_count); seq_printf(s, "\"protect_count\": %d,", c->protect_count); - seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c)); + seq_printf(s, "\"rate\": %lu,", clk_core_get_rate_recalc(c)); seq_printf(s, "\"min_rate\": %lu,", min_rate); seq_printf(s, "\"max_rate\": %lu,", max_rate); - seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c)); - seq_printf(s, "\"phase\": %d,", clk_core_get_phase(c)); + seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy_recalc(c)); + phase = clk_core_get_phase(c); + if (phase >= 0) + seq_printf(s, "\"phase\": %d,", phase); seq_printf(s, "\"duty_cycle\": %u", clk_core_get_scaled_duty_cycle(c, 100000)); } @@ -3323,7 +3342,9 @@ static void clk_core_reparent_orphans_nolock(void) static int __clk_core_init(struct clk_core *core) { int ret; + struct clk_core *parent; unsigned long rate; + int phase; if (!core) return -EINVAL; @@ -3394,7 +3415,7 @@ static int __clk_core_init(struct clk_core *core) goto out; } - core->parent = __clk_init_parent(core); + parent = core->parent = __clk_init_parent(core); /* * Populate core->parent if parent has already been clk_core_init'd. If @@ -3406,10 +3427,9 @@ static int __clk_core_init(struct clk_core *core) * clocks and re-parent any that are children of the clock currently * being clk_init'd. */ - if (core->parent) { - hlist_add_head(&core->child_node, - &core->parent->children); - core->orphan = core->parent->orphan; + if (parent) { + hlist_add_head(&core->child_node, &parent->children); + core->orphan = parent->orphan; } else if (!core->num_parents) { hlist_add_head(&core->child_node, &clk_root_list); core->orphan = false; @@ -3427,21 +3447,24 @@ static int __clk_core_init(struct clk_core *core) */ if (core->ops->recalc_accuracy) core->accuracy = core->ops->recalc_accuracy(core->hw, - __clk_get_accuracy(core->parent)); - else if (core->parent) - core->accuracy = core->parent->accuracy; + clk_core_get_accuracy_no_lock(parent)); + else if (parent) + core->accuracy = parent->accuracy; else core->accuracy = 0; /* - * Set clk's phase. + * Set clk's phase by clk_core_get_phase() caching the phase. * Since a phase is by definition relative to its parent, just * query the current clock phase, or just assume it's in phase. */ - if (core->ops->get_phase) - core->phase = core->ops->get_phase(core->hw); - else - core->phase = 0; + phase = clk_core_get_phase(core); + if (phase < 0) { + ret = phase; + pr_warn("%s: Failed to get phase for clk '%s'\n", __func__, + core->name); + goto out; + } /* * Set clk's duty cycle. @@ -3456,9 +3479,9 @@ static int __clk_core_init(struct clk_core *core) */ if (core->ops->recalc_rate) rate = core->ops->recalc_rate(core->hw, - clk_core_get_rate_nolock(core->parent)); - else if (core->parent) - rate = core->parent->rate; + clk_core_get_rate_nolock(parent)); + else if (parent) + rate = parent->rate; else rate = 0; core->rate = core->req_rate = rate; @@ -4865,8 +4888,8 @@ static int parent_ready(struct device_node *np) * * Return: error code or zero on success */ -int of_clk_detect_critical(struct device_node *np, - int index, unsigned long *flags) +int of_clk_detect_critical(struct device_node *np, int index, + unsigned long *flags) { struct property *prop; const __be32 *cur; diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c index 956dd653a43d..c051ecba5cf8 100644 --- a/drivers/clk/ingenic/jz4770-cgu.c +++ b/drivers/clk/ingenic/jz4770-cgu.c @@ -432,8 +432,10 @@ static void __init jz4770_cgu_init(struct device_node *np) cgu = ingenic_cgu_new(jz4770_cgu_clocks, ARRAY_SIZE(jz4770_cgu_clocks), np); - if (!cgu) + if (!cgu) { pr_err("%s: failed to initialise CGU\n", __func__); + return; + } retval = ingenic_cgu_register_clocks(cgu); if (retval) diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c index ea905ff72bf0..c758f1643067 100644 --- a/drivers/clk/ingenic/jz4780-cgu.c +++ b/drivers/clk/ingenic/jz4780-cgu.c @@ -9,14 +9,16 @@ #include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/of.h> + #include <dt-bindings/clock/jz4780-cgu.h> #include "cgu.h" #include "pm.h" /* CGU register offsets */ #define CGU_REG_CLOCKCONTROL 0x00 -#define CGU_REG_PLLCONTROL 0x0c +#define CGU_REG_LCR 0x04 #define CGU_REG_APLL 0x10 #define CGU_REG_MPLL 0x14 #define CGU_REG_EPLL 0x18 @@ -46,8 +48,8 @@ #define CGU_REG_CLOCKSTATUS 0xd4 /* bits within the OPCR register */ -#define OPCR_SPENDN0 (1 << 7) -#define OPCR_SPENDN1 (1 << 6) +#define OPCR_SPENDN0 BIT(7) +#define OPCR_SPENDN1 BIT(6) /* bits within the USBPCR register */ #define USBPCR_USB_MODE BIT(31) @@ -88,6 +90,13 @@ #define USBVBFIL_IDDIGFIL_MASK (0xffff << USBVBFIL_IDDIGFIL_SHIFT) #define USBVBFIL_USBVBFIL_MASK (0xffff) +/* bits within the LCR register */ +#define LCR_PD_SCPU BIT(31) +#define LCR_SCPUS BIT(27) + +/* bits within the CLKGR1 register */ +#define CLKGR1_CORE1 BIT(15) + static struct ingenic_cgu *cgu; static u8 jz4780_otg_phy_get_parent(struct clk_hw *hw) @@ -205,6 +214,42 @@ static const struct clk_ops jz4780_otg_phy_ops = { .set_rate = jz4780_otg_phy_set_rate, }; +static int jz4780_core1_enable(struct clk_hw *hw) +{ + struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw); + struct ingenic_cgu *cgu = ingenic_clk->cgu; + const unsigned int timeout = 5000; + unsigned long flags; + int retval; + u32 lcr, clkgr1; + + spin_lock_irqsave(&cgu->lock, flags); + + lcr = readl(cgu->base + CGU_REG_LCR); + lcr &= ~LCR_PD_SCPU; + writel(lcr, cgu->base + CGU_REG_LCR); + + clkgr1 = readl(cgu->base + CGU_REG_CLKGR1); + clkgr1 &= ~CLKGR1_CORE1; + writel(clkgr1, cgu->base + CGU_REG_CLKGR1); + + spin_unlock_irqrestore(&cgu->lock, flags); + + /* wait for the CPU to be powered up */ + retval = readl_poll_timeout(cgu->base + CGU_REG_LCR, lcr, + !(lcr & LCR_SCPUS), 10, timeout); + if (retval == -ETIMEDOUT) { + pr_err("%s: Wait for power up core1 timeout\n", __func__); + return retval; + } + + return 0; +} + +static const struct clk_ops jz4780_core1_ops = { + .enable = jz4780_core1_enable, +}; + static const s8 pll_od_encoding[16] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf, @@ -699,9 +744,9 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = { }, [JZ4780_CLK_CORE1] = { - "core1", CGU_CLK_GATE, + "core1", CGU_CLK_CUSTOM, .parents = { JZ4780_CLK_CPU, -1, -1, -1 }, - .gate = { CGU_REG_CLKGR1, 15 }, + .custom = { &jz4780_core1_ops }, }, }; diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c index ad7daa494fd4..153a954b0d2f 100644 --- a/drivers/clk/ingenic/tcu.c +++ b/drivers/clk/ingenic/tcu.c @@ -189,7 +189,7 @@ static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate, u8 prescale; if (req_rate > rate) - return -EINVAL; + return rate; prescale = ingenic_tcu_get_prescale(rate, req_rate); @@ -317,10 +317,17 @@ static const struct ingenic_soc_info jz4770_soc_info = { .has_tcu_clk = false, }; +static const struct ingenic_soc_info x1000_soc_info = { + .num_channels = 8, + .has_ost = false, /* X1000 has OST, but it not belong TCU */ + .has_tcu_clk = false, +}; + static const struct of_device_id ingenic_tcu_of_match[] __initconst = { { .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, }, { .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, }, { .compatible = "ingenic,jz4770-tcu", .data = &jz4770_soc_info, }, + { .compatible = "ingenic,x1000-tcu", .data = &x1000_soc_info, }, { /* sentinel */ } }; @@ -471,3 +478,4 @@ static void __init ingenic_tcu_init(struct device_node *np) CLK_OF_DECLARE_DRIVER(jz4740_cgu, "ingenic,jz4740-tcu", ingenic_tcu_init); CLK_OF_DECLARE_DRIVER(jz4725b_cgu, "ingenic,jz4725b-tcu", ingenic_tcu_init); CLK_OF_DECLARE_DRIVER(jz4770_cgu, "ingenic,jz4770-tcu", ingenic_tcu_init); +CLK_OF_DECLARE_DRIVER(x1000_cgu, "ingenic,x1000-tcu", ingenic_tcu_init); diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c index d2760a021301..fad616cac01e 100644 --- a/drivers/clk/meson/g12a.c +++ b/drivers/clk/meson/g12a.c @@ -3862,6 +3862,111 @@ static struct clk_regmap g12a_ts = { }, }; +/* SPICC SCLK source clock */ + +static const struct clk_parent_data spicc_sclk_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &g12a_clk81.hw }, + { .hw = &g12a_fclk_div4.hw }, + { .hw = &g12a_fclk_div3.hw }, + { .hw = &g12a_fclk_div5.hw }, + { .hw = &g12a_fclk_div7.hw }, +}; + +static struct clk_regmap g12a_spicc0_sclk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_SPICC_CLK_CNTL, + .mask = 7, + .shift = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc0_sclk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_sclk_parent_data, + .num_parents = ARRAY_SIZE(spicc_sclk_parent_data), + }, +}; + +static struct clk_regmap g12a_spicc0_sclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = HHI_SPICC_CLK_CNTL, + .shift = 0, + .width = 6, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc0_sclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &g12a_spicc0_sclk_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap g12a_spicc0_sclk = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_SPICC_CLK_CNTL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc0_sclk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &g12a_spicc0_sclk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap g12a_spicc1_sclk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_SPICC_CLK_CNTL, + .mask = 7, + .shift = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc1_sclk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_sclk_parent_data, + .num_parents = ARRAY_SIZE(spicc_sclk_parent_data), + }, +}; + +static struct clk_regmap g12a_spicc1_sclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = HHI_SPICC_CLK_CNTL, + .shift = 16, + .width = 6, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc1_sclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &g12a_spicc1_sclk_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap g12a_spicc1_sclk = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_SPICC_CLK_CNTL, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc1_sclk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &g12a_spicc1_sclk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + #define MESON_GATE(_name, _reg, _bit) \ MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw) @@ -4159,6 +4264,12 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = { [CLKID_VDEC_HEVCF] = &g12a_vdec_hevcf.hw, [CLKID_TS_DIV] = &g12a_ts_div.hw, [CLKID_TS] = &g12a_ts.hw, + [CLKID_SPICC0_SCLK_SEL] = &g12a_spicc0_sclk_sel.hw, + [CLKID_SPICC0_SCLK_DIV] = &g12a_spicc0_sclk_div.hw, + [CLKID_SPICC0_SCLK] = &g12a_spicc0_sclk.hw, + [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw, + [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw, + [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -4408,6 +4519,12 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = { [CLKID_CPUB_CLK_AXI] = &g12b_cpub_clk_axi.hw, [CLKID_CPUB_CLK_TRACE_SEL] = &g12b_cpub_clk_trace_sel.hw, [CLKID_CPUB_CLK_TRACE] = &g12b_cpub_clk_trace.hw, + [CLKID_SPICC0_SCLK_SEL] = &g12a_spicc0_sclk_sel.hw, + [CLKID_SPICC0_SCLK_DIV] = &g12a_spicc0_sclk_div.hw, + [CLKID_SPICC0_SCLK] = &g12a_spicc0_sclk.hw, + [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw, + [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw, + [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -4642,6 +4759,12 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = { [CLKID_CPU1_CLK] = &sm1_cpu1_clk.hw, [CLKID_CPU2_CLK] = &sm1_cpu2_clk.hw, [CLKID_CPU3_CLK] = &sm1_cpu3_clk.hw, + [CLKID_SPICC0_SCLK_SEL] = &g12a_spicc0_sclk_sel.hw, + [CLKID_SPICC0_SCLK_DIV] = &g12a_spicc0_sclk_div.hw, + [CLKID_SPICC0_SCLK] = &g12a_spicc0_sclk.hw, + [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw, + [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw, + [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -4877,6 +5000,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = { &sm1_cpu1_clk, &sm1_cpu2_clk, &sm1_cpu3_clk, + &g12a_spicc0_sclk_sel, + &g12a_spicc0_sclk_div, + &g12a_spicc0_sclk, + &g12a_spicc1_sclk_sel, + &g12a_spicc1_sclk_div, + &g12a_spicc1_sclk, }; static const struct reg_sequence g12a_init_regs[] = { diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h index 9df4068aced1..a8852556836e 100644 --- a/drivers/clk/meson/g12a.h +++ b/drivers/clk/meson/g12a.h @@ -255,8 +255,12 @@ #define CLKID_DSU_CLK_DYN1 249 #define CLKID_DSU_CLK_DYN 250 #define CLKID_DSU_CLK_FINAL 251 +#define CLKID_SPICC0_SCLK_SEL 256 +#define CLKID_SPICC0_SCLK_DIV 257 +#define CLKID_SPICC1_SCLK_SEL 259 +#define CLKID_SPICC1_SCLK_DIV 260 -#define NR_CLKS 256 +#define NR_CLKS 262 /* include the CLKIDs that have been made part of the DT binding */ #include <dt-bindings/clock/g12a-clkc.h> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 1f9c056e684c..5fd6a574f8c3 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -2613,19 +2613,12 @@ static MESON_GATE(gxbb_assist_misc, HHI_GCLK_MPEG0, 23); static MESON_GATE(gxbb_emmc_a, HHI_GCLK_MPEG0, 24); static MESON_GATE(gxbb_emmc_b, HHI_GCLK_MPEG0, 25); static MESON_GATE(gxbb_emmc_c, HHI_GCLK_MPEG0, 26); +static MESON_GATE(gxl_acodec, HHI_GCLK_MPEG0, 28); static MESON_GATE(gxbb_spi, HHI_GCLK_MPEG0, 30); static MESON_GATE(gxbb_i2s_spdif, HHI_GCLK_MPEG1, 2); static MESON_GATE(gxbb_eth, HHI_GCLK_MPEG1, 3); static MESON_GATE(gxbb_demux, HHI_GCLK_MPEG1, 4); -static MESON_GATE(gxbb_aiu_glue, HHI_GCLK_MPEG1, 6); -static MESON_GATE(gxbb_iec958, HHI_GCLK_MPEG1, 7); -static MESON_GATE(gxbb_i2s_out, HHI_GCLK_MPEG1, 8); -static MESON_GATE(gxbb_amclk, HHI_GCLK_MPEG1, 9); -static MESON_GATE(gxbb_aififo2, HHI_GCLK_MPEG1, 10); -static MESON_GATE(gxbb_mixer, HHI_GCLK_MPEG1, 11); -static MESON_GATE(gxbb_mixer_iface, HHI_GCLK_MPEG1, 12); -static MESON_GATE(gxbb_adc, HHI_GCLK_MPEG1, 13); static MESON_GATE(gxbb_blkmv, HHI_GCLK_MPEG1, 14); static MESON_GATE(gxbb_aiu, HHI_GCLK_MPEG1, 15); static MESON_GATE(gxbb_uart1, HHI_GCLK_MPEG1, 16); @@ -2680,6 +2673,16 @@ static MESON_GATE(gxbb_ao_ahb_bus, HHI_GCLK_AO, 2); static MESON_GATE(gxbb_ao_iface, HHI_GCLK_AO, 3); static MESON_GATE(gxbb_ao_i2c, HHI_GCLK_AO, 4); +/* AIU gates */ +static MESON_PCLK(gxbb_aiu_glue, HHI_GCLK_MPEG1, 6, &gxbb_aiu.hw); +static MESON_PCLK(gxbb_iec958, HHI_GCLK_MPEG1, 7, &gxbb_aiu_glue.hw); +static MESON_PCLK(gxbb_i2s_out, HHI_GCLK_MPEG1, 8, &gxbb_aiu_glue.hw); +static MESON_PCLK(gxbb_amclk, HHI_GCLK_MPEG1, 9, &gxbb_aiu_glue.hw); +static MESON_PCLK(gxbb_aififo2, HHI_GCLK_MPEG1, 10, &gxbb_aiu_glue.hw); +static MESON_PCLK(gxbb_mixer, HHI_GCLK_MPEG1, 11, &gxbb_aiu_glue.hw); +static MESON_PCLK(gxbb_mixer_iface, HHI_GCLK_MPEG1, 12, &gxbb_aiu_glue.hw); +static MESON_PCLK(gxbb_adc, HHI_GCLK_MPEG1, 13, &gxbb_aiu_glue.hw); + /* Array of all clocks provided by this provider */ static struct clk_hw_onecell_data gxbb_hw_onecell_data = { @@ -3100,6 +3103,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = { [CLKID_HDMI_SEL] = &gxbb_hdmi_sel.hw, [CLKID_HDMI_DIV] = &gxbb_hdmi_div.hw, [CLKID_HDMI] = &gxbb_hdmi.hw, + [CLKID_ACODEC] = &gxl_acodec.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -3491,6 +3495,7 @@ static struct clk_regmap *const gxl_clk_regmaps[] = { &gxl_hdmi_pll_od, &gxl_hdmi_pll_od2, &gxl_hdmi_pll_dco, + &gxl_acodec, }; static const struct meson_eeclkc_data gxbb_clkc_data = { diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index b53584fe66cf..1ee8cb7e2f5a 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -188,7 +188,7 @@ #define CLKID_HDMI_SEL 203 #define CLKID_HDMI_DIV 204 -#define NR_CLKS 206 +#define NR_CLKS 207 /* include the CLKIDs that have been made part of the DT binding */ #include <dt-bindings/clock/gxbb-clkc.h> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 9fd31f23b2a9..34a70c4b4899 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -2605,14 +2605,6 @@ static MESON_GATE(meson8b_spi, HHI_GCLK_MPEG0, 30); static MESON_GATE(meson8b_i2s_spdif, HHI_GCLK_MPEG1, 2); static MESON_GATE(meson8b_eth, HHI_GCLK_MPEG1, 3); static MESON_GATE(meson8b_demux, HHI_GCLK_MPEG1, 4); -static MESON_GATE(meson8b_aiu_glue, HHI_GCLK_MPEG1, 6); -static MESON_GATE(meson8b_iec958, HHI_GCLK_MPEG1, 7); -static MESON_GATE(meson8b_i2s_out, HHI_GCLK_MPEG1, 8); -static MESON_GATE(meson8b_amclk, HHI_GCLK_MPEG1, 9); -static MESON_GATE(meson8b_aififo2, HHI_GCLK_MPEG1, 10); -static MESON_GATE(meson8b_mixer, HHI_GCLK_MPEG1, 11); -static MESON_GATE(meson8b_mixer_iface, HHI_GCLK_MPEG1, 12); -static MESON_GATE(meson8b_adc, HHI_GCLK_MPEG1, 13); static MESON_GATE(meson8b_blkmv, HHI_GCLK_MPEG1, 14); static MESON_GATE(meson8b_aiu, HHI_GCLK_MPEG1, 15); static MESON_GATE(meson8b_uart1, HHI_GCLK_MPEG1, 16); @@ -2659,6 +2651,19 @@ static MESON_GATE(meson8b_vclk2_vencl, HHI_GCLK_OTHER, 25); static MESON_GATE(meson8b_vclk2_other, HHI_GCLK_OTHER, 26); static MESON_GATE(meson8b_edp, HHI_GCLK_OTHER, 31); +/* AIU gates */ +#define MESON_AIU_GLUE_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &meson8b_aiu_glue.hw) + +static MESON_PCLK(meson8b_aiu_glue, HHI_GCLK_MPEG1, 6, &meson8b_aiu.hw); +static MESON_AIU_GLUE_GATE(meson8b_iec958, HHI_GCLK_MPEG1, 7); +static MESON_AIU_GLUE_GATE(meson8b_i2s_out, HHI_GCLK_MPEG1, 8); +static MESON_AIU_GLUE_GATE(meson8b_amclk, HHI_GCLK_MPEG1, 9); +static MESON_AIU_GLUE_GATE(meson8b_aififo2, HHI_GCLK_MPEG1, 10); +static MESON_AIU_GLUE_GATE(meson8b_mixer, HHI_GCLK_MPEG1, 11); +static MESON_AIU_GLUE_GATE(meson8b_mixer_iface, HHI_GCLK_MPEG1, 12); +static MESON_AIU_GLUE_GATE(meson8b_adc, HHI_GCLK_MPEG1, 13); + /* Always On (AO) domain gates */ static MESON_GATE(meson8b_ao_media_cpu, HHI_GCLK_AO, 0); diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile index acc141adf087..14dc8a8a9d08 100644 --- a/drivers/clk/mmp/Makefile +++ b/drivers/clk/mmp/Makefile @@ -8,7 +8,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o obj-$(CONFIG_RESET_CONTROLLER) += reset.o obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o -obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o +obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o diff --git a/drivers/clk/mmp/clk-mix.c b/drivers/clk/mmp/clk-mix.c index d2cd36c54474..7a351ec65564 100644 --- a/drivers/clk/mmp/clk-mix.c +++ b/drivers/clk/mmp/clk-mix.c @@ -441,7 +441,7 @@ const struct clk_ops mmp_clk_mix_ops = { struct clk *mmp_clk_register_mix(struct device *dev, const char *name, - const char **parent_names, + const char * const *parent_names, u8 num_parents, unsigned long flags, struct mmp_clk_mix_config *config, diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c index 6e71591e63a0..52dc8b43acd9 100644 --- a/drivers/clk/mmp/clk-of-mmp2.c +++ b/drivers/clk/mmp/clk-of-mmp2.c @@ -3,6 +3,7 @@ * * Copyright (C) 2012 Marvell * Chao Xie <[email protected]> + * Copyright (C) 2020 Lubomir Rintel <[email protected]> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -48,17 +49,39 @@ #define APMU_SDH1 0x58 #define APMU_SDH2 0xe8 #define APMU_SDH3 0xec +#define APMU_SDH4 0x15c #define APMU_USB 0x5c #define APMU_DISP0 0x4c #define APMU_DISP1 0x110 #define APMU_CCIC0 0x50 #define APMU_CCIC1 0xf4 +#define APBC_THERMAL0 0x90 +#define APBC_THERMAL1 0x98 +#define APBC_THERMAL2 0x9c +#define APBC_THERMAL3 0xa0 #define APMU_USBHSIC0 0xf8 #define APMU_USBHSIC1 0xfc -#define MPMU_UART_PLL 0x14 +#define APMU_GPU 0xcc + +#define MPMU_FCCR 0x8 +#define MPMU_POSR 0x10 +#define MPMU_UART_PLL 0x14 +#define MPMU_PLL2_CR 0x34 +/* MMP3 specific below */ +#define MPMU_PLL3_CR 0x50 +#define MPMU_PLL3_CTRL1 0x58 +#define MPMU_PLL1_CTRL 0x5c +#define MPMU_PLL_DIFF_CTRL 0x68 +#define MPMU_PLL2_CTRL1 0x414 + +enum mmp2_clk_model { + CLK_MODEL_MMP2, + CLK_MODEL_MMP3, +}; struct mmp2_clk_unit { struct mmp_clk_unit unit; + enum mmp2_clk_model model; void __iomem *mpmu_base; void __iomem *apmu_base; void __iomem *apbc_base; @@ -67,11 +90,22 @@ struct mmp2_clk_unit { static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = { {MMP2_CLK_CLK32, "clk32", NULL, 0, 32768}, {MMP2_CLK_VCTCXO, "vctcxo", NULL, 0, 26000000}, - {MMP2_CLK_PLL1, "pll1", NULL, 0, 800000000}, - {MMP2_CLK_PLL2, "pll2", NULL, 0, 960000000}, {MMP2_CLK_USB_PLL, "usb_pll", NULL, 0, 480000000}, }; +static struct mmp_param_pll_clk pll_clks[] = { + {MMP2_CLK_PLL1, "pll1", 797330000, MPMU_FCCR, 0x4000, MPMU_POSR, 0}, + {MMP2_CLK_PLL2, "pll2", 0, MPMU_PLL2_CR, 0x0300, MPMU_PLL2_CR, 10}, +}; + +static struct mmp_param_pll_clk mmp3_pll_clks[] = { + {MMP2_CLK_PLL2, "pll1", 797330000, MPMU_FCCR, 0x4000, MPMU_POSR, 0, 26000000, MPMU_PLL1_CTRL, 25}, + {MMP2_CLK_PLL2, "pll2", 0, MPMU_PLL2_CR, 0x0300, MPMU_PLL2_CR, 10, 26000000, MPMU_PLL2_CTRL1, 25}, + {MMP3_CLK_PLL1_P, "pll1_p", 0, MPMU_PLL_DIFF_CTRL, 0x0010, 0, 0, 797330000, MPMU_PLL_DIFF_CTRL, 0}, + {MMP3_CLK_PLL2_P, "pll2_p", 0, MPMU_PLL_DIFF_CTRL, 0x0100, MPMU_PLL2_CR, 10, 26000000, MPMU_PLL_DIFF_CTRL, 5}, + {MMP3_CLK_PLL3, "pll3", 0, MPMU_PLL3_CR, 0x0300, MPMU_PLL3_CR, 10, 26000000, MPMU_PLL3_CTRL1, 25}, +}; + static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = { {MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0}, {MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0}, @@ -113,6 +147,16 @@ static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit) mmp_register_fixed_rate_clks(unit, fixed_rate_clks, ARRAY_SIZE(fixed_rate_clks)); + if (pxa_unit->model == CLK_MODEL_MMP3) { + mmp_register_pll_clks(unit, mmp3_pll_clks, + pxa_unit->mpmu_base, + ARRAY_SIZE(mmp3_pll_clks)); + } else { + mmp_register_pll_clks(unit, pll_clks, + pxa_unit->mpmu_base, + ARRAY_SIZE(pll_clks)); + } + mmp_register_fixed_factor_clks(unit, fixed_factor_clks, ARRAY_SIZE(fixed_factor_clks)); @@ -127,16 +171,16 @@ static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit) static DEFINE_SPINLOCK(uart0_lock); static DEFINE_SPINLOCK(uart1_lock); static DEFINE_SPINLOCK(uart2_lock); -static const char *uart_parent_names[] = {"uart_pll", "vctcxo"}; +static const char * const uart_parent_names[] = {"uart_pll", "vctcxo"}; static DEFINE_SPINLOCK(ssp0_lock); static DEFINE_SPINLOCK(ssp1_lock); static DEFINE_SPINLOCK(ssp2_lock); static DEFINE_SPINLOCK(ssp3_lock); -static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"}; +static const char * const ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"}; static DEFINE_SPINLOCK(timer_lock); -static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"}; +static const char * const timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"}; static DEFINE_SPINLOCK(reset_lock); @@ -176,6 +220,13 @@ static struct mmp_param_gate_clk apbc_gate_clks[] = { {MMP2_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock}, {MMP2_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock}, {MMP2_CLK_TIMER, "timer_clk", "timer_mux", CLK_SET_RATE_PARENT, APBC_TIMER, 0x7, 0x3, 0x0, 0, &timer_lock}, + {MMP2_CLK_THERMAL0, "thermal0_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL0, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock}, +}; + +static struct mmp_param_gate_clk mmp3_apbc_gate_clks[] = { + {MMP3_CLK_THERMAL1, "thermal1_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL1, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock}, + {MMP3_CLK_THERMAL2, "thermal2_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL2, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock}, + {MMP3_CLK_THERMAL3, "thermal3_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL3, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock}, }; static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit) @@ -187,10 +238,15 @@ static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit) mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base, ARRAY_SIZE(apbc_gate_clks)); + + if (pxa_unit->model == CLK_MODEL_MMP3) { + mmp_register_gate_clks(unit, mmp3_apbc_gate_clks, pxa_unit->apbc_base, + ARRAY_SIZE(mmp3_apbc_gate_clks)); + } } static DEFINE_SPINLOCK(sdh_lock); -static const char *sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"}; +static const char * const sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"}; static struct mmp_clk_mix_config sdh_mix_config = { .reg_info = DEFINE_MIX_REG_INFO(4, 10, 2, 8, 32), }; @@ -201,11 +257,20 @@ static DEFINE_SPINLOCK(usbhsic1_lock); static DEFINE_SPINLOCK(disp0_lock); static DEFINE_SPINLOCK(disp1_lock); -static const char *disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"}; +static const char * const disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"}; static DEFINE_SPINLOCK(ccic0_lock); static DEFINE_SPINLOCK(ccic1_lock); -static const char *ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"}; +static const char * const ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"}; + +static DEFINE_SPINLOCK(gpu_lock); +static const char * const mmp2_gpu_gc_parent_names[] = {"pll1_2", "pll1_3", "pll2_2", "pll2_3", "pll2", "usb_pll"}; +static u32 mmp2_gpu_gc_parent_table[] = { 0x0000, 0x0040, 0x0080, 0x00c0, 0x1000, 0x1040 }; +static const char * const mmp2_gpu_bus_parent_names[] = {"pll1_4", "pll2", "pll2_2", "usb_pll"}; +static u32 mmp2_gpu_bus_parent_table[] = { 0x0000, 0x0020, 0x0030, 0x4020 }; +static const char * const mmp3_gpu_bus_parent_names[] = {"pll1_4", "pll1_6", "pll1_2", "pll2_2"}; +static const char * const mmp3_gpu_gc_parent_names[] = {"pll1", "pll2", "pll1_p", "pll2_p"}; + static struct mmp_clk_mix_config ccic0_mix_config = { .reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32), }; @@ -218,6 +283,15 @@ static struct mmp_param_mux_clk apmu_mux_clks[] = { {MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock}, }; +static struct mmp_param_mux_clk mmp3_apmu_mux_clks[] = { + {0, "gpu_bus_mux", mmp3_gpu_bus_parent_names, ARRAY_SIZE(mmp3_gpu_bus_parent_names), + CLK_SET_RATE_PARENT, APMU_GPU, 4, 2, 0, &gpu_lock}, + {0, "gpu_3d_mux", mmp3_gpu_gc_parent_names, ARRAY_SIZE(mmp3_gpu_gc_parent_names), + CLK_SET_RATE_PARENT, APMU_GPU, 6, 2, 0, &gpu_lock}, + {0, "gpu_2d_mux", mmp3_gpu_gc_parent_names, ARRAY_SIZE(mmp3_gpu_gc_parent_names), + CLK_SET_RATE_PARENT, APMU_GPU, 12, 2, 0, &gpu_lock}, +}; + static struct mmp_param_div_clk apmu_div_clks[] = { {0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock}, {0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock}, @@ -226,6 +300,11 @@ static struct mmp_param_div_clk apmu_div_clks[] = { {0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock}, }; +static struct mmp_param_div_clk mmp3_apmu_div_clks[] = { + {0, "gpu_3d_div", "gpu_3d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 24, 4, 0, &gpu_lock}, + {0, "gpu_2d_div", "gpu_2d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 28, 4, 0, &gpu_lock}, +}; + static struct mmp_param_gate_clk apmu_gate_clks[] = { {MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock}, {MMP2_CLK_USBHSIC0, "usbhsic0_clk", "usb_pll", 0, APMU_USBHSIC0, 0x1b, 0x1b, 0x0, 0, &usbhsic0_lock}, @@ -235,8 +314,8 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = { {MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock}, {MMP2_CLK_SDH2, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock}, {MMP2_CLK_SDH3, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock}, - {MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock}, - {MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock}, + {MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock}, + {MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock}, {MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock}, {MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x09, 0x09, 0x0, 0, &disp1_lock}, {MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock}, @@ -246,6 +325,17 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = { {MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock}, {MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock}, {MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock}, + {MMP2_CLK_GPU_BUS, "gpu_bus_clk", "gpu_bus_mux", CLK_SET_RATE_PARENT, APMU_GPU, 0xa, 0xa, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock}, +}; + +static struct mmp_param_gate_clk mmp2_apmu_gate_clks[] = { + {MMP2_CLK_GPU_3D, "gpu_3d_clk", "gpu_3d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 0x5, 0x5, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock}, +}; + +static struct mmp_param_gate_clk mmp3_apmu_gate_clks[] = { + {MMP3_CLK_SDH4, "sdh4_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH4, 0x1b, 0x1b, 0x0, 0, &sdh_lock}, + {MMP3_CLK_GPU_3D, "gpu_3d_clk", "gpu_3d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x5, 0x5, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock}, + {MMP3_CLK_GPU_2D, "gpu_2d_clk", "gpu_2d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x1c0000, 0x1c0000, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock}, }; static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit) @@ -281,6 +371,34 @@ static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit) mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base, ARRAY_SIZE(apmu_gate_clks)); + + if (pxa_unit->model == CLK_MODEL_MMP3) { + mmp_register_mux_clks(unit, mmp3_apmu_mux_clks, pxa_unit->apmu_base, + ARRAY_SIZE(mmp3_apmu_mux_clks)); + + mmp_register_div_clks(unit, mmp3_apmu_div_clks, pxa_unit->apmu_base, + ARRAY_SIZE(mmp3_apmu_div_clks)); + + mmp_register_gate_clks(unit, mmp3_apmu_gate_clks, pxa_unit->apmu_base, + ARRAY_SIZE(mmp3_apmu_gate_clks)); + } else { + clk_register_mux_table(NULL, "gpu_3d_mux", mmp2_gpu_gc_parent_names, + ARRAY_SIZE(mmp2_gpu_gc_parent_names), + CLK_SET_RATE_PARENT, + pxa_unit->apmu_base + APMU_GPU, + 0, 0x10c0, 0, + mmp2_gpu_gc_parent_table, &gpu_lock); + + clk_register_mux_table(NULL, "gpu_bus_mux", mmp2_gpu_bus_parent_names, + ARRAY_SIZE(mmp2_gpu_bus_parent_names), + CLK_SET_RATE_PARENT, + pxa_unit->apmu_base + APMU_GPU, + 0, 0x4030, 0, + mmp2_gpu_bus_parent_table, &gpu_lock); + + mmp_register_gate_clks(unit, mmp2_apmu_gate_clks, pxa_unit->apmu_base, + ARRAY_SIZE(mmp2_apmu_gate_clks)); + } } static void mmp2_clk_reset_init(struct device_node *np, @@ -313,6 +431,11 @@ static void __init mmp2_clk_init(struct device_node *np) if (!pxa_unit) return; + if (of_device_is_compatible(np, "marvell,mmp3-clock")) + pxa_unit->model = CLK_MODEL_MMP3; + else + pxa_unit->model = CLK_MODEL_MMP2; + pxa_unit->mpmu_base = of_iomap(np, 0); if (!pxa_unit->mpmu_base) { pr_err("failed to map mpmu registers\n"); @@ -352,3 +475,4 @@ free_memory: } CLK_OF_DECLARE(mmp2_clk, "marvell,mmp2-clock", mmp2_clk_init); +CLK_OF_DECLARE(mmp3_clk, "marvell,mmp3-clock", mmp2_clk_init); diff --git a/drivers/clk/mmp/clk-pll.c b/drivers/clk/mmp/clk-pll.c new file mode 100644 index 000000000000..7077be293871 --- /dev/null +++ b/drivers/clk/mmp/clk-pll.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MMP PLL clock rate calculation + * + * Copyright (C) 2020 Lubomir Rintel <[email protected]> + */ + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> + +#include "clk.h" + +#define to_clk_mmp_pll(hw) container_of(hw, struct mmp_clk_pll, hw) + +struct mmp_clk_pll { + struct clk_hw hw; + unsigned long default_rate; + void __iomem *enable_reg; + u32 enable; + void __iomem *reg; + u8 shift; + + unsigned long input_rate; + void __iomem *postdiv_reg; + u8 postdiv_shift; +}; + +static int mmp_clk_pll_is_enabled(struct clk_hw *hw) +{ + struct mmp_clk_pll *pll = to_clk_mmp_pll(hw); + u32 val; + + val = readl_relaxed(pll->enable_reg); + if ((val & pll->enable) == pll->enable) + return 1; + + /* Some PLLs, if not software controlled, output default clock. */ + if (pll->default_rate > 0) + return 1; + + return 0; +} + +static unsigned long mmp_clk_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct mmp_clk_pll *pll = to_clk_mmp_pll(hw); + u32 fbdiv, refdiv, postdiv; + u64 rate; + u32 val; + + val = readl_relaxed(pll->enable_reg); + if ((val & pll->enable) != pll->enable) + return pll->default_rate; + + if (pll->reg) { + val = readl_relaxed(pll->reg); + fbdiv = (val >> pll->shift) & 0x1ff; + refdiv = (val >> (pll->shift + 9)) & 0x1f; + } else { + fbdiv = 2; + refdiv = 1; + } + + if (pll->postdiv_reg) { + /* MMP3 clock rate calculation */ + static const u8 postdivs[] = {2, 3, 4, 5, 6, 8, 10, 12, 16}; + + val = readl_relaxed(pll->postdiv_reg); + postdiv = (val >> pll->postdiv_shift) & 0x7; + + rate = pll->input_rate; + rate *= 2 * fbdiv; + do_div(rate, refdiv); + do_div(rate, postdivs[postdiv]); + } else { + /* MMP2 clock rate calculation */ + if (refdiv == 3) { + rate = 19200000; + } else if (refdiv == 4) { + rate = 26000000; + } else { + pr_err("bad refdiv: %d (0x%08x)\n", refdiv, val); + return 0; + } + + rate *= fbdiv + 2; + do_div(rate, refdiv + 2); + } + + return (unsigned long)rate; +} + +static const struct clk_ops mmp_clk_pll_ops = { + .is_enabled = mmp_clk_pll_is_enabled, + .recalc_rate = mmp_clk_pll_recalc_rate, +}; + +struct clk *mmp_clk_register_pll(char *name, + unsigned long default_rate, + void __iomem *enable_reg, u32 enable, + void __iomem *reg, u8 shift, + unsigned long input_rate, + void __iomem *postdiv_reg, u8 postdiv_shift) +{ + struct mmp_clk_pll *pll; + struct clk *clk; + struct clk_init_data init; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &mmp_clk_pll_ops; + init.flags = 0; + init.parent_names = NULL; + init.num_parents = 0; + + pll->default_rate = default_rate; + pll->enable_reg = enable_reg; + pll->enable = enable; + pll->reg = reg; + pll->shift = shift; + + pll->input_rate = input_rate; + pll->postdiv_reg = postdiv_reg; + pll->postdiv_shift = postdiv_shift; + + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c index ca7d37e2c7be..317123641d1e 100644 --- a/drivers/clk/mmp/clk.c +++ b/drivers/clk/mmp/clk.c @@ -176,6 +176,37 @@ void mmp_register_div_clks(struct mmp_clk_unit *unit, } } +void mmp_register_pll_clks(struct mmp_clk_unit *unit, + struct mmp_param_pll_clk *clks, + void __iomem *base, int size) +{ + struct clk *clk; + int i; + + for (i = 0; i < size; i++) { + void __iomem *reg = NULL; + + if (clks[i].offset) + reg = base + clks[i].offset; + + clk = mmp_clk_register_pll(clks[i].name, + clks[i].default_rate, + base + clks[i].enable_offset, + clks[i].enable, + reg, clks[i].shift, + clks[i].input_rate, + base + clks[i].postdiv_offset, + clks[i].postdiv_shift); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", + __func__, clks[i].name); + continue; + } + if (clks[i].id) + unit->clk_table[clks[i].id] = clk; + } +} + void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id, struct clk *clk) { diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h index 70bb73257647..971b4d6d992f 100644 --- a/drivers/clk/mmp/clk.h +++ b/drivers/clk/mmp/clk.h @@ -97,7 +97,7 @@ struct mmp_clk_mix { extern const struct clk_ops mmp_clk_mix_ops; extern struct clk *mmp_clk_register_mix(struct device *dev, const char *name, - const char **parent_names, + const char * const *parent_names, u8 num_parents, unsigned long flags, struct mmp_clk_mix_config *config, @@ -124,9 +124,6 @@ extern struct clk *mmp_clk_register_gate(struct device *dev, const char *name, u32 val_disable, unsigned int gate_flags, spinlock_t *lock); - -extern struct clk *mmp_clk_register_pll2(const char *name, - const char *parent_name, unsigned long flags); extern struct clk *mmp_clk_register_apbc(const char *name, const char *parent_name, void __iomem *base, unsigned int delay, unsigned int apbc_flags, spinlock_t *lock); @@ -196,7 +193,7 @@ void mmp_register_gate_clks(struct mmp_clk_unit *unit, struct mmp_param_mux_clk { unsigned int id; char *name; - const char **parent_name; + const char * const *parent_name; u8 num_parents; unsigned long flags; unsigned long offset; @@ -224,6 +221,30 @@ void mmp_register_div_clks(struct mmp_clk_unit *unit, struct mmp_param_div_clk *clks, void __iomem *base, int size); +struct mmp_param_pll_clk { + unsigned int id; + char *name; + unsigned long default_rate; + unsigned long enable_offset; + u32 enable; + unsigned long offset; + u8 shift; + /* MMP3 specific: */ + unsigned long input_rate; + unsigned long postdiv_offset; + unsigned long postdiv_shift; +}; +void mmp_register_pll_clks(struct mmp_clk_unit *unit, + struct mmp_param_pll_clk *clks, + void __iomem *base, int size); + +extern struct clk *mmp_clk_register_pll(char *name, + unsigned long default_rate, + void __iomem *enable_reg, u32 enable, + void __iomem *reg, u8 shift, + unsigned long input_rate, + void __iomem *postdiv_reg, u8 postdiv_shift); + #define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc) \ { \ .width_div = (w_d), \ diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig index 250d8165167a..ac2dd92ce2ef 100644 --- a/drivers/clk/renesas/Kconfig +++ b/drivers/clk/renesas/Kconfig @@ -20,7 +20,7 @@ config CLK_RENESAS select CLK_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793 select CLK_R8A7792 if ARCH_R8A7792 select CLK_R8A7794 if ARCH_R8A7794 - select CLK_R8A7795 if ARCH_R8A77950 || ARCH_R8A77951 || ARCH_R8A7795 + select CLK_R8A7795 if ARCH_R8A77950 || ARCH_R8A77951 select CLK_R8A77960 if ARCH_R8A77960 select CLK_R8A77961 if ARCH_R8A77961 select CLK_R8A77965 if ARCH_R8A77965 @@ -161,6 +161,7 @@ config CLK_RCAR_GEN3_CPG config CLK_RCAR_USB2_CLOCK_SEL bool "Renesas R-Car USB2 clock selector support" depends on ARCH_RENESAS || COMPILE_TEST + select RESET_CONTROLLER help This is a driver for R-Car USB2 clock selector diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index fbc8c75f4314..ff5b3020cb03 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -44,6 +44,7 @@ enum clk_ids { CLK_S3, CLK_SDSRC, CLK_SSPSRC, + CLK_RPCSRC, CLK_RINT, /* Module Clocks */ @@ -70,6 +71,12 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = { DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1), DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1), DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1), + DEF_BASE(".rpcsrc", CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1), + + DEF_BASE("rpc", R8A7795_CLK_RPC, CLK_TYPE_GEN3_RPC, + CLK_RPCSRC), + DEF_BASE("rpcd2", R8A7795_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2, + R8A7795_CLK_RPC), DEF_GEN3_OSC(".r", CLK_RINT, CLK_EXTAL, 32), @@ -242,6 +249,7 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = { DEF_MOD("can-fd", 914, R8A7795_CLK_S3D2), DEF_MOD("can-if1", 915, R8A7795_CLK_S3D4), DEF_MOD("can-if0", 916, R8A7795_CLK_S3D4), + DEF_MOD("rpc-if", 917, R8A7795_CLK_RPCD2), DEF_MOD("i2c6", 918, R8A7795_CLK_S0D6), DEF_MOD("i2c5", 919, R8A7795_CLK_S0D6), DEF_MOD("i2c-dvfs", 926, R8A7795_CLK_CP), diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c index e8420d3ada94..e8d466dbc7f9 100644 --- a/drivers/clk/renesas/r8a7796-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c @@ -46,6 +46,7 @@ enum clk_ids { CLK_S3, CLK_SDSRC, CLK_SSPSRC, + CLK_RPCSRC, CLK_RINT, /* Module Clocks */ @@ -72,6 +73,12 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = { DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1), DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1), DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1), + DEF_BASE(".rpcsrc", CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1), + + DEF_BASE("rpc", R8A7796_CLK_RPC, CLK_TYPE_GEN3_RPC, + CLK_RPCSRC), + DEF_BASE("rpcd2", R8A7796_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2, + R8A7796_CLK_RPC), DEF_GEN3_OSC(".r", CLK_RINT, CLK_EXTAL, 32), @@ -105,6 +112,7 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = { DEF_GEN3_SD("sd3", R8A7796_CLK_SD3, CLK_SDSRC, 0x26c), DEF_FIXED("cl", R8A7796_CLK_CL, CLK_PLL1_DIV2, 48, 1), + DEF_FIXED("cr", R8A7796_CLK_CR, CLK_PLL1_DIV4, 2, 1), DEF_FIXED("cp", R8A7796_CLK_CP, CLK_EXTAL, 2, 1), DEF_FIXED("cpex", R8A7796_CLK_CPEX, CLK_EXTAL, 2, 1), @@ -132,6 +140,7 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = { DEF_MOD("sys-dmac2", 217, R8A7796_CLK_S3D1), DEF_MOD("sys-dmac1", 218, R8A7796_CLK_S3D1), DEF_MOD("sys-dmac0", 219, R8A7796_CLK_S0D3), + DEF_MOD("sceg-pub", 229, R8A7796_CLK_CR), DEF_MOD("cmt3", 300, R8A7796_CLK_R), DEF_MOD("cmt2", 301, R8A7796_CLK_R), DEF_MOD("cmt1", 302, R8A7796_CLK_R), @@ -215,6 +224,7 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = { DEF_MOD("can-fd", 914, R8A7796_CLK_S3D2), DEF_MOD("can-if1", 915, R8A7796_CLK_S3D4), DEF_MOD("can-if0", 916, R8A7796_CLK_S3D4), + DEF_MOD("rpc-if", 917, R8A7796_CLK_RPCD2), DEF_MOD("i2c6", 918, R8A7796_CLK_S0D6), DEF_MOD("i2c5", 919, R8A7796_CLK_S0D6), DEF_MOD("i2c-dvfs", 926, R8A7796_CLK_CP), diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c index b3af4da2ca74..7a05a2fc1cc6 100644 --- a/drivers/clk/renesas/r8a77965-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c @@ -43,6 +43,7 @@ enum clk_ids { CLK_S3, CLK_SDSRC, CLK_SSPSRC, + CLK_RPCSRC, CLK_RINT, /* Module Clocks */ @@ -68,6 +69,12 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = { DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1), DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1), DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1), + DEF_BASE(".rpcsrc", CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1), + + DEF_BASE("rpc", R8A77965_CLK_RPC, CLK_TYPE_GEN3_RPC, + CLK_RPCSRC), + DEF_BASE("rpcd2", R8A77965_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2, + R8A77965_CLK_RPC), DEF_GEN3_OSC(".r", CLK_RINT, CLK_EXTAL, 32), @@ -99,7 +106,8 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = { DEF_GEN3_SD("sd2", R8A77965_CLK_SD2, CLK_SDSRC, 0x268), DEF_GEN3_SD("sd3", R8A77965_CLK_SD3, CLK_SDSRC, 0x26c), - DEF_FIXED("cl", R8A77965_CLK_CL, CLK_PLL1_DIV2, 48, 1), + DEF_FIXED("cl", R8A77965_CLK_CL, CLK_PLL1_DIV2, 48, 1), + DEF_FIXED("cr", R8A77965_CLK_CR, CLK_PLL1_DIV4, 2, 1), DEF_FIXED("cp", R8A77965_CLK_CP, CLK_EXTAL, 2, 1), DEF_FIXED("cpex", R8A77965_CLK_CPEX, CLK_EXTAL, 2, 1), @@ -127,6 +135,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = { DEF_MOD("sys-dmac2", 217, R8A77965_CLK_S3D1), DEF_MOD("sys-dmac1", 218, R8A77965_CLK_S3D1), DEF_MOD("sys-dmac0", 219, R8A77965_CLK_S0D3), + DEF_MOD("sceg-pub", 229, R8A77965_CLK_CR), DEF_MOD("cmt3", 300, R8A77965_CLK_R), DEF_MOD("cmt2", 301, R8A77965_CLK_R), @@ -215,6 +224,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = { DEF_MOD("can-fd", 914, R8A77965_CLK_S3D2), DEF_MOD("can-if1", 915, R8A77965_CLK_S3D4), DEF_MOD("can-if0", 916, R8A77965_CLK_S3D4), + DEF_MOD("rpc-if", 917, R8A77965_CLK_RPCD2), DEF_MOD("i2c6", 918, R8A77965_CLK_S0D6), DEF_MOD("i2c5", 919, R8A77965_CLK_S0D6), DEF_MOD("i2c-dvfs", 926, R8A77965_CLK_CP), diff --git a/drivers/clk/renesas/r8a77990-cpg-mssr.c b/drivers/clk/renesas/r8a77990-cpg-mssr.c index ceabf55c21c2..8eda2e3e2480 100644 --- a/drivers/clk/renesas/r8a77990-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77990-cpg-mssr.c @@ -105,6 +105,7 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = { DEF_GEN3_SD("sd3", R8A77990_CLK_SD3, CLK_SDSRC, 0x026c), DEF_FIXED("cl", R8A77990_CLK_CL, CLK_PLL1, 48, 1), + DEF_FIXED("cr", R8A77990_CLK_CR, CLK_PLL1D2, 2, 1), DEF_FIXED("cp", R8A77990_CLK_CP, CLK_EXTAL, 2, 1), DEF_FIXED("cpex", R8A77990_CLK_CPEX, CLK_EXTAL, 4, 1), @@ -135,6 +136,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = { DEF_MOD("sys-dmac2", 217, R8A77990_CLK_S3D1), DEF_MOD("sys-dmac1", 218, R8A77990_CLK_S3D1), DEF_MOD("sys-dmac0", 219, R8A77990_CLK_S3D1), + DEF_MOD("sceg-pub", 229, R8A77990_CLK_CR), DEF_MOD("cmt3", 300, R8A77990_CLK_R), DEF_MOD("cmt2", 301, R8A77990_CLK_R), diff --git a/drivers/clk/renesas/r8a77995-cpg-mssr.c b/drivers/clk/renesas/r8a77995-cpg-mssr.c index 962bb337f2e7..056ebf3e70e2 100644 --- a/drivers/clk/renesas/r8a77995-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c @@ -91,6 +91,7 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = { DEF_FIXED("s3d4", R8A77995_CLK_S3D4, CLK_S3, 4, 1), DEF_FIXED("cl", R8A77995_CLK_CL, CLK_PLL1, 48, 1), + DEF_FIXED("cr", R8A77995_CLK_CR, CLK_PLL1D2, 2, 1), DEF_FIXED("cp", R8A77995_CLK_CP, CLK_EXTAL, 2, 1), DEF_FIXED("cpex", R8A77995_CLK_CPEX, CLK_EXTAL, 4, 1), @@ -122,6 +123,7 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = { DEF_MOD("sys-dmac2", 217, R8A77995_CLK_S3D1), DEF_MOD("sys-dmac1", 218, R8A77995_CLK_S3D1), DEF_MOD("sys-dmac0", 219, R8A77995_CLK_S3D1), + DEF_MOD("sceg-pub", 229, R8A77995_CLK_CR), DEF_MOD("cmt3", 300, R8A77995_CLK_R), DEF_MOD("cmt2", 301, R8A77995_CLK_R), DEF_MOD("cmt1", 302, R8A77995_CLK_R), diff --git a/drivers/clk/renesas/rcar-usb2-clock-sel.c b/drivers/clk/renesas/rcar-usb2-clock-sel.c index b97f5f9326cf..d4c02986c34e 100644 --- a/drivers/clk/renesas/rcar-usb2-clock-sel.c +++ b/drivers/clk/renesas/rcar-usb2-clock-sel.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/reset.h> #include <linux/slab.h> #define USB20_CLKSET0 0x00 @@ -26,9 +27,16 @@ #define CLKSET0_PRIVATE BIT(0) #define CLKSET0_EXTAL_ONLY (CLKSET0_INTCLK_EN | CLKSET0_PRIVATE) +static const struct clk_bulk_data rcar_usb2_clocks[] = { + { .id = "ehci_ohci", }, + { .id = "hs-usb-if", }, +}; + struct usb2_clock_sel_priv { void __iomem *base; struct clk_hw hw; + struct clk_bulk_data clks[ARRAY_SIZE(rcar_usb2_clocks)]; + struct reset_control *rsts; bool extal; bool xtal; }; @@ -53,14 +61,32 @@ static void usb2_clock_sel_disable_extal_only(struct usb2_clock_sel_priv *priv) static int usb2_clock_sel_enable(struct clk_hw *hw) { - usb2_clock_sel_enable_extal_only(to_priv(hw)); + struct usb2_clock_sel_priv *priv = to_priv(hw); + int ret; + + ret = reset_control_deassert(priv->rsts); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(ARRAY_SIZE(priv->clks), priv->clks); + if (ret) { + reset_control_assert(priv->rsts); + return ret; + } + + usb2_clock_sel_enable_extal_only(priv); return 0; } static void usb2_clock_sel_disable(struct clk_hw *hw) { - usb2_clock_sel_disable_extal_only(to_priv(hw)); + struct usb2_clock_sel_priv *priv = to_priv(hw); + + usb2_clock_sel_disable_extal_only(priv); + + clk_bulk_disable_unprepare(ARRAY_SIZE(priv->clks), priv->clks); + reset_control_assert(priv->rsts); } /* @@ -119,6 +145,7 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev) struct usb2_clock_sel_priv *priv; struct clk *clk; struct clk_init_data init; + int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -128,6 +155,15 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); + memcpy(priv->clks, rcar_usb2_clocks, sizeof(priv->clks)); + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(priv->clks), priv->clks); + if (ret < 0) + return ret; + + priv->rsts = devm_reset_control_array_get(dev, true, false); + if (IS_ERR(priv->rsts)) + return PTR_ERR(priv->rsts); + pm_runtime_enable(dev); pm_runtime_get_sync(dev); diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index 4abe7ff31f53..975454a3dd72 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -51,9 +51,9 @@ static int rockchip_mmc_get_phase(struct clk_hw *hw) u16 degrees; u32 delay_num = 0; - /* See the comment for rockchip_mmc_set_phase below */ + /* Constant signal, no measurable phase shift */ if (!rate) - return -EINVAL; + return 0; raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift); diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c index dad31308c071..1949ae7851b2 100644 --- a/drivers/clk/samsung/clk.c +++ b/drivers/clk/samsung/clk.c @@ -356,10 +356,6 @@ struct samsung_clk_provider * __init samsung_cmu_register_one( } ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids); - if (!ctx) { - panic("%s: unable to allocate ctx\n", __func__); - return ctx; - } if (cmu->pll_clks) samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks, diff --git a/drivers/clk/socfpga/clk-gate-s10.c b/drivers/clk/socfpga/clk-gate-s10.c index 54a464fa63e0..8be4722f6064 100644 --- a/drivers/clk/socfpga/clk-gate-s10.c +++ b/drivers/clk/socfpga/clk-gate-s10.c @@ -65,54 +65,49 @@ static const struct clk_ops dbgclk_ops = { .get_parent = socfpga_gate_get_parent, }; -struct clk *s10_register_gate(const char *name, const char *parent_name, - const char * const *parent_names, - u8 num_parents, unsigned long flags, - void __iomem *regbase, unsigned long gate_reg, - unsigned long gate_idx, unsigned long div_reg, - unsigned long div_offset, u8 div_width, - unsigned long bypass_reg, u8 bypass_shift, - u8 fixed_div) +struct clk *s10_register_gate(const struct stratix10_gate_clock *clks, void __iomem *regbase) { struct clk *clk; struct socfpga_gate_clk *socfpga_clk; struct clk_init_data init; + const char * const *parent_names = clks->parent_names; + const char *parent_name = clks->parent_name; socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL); if (!socfpga_clk) return NULL; - socfpga_clk->hw.reg = regbase + gate_reg; - socfpga_clk->hw.bit_idx = gate_idx; + socfpga_clk->hw.reg = regbase + clks->gate_reg; + socfpga_clk->hw.bit_idx = clks->gate_idx; gateclk_ops.enable = clk_gate_ops.enable; gateclk_ops.disable = clk_gate_ops.disable; - socfpga_clk->fixed_div = fixed_div; + socfpga_clk->fixed_div = clks->fixed_div; - if (div_reg) - socfpga_clk->div_reg = regbase + div_reg; + if (clks->div_reg) + socfpga_clk->div_reg = regbase + clks->div_reg; else socfpga_clk->div_reg = NULL; - socfpga_clk->width = div_width; - socfpga_clk->shift = div_offset; + socfpga_clk->width = clks->div_width; + socfpga_clk->shift = clks->div_offset; - if (bypass_reg) - socfpga_clk->bypass_reg = regbase + bypass_reg; + if (clks->bypass_reg) + socfpga_clk->bypass_reg = regbase + clks->bypass_reg; else socfpga_clk->bypass_reg = NULL; - socfpga_clk->bypass_shift = bypass_shift; + socfpga_clk->bypass_shift = clks->bypass_shift; - if (streq(name, "cs_pdbg_clk")) + if (streq(clks->name, "cs_pdbg_clk")) init.ops = &dbgclk_ops; else init.ops = &gateclk_ops; - init.name = name; - init.flags = flags; + init.name = clks->name; + init.flags = clks->flags; - init.num_parents = num_parents; + init.num_parents = clks->num_parents; init.parent_names = parent_names ? parent_names : &parent_name; socfpga_clk->hw.hw.init = &init; @@ -121,6 +116,5 @@ struct clk *s10_register_gate(const char *name, const char *parent_name, kfree(socfpga_clk); return NULL; } - return clk; } diff --git a/drivers/clk/socfpga/clk-periph-s10.c b/drivers/clk/socfpga/clk-periph-s10.c index 1a191eeeebba..dd6d4056e9de 100644 --- a/drivers/clk/socfpga/clk-periph-s10.c +++ b/drivers/clk/socfpga/clk-periph-s10.c @@ -73,26 +73,27 @@ static const struct clk_ops peri_cnt_clk_ops = { .get_parent = clk_periclk_get_parent, }; -struct clk *s10_register_periph(const char *name, const char *parent_name, - const char * const *parent_names, - u8 num_parents, unsigned long flags, - void __iomem *reg, unsigned long offset) +struct clk *s10_register_periph(const struct stratix10_perip_c_clock *clks, + void __iomem *reg) { struct clk *clk; struct socfpga_periph_clk *periph_clk; struct clk_init_data init; + const char *name = clks->name; + const char *parent_name = clks->parent_name; + const char * const *parent_names = clks->parent_names; periph_clk = kzalloc(sizeof(*periph_clk), GFP_KERNEL); if (WARN_ON(!periph_clk)) return NULL; - periph_clk->hw.reg = reg + offset; + periph_clk->hw.reg = reg + clks->offset; init.name = name; init.ops = &peri_c_clk_ops; - init.flags = flags; + init.flags = clks->flags; - init.num_parents = num_parents; + init.num_parents = clks->num_parents; init.parent_names = parent_names ? parent_names : &parent_name; periph_clk->hw.hw.init = &init; @@ -105,38 +106,37 @@ struct clk *s10_register_periph(const char *name, const char *parent_name, return clk; } -struct clk *s10_register_cnt_periph(const char *name, const char *parent_name, - const char * const *parent_names, - u8 num_parents, unsigned long flags, - void __iomem *regbase, unsigned long offset, - u8 fixed_divider, unsigned long bypass_reg, - unsigned long bypass_shift) +struct clk *s10_register_cnt_periph(const struct stratix10_perip_cnt_clock *clks, + void __iomem *regbase) { struct clk *clk; struct socfpga_periph_clk *periph_clk; struct clk_init_data init; + const char *name = clks->name; + const char *parent_name = clks->parent_name; + const char * const *parent_names = clks->parent_names; periph_clk = kzalloc(sizeof(*periph_clk), GFP_KERNEL); if (WARN_ON(!periph_clk)) return NULL; - if (offset) - periph_clk->hw.reg = regbase + offset; + if (clks->offset) + periph_clk->hw.reg = regbase + clks->offset; else periph_clk->hw.reg = NULL; - if (bypass_reg) - periph_clk->bypass_reg = regbase + bypass_reg; + if (clks->bypass_reg) + periph_clk->bypass_reg = regbase + clks->bypass_reg; else periph_clk->bypass_reg = NULL; - periph_clk->bypass_shift = bypass_shift; - periph_clk->fixed_div = fixed_divider; + periph_clk->bypass_shift = clks->bypass_shift; + periph_clk->fixed_div = clks->fixed_divider; init.name = name; init.ops = &peri_cnt_clk_ops; - init.flags = flags; + init.flags = clks->flags; - init.num_parents = num_parents; + init.num_parents = clks->num_parents; init.parent_names = parent_names ? parent_names : &parent_name; periph_clk->hw.hw.init = &init; diff --git a/drivers/clk/socfpga/clk-pll-s10.c b/drivers/clk/socfpga/clk-pll-s10.c index 4705eb544f01..a301bb22f36c 100644 --- a/drivers/clk/socfpga/clk-pll-s10.c +++ b/drivers/clk/socfpga/clk-pll-s10.c @@ -39,7 +39,9 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk, /* read VCO1 reg for numerator and denominator */ reg = readl(socfpgaclk->hw.reg); refdiv = (reg & SOCFPGA_PLL_REFDIV_MASK) >> SOCFPGA_PLL_REFDIV_SHIFT; - vco_freq = (unsigned long long)parent_rate / refdiv; + + vco_freq = parent_rate; + do_div(vco_freq, refdiv); /* Read mdiv and fdiv from the fdbck register */ reg = readl(socfpgaclk->hw.reg + 0x4); @@ -108,19 +110,20 @@ static struct clk_ops clk_boot_ops = { .prepare = clk_pll_prepare, }; -struct clk *s10_register_pll(const char *name, const char * const *parent_names, - u8 num_parents, unsigned long flags, - void __iomem *reg, unsigned long offset) +struct clk *s10_register_pll(const struct stratix10_pll_clock *clks, + void __iomem *reg) { struct clk *clk; struct socfpga_pll *pll_clk; struct clk_init_data init; + const char *name = clks->name; + const char * const *parent_names = clks->parent_names; pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL); if (WARN_ON(!pll_clk)) return NULL; - pll_clk->hw.reg = reg + offset; + pll_clk->hw.reg = reg + clks->offset; if (streq(name, SOCFPGA_BOOT_CLK)) init.ops = &clk_boot_ops; @@ -128,9 +131,9 @@ struct clk *s10_register_pll(const char *name, const char * const *parent_names, init.ops = &clk_pll_ops; init.name = name; - init.flags = flags; + init.flags = clks->flags; - init.num_parents = num_parents; + init.num_parents = clks->num_parents; init.parent_names = parent_names; pll_clk->hw.hw.init = &init; diff --git a/drivers/clk/socfpga/clk-s10.c b/drivers/clk/socfpga/clk-s10.c index 993f3a73c71e..dea7c6c7d269 100644 --- a/drivers/clk/socfpga/clk-s10.c +++ b/drivers/clk/socfpga/clk-s10.c @@ -177,9 +177,7 @@ static int s10_clk_register_c_perip(const struct stratix10_perip_c_clock *clks, int i; for (i = 0; i < nums; i++) { - clk = s10_register_periph(clks[i].name, clks[i].parent_name, - clks[i].parent_names, clks[i].num_parents, - clks[i].flags, base, clks[i].offset); + clk = s10_register_periph(&clks[i], base); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, clks[i].name); @@ -198,14 +196,7 @@ static int s10_clk_register_cnt_perip(const struct stratix10_perip_cnt_clock *cl int i; for (i = 0; i < nums; i++) { - clk = s10_register_cnt_periph(clks[i].name, clks[i].parent_name, - clks[i].parent_names, - clks[i].num_parents, - clks[i].flags, base, - clks[i].offset, - clks[i].fixed_divider, - clks[i].bypass_reg, - clks[i].bypass_shift); + clk = s10_register_cnt_periph(&clks[i], base); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, clks[i].name); @@ -225,16 +216,7 @@ static int s10_clk_register_gate(const struct stratix10_gate_clock *clks, int i; for (i = 0; i < nums; i++) { - clk = s10_register_gate(clks[i].name, clks[i].parent_name, - clks[i].parent_names, - clks[i].num_parents, - clks[i].flags, base, - clks[i].gate_reg, - clks[i].gate_idx, clks[i].div_reg, - clks[i].div_offset, clks[i].div_width, - clks[i].bypass_reg, - clks[i].bypass_shift, - clks[i].fixed_div); + clk = s10_register_gate(&clks[i], base); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, clks[i].name); @@ -254,10 +236,7 @@ static int s10_clk_register_pll(const struct stratix10_pll_clock *clks, int i; for (i = 0; i < nums; i++) { - clk = s10_register_pll(clks[i].name, clks[i].parent_names, - clks[i].num_parents, - clks[i].flags, base, - clks[i].offset); + clk = s10_register_pll(&clks[i], base); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, clks[i].name); diff --git a/drivers/clk/socfpga/stratix10-clk.h b/drivers/clk/socfpga/stratix10-clk.h index e8e121907952..fcabef42249c 100644 --- a/drivers/clk/socfpga/stratix10-clk.h +++ b/drivers/clk/socfpga/stratix10-clk.h @@ -60,21 +60,12 @@ struct stratix10_gate_clock { u8 fixed_div; }; -struct clk *s10_register_pll(const char *, const char *const *, u8, - unsigned long, void __iomem *, unsigned long); - -struct clk *s10_register_periph(const char *, const char *, - const char * const *, u8, unsigned long, - void __iomem *, unsigned long); -struct clk *s10_register_cnt_periph(const char *, const char *, - const char * const *, u8, - unsigned long, void __iomem *, - unsigned long, u8, unsigned long, - unsigned long); -struct clk *s10_register_gate(const char *, const char *, - const char * const *, u8, - unsigned long, void __iomem *, - unsigned long, unsigned long, - unsigned long, unsigned long, u8, - unsigned long, u8, u8); +struct clk *s10_register_pll(const struct stratix10_pll_clock *, + void __iomem *); +struct clk *s10_register_periph(const struct stratix10_perip_c_clock *, + void __iomem *); +struct clk *s10_register_cnt_periph(const struct stratix10_perip_cnt_clock *, + void __iomem *); +struct clk *s10_register_gate(const struct stratix10_gate_clock *, + void __iomem *); #endif /* __STRATIX10_CLK_H */ diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h index 116e6f826d04..54d1f96f4b68 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h @@ -55,10 +55,6 @@ /* All the DRAM gates are exported */ -/* Some more module clocks are exported */ - -#define CLK_MBUS 112 - /* And the DSI and GPU module clock is exported */ #define CLK_NUMBER (CLK_GPU + 1) diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c index d9668493c3f9..524f33275bc7 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c @@ -50,8 +50,10 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4, CLK_SET_RATE_PARENT); static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4, CLK_SET_RATE_PARENT); +static SUNXI_CCU_M(rot_div_a83_clk, "rot-div", "pll-de", 0x0c, 0x0c, 4, + CLK_SET_RATE_PARENT); -static struct ccu_common *sun50i_h6_de3_clks[] = { +static struct ccu_common *sun8i_a83t_de2_clks[] = { &mixer0_clk.common, &mixer1_clk.common, &wb_clk.common, @@ -60,16 +62,16 @@ static struct ccu_common *sun50i_h6_de3_clks[] = { &bus_mixer1_clk.common, &bus_wb_clk.common, - &mixer0_div_clk.common, - &mixer1_div_clk.common, - &wb_div_clk.common, + &mixer0_div_a83_clk.common, + &mixer1_div_a83_clk.common, + &wb_div_a83_clk.common, &bus_rot_clk.common, &rot_clk.common, - &rot_div_clk.common, + &rot_div_a83_clk.common, }; -static struct ccu_common *sun8i_a83t_de2_clks[] = { +static struct ccu_common *sun8i_h3_de2_clks[] = { &mixer0_clk.common, &mixer1_clk.common, &wb_clk.common, @@ -78,34 +80,38 @@ static struct ccu_common *sun8i_a83t_de2_clks[] = { &bus_mixer1_clk.common, &bus_wb_clk.common, - &mixer0_div_a83_clk.common, - &mixer1_div_a83_clk.common, - &wb_div_a83_clk.common, + &mixer0_div_clk.common, + &mixer1_div_clk.common, + &wb_div_clk.common, }; -static struct ccu_common *sun8i_h3_de2_clks[] = { +static struct ccu_common *sun8i_v3s_de2_clks[] = { &mixer0_clk.common, - &mixer1_clk.common, &wb_clk.common, &bus_mixer0_clk.common, - &bus_mixer1_clk.common, &bus_wb_clk.common, &mixer0_div_clk.common, - &mixer1_div_clk.common, &wb_div_clk.common, }; -static struct ccu_common *sun8i_v3s_de2_clks[] = { +static struct ccu_common *sun50i_a64_de2_clks[] = { &mixer0_clk.common, + &mixer1_clk.common, &wb_clk.common, &bus_mixer0_clk.common, + &bus_mixer1_clk.common, &bus_wb_clk.common, &mixer0_div_clk.common, + &mixer1_div_clk.common, &wb_div_clk.common, + + &bus_rot_clk.common, + &rot_clk.common, + &rot_div_clk.common, }; static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = { @@ -113,16 +119,19 @@ static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = { [CLK_MIXER0] = &mixer0_clk.common.hw, [CLK_MIXER1] = &mixer1_clk.common.hw, [CLK_WB] = &wb_clk.common.hw, + [CLK_ROT] = &rot_clk.common.hw, [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw, [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw, [CLK_BUS_WB] = &bus_wb_clk.common.hw, + [CLK_BUS_ROT] = &bus_rot_clk.common.hw, [CLK_MIXER0_DIV] = &mixer0_div_a83_clk.common.hw, [CLK_MIXER1_DIV] = &mixer1_div_a83_clk.common.hw, [CLK_WB_DIV] = &wb_div_a83_clk.common.hw, + [CLK_ROT_DIV] = &rot_div_a83_clk.common.hw, }, - .num = CLK_NUMBER_WITHOUT_ROT, + .num = CLK_NUMBER_WITH_ROT, }; static struct clk_hw_onecell_data sun8i_h3_de2_hw_clks = { @@ -156,7 +165,7 @@ static struct clk_hw_onecell_data sun8i_v3s_de2_hw_clks = { .num = CLK_NUMBER_WITHOUT_ROT, }; -static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = { +static struct clk_hw_onecell_data sun50i_a64_de2_hw_clks = { .hws = { [CLK_MIXER0] = &mixer0_clk.common.hw, [CLK_MIXER1] = &mixer1_clk.common.hw, @@ -179,9 +188,19 @@ static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = { static struct ccu_reset_map sun8i_a83t_de2_resets[] = { [RST_MIXER0] = { 0x08, BIT(0) }, /* - * For A83T, H3 and R40, mixer1 reset line is shared with wb, so - * only RST_WB is exported here. - * For V3s there's just no mixer1, so it also shares this struct. + * Mixer1 reset line is shared with wb, so only RST_WB is + * exported here. + */ + [RST_WB] = { 0x08, BIT(2) }, + [RST_ROT] = { 0x08, BIT(3) }, +}; + +static struct ccu_reset_map sun8i_h3_de2_resets[] = { + [RST_MIXER0] = { 0x08, BIT(0) }, + /* + * Mixer1 reset line is shared with wb, so only RST_WB is + * exported here. + * V3s doesn't have mixer1, so it also shares this struct. */ [RST_WB] = { 0x08, BIT(2) }, }; @@ -190,13 +209,13 @@ static struct ccu_reset_map sun50i_a64_de2_resets[] = { [RST_MIXER0] = { 0x08, BIT(0) }, [RST_MIXER1] = { 0x08, BIT(1) }, [RST_WB] = { 0x08, BIT(2) }, + [RST_ROT] = { 0x08, BIT(3) }, }; -static struct ccu_reset_map sun50i_h6_de3_resets[] = { +static struct ccu_reset_map sun50i_h5_de2_resets[] = { [RST_MIXER0] = { 0x08, BIT(0) }, [RST_MIXER1] = { 0x08, BIT(1) }, [RST_WB] = { 0x08, BIT(2) }, - [RST_ROT] = { 0x08, BIT(3) }, }; static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = { @@ -215,28 +234,18 @@ static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = { .hw_clks = &sun8i_h3_de2_hw_clks, - .resets = sun8i_a83t_de2_resets, - .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets), + .resets = sun8i_h3_de2_resets, + .num_resets = ARRAY_SIZE(sun8i_h3_de2_resets), }; -static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = { - .ccu_clks = sun8i_h3_de2_clks, - .num_ccu_clks = ARRAY_SIZE(sun8i_h3_de2_clks), +static const struct sunxi_ccu_desc sun8i_r40_de2_clk_desc = { + .ccu_clks = sun50i_a64_de2_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_a64_de2_clks), - .hw_clks = &sun8i_h3_de2_hw_clks, + .hw_clks = &sun50i_a64_de2_hw_clks, - .resets = sun50i_a64_de2_resets, - .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets), -}; - -static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = { - .ccu_clks = sun50i_h6_de3_clks, - .num_ccu_clks = ARRAY_SIZE(sun50i_h6_de3_clks), - - .hw_clks = &sun50i_h6_de3_hw_clks, - - .resets = sun50i_h6_de3_resets, - .num_resets = ARRAY_SIZE(sun50i_h6_de3_resets), + .resets = sun8i_a83t_de2_resets, + .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets), }; static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = { @@ -249,6 +258,26 @@ static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = { .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets), }; +static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = { + .ccu_clks = sun50i_a64_de2_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_a64_de2_clks), + + .hw_clks = &sun50i_a64_de2_hw_clks, + + .resets = sun50i_a64_de2_resets, + .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets), +}; + +static const struct sunxi_ccu_desc sun50i_h5_de2_clk_desc = { + .ccu_clks = sun8i_h3_de2_clks, + .num_ccu_clks = ARRAY_SIZE(sun8i_h3_de2_clks), + + .hw_clks = &sun8i_h3_de2_hw_clks, + + .resets = sun50i_h5_de2_resets, + .num_resets = ARRAY_SIZE(sun50i_h5_de2_resets), +}; + static int sunxi_de2_clk_probe(struct platform_device *pdev) { struct resource *res; @@ -338,6 +367,10 @@ static const struct of_device_id sunxi_de2_clk_ids[] = { .data = &sun8i_h3_de2_clk_desc, }, { + .compatible = "allwinner,sun8i-r40-de2-clk", + .data = &sun8i_r40_de2_clk_desc, + }, + { .compatible = "allwinner,sun8i-v3s-de2-clk", .data = &sun8i_v3s_de2_clk_desc, }, @@ -347,11 +380,11 @@ static const struct of_device_id sunxi_de2_clk_ids[] = { }, { .compatible = "allwinner,sun50i-h5-de2-clk", - .data = &sun50i_a64_de2_clk_desc, + .data = &sun50i_h5_de2_clk_desc, }, { .compatible = "allwinner,sun50i-h6-de3-clk", - .data = &sun50i_h6_de3_clk_desc, + .data = &sun50i_h5_de2_clk_desc, }, { } }; diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index fe686f77787f..692be2fd9261 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -34,18 +34,6 @@ #define INTEGRATOR_AP_PCI_25_33_MHZ BIT(8) /** - * enum icst_control_type - the type of ICST control register - */ -enum icst_control_type { - ICST_VERSATILE, /* The standard type, all control bits available */ - ICST_INTEGRATOR_AP_CM, /* Only 8 bits of VDW available */ - ICST_INTEGRATOR_AP_SYS, /* Only 8 bits of VDW available */ - ICST_INTEGRATOR_AP_PCI, /* Odd bit pattern storage */ - ICST_INTEGRATOR_CP_CM_CORE, /* Only 8 bits of VDW and 3 bits of OD */ - ICST_INTEGRATOR_CP_CM_MEM, /* Only 8 bits of VDW and 3 bits of OD */ -}; - -/** * struct clk_icst - ICST VCO clock wrapper * @hw: corresponding clock hardware entry * @vcoreg: VCO register address @@ -344,12 +332,12 @@ static const struct clk_ops icst_ops = { .set_rate = icst_set_rate, }; -static struct clk *icst_clk_setup(struct device *dev, - const struct clk_icst_desc *desc, - const char *name, - const char *parent_name, - struct regmap *map, - enum icst_control_type ctype) +struct clk *icst_clk_setup(struct device *dev, + const struct clk_icst_desc *desc, + const char *name, + const char *parent_name, + struct regmap *map, + enum icst_control_type ctype) { struct clk *clk; struct clk_icst *icst; @@ -386,6 +374,7 @@ static struct clk *icst_clk_setup(struct device *dev, return clk; } +EXPORT_SYMBOL_GPL(icst_clk_setup); struct clk *icst_clk_register(struct device *dev, const struct clk_icst_desc *desc, diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h index e36ca1a20e90..1a119ef11066 100644 --- a/drivers/clk/versatile/clk-icst.h +++ b/drivers/clk/versatile/clk-icst.h @@ -1,4 +1,19 @@ /* SPDX-License-Identifier: GPL-2.0 */ +struct regmap; + +/** + * enum icst_control_type - the type of ICST control register + */ +enum icst_control_type { + ICST_VERSATILE, /* The standard type, all control bits available */ + ICST_INTEGRATOR_AP_CM, /* Only 8 bits of VDW available */ + ICST_INTEGRATOR_AP_SYS, /* Only 8 bits of VDW available */ + ICST_INTEGRATOR_AP_PCI, /* Odd bit pattern storage */ + ICST_INTEGRATOR_CP_CM_CORE, /* Only 8 bits of VDW and 3 bits of OD */ + ICST_INTEGRATOR_CP_CM_MEM, /* Only 8 bits of VDW and 3 bits of OD */ + ICST_INTEGRATOR_IM_PD1, /* Like the Versatile, all control bits */ +}; + /** * struct clk_icst_desc - descriptor for the ICST VCO * @params: ICST parameters @@ -17,3 +32,10 @@ struct clk *icst_clk_register(struct device *dev, const char *name, const char *parent_name, void __iomem *base); + +struct clk *icst_clk_setup(struct device *dev, + const struct clk_icst_desc *desc, + const char *name, + const char *parent_name, + struct regmap *map, + enum icst_control_type ctype); diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c index 1991f15a5db9..b05da8516d4c 100644 --- a/drivers/clk/versatile/clk-impd1.c +++ b/drivers/clk/versatile/clk-impd1.c @@ -7,7 +7,11 @@ #include <linux/clkdev.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/platform_data/clk-integrator.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include "icst.h" #include "clk-icst.h" @@ -175,3 +179,78 @@ void integrator_impd1_clk_exit(unsigned int id) kfree(imc->pclkname); } EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit); + +static int integrator_impd1_clk_spawn(struct device *dev, + struct device_node *parent, + struct device_node *np) +{ + struct regmap *map; + struct clk *clk = ERR_PTR(-EINVAL); + const char *name = np->name; + const char *parent_name; + const struct clk_icst_desc *desc; + int ret; + + map = syscon_node_to_regmap(parent); + if (IS_ERR(map)) { + pr_err("no regmap for syscon IM-PD1 ICST clock parent\n"); + return PTR_ERR(map); + } + + if (of_device_is_compatible(np, "arm,impd1-vco1")) { + desc = &impd1_icst1_desc; + } else if (of_device_is_compatible(np, "arm,impd1-vco2")) { + desc = &impd1_icst2_desc; + } else { + dev_err(dev, "not a clock node %s\n", name); + return -ENODEV; + } + + parent_name = of_clk_get_parent_name(np, 0); + clk = icst_clk_setup(NULL, desc, name, parent_name, map, + ICST_INTEGRATOR_IM_PD1); + if (!IS_ERR(clk)) { + of_clk_add_provider(np, of_clk_src_simple_get, clk); + ret = 0; + } else { + dev_err(dev, "error setting up IM-PD1 ICST clock\n"); + ret = PTR_ERR(clk); + } + + return ret; +} + +static int integrator_impd1_clk_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child; + int ret = 0; + + for_each_available_child_of_node(np, child) { + ret = integrator_impd1_clk_spawn(dev, np, child); + if (ret) + break; + } + + return ret; +} + +static const struct of_device_id impd1_syscon_match[] = { + { .compatible = "arm,im-pd1-syscon", }, + {} +}; +MODULE_DEVICE_TABLE(of, impd1_syscon_match); + +static struct platform_driver impd1_clk_driver = { + .driver = { + .name = "impd1-clk", + .of_match_table = impd1_syscon_match, + }, + .probe = integrator_impd1_clk_probe, +}; +builtin_platform_driver(impd1_clk_driver); + +MODULE_AUTHOR("Linus Walleij <[email protected]>"); +MODULE_DESCRIPTION("Arm IM-PD1 module clock driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h index 0837c1a7ae49..b0d65d73db96 100644 --- a/include/dt-bindings/clock/g12a-clkc.h +++ b/include/dt-bindings/clock/g12a-clkc.h @@ -143,5 +143,7 @@ #define CLKID_CPU1_CLK 253 #define CLKID_CPU2_CLK 254 #define CLKID_CPU3_CLK 255 +#define CLKID_SPICC0_SCLK 258 +#define CLKID_SPICC1_SCLK 261 #endif /* __G12A_CLKC_H */ diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index db0763e96173..4073eb7a9da1 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -146,5 +146,6 @@ #define CLKID_CTS_VDAC 201 #define CLKID_HDMI_TX 202 #define CLKID_HDMI 205 +#define CLKID_ACODEC 206 #endif /* __GXBB_CLKC_H */ diff --git a/include/dt-bindings/clock/marvell,mmp2.h b/include/dt-bindings/clock/marvell,mmp2.h index 4b1a7724f20d..06bb7fe4c62f 100644 --- a/include/dt-bindings/clock/marvell,mmp2.h +++ b/include/dt-bindings/clock/marvell,mmp2.h @@ -26,6 +26,9 @@ #define MMP2_CLK_VCTCXO_4 25 #define MMP2_CLK_UART_PLL 26 #define MMP2_CLK_USB_PLL 27 +#define MMP3_CLK_PLL1_P 28 +#define MMP3_CLK_PLL2_P 29 +#define MMP3_CLK_PLL3 30 /* apb periphrals */ #define MMP2_CLK_TWSI0 60 @@ -50,6 +53,10 @@ #define MMP2_CLK_SSP2 79 #define MMP2_CLK_SSP3 80 #define MMP2_CLK_TIMER 81 +#define MMP2_CLK_THERMAL0 82 +#define MMP3_CLK_THERMAL1 83 +#define MMP3_CLK_THERMAL2 84 +#define MMP3_CLK_THERMAL3 85 /* axi periphrals */ #define MMP2_CLK_SDH0 101 @@ -74,6 +81,12 @@ #define MMP2_CLK_DISP0_LCDC 120 #define MMP2_CLK_USBHSIC0 121 #define MMP2_CLK_USBHSIC1 122 +#define MMP2_CLK_GPU_BUS 123 +#define MMP3_CLK_GPU_BUS MMP2_CLK_GPU_BUS +#define MMP2_CLK_GPU_3D 124 +#define MMP3_CLK_GPU_3D MMP2_CLK_GPU_3D +#define MMP3_CLK_GPU_2D 125 +#define MMP3_CLK_SDH4 126 #define MMP2_NR_CLKS 200 #endif diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h index e512a1c9b0fc..318eb15c414c 100644 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -131,7 +131,7 @@ #define CLK_AVS 109 #define CLK_HDMI 110 #define CLK_HDMI_DDC 111 - +#define CLK_MBUS 112 #define CLK_DSI_DPHY 113 #define CLK_GPU 114 |