diff options
120 files changed, 1435 insertions, 294 deletions
diff --git a/Documentation/Changes b/Documentation/Changes index b17580885273..07c75d18154e 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode as root before you can use this. You'll probably also want to get the user-space microcode_ctl utility to use with this. -Powertweak ----------- - -If you are running v0.1.17 or earlier, you should upgrade to -version v0.99.0 or higher. Running old versions may cause problems -with programs using shared memory. - udev ---- udev is a userspace application for populating /dev dynamically with @@ -366,10 +359,6 @@ Intel P6 microcode ------------------ o <http://www.urbanmyth.org/microcode/> -Powertweak ----------- -o <http://powertweak.sourceforge.net/> - udev ---- o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 6c9d9d37c83a..f5170082bdb3 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -58,7 +58,7 @@ </sect1> <sect1><title>Wait queues and Wake events</title> !Iinclude/linux/wait.h -!Ekernel/wait.c +!Ekernel/sched/wait.c </sect1> <sect1><title>High-resolution timers</title> !Iinclude/linux/ktime.h diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt new file mode 100644 index 000000000000..0d03506f2cc5 --- /dev/null +++ b/Documentation/gpio/board.txt @@ -0,0 +1,115 @@ +GPIO Mappings +============= + +This document explains how GPIOs can be assigned to given devices and functions. +Note that it only applies to the new descriptor-based interface. For a +description of the deprecated integer-based GPIO interface please refer to +gpio-legacy.txt (actually, there is no real mapping possible with the old +interface; you just fetch an integer from somewhere and request the +corresponding GPIO. + +Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage +is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in +their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to +describe its hardware layout. Currently, mappings can be defined through device +tree, ACPI, and platform data. + +Device Tree +----------- +GPIOs can easily be mapped to devices and functions in the device tree. The +exact way to do it depends on the GPIO controller providing the GPIOs, see the +device tree bindings for your controller. + +GPIOs mappings are defined in the consumer device's node, in a property named +<function>-gpios, where <function> is the function the driver will request +through gpiod_get(). For example: + + foo_device { + compatible = "acme,foo"; + ... + led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */ + <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */ + <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */ + + power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + +This property will make GPIOs 15, 16 and 17 available to the driver under the +"led" function, and GPIO 1 as the "power" GPIO: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + +The led GPIOs will be active-high, while the power GPIO will be active-low (i.e. +gpiod_is_active_low(power) will be true). + +ACPI +---- +ACPI does not support function names for GPIOs. Therefore, only the "idx" +argument of gpiod_get_index() is useful to discriminate between GPIOs assigned +to a device. The "con_id" argument can still be set for debugging purposes (it +will appear under error messages as well as debug and sysfs nodes). + +Platform Data +------------- +Finally, GPIOs can be bound to devices and functions using platform data. Board +files that desire to do so need to include the following header: + + #include <linux/gpio/driver.h> + +GPIOs are mapped by the means of tables of lookups, containing instances of the +gpiod_lookup structure. Two macros are defined to help declaring such mappings: + + GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags) + GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags) + +where + + - chip_label is the label of the gpiod_chip instance providing the GPIO + - chip_hwnum is the hardware number of the GPIO within the chip + - dev_id is the identifier of the device that will make use of this GPIO. If + NULL, the GPIO will be available to all devices. + - con_id is the name of the GPIO function from the device point of view. It + can be NULL. + - idx is the index of the GPIO within the function. + - flags is defined to specify the following properties: + * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low + * GPIOF_OPEN_DRAIN - GPIO pin is open drain type. + * GPIOF_OPEN_SOURCE - GPIO pin is open source type. + +In the future, these flags might be extended to support more properties. + +Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0. + +A lookup table can then be defined as follows: + + struct gpiod_lookup gpios_table[] = { + GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW), + }; + +And the table can be added by the board code as follows: + + gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table)); + +The driver controlling "foo.0" will then be able to obtain its GPIOs as follows: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + gpiod_direction_output(power, 1); + +Since the "power" GPIO is mapped as active-low, its actual signal will be 0 +after this code. Contrary to the legacy integer GPIO interface, the active-low +property is handled during mapping and is thus transparent to GPIO consumers. diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt new file mode 100644 index 000000000000..07c74a3765a0 --- /dev/null +++ b/Documentation/gpio/consumer.txt @@ -0,0 +1,197 @@ +GPIO Descriptor Consumer Interface +================================== + +This document describes the consumer interface of the GPIO framework. Note that +it describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + + +Guidelines for GPIOs consumers +============================== + +Drivers that can't work without standard GPIO calls should have Kconfig entries +that depend on GPIOLIB. The functions that allow a driver to obtain and use +GPIOs are available by including the following file: + + #include <linux/gpio/consumer.h> + +All the functions that work with the descriptor-based GPIO interface are +prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No +other function in the kernel should use these prefixes. + + +Obtaining and Disposing GPIOs +============================= + +With the descriptor-based interface, GPIOs are identified with an opaque, +non-forgeable handler that must be obtained through a call to one of the +gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the +device that will use the GPIO and the function the requested GPIO is supposed to +fulfill: + + struct gpio_desc *gpiod_get(struct device *dev, const char *con_id) + +If a function is implemented by using several GPIOs together (e.g. a simple LED +device that displays digits), an additional index argument can be specified: + + struct gpio_desc *gpiod_get_index(struct device *dev, + const char *con_id, unsigned int idx) + +Both functions return either a valid GPIO descriptor, or an error code checkable +with IS_ERR(). They will never return a NULL pointer. + +Device-managed variants of these functions are also defined: + + struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id) + + struct gpio_desc *devm_gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx) + +A GPIO descriptor can be disposed of using the gpiod_put() function: + + void gpiod_put(struct gpio_desc *desc) + +It is strictly forbidden to use a descriptor after calling this function. The +device-managed variant is, unsurprisingly: + + void devm_gpiod_put(struct device *dev, struct gpio_desc *desc) + + +Using GPIOs +=========== + +Setting Direction +----------------- +The first thing a driver must do with a GPIO is setting its direction. This is +done by invoking one of the gpiod_direction_*() functions: + + int gpiod_direction_input(struct gpio_desc *desc) + int gpiod_direction_output(struct gpio_desc *desc, int value) + +The return value is zero for success, else a negative errno. It should be +checked, since the get/set calls don't return errors and since misconfiguration +is possible. You should normally issue these calls from a task context. However, +for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part +of early board setup. + +For output GPIOs, the value provided becomes the initial output value. This +helps avoid signal glitching during system startup. + +A driver can also query the current direction of a GPIO: + + int gpiod_get_direction(const struct gpio_desc *desc) + +This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT. + +Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO +without setting its direction first is illegal and will result in undefined +behavior!** + + +Spinlock-Safe GPIO Access +------------------------- +Most GPIO controllers can be accessed with memory read/write instructions. Those +don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ +handlers and similar contexts. + +Use the following calls to access GPIOs from an atomic context: + + int gpiod_get_value(const struct gpio_desc *desc); + void gpiod_set_value(struct gpio_desc *desc, int value); + +The values are boolean, zero for low, nonzero for high. When reading the value +of an output pin, the value returned should be what's seen on the pin. That +won't always match the specified output value, because of issues including +open-drain signaling and output latencies. + +The get/set calls do not return errors because "invalid GPIO" should have been +reported earlier from gpiod_direction_*(). However, note that not all platforms +can read the value of output pins; those that can't should always return zero. +Also, using these calls for GPIOs that can't safely be accessed without sleeping +(see below) is an error. + + +GPIO Access That May Sleep +-------------------------- +Some GPIO controllers must be accessed using message based buses like I2C or +SPI. Commands to read or write those GPIO values require waiting to get to the +head of a queue to transmit a command and get its response. This requires +sleeping, which can't be done from inside IRQ handlers. + +Platforms that support this type of GPIO distinguish them from other GPIOs by +returning nonzero from this call: + + int gpiod_cansleep(const struct gpio_desc *desc) + +To access such GPIOs, a different set of accessors is defined: + + int gpiod_get_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) + +Accessing such GPIOs requires a context which may sleep, for example a threaded +IRQ handler, and those accessors must be used instead of spinlock-safe +accessors without the cansleep() name suffix. + +Other than the fact that these accessors might sleep, and will work on GPIOs +that can't be accessed from hardIRQ handlers, these calls act the same as the +spinlock-safe calls. + + +Active-low State and Raw GPIO Values +------------------------------------ +Device drivers like to manage the logical state of a GPIO, i.e. the value their +device will actually receive, no matter what lies between it and the GPIO line. +In some cases, it might make sense to control the actual GPIO line value. The +following set of calls ignore the active-low property of a GPIO and work on the +raw line value: + + int gpiod_get_raw_value(const struct gpio_desc *desc) + void gpiod_set_raw_value(struct gpio_desc *desc, int value) + int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value) + +The active-low state of a GPIO can also be queried using the following call: + + int gpiod_is_active_low(const struct gpio_desc *desc) + +Note that these functions should only be used with great moderation ; a driver +should not have to care about the physical line level. + +GPIOs mapped to IRQs +-------------------- +GPIO lines can quite often be used as IRQs. You can get the IRQ number +corresponding to a given GPIO using the following call: + + int gpiod_to_irq(const struct gpio_desc *desc) + +It will return an IRQ number, or an negative errno code if the mapping can't be +done (most likely because that particular GPIO cannot be used as IRQ). It is an +unchecked error to use a GPIO that wasn't set up as an input using +gpiod_direction_input(), or to use an IRQ number that didn't originally come +from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep. + +Non-error values returned from gpiod_to_irq() can be passed to request_irq() or +free_irq(). They will often be stored into IRQ resources for platform devices, +by the board-specific initialization code. Note that IRQ trigger options are +part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup +capabilities. + + +Interacting With the Legacy GPIO Subsystem +========================================== +Many kernel subsystems still handle GPIOs using the legacy integer-based +interface. Although it is strongly encouraged to upgrade them to the safer +descriptor-based API, the following two functions allow you to convert a GPIO +descriptor into the GPIO integer namespace and vice-versa: + + int desc_to_gpio(const struct gpio_desc *desc) + struct gpio_desc *gpio_to_desc(unsigned gpio) + +The GPIO number returned by desc_to_gpio() can be safely used as long as the +GPIO descriptor has not been freed. All the same, a GPIO number passed to +gpio_to_desc() must have been properly acquired, and usage of the returned GPIO +descriptor is only possible after the GPIO number has been released. + +Freeing a GPIO obtained by one API with the other API is forbidden and an +unchecked error. diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt new file mode 100644 index 000000000000..9da0bfa74781 --- /dev/null +++ b/Documentation/gpio/driver.txt @@ -0,0 +1,75 @@ +GPIO Descriptor Driver Interface +================================ + +This document serves as a guide for GPIO chip drivers writers. Note that it +describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + +Each GPIO controller driver needs to include the following header, which defines +the structures used to define a GPIO driver: + + #include <linux/gpio/driver.h> + + +Internal Representation of GPIOs +================================ + +Inside a GPIO driver, individual GPIOs are identified by their hardware number, +which is a unique number between 0 and n, n being the number of GPIOs managed by +the chip. This number is purely internal: the hardware number of a particular +GPIO descriptor is never made visible outside of the driver. + +On top of this internal number, each GPIO also need to have a global number in +the integer GPIO namespace so that it can be used with the legacy GPIO +interface. Each chip must thus have a "base" number (which can be automatically +assigned), and for each GPIO the global number will be (base + hardware number). +Although the integer representation is considered deprecated, it still has many +users and thus needs to be maintained. + +So for example one platform could use numbers 32-159 for GPIOs, with a +controller defining 128 GPIOs at a "base" of 32 ; while another platform uses +numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO +controller, and on one particular board 80-95 with an FPGA. The numbers need not +be contiguous; either of those platforms could also use numbers 2000-2063 to +identify GPIOs in a bank of I2C GPIO expanders. + + +Controller Drivers: gpio_chip +============================= + +In the gpiolib framework each GPIO controller is packaged as a "struct +gpio_chip" (see linux/gpio/driver.h for its complete definition) with members +common to each controller of that type: + + - methods to establish GPIO direction + - methods used to access GPIO values + - method to return the IRQ number associated to a given GPIO + - flag saying whether calls to its methods may sleep + - optional debugfs dump method (showing extra state like pullup config) + - optional base number (will be automatically assigned if omitted) + - label for diagnostics and GPIOs mapping using platform data + +The code implementing a gpio_chip should support multiple instances of the +controller, possibly using the driver model. That code will configure each +gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare; +use gpiochip_remove() when it is unavoidable. + +Most often a gpio_chip is part of an instance-specific structure with state not +exposed by the GPIO interfaces, such as addressing, power management, and more. +Chips such as codecs will have complex non-GPIO state. + +Any debugfs dump method should normally ignore signals which haven't been +requested as GPIOs. They can use gpiochip_is_requested(), which returns either +NULL or the label associated with that GPIO when it was requested. + +Locking IRQ usage +----------------- +Input GPIOs can be used as IRQ signals. When this happens, a driver is requested +to mark the GPIO as being used as an IRQ: + + int gpiod_lock_as_irq(struct gpio_desc *desc) + +This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock +is released: + + void gpiod_unlock_as_irq(struct gpio_desc *desc) diff --git a/Documentation/gpio.txt b/Documentation/gpio/gpio-legacy.txt index 6f83fa965b4b..6f83fa965b4b 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio/gpio-legacy.txt diff --git a/Documentation/gpio/gpio.txt b/Documentation/gpio/gpio.txt new file mode 100644 index 000000000000..cd9b356e88cd --- /dev/null +++ b/Documentation/gpio/gpio.txt @@ -0,0 +1,119 @@ +GPIO Interfaces +=============== + +The documents in this directory give detailed instructions on how to access +GPIOs in drivers, and how to write a driver for a device that provides GPIOs +itself. + +Due to the history of GPIO interfaces in the kernel, there are two different +ways to obtain and use GPIOs: + + - The descriptor-based interface is the preferred way to manipulate GPIOs, +and is described by all the files in this directory excepted gpio-legacy.txt. + - The legacy integer-based interface which is considered deprecated (but still +usable for compatibility reasons) is documented in gpio-legacy.txt. + +The remainder of this document applies to the new descriptor-based interface. +gpio-legacy.txt contains the same information applied to the legacy +integer-based interface. + + +What is a GPIO? +=============== + +A "General Purpose Input/Output" (GPIO) is a flexible software-controlled +digital signal. They are provided from many kinds of chip, and are familiar +to Linux developers working with embedded and custom hardware. Each GPIO +represents a bit connected to a particular pin, or "ball" on Ball Grid Array +(BGA) packages. Board schematics show which external hardware connects to +which GPIOs. Drivers can be written generically, so that board setup code +passes such pin configuration data to drivers. + +System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every +non-dedicated pin can be configured as a GPIO; and most chips have at least +several dozen of them. Programmable logic devices (like FPGAs) can easily +provide GPIOs; multifunction chips like power managers, and audio codecs +often have a few such pins to help with pin scarcity on SOCs; and there are +also "GPIO Expander" chips that connect using the I2C or SPI serial buses. +Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS +firmware knowing how they're used). + +The exact capabilities of GPIOs vary between systems. Common options: + + - Output values are writable (high=1, low=0). Some chips also have + options about how that value is driven, so that for example only one + value might be driven, supporting "wire-OR" and similar schemes for the + other value (notably, "open drain" signaling). + + - Input values are likewise readable (1, 0). Some chips support readback + of pins configured as "output", which is very useful in such "wire-OR" + cases (to support bidirectional signaling). GPIO controllers may have + input de-glitch/debounce logic, sometimes with software controls. + + - Inputs can often be used as IRQ signals, often edge triggered but + sometimes level triggered. Such IRQs may be configurable as system + wakeup events, to wake the system from a low power state. + + - Usually a GPIO will be configurable as either input or output, as needed + by different product boards; single direction ones exist too. + + - Most GPIOs can be accessed while holding spinlocks, but those accessed + through a serial bus normally can't. Some systems support both types. + +On a given board each GPIO is used for one specific purpose like monitoring +MMC/SD card insertion/removal, detecting card write-protect status, driving +a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware +watchdog, sensing a switch, and so on. + + +Common GPIO Properties +====================== + +These properties are met through all the other documents of the GPIO interface +and it is useful to understand them, especially if you need to define GPIO +mappings. + +Active-High and Active-Low +-------------------------- +It is natural to assume that a GPIO is "active" when its output signal is 1 +("high"), and inactive when it is 0 ("low"). However in practice the signal of a +GPIO may be inverted before is reaches its destination, or a device could decide +to have different conventions about what "active" means. Such decisions should +be transparent to device drivers, therefore it is possible to define a GPIO as +being either active-high ("1" means "active", the default) or active-low ("0" +means "active") so that drivers only need to worry about the logical signal and +not about what happens at the line level. + +Open Drain and Open Source +-------------------------- +Sometimes shared signals need to use "open drain" (where only the low signal +level is actually driven), or "open source" (where only the high signal level is +driven) signaling. That term applies to CMOS transistors; "open collector" is +used for TTL. A pullup or pulldown resistor causes the high or low signal level. +This is sometimes called a "wire-AND"; or more practically, from the negative +logic (low=true) perspective this is a "wire-OR". + +One common example of an open drain signal is a shared active-low IRQ line. +Also, bidirectional data bus signals sometimes use open drain signals. + +Some GPIO controllers directly support open drain and open source outputs; many +don't. When you need open drain signaling but your hardware doesn't directly +support it, there's a common idiom you can use to emulate it with any GPIO pin +that can be used as either an input or an output: + + LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides + the pullup. + + HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup + (or some other device) controls the signal. + +The same logic can be applied to emulate open source signaling, by driving the +high signal and configuring the GPIO as input for low. This open drain/open +source emulation can be handled transparently by the GPIO framework. + +If you are "driving" the signal high but gpiod_get_value(gpio) reports a low +value (after the appropriate rise time passes), you know some other component is +driving the shared signal low. That's not necessarily an error. As one common +example, that's how I2C clocks are stretched: a slave that needs a slower clock +delays the rising edge of SCK, and the I2C master adjusts its signaling rate +accordingly. diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt new file mode 100644 index 000000000000..c2c3a97f8ff7 --- /dev/null +++ b/Documentation/gpio/sysfs.txt @@ -0,0 +1,155 @@ +GPIO Sysfs Interface for Userspace +================================== + +Platforms which use the "gpiolib" implementors framework may choose to +configure a sysfs user interface to GPIOs. This is different from the +debugfs interface, since it provides control over GPIO direction and +value instead of just showing a gpio state summary. Plus, it could be +present on production systems without debugging support. + +Given appropriate hardware documentation for the system, userspace could +know for example that GPIO #23 controls the write protect line used to +protect boot loader segments in flash memory. System upgrade procedures +may need to temporarily remove that protection, first importing a GPIO, +then changing its output state, then updating the code before re-enabling +the write protection. In normal use, GPIO #23 would never be touched, +and the kernel would have no need to know about it. + +Again depending on appropriate hardware documentation, on some systems +userspace GPIO can be used to determine system configuration data that +standard kernels won't know about. And for some tasks, simple userspace +GPIO drivers could be all that the system really needs. + +Note that standard kernel drivers exist for common "LEDs and Buttons" +GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those +instead of talking directly to the GPIOs; they integrate with kernel +frameworks better than your userspace code could. + + +Paths in Sysfs +-------------- +There are three kinds of entry in /sys/class/gpio: + + - Control interfaces used to get userspace control over GPIOs; + + - GPIOs themselves; and + + - GPIO controllers ("gpio_chip" instances). + +That's in addition to standard files including the "device" symlink. + +The control interfaces are write-only: + + /sys/class/gpio/ + + "export" ... Userspace may ask the kernel to export control of + a GPIO to userspace by writing its number to this file. + + Example: "echo 19 > export" will create a "gpio19" node + for GPIO #19, if that's not requested by kernel code. + + "unexport" ... Reverses the effect of exporting to userspace. + + Example: "echo 19 > unexport" will remove a "gpio19" + node exported using the "export" file. + +GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) +and have the following read/write attributes: + + /sys/class/gpio/gpioN/ + + "direction" ... reads as either "in" or "out". This value may + normally be written. Writing as "out" defaults to + initializing the value as low. To ensure glitch free + operation, values "low" and "high" may be written to + configure the GPIO as an output with that initial value. + + Note that this attribute *will not exist* if the kernel + doesn't support changing the direction of a GPIO, or + it was exported by kernel code that didn't explicitly + allow userspace to reconfigure this GPIO's direction. + + "value" ... reads as either 0 (low) or 1 (high). If the GPIO + is configured as an output, this value may be written; + any nonzero value is treated as high. + + If the pin can be configured as interrupt-generating interrupt + and if it has been configured to generate interrupts (see the + description of "edge"), you can poll(2) on that file and + poll(2) will return whenever the interrupt was triggered. If + you use poll(2), set the events POLLPRI and POLLERR. If you + use select(2), set the file descriptor in exceptfds. After + poll(2) returns, either lseek(2) to the beginning of the sysfs + file and read the new value or close the file and re-open it + to read the value. + + "edge" ... reads as either "none", "rising", "falling", or + "both". Write these strings to select the signal edge(s) + that will make poll(2) on the "value" file return. + + This file exists only if the pin can be configured as an + interrupt generating input pin. + + "active_low" ... reads as either 0 (false) or 1 (true). Write + any nonzero value to invert the value attribute both + for reading and writing. Existing and subsequent + poll(2) support configuration via the edge attribute + for "rising" and "falling" edges will follow this + setting. + +GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the +controller implementing GPIOs starting at #42) and have the following +read-only attributes: + + /sys/class/gpio/gpiochipN/ + + "base" ... same as N, the first GPIO managed by this chip + + "label" ... provided for diagnostics (not always unique) + + "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) + +Board documentation should in most cases cover what GPIOs are used for +what purposes. However, those numbers are not always stable; GPIOs on +a daughtercard might be different depending on the base board being used, +or other cards in the stack. In such cases, you may need to use the +gpiochip nodes (possibly in conjunction with schematics) to determine +the correct GPIO number to use for a given signal. + + +Exporting from Kernel code +-------------------------- +Kernel code can explicitly manage exports of GPIOs which have already been +requested using gpio_request(): + + /* export the GPIO to userspace */ + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + + /* reverse gpio_export() */ + void gpiod_unexport(struct gpio_desc *desc); + + /* create a sysfs link to an exported GPIO node */ + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); + + /* change the polarity of a GPIO node in sysfs */ + int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value); + +After a kernel driver requests a GPIO, it may only be made available in +the sysfs interface by gpiod_export(). The driver can control whether the +signal direction may change. This helps drivers prevent userspace code +from accidentally clobbering important system state. + +This explicit exporting can help with debugging (by making some kinds +of experiments easier), or can provide an always-there interface that's +suitable for documenting as part of a board support package. + +After the GPIO has been exported, gpiod_export_link() allows creating +symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can +use this to provide the interface under their own device in sysfs with +a descriptive name. + +Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity +differences between boards from user space. Polarity change can be done both +before and after gpiod_export(), and previously enabled poll(2) support for +either rising or falling edge will be reconfigured to follow this setting. diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 8a2463670a5b..0f4344e6fbca 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -75,8 +75,10 @@ LDEMULATION := lppc GNUTARGET := powerpcle MULTIPLEWORD := -mno-multiple else +ifeq ($(call cc-option-yn,-mbig-endian),y) override CC += -mbig-endian override AS += -mbig-endian +endif override LD += -EB LDEMULATION := ppc GNUTARGET := powerpc @@ -128,7 +130,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6) CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7) +# Altivec option not allowed with e500mc64 in GCC. +ifeq ($(CONFIG_ALTIVEC),y) +E5500_CPU := -mcpu=powerpc64 +else E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64) +endif CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU) CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU)) diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts index cc00f4ddd9a7..c409cbafb126 100644 --- a/arch/powerpc/boot/dts/xcalibur1501.dts +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -637,14 +637,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts index 53c1c6a9752f..04cb410da48b 100644 --- a/arch/powerpc/boot/dts/xpedite5301.dts +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -547,14 +547,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts index 215225983150..73f8620f1ce7 100644 --- a/arch/powerpc/boot/dts/xpedite5330.dts +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -583,14 +583,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts index 11dbda10d756..cd0ea2b99362 100644 --- a/arch/powerpc/boot/dts/xpedite5370.dts +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -545,14 +545,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S index 5143228e3e5f..6636b1d7821b 100644 --- a/arch/powerpc/boot/util.S +++ b/arch/powerpc/boot/util.S @@ -71,18 +71,32 @@ udelay: add r4,r4,r5 addi r4,r4,-1 divw r4,r4,r5 /* BUS ticks */ +#ifdef CONFIG_8xx +1: mftbu r5 + mftb r6 + mftbu r7 +#else 1: mfspr r5, SPRN_TBRU mfspr r6, SPRN_TBRL mfspr r7, SPRN_TBRU +#endif cmpw 0,r5,r7 bne 1b /* Get [synced] base time */ addc r9,r6,r4 /* Compute end time */ addze r8,r5 +#ifdef CONFIG_8xx +2: mftbu r5 +#else 2: mfspr r5, SPRN_TBRU +#endif cmpw 0,r5,r8 blt 2b bgt 3f +#ifdef CONFIG_8xx + mftb r6 +#else mfspr r6, SPRN_TBRL +#endif cmpw 0,r6,r9 blt 2b 3: blr diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 16cb92d215d2..694012877bf7 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -16,6 +16,7 @@ struct vmemmap_backing { unsigned long phys; unsigned long virt_addr; }; +extern struct vmemmap_backing *vmemmap_list; /* * Functions that deal with pagetables that could be at any level of diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 3c1acc31a092..f595b98079ee 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -366,6 +366,8 @@ BEGIN_FTR_SECTION_NESTED(96); \ cmpwi dest,0; \ beq- 90b; \ END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) +#elif defined(CONFIG_8xx) +#define MFTB(dest) mftb dest #else #define MFTB(dest) mfspr dest, SPRN_TBRL #endif diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 5c45787d551e..fa8388ed94c5 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1174,12 +1174,19 @@ #else /* __powerpc64__ */ +#if defined(CONFIG_8xx) +#define mftbl() ({unsigned long rval; \ + asm volatile("mftbl %0" : "=r" (rval)); rval;}) +#define mftbu() ({unsigned long rval; \ + asm volatile("mftbu %0" : "=r" (rval)); rval;}) +#else #define mftbl() ({unsigned long rval; \ asm volatile("mfspr %0, %1" : "=r" (rval) : \ "i" (SPRN_TBRL)); rval;}) #define mftbu() ({unsigned long rval; \ asm volatile("mfspr %0, %1" : "=r" (rval) : \ "i" (SPRN_TBRU)); rval;}) +#endif #endif /* !__powerpc64__ */ #define mttbl(v) asm volatile("mttbl %0":: "r"(v)) diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h index 18908caa1f3b..2cf846edb3fc 100644 --- a/arch/powerpc/include/asm/timex.h +++ b/arch/powerpc/include/asm/timex.h @@ -29,7 +29,11 @@ static inline cycles_t get_cycles(void) ret = 0; __asm__ __volatile__( +#ifdef CONFIG_8xx + "97: mftb %0\n" +#else "97: mfspr %0, %2\n" +#endif "99:\n" ".section __ftr_fixup,\"a\"\n" ".align 2\n" @@ -41,7 +45,11 @@ static inline cycles_t get_cycles(void) " .long 0\n" " .long 0\n" ".previous" +#ifdef CONFIG_8xx + : "=r" (ret) : "i" (CPU_FTR_601)); +#else : "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL)); +#endif return ret; #endif } diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index e1ec57e87b3b..88a7fb458dfd 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -18,6 +18,7 @@ #include <linux/ftrace.h> #include <asm/machdep.h> +#include <asm/pgalloc.h> #include <asm/prom.h> #include <asm/sections.h> @@ -75,6 +76,17 @@ void arch_crash_save_vmcoreinfo(void) #ifndef CONFIG_NEED_MULTIPLE_NODES VMCOREINFO_SYMBOL(contig_page_data); #endif +#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP) + VMCOREINFO_SYMBOL(vmemmap_list); + VMCOREINFO_SYMBOL(mmu_vmemmap_psize); + VMCOREINFO_SYMBOL(mmu_psize_defs); + VMCOREINFO_STRUCT_SIZE(vmemmap_backing); + VMCOREINFO_OFFSET(vmemmap_backing, list); + VMCOREINFO_OFFSET(vmemmap_backing, phys); + VMCOREINFO_OFFSET(vmemmap_backing, virt_addr); + VMCOREINFO_STRUCT_SIZE(mmu_psize_def); + VMCOREINFO_OFFSET(mmu_psize_def, shift); +#endif } /* diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index fd82c289ab1c..28b898e68185 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -210,7 +210,7 @@ static void __init nvram_print_partitions(char * label) printk(KERN_WARNING "--------%s---------\n", label); printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n"); list_for_each_entry(tmp_part, &nvram_partitions, partition) { - printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12s\n", + printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n", tmp_part->index, tmp_part->header.signature, tmp_part->header.checksum, tmp_part->header.length, tmp_part->header.name); diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 1844298f5ea4..68027bfa5f8e 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -445,6 +445,12 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, #endif /* CONFIG_ALTIVEC */ if (copy_fpr_to_user(&frame->mc_fregs, current)) return 1; + + /* + * Clear the MSR VSX bit to indicate there is no valid state attached + * to this context, except in the specific case below where we set it. + */ + msr &= ~MSR_VSX; #ifdef CONFIG_VSX /* * Copy VSR 0-31 upper half from thread_struct to local @@ -457,15 +463,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, if (copy_vsx_to_user(&frame->mc_vsregs, current)) return 1; msr |= MSR_VSX; - } else if (!ctx_has_vsx_region) - /* - * With a small context structure we can't hold the VSX - * registers, hence clear the MSR value to indicate the state - * was not saved. - */ - msr &= ~MSR_VSX; - - + } #endif /* CONFIG_VSX */ #ifdef CONFIG_SPE /* save spe registers */ diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index e66f67b8b9e6..42991045349f 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -122,6 +122,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); /* copy fpr regs and fpscr */ err |= copy_fpr_to_user(&sc->fp_regs, current); + + /* + * Clear the MSR VSX bit to indicate there is no valid state attached + * to this context, except in the specific case below where we set it. + */ + msr &= ~MSR_VSX; #ifdef CONFIG_VSX /* * Copy VSX low doubleword to local buffer for formatting, diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index 6b1f2a6d5517..6b2b69616e77 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -232,9 +232,15 @@ __do_get_tspec: lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) /* Get a stable TB value */ +#ifdef CONFIG_8xx +2: mftbu r3 + mftbl r4 + mftbu r0 +#else 2: mfspr r3, SPRN_TBRU mfspr r4, SPRN_TBRL mfspr r0, SPRN_TBRU +#endif cmplw cr0,r3,r0 bne- 2b diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c index 3bc700655fc8..74551b5e41e5 100644 --- a/arch/powerpc/mm/hugetlbpage-book3e.c +++ b/arch/powerpc/mm/hugetlbpage-book3e.c @@ -117,6 +117,5 @@ void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr) struct hstate *hstate = hstate_file(vma->vm_file); unsigned long tsize = huge_page_shift(hstate) - 10; - __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0); - + __flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0); } diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 41cd68dee681..358d74303138 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -305,7 +305,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { #ifdef CONFIG_HUGETLB_PAGE - if (is_vm_hugetlb_page(vma)) + if (vma && is_vm_hugetlb_page(vma)) flush_hugetlb_page(vma, vmaddr); #endif diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 132f8726a257..bca2465a9c34 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -404,13 +404,27 @@ config PPC_DOORBELL endmenu -config CPU_LITTLE_ENDIAN - bool "Build little endian kernel" - default n +choice + prompt "Endianness selection" + default CPU_BIG_ENDIAN help This option selects whether a big endian or little endian kernel will be built. +config CPU_BIG_ENDIAN + bool "Build big endian kernel" + help + Build a big endian kernel. + + If unsure, select this option. + +config CPU_LITTLE_ENDIAN + bool "Build little endian kernel" + help + Build a little endian kernel. + Note that if cross compiling a little endian kernel, CROSS_COMPILE must point to a toolchain capable of targeting little endian powerpc. + +endchoice diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h index f691d0e4d9fa..ff97430455cb 100644 --- a/drivers/acpi/acpica/acresrc.h +++ b/drivers/acpi/acpica/acresrc.h @@ -184,7 +184,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, struct acpi_buffer *output_buffer); acpi_status -acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, +acpi_rs_create_aml_resources(struct acpi_buffer *resource_list, struct acpi_buffer *output_buffer); acpi_status @@ -227,8 +227,8 @@ acpi_rs_get_list_length(u8 * aml_buffer, u32 aml_buffer_length, acpi_size * size_needed); acpi_status -acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer, - acpi_size * size_needed); +acpi_rs_get_aml_length(struct acpi_resource *resource_list, + acpi_size resource_list_size, acpi_size * size_needed); acpi_status acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index 243737363fb8..fd1ff54cda19 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -106,6 +106,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name) void acpi_ns_delete_node(struct acpi_namespace_node *node) { union acpi_operand_object *obj_desc; + union acpi_operand_object *next_desc; ACPI_FUNCTION_NAME(ns_delete_node); @@ -114,12 +115,13 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) acpi_ns_detach_object(node); /* - * Delete an attached data object if present (an object that was created - * and attached via acpi_attach_data). Note: After any normal object is - * detached above, the only possible remaining object is a data object. + * Delete an attached data object list if present (objects that were + * attached via acpi_attach_data). Note: After any normal object is + * detached above, the only possible remaining object(s) are data + * objects, in a linked list. */ obj_desc = node->object; - if (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) { + while (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) { /* Invoke the attached data deletion handler if present */ @@ -127,7 +129,15 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) obj_desc->data.handler(node, obj_desc->data.pointer); } + next_desc = obj_desc->common.next_object; acpi_ut_remove_reference(obj_desc); + obj_desc = next_desc; + } + + /* Special case for the statically allocated root node */ + + if (node == acpi_gbl_root_node) { + return; } /* Now we can delete the node */ diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index cc2fea94c5f0..4a0665b6bcc1 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -593,24 +593,26 @@ struct acpi_namespace_node *acpi_ns_validate_handle(acpi_handle handle) void acpi_ns_terminate(void) { - union acpi_operand_object *obj_desc; + acpi_status status; ACPI_FUNCTION_TRACE(ns_terminate); /* - * 1) Free the entire namespace -- all nodes and objects - * - * Delete all object descriptors attached to namepsace nodes + * Free the entire namespace -- all nodes and all objects + * attached to the nodes */ acpi_ns_delete_namespace_subtree(acpi_gbl_root_node); - /* Detach any objects attached to the root */ + /* Delete any objects attached to the root node */ - obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node); - if (obj_desc) { - acpi_ns_detach_object(acpi_gbl_root_node); + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_VOID; } + acpi_ns_delete_node(acpi_gbl_root_node); + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n")); return_VOID; } diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index b62a0f4f4f9b..b60c9cf82862 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -174,6 +174,7 @@ acpi_rs_stream_option_length(u32 resource_length, * FUNCTION: acpi_rs_get_aml_length * * PARAMETERS: resource - Pointer to the resource linked list + * resource_list_size - Size of the resource linked list * size_needed - Where the required size is returned * * RETURN: Status @@ -185,16 +186,20 @@ acpi_rs_stream_option_length(u32 resource_length, ******************************************************************************/ acpi_status -acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed) +acpi_rs_get_aml_length(struct acpi_resource *resource, + acpi_size resource_list_size, acpi_size * size_needed) { acpi_size aml_size_needed = 0; + struct acpi_resource *resource_end; acpi_rs_length total_size; ACPI_FUNCTION_TRACE(rs_get_aml_length); /* Traverse entire list of internal resource descriptors */ - while (resource) { + resource_end = + ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size); + while (resource < resource_end) { /* Validate the descriptor type */ diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index 65f3e1c5b598..3a2ace93e62c 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -418,22 +418,21 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, * * FUNCTION: acpi_rs_create_aml_resources * - * PARAMETERS: linked_list_buffer - Pointer to the resource linked list - * output_buffer - Pointer to the user's buffer + * PARAMETERS: resource_list - Pointer to the resource list buffer + * output_buffer - Where the AML buffer is returned * * RETURN: Status AE_OK if okay, else a valid acpi_status code. * If the output_buffer is too small, the error will be * AE_BUFFER_OVERFLOW and output_buffer->Length will point * to the size buffer needed. * - * DESCRIPTION: Takes the linked list of device resources and - * creates a bytestream to be used as input for the - * _SRS control method. + * DESCRIPTION: Converts a list of device resources to an AML bytestream + * to be used as input for the _SRS control method. * ******************************************************************************/ acpi_status -acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, +acpi_rs_create_aml_resources(struct acpi_buffer *resource_list, struct acpi_buffer *output_buffer) { acpi_status status; @@ -441,16 +440,16 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, ACPI_FUNCTION_TRACE(rs_create_aml_resources); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "LinkedListBuffer = %p\n", - linked_list_buffer)); + /* Params already validated, no need to re-validate here */ - /* - * Params already validated, so we don't re-validate here - * - * Pass the linked_list_buffer into a module that calculates - * the buffer size needed for the byte stream. - */ - status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ResourceList Buffer = %p\n", + resource_list->pointer)); + + /* Get the buffer size needed for the AML byte stream */ + + status = acpi_rs_get_aml_length(resource_list->pointer, + resource_list->length, + &aml_size_needed); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n", (u32)aml_size_needed, acpi_format_exception(status))); @@ -467,10 +466,9 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, /* Do the conversion */ - status = - acpi_rs_convert_resources_to_aml(linked_list_buffer, - aml_size_needed, - output_buffer->pointer); + status = acpi_rs_convert_resources_to_aml(resource_list->pointer, + aml_size_needed, + output_buffer->pointer); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index aef303d56d86..14a7982c9961 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -753,7 +753,7 @@ acpi_rs_set_srs_method_data(struct acpi_namespace_node *node, * Convert the linked list into a byte stream */ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; - status = acpi_rs_create_aml_resources(in_buffer->pointer, &buffer); + status = acpi_rs_create_aml_resources(in_buffer, &buffer); if (ACPI_FAILURE(status)) { goto cleanup; } diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index 1a67b3944b3b..03ae8affe48f 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -185,6 +185,7 @@ acpi_debug_print(u32 requested_debug_level, } acpi_gbl_prev_thread_id = thread_id; + acpi_gbl_nesting_level = 0; } /* @@ -193,13 +194,21 @@ acpi_debug_print(u32 requested_debug_level, */ acpi_os_printf("%9s-%04ld ", module_name, line_number); +#ifdef ACPI_EXEC_APP + /* + * For acpi_exec only, emit the thread ID and nesting level. + * Note: nesting level is really only useful during a single-thread + * execution. Otherwise, multiple threads will keep resetting the + * level. + */ if (ACPI_LV_THREADS & acpi_dbg_level) { acpi_os_printf("[%u] ", (u32)thread_id); } - acpi_os_printf("[%02ld] %-22.22s: ", - acpi_gbl_nesting_level, - acpi_ut_trim_function_name(function_name)); + acpi_os_printf("[%02ld] ", acpi_gbl_nesting_level); +#endif + + acpi_os_printf("%-22.22s: ", acpi_ut_trim_function_name(function_name)); va_start(args, format); acpi_os_vprintf(format, args); @@ -420,7 +429,9 @@ acpi_ut_exit(u32 line_number, component_id, "%s\n", acpi_gbl_fn_exit_str); } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } ACPI_EXPORT_SYMBOL(acpi_ut_exit) @@ -467,7 +478,9 @@ acpi_ut_status_exit(u32 line_number, } } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } ACPI_EXPORT_SYMBOL(acpi_ut_status_exit) @@ -504,7 +517,9 @@ acpi_ut_value_exit(u32 line_number, ACPI_FORMAT_UINT64(value)); } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } ACPI_EXPORT_SYMBOL(acpi_ut_value_exit) @@ -540,7 +555,9 @@ acpi_ut_ptr_exit(u32 line_number, ptr); } - acpi_gbl_nesting_level--; + if (acpi_gbl_nesting_level) { + acpi_gbl_nesting_level--; + } } #endif diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 266bc58ce0ce..386a9fe497b4 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -13,7 +13,6 @@ #include <linux/slab.h> #include <linux/acpi.h> #include <linux/acpi_io.h> -#include <acpi/acpiosxf.h> /* ACPI NVS regions, APEI may use it */ diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 0703bff5e60e..20360e480bd8 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -65,6 +65,9 @@ static struct acpi_scan_handler pci_root_handler = { .ids = root_device_ids, .attach = acpi_pci_root_add, .detach = acpi_pci_root_remove, + .hotplug = { + .ignore = true, + }, }; static DEFINE_MUTEX(osc_lock); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 15daa21fcd05..fd39459926b1 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1772,7 +1772,7 @@ static void acpi_scan_init_hotplug(acpi_handle handle, int type) */ list_for_each_entry(hwid, &pnp.ids, list) { handler = acpi_scan_match_handler(hwid->id, NULL); - if (handler) { + if (handler && !handler->hotplug.ignore) { acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, acpi_hotplug_notify_cb, handler); break; diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 14df30580e15..721e949e606e 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -525,7 +525,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) * generate wakeup events. */ if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) { - acpi_event_status pwr_btn_status; + acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED; acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status); diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index db5293650f62..6dbc3ca45223 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -309,7 +309,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, sprintf(table_attr->name + ACPI_NAME_SIZE, "%d", table_attr->instance); - table_attr->attr.size = 0; + table_attr->attr.size = table_header->length; table_attr->attr.read = acpi_table_show; table_attr->attr.attr.name = table_attr->name; table_attr->attr.attr.mode = 0400; @@ -354,8 +354,9 @@ static int acpi_tables_sysfs_init(void) { struct acpi_table_attr *table_attr; struct acpi_table_header *table_header = NULL; - int table_index = 0; - int result; + int table_index; + acpi_status status; + int ret; tables_kobj = kobject_create_and_add("tables", acpi_kobj); if (!tables_kobj) @@ -365,33 +366,34 @@ static int acpi_tables_sysfs_init(void) if (!dynamic_tables_kobj) goto err_dynamic_tables; - do { - result = acpi_get_table_by_index(table_index, &table_header); - if (!result) { - table_index++; - table_attr = NULL; - table_attr = - kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL); - if (!table_attr) - return -ENOMEM; - - acpi_table_attr_init(table_attr, table_header); - result = - sysfs_create_bin_file(tables_kobj, - &table_attr->attr); - if (result) { - kfree(table_attr); - return result; - } else - list_add_tail(&table_attr->node, - &acpi_table_attr_list); + for (table_index = 0;; table_index++) { + status = acpi_get_table_by_index(table_index, &table_header); + + if (status == AE_BAD_PARAMETER) + break; + + if (ACPI_FAILURE(status)) + continue; + + table_attr = NULL; + table_attr = kzalloc(sizeof(*table_attr), GFP_KERNEL); + if (!table_attr) + return -ENOMEM; + + acpi_table_attr_init(table_attr, table_header); + ret = sysfs_create_bin_file(tables_kobj, &table_attr->attr); + if (ret) { + kfree(table_attr); + return ret; } - } while (!result); + list_add_tail(&table_attr->node, &acpi_table_attr_list); + } + kobject_uevent(tables_kobj, KOBJ_ADD); kobject_uevent(dynamic_tables_kobj, KOBJ_ADD); - result = acpi_install_table_handler(acpi_sysfs_table_handler, NULL); + status = acpi_install_table_handler(acpi_sysfs_table_handler, NULL); - return result == AE_OK ? 0 : -EINVAL; + return ACPI_FAILURE(status) ? -EINVAL : 0; err_dynamic_tables: kobject_put(tables_kobj); err: diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index f2c75065ce19..dfd1643b0b2f 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -157,4 +157,3 @@ err_moutcore: pr_debug("%s: failed initialization\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(exynos4210_cpufreq_init); diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 8683304ce62c..efad5e657f6f 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -211,4 +211,3 @@ err_moutcore: pr_debug("%s: failed initialization\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(exynos4x12_cpufreq_init); diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c index 9fae466d7746..8feda86fe42c 100644 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ b/drivers/cpufreq/exynos5250-cpufreq.c @@ -236,4 +236,3 @@ err_moutcore: pr_err("%s: failed initialization\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(exynos5250_cpufreq_init); diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index f42df7ec03c5..b7309c37033d 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -142,10 +142,8 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index) mutex_lock(&tegra_cpu_lock); - if (is_suspended) { - ret = -EBUSY; + if (is_suspended) goto out; - } freq = freq_table[index].frequency; diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c index 72c927dc3be1..54c18c220a60 100644 --- a/drivers/gpio/gpio-bcm-kona.c +++ b/drivers/gpio/gpio-bcm-kona.c @@ -158,7 +158,7 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio) spin_unlock_irqrestore(&kona_gpio->lock, flags); /* return the specified bit status */ - return !!(val & bit); + return !!(val & BIT(bit)); } static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c index f7a0cc4da950..7b37300973db 100644 --- a/drivers/gpio/gpio-msm-v2.c +++ b/drivers/gpio/gpio-msm-v2.c @@ -102,7 +102,7 @@ struct msm_gpio_dev { DECLARE_BITMAP(wake_irqs, MAX_NR_GPIO); DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO); struct irq_domain *domain; - unsigned int summary_irq; + int summary_irq; void __iomem *msm_tlmm_base; }; diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 3c3321f94053..db3129043e63 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -79,7 +79,7 @@ struct mvebu_gpio_chip { spinlock_t lock; void __iomem *membase; void __iomem *percpu_membase; - unsigned int irqbase; + int irqbase; struct irq_domain *domain; int soc_variant; }; diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index f22f7f3e2e53..b4d42112d02d 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -286,11 +286,6 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) if (!chip->base) return -ENOMEM; - chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR, - irq_base, &pl061_domain_ops, chip); - if (!chip->domain) - return -ENODEV; - spin_lock_init(&chip->lock); chip->gc.request = pl061_gpio_request; @@ -320,6 +315,11 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) irq_set_chained_handler(irq, pl061_irq_handler); irq_set_handler_data(irq, chip); + chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR, + irq_base, &pl061_domain_ops, chip); + if (!chip->domain) + return -ENODEV; + for (i = 0; i < PL061_GPIO_NR; i++) { if (pdata) { if (pdata->directions & (1 << i)) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index d3f15ae93bd3..fe088a30567a 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -381,7 +381,7 @@ static int gpio_rcar_probe(struct platform_device *pdev) if (!p->irq_domain) { ret = -ENXIO; dev_err(&pdev->dev, "cannot initialize irq domain\n"); - goto err1; + goto err0; } if (devm_request_irq(&pdev->dev, irq->start, diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c index 0502b9a041a5..da071ddbad99 100644 --- a/drivers/gpio/gpio-tb10x.c +++ b/drivers/gpio/gpio-tb10x.c @@ -132,6 +132,7 @@ static int tb10x_gpio_direction_out(struct gpio_chip *chip, int mask = BIT(offset); int val = TB10X_GPIO_DIR_OUT << offset; + tb10x_gpio_set(chip, offset, value); tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val); return 0; diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c index 1a605f2a0f55..06fb5cf99ded 100644 --- a/drivers/gpio/gpio-ucb1400.c +++ b/drivers/gpio/gpio-ucb1400.c @@ -105,3 +105,4 @@ module_platform_driver(ucb1400_gpio_driver); MODULE_DESCRIPTION("Philips UCB1400 GPIO driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ucb1400_gpio"); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 4e10b10d3ddd..ac53a9593662 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -14,6 +14,7 @@ #include <linux/idr.h> #include <linux/slab.h> #include <linux/acpi.h> +#include <linux/gpio/driver.h> #define CREATE_TRACE_POINTS #include <trace/events/gpio.h> @@ -1308,6 +1309,18 @@ struct gpio_chip *gpiochip_find(void *data, } EXPORT_SYMBOL_GPL(gpiochip_find); +static int gpiochip_match_name(struct gpio_chip *chip, void *data) +{ + const char *name = data; + + return !strcmp(chip->label, name); +} + +static struct gpio_chip *find_chip_by_name(const char *name) +{ + return gpiochip_find((void *)name, gpiochip_match_name); +} + #ifdef CONFIG_PINCTRL /** @@ -1341,8 +1354,10 @@ int gpiochip_add_pingroup_range(struct gpio_chip *chip, ret = pinctrl_get_group_pins(pctldev, pin_group, &pin_range->range.pins, &pin_range->range.npins); - if (ret < 0) + if (ret < 0) { + kfree(pin_range); return ret; + } pinctrl_add_gpio_range(pctldev, &pin_range->range); @@ -2260,26 +2275,10 @@ void gpiod_add_table(struct gpiod_lookup *table, size_t size) mutex_unlock(&gpio_lookup_lock); } -/* - * Caller must have a acquired gpio_lookup_lock - */ -static struct gpio_chip *find_chip_by_name(const char *name) -{ - struct gpio_chip *chip = NULL; - - list_for_each_entry(chip, &gpio_lookup_list, list) { - if (chip->label == NULL) - continue; - if (!strcmp(chip->label, name)) - break; - } - - return chip; -} - #ifdef CONFIG_OF static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { char prop_name[32]; /* 32 is max size of property name */ enum of_gpio_flags of_flags; @@ -2297,20 +2296,22 @@ static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, return desc; if (of_flags & OF_GPIO_ACTIVE_LOW) - *flags |= GPIOF_ACTIVE_LOW; + *flags |= GPIO_ACTIVE_LOW; return desc; } #else static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { return ERR_PTR(-ENODEV); } #endif static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { struct acpi_gpio_info info; struct gpio_desc *desc; @@ -2320,13 +2321,14 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id, return desc; if (info.gpioint && info.active_low) - *flags |= GPIOF_ACTIVE_LOW; + *flags |= GPIO_ACTIVE_LOW; return desc; } static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) + unsigned int idx, + enum gpio_lookup_flags *flags) { const char *dev_id = dev ? dev_name(dev) : NULL; struct gpio_desc *desc = ERR_PTR(-ENODEV); @@ -2418,7 +2420,7 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, { struct gpio_desc *desc; int status; - unsigned long flags = 0; + enum gpio_lookup_flags flags = 0; dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id); @@ -2444,8 +2446,12 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, if (status < 0) return ERR_PTR(status); - if (flags & GPIOF_ACTIVE_LOW) + if (flags & GPIO_ACTIVE_LOW) set_bit(FLAG_ACTIVE_LOW, &desc->flags); + if (flags & GPIO_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + if (flags & GPIO_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &desc->flags); return desc; } diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 329fbb9b5976..34e2d39d4ce8 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -460,6 +460,7 @@ config HID_MULTITOUCH - Stantum multitouch panels - Touch International Panels - Unitec Panels + - Wistron optical touch panels - XAT optical touch panels - Xiroku optical touch panels - Zytronic touch panels diff --git a/drivers/hid/hid-appleir.c b/drivers/hid/hid-appleir.c index a42e6a394c5e..0e6a42d37eb6 100644 --- a/drivers/hid/hid-appleir.c +++ b/drivers/hid/hid-appleir.c @@ -297,6 +297,9 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id) appleir->hid = hid; + /* force input as some remotes bypass the input registration */ + hid->quirks |= HID_QUIRK_HIDINPUT_FORCE; + spin_lock_init(&appleir->lock); setup_timer(&appleir->key_up_timer, key_up_tick, (unsigned long) appleir); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8c10f2742233..253fe23ef7fe 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1723,6 +1723,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_MANTICORE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) }, @@ -1879,7 +1880,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) }, { } }; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 76559629568c..f9304cb37154 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -489,6 +489,7 @@ #define USB_VENDOR_ID_KYE 0x0458 #define USB_DEVICE_ID_KYE_ERGO_525V 0x0087 #define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE 0x0138 +#define USB_DEVICE_ID_GENIUS_MANTICORE 0x0153 #define USB_DEVICE_ID_GENIUS_GX_IMPERATOR 0x4018 #define USB_DEVICE_ID_KYE_GPEN_560 0x5003 #define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010 @@ -640,7 +641,6 @@ #define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003 #define USB_VENDOR_ID_NINTENDO 0x057e -#define USB_VENDOR_ID_NINTENDO2 0x054c #define USB_DEVICE_ID_NINTENDO_WIIMOTE 0x0306 #define USB_DEVICE_ID_NINTENDO_WIIMOTE2 0x0330 @@ -902,6 +902,9 @@ #define USB_DEVICE_ID_SUPER_DUAL_BOX_PRO 0x8802 #define USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO 0x8804 +#define USB_VENDOR_ID_WISTRON 0x0fb8 +#define USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH 0x1109 + #define USB_VENDOR_ID_X_TENSIONS 0x1ae7 #define USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE 0x9001 diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c index 73845120295e..ecb5ca669e97 100644 --- a/drivers/hid/hid-kye.c +++ b/drivers/hid/hid-kye.c @@ -341,6 +341,9 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, case USB_DEVICE_ID_GENIUS_GX_IMPERATOR: rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83, "Genius Gx Imperator Keyboard"); + case USB_DEVICE_ID_GENIUS_MANTICORE: + rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104, + "Genius Manticore Keyboard"); break; } return rdesc; @@ -418,6 +421,14 @@ static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id) goto enabling_err; } break; + case USB_DEVICE_ID_GENIUS_MANTICORE: + /* + * The manticore keyboard needs to have all the interfaces + * opened at least once to be fully functional. + */ + if (hid_hw_open(hdev)) + hid_hw_close(hdev); + break; } return 0; @@ -439,6 +450,8 @@ static const struct hid_device_id kye_devices[] = { USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KYE, + USB_DEVICE_ID_GENIUS_MANTICORE) }, { } }; MODULE_DEVICE_TABLE(hid, kye_devices); diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index a2cedb8ae1c0..d83b1e8b505b 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1335,6 +1335,12 @@ static const struct hid_device_id mt_devices[] = { { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) }, + + /* Wistron panels */ + { .driver_data = MT_CLS_NSMU, + MT_USB_DEVICE(USB_VENDOR_ID_WISTRON, + USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH) }, + /* XAT */ { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_XAT, diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index da551d113762..098af2f84b8c 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -225,6 +225,13 @@ static const unsigned int buzz_keymap[] = { struct sony_sc { unsigned long quirks; +#ifdef CONFIG_SONY_FF + struct work_struct rumble_worker; + struct hid_device *hdev; + __u8 left; + __u8 right; +#endif + void *extra; }; @@ -615,9 +622,9 @@ static void buzz_remove(struct hid_device *hdev) } #ifdef CONFIG_SONY_FF -static int sony_play_effect(struct input_dev *dev, void *data, - struct ff_effect *effect) +static void sony_rumble_worker(struct work_struct *work) { + struct sony_sc *sc = container_of(work, struct sony_sc, rumble_worker); unsigned char buf[] = { 0x01, 0x00, 0xff, 0x00, 0xff, 0x00, @@ -628,21 +635,28 @@ static int sony_play_effect(struct input_dev *dev, void *data, 0xff, 0x27, 0x10, 0x00, 0x32, 0x00, 0x00, 0x00, 0x00, 0x00 }; - __u8 left; - __u8 right; + + buf[3] = sc->right; + buf[5] = sc->left; + + sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf), + HID_OUTPUT_REPORT); +} + +static int sony_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ struct hid_device *hid = input_get_drvdata(dev); + struct sony_sc *sc = hid_get_drvdata(hid); if (effect->type != FF_RUMBLE) return 0; - left = effect->u.rumble.strong_magnitude / 256; - right = effect->u.rumble.weak_magnitude ? 1 : 0; - - buf[3] = right; - buf[5] = left; + sc->left = effect->u.rumble.strong_magnitude / 256; + sc->right = effect->u.rumble.weak_magnitude ? 1 : 0; - return hid->hid_output_raw_report(hid, buf, sizeof(buf), - HID_OUTPUT_REPORT); + schedule_work(&sc->rumble_worker); + return 0; } static int sony_init_ff(struct hid_device *hdev) @@ -650,16 +664,31 @@ static int sony_init_ff(struct hid_device *hdev) struct hid_input *hidinput = list_entry(hdev->inputs.next, struct hid_input, list); struct input_dev *input_dev = hidinput->input; + struct sony_sc *sc = hid_get_drvdata(hdev); + + sc->hdev = hdev; + INIT_WORK(&sc->rumble_worker, sony_rumble_worker); input_set_capability(input_dev, EV_FF, FF_RUMBLE); return input_ff_create_memless(input_dev, NULL, sony_play_effect); } +static void sony_destroy_ff(struct hid_device *hdev) +{ + struct sony_sc *sc = hid_get_drvdata(hdev); + + cancel_work_sync(&sc->rumble_worker); +} + #else static int sony_init_ff(struct hid_device *hdev) { return 0; } + +static void sony_destroy_ff(struct hid_device *hdev) +{ +} #endif static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) @@ -728,6 +757,8 @@ static void sony_remove(struct hid_device *hdev) if (sc->quirks & BUZZ_CONTROLLER) buzz_remove(hdev); + sony_destroy_ff(hdev); + hid_hw_stop(hdev); } diff --git a/drivers/hid/hid-wiimote-core.c b/drivers/hid/hid-wiimote-core.c index 1446f526ee8b..abb20db2b443 100644 --- a/drivers/hid/hid-wiimote-core.c +++ b/drivers/hid/hid-wiimote-core.c @@ -834,8 +834,7 @@ static void wiimote_init_set_type(struct wiimote_data *wdata, goto done; } - if (vendor == USB_VENDOR_ID_NINTENDO || - vendor == USB_VENDOR_ID_NINTENDO2) { + if (vendor == USB_VENDOR_ID_NINTENDO) { if (product == USB_DEVICE_ID_NINTENDO_WIIMOTE) { devtype = WIIMOTE_DEV_GEN10; goto done; @@ -1856,8 +1855,6 @@ static void wiimote_hid_remove(struct hid_device *hdev) static const struct hid_device_id wiimote_hid_devices[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2, - USB_DEVICE_ID_NINTENDO_WIIMOTE) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) }, { } diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 93b00d76374c..cedc6da93c19 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -287,7 +287,7 @@ static int uhid_event_from_user(const char __user *buffer, size_t len, */ struct uhid_create_req_compat *compat; - compat = kmalloc(sizeof(*compat), GFP_KERNEL); + compat = kzalloc(sizeof(*compat), GFP_KERNEL); if (!compat) return -ENOMEM; diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 1d7ff46812c3..dafc63c6932d 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -18,7 +18,6 @@ #include <linux/err.h> #include <acpi/acpi.h> -#include <acpi/acpixf.h> #include <acpi/acpi_drivers.h> #include <acpi/acpi_bus.h> diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index dcda17395c4e..1cae4e920c9b 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -350,7 +350,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&accel_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -363,10 +363,11 @@ static int hid_accel_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct accel_3d_state *accel_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&accel_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index d72118d1189c..98ba761cbb9c 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -112,9 +112,10 @@ static int kxsd9_read(struct iio_dev *indio_dev, u8 address) mutex_lock(&st->buf_lock); st->tx[0] = KXSD9_READ(address); ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers)); - if (ret) - return ret; - return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0); + if (!ret) + ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0); + mutex_unlock(&st->buf_lock); + return ret; } static IIO_CONST_ATTR(accel_scale_available, diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 17df74908db1..5b1aa027c034 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -1047,6 +1047,7 @@ static int at91_adc_probe(struct platform_device *pdev) } else { if (!st->caps->has_tsmr) { dev_err(&pdev->dev, "We don't support non-TSMR adc\n"); + ret = -ENODEV; goto error_disable_adc_clk; } diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 12948325431c..c8c1baaec6c1 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -88,10 +88,10 @@ static const int mcp3422_sample_rates[4] = { /* sample rates to sign extension table */ static const int mcp3422_sign_extend[4] = { - [MCP3422_SRATE_240] = 12, - [MCP3422_SRATE_60] = 14, - [MCP3422_SRATE_15] = 16, - [MCP3422_SRATE_3] = 18 }; + [MCP3422_SRATE_240] = 11, + [MCP3422_SRATE_60] = 13, + [MCP3422_SRATE_15] = 15, + [MCP3422_SRATE_3] = 17 }; /* Client data (each client gets its own) */ struct mcp3422 { diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 728411ec7642..d4d748214e4b 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -229,12 +229,15 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev, unsigned long flags, const struct iio_buffer_setup_ops *setup_ops) { + struct iio_buffer *buffer; int ret; - indio_dev->buffer = iio_kfifo_allocate(indio_dev); - if (!indio_dev->buffer) + buffer = iio_kfifo_allocate(indio_dev); + if (!buffer) return -ENOMEM; + iio_device_attach_buffer(indio_dev, buffer); + ret = request_threaded_irq(irq, pollfunc_th, pollfunc_bh, flags, indio_dev->name, indio_dev); if (ret) diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index b6e77e0fc420..bbd6426c9726 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -55,11 +55,10 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig, return 0; } -void hid_sensor_remove_trigger(struct iio_dev *indio_dev) +void hid_sensor_remove_trigger(struct hid_sensor_common *attrb) { - iio_trigger_unregister(indio_dev->trig); - iio_trigger_free(indio_dev->trig); - indio_dev->trig = NULL; + iio_trigger_unregister(attrb->trigger); + iio_trigger_free(attrb->trigger); } EXPORT_SYMBOL(hid_sensor_remove_trigger); @@ -90,7 +89,7 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name, dev_err(&indio_dev->dev, "Trigger Register Failed\n"); goto error_free_trig; } - indio_dev->trig = trig; + indio_dev->trig = attrb->trigger = trig; return ret; diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h index 9a8731478eda..ca02f7811aa8 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h @@ -21,6 +21,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name, struct hid_sensor_common *attrb); -void hid_sensor_remove_trigger(struct iio_dev *indio_dev); +void hid_sensor_remove_trigger(struct hid_sensor_common *attrb); #endif diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index ea01c6bcfb56..e54f0f4959d3 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -348,7 +348,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&gyro_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -361,10 +361,11 @@ static int hid_gyro_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct gyro_3d_state *gyro_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&gyro_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index f98c2b509254..b0d65df3ede2 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -81,6 +81,8 @@ config SENSORS_LM3533 config TCS3472 tristate "TAOS TCS3472 color light-to-digital converter" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the TAOS TCS3472 family of color light-to-digital converters with IR filter. diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index fa6ae8cf89ea..8e8b9d722853 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -314,7 +314,7 @@ static int hid_als_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&als_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -327,10 +327,11 @@ static int hid_als_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct als_state *als_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&als_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 0cf09637b35b..d86d226dcd67 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -19,6 +19,8 @@ config AK8975 config MAG3110 tristate "Freescale MAG3110 3-Axis Magnetometer" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for the Freescale MAG3110 3-Axis magnetometer. diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index 2634920562fb..b26e1028a0a0 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -351,7 +351,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev) error_iio_unreg: iio_device_unregister(indio_dev); error_remove_trigger: - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&magn_state->common_attributes); error_unreg_buffer_funcs: iio_triggered_buffer_cleanup(indio_dev); error_free_dev_mem: @@ -364,10 +364,11 @@ static int hid_magn_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct magn_3d_state *magn_state = iio_priv(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D); iio_device_unregister(indio_dev); - hid_sensor_remove_trigger(indio_dev); + hid_sensor_remove_trigger(&magn_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); kfree(indio_dev->channels); diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c index 783c5b417356..becf54496967 100644 --- a/drivers/iio/magnetometer/mag3110.c +++ b/drivers/iio/magnetometer/mag3110.c @@ -250,7 +250,12 @@ done: .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ BIT(IIO_CHAN_INFO_SCALE), \ .scan_index = idx, \ - .scan_type = IIO_ST('s', 16, 16, IIO_BE), \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ } static const struct iio_chan_spec mag3110_channels[] = { diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 6753b65f8ede..d2f0120bc878 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_WINDFARM_RM31) += windfarm_fcu_controls.o \ windfarm_ad7417_sensor.o \ windfarm_lm75_sensor.o \ windfarm_lm87_sensor.o \ + windfarm_max6690_sensor.o \ windfarm_pid.o \ windfarm_cpufreq_clamp.o \ windfarm_rm31.o diff --git a/drivers/md/md.c b/drivers/md/md.c index b6b7a2866c9e..e60cebf3f519 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7777,7 +7777,7 @@ void md_check_recovery(struct mddev *mddev) if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; if ( ! ( - (mddev->flags & ~ (1<<MD_CHANGE_PENDING)) || + (mddev->flags & MD_UPDATE_SB_FLAGS & ~ (1<<MD_CHANGE_PENDING)) || test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) || test_bit(MD_RECOVERY_DONE, &mddev->recovery) || (mddev->external == 0 && mddev->safemode == 1) || diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 47da0af6322b..cc055da02e2a 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -678,26 +678,23 @@ get_active_stripe(struct r5conf *conf, sector_t sector, } else init_stripe(sh, sector, previous); } else { + spin_lock(&conf->device_lock); if (atomic_read(&sh->count)) { BUG_ON(!list_empty(&sh->lru) && !test_bit(STRIPE_EXPANDING, &sh->state) && !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state) - && !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state)); + ); } else { - spin_lock(&conf->device_lock); if (!test_bit(STRIPE_HANDLE, &sh->state)) atomic_inc(&conf->active_stripes); - if (list_empty(&sh->lru) && - !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state) && - !test_bit(STRIPE_EXPANDING, &sh->state)) - BUG(); + BUG_ON(list_empty(&sh->lru)); list_del_init(&sh->lru); if (sh->group) { sh->group->stripes_cnt--; sh->group = NULL; } - spin_unlock(&conf->device_lock); } + spin_unlock(&conf->device_lock); } } while (sh == NULL); @@ -5471,7 +5468,7 @@ static int alloc_thread_groups(struct r5conf *conf, int cnt, for (i = 0; i < *group_cnt; i++) { struct r5worker_group *group; - group = worker_groups[i]; + group = &(*worker_groups)[i]; INIT_LIST_HEAD(&group->handle_list); group->conf = conf; group->workers = workers + i * cnt; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b3b1b9aa8863..3a02717473ad 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -9,10 +9,6 @@ * * Init/reset quirks for USB host controllers should be in the * USB quirks file, where their drivers can access reuse it. - * - * The bridge optimization stuff has been removed. If you really - * have a silly BIOS which is unable to set your host bridge right, - * use the PowerTweak utility (see http://powertweak.sourceforge.net). */ #include <linux/types.h> diff --git a/drivers/staging/btmtk_usb/btmtk_usb.c b/drivers/staging/btmtk_usb/btmtk_usb.c index 7a9bf3b57810..9a5ebd6cc512 100644 --- a/drivers/staging/btmtk_usb/btmtk_usb.c +++ b/drivers/staging/btmtk_usb/btmtk_usb.c @@ -1284,9 +1284,8 @@ done: kfree_skb(skb); } -static int btmtk_usb_send_frame(struct sk_buff *skb) +static int btmtk_usb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { - struct hci_dev *hdev = (struct hci_dev *)skb->dev; struct btmtk_usb_data *data = hci_get_drvdata(hdev); struct usb_ctrlrequest *dr; struct urb *urb; diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c index d041b714db29..2baaf1db6fbf 100644 --- a/drivers/staging/comedi/drivers/pcl730.c +++ b/drivers/staging/comedi/drivers/pcl730.c @@ -173,11 +173,11 @@ static int pcl730_do_insn_bits(struct comedi_device *dev, if (mask) { if (mask & 0x00ff) outb(s->state & 0xff, dev->iobase + reg); - if ((mask & 0xff00) & (s->n_chan > 8)) + if ((mask & 0xff00) && (s->n_chan > 8)) outb((s->state >> 8) & 0xff, dev->iobase + reg + 1); - if ((mask & 0xff0000) & (s->n_chan > 16)) + if ((mask & 0xff0000) && (s->n_chan > 16)) outb((s->state >> 16) & 0xff, dev->iobase + reg + 2); - if ((mask & 0xff000000) & (s->n_chan > 24)) + if ((mask & 0xff000000) && (s->n_chan > 24)) outb((s->state >> 24) & 0xff, dev->iobase + reg + 3); } diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c index 6815cfe2664e..b486099b543d 100644 --- a/drivers/staging/comedi/drivers/s626.c +++ b/drivers/staging/comedi/drivers/s626.c @@ -494,7 +494,7 @@ static void s626_send_dac(struct comedi_device *dev, uint32_t val) * Private helper function: Write setpoint to an application DAC channel. */ static void s626_set_dac(struct comedi_device *dev, uint16_t chan, - unsigned short dacdata) + int16_t dacdata) { struct s626_private *devpriv = dev->private; uint16_t signmask; diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index 933b01a0f03d..0adf3cffddb0 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -465,7 +465,7 @@ static int vmk80xx_do_insn_bits(struct comedi_device *dev, unsigned char *rx_buf = devpriv->usb_rx_buf; unsigned char *tx_buf = devpriv->usb_tx_buf; int reg, cmd; - int ret; + int ret = 0; if (devpriv->model == VMK8061_MODEL) { reg = VMK8061_DO_REG; diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c index 68ded17c0f5c..12f333fa59b5 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c @@ -578,7 +578,7 @@ static int request_code_segment(struct ft1000_usb *ft1000dev, u16 **s_file, u8 **c_file, const u8 *endpoint, bool boot_case) { long word_length; - int status; + int status = 0; /*DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");i*/ word_length = get_request_value(ft1000dev); @@ -1074,4 +1074,3 @@ int scram_dnldr(struct ft1000_usb *ft1000dev, void *pFileStart, return status; } - diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig index a3ea69e9d800..34634da1f9f7 100644 --- a/drivers/staging/iio/magnetometer/Kconfig +++ b/drivers/staging/iio/magnetometer/Kconfig @@ -6,6 +6,8 @@ menu "Magnetometer sensors" config SENSORS_HMC5843 tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here to add support for the Honeywell HMC5843, HMC5883 and HMC5883L 3-Axis Magnetometer (digital compass). diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile index 2c3a9e178fb5..8742432d7b01 100644 --- a/drivers/staging/imx-drm/Makefile +++ b/drivers/staging/imx-drm/Makefile @@ -8,4 +8,6 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o obj-$(CONFIG_DRM_IMX_FB_HELPER) += imx-fbdev.o obj-$(CONFIG_DRM_IMX_IPUV3_CORE) += ipu-v3/ -obj-$(CONFIG_DRM_IMX_IPUV3) += ipuv3-crtc.o ipuv3-plane.o + +imx-ipuv3-crtc-objs := ipuv3-crtc.o ipuv3-plane.o +obj-$(CONFIG_DRM_IMX_IPUV3) += imx-ipuv3-crtc.o diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index 51aa9772f959..6bd015ac9d68 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -72,6 +72,7 @@ int imx_drm_crtc_id(struct imx_drm_crtc *crtc) { return crtc->pipe; } +EXPORT_SYMBOL_GPL(imx_drm_crtc_id); static void imx_drm_driver_lastclose(struct drm_device *drm) { diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c index 5dec771d70ee..4d340f4a2198 100644 --- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c +++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c @@ -409,8 +409,8 @@ int ptlrpc_stop_pinger(void) struct l_wait_info lwi = { 0 }; int rc = 0; - if (!thread_is_init(&pinger_thread) && - !thread_is_stopped(&pinger_thread)) + if (thread_is_init(&pinger_thread) || + thread_is_stopped(&pinger_thread)) return -EALREADY; ptlrpc_pinger_remove_timeouts(); diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c index 58684da45e6c..b658c2316df3 100644 --- a/drivers/staging/media/go7007/go7007-usb.c +++ b/drivers/staging/media/go7007/go7007-usb.c @@ -15,6 +15,8 @@ * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -661,7 +663,7 @@ static int go7007_usb_interface_reset(struct go7007 *go) if (usb->board->flags & GO7007_USB_EZUSB) { /* Reset buffer in EZ-USB */ - dev_dbg(go->dev, "resetting EZ-USB buffers\n"); + pr_debug("resetting EZ-USB buffers\n"); if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 || go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0) return -1; @@ -689,7 +691,7 @@ static int go7007_usb_ezusb_write_interrupt(struct go7007 *go, u16 status_reg = 0; int timeout = 500; - dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data); + pr_debug("WriteInterrupt: %04x %04x\n", addr, data); for (i = 0; i < 100; ++i) { r = usb_control_msg(usb->usbdev, @@ -734,7 +736,7 @@ static int go7007_usb_onboard_write_interrupt(struct go7007 *go, int r; int timeout = 500; - dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data); + pr_debug("WriteInterrupt: %04x %04x\n", addr, data); go->usb_buf[0] = data & 0xff; go->usb_buf[1] = data >> 8; @@ -771,7 +773,7 @@ static void go7007_usb_readinterrupt_complete(struct urb *urb) go->interrupt_available = 1; go->interrupt_data = __le16_to_cpu(regs[0]); go->interrupt_value = __le16_to_cpu(regs[1]); - dev_dbg(go->dev, "ReadInterrupt: %04x %04x\n", + pr_debug("ReadInterrupt: %04x %04x\n", go->interrupt_value, go->interrupt_data); } @@ -891,7 +893,7 @@ static int go7007_usb_send_firmware(struct go7007 *go, u8 *data, int len) int transferred, pipe; int timeout = 500; - dev_dbg(go->dev, "DownloadBuffer sending %d bytes\n", len); + pr_debug("DownloadBuffer sending %d bytes\n", len); if (usb->board->flags & GO7007_USB_EZUSB) pipe = usb_sndbulkpipe(usb->usbdev, 2); @@ -977,7 +979,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter, !(msgs[i].flags & I2C_M_RD) && (msgs[i + 1].flags & I2C_M_RD)) { #ifdef GO7007_I2C_DEBUG - dev_dbg(go->dev, "i2c write/read %d/%d bytes on %02x\n", + pr_debug("i2c write/read %d/%d bytes on %02x\n", msgs[i].len, msgs[i + 1].len, msgs[i].addr); #endif buf[0] = 0x01; @@ -988,7 +990,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter, buf[buf_len++] = msgs[++i].len; } else if (msgs[i].flags & I2C_M_RD) { #ifdef GO7007_I2C_DEBUG - dev_dbg(go->dev, "i2c read %d bytes on %02x\n", + pr_debug("i2c read %d bytes on %02x\n", msgs[i].len, msgs[i].addr); #endif buf[0] = 0x01; @@ -998,7 +1000,7 @@ static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter, buf_len = 4; } else { #ifdef GO7007_I2C_DEBUG - dev_dbg(go->dev, "i2c write %d bytes on %02x\n", + pr_debug("i2c write %d bytes on %02x\n", msgs[i].len, msgs[i].addr); #endif buf[0] = 0x00; @@ -1057,7 +1059,7 @@ static int go7007_usb_probe(struct usb_interface *intf, char *name; int video_pipe, i, v_urb_len; - dev_dbg(go->dev, "probing new GO7007 USB board\n"); + pr_debug("probing new GO7007 USB board\n"); switch (id->driver_info) { case GO7007_BOARDID_MATRIX_II: @@ -1097,13 +1099,13 @@ static int go7007_usb_probe(struct usb_interface *intf, board = &board_px_tv402u; break; case GO7007_BOARDID_LIFEVIEW_LR192: - dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n"); + dev_err(&intf->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n"); return -ENODEV; name = "Lifeview TV Walker Ultra"; board = &board_lifeview_lr192; break; case GO7007_BOARDID_SENSORAY_2250: - dev_info(go->dev, "Sensoray 2250 found\n"); + dev_info(&intf->dev, "Sensoray 2250 found\n"); name = "Sensoray 2250/2251"; board = &board_sensoray_2250; break; @@ -1112,7 +1114,7 @@ static int go7007_usb_probe(struct usb_interface *intf, board = &board_ads_usbav_709; break; default: - dev_err(go->dev, "unknown board ID %d!\n", + dev_err(&intf->dev, "unknown board ID %d!\n", (unsigned int)id->driver_info); return -ENODEV; } @@ -1247,7 +1249,7 @@ static int go7007_usb_probe(struct usb_interface *intf, sizeof(go->name)); break; default: - dev_dbg(go->dev, "unable to detect tuner type!\n"); + pr_debug("unable to detect tuner type!\n"); break; } /* Configure tuner mode selection inputs connected diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 3066ee2e753b..49ea76b3435d 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -681,7 +681,8 @@ static irqreturn_t nvec_interrupt(int irq, void *dev) dev_err(nvec->dev, "RX buffer overflow on %p: " "Trying to write byte %u of %u\n", - nvec->rx, nvec->rx->pos, NVEC_MSG_SIZE); + nvec->rx, nvec->rx ? nvec->rx->pos : 0, + NVEC_MSG_SIZE); break; default: nvec->state = 0; diff --git a/drivers/staging/rtl8188eu/core/rtw_ap.c b/drivers/staging/rtl8188eu/core/rtw_ap.c index 2c678f409573..2f548ebada59 100644 --- a/drivers/staging/rtl8188eu/core/rtw_ap.c +++ b/drivers/staging/rtl8188eu/core/rtw_ap.c @@ -1115,6 +1115,9 @@ int rtw_check_beacon_data(struct adapter *padapter, u8 *pbuf, int len) return _FAIL; } + /* fix bug of flush_cam_entry at STOP AP mode */ + psta->state |= WIFI_AP_STATE; + rtw_indicate_connect(padapter); pmlmepriv->cur_network.join_res = true;/* for check if already set beacon */ return ret; } diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig index 165b918b8171..1b6d581c438b 100644 --- a/drivers/staging/tidspbridge/Kconfig +++ b/drivers/staging/tidspbridge/Kconfig @@ -4,7 +4,7 @@ menuconfig TIDSPBRIDGE tristate "DSP Bridge driver" - depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM + depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM && BROKEN select MAILBOX select OMAP2PLUS_MBOX help diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c index aab0012bba92..ab8b2ba6eedd 100644 --- a/drivers/staging/vt6655/hostap.c +++ b/drivers/staging/vt6655/hostap.c @@ -143,7 +143,8 @@ static int hostap_disable_hostapd(PSDevice pDevice, int rtnl_locked) DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n", pDevice->dev->name, pDevice->apdev->name); } - free_netdev(pDevice->apdev); + if (pDevice->apdev) + free_netdev(pDevice->apdev); pDevice->apdev = NULL; pDevice->bEnable8021x = false; pDevice->bEnableHostWEP = false; diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c index 1e8b8412e67e..4aa5ef54b683 100644 --- a/drivers/staging/vt6656/baseband.c +++ b/drivers/staging/vt6656/baseband.c @@ -939,6 +939,7 @@ int BBbVT3184Init(struct vnt_private *pDevice) u8 * pbyAgc; u16 wLengthAgc; u8 abyArray[256]; + u8 data; ntStatus = CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, @@ -1104,6 +1105,16 @@ else { ControlvWriteByte(pDevice,MESSAGE_REQUEST_BBREG,0x0D,0x01); RFbRFTableDownload(pDevice); + + /* Fix for TX USB resets from vendors driver */ + CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, USB_REG4, + MESSAGE_REQUEST_MEM, sizeof(data), &data); + + data |= 0x2; + + CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, USB_REG4, + MESSAGE_REQUEST_MEM, sizeof(data), &data); + return true;//ntStatus; } diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c index ae1676d190c5..67ba48b9a8d9 100644 --- a/drivers/staging/vt6656/hostap.c +++ b/drivers/staging/vt6656/hostap.c @@ -133,7 +133,8 @@ static int hostap_disable_hostapd(struct vnt_private *pDevice, int rtnl_locked) DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n", pDevice->dev->name, pDevice->apdev->name); } - free_netdev(pDevice->apdev); + if (pDevice->apdev) + free_netdev(pDevice->apdev); pDevice->apdev = NULL; pDevice->bEnable8021x = false; pDevice->bEnableHostWEP = false; diff --git a/drivers/staging/vt6656/rndis.h b/drivers/staging/vt6656/rndis.h index 5e073062017a..5cf5e732a36f 100644 --- a/drivers/staging/vt6656/rndis.h +++ b/drivers/staging/vt6656/rndis.h @@ -66,6 +66,8 @@ #define VIAUSB20_PACKET_HEADER 0x04 +#define USB_REG4 0x604 + typedef struct _CMD_MESSAGE { u8 byData[256]; diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c index 79ce363b2ea9..3277d9838f4e 100644 --- a/drivers/staging/zram/zram_drv.c +++ b/drivers/staging/zram/zram_drv.c @@ -652,21 +652,30 @@ static ssize_t reset_store(struct device *dev, return -ENOMEM; /* Do not reset an active device! */ - if (bdev->bd_holders) - return -EBUSY; + if (bdev->bd_holders) { + ret = -EBUSY; + goto out; + } ret = kstrtou16(buf, 10, &do_reset); if (ret) - return ret; + goto out; - if (!do_reset) - return -EINVAL; + if (!do_reset) { + ret = -EINVAL; + goto out; + } /* Make sure all pending I/O is finished */ fsync_bdev(bdev); + bdput(bdev); zram_reset_device(zram, true); return len; + +out: + bdput(bdev); + return ret; } static void __zram_make_request(struct zram *zram, struct bio *bio, int rw) diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c index 1a67537dbc56..3b950e5a918f 100644 --- a/drivers/staging/zsmalloc/zsmalloc-main.c +++ b/drivers/staging/zsmalloc/zsmalloc-main.c @@ -430,7 +430,12 @@ static struct page *get_next_page(struct page *page) return next; } -/* Encode <page, obj_idx> as a single handle value */ +/* + * Encode <page, obj_idx> as a single handle value. + * On hardware platforms with physical memory starting at 0x0 the pfn + * could be 0 so we ensure that the handle will never be 0 by adjusting the + * encoded obj_idx value before encoding. + */ static void *obj_location_to_handle(struct page *page, unsigned long obj_idx) { unsigned long handle; @@ -441,17 +446,21 @@ static void *obj_location_to_handle(struct page *page, unsigned long obj_idx) } handle = page_to_pfn(page) << OBJ_INDEX_BITS; - handle |= (obj_idx & OBJ_INDEX_MASK); + handle |= ((obj_idx + 1) & OBJ_INDEX_MASK); return (void *)handle; } -/* Decode <page, obj_idx> pair from the given object handle */ +/* + * Decode <page, obj_idx> pair from the given object handle. We adjust the + * decoded obj_idx back to its original value since it was adjusted in + * obj_location_to_handle(). + */ static void obj_handle_to_location(unsigned long handle, struct page **page, unsigned long *obj_idx) { *page = pfn_to_page(handle >> OBJ_INDEX_BITS); - *obj_idx = handle & OBJ_INDEX_MASK; + *obj_idx = (handle & OBJ_INDEX_MASK) - 1; } static unsigned long obj_idx_to_offset(struct page *page, diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 2b86f8e0fb58..71630a2af42c 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1855,6 +1855,9 @@ static struct console sercons = { */ static int __init amiserial_console_init(void) { + if (!MACH_IS_AMIGA) + return -ENODEV; + register_console(&sercons); return 0; } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 7cdd1eb9406c..0f74945af624 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -768,7 +768,7 @@ static size_t __process_echoes(struct tty_struct *tty) * data at the tail to prevent a subsequent overrun */ while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { if (echo_buf(ldata, tail) == ECHO_OP_START) { - if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB) + if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB) tail += 3; else tail += 2; @@ -1998,7 +1998,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, found = 1; size = N_TTY_BUF_SIZE - tail; - n = (found + eol + size) & (N_TTY_BUF_SIZE - 1); + n = eol - tail; + if (n > 4096) + n += 4096; + n += found; c = n; if (found && read_buf(ldata, eol) == __DISABLED_CHAR) { @@ -2243,18 +2246,19 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (time) timeout = time; } - mutex_unlock(&ldata->atomic_read_lock); - remove_wait_queue(&tty->read_wait, &wait); + n_tty_set_room(tty); + up_read(&tty->termios_rwsem); + remove_wait_queue(&tty->read_wait, &wait); if (!waitqueue_active(&tty->read_wait)) ldata->minimum_to_wake = minimum; + mutex_unlock(&ldata->atomic_read_lock); + __set_current_state(TASK_RUNNING); if (b - buf) retval = b - buf; - n_tty_set_room(tty); - up_read(&tty->termios_rwsem); return retval; } diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index f3b306efaa59..23329918f229 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -41,7 +41,7 @@ config SERIAL_8250_DEPRECATED_OPTIONS accept kernel parameters in both forms like 8250_core.nr_uarts=4 and 8250.nr_uarts=4. We now renamed the module back to 8250, but if anybody noticed in 3.7 and changed their userspace we still have to - keep the 8350_core.* options around until they revert the changes + keep the 8250_core.* options around until they revert the changes they already did. If 8250 is built as a module, this adds 8250_core alias instead. diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 481b781b26e3..e9d420ff3931 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -2052,6 +2052,9 @@ static int __init pmz_console_init(void) /* Probe ports */ pmz_probe(); + if (pmz_ports_count == 0) + return -ENODEV; + /* TODO: Autoprobe console based on OF */ /* pmz_console.index = i; */ register_console(&pmz_console); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 3a1a01af9a80..c74a00ad7add 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2086,6 +2086,7 @@ retry_open: filp->f_op = &tty_fops; goto retry_open; } + clear_bit(TTY_HUPPED, &tty->flags); tty_unlock(tty); diff --git a/fs/affs/Changes b/fs/affs/Changes index a29409c1ffe0..b41c2c9792ff 100644 --- a/fs/affs/Changes +++ b/fs/affs/Changes @@ -91,7 +91,7 @@ more 2.4 fixes: [Roman Zippel] Version 3.11 ------------ -- Converted to use 2.3.x page cache [Dave Jones <[email protected]>] +- Converted to use 2.3.x page cache [Dave Jones] - Corruption in truncate() bugfix [Ken Tyler <[email protected]>] Version 3.10 diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index d9ea7ada1378..f918a998a087 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -384,6 +384,7 @@ struct smb_version_operations { int (*clone_range)(const unsigned int, struct cifsFileInfo *src_file, struct cifsFileInfo *target_file, u64 src_off, u64 len, u64 dest_off); + int (*validate_negotiate)(const unsigned int, struct cifs_tcon *); }; struct smb_version_values { diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 409b45eefe70..77492301cc2b 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -26,13 +26,15 @@ #include <linux/mount.h> #include <linux/mm.h> #include <linux/pagemap.h> -#include <linux/btrfs.h> #include "cifspdu.h" #include "cifsglob.h" #include "cifsproto.h" #include "cifs_debug.h" #include "cifsfs.h" +#define CIFS_IOCTL_MAGIC 0xCF +#define CIFS_IOC_COPYCHUNK_FILE _IOW(CIFS_IOCTL_MAGIC, 3, int) + static long cifs_ioctl_clone(unsigned int xid, struct file *dst_file, unsigned long srcfd, u64 off, u64 len, u64 destoff) { @@ -213,7 +215,7 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) cifs_dbg(FYI, "set compress flag rc %d\n", rc); } break; - case BTRFS_IOC_CLONE: + case CIFS_IOC_COPYCHUNK_FILE: rc = cifs_ioctl_clone(xid, filep, arg, 0, 0, 0); break; default: diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 11dde4b24f8a..757da3e54d3d 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -532,7 +532,10 @@ smb2_clone_range(const unsigned int xid, int rc; unsigned int ret_data_len; struct copychunk_ioctl *pcchunk; - char *retbuf = NULL; + struct copychunk_ioctl_rsp *retbuf = NULL; + struct cifs_tcon *tcon; + int chunks_copied = 0; + bool chunk_sizes_updated = false; pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL); @@ -547,27 +550,96 @@ smb2_clone_range(const unsigned int xid, /* Note: request_res_key sets res_key null only if rc !=0 */ if (rc) - return rc; + goto cchunk_out; /* For now array only one chunk long, will make more flexible later */ pcchunk->ChunkCount = __constant_cpu_to_le32(1); pcchunk->Reserved = 0; - pcchunk->SourceOffset = cpu_to_le64(src_off); - pcchunk->TargetOffset = cpu_to_le64(dest_off); - pcchunk->Length = cpu_to_le32(len); pcchunk->Reserved2 = 0; - /* Request that server copy to target from src file identified by key */ - rc = SMB2_ioctl(xid, tlink_tcon(trgtfile->tlink), - trgtfile->fid.persistent_fid, - trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE, - true /* is_fsctl */, (char *)pcchunk, - sizeof(struct copychunk_ioctl), &retbuf, &ret_data_len); + tcon = tlink_tcon(trgtfile->tlink); - /* BB need to special case rc = EINVAL to alter chunk size */ + while (len > 0) { + pcchunk->SourceOffset = cpu_to_le64(src_off); + pcchunk->TargetOffset = cpu_to_le64(dest_off); + pcchunk->Length = + cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk)); - cifs_dbg(FYI, "rc %d data length out %d\n", rc, ret_data_len); + /* Request server copy to target from src identified by key */ + rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid, + trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE, + true /* is_fsctl */, (char *)pcchunk, + sizeof(struct copychunk_ioctl), (char **)&retbuf, + &ret_data_len); + if (rc == 0) { + if (ret_data_len != + sizeof(struct copychunk_ioctl_rsp)) { + cifs_dbg(VFS, "invalid cchunk response size\n"); + rc = -EIO; + goto cchunk_out; + } + if (retbuf->TotalBytesWritten == 0) { + cifs_dbg(FYI, "no bytes copied\n"); + rc = -EIO; + goto cchunk_out; + } + /* + * Check if server claimed to write more than we asked + */ + if (le32_to_cpu(retbuf->TotalBytesWritten) > + le32_to_cpu(pcchunk->Length)) { + cifs_dbg(VFS, "invalid copy chunk response\n"); + rc = -EIO; + goto cchunk_out; + } + if (le32_to_cpu(retbuf->ChunksWritten) != 1) { + cifs_dbg(VFS, "invalid num chunks written\n"); + rc = -EIO; + goto cchunk_out; + } + chunks_copied++; + + src_off += le32_to_cpu(retbuf->TotalBytesWritten); + dest_off += le32_to_cpu(retbuf->TotalBytesWritten); + len -= le32_to_cpu(retbuf->TotalBytesWritten); + + cifs_dbg(FYI, "Chunks %d PartialChunk %d Total %d\n", + le32_to_cpu(retbuf->ChunksWritten), + le32_to_cpu(retbuf->ChunkBytesWritten), + le32_to_cpu(retbuf->TotalBytesWritten)); + } else if (rc == -EINVAL) { + if (ret_data_len != sizeof(struct copychunk_ioctl_rsp)) + goto cchunk_out; + + cifs_dbg(FYI, "MaxChunks %d BytesChunk %d MaxCopy %d\n", + le32_to_cpu(retbuf->ChunksWritten), + le32_to_cpu(retbuf->ChunkBytesWritten), + le32_to_cpu(retbuf->TotalBytesWritten)); + + /* + * Check if this is the first request using these sizes, + * (ie check if copy succeed once with original sizes + * and check if the server gave us different sizes after + * we already updated max sizes on previous request). + * if not then why is the server returning an error now + */ + if ((chunks_copied != 0) || chunk_sizes_updated) + goto cchunk_out; + + /* Check that server is not asking us to grow size */ + if (le32_to_cpu(retbuf->ChunkBytesWritten) < + tcon->max_bytes_chunk) + tcon->max_bytes_chunk = + le32_to_cpu(retbuf->ChunkBytesWritten); + else + goto cchunk_out; /* server gave us bogus size */ + + /* No need to change MaxChunks since already set to 1 */ + chunk_sizes_updated = true; + } + } +cchunk_out: kfree(pcchunk); return rc; } @@ -1247,6 +1319,7 @@ struct smb_version_operations smb30_operations = { .create_lease_buf = smb3_create_lease_buf, .parse_lease_buf = smb3_parse_lease_buf, .clone_range = smb2_clone_range, + .validate_negotiate = smb3_validate_negotiate, }; struct smb_version_values smb20_values = { diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index d65270c290a1..2013234b73ad 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -454,6 +454,81 @@ neg_exit: return rc; } +int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon) +{ + int rc = 0; + struct validate_negotiate_info_req vneg_inbuf; + struct validate_negotiate_info_rsp *pneg_rsp; + u32 rsplen; + + cifs_dbg(FYI, "validate negotiate\n"); + + /* + * validation ioctl must be signed, so no point sending this if we + * can not sign it. We could eventually change this to selectively + * sign just this, the first and only signed request on a connection. + * This is good enough for now since a user who wants better security + * would also enable signing on the mount. Having validation of + * negotiate info for signed connections helps reduce attack vectors + */ + if (tcon->ses->server->sign == false) + return 0; /* validation requires signing */ + + vneg_inbuf.Capabilities = + cpu_to_le32(tcon->ses->server->vals->req_capabilities); + memcpy(vneg_inbuf.Guid, cifs_client_guid, SMB2_CLIENT_GUID_SIZE); + + if (tcon->ses->sign) + vneg_inbuf.SecurityMode = + cpu_to_le16(SMB2_NEGOTIATE_SIGNING_REQUIRED); + else if (global_secflags & CIFSSEC_MAY_SIGN) + vneg_inbuf.SecurityMode = + cpu_to_le16(SMB2_NEGOTIATE_SIGNING_ENABLED); + else + vneg_inbuf.SecurityMode = 0; + + vneg_inbuf.DialectCount = cpu_to_le16(1); + vneg_inbuf.Dialects[0] = + cpu_to_le16(tcon->ses->server->vals->protocol_id); + + rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID, + FSCTL_VALIDATE_NEGOTIATE_INFO, true /* is_fsctl */, + (char *)&vneg_inbuf, sizeof(struct validate_negotiate_info_req), + (char **)&pneg_rsp, &rsplen); + + if (rc != 0) { + cifs_dbg(VFS, "validate protocol negotiate failed: %d\n", rc); + return -EIO; + } + + if (rsplen != sizeof(struct validate_negotiate_info_rsp)) { + cifs_dbg(VFS, "invalid size of protocol negotiate response\n"); + return -EIO; + } + + /* check validate negotiate info response matches what we got earlier */ + if (pneg_rsp->Dialect != + cpu_to_le16(tcon->ses->server->vals->protocol_id)) + goto vneg_out; + + if (pneg_rsp->SecurityMode != cpu_to_le16(tcon->ses->server->sec_mode)) + goto vneg_out; + + /* do not validate server guid because not saved at negprot time yet */ + + if ((le32_to_cpu(pneg_rsp->Capabilities) | SMB2_NT_FIND | + SMB2_LARGE_FILES) != tcon->ses->server->capabilities) + goto vneg_out; + + /* validate negotiate successful */ + cifs_dbg(FYI, "validate negotiate info successful\n"); + return 0; + +vneg_out: + cifs_dbg(VFS, "protocol revalidation - security settings mismatch\n"); + return -EIO; +} + int SMB2_sess_setup(const unsigned int xid, struct cifs_ses *ses, const struct nls_table *nls_cp) @@ -829,6 +904,8 @@ SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree, ((tcon->share_flags & SHI1005_FLAGS_DFS) == 0)) cifs_dbg(VFS, "DFS capability contradicts DFS flag\n"); init_copy_chunk_defaults(tcon); + if (tcon->ses->server->ops->validate_negotiate) + rc = tcon->ses->server->ops->validate_negotiate(xid, tcon); tcon_exit: free_rsp_buf(resp_buftype, rsp); kfree(unc_path); @@ -1214,10 +1291,17 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0); rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base; - if (rc != 0) { + if ((rc != 0) && (rc != -EINVAL)) { if (tcon) cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE); goto ioctl_exit; + } else if (rc == -EINVAL) { + if ((opcode != FSCTL_SRV_COPYCHUNK_WRITE) && + (opcode != FSCTL_SRV_COPYCHUNK)) { + if (tcon) + cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE); + goto ioctl_exit; + } } /* check if caller wants to look at return data or just return rc */ @@ -2154,11 +2238,9 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon, rc = SendReceive2(xid, ses, iov, num, &resp_buftype, 0); rsp = (struct smb2_set_info_rsp *)iov[0].iov_base; - if (rc != 0) { + if (rc != 0) cifs_stats_fail_inc(tcon, SMB2_SET_INFO_HE); - goto out; - } -out: + free_rsp_buf(resp_buftype, rsp); kfree(iov); return rc; diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index f88320bbb477..2022c542ea3a 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -577,13 +577,19 @@ struct copychunk_ioctl_rsp { __le32 TotalBytesWritten; } __packed; -/* Response and Request are the same format */ -struct validate_negotiate_info { +struct validate_negotiate_info_req { __le32 Capabilities; __u8 Guid[SMB2_CLIENT_GUID_SIZE]; __le16 SecurityMode; __le16 DialectCount; - __le16 Dialect[1]; + __le16 Dialects[1]; /* dialect (someday maybe list) client asked for */ +} __packed; + +struct validate_negotiate_info_rsp { + __le32 Capabilities; + __u8 Guid[SMB2_CLIENT_GUID_SIZE]; + __le16 SecurityMode; + __le16 Dialect; /* Dialect in use for the connection */ } __packed; #define RSS_CAPABLE 0x00000001 diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index b4eea105b08c..93adc64666f3 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -162,5 +162,6 @@ extern int smb2_lockv(const unsigned int xid, struct cifs_tcon *tcon, struct smb2_lock_element *buf); extern int SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon, __u8 *lease_key, const __le32 lease_state); +extern int smb3_validate_negotiate(const unsigned int, struct cifs_tcon *); #endif /* _SMB2PROTO_H */ diff --git a/fs/cifs/smbfsctl.h b/fs/cifs/smbfsctl.h index a4b2391fe66e..0e538b5c9622 100644 --- a/fs/cifs/smbfsctl.h +++ b/fs/cifs/smbfsctl.h @@ -90,7 +90,7 @@ #define FSCTL_LMR_REQUEST_RESILIENCY 0x001401D4 /* BB add struct */ #define FSCTL_LMR_GET_LINK_TRACK_INF 0x001400E8 /* BB add struct */ #define FSCTL_LMR_SET_LINK_TRACK_INF 0x001400EC /* BB add struct */ -#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204 /* BB add struct */ +#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204 /* Perform server-side data movement */ #define FSCTL_SRV_COPYCHUNK 0x001440F2 #define FSCTL_SRV_COPYCHUNK_WRITE 0x001480F2 diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 79b5da2acbe1..b94f93685093 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -609,7 +609,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; struct sysfs_open_file *of; - bool has_read, has_write; + bool has_read, has_write, has_mmap; int error = -EACCES; /* need attr_sd for attr and ops, its parent for kobj */ @@ -621,6 +621,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) has_read = battr->read || battr->mmap; has_write = battr->write || battr->mmap; + has_mmap = battr->mmap; } else { const struct sysfs_ops *ops = sysfs_file_ops(attr_sd); @@ -632,6 +633,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) has_read = ops->show; has_write = ops->store; + has_mmap = false; } /* check perms and supported operations */ @@ -649,7 +651,23 @@ static int sysfs_open_file(struct inode *inode, struct file *file) if (!of) goto err_out; - mutex_init(&of->mutex); + /* + * The following is done to give a different lockdep key to + * @of->mutex for files which implement mmap. This is a rather + * crude way to avoid false positive lockdep warning around + * mm->mmap_sem - mmap nests @of->mutex under mm->mmap_sem and + * reading /sys/block/sda/trace/act_mask grabs sr_mutex, under + * which mm->mmap_sem nests, while holding @of->mutex. As each + * open file has a separate mutex, it's okay as long as those don't + * happen on the same file. At this point, we can't easily give + * each file a separate locking class. Let's differentiate on + * whether the file has mmap or not for now. + */ + if (has_mmap) + mutex_init(&of->mutex); + else + mutex_init(&of->mutex); + of->sd = attr_sd; of->file = file; diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index d98c67001840..3ea214cff349 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -83,7 +83,9 @@ * Should the subsystem abort the loading of an ACPI table if the * table checksum is incorrect? */ +#ifndef ACPI_CHECKSUM_ABORT #define ACPI_CHECKSUM_ABORT FALSE +#endif /* * Generate a version of ACPICA that only supports "reduced hardware" diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 7b2de026a4f3..c602c7718421 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -100,6 +100,7 @@ enum acpi_hotplug_mode { struct acpi_hotplug_profile { struct kobject kobj; bool enabled:1; + bool ignore:1; enum acpi_hotplug_mode mode; }; diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index d8f9457755b4..4278aba96503 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -46,7 +46,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20130927 +#define ACPI_CA_VERSION 0x20131115 #include <acpi/acconfig.h> #include <acpi/actypes.h> diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 656a27efb2c8..82eac610ce1a 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -125,6 +125,13 @@ extern struct gpio_chip *gpiochip_find(void *data, int gpiod_lock_as_irq(struct gpio_desc *desc); void gpiod_unlock_as_irq(struct gpio_desc *desc); +enum gpio_lookup_flags { + GPIO_ACTIVE_HIGH = (0 << 0), + GPIO_ACTIVE_LOW = (1 << 0), + GPIO_OPEN_DRAIN = (1 << 1), + GPIO_OPEN_SOURCE = (1 << 2), +}; + /** * Lookup table for associating GPIOs to specific devices and functions using * platform data. @@ -152,9 +159,9 @@ struct gpiod_lookup { */ unsigned int idx; /* - * mask of GPIOF_* values + * mask of GPIO_* values */ - unsigned long flags; + enum gpio_lookup_flags flags; }; /* diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index a265af294ea4..206a2af6b62b 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -21,6 +21,8 @@ #include <linux/hid.h> #include <linux/hid-sensor-ids.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> /** * struct hid_sensor_hub_attribute_info - Attribute info @@ -184,6 +186,7 @@ struct hid_sensor_common { struct platform_device *pdev; unsigned usage_id; bool data_ready; + struct iio_trigger *trigger; struct hid_sensor_hub_attribute_info poll; struct hid_sensor_hub_attribute_info report_state; struct hid_sensor_hub_attribute_info power_state; diff --git a/kernel/extable.c b/kernel/extable.c index 832cb28105bb..763faf037ec1 100644 --- a/kernel/extable.c +++ b/kernel/extable.c @@ -61,7 +61,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr) static inline int init_kernel_text(unsigned long addr) { if (addr >= (unsigned long)_sinittext && - addr <= (unsigned long)_einittext) + addr < (unsigned long)_einittext) return 1; return 0; } @@ -69,7 +69,7 @@ static inline int init_kernel_text(unsigned long addr) int core_kernel_text(unsigned long addr) { if (addr >= (unsigned long)_stext && - addr <= (unsigned long)_etext) + addr < (unsigned long)_etext) return 1; if (system_state == SYSTEM_BOOTING && diff --git a/lib/lockref.c b/lib/lockref.c index d2b123f8456b..f07a40d33871 100644 --- a/lib/lockref.c +++ b/lib/lockref.c @@ -1,5 +1,6 @@ #include <linux/export.h> #include <linux/lockref.h> +#include <linux/mutex.h> #if USE_CMPXCHG_LOCKREF @@ -12,14 +13,6 @@ #endif /* - * Allow architectures to override the default cpu_relax() within CMPXCHG_LOOP. - * This is useful for architectures with an expensive cpu_relax(). - */ -#ifndef arch_mutex_cpu_relax -# define arch_mutex_cpu_relax() cpu_relax() -#endif - -/* * Note that the "cmpxchg()" reloads the "old" value for the * failure case. */ diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1 index 4178effd9e99..7b3646adb92f 100644 --- a/tools/power/cpupower/man/cpupower-idle-info.1 +++ b/tools/power/cpupower/man/cpupower-idle-info.1 @@ -87,4 +87,5 @@ Thomas Renninger <[email protected]> .fi .SH "SEE ALSO" .LP -cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1) +cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1), +cpupower\-idle\-set(1) diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1 new file mode 100644 index 000000000000..6b1607272a5b --- /dev/null +++ b/tools/power/cpupower/man/cpupower-idle-set.1 @@ -0,0 +1,71 @@ +.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual" +.SH "NAME" +.LP +cpupower idle\-set \- Utility to set cpu idle state specific kernel options +.SH "SYNTAX" +.LP +cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +The cpupower idle\-set subcommand allows to set cpu idle, also called cpu +sleep state, specific options offered by the kernel. One example is disabling +sleep states. This can be handy for power vs performance tuning. +.SH "OPTIONS" +.LP +.TP +\fB\-d\fR \fB\-\-disable\fR +Disable a specific processor sleep state. +.TP +\fB\-e\fR \fB\-\-enable\fR +Enable a specific processor sleep state. + +.SH "REMARKS" +.LP +Cpuidle Governors Policy on Disabling Sleep States + +.RS 4 +Depending on the used cpuidle governor, implementing the kernel policy +how to choose sleep states, subsequent sleep states on this core, might get +disabled as well. + +There are two cpuidle governors ladder and menu. While the ladder +governor is always available, if CONFIG_CPU_IDLE is selected, the +menu governor additionally requires CONFIG_NO_HZ. + +The behavior and the effect of the disable variable depends on the +implementation of a particular governor. In the ladder governor, for +example, it is not coherent, i.e. if one is disabling a light state, +then all deeper states are disabled as well. Likewise, if one enables a +deep state but a lighter state still is disabled, then this has no effect. +.RE +.LP +Disabling the Lightest Sleep State may not have any Affect + +.RS 4 +If criteria are not met to enter deeper sleep states and the lightest sleep +state is chosen when idle, the kernel may still enter this sleep state, +irrespective of whether it is disabled or not. This is also reflected in +the usage count of the disabled sleep state when using the cpupower idle-info +command. +.RE +.LP +Selecting specific CPU Cores + +.RS 4 +By default processor sleep states of all CPU cores are set. Please refer +to the cpupower(1) manpage in the \-\-cpu option section how to disable +C-states of specific cores. +.RE +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP +\fI/sys/devices/system/cpu/cpuidle/*\fP +.fi +.SH "AUTHORS" +.nf +Thomas Renninger <[email protected]> +.fi +.SH "SEE ALSO" +.LP +cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1), +cpupower\-idle\-info(1) diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c index 5cdc600e8152..851c7a16ca49 100644 --- a/tools/power/cpupower/utils/helpers/sysfs.c +++ b/tools/power/cpupower/utils/helpers/sysfs.c @@ -278,7 +278,7 @@ static char *sysfs_idlestate_get_one_string(unsigned int cpu, int sysfs_is_idlestate_disabled(unsigned int cpu, unsigned int idlestate) { - if (sysfs_get_idlestate_count(cpu) < idlestate) + if (sysfs_get_idlestate_count(cpu) <= idlestate) return -1; if (!sysfs_idlestate_file_exists(cpu, idlestate, @@ -303,7 +303,7 @@ int sysfs_idlestate_disable(unsigned int cpu, char value[SYSFS_PATH_MAX]; int bytes_written; - if (sysfs_get_idlestate_count(cpu) < idlestate) + if (sysfs_get_idlestate_count(cpu) <= idlestate) return -1; if (!sysfs_idlestate_file_exists(cpu, idlestate, |