diff options
| -rw-r--r-- | arch/arm/boot/dts/da850-evm.dts | 31 | ||||
| -rw-r--r-- | arch/arm/boot/dts/da850-lego-ev3.dts | 52 | ||||
| -rw-r--r-- | arch/arm/boot/dts/da850.dtsi | 25 |
3 files changed, 95 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index d15107cba765..8d244cd76c36 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -9,6 +9,7 @@ */ /dts-v1/; #include "da850.dtsi" +#include <dt-bindings/gpio/gpio.h> / { compatible = "ti,da850-evm", "ti,da850"; @@ -78,7 +79,10 @@ DRVDD-supply = <&vbat>; DVDD-supply = <&vbat>; }; - + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + }; }; wdt: wdt@21000 { status = "okay"; @@ -293,20 +297,27 @@ &vpif { pinctrl-names = "default"; - pinctrl-0 = <&vpif_capture_pins>; + pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; status = "okay"; /* VPIF capture port */ - port { - vpif_ch0: endpoint@0 { - reg = <0>; - bus-width = <8>; + port@0 { + vpif_input_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; }; - vpif_ch1: endpoint@1 { - reg = <1>; - bus-width = <8>; - data-shift = <8>; + vpif_input_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; + + /* VPIF display port */ + port@1 { + vpif_output_ch0: endpoint { + bus-width = <8>; }; }; }; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 112ec92064ce..c20580a7356e 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -123,6 +123,14 @@ pinctrl-0 = <&system_power_pin>; }; + sound { + compatible = "pwm-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm0b_pins>; + pwms = <&ehrpwm0 1 1000000 0>; + amp-supply = <&>; + }; + /* * This is a 5V current limiting regulator that is shared by USB, * the sensor (input) ports, the motor (output) ports and the A/DC. @@ -139,6 +147,31 @@ enable-active-high; regulator-boot-on; }; + + /* + * This is a simple voltage divider on VCC5V to provide a 2.5V + * reference signal to the ADC. + */ + adc_ref: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "adc ref"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + vin-supply = <&vcc5v>; + }; + + /* + * This is the amplifier for the speaker. + */ + amp: regulator3 { + pinctrl-names = "default"; + pinctrl-0 = <&_pins>; + compatible = "regulator-fixed"; + regulator-name = "amp"; + gpio = <&gpio 111 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &pmx_core { @@ -195,6 +228,13 @@ 0x4c 0x00008000 0x0000f000 >; }; + + amp_pins: pinmux_amp_pins { + pinctrl-single,bits = < + /* GP6[15] */ + 0x34 0x00000008 0x0000000f + >; + }; }; &pinconf { @@ -293,6 +333,18 @@ }; }; }; + + adc: adc@3 { + compatible = "ti,ads7957"; + reg = <3>; + #io-channel-cells = <1>; + spi-max-frequency = <10000000>; + vref-supply = <&adc_ref>; + }; +}; + +&ehrpwm0 { + status = "okay"; }; &gpio { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 92d633d1da68..c708155767f3 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -216,8 +216,21 @@ 0x3c 0x11111111 0xffffffff /* VP_DIN[8..9] */ 0x40 0x00000011 0x000000ff - /* VP_CLKIN3, VP_CLKIN2 */ - 0x4c 0x00010100 0x000f0f00 + >; + }; + vpif_display_pins: vpif_display_pins { + pinctrl-single,bits = < + /* VP_DOUT[2..7] */ + 0x40 0x11111100 0xffffff00 + /* VP_DOUT[10..15,0..1] */ + 0x44 0x11111111 0xffffffff + /* VP_DOUT[8..9] */ + 0x48 0x00000011 0x000000ff + /* + * VP_CLKOUT3, VP_CLKIN3, + * VP_CLKOUT2, VP_CLKIN2 + */ + 0x4c 0x00111100 0x00ffff00 >; }; }; @@ -345,7 +358,13 @@ status = "disabled"; /* VPIF capture port */ - port { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + }; + + /* VPIF display port */ + port@1 { #address-cells = <1>; #size-cells = <0>; }; |