diff options
4 files changed, 75 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt deleted file mode 100644 index bde63f8f090e..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt +++ /dev/null @@ -1,38 +0,0 @@ -Amlogic meson GPIO interrupt controller - -Meson SoCs contains an interrupt controller which is able to watch the SoC -pads and generate an interrupt on edge or level. The controller is essentially -a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge -or level and polarity. It does not expose all 256 mux inputs because the -documentation shows that the upper part is not mapped to any pad. The actual -number of interrupt exposed depends on the SoC. - -Required properties: - -- compatible : must have "amlogic,meson8-gpio-intc" and either - "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or - "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or - "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or - "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912) - "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X) - "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2) - "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3) - "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L) - "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2) -- reg : Specifies base physical address and size of the registers. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value must be 2. -- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These - are the hwirqs used on the parent interrupt controller. - -Example: - -gpio_interrupt: interrupt-controller@9880 { - compatible = "amlogic,meson-gxbb-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0x9880 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - meson,channel-interrupts = <64 65 66 67 68 69 70 71>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml new file mode 100644 index 000000000000..e84e4f33b358 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson GPIO interrupt controller + +maintainers: + - Heiner Kallweit <hkallweit1@gmail.com> + +description: | + Meson SoCs contains an interrupt controller which is able to watch the SoC + pads and generate an interrupt on edge or level. The controller is essentially + a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select + edge or level and polarity. It does not expose all 256 mux inputs because the + documentation shows that the upper part is not mapped to any pad. The actual + number of interrupts exposed depends on the SoC. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - const: amlogic,meson-gpio-intc + - items: + - enum: + - amlogic,meson8-gpio-intc + - amlogic,meson8b-gpio-intc + - amlogic,meson-gxbb-gpio-intc + - amlogic,meson-gxl-gpio-intc + - amlogic,meson-axg-gpio-intc + - amlogic,meson-g12a-gpio-intc + - amlogic,meson-sm1-gpio-intc + - amlogic,meson-a1-gpio-intc + - amlogic,meson-s4-gpio-intc + - const: amlogic,meson-gpio-intc + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + amlogic,channel-interrupts: + description: Array with the upstream hwirq numbers + minItems: 8 + maxItems: 12 + $ref: /schemas/types.yaml#/definitions/uint32-array + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - amlogic,channel-interrupts + +additionalProperties: false + +examples: + - | + interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x9880 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 524bc8b60e4e..21b954e872a6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1910,10 +1910,12 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-amlogic@lists.infradead.org S: Maintained W: http://linux-meson.com/ +F: Documentation/devicetree/bindings/phy/amlogic* F: arch/arm/boot/dts/meson* F: arch/arm/mach-meson/ F: arch/arm64/boot/dts/amlogic/ F: drivers/mmc/host/meson* +F: drivers/phy/amlogic/ F: drivers/pinctrl/meson/ F: drivers/rtc/rtc-meson* F: drivers/soc/amlogic/ diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c index e93518763526..25b4b71df9b8 100644 --- a/drivers/soc/amlogic/meson-secure-pwrc.c +++ b/drivers/soc/amlogic/meson-secure-pwrc.c @@ -105,7 +105,7 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = { SEC_PD(ACODEC, 0), SEC_PD(AUDIO, 0), SEC_PD(OTP, 0), - SEC_PD(DMA, 0), + SEC_PD(DMA, GENPD_FLAG_ALWAYS_ON | GENPD_FLAG_IRQ_SAFE), SEC_PD(SD_EMMC, 0), SEC_PD(RAMA, 0), /* SRAMB is used as ATF runtime memory, and should be always on */ |