diff options
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 75 | ||||
| -rw-r--r-- | Documentation/mm/slub.rst | 60 | ||||
| -rw-r--r-- | drivers/misc/lkdtm/heap.c | 2 | ||||
| -rw-r--r-- | mm/Kconfig.debug | 6 | ||||
| -rw-r--r-- | mm/slab.h | 10 | ||||
| -rw-r--r-- | mm/slab_common.c | 27 | ||||
| -rw-r--r-- | mm/slub.c | 78 | ||||
| -rw-r--r-- | tools/include/linux/slab.h | 1 |
8 files changed, 117 insertions, 142 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 31b3a25680d0..aefd68cec2e9 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3753,10 +3753,6 @@ no5lvl [X86-64,RISCV] Disable 5-level paging mode. Forces kernel to use 4-level paging instead. - noaliencache [MM, NUMA, SLAB] Disables the allocation of alien - caches in the slab allocator. Saves per-node memory, - but will impact performance. - noalign [KNL,ARM] noaltinstr [S390] Disables alternative instructions patching @@ -5895,65 +5891,58 @@ simeth= [IA-64] simscsi= - slram= [HW,MTD] - - slab_merge [MM] - Enable merging of slabs with similar size when the - kernel is built without CONFIG_SLAB_MERGE_DEFAULT. - - slab_nomerge [MM] - Disable merging of slabs with similar size. May be - necessary if there is some reason to distinguish - allocs to different slabs, especially in hardened - environments where the risk of heap overflows and - layout control by attackers can usually be - frustrated by disabling merging. This will reduce - most of the exposure of a heap attack to a single - cache (risks via metadata attacks are mostly - unchanged). Debug options disable merging on their - own. - For more information see Documentation/mm/slub.rst. - - slab_max_order= [MM, SLAB] - Determines the maximum allowed order for slabs. - A high setting may cause OOMs due to memory - fragmentation. Defaults to 1 for systems with - more than 32MB of RAM, 0 otherwise. - - slub_debug[=options[,slabs][;[options[,slabs]]...] [MM, SLUB] - Enabling slub_debug allows one to determine the + slab_debug[=options[,slabs][;[options[,slabs]]...] [MM] + Enabling slab_debug allows one to determine the culprit if slab objects become corrupted. Enabling - slub_debug can create guard zones around objects and + slab_debug can create guard zones around objects and may poison objects when not in use. Also tracks the last alloc / free. For more information see Documentation/mm/slub.rst. + (slub_debug legacy name also accepted for now) - slub_max_order= [MM, SLUB] + slab_max_order= [MM] Determines the maximum allowed order for slabs. A high setting may cause OOMs due to memory fragmentation. For more information see Documentation/mm/slub.rst. + (slub_max_order legacy name also accepted for now) + + slab_merge [MM] + Enable merging of slabs with similar size when the + kernel is built without CONFIG_SLAB_MERGE_DEFAULT. + (slub_merge legacy name also accepted for now) - slub_min_objects= [MM, SLUB] + slab_min_objects= [MM] The minimum number of objects per slab. SLUB will - increase the slab order up to slub_max_order to + increase the slab order up to slab_max_order to generate a sufficiently large slab able to contain the number of objects indicated. The higher the number of objects the smaller the overhead of tracking slabs and the less frequently locks need to be acquired. For more information see Documentation/mm/slub.rst. + (slub_min_objects legacy name also accepted for now) - slub_min_order= [MM, SLUB] + slab_min_order= [MM] Determines the minimum page order for slabs. Must be - lower than slub_max_order. - For more information see Documentation/mm/slub.rst. + lower or equal to slab_max_order. For more information see + Documentation/mm/slub.rst. + (slub_min_order legacy name also accepted for now) - slub_merge [MM, SLUB] - Same with slab_merge. + slab_nomerge [MM] + Disable merging of slabs with similar size. May be + necessary if there is some reason to distinguish + allocs to different slabs, especially in hardened + environments where the risk of heap overflows and + layout control by attackers can usually be + frustrated by disabling merging. This will reduce + most of the exposure of a heap attack to a single + cache (risks via metadata attacks are mostly + unchanged). Debug options disable merging on their + own. + For more information see Documentation/mm/slub.rst. + (slub_nomerge legacy name also accepted for now) - slub_nomerge [MM, SLUB] - Same with slab_nomerge. This is supported for legacy. - See slab_nomerge for more information. + slram= [HW,MTD] smart2= [HW] Format: <io1>[,<io2>[,...,<io8>]] diff --git a/Documentation/mm/slub.rst b/Documentation/mm/slub.rst index be75971532f5..b517ee28a955 100644 --- a/Documentation/mm/slub.rst +++ b/Documentation/mm/slub.rst @@ -9,7 +9,7 @@ SLUB can enable debugging only for selected slabs in order to avoid an impact on overall system performance which may make a bug more difficult to find. -In order to switch debugging on one can add an option ``slub_debug`` +In order to switch debugging on one can add an option ``slab_debug`` to the kernel command line. That will enable full debugging for all slabs. @@ -26,16 +26,16 @@ be enabled on the command line. F.e. no tracking information will be available without debugging on and validation can only partially be performed if debugging was not switched on. -Some more sophisticated uses of slub_debug: +Some more sophisticated uses of slab_debug: ------------------------------------------- -Parameters may be given to ``slub_debug``. If none is specified then full +Parameters may be given to ``slab_debug``. If none is specified then full debugging is enabled. Format: -slub_debug=<Debug-Options> +slab_debug=<Debug-Options> Enable options for all slabs -slub_debug=<Debug-Options>,<slab name1>,<slab name2>,... +slab_debug=<Debug-Options>,<slab name1>,<slab name2>,... Enable options only for select slabs (no spaces after a comma) @@ -60,23 +60,23 @@ Possible debug options are:: F.e. in order to boot just with sanity checks and red zoning one would specify:: - slub_debug=FZ + slab_debug=FZ Trying to find an issue in the dentry cache? Try:: - slub_debug=,dentry + slab_debug=,dentry to only enable debugging on the dentry cache. You may use an asterisk at the end of the slab name, in order to cover all slabs with the same prefix. For example, here's how you can poison the dentry cache as well as all kmalloc slabs:: - slub_debug=P,kmalloc-*,dentry + slab_debug=P,kmalloc-*,dentry Red zoning and tracking may realign the slab. We can just apply sanity checks to the dentry cache with:: - slub_debug=F,dentry + slab_debug=F,dentry Debugging options may require the minimum possible slab order to increase as a result of storing the metadata (for example, caches with PAGE_SIZE object @@ -84,20 +84,20 @@ sizes). This has a higher liklihood of resulting in slab allocation errors in low memory situations or if there's high fragmentation of memory. To switch off debugging for such caches by default, use:: - slub_debug=O + slab_debug=O You can apply different options to different list of slab names, using blocks of options. This will enable red zoning for dentry and user tracking for kmalloc. All other slabs will not get any debugging enabled:: - slub_debug=Z,dentry;U,kmalloc-* + slab_debug=Z,dentry;U,kmalloc-* You can also enable options (e.g. sanity checks and poisoning) for all caches except some that are deemed too performance critical and don't need to be debugged by specifying global debug options followed by a list of slab names with "-" as options:: - slub_debug=FZ;-,zs_handle,zspage + slab_debug=FZ;-,zs_handle,zspage The state of each debug option for a slab can be found in the respective files under:: @@ -105,7 +105,7 @@ under:: /sys/kernel/slab/<slab name>/ If the file contains 1, the option is enabled, 0 means disabled. The debug -options from the ``slub_debug`` parameter translate to the following files:: +options from the ``slab_debug`` parameter translate to the following files:: F sanity_checks Z red_zone @@ -129,7 +129,7 @@ in order to reduce overhead and increase cache hotness of objects. Slab validation =============== -SLUB can validate all object if the kernel was booted with slub_debug. In +SLUB can validate all object if the kernel was booted with slab_debug. In order to do so you must have the ``slabinfo`` tool. Then you can do :: @@ -150,29 +150,29 @@ list_lock once in a while to deal with partial slabs. That overhead is governed by the order of the allocation for each slab. The allocations can be influenced by kernel parameters: -.. slub_min_objects=x (default 4) -.. slub_min_order=x (default 0) -.. slub_max_order=x (default 3 (PAGE_ALLOC_COSTLY_ORDER)) +.. slab_min_objects=x (default: automatically scaled by number of cpus) +.. slab_min_order=x (default 0) +.. slab_max_order=x (default 3 (PAGE_ALLOC_COSTLY_ORDER)) -``slub_min_objects`` +``slab_min_objects`` allows to specify how many objects must at least fit into one slab in order for the allocation order to be acceptable. In general slub will be able to perform this number of allocations on a slab without consulting centralized resources (list_lock) where contention may occur. -``slub_min_order`` +``slab_min_order`` specifies a minimum order of slabs. A similar effect like - ``slub_min_objects``. + ``slab_min_objects``. -``slub_max_order`` - specified the order at which ``slub_min_objects`` should no +``slab_max_order`` + specified the order at which ``slab_min_objects`` should no longer be checked. This is useful to avoid SLUB trying to - generate super large order pages to fit ``slub_min_objects`` + generate super large order pages to fit ``slab_min_objects`` of a slab cache with large object sizes into one high order page. Setting command line parameter ``debug_guardpage_minorder=N`` (N > 0), forces setting - ``slub_max_order`` to 0, what cause minimum possible order of + ``slab_max_order`` to 0, what cause minimum possible order of slabs allocation. SLUB Debug output @@ -219,7 +219,7 @@ Here is a sample of slub debug output:: FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc If SLUB encounters a corrupted object (full detection requires the kernel -to be booted with slub_debug) then the following output will be dumped +to be booted with slab_debug) then the following output will be dumped into the syslog: 1. Description of the problem encountered @@ -239,7 +239,7 @@ into the syslog: pid=<pid of the process> (Object allocation / free information is only available if SLAB_STORE_USER is - set for the slab. slub_debug sets that option) + set for the slab. slab_debug sets that option) 2. The object contents if an object was involved. @@ -262,7 +262,7 @@ into the syslog: the object boundary. (Redzone information is only available if SLAB_RED_ZONE is set. - slub_debug sets that option) + slab_debug sets that option) Padding <address> : <bytes> Unused data to fill up the space in order to get the next object @@ -296,7 +296,7 @@ Emergency operations Minimal debugging (sanity checks alone) can be enabled by booting with:: - slub_debug=F + slab_debug=F This will be generally be enough to enable the resiliency features of slub which will keep the system running even if a bad kernel component will @@ -311,13 +311,13 @@ and enabling debugging only for that cache I.e.:: - slub_debug=F,dentry + slab_debug=F,dentry If the corruption occurs by writing after the end of the object then it may be advisable to enable a Redzone to avoid corrupting the beginning of other objects:: - slub_debug=FZ,dentry + slab_debug=FZ,dentry Extended slabinfo mode and plotting =================================== diff --git a/drivers/misc/lkdtm/heap.c b/drivers/misc/lkdtm/heap.c index 4f467d3972a6..b1b316f99703 100644 --- a/drivers/misc/lkdtm/heap.c +++ b/drivers/misc/lkdtm/heap.c @@ -48,7 +48,7 @@ static void lkdtm_VMALLOC_LINEAR_OVERFLOW(void) * correctly. * * This should get caught by either memory tagging, KASan, or by using - * CONFIG_SLUB_DEBUG=y and slub_debug=ZF (or CONFIG_SLUB_DEBUG_ON=y). + * CONFIG_SLUB_DEBUG=y and slab_debug=ZF (or CONFIG_SLUB_DEBUG_ON=y). */ static void lkdtm_SLAB_LINEAR_OVERFLOW(void) { diff --git a/mm/Kconfig.debug b/mm/Kconfig.debug index 321ab379994f..afc72fde0f03 100644 --- a/mm/Kconfig.debug +++ b/mm/Kconfig.debug @@ -64,11 +64,11 @@ config SLUB_DEBUG_ON help Boot with debugging on by default. SLUB boots by default with the runtime debug capabilities switched off. Enabling this is - equivalent to specifying the "slub_debug" parameter on boot. + equivalent to specifying the "slab_debug" parameter on boot. There is no support for more fine grained debug control like - possible with slub_debug=xxx. SLUB debugging may be switched + possible with slab_debug=xxx. SLUB debugging may be switched off in a kernel built with CONFIG_SLUB_DEBUG_ON by specifying - "slub_debug=-". + "slab_debug=-". config PAGE_OWNER bool "Track page owner" diff --git a/mm/slab.h b/mm/slab.h index 54deeb0428c6..16c343942456 100644 --- a/mm/slab.h +++ b/mm/slab.h @@ -363,7 +363,6 @@ static inline int objs_per_slab(const struct kmem_cache *cache, enum slab_state { DOWN, /* No slab functionality yet */ PARTIAL, /* SLUB: kmem_cache_node available */ - PARTIAL_NODE, /* SLAB: kmalloc size for node struct available */ UP, /* Slab caches usable but not all extras yet */ FULL /* Everything is working */ }; @@ -387,7 +386,7 @@ extern const struct kmalloc_info_struct { /* Kmalloc array related functions */ void setup_kmalloc_cache_index_table(void); -void create_kmalloc_caches(slab_flags_t); +void create_kmalloc_caches(void); extern u8 kmalloc_size_index[24]; @@ -422,8 +421,6 @@ gfp_t kmalloc_fix_flags(gfp_t flags); int __kmem_cache_create(struct kmem_cache *, slab_flags_t flags); void __init kmem_cache_init(void); -void __init new_kmalloc_cache(int idx, enum kmalloc_cache_type type, - slab_flags_t flags); extern void create_boot_cache(struct kmem_cache *, const char *name, unsigned int size, slab_flags_t flags, unsigned int useroffset, unsigned int usersize); @@ -435,8 +432,7 @@ struct kmem_cache * __kmem_cache_alias(const char *name, unsigned int size, unsigned int align, slab_flags_t flags, void (*ctor)(void *)); -slab_flags_t kmem_cache_flags(unsigned int object_size, - slab_flags_t flags, const char *name); +slab_flags_t kmem_cache_flags(slab_flags_t flags, const char *name); static inline bool is_kmalloc_cache(struct kmem_cache *s) { @@ -528,7 +524,7 @@ static inline bool __slub_debug_enabled(void) #endif /* - * Returns true if any of the specified slub_debug flags is enabled for the + * Returns true if any of the specified slab_debug flags is enabled for the * cache. Use only for flags parsed by setup_slub_debug() as it also enables * the static key. */ diff --git a/mm/slab_common.c b/mm/slab_common.c index 238293b1dbe1..7d60cfc2b30f 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -172,7 +172,7 @@ struct kmem_cache *find_mergeable(unsigned int size, unsigned int align, size = ALIGN(size, sizeof(void *)); align = calculate_alignment(flags, align, size); size = ALIGN(size, align); - flags = kmem_cache_flags(size, flags, name); + flags = kmem_cache_flags(flags, name); if (flags & SLAB_NEVER_MERGE) return NULL; @@ -282,7 +282,7 @@ kmem_cache_create_usercopy(const char *name, #ifdef CONFIG_SLUB_DEBUG /* - * If no slub_debug was enabled globally, the static key is not yet + * If no slab_debug was enabled globally, the static key is not yet * enabled by setup_slub_debug(). Enable it if the cache is being * created with any of the debugging flags passed explicitly. * It's also possible that this is the first cache created with @@ -404,8 +404,12 @@ EXPORT_SYMBOL(kmem_cache_create); */ static void kmem_cache_release(struct kmem_cache *s) { - sysfs_slab_unlink(s); - sysfs_slab_release(s); + if (slab_state >= FULL) { + sysfs_slab_unlink(s); + sysfs_slab_release(s); + } else { + slab_kmem_cache_release(s); + } } #else static void kmem_cache_release(struct kmem_cache *s) @@ -766,7 +770,7 @@ EXPORT_SYMBOL(kmalloc_size_roundup); } /* - * kmalloc_info[] is to make slub_debug=,kmalloc-xx option work at boot time. + * kmalloc_info[] is to make slab_debug=,kmalloc-xx option work at boot time. * kmalloc_index() supports up to 2^21=2MB, so the final entry of the table is * kmalloc-2M. */ @@ -853,9 +857,10 @@ static unsigned int __kmalloc_minalign(void) return max(minalign, arch_slab_minalign()); } -void __init -new_kmalloc_cache(int idx, enum kmalloc_cache_type type, slab_flags_t flags) +static void __init +new_kmalloc_cache(int idx, enum kmalloc_cache_type type) { + slab_flags_t flags = 0; unsigned int minalign = __kmalloc_minalign(); unsigned int aligned_size = kmalloc_info[idx].size; int aligned_idx = idx; @@ -902,7 +907,7 @@ new_kmalloc_cache(int idx, enum kmalloc_cache_type type, slab_flags_t flags) * may already have been created because they were needed to * enable allocations for slab creation. */ -void __init create_kmalloc_caches(slab_flags_t flags) +void __init create_kmalloc_caches(void) { int i; enum kmalloc_cache_type type; @@ -913,7 +918,7 @@ void __init create_kmalloc_caches(slab_flags_t flags) for (type = KMALLOC_NORMAL; type < NR_KMALLOC_TYPES; type++) { for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++) { if (!kmalloc_caches[type][i]) - new_kmalloc_cache(i, type, flags); + new_kmalloc_cache(i, type); /* * Caches that are not of the two-to-the-power-of size. @@ -922,10 +927,10 @@ void __init create_kmalloc_caches(slab_flags_t flags) */ if (KMALLOC_MIN_SIZE <= 32 && i == 6 && !kmalloc_caches[type][1]) - new_kmalloc_cache(1, type, flags); + new_kmalloc_cache(1, type); if (KMALLOC_MIN_SIZE <= 64 && i == 7 && !kmalloc_caches[type][2]) - new_kmalloc_cache(2, type, flags); + new_kmalloc_cache(2, type); } } #ifdef CONFIG_RANDOM_KMALLOC_CACHES diff --git a/mm/slub.c b/mm/slub.c index 7f235fa6592d..5feb1776a130 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -295,7 +295,7 @@ static inline bool kmem_cache_has_cpu_partial(struct kmem_cache *s) /* * Debugging flags that require metadata to be stored in the slab. These get - * disabled when slub_debug=O is used and a cache's min order increases with + * disabled when slab_debug=O is used and a cache's min order increases with * metadata. */ #define DEBUG_METADATA_FLAGS (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER) @@ -391,7 +391,7 @@ struct kmem_cache_cpu { }; struct slab *slab; /* The slab from which we are allocating */ #ifdef CONFIG_SLUB_CPU_PARTIAL - struct slab *partial; /* Partially allocated frozen slabs */ + struct slab *partial; /* Partially allocated slabs */ #endif local_lock_t lock; /* Protects the fields above */ #ifdef CONFIG_SLUB_STATS @@ -1498,16 +1498,8 @@ static inline void inc_slabs_node(struct kmem_cache *s, int node, int objects) { struct kmem_cache_node *n = get_node(s, node); - /* - * May be called early in order to allocate a slab for the - * kmem_cache_node structure. Solve the chicken-egg - * dilemma by deferring the increment of the count during - * bootstrap (see early_kmem_cache_node_alloc). - */ - if (likely(n)) { - atomic_long_inc(&n->nr_slabs); - atomic_long_add(objects, &n->total_objects); - } + atomic_long_inc(&n->nr_slabs); + atomic_long_add(objects, &n->total_objects); } static inline void dec_slabs_node(struct kmem_cache *s, int node, int objects) { @@ -1616,7 +1608,7 @@ static inline int free_consistency_checks(struct kmem_cache *s, } /* - * Parse a block of slub_debug options. Blocks are delimited by ';' + * Parse a block of slab_debug options. Blocks are delimited by ';' * * @str: start of block * @flags: returns parsed flags, or DEBUG_DEFAULT_FLAGS if none specified @@ -1677,7 +1669,7 @@ parse_slub_debug_flags(char *str, slab_flags_t *flags, char **slabs, bool init) break; default: if (init) - pr_err("slub_debug option '%c' unknown. skipped\n", *str); + pr_err("slab_debug option '%c' unknown. skipped\n", *str); } } check_slabs: @@ -1736,7 +1728,7 @@ static int __init setup_slub_debug(char *str) /* * For backwards compatibility, a single list of flags with list of * slabs means debugging is only changed for those slabs, so the global - * slub_debug should be unchanged (0 or DEBUG_DEFAULT_FLAGS, depending + * slab_debug should be unchanged (0 or DEBUG_DEFAULT_FLAGS, depending * on CONFIG_SLUB_DEBUG_ON). We can extended that to multiple lists as * long as there is no option specifying flags without a slab list. */ @@ -1760,21 +1752,20 @@ out: return 1; } -__setup("slub_debug", setup_slub_debug); +__setup("slab_debug", setup_slub_debug); +__setup_param("slub_debug", slub_debug, setup_slub_debug, 0); /* * kmem_cache_flags - apply debugging options to the cache - * @object_size: the size of an object without meta data * @flags: flags to set * @name: name of the cache * * Debug option(s) are applied to @flags. In addition to the debug * option(s), if a slab name (or multiple) is specified i.e. - * slub_debug=<Debug-Options>,<slab name1>,<slab name2> ... + * slab_debug=<Debug-Options>,<slab name1>,<slab name2> ... * then only the select slabs will receive the debug option(s). */ -slab_flags_t kmem_cache_flags(unsigned int object_size, - slab_flags_t flags, const char *name) +slab_flags_t kmem_cache_flags(slab_flags_t flags, const char *name) { char *iter; size_t len; @@ -1850,8 +1841,7 @@ static inline void add_full(struct kmem_cache *s, struct kmem_cache_node *n, struct slab *slab) {} static inline void remove_full(struct kmem_cache *s, struct kmem_cache_node *n, struct slab *slab) {} -slab_flags_t kmem_cache_flags(unsigned int object_size, - slab_flags_t flags, const char *name) +slab_flags_t kmem_cache_flags(slab_flags_t flags, const char *name) { return flags; } @@ -2038,11 +2028,6 @@ void memcg_slab_alloc_error_hook(struct kmem_cache *s, int objects, obj_cgroup_uncharge(objcg, objects * obj_full_size(s)); } #else /* CONFIG_MEMCG_KMEM */ -static inline struct mem_cgroup *memcg_from_slab_obj(void *ptr) -{ - return NULL; -} - static inline void memcg_free_slab_cgroups(struct slab *slab) { } @@ -3262,7 +3247,7 @@ slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid) oo_order(s->min)); if (oo_order(s->min) > get_order(s->object_size)) - pr_warn(" %s debugging increased min order, use slub_debug=O to disable.\n", + pr_warn(" %s debugging increased min order, use slab_debug=O to disable.\n", s->name); for_each_kmem_cache_node(s, node, n) { @@ -3792,11 +3777,11 @@ void slab_post_alloc_hook(struct kmem_cache *s, struct obj_cgroup *objcg, zero_size = orig_size; /* - * When slub_debug is enabled, avoid memory initialization integrated + * When slab_debug is enabled, avoid memory initialization integrated * into KASAN and instead zero out the memory via the memset below with * the proper size. Otherwise, KASAN might overwrite SLUB redzones and * cause false-positive reports. This does not lead to a performance - * penalty on production builds, as slub_debug is not intended to be + * penalty on production builds, as slab_debug is not intended to be * enabled there. */ if (__slub_debug_enabled()) @@ -4698,8 +4683,8 @@ static unsigned int slub_min_objects; * activity on the partial lists which requires taking the list_lock. This is * less a concern for large slabs though which are rarely used. * - * slub_max_order specifies the order where we begin to stop considering the - * number of objects in a slab as critical. If we reach slub_max_order then + * slab_max_order specifies the order where we begin to stop considering the + * number of objects in a slab as critical. If we reach slab_max_order then * we try to keep the page order as low as possible. So we accept more waste * of space in favor of a small page order. * @@ -4766,14 +4751,14 @@ static inline int calculate_order(unsigned int size) * and backing off gradually. * * We start with accepting at most 1/16 waste and try to find the - * smallest order from min_objects-derived/slub_min_order up to - * slub_max_order that will satisfy the constraint. Note that increasing + * smallest order from min_objects-derived/slab_min_order up to + * slab_max_order that will satisfy the constraint. Note that increasing * the order can only result in same or less fractional waste, not more. * * If that fails, we increase the acceptable fraction of waste and try * again. The last iteration with fraction of 1/2 would effectively * accept any waste and give us the order determined by min_objects, as - * long as at least single object fits within slub_max_order. + * long as at least single object fits within slab_max_order. */ for (unsigned int fraction = 16; fraction > 1; fraction /= 2) { order = calc_slab_order(size, min_order, slub_max_order, @@ -4783,7 +4768,7 @@ static inline int calculate_order(unsigned int size) } /* - * Doh this slab cannot be placed using slub_max_order. + * Doh this slab cannot be placed using slab_max_order. */ order = get_order(size); if (order <= MAX_PAGE_ORDER) @@ -4853,7 +4838,6 @@ static void early_kmem_cache_node_alloc(int node) slab = new_slab(kmem_cache_node, GFP_NOWAIT, node); BUG_ON(!slab); - inc_slabs_node(kmem_cache_node, slab_nid(slab), slab->objects); if (slab_nid(slab) != node) { pr_err("SLUB: Unable to allocate memory from node %d\n", node); pr_err("SLUB: Allocating a useless per node structure in order to be able to continue\n"); @@ -5100,7 +5084,7 @@ static int calculate_sizes(struct kmem_cache *s) static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags) { - s->flags = kmem_cache_flags(s->size, flags, s->name); + s->flags = kmem_cache_flags(flags, s->name); #ifdef CONFIG_SLAB_FREELIST_HARDENED s->random = get_random_long(); #endif @@ -5309,7 +5293,9 @@ static int __init setup_slub_min_order(char *str) return 1; } -__setup("slub_min_order=", setup_slub_min_order); +__setup("slab_min_order=", setup_slub_min_order); +__setup_param("slub_min_order=", slub_min_order, setup_slub_min_order, 0); + static int __init setup_slub_max_order(char *str) { @@ -5322,7 +5308,8 @@ static int __init setup_slub_max_order(char *str) return 1; } -__setup("slub_max_order=", setup_slub_max_order); +__setup("slab_max_order=", setup_slub_max_order); +__setup_param("slub_max_order=", slub_max_order, setup_slub_max_order, 0); static int __init setup_slub_min_objects(char *str) { @@ -5331,7 +5318,8 @@ static int __init setup_slub_min_objects(char *str) return 1; } -__setup("slub_min_objects=", setup_slub_min_objects); +__setup("slab_min_objects=", setup_slub_min_objects); +__setup_param("slub_min_objects=", slub_min_objects, setup_slub_min_objects, 0); #ifdef CONFIG_HARDENED_USERCOPY /* @@ -5659,7 +5647,7 @@ void __init kmem_cache_init(void) /* Now we can use the kmem_cache to allocate kmalloc slabs */ setup_kmalloc_cache_index_table(); - create_kmalloc_caches(0); + create_kmalloc_caches(); /* Setup random freelists for each cache */ init_freelist_randomization(); @@ -6788,14 +6776,12 @@ out_del_kobj: void sysfs_slab_unlink(struct kmem_cache *s) { - if (slab_state >= FULL) - kobject_del(&s->kobj); + kobject_del(&s->kobj); } void sysfs_slab_release(struct kmem_cache *s) { - if (slab_state >= FULL) - kobject_put(&s->kobj); + kobject_put(&s->kobj); } /* diff --git a/tools/include/linux/slab.h b/tools/include/linux/slab.h index 311759ea25e9..51b25e9c4ec7 100644 --- a/tools/include/linux/slab.h +++ b/tools/include/linux/slab.h @@ -18,7 +18,6 @@ bool slab_is_available(void); enum slab_state { DOWN, PARTIAL, - PARTIAL_NODE, UP, FULL }; |