diff options
| -rw-r--r-- | arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 79 | ||||
| -rw-r--r-- | arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 62 | ||||
| -rw-r--r-- | arch/arm/boot/dts/bcm5301x.dtsi | 31 | ||||
| -rw-r--r-- | arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 4 |
4 files changed, 127 insertions, 49 deletions
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index 448060561cd0..16dea851719f 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -68,8 +68,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; @@ -95,6 +93,83 @@ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; }; + + switch { + compatible = "realtek,rtl8365mb"; + /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ + mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + realtek,disable-leds; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + phy-handle = <ðphy0>; + }; + + port@1 { + reg = <1>; + label = "lan6"; + phy-handle = <ðphy1>; + }; + + port@2 { + reg = <2>; + label = "lan7"; + phy-handle = <ðphy2>; + }; + + port@3 { + reg = <3>; + label = "lan8"; + phy-handle = <ðphy3>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&sw0_p5>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + }; + }; }; &srab { diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index 64f973e1ef12..66c64a6ec414 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -84,40 +84,6 @@ max-brightness = <255>; }; }; - - i2c { - /* - * The platform provided I2C does not budge. - * This is a replacement until I can figure - * out what are the missing bits... - */ - - compatible = "i2c-gpio"; - sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <10>; /* close to 100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - current_sense: ina219@45 { - compatible = "ti,ina219"; - reg = <0x45>; - shunt-resistor = <60000>; /* = 60 mOhms */ - }; - - eeprom: eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - pagesize = <32>; - read-only; - #address-cells = <1>; - #size-cells = <1>; - - mac_address: mac-address@66 { - reg = <0x66 0x6>; - }; - }; - }; }; &uart0 { @@ -228,3 +194,31 @@ }; }; }; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c>; + + clock-frequency = <100000>; + + current_sense: ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index d4f355015e3c..588e57db6859 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -148,15 +148,6 @@ }; }; - usb2_phy: usb2-phy@1800c000 { - compatible = "brcm,ns-usb2-phy"; - reg = <0x1800c000 0x1000>; - reg-names = "dmu"; - #phy-cells = <0>; - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; - clock-names = "phy-ref-clk"; - }; - axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; @@ -421,14 +412,14 @@ #address-cells = <1>; #size-cells = <1>; - cru@100 { - compatible = "simple-bus"; + cru-bus@100 { + compatible = "brcm,ns-cru", "simple-mfd"; reg = <0x100 0x1a4>; ranges; #address-cells = <1>; #size-cells = <1>; - lcpll0: lcpll0@100 { + lcpll0: clock-controller@100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; reg = <0x100 0x14>; @@ -437,7 +428,7 @@ "sdio", "ddr_phy"; }; - genpll: genpll@140 { + genpll: clock-controller@140 { #clock-cells = <1>; compatible = "brcm,nsp-genpll"; reg = <0x140 0x24>; @@ -448,6 +439,20 @@ "sata1", "sata2"; }; + usb2_phy: phy@164 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x164 0x4>; + brcm,syscon-clkset = <&cru_clkset>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; + + cru_clkset: syscon@180 { + compatible = "brcm,cru-clkset", "syscon"; + reg = <0x180 0x4>; + }; + pinctrl: pin-controller@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi index 102acd85fab2..ba01054a76cf 100644 --- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi @@ -118,6 +118,8 @@ reg = <0>; ethernet = <&sgmii1>; phy-mode = "sgmii"; + qca,sgmii-enable-pll; + qca,sgmii-txclk-falling-edge; fixed-link { speed = <1000>; full-duplex; @@ -194,6 +196,8 @@ reg = <0>; ethernet = <&sgmii0>; phy-mode = "sgmii"; + qca,sgmii-enable-pll; + qca,sgmii-txclk-falling-edge; fixed-link { speed = <1000>; full-duplex; |