diff options
27 files changed, 449 insertions, 367 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt deleted file mode 100644 index ab730ea0a560..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ /dev/null @@ -1,313 +0,0 @@ -Broadcom iProc Family Clocks - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -The iProc clock controller manages clocks that are common to the iProc family. -An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, -LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL -comprises of several leaf clocks - -Required properties for a PLL and its leaf clocks: - -- compatible: - Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on -Cygnus has a compatible string of "brcm,cygnus-genpll" - -- #clock-cells: - Have a value of <1> since there are more than 1 leaf clock of a given PLL - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for the PLL - -- clocks: - The input parent clock phandle for the PLL. For most iProc PLLs, this is an -onboard crystal with a fixed rate - -- clock-output-names: - An ordered list of strings defining the names of the clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - genpll: genpll { - #clock-cells = <1>; - compatible = "brcm,cygnus-genpll"; - reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; - clocks = <&osc>; - clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", - "enet_sw", "audio_125", "can"; - }; - -Required properties for ASIU clocks: - -ASIU clocks are a special case. These clocks are derived directly from the -reference clock of the onboard crystal - -- compatible: - Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU -clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" - -- #clock-cells: - Have a value of <1> since there are more than 1 ASIU clocks - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for ASIU clocks - -- clocks: - The input parent clock phandle for the ASIU clock, i.e., the onboard -crystal - -- clock-output-names: - An ordered list of strings defining the names of the ASIU clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - asiu_clks: asiu_clks { - #clock-cells = <1>; - compatible = "brcm,cygnus-asiu-clk"; - reg = <0x0301d048 0xc>, <0x180aa024 0x4>; - clocks = <&osc>; - clock-output-names = "keypad", "adc/touch", "pwm"; - }; - -Cygnus ------- -PLL and leaf clock compatible strings for Cygnus are: - "brcm,cygnus-armpll" - "brcm,cygnus-genpll" - "brcm,cygnus-lcpll0" - "brcm,cygnus-mipipll" - "brcm,cygnus-asiu-clk" - "brcm,cygnus-audiopll" - -The following table defines the set of PLL/clock index and ID for Cygnus. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-cygnus.h" - - Clock Source (Parent) Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK - adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK - pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK - - genpll crystal 0 BCM_CYGNUS_GENPLL - axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK - 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK - ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK - enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK - audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK - can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK - - lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 - pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK - ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK - sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK - usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK - smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK - ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED - - mipipll crystal 0 BCM_CYGNUS_MIPIPLL - ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED - ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD - ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D - ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED - ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED - ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED - - audiopll crystal 0 BCM_CYGNUS_AUDIOPLL - ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 - ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 - ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 - -Hurricane 2 ------- -PLL and leaf clock compatible strings for Hurricane 2 are: - "brcm,hr2-armpll" - -The following table defines the set of PLL/clock for Hurricane 2: - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - -Northstar and Northstar Plus ------- -PLL and leaf clock compatible strings for Northstar and Northstar Plus are: - "brcm,nsp-armpll" - "brcm,nsp-genpll" - "brcm,nsp-lcpll0" - -The following table defines the set of PLL/clock index and ID for Northstar and -Northstar Plus. These clock IDs are defined in: - "include/dt-bindings/clock/bcm-nsp.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - genpll crystal 0 BCM_NSP_GENPLL - phy genpll 1 BCM_NSP_GENPLL_PHY_CLK - ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK - usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK - iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK - sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK - sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK - - lcpll0 crystal 0 BCM_NSP_LCPLL0 - pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK - sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK - ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK - -Northstar 2 ------------ -PLL and leaf clock compatible strings for Northstar 2 are: - "brcm,ns2-genpll-scr" - "brcm,ns2-genpll-sw" - "brcm,ns2-lcpll-ddr" - "brcm,ns2-lcpll-ports" - -The following table defines the set of PLL/clock index and ID for Northstar 2. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-ns2.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - genpll_scr crystal 0 BCM_NS2_GENPLL_SCR - scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK - fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK - audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK - ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED - ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED - ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED - - genpll_sw crystal 0 BCM_NS2_GENPLL_SW - rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK - 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK - nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK - chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK - port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK - sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK - - lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR - pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK - ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK - ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED - ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED - ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED - ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED - - lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS - wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK - rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK - ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED - ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED - ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED - ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED - -BCM63138 --------- -PLL and leaf clock compatible strings for BCM63138 are: - "brcm,bcm63138-armpll" - -Stingray ------------ -PLL and leaf clock compatible strings for Stingray are: - "brcm,sr-genpll0" - "brcm,sr-genpll1" - "brcm,sr-genpll2" - "brcm,sr-genpll3" - "brcm,sr-genpll4" - "brcm,sr-genpll5" - "brcm,sr-genpll6" - - "brcm,sr-lcpll0" - "brcm,sr-lcpll1" - "brcm,sr-lcpll-pcie" - - -The following table defines the set of PLL/clock index and ID for Stingray. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-sr.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - crmu_ref25m crystal N/A N/A - - genpll0 crystal 0 BCM_SR_GENPLL0 - clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK - clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK - clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK - clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK - clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK - clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK - - genpll1 crystal 0 BCM_SR_GENPLL1 - clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK - clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK - - genpll2 crystal 0 BCM_SR_GENPLL2 - clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK - clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK - clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK - clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK - clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK - clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK - - genpll3 crystal 0 BCM_SR_GENPLL3 - clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK - clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK - - genpll4 crystal 0 BCM_SR_GENPLL4 - clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK - clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK - clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK - clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK - clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK - - genpll5 crystal 0 BCM_SR_GENPLL5 - clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK - clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK - clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK - - genpll6 crystal 0 BCM_SR_GENPLL6 - clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK - - lcpll0 crystal 0 BCM_SR_LCPLL0 - clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK - clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK - clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK - clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK - - lcpll1 crystal 0 BCM_SR_LCPLL1 - clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK - clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK - clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK - - lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE - clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml new file mode 100644 index 000000000000..8dc7b404ee12 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml @@ -0,0 +1,395 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc Family Clocks + +maintainers: + - Ray Jui <[email protected]> + - Scott Branden <[email protected]> + +description: | + The iProc clock controller manages clocks that are common to the iProc family. + An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL, + LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL + comprises of several leaf clocks + + ASIU clocks are a special case. These clocks are derived directly from the + reference clock of the onboard crystal. + +properties: + compatible: + enum: + - brcm,bcm63138-armpll + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + - brcm,hr2-armpll + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + + reg: + minItems: 1 + maxItems: 3 + items: + - description: base register + - description: power register + - description: ASIU or split status register + + clocks: + description: The input parent clock phandle for the PLL / ASIU clock. For + most iProc PLLs, this is an onboard crystal with a fixed rate. + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-output-names: + minItems: 1 + maxItems: 45 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - brcm,cygnus-armpll + - brcm,cygnus-genpll + - brcm,cygnus-lcpll0 + - brcm,cygnus-mipipll + - brcm,cygnus-asiu-clk + - brcm,cygnus-audiopll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Cygnus. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source (Parent) Index ID + ----- --------------- ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + genpll crystal 0 BCM_CYGNUS_GENPLL + axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK + + lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 + pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + mipipll crystal 0 BCM_CYGNUS_MIPIPLL + ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D + ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED + + audiopll crystal 0 BCM_CYGNUS_AUDIOPLL + ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 + ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 + ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 + - if: + properties: + compatible: + contains: + enum: + - brcm,hr2-armpll + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + - if: + properties: + compatible: + contains: + enum: + - brcm,nsp-armpll + - brcm,nsp-genpll + - brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar and + Northstar Plus. These clock IDs are defined in: + "include/dt-bindings/clock/bcm-nsp.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + genpll crystal 0 BCM_NSP_GENPLL + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK + + lcpll0 crystal 0 BCM_NSP_LCPLL0 + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK + - if: + properties: + compatible: + contains: + enum: + - brcm,ns2-genpll-scr + - brcm,ns2-genpll-sw + - brcm,ns2-lcpll-ddr + - brcm,ns2-lcpll-ports + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Northstar 2. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-ns2.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + + genpll_scr crystal 0 BCM_NS2_GENPLL_SCR + scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK + fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK + audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK + ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED + ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED + ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED + + genpll_sw crystal 0 BCM_NS2_GENPLL_SW + rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK + 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK + nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK + chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK + port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK + sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK + + lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR + pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK + ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK + ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED + ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED + ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED + ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED + + lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS + wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK + rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK + ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED + ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED + ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED + ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED + - if: + properties: + compatible: + contains: + enum: + - brcm,sr-genpll0 + - brcm,sr-genpll1 + - brcm,sr-genpll2 + - brcm,sr-genpll3 + - brcm,sr-genpll4 + - brcm,sr-genpll5 + - brcm,sr-genpll6 + - brcm,sr-lcpll0 + - brcm,sr-lcpll1 + - brcm,sr-lcpll-pcie + then: + properties: + clock-output-names: + description: | + The following table defines the set of PLL/clock index and ID for Stingray. + These clock IDs are defined in: + "include/dt-bindings/clock/bcm-sr.h" + + Clock Source Index ID + ----- ------ ----- -- + crystal N/A N/A N/A + crmu_ref25m crystal N/A N/A + + genpll0 crystal 0 BCM_SR_GENPLL0 + clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK + clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK + clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK + clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK + clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK + clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK + + genpll1 crystal 0 BCM_SR_GENPLL1 + clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK + clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK + + genpll2 crystal 0 BCM_SR_GENPLL2 + clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK + clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK + clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK + clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK + clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK + clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK + + genpll3 crystal 0 BCM_SR_GENPLL3 + clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK + clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK + + genpll4 crystal 0 BCM_SR_GENPLL4 + clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK + clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK + clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK + clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK + clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK + + genpll5 crystal 0 BCM_SR_GENPLL5 + clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK + clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK + clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK + + genpll6 crystal 0 BCM_SR_GENPLL6 + clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK + + lcpll0 crystal 0 BCM_SR_LCPLL0 + clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK + clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK + clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK + clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK + + lcpll1 crystal 0 BCM_SR_LCPLL1 + clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK + clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK + clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK + + lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE + clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK + - if: + properties: + compatible: + contains: + const: brcm,cygnus-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: axi21 + - const: 250mhz + - const: ihost_sys + - const: enet_sw + - const: audio_125 + - const: can + - if: + properties: + compatible: + contains: + const: brcm,nsp-lcpll0 + then: + properties: + clock-output-names: + items: + - const: lcpll0 + - const: pcie_phy + - const: sdio + - const: ddr_phy + - if: + properties: + compatible: + contains: + const: brcm,nsp-genpll + then: + properties: + clock-output-names: + items: + - const: genpll + - const: phy + - const: ethernetclk + - const: usbclk + - const: iprocfast + - const: sata1 + - const: sata2 + +required: + - reg + - clocks + - '#clock-cells' + - clock-output-names + +additionalProperties: false + +examples: + - | + osc1: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll@301d000 { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x301d000 0x2c>, <0x301c020 0x4>; + clocks = <&os1c>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + - | + osc2: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks@301d048 { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x301d048 0xc>, <0x180aa024 0x4>; + clocks = <&osc2>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 0025c88f660c..8ecb7861ce10 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -460,7 +460,7 @@ status = "disabled"; }; - nand: nand@18046000 { + nand_controller: nand-controller@18046000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index e8df458aad39..84cda16f68a2 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -179,7 +179,7 @@ status = "disabled"; }; - nand: nand@26000 { + nand_controller: nand-controller@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x26000 0x600>, <0x11b408 0x600>, diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index b4d2cc70afb1..748df7955ae6 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -269,7 +269,7 @@ dma-coherent; }; - nand: nand@26000 { + nand_controller: nand-controller@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, <0x11b408 0x600>, diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 8636600385fd..c81944cd6d0b 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -24,8 +24,8 @@ reg = <0x00000000 0x08000000>; }; - nand: nand@18028000 { - nandcs@0 { + nand_controller: nand-controller@18028000 { + nand@0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index e635a15041dd..a6e2aeb28675 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -25,8 +25,8 @@ <0x88000000 0x08000000>; }; - nand: nand@18028000 { - nandcs@0 { + nand_controller: nand-controller@18028000 { + nand@0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index 2a8f7312d1be..6282363313e1 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -11,7 +11,7 @@ &pinctrl { compatible = "brcm,bcm4709-pinmux"; - pinmux_mdio: mdio { + pinmux_mdio: mdio-pins { groups = "mdio_grp"; function = "mdio"; }; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi index 925a7c9ce5b7..be9a00ff752d 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi @@ -6,8 +6,8 @@ */ / { - nand@18028000 { - nandcs: nandcs@0 { + nand-controller@18028000 { + nandcs: nand@0 { compatible = "brcm,nandcs"; reg = <0>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 7db72a2f1020..f92089290ccd 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -458,18 +458,18 @@ function = "spi"; }; - pinmux_i2c: i2c { + pinmux_i2c: i2c-pins { groups = "i2c_grp"; function = "i2c"; }; - pinmux_pwm: pwm { + pinmux_pwm: pwm-pins { groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; function = "pwm"; }; - pinmux_uart1: uart1 { + pinmux_uart1: uart1-pins { groups = "uart1_grp"; function = "uart1"; }; @@ -501,7 +501,7 @@ reg = <0x18004000 0x14>; }; - nand: nand@18028000 { + nand_controller: nand-controller@18028000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; reg-names = "nand", "iproc-idm", "iproc-ext"; @@ -520,27 +520,27 @@ <0x1811b408 0x004>, <0x180293a0 0x01c>; reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "spi_lr_fullness_reached", + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", "spi_lr_session_aborted", "spi_lr_impatient", "spi_lr_session_done", - "spi_lr_overhead", - "mspi_done", - "mspi_halted"; + "spi_lr_overread"; clocks = <&iprocmed>; clock-names = "iprocmed"; num-cs = <2>; #address-cells = <1>; #size-cells = <0>; - spi_nor: spi-nor@0 { + spi_nor: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 9c0325cf9e22..cca49a2e2d62 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -203,7 +203,7 @@ status = "disabled"; }; - nand: nand@2000 { + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts index 8313b7cad542..f92d2cf85972 100644 --- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts +++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts @@ -14,10 +14,10 @@ }; }; -&nand { +&nand_controller { status = "okay"; - nandcs@1 { + nand@1 { compatible = "brcm,nandcs"; reg = <1>; nand-ecc-step-size = <512>; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 58f67c9b830b..5ac2042515b8 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -148,7 +148,7 @@ reg-names = "aon-ctrl", "aon-sram"; }; - nand: nand@3e2800 { + nand_controller: nand-controller@3e2800 { status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index b2d323f4a5ab..a76c74b44bba 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -82,8 +82,8 @@ status = "okay"; }; -&nand { - nandcs@1 { +&nand_controller { + nand@1 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 046c59fb4846..de40bd59a5fa 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -49,8 +49,8 @@ }; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index b4a1392bd5a6..dda3e11b711f 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -60,8 +60,8 @@ status = "okay"; }; -&nand { - nandcs@1 { +&nand_controller { + nand@1 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index 3378683321d3..ea3c6b88b313 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -68,8 +68,8 @@ status = "okay"; }; -&nand { - nandcs@1 { +&nand_controller { + nand@1 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 5443fc079e6e..1f73885ec274 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -74,8 +74,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index e1e3c26cef19..b6b9ca8b0972 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -74,8 +74,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index f161ba2e7e5e..ecf426f6ad5d 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -90,8 +90,8 @@ }; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 83cb877d63db..8ca18da981ad 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -78,8 +78,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 4e106ce1384a..9747378db531 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -78,8 +78,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index cda6cc281e18..0f92b773afb8 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -89,8 +89,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index ffbff0014c65..9e984ca0e6df 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -68,8 +68,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 5b177274f182..df5c8ab90627 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -31,10 +31,10 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - nandcs@0 { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-ecc-strength = <4>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 3fd39c479a3c..5475dab8181d 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -74,8 +74,8 @@ status = "okay"; }; -&nand { - nandcs@0 { +&nand_controller { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index 8060178b365d..a5a64d17d9ea 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -306,7 +306,7 @@ interrupt-names = "nand"; status = "okay"; - nandcs: nandcs@0 { + nandcs: nand@0 { compatible = "brcm,nandcs"; reg = <0>; }; |