diff options
| -rw-r--r-- | arch/arm64/boot/dts/freescale/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts | 376 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi | 73 |
3 files changed, 450 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index a19948739c0a..76d6b77172fb 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts new file mode 100644 index 000000000000..9f88583aa25e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2162A Clearfog +// +// Copyright 2023 Josua Mayer <[email protected]> + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" +#include "fsl-lx2162a-sr-som.dtsi" + +/ { + model = "SolidRun LX2162A Clearfog"; + compatible = "solidrun,lx2162a-clearfog", "solidrun,lx2162a-som", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + i2c0 = &i2c0; + i2c1 = &i2c2; + i2c2 = &i2c4; + i2c3 = &sfp_i2c0; + i2c4 = &sfp_i2c1; + i2c5 = &sfp_i2c2; + i2c6 = &sfp_i2c3; + i2c7 = &mpcie1_i2c; + i2c8 = &mpcie0_i2c; + i2c9 = &pcieclk_i2c; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_sfp_at: led-sfp-at { + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* PROC_IRQ5 */ + default-state = "off"; + }; + + led_sfp_ab: led-sfp-ab { + gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* PROC_IRQ11 */ + default-state = "off"; + }; + + led_sfp_bt: led-sfp-bt { + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; /* EVT1_B */ + default-state = "off"; + }; + + led_sfp_bb: led-sfp-bb { + gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* EVT2_B */ + default-state = "off"; + }; + }; + + sfp_at: sfp-at { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c0>; + mod-def0-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; /* EVT4_B */ + maximum-power-milliwatt = <2000>; + }; + + sfp_ab: sfp-ab { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c1>; + mod-def0-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; /* PROC_IRQ1 */ + maximum-power-milliwatt = <2000>; + }; + + sfp_bt: sfp-bt { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c2>; + mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* PROC_IRQ10 */ + maximum-power-milliwatt = <2000>; + }; + + sfp_bb: sfp-bb { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c3>; + mod-def0-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; /* EVT3_B */ + maximum-power-milliwatt = <2000>; + }; +}; + +&dpmac3 { + sfp = <&sfp_at>; + managed = "in-band-status"; + phys = <&serdes_1 7>; +}; + +&dpmac4 { + sfp = <&sfp_ab>; + managed = "in-band-status"; + phys = <&serdes_1 6>; +}; + +&dpmac5 { + sfp = <&sfp_bt>; + managed = "in-band-status"; + phys = <&serdes_1 5>; +}; + +&dpmac6 { + sfp = <&sfp_bb>; + managed = "in-band-status"; + phys = <&serdes_1 4>; +}; + +&dpmac11 { + phys = <&serdes_2 0>; + phy-handle = <ðernet_phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac12 { + phys = <&serdes_2 1>; + phy-handle = <ðernet_phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac13 { + phys = <&serdes_2 6>; + phy-handle = <ðernet_phy6>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac14 { + phys = <&serdes_2 7>; + phy-handle = <ðernet_phy8>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac15 { + phys = <&serdes_2 4>; + phy-handle = <ðernet_phy4>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac16 { + phys = <&serdes_2 5>; + phy-handle = <ðernet_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac17 { + /* override connection to on-SoM phy */ + /delete-property/ phy-handle; + /delete-property/ phy-connection-type; + + phys = <&serdes_2 2>; + phy-handle = <ðernet_phy5>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac18 { + phys = <&serdes_2 3>; + phy-handle = <ðernet_phy7>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&emdio1 { + ethernet_phy1: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + max-speed = <1000>; + }; + + ethernet_phy2: ethernet-phy@9 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <9>; + max-speed = <1000>; + }; + + ethernet_phy3: ethernet-phy@10 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <10>; + max-speed = <1000>; + }; + + ethernet_phy4: ethernet-phy@11 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <11>; + max-speed = <1000>; + }; + + ethernet_phy5: ethernet-phy@12 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <12>; + max-speed = <1000>; + }; + + ethernet_phy6: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <13>; + max-speed = <1000>; + }; + + ethernet_phy7: ethernet-phy@14 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <14>; + max-speed = <1000>; + }; + + ethernet_phy8: ethernet-phy@15 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <15>; + max-speed = <1000>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +ðernet_phy0 { + /* + * SoM has a phy at address 1 connected to SoC Ethernet Controller 1. + * It competes for WRIOP MAC17, and no connector has been wired. + */ + status = "disabled"; +}; + +&i2c2 { + status = "okay"; + + /* retimer@18 */ + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + sfp_i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfp_i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sfp_i2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sfp_i2c3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + mpcie1_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + mpcie0_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + pcieclk_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + /* clock-controller@6b */ + }; + }; +}; + +&pcie3 { + status = "disabled"; +}; + +&pcie4 { + status = "disabled"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio11 { + status = "okay"; +}; + +&pcs_mdio12 { + status = "okay"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&pcs_mdio15 { + status = "okay"; +}; + +&pcs_mdio16 { + status = "okay"; +}; + +&pcs_mdio17 { + status = "okay"; +}; + +&pcs_mdio18 { + status = "okay"; +}; + +&serdes_1 { + status = "okay"; +}; + +&serdes_2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi new file mode 100644 index 000000000000..0580ea30cfbc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2162A-SOM +// +// Copyright 2021 Rabeeh Khoury <[email protected]> +// Copyright 2023 Josua Mayer <[email protected]> + +&crypto { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <ðernet_phy0>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + ethernet_phy0: ethernet-phy@1 { + reg = <1>; + }; +}; + +&esdhc1 { + bus-width = <8>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + status = "okay"; +}; + +&fspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + +&i2c0 { + status = "okay"; + + fan-controller@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + }; + + ddr_spd: eeprom@51 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x51>; + read-only; + }; + + config_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c4 { + status = "okay"; + + variable_eeprom: eeprom@54 { + compatible = "st,24c2048", "atmel,24c2048"; + reg = <0x54>; + }; +}; |