diff options
211 files changed, 9063 insertions, 6367 deletions
diff --git a/Documentation/devicetree/bindings/arm/vic.txt b/Documentation/devicetree/bindings/arm/vic.txt index 266716b23437..dd527216c5fb 100644 --- a/Documentation/devicetree/bindings/arm/vic.txt +++ b/Documentation/devicetree/bindings/arm/vic.txt @@ -18,6 +18,15 @@ Required properties: Optional properties: - interrupts : Interrupt source for parent controllers if the VIC is nested. +- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit + represents single interrupt source, starting from source 0 at LSb and ending + at source 31 at MSb. A bit that is set means that the source is wired and + clear means otherwise. If unspecified, defaults to all valid. +- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be + configured as wake up source for the system. Order of bits is the same as for + valid-mask property. A set bit means that this interrupt source can be + configured as a wake up source for the system. If unspecied, defaults to all + interrupt sources configurable as wake up sources. Example: @@ -26,4 +35,7 @@ Example: interrupt-controller; #interrupt-cells = <1>; reg = <0x60000 0x1000>; + + valid-mask = <0xffffff7f>; + valid-wakeup-mask = <0x0000ff7f>; }; diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt new file mode 100644 index 000000000000..c62391fc0e39 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt @@ -0,0 +1,19 @@ +* Core Divider Clock bindings for Marvell MVEBU SoCs + +The following is a list of provided IDs and clock names on Armada 370/XP: + 0 = nand (NAND clock) + +Required properties: +- compatible : must be "marvell,armada-370-corediv-clock" +- reg : must be the register address of Core Divider control register +- #clock-cells : from common clock binding; shall be set to 1 +- clocks : must be set to the parent's phandle + +Example: + +corediv_clk: corediv-clocks@18740 { + compatible = "marvell,armada-370-corediv-clock"; + reg = <0x18740 0xc>; + #clock-cells = <1>; + clocks = <&pll>; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt index 3077370c89af..1e70a8aff260 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt @@ -59,16 +59,16 @@ Required subnode-properties: Optional subnode-properties: - fsl,drive-strength: Integer. - 0: 4 mA - 1: 8 mA - 2: 12 mA - 3: 16 mA + 0: MXS_DRIVE_4mA + 1: MXS_DRIVE_8mA + 2: MXS_DRIVE_12mA + 3: MXS_DRIVE_16mA - fsl,voltage: Integer. - 0: 1.8 V - 1: 3.3 V + 0: MXS_VOLTAGE_LOW - 1.8 V + 1: MXS_VOLTAGE_HIGH - 3.3 V - fsl,pull-up: Integer. - 0: Disable the internal pull-up - 1: Enable the internal pull-up + 0: MXS_PULL_DISABLE - Disable the internal pull-up + 1: MXS_PULL_ENABLE - Enable the internal pull-up Note that when enabling the pull-up, the internal pad keeper gets disabled. Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up @@ -85,23 +85,32 @@ pinctrl@80018000 { mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2000 0x2010 0x2020 0x2030 - 0x2040 0x2050 0x2060 0x2070 - 0x2080 0x2090 0x20a0>; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + MX28_PAD_SSP0_DATA0__SSP0_D0 + MX28_PAD_SSP0_DATA1__SSP0_D1 + MX28_PAD_SSP0_DATA2__SSP0_D2 + MX28_PAD_SSP0_DATA3__SSP0_D3 + MX28_PAD_SSP0_DATA4__SSP0_D4 + MX28_PAD_SSP0_DATA5__SSP0_D5 + MX28_PAD_SSP0_DATA6__SSP0_D6 + MX28_PAD_SSP0_DATA7__SSP0_D7 + MX28_PAD_SSP0_CMD__SSP0_CMD + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT + MX28_PAD_SSP0_SCK__SSP0_SCK + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc_cd_cfg: mmc-cd-cfg { - fsl,pinmux-ids = <0x2090>; - fsl,pull-up = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc_sck_cfg: mmc-sck-cfg { - fsl,pinmux-ids = <0x20a0>; - fsl,drive-strength = <2>; - fsl,pull-up = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_SCK__SSP0_SCK>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; @@ -112,811 +121,7 @@ adjusting the configuration for pins card-detection and clock from what group node mmc0-8bit defines. Only the configuration properties to be adjusted need to be listed in the config nodes. -Valid values for i.MX28 pinmux-id: - -pinmux id ------- -- -MX28_PAD_GPMI_D00__GPMI_D0 0x0000 -MX28_PAD_GPMI_D01__GPMI_D1 0x0010 -MX28_PAD_GPMI_D02__GPMI_D2 0x0020 -MX28_PAD_GPMI_D03__GPMI_D3 0x0030 -MX28_PAD_GPMI_D04__GPMI_D4 0x0040 -MX28_PAD_GPMI_D05__GPMI_D5 0x0050 -MX28_PAD_GPMI_D06__GPMI_D6 0x0060 -MX28_PAD_GPMI_D07__GPMI_D7 0x0070 -MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100 -MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110 -MX28_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 -MX28_PAD_GPMI_CE3N__GPMI_CE3N 0x0130 -MX28_PAD_GPMI_RDY0__GPMI_READY0 0x0140 -MX28_PAD_GPMI_RDY1__GPMI_READY1 0x0150 -MX28_PAD_GPMI_RDY2__GPMI_READY2 0x0160 -MX28_PAD_GPMI_RDY3__GPMI_READY3 0x0170 -MX28_PAD_GPMI_RDN__GPMI_RDN 0x0180 -MX28_PAD_GPMI_WRN__GPMI_WRN 0x0190 -MX28_PAD_GPMI_ALE__GPMI_ALE 0x01a0 -MX28_PAD_GPMI_CLE__GPMI_CLE 0x01b0 -MX28_PAD_GPMI_RESETN__GPMI_RESETN 0x01c0 -MX28_PAD_LCD_D00__LCD_D0 0x1000 -MX28_PAD_LCD_D01__LCD_D1 0x1010 -MX28_PAD_LCD_D02__LCD_D2 0x1020 -MX28_PAD_LCD_D03__LCD_D3 0x1030 -MX28_PAD_LCD_D04__LCD_D4 0x1040 -MX28_PAD_LCD_D05__LCD_D5 0x1050 -MX28_PAD_LCD_D06__LCD_D6 0x1060 -MX28_PAD_LCD_D07__LCD_D7 0x1070 -MX28_PAD_LCD_D08__LCD_D8 0x1080 -MX28_PAD_LCD_D09__LCD_D9 0x1090 -MX28_PAD_LCD_D10__LCD_D10 0x10a0 -MX28_PAD_LCD_D11__LCD_D11 0x10b0 -MX28_PAD_LCD_D12__LCD_D12 0x10c0 -MX28_PAD_LCD_D13__LCD_D13 0x10d0 -MX28_PAD_LCD_D14__LCD_D14 0x10e0 -MX28_PAD_LCD_D15__LCD_D15 0x10f0 -MX28_PAD_LCD_D16__LCD_D16 0x1100 -MX28_PAD_LCD_D17__LCD_D17 0x1110 -MX28_PAD_LCD_D18__LCD_D18 0x1120 -MX28_PAD_LCD_D19__LCD_D19 0x1130 -MX28_PAD_LCD_D20__LCD_D20 0x1140 -MX28_PAD_LCD_D21__LCD_D21 0x1150 -MX28_PAD_LCD_D22__LCD_D22 0x1160 -MX28_PAD_LCD_D23__LCD_D23 0x1170 -MX28_PAD_LCD_RD_E__LCD_RD_E 0x1180 -MX28_PAD_LCD_WR_RWN__LCD_WR_RWN 0x1190 -MX28_PAD_LCD_RS__LCD_RS 0x11a0 -MX28_PAD_LCD_CS__LCD_CS 0x11b0 -MX28_PAD_LCD_VSYNC__LCD_VSYNC 0x11c0 -MX28_PAD_LCD_HSYNC__LCD_HSYNC 0x11d0 -MX28_PAD_LCD_DOTCLK__LCD_DOTCLK 0x11e0 -MX28_PAD_LCD_ENABLE__LCD_ENABLE 0x11f0 -MX28_PAD_SSP0_DATA0__SSP0_D0 0x2000 -MX28_PAD_SSP0_DATA1__SSP0_D1 0x2010 -MX28_PAD_SSP0_DATA2__SSP0_D2 0x2020 -MX28_PAD_SSP0_DATA3__SSP0_D3 0x2030 -MX28_PAD_SSP0_DATA4__SSP0_D4 0x2040 -MX28_PAD_SSP0_DATA5__SSP0_D5 0x2050 -MX28_PAD_SSP0_DATA6__SSP0_D6 0x2060 -MX28_PAD_SSP0_DATA7__SSP0_D7 0x2070 -MX28_PAD_SSP0_CMD__SSP0_CMD 0x2080 -MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 0x2090 -MX28_PAD_SSP0_SCK__SSP0_SCK 0x20a0 -MX28_PAD_SSP1_SCK__SSP1_SCK 0x20c0 -MX28_PAD_SSP1_CMD__SSP1_CMD 0x20d0 -MX28_PAD_SSP1_DATA0__SSP1_D0 0x20e0 -MX28_PAD_SSP1_DATA3__SSP1_D3 0x20f0 -MX28_PAD_SSP2_SCK__SSP2_SCK 0x2100 -MX28_PAD_SSP2_MOSI__SSP2_CMD 0x2110 -MX28_PAD_SSP2_MISO__SSP2_D0 0x2120 -MX28_PAD_SSP2_SS0__SSP2_D3 0x2130 -MX28_PAD_SSP2_SS1__SSP2_D4 0x2140 -MX28_PAD_SSP2_SS2__SSP2_D5 0x2150 -MX28_PAD_SSP3_SCK__SSP3_SCK 0x2180 -MX28_PAD_SSP3_MOSI__SSP3_CMD 0x2190 -MX28_PAD_SSP3_MISO__SSP3_D0 0x21a0 -MX28_PAD_SSP3_SS0__SSP3_D3 0x21b0 -MX28_PAD_AUART0_RX__AUART0_RX 0x3000 -MX28_PAD_AUART0_TX__AUART0_TX 0x3010 -MX28_PAD_AUART0_CTS__AUART0_CTS 0x3020 -MX28_PAD_AUART0_RTS__AUART0_RTS 0x3030 -MX28_PAD_AUART1_RX__AUART1_RX 0x3040 -MX28_PAD_AUART1_TX__AUART1_TX 0x3050 -MX28_PAD_AUART1_CTS__AUART1_CTS 0x3060 -MX28_PAD_AUART1_RTS__AUART1_RTS 0x3070 -MX28_PAD_AUART2_RX__AUART2_RX 0x3080 -MX28_PAD_AUART2_TX__AUART2_TX 0x3090 -MX28_PAD_AUART2_CTS__AUART2_CTS 0x30a0 -MX28_PAD_AUART2_RTS__AUART2_RTS 0x30b0 -MX28_PAD_AUART3_RX__AUART3_RX 0x30c0 -MX28_PAD_AUART3_TX__AUART3_TX 0x30d0 -MX28_PAD_AUART3_CTS__AUART3_CTS 0x30e0 -MX28_PAD_AUART3_RTS__AUART3_RTS 0x30f0 -MX28_PAD_PWM0__PWM_0 0x3100 -MX28_PAD_PWM1__PWM_1 0x3110 -MX28_PAD_PWM2__PWM_2 0x3120 -MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 0x3140 -MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 0x3150 -MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 0x3160 -MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 0x3170 -MX28_PAD_I2C0_SCL__I2C0_SCL 0x3180 -MX28_PAD_I2C0_SDA__I2C0_SDA 0x3190 -MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 0x31a0 -MX28_PAD_SPDIF__SPDIF_TX 0x31b0 -MX28_PAD_PWM3__PWM_3 0x31c0 -MX28_PAD_PWM4__PWM_4 0x31d0 -MX28_PAD_LCD_RESET__LCD_RESET 0x31e0 -MX28_PAD_ENET0_MDC__ENET0_MDC 0x4000 -MX28_PAD_ENET0_MDIO__ENET0_MDIO 0x4010 -MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 0x4020 -MX28_PAD_ENET0_RXD0__ENET0_RXD0 0x4030 -MX28_PAD_ENET0_RXD1__ENET0_RXD1 0x4040 -MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 0x4050 -MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 0x4060 -MX28_PAD_ENET0_TXD0__ENET0_TXD0 0x4070 -MX28_PAD_ENET0_TXD1__ENET0_TXD1 0x4080 -MX28_PAD_ENET0_RXD2__ENET0_RXD2 0x4090 -MX28_PAD_ENET0_RXD3__ENET0_RXD3 0x40a0 -MX28_PAD_ENET0_TXD2__ENET0_TXD2 0x40b0 -MX28_PAD_ENET0_TXD3__ENET0_TXD3 0x40c0 -MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 0x40d0 -MX28_PAD_ENET0_COL__ENET0_COL 0x40e0 -MX28_PAD_ENET0_CRS__ENET0_CRS 0x40f0 -MX28_PAD_ENET_CLK__CLKCTRL_ENET 0x4100 -MX28_PAD_JTAG_RTCK__JTAG_RTCK 0x4140 -MX28_PAD_EMI_D00__EMI_DATA0 0x5000 -MX28_PAD_EMI_D01__EMI_DATA1 0x5010 -MX28_PAD_EMI_D02__EMI_DATA2 0x5020 -MX28_PAD_EMI_D03__EMI_DATA3 0x5030 -MX28_PAD_EMI_D04__EMI_DATA4 0x5040 -MX28_PAD_EMI_D05__EMI_DATA5 0x5050 -MX28_PAD_EMI_D06__EMI_DATA6 0x5060 -MX28_PAD_EMI_D07__EMI_DATA7 0x5070 -MX28_PAD_EMI_D08__EMI_DATA8 0x5080 -MX28_PAD_EMI_D09__EMI_DATA9 0x5090 -MX28_PAD_EMI_D10__EMI_DATA10 0x50a0 -MX28_PAD_EMI_D11__EMI_DATA11 0x50b0 -MX28_PAD_EMI_D12__EMI_DATA12 0x50c0 -MX28_PAD_EMI_D13__EMI_DATA13 0x50d0 -MX28_PAD_EMI_D14__EMI_DATA14 0x50e0 -MX28_PAD_EMI_D15__EMI_DATA15 0x50f0 -MX28_PAD_EMI_ODT0__EMI_ODT0 0x5100 -MX28_PAD_EMI_DQM0__EMI_DQM0 0x5110 -MX28_PAD_EMI_ODT1__EMI_ODT1 0x5120 -MX28_PAD_EMI_DQM1__EMI_DQM1 0x5130 -MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK 0x5140 -MX28_PAD_EMI_CLK__EMI_CLK 0x5150 -MX28_PAD_EMI_DQS0__EMI_DQS0 0x5160 -MX28_PAD_EMI_DQS1__EMI_DQS1 0x5170 -MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN 0x51a0 -MX28_PAD_EMI_A00__EMI_ADDR0 0x6000 -MX28_PAD_EMI_A01__EMI_ADDR1 0x6010 -MX28_PAD_EMI_A02__EMI_ADDR2 0x6020 -MX28_PAD_EMI_A03__EMI_ADDR3 0x6030 -MX28_PAD_EMI_A04__EMI_ADDR4 0x6040 -MX28_PAD_EMI_A05__EMI_ADDR5 0x6050 -MX28_PAD_EMI_A06__EMI_ADDR6 0x6060 -MX28_PAD_EMI_A07__EMI_ADDR7 0x6070 -MX28_PAD_EMI_A08__EMI_ADDR8 0x6080 -MX28_PAD_EMI_A09__EMI_ADDR9 0x6090 -MX28_PAD_EMI_A10__EMI_ADDR10 0x60a0 -MX28_PAD_EMI_A11__EMI_ADDR11 0x60b0 -MX28_PAD_EMI_A12__EMI_ADDR12 0x60c0 -MX28_PAD_EMI_A13__EMI_ADDR13 0x60d0 -MX28_PAD_EMI_A14__EMI_ADDR14 0x60e0 -MX28_PAD_EMI_BA0__EMI_BA0 0x6100 -MX28_PAD_EMI_BA1__EMI_BA1 0x6110 -MX28_PAD_EMI_BA2__EMI_BA2 0x6120 -MX28_PAD_EMI_CASN__EMI_CASN 0x6130 -MX28_PAD_EMI_RASN__EMI_RASN 0x6140 -MX28_PAD_EMI_WEN__EMI_WEN 0x6150 -MX28_PAD_EMI_CE0N__EMI_CE0N 0x6160 -MX28_PAD_EMI_CE1N__EMI_CE1N 0x6170 -MX28_PAD_EMI_CKE__EMI_CKE 0x6180 -MX28_PAD_GPMI_D00__SSP1_D0 0x0001 -MX28_PAD_GPMI_D01__SSP1_D1 0x0011 -MX28_PAD_GPMI_D02__SSP1_D2 0x0021 -MX28_PAD_GPMI_D03__SSP1_D3 0x0031 -MX28_PAD_GPMI_D04__SSP1_D4 0x0041 -MX28_PAD_GPMI_D05__SSP1_D5 0x0051 -MX28_PAD_GPMI_D06__SSP1_D6 0x0061 -MX28_PAD_GPMI_D07__SSP1_D7 0x0071 -MX28_PAD_GPMI_CE0N__SSP3_D0 0x0101 -MX28_PAD_GPMI_CE1N__SSP3_D3 0x0111 -MX28_PAD_GPMI_CE2N__CAN1_TX 0x0121 -MX28_PAD_GPMI_CE3N__CAN1_RX 0x0131 -MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 0x0141 -MX28_PAD_GPMI_RDY1__SSP1_CMD 0x0151 -MX28_PAD_GPMI_RDY2__CAN0_TX 0x0161 -MX28_PAD_GPMI_RDY3__CAN0_RX 0x0171 -MX28_PAD_GPMI_RDN__SSP3_SCK 0x0181 -MX28_PAD_GPMI_WRN__SSP1_SCK 0x0191 -MX28_PAD_GPMI_ALE__SSP3_D1 0x01a1 -MX28_PAD_GPMI_CLE__SSP3_D2 0x01b1 -MX28_PAD_GPMI_RESETN__SSP3_CMD 0x01c1 -MX28_PAD_LCD_D03__ETM_DA8 0x1031 -MX28_PAD_LCD_D04__ETM_DA9 0x1041 -MX28_PAD_LCD_D08__ETM_DA3 0x1081 -MX28_PAD_LCD_D09__ETM_DA4 0x1091 -MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT 0x1141 -MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN 0x1151 -MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT 0x1161 -MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN 0x1171 -MX28_PAD_LCD_RD_E__LCD_VSYNC 0x1181 -MX28_PAD_LCD_WR_RWN__LCD_HSYNC 0x1191 -MX28_PAD_LCD_RS__LCD_DOTCLK 0x11a1 -MX28_PAD_LCD_CS__LCD_ENABLE 0x11b1 -MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 0x11c1 -MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 0x11d1 -MX28_PAD_LCD_DOTCLK__SAIF1_MCLK 0x11e1 -MX28_PAD_SSP0_DATA4__SSP2_D0 0x2041 -MX28_PAD_SSP0_DATA5__SSP2_D3 0x2051 -MX28_PAD_SSP0_DATA6__SSP2_CMD 0x2061 -MX28_PAD_SSP0_DATA7__SSP2_SCK 0x2071 -MX28_PAD_SSP1_SCK__SSP2_D1 0x20c1 -MX28_PAD_SSP1_CMD__SSP2_D2 0x20d1 -MX28_PAD_SSP1_DATA0__SSP2_D6 0x20e1 -MX28_PAD_SSP1_DATA3__SSP2_D7 0x20f1 -MX28_PAD_SSP2_SCK__AUART2_RX 0x2101 -MX28_PAD_SSP2_MOSI__AUART2_TX 0x2111 -MX28_PAD_SSP2_MISO__AUART3_RX 0x2121 -MX28_PAD_SSP2_SS0__AUART3_TX 0x2131 -MX28_PAD_SSP2_SS1__SSP2_D1 0x2141 -MX28_PAD_SSP2_SS2__SSP2_D2 0x2151 -MX28_PAD_SSP3_SCK__AUART4_TX 0x2181 -MX28_PAD_SSP3_MOSI__AUART4_RX 0x2191 -MX28_PAD_SSP3_MISO__AUART4_RTS 0x21a1 -MX28_PAD_SSP3_SS0__AUART4_CTS 0x21b1 -MX28_PAD_AUART0_RX__I2C0_SCL 0x3001 -MX28_PAD_AUART0_TX__I2C0_SDA 0x3011 -MX28_PAD_AUART0_CTS__AUART4_RX 0x3021 -MX28_PAD_AUART0_RTS__AUART4_TX 0x3031 -MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 0x3041 -MX28_PAD_AUART1_TX__SSP3_CARD_DETECT 0x3051 -MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 0x3061 -MX28_PAD_AUART1_RTS__USB0_ID 0x3071 -MX28_PAD_AUART2_RX__SSP3_D1 0x3081 -MX28_PAD_AUART2_TX__SSP3_D2 0x3091 -MX28_PAD_AUART2_CTS__I2C1_SCL 0x30a1 -MX28_PAD_AUART2_RTS__I2C1_SDA 0x30b1 -MX28_PAD_AUART3_RX__CAN0_TX 0x30c1 -MX28_PAD_AUART3_TX__CAN0_RX 0x30d1 -MX28_PAD_AUART3_CTS__CAN1_TX 0x30e1 -MX28_PAD_AUART3_RTS__CAN1_RX 0x30f1 -MX28_PAD_PWM0__I2C1_SCL 0x3101 -MX28_PAD_PWM1__I2C1_SDA 0x3111 -MX28_PAD_PWM2__USB0_ID 0x3121 -MX28_PAD_SAIF0_MCLK__PWM_3 0x3141 -MX28_PAD_SAIF0_LRCLK__PWM_4 0x3151 -MX28_PAD_SAIF0_BITCLK__PWM_5 0x3161 -MX28_PAD_SAIF0_SDATA0__PWM_6 0x3171 -MX28_PAD_I2C0_SCL__TIMROT_ROTARYA 0x3181 -MX28_PAD_I2C0_SDA__TIMROT_ROTARYB 0x3191 -MX28_PAD_SAIF1_SDATA0__PWM_7 0x31a1 -MX28_PAD_LCD_RESET__LCD_VSYNC 0x31e1 -MX28_PAD_ENET0_MDC__GPMI_CE4N 0x4001 -MX28_PAD_ENET0_MDIO__GPMI_CE5N 0x4011 -MX28_PAD_ENET0_RX_EN__GPMI_CE6N 0x4021 -MX28_PAD_ENET0_RXD0__GPMI_CE7N 0x4031 -MX28_PAD_ENET0_RXD1__GPMI_READY4 0x4041 -MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER 0x4051 -MX28_PAD_ENET0_TX_EN__GPMI_READY5 0x4061 -MX28_PAD_ENET0_TXD0__GPMI_READY6 0x4071 -MX28_PAD_ENET0_TXD1__GPMI_READY7 0x4081 -MX28_PAD_ENET0_RXD2__ENET1_RXD0 0x4091 -MX28_PAD_ENET0_RXD3__ENET1_RXD1 0x40a1 -MX28_PAD_ENET0_TXD2__ENET1_TXD0 0x40b1 -MX28_PAD_ENET0_TXD3__ENET1_TXD1 0x40c1 -MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER 0x40d1 -MX28_PAD_ENET0_COL__ENET1_TX_EN 0x40e1 -MX28_PAD_ENET0_CRS__ENET1_RX_EN 0x40f1 -MX28_PAD_GPMI_CE2N__ENET0_RX_ER 0x0122 -MX28_PAD_GPMI_CE3N__SAIF1_MCLK 0x0132 -MX28_PAD_GPMI_RDY0__USB0_ID 0x0142 -MX28_PAD_GPMI_RDY2__ENET0_TX_ER 0x0162 -MX28_PAD_GPMI_RDY3__HSADC_TRIGGER 0x0172 -MX28_PAD_GPMI_ALE__SSP3_D4 0x01a2 -MX28_PAD_GPMI_CLE__SSP3_D5 0x01b2 -MX28_PAD_LCD_D00__ETM_DA0 0x1002 -MX28_PAD_LCD_D01__ETM_DA1 0x1012 -MX28_PAD_LCD_D02__ETM_DA2 0x1022 -MX28_PAD_LCD_D03__ETM_DA3 0x1032 -MX28_PAD_LCD_D04__ETM_DA4 0x1042 -MX28_PAD_LCD_D05__ETM_DA5 0x1052 -MX28_PAD_LCD_D06__ETM_DA6 0x1062 -MX28_PAD_LCD_D07__ETM_DA7 0x1072 -MX28_PAD_LCD_D08__ETM_DA8 0x1082 -MX28_PAD_LCD_D09__ETM_DA9 0x1092 -MX28_PAD_LCD_D10__ETM_DA10 0x10a2 -MX28_PAD_LCD_D11__ETM_DA11 0x10b2 -MX28_PAD_LCD_D12__ETM_DA12 0x10c2 -MX28_PAD_LCD_D13__ETM_DA13 0x10d2 -MX28_PAD_LCD_D14__ETM_DA14 0x10e2 -MX28_PAD_LCD_D15__ETM_DA15 0x10f2 -MX28_PAD_LCD_D16__ETM_DA7 0x1102 -MX28_PAD_LCD_D17__ETM_DA6 0x1112 -MX28_PAD_LCD_D18__ETM_DA5 0x1122 -MX28_PAD_LCD_D19__ETM_DA4 0x1132 -MX28_PAD_LCD_D20__ETM_DA3 0x1142 -MX28_PAD_LCD_D21__ETM_DA2 0x1152 -MX28_PAD_LCD_D22__ETM_DA1 0x1162 -MX28_PAD_LCD_D23__ETM_DA0 0x1172 -MX28_PAD_LCD_RD_E__ETM_TCTL 0x1182 -MX28_PAD_LCD_WR_RWN__ETM_TCLK 0x1192 -MX28_PAD_LCD_HSYNC__ETM_TCTL 0x11d2 -MX28_PAD_LCD_DOTCLK__ETM_TCLK 0x11e2 -MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT 0x20c2 -MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN 0x20d2 -MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT 0x20e2 -MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN 0x20f2 -MX28_PAD_SSP2_SCK__SAIF0_SDATA1 0x2102 -MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 0x2112 -MX28_PAD_SSP2_MISO__SAIF1_SDATA1 0x2122 -MX28_PAD_SSP2_SS0__SAIF1_SDATA2 0x2132 -MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 0x2142 -MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 0x2152 -MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT 0x2182 -MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN 0x2192 -MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT 0x21a2 -MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN 0x21b2 -MX28_PAD_AUART0_RX__DUART_CTS 0x3002 -MX28_PAD_AUART0_TX__DUART_RTS 0x3012 -MX28_PAD_AUART0_CTS__DUART_RX 0x3022 -MX28_PAD_AUART0_RTS__DUART_TX 0x3032 -MX28_PAD_AUART1_RX__PWM_0 0x3042 -MX28_PAD_AUART1_TX__PWM_1 0x3052 -MX28_PAD_AUART1_CTS__TIMROT_ROTARYA 0x3062 -MX28_PAD_AUART1_RTS__TIMROT_ROTARYB 0x3072 -MX28_PAD_AUART2_RX__SSP3_D4 0x3082 -MX28_PAD_AUART2_TX__SSP3_D5 0x3092 -MX28_PAD_AUART2_CTS__SAIF1_BITCLK 0x30a2 -MX28_PAD_AUART2_RTS__SAIF1_LRCLK 0x30b2 -MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT 0x30c2 -MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN 0x30d2 -MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT 0x30e2 -MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN 0x30f2 -MX28_PAD_PWM0__DUART_RX 0x3102 -MX28_PAD_PWM1__DUART_TX 0x3112 -MX28_PAD_PWM2__USB1_OVERCURRENT 0x3122 -MX28_PAD_SAIF0_MCLK__AUART4_CTS 0x3142 -MX28_PAD_SAIF0_LRCLK__AUART4_RTS 0x3152 -MX28_PAD_SAIF0_BITCLK__AUART4_RX 0x3162 -MX28_PAD_SAIF0_SDATA0__AUART4_TX 0x3172 -MX28_PAD_I2C0_SCL__DUART_RX 0x3182 -MX28_PAD_I2C0_SDA__DUART_TX 0x3192 -MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 0x31a2 -MX28_PAD_SPDIF__ENET1_RX_ER 0x31b2 -MX28_PAD_ENET0_MDC__SAIF0_SDATA1 0x4002 -MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 0x4012 -MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 0x4022 -MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 0x4032 -MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT 0x4052 -MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT 0x4092 -MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN 0x40a2 -MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT 0x40b2 -MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN 0x40c2 -MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN 0x40d2 -MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT 0x40e2 -MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN 0x40f2 -MX28_PAD_GPMI_D00__GPIO_0_0 0x0003 -MX28_PAD_GPMI_D01__GPIO_0_1 0x0013 -MX28_PAD_GPMI_D02__GPIO_0_2 0x0023 -MX28_PAD_GPMI_D03__GPIO_0_3 0x0033 -MX28_PAD_GPMI_D04__GPIO_0_4 0x0043 -MX28_PAD_GPMI_D05__GPIO_0_5 0x0053 -MX28_PAD_GPMI_D06__GPIO_0_6 0x0063 -MX28_PAD_GPMI_D07__GPIO_0_7 0x0073 -MX28_PAD_GPMI_CE0N__GPIO_0_16 0x0103 -MX28_PAD_GPMI_CE1N__GPIO_0_17 0x0113 -MX28_PAD_GPMI_CE2N__GPIO_0_18 0x0123 -MX28_PAD_GPMI_CE3N__GPIO_0_19 0x0133 -MX28_PAD_GPMI_RDY0__GPIO_0_20 0x0143 -MX28_PAD_GPMI_RDY1__GPIO_0_21 0x0153 -MX28_PAD_GPMI_RDY2__GPIO_0_22 0x0163 -MX28_PAD_GPMI_RDY3__GPIO_0_23 0x0173 -MX28_PAD_GPMI_RDN__GPIO_0_24 0x0183 -MX28_PAD_GPMI_WRN__GPIO_0_25 0x0193 -MX28_PAD_GPMI_ALE__GPIO_0_26 0x01a3 -MX28_PAD_GPMI_CLE__GPIO_0_27 0x01b3 -MX28_PAD_GPMI_RESETN__GPIO_0_28 0x01c3 -MX28_PAD_LCD_D00__GPIO_1_0 0x1003 -MX28_PAD_LCD_D01__GPIO_1_1 0x1013 -MX28_PAD_LCD_D02__GPIO_1_2 0x1023 -MX28_PAD_LCD_D03__GPIO_1_3 0x1033 -MX28_PAD_LCD_D04__GPIO_1_4 0x1043 -MX28_PAD_LCD_D05__GPIO_1_5 0x1053 -MX28_PAD_LCD_D06__GPIO_1_6 0x1063 -MX28_PAD_LCD_D07__GPIO_1_7 0x1073 -MX28_PAD_LCD_D08__GPIO_1_8 0x1083 -MX28_PAD_LCD_D09__GPIO_1_9 0x1093 -MX28_PAD_LCD_D10__GPIO_1_10 0x10a3 -MX28_PAD_LCD_D11__GPIO_1_11 0x10b3 -MX28_PAD_LCD_D12__GPIO_1_12 0x10c3 -MX28_PAD_LCD_D13__GPIO_1_13 0x10d3 -MX28_PAD_LCD_D14__GPIO_1_14 0x10e3 -MX28_PAD_LCD_D15__GPIO_1_15 0x10f3 -MX28_PAD_LCD_D16__GPIO_1_16 0x1103 -MX28_PAD_LCD_D17__GPIO_1_17 0x1113 -MX28_PAD_LCD_D18__GPIO_1_18 0x1123 -MX28_PAD_LCD_D19__GPIO_1_19 0x1133 -MX28_PAD_LCD_D20__GPIO_1_20 0x1143 -MX28_PAD_LCD_D21__GPIO_1_21 0x1153 -MX28_PAD_LCD_D22__GPIO_1_22 0x1163 -MX28_PAD_LCD_D23__GPIO_1_23 0x1173 -MX28_PAD_LCD_RD_E__GPIO_1_24 0x1183 -MX28_PAD_LCD_WR_RWN__GPIO_1_25 0x1193 -MX28_PAD_LCD_RS__GPIO_1_26 0x11a3 -MX28_PAD_LCD_CS__GPIO_1_27 0x11b3 -MX28_PAD_LCD_VSYNC__GPIO_1_28 0x11c3 -MX28_PAD_LCD_HSYNC__GPIO_1_29 0x11d3 -MX28_PAD_LCD_DOTCLK__GPIO_1_30 0x11e3 -MX28_PAD_LCD_ENABLE__GPIO_1_31 0x11f3 -MX28_PAD_SSP0_DATA0__GPIO_2_0 0x2003 -MX28_PAD_SSP0_DATA1__GPIO_2_1 0x2013 -MX28_PAD_SSP0_DATA2__GPIO_2_2 0x2023 -MX28_PAD_SSP0_DATA3__GPIO_2_3 0x2033 -MX28_PAD_SSP0_DATA4__GPIO_2_4 0x2043 -MX28_PAD_SSP0_DATA5__GPIO_2_5 0x2053 -MX28_PAD_SSP0_DATA6__GPIO_2_6 0x2063 -MX28_PAD_SSP0_DATA7__GPIO_2_7 0x2073 -MX28_PAD_SSP0_CMD__GPIO_2_8 0x2083 -MX28_PAD_SSP0_DETECT__GPIO_2_9 0x2093 -MX28_PAD_SSP0_SCK__GPIO_2_10 0x20a3 -MX28_PAD_SSP1_SCK__GPIO_2_12 0x20c3 -MX28_PAD_SSP1_CMD__GPIO_2_13 0x20d3 -MX28_PAD_SSP1_DATA0__GPIO_2_14 0x20e3 -MX28_PAD_SSP1_DATA3__GPIO_2_15 0x20f3 -MX28_PAD_SSP2_SCK__GPIO_2_16 0x2103 -MX28_PAD_SSP2_MOSI__GPIO_2_17 0x2113 -MX28_PAD_SSP2_MISO__GPIO_2_18 0x2123 -MX28_PAD_SSP2_SS0__GPIO_2_19 0x2133 -MX28_PAD_SSP2_SS1__GPIO_2_20 0x2143 -MX28_PAD_SSP2_SS2__GPIO_2_21 0x2153 -MX28_PAD_SSP3_SCK__GPIO_2_24 0x2183 -MX28_PAD_SSP3_MOSI__GPIO_2_25 0x2193 -MX28_PAD_SSP3_MISO__GPIO_2_26 0x21a3 -MX28_PAD_SSP3_SS0__GPIO_2_27 0x21b3 -MX28_PAD_AUART0_RX__GPIO_3_0 0x3003 -MX28_PAD_AUART0_TX__GPIO_3_1 0x3013 -MX28_PAD_AUART0_CTS__GPIO_3_2 0x3023 -MX28_PAD_AUART0_RTS__GPIO_3_3 0x3033 -MX28_PAD_AUART1_RX__GPIO_3_4 0x3043 -MX28_PAD_AUART1_TX__GPIO_3_5 0x3053 -MX28_PAD_AUART1_CTS__GPIO_3_6 0x3063 -MX28_PAD_AUART1_RTS__GPIO_3_7 0x3073 -MX28_PAD_AUART2_RX__GPIO_3_8 0x3083 -MX28_PAD_AUART2_TX__GPIO_3_9 0x3093 -MX28_PAD_AUART2_CTS__GPIO_3_10 0x30a3 -MX28_PAD_AUART2_RTS__GPIO_3_11 0x30b3 -MX28_PAD_AUART3_RX__GPIO_3_12 0x30c3 -MX28_PAD_AUART3_TX__GPIO_3_13 0x30d3 -MX28_PAD_AUART3_CTS__GPIO_3_14 0x30e3 -MX28_PAD_AUART3_RTS__GPIO_3_15 0x30f3 -MX28_PAD_PWM0__GPIO_3_16 0x3103 -MX28_PAD_PWM1__GPIO_3_17 0x3113 -MX28_PAD_PWM2__GPIO_3_18 0x3123 -MX28_PAD_SAIF0_MCLK__GPIO_3_20 0x3143 -MX28_PAD_SAIF0_LRCLK__GPIO_3_21 0x3153 -MX28_PAD_SAIF0_BITCLK__GPIO_3_22 0x3163 -MX28_PAD_SAIF0_SDATA0__GPIO_3_23 0x3173 -MX28_PAD_I2C0_SCL__GPIO_3_24 0x3183 -MX28_PAD_I2C0_SDA__GPIO_3_25 0x3193 -MX28_PAD_SAIF1_SDATA0__GPIO_3_26 0x31a3 -MX28_PAD_SPDIF__GPIO_3_27 0x31b3 -MX28_PAD_PWM3__GPIO_3_28 0x31c3 -MX28_PAD_PWM4__GPIO_3_29 0x31d3 -MX28_PAD_LCD_RESET__GPIO_3_30 0x31e3 -MX28_PAD_ENET0_MDC__GPIO_4_0 0x4003 -MX28_PAD_ENET0_MDIO__GPIO_4_1 0x4013 -MX28_PAD_ENET0_RX_EN__GPIO_4_2 0x4023 -MX28_PAD_ENET0_RXD0__GPIO_4_3 0x4033 -MX28_PAD_ENET0_RXD1__GPIO_4_4 0x4043 -MX28_PAD_ENET0_TX_CLK__GPIO_4_5 0x4053 -MX28_PAD_ENET0_TX_EN__GPIO_4_6 0x4063 -MX28_PAD_ENET0_TXD0__GPIO_4_7 0x4073 -MX28_PAD_ENET0_TXD1__GPIO_4_8 0x4083 -MX28_PAD_ENET0_RXD2__GPIO_4_9 0x4093 -MX28_PAD_ENET0_RXD3__GPIO_4_10 0x40a3 -MX28_PAD_ENET0_TXD2__GPIO_4_11 0x40b3 -MX28_PAD_ENET0_TXD3__GPIO_4_12 0x40c3 -MX28_PAD_ENET0_RX_CLK__GPIO_4_13 0x40d3 -MX28_PAD_ENET0_COL__GPIO_4_14 0x40e3 -MX28_PAD_ENET0_CRS__GPIO_4_15 0x40f3 -MX28_PAD_ENET_CLK__GPIO_4_16 0x4103 -MX28_PAD_JTAG_RTCK__GPIO_4_20 0x4143 - -Valid values for i.MX23 pinmux-id: - -pinmux id ------- -- -MX23_PAD_GPMI_D00__GPMI_D00 0x0000 -MX23_PAD_GPMI_D01__GPMI_D01 0x0010 -MX23_PAD_GPMI_D02__GPMI_D02 0x0020 -MX23_PAD_GPMI_D03__GPMI_D03 0x0030 -MX23_PAD_GPMI_D04__GPMI_D04 0x0040 -MX23_PAD_GPMI_D05__GPMI_D05 0x0050 -MX23_PAD_GPMI_D06__GPMI_D06 0x0060 -MX23_PAD_GPMI_D07__GPMI_D07 0x0070 -MX23_PAD_GPMI_D08__GPMI_D08 0x0080 -MX23_PAD_GPMI_D09__GPMI_D09 0x0090 -MX23_PAD_GPMI_D10__GPMI_D10 0x00a0 -MX23_PAD_GPMI_D11__GPMI_D11 0x00b0 -MX23_PAD_GPMI_D12__GPMI_D12 0x00c0 -MX23_PAD_GPMI_D13__GPMI_D13 0x00d0 -MX23_PAD_GPMI_D14__GPMI_D14 0x00e0 -MX23_PAD_GPMI_D15__GPMI_D15 0x00f0 -MX23_PAD_GPMI_CLE__GPMI_CLE 0x0100 -MX23_PAD_GPMI_ALE__GPMI_ALE 0x0110 -MX23_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 -MX23_PAD_GPMI_RDY0__GPMI_RDY0 0x0130 -MX23_PAD_GPMI_RDY1__GPMI_RDY1 0x0140 -MX23_PAD_GPMI_RDY2__GPMI_RDY2 0x0150 -MX23_PAD_GPMI_RDY3__GPMI_RDY3 0x0160 -MX23_PAD_GPMI_WPN__GPMI_WPN 0x0170 -MX23_PAD_GPMI_WRN__GPMI_WRN 0x0180 -MX23_PAD_GPMI_RDN__GPMI_RDN 0x0190 -MX23_PAD_AUART1_CTS__AUART1_CTS 0x01a0 -MX23_PAD_AUART1_RTS__AUART1_RTS 0x01b0 -MX23_PAD_AUART1_RX__AUART1_RX 0x01c0 -MX23_PAD_AUART1_TX__AUART1_TX 0x01d0 -MX23_PAD_I2C_SCL__I2C_SCL 0x01e0 -MX23_PAD_I2C_SDA__I2C_SDA 0x01f0 -MX23_PAD_LCD_D00__LCD_D00 0x1000 -MX23_PAD_LCD_D01__LCD_D01 0x1010 -MX23_PAD_LCD_D02__LCD_D02 0x1020 -MX23_PAD_LCD_D03__LCD_D03 0x1030 -MX23_PAD_LCD_D04__LCD_D04 0x1040 -MX23_PAD_LCD_D05__LCD_D05 0x1050 -MX23_PAD_LCD_D06__LCD_D06 0x1060 -MX23_PAD_LCD_D07__LCD_D07 0x1070 -MX23_PAD_LCD_D08__LCD_D08 0x1080 -MX23_PAD_LCD_D09__LCD_D09 0x1090 -MX23_PAD_LCD_D10__LCD_D10 0x10a0 -MX23_PAD_LCD_D11__LCD_D11 0x10b0 -MX23_PAD_LCD_D12__LCD_D12 0x10c0 -MX23_PAD_LCD_D13__LCD_D13 0x10d0 -MX23_PAD_LCD_D14__LCD_D14 0x10e0 -MX23_PAD_LCD_D15__LCD_D15 0x10f0 -MX23_PAD_LCD_D16__LCD_D16 0x1100 -MX23_PAD_LCD_D17__LCD_D17 0x1110 -MX23_PAD_LCD_RESET__LCD_RESET 0x1120 -MX23_PAD_LCD_RS__LCD_RS 0x1130 -MX23_PAD_LCD_WR__LCD_WR 0x1140 -MX23_PAD_LCD_CS__LCD_CS 0x1150 -MX23_PAD_LCD_DOTCK__LCD_DOTCK 0x1160 -MX23_PAD_LCD_ENABLE__LCD_ENABLE 0x1170 -MX23_PAD_LCD_HSYNC__LCD_HSYNC 0x1180 -MX23_PAD_LCD_VSYNC__LCD_VSYNC 0x1190 -MX23_PAD_PWM0__PWM0 0x11a0 -MX23_PAD_PWM1__PWM1 0x11b0 -MX23_PAD_PWM2__PWM2 0x11c0 -MX23_PAD_PWM3__PWM3 0x11d0 -MX23_PAD_PWM4__PWM4 0x11e0 -MX23_PAD_SSP1_CMD__SSP1_CMD 0x2000 -MX23_PAD_SSP1_DETECT__SSP1_DETECT 0x2010 -MX23_PAD_SSP1_DATA0__SSP1_DATA0 0x2020 -MX23_PAD_SSP1_DATA1__SSP1_DATA1 0x2030 -MX23_PAD_SSP1_DATA2__SSP1_DATA2 0x2040 -MX23_PAD_SSP1_DATA3__SSP1_DATA3 0x2050 -MX23_PAD_SSP1_SCK__SSP1_SCK 0x2060 -MX23_PAD_ROTARYA__ROTARYA 0x2070 -MX23_PAD_ROTARYB__ROTARYB 0x2080 -MX23_PAD_EMI_A00__EMI_A00 0x2090 -MX23_PAD_EMI_A01__EMI_A01 0x20a0 -MX23_PAD_EMI_A02__EMI_A02 0x20b0 -MX23_PAD_EMI_A03__EMI_A03 0x20c0 -MX23_PAD_EMI_A04__EMI_A04 0x20d0 -MX23_PAD_EMI_A05__EMI_A05 0x20e0 -MX23_PAD_EMI_A06__EMI_A06 0x20f0 -MX23_PAD_EMI_A07__EMI_A07 0x2100 -MX23_PAD_EMI_A08__EMI_A08 0x2110 -MX23_PAD_EMI_A09__EMI_A09 0x2120 -MX23_PAD_EMI_A10__EMI_A10 0x2130 -MX23_PAD_EMI_A11__EMI_A11 0x2140 -MX23_PAD_EMI_A12__EMI_A12 0x2150 -MX23_PAD_EMI_BA0__EMI_BA0 0x2160 -MX23_PAD_EMI_BA1__EMI_BA1 0x2170 -MX23_PAD_EMI_CASN__EMI_CASN 0x2180 -MX23_PAD_EMI_CE0N__EMI_CE0N 0x2190 -MX23_PAD_EMI_CE1N__EMI_CE1N 0x21a0 -MX23_PAD_GPMI_CE1N__GPMI_CE1N 0x21b0 -MX23_PAD_GPMI_CE0N__GPMI_CE0N 0x21c0 -MX23_PAD_EMI_CKE__EMI_CKE 0x21d0 -MX23_PAD_EMI_RASN__EMI_RASN 0x21e0 -MX23_PAD_EMI_WEN__EMI_WEN 0x21f0 -MX23_PAD_EMI_D00__EMI_D00 0x3000 -MX23_PAD_EMI_D01__EMI_D01 0x3010 -MX23_PAD_EMI_D02__EMI_D02 0x3020 -MX23_PAD_EMI_D03__EMI_D03 0x3030 -MX23_PAD_EMI_D04__EMI_D04 0x3040 -MX23_PAD_EMI_D05__EMI_D05 0x3050 -MX23_PAD_EMI_D06__EMI_D06 0x3060 -MX23_PAD_EMI_D07__EMI_D07 0x3070 -MX23_PAD_EMI_D08__EMI_D08 0x3080 -MX23_PAD_EMI_D09__EMI_D09 0x3090 -MX23_PAD_EMI_D10__EMI_D10 0x30a0 -MX23_PAD_EMI_D11__EMI_D11 0x30b0 -MX23_PAD_EMI_D12__EMI_D12 0x30c0 -MX23_PAD_EMI_D13__EMI_D13 0x30d0 -MX23_PAD_EMI_D14__EMI_D14 0x30e0 -MX23_PAD_EMI_D15__EMI_D15 0x30f0 -MX23_PAD_EMI_DQM0__EMI_DQM0 0x3100 -MX23_PAD_EMI_DQM1__EMI_DQM1 0x3110 -MX23_PAD_EMI_DQS0__EMI_DQS0 0x3120 -MX23_PAD_EMI_DQS1__EMI_DQS1 0x3130 -MX23_PAD_EMI_CLK__EMI_CLK 0x3140 -MX23_PAD_EMI_CLKN__EMI_CLKN 0x3150 -MX23_PAD_GPMI_D00__LCD_D8 0x0001 -MX23_PAD_GPMI_D01__LCD_D9 0x0011 -MX23_PAD_GPMI_D02__LCD_D10 0x0021 -MX23_PAD_GPMI_D03__LCD_D11 0x0031 -MX23_PAD_GPMI_D04__LCD_D12 0x0041 -MX23_PAD_GPMI_D05__LCD_D13 0x0051 -MX23_PAD_GPMI_D06__LCD_D14 0x0061 -MX23_PAD_GPMI_D07__LCD_D15 0x0071 -MX23_PAD_GPMI_D08__LCD_D18 0x0081 -MX23_PAD_GPMI_D09__LCD_D19 0x0091 -MX23_PAD_GPMI_D10__LCD_D20 0x00a1 -MX23_PAD_GPMI_D11__LCD_D21 0x00b1 -MX23_PAD_GPMI_D12__LCD_D22 0x00c1 -MX23_PAD_GPMI_D13__LCD_D23 0x00d1 -MX23_PAD_GPMI_D14__AUART2_RX 0x00e1 -MX23_PAD_GPMI_D15__AUART2_TX 0x00f1 -MX23_PAD_GPMI_CLE__LCD_D16 0x0101 -MX23_PAD_GPMI_ALE__LCD_D17 0x0111 -MX23_PAD_GPMI_CE2N__ATA_A2 0x0121 -MX23_PAD_AUART1_RTS__IR_CLK 0x01b1 -MX23_PAD_AUART1_RX__IR_RX 0x01c1 -MX23_PAD_AUART1_TX__IR_TX 0x01d1 -MX23_PAD_I2C_SCL__GPMI_RDY2 0x01e1 -MX23_PAD_I2C_SDA__GPMI_CE2N 0x01f1 -MX23_PAD_LCD_D00__ETM_DA8 0x1001 -MX23_PAD_LCD_D01__ETM_DA9 0x1011 -MX23_PAD_LCD_D02__ETM_DA10 0x1021 -MX23_PAD_LCD_D03__ETM_DA11 0x1031 -MX23_PAD_LCD_D04__ETM_DA12 0x1041 -MX23_PAD_LCD_D05__ETM_DA13 0x1051 -MX23_PAD_LCD_D06__ETM_DA14 0x1061 -MX23_PAD_LCD_D07__ETM_DA15 0x1071 -MX23_PAD_LCD_D08__ETM_DA0 0x1081 -MX23_PAD_LCD_D09__ETM_DA1 0x1091 -MX23_PAD_LCD_D10__ETM_DA2 0x10a1 -MX23_PAD_LCD_D11__ETM_DA3 0x10b1 -MX23_PAD_LCD_D12__ETM_DA4 0x10c1 -MX23_PAD_LCD_D13__ETM_DA5 0x10d1 -MX23_PAD_LCD_D14__ETM_DA6 0x10e1 -MX23_PAD_LCD_D15__ETM_DA7 0x10f1 -MX23_PAD_LCD_RESET__ETM_TCTL 0x1121 -MX23_PAD_LCD_RS__ETM_TCLK 0x1131 -MX23_PAD_LCD_DOTCK__GPMI_RDY3 0x1161 -MX23_PAD_LCD_ENABLE__I2C_SCL 0x1171 -MX23_PAD_LCD_HSYNC__I2C_SDA 0x1181 -MX23_PAD_LCD_VSYNC__LCD_BUSY 0x1191 -MX23_PAD_PWM0__ROTARYA 0x11a1 -MX23_PAD_PWM1__ROTARYB 0x11b1 -MX23_PAD_PWM2__GPMI_RDY3 0x11c1 -MX23_PAD_PWM3__ETM_TCTL 0x11d1 -MX23_PAD_PWM4__ETM_TCLK 0x11e1 -MX23_PAD_SSP1_DETECT__GPMI_CE3N 0x2011 -MX23_PAD_SSP1_DATA1__I2C_SCL 0x2031 -MX23_PAD_SSP1_DATA2__I2C_SDA 0x2041 -MX23_PAD_ROTARYA__AUART2_RTS 0x2071 -MX23_PAD_ROTARYB__AUART2_CTS 0x2081 -MX23_PAD_GPMI_D00__SSP2_DATA0 0x0002 -MX23_PAD_GPMI_D01__SSP2_DATA1 0x0012 -MX23_PAD_GPMI_D02__SSP2_DATA2 0x0022 -MX23_PAD_GPMI_D03__SSP2_DATA3 0x0032 -MX23_PAD_GPMI_D04__SSP2_DATA4 0x0042 -MX23_PAD_GPMI_D05__SSP2_DATA5 0x0052 -MX23_PAD_GPMI_D06__SSP2_DATA6 0x0062 -MX23_PAD_GPMI_D07__SSP2_DATA7 0x0072 -MX23_PAD_GPMI_D08__SSP1_DATA4 0x0082 -MX23_PAD_GPMI_D09__SSP1_DATA5 0x0092 -MX23_PAD_GPMI_D10__SSP1_DATA6 0x00a2 -MX23_PAD_GPMI_D11__SSP1_DATA7 0x00b2 -MX23_PAD_GPMI_D15__GPMI_CE3N 0x00f2 -MX23_PAD_GPMI_RDY0__SSP2_DETECT 0x0132 -MX23_PAD_GPMI_RDY1__SSP2_CMD 0x0142 -MX23_PAD_GPMI_WRN__SSP2_SCK 0x0182 -MX23_PAD_AUART1_CTS__SSP1_DATA4 0x01a2 -MX23_PAD_AUART1_RTS__SSP1_DATA5 0x01b2 -MX23_PAD_AUART1_RX__SSP1_DATA6 0x01c2 -MX23_PAD_AUART1_TX__SSP1_DATA7 0x01d2 -MX23_PAD_I2C_SCL__AUART1_TX 0x01e2 -MX23_PAD_I2C_SDA__AUART1_RX 0x01f2 -MX23_PAD_LCD_D08__SAIF2_SDATA0 0x1082 -MX23_PAD_LCD_D09__SAIF1_SDATA0 0x1092 -MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK 0x10a2 -MX23_PAD_LCD_D11__SAIF_LRCLK 0x10b2 -MX23_PAD_LCD_D12__SAIF2_SDATA1 0x10c2 -MX23_PAD_LCD_D13__SAIF2_SDATA2 0x10d2 -MX23_PAD_LCD_D14__SAIF1_SDATA2 0x10e2 -MX23_PAD_LCD_D15__SAIF1_SDATA1 0x10f2 -MX23_PAD_LCD_D16__SAIF_ALT_BITCLK 0x1102 -MX23_PAD_LCD_RESET__GPMI_CE3N 0x1122 -MX23_PAD_PWM0__DUART_RX 0x11a2 -MX23_PAD_PWM1__DUART_TX 0x11b2 -MX23_PAD_PWM3__AUART1_CTS 0x11d2 -MX23_PAD_PWM4__AUART1_RTS 0x11e2 -MX23_PAD_SSP1_CMD__JTAG_TDO 0x2002 -MX23_PAD_SSP1_DETECT__USB_OTG_ID 0x2012 -MX23_PAD_SSP1_DATA0__JTAG_TDI 0x2022 -MX23_PAD_SSP1_DATA1__JTAG_TCLK 0x2032 -MX23_PAD_SSP1_DATA2__JTAG_RTCK 0x2042 -MX23_PAD_SSP1_DATA3__JTAG_TMS 0x2052 -MX23_PAD_SSP1_SCK__JTAG_TRST 0x2062 -MX23_PAD_ROTARYA__SPDIF 0x2072 -MX23_PAD_ROTARYB__GPMI_CE3N 0x2082 -MX23_PAD_GPMI_D00__GPIO_0_0 0x0003 -MX23_PAD_GPMI_D01__GPIO_0_1 0x0013 -MX23_PAD_GPMI_D02__GPIO_0_2 0x0023 -MX23_PAD_GPMI_D03__GPIO_0_3 0x0033 -MX23_PAD_GPMI_D04__GPIO_0_4 0x0043 -MX23_PAD_GPMI_D05__GPIO_0_5 0x0053 -MX23_PAD_GPMI_D06__GPIO_0_6 0x0063 -MX23_PAD_GPMI_D07__GPIO_0_7 0x0073 -MX23_PAD_GPMI_D08__GPIO_0_8 0x0083 -MX23_PAD_GPMI_D09__GPIO_0_9 0x0093 -MX23_PAD_GPMI_D10__GPIO_0_10 0x00a3 -MX23_PAD_GPMI_D11__GPIO_0_11 0x00b3 -MX23_PAD_GPMI_D12__GPIO_0_12 0x00c3 -MX23_PAD_GPMI_D13__GPIO_0_13 0x00d3 -MX23_PAD_GPMI_D14__GPIO_0_14 0x00e3 -MX23_PAD_GPMI_D15__GPIO_0_15 0x00f3 -MX23_PAD_GPMI_CLE__GPIO_0_16 0x0103 -MX23_PAD_GPMI_ALE__GPIO_0_17 0x0113 -MX23_PAD_GPMI_CE2N__GPIO_0_18 0x0123 -MX23_PAD_GPMI_RDY0__GPIO_0_19 0x0133 -MX23_PAD_GPMI_RDY1__GPIO_0_20 0x0143 -MX23_PAD_GPMI_RDY2__GPIO_0_21 0x0153 -MX23_PAD_GPMI_RDY3__GPIO_0_22 0x0163 -MX23_PAD_GPMI_WPN__GPIO_0_23 0x0173 -MX23_PAD_GPMI_WRN__GPIO_0_24 0x0183 -MX23_PAD_GPMI_RDN__GPIO_0_25 0x0193 -MX23_PAD_AUART1_CTS__GPIO_0_26 0x01a3 -MX23_PAD_AUART1_RTS__GPIO_0_27 0x01b3 -MX23_PAD_AUART1_RX__GPIO_0_28 0x01c3 -MX23_PAD_AUART1_TX__GPIO_0_29 0x01d3 -MX23_PAD_I2C_SCL__GPIO_0_30 0x01e3 -MX23_PAD_I2C_SDA__GPIO_0_31 0x01f3 -MX23_PAD_LCD_D00__GPIO_1_0 0x1003 -MX23_PAD_LCD_D01__GPIO_1_1 0x1013 -MX23_PAD_LCD_D02__GPIO_1_2 0x1023 -MX23_PAD_LCD_D03__GPIO_1_3 0x1033 -MX23_PAD_LCD_D04__GPIO_1_4 0x1043 -MX23_PAD_LCD_D05__GPIO_1_5 0x1053 -MX23_PAD_LCD_D06__GPIO_1_6 0x1063 -MX23_PAD_LCD_D07__GPIO_1_7 0x1073 -MX23_PAD_LCD_D08__GPIO_1_8 0x1083 -MX23_PAD_LCD_D09__GPIO_1_9 0x1093 -MX23_PAD_LCD_D10__GPIO_1_10 0x10a3 -MX23_PAD_LCD_D11__GPIO_1_11 0x10b3 -MX23_PAD_LCD_D12__GPIO_1_12 0x10c3 -MX23_PAD_LCD_D13__GPIO_1_13 0x10d3 -MX23_PAD_LCD_D14__GPIO_1_14 0x10e3 -MX23_PAD_LCD_D15__GPIO_1_15 0x10f3 -MX23_PAD_LCD_D16__GPIO_1_16 0x1103 -MX23_PAD_LCD_D17__GPIO_1_17 0x1113 -MX23_PAD_LCD_RESET__GPIO_1_18 0x1123 -MX23_PAD_LCD_RS__GPIO_1_19 0x1133 -MX23_PAD_LCD_WR__GPIO_1_20 0x1143 -MX23_PAD_LCD_CS__GPIO_1_21 0x1153 -MX23_PAD_LCD_DOTCK__GPIO_1_22 0x1163 -MX23_PAD_LCD_ENABLE__GPIO_1_23 0x1173 -MX23_PAD_LCD_HSYNC__GPIO_1_24 0x1183 -MX23_PAD_LCD_VSYNC__GPIO_1_25 0x1193 -MX23_PAD_PWM0__GPIO_1_26 0x11a3 -MX23_PAD_PWM1__GPIO_1_27 0x11b3 -MX23_PAD_PWM2__GPIO_1_28 0x11c3 -MX23_PAD_PWM3__GPIO_1_29 0x11d3 -MX23_PAD_PWM4__GPIO_1_30 0x11e3 -MX23_PAD_SSP1_CMD__GPIO_2_0 0x2003 -MX23_PAD_SSP1_DETECT__GPIO_2_1 0x2013 -MX23_PAD_SSP1_DATA0__GPIO_2_2 0x2023 -MX23_PAD_SSP1_DATA1__GPIO_2_3 0x2033 -MX23_PAD_SSP1_DATA2__GPIO_2_4 0x2043 -MX23_PAD_SSP1_DATA3__GPIO_2_5 0x2053 -MX23_PAD_SSP1_SCK__GPIO_2_6 0x2063 -MX23_PAD_ROTARYA__GPIO_2_7 0x2073 -MX23_PAD_ROTARYB__GPIO_2_8 0x2083 -MX23_PAD_EMI_A00__GPIO_2_9 0x2093 -MX23_PAD_EMI_A01__GPIO_2_10 0x20a3 -MX23_PAD_EMI_A02__GPIO_2_11 0x20b3 -MX23_PAD_EMI_A03__GPIO_2_12 0x20c3 -MX23_PAD_EMI_A04__GPIO_2_13 0x20d3 -MX23_PAD_EMI_A05__GPIO_2_14 0x20e3 -MX23_PAD_EMI_A06__GPIO_2_15 0x20f3 -MX23_PAD_EMI_A07__GPIO_2_16 0x2103 -MX23_PAD_EMI_A08__GPIO_2_17 0x2113 -MX23_PAD_EMI_A09__GPIO_2_18 0x2123 -MX23_PAD_EMI_A10__GPIO_2_19 0x2133 -MX23_PAD_EMI_A11__GPIO_2_20 0x2143 -MX23_PAD_EMI_A12__GPIO_2_21 0x2153 -MX23_PAD_EMI_BA0__GPIO_2_22 0x2163 -MX23_PAD_EMI_BA1__GPIO_2_23 0x2173 -MX23_PAD_EMI_CASN__GPIO_2_24 0x2183 -MX23_PAD_EMI_CE0N__GPIO_2_25 0x2193 -MX23_PAD_EMI_CE1N__GPIO_2_26 0x21a3 -MX23_PAD_GPMI_CE1N__GPIO_2_27 0x21b3 -MX23_PAD_GPMI_CE0N__GPIO_2_28 0x21c3 -MX23_PAD_EMI_CKE__GPIO_2_29 0x21d3 -MX23_PAD_EMI_RASN__GPIO_2_30 0x21e3 -MX23_PAD_EMI_WEN__GPIO_2_31 0x21f3 +Valid values for i.MX28/i.MX23 pinmux-id are defined in +arch/arm/boot/dts/imx28-pinfunc.h and arch/arm/boot/dts/imx23-pinfunc.h. +The definitions for the padconfig properties can be found in +arch/arm/boot/dts/mxs-pinfunc.h. diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt index 330d6ec15401..439a41c79afa 100644 --- a/Documentation/devicetree/bindings/usb/ux500-usb.txt +++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt @@ -15,7 +15,7 @@ Optional properties: Example: usb_per5@a03e0000 { - compatible = "stericsson,db8500-musb", "mentor,musb"; + compatible = "stericsson,db8500-musb"; reg = <0xa03e0000 0x10000>; interrupts = <0 23 0x4>; interrupt-names = "mc"; diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index 323983be3c30..50decf8e1b90 100644 --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt @@ -12,7 +12,19 @@ Required properties: a) phandle of the gpio controller node. b) pin number within the gpio controller. c) optional flags and pull up/down. - +- clocks: list of clock IDs from SoC clock driver. + a) hdmi: Gate of HDMI IP bus clock. + b) sclk_hdmi: Gate of HDMI special clock. + c) sclk_pixel: Pixel special clock, one of the two possible inputs of + HDMI clock mux. + d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of + HDMI clock mux. + e) mout_hdmi: It is required by the driver to switch between the 2 + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable + after configuration, parent is set to sclk_hdmiphy else + sclk_pixel. +- clock-names: aliases as per driver requirements for above clock IDs: + "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". Example: hdmi { diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt index 3334b0a8e343..7bfde9c9d658 100644 --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt @@ -10,6 +10,10 @@ Required properties: - reg: physical base address of the mixer and length of memory mapped region. - interrupts: interrupt number to the cpu. +- clocks: list of clock IDs from SoC clock driver. + a) mixer: Gate of Mixer IP bus clock. + b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of + mixer mux. Example: diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1ad6fb6c094d..5ef81367a8e8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -727,6 +727,7 @@ config ARCH_S3C64XX select ARM_VIC select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM + select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -740,7 +741,6 @@ config ARCH_S3C64XX select S3C_DEV_NAND select S3C_GPIO_TRACK select SAMSUNG_ATAGS - select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_WDT_RESET select USB_ARCH_HAS_OHCI diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e3a8f226bf52..f2ff6266f789 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-d2plug.dtb \ + dove-d3plug.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ @@ -112,6 +113,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ + armada-xp-matrix.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-karo-tx25.dtb \ @@ -142,8 +144,10 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -159,6 +163,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10057.dtb \ imx28-cfa10058.dtb \ imx28-evk.dtb \ + imx28-m28cu3.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb @@ -200,11 +205,15 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ - ste-hrefprev60.dtb \ - ste-hrefv60plus.dtb \ + ste-hrefprev60-stuib.dtb \ + ste-hrefprev60-tvk.dtb \ + ste-hrefv60plus-stuib.dtb \ + ste-hrefv60plus-tvk.dtb \ ste-ccu8540.dtb \ ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb +dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ + s3c6410-smdk6410.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ emev2-kzm9d-reference.dtb \ r8a7740-armadillo800eva.dtb \ @@ -221,7 +230,9 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a73a4-ape6evm-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb -dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ +dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ + socfpga_cyclone5_socdk.dtb \ + socfpga_cyclone5_sockit.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb @@ -243,6 +254,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun5i-a13-olinuxino.dtb \ sun6i-a31-colombus.dtb \ sun7i-a20-cubieboard2.dtb \ + sun7i-a20-cubietruck.dtb \ sun7i-a20-olinuxino-micro.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -257,7 +269,8 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra114-dalmore.dtb + tegra114-dalmore.dtb \ + tegra124-venice2.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 1de2dae0fdae..00d6a798c705 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -113,6 +113,7 @@ #interrupt-cells = <1>; #size-cells = <1>; interrupt-controller; + msi-controller; }; coherency-fabric@20200 { @@ -137,6 +138,14 @@ status = "disabled"; }; + coredivclk: corediv-clock@18740 { + compatible = "marvell,armada-370-corediv-clock"; + reg = <0x18740 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + timer@20300 { reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; @@ -176,7 +185,6 @@ i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <31>; @@ -187,7 +195,6 @@ i2c1: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; - reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <32>; @@ -252,4 +259,13 @@ }; }; + + clocks { + /* 2 GHz fixed main PLL */ + mainpll: mainpll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2000000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index e134d7a90c9a..7a4b82e71aaf 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -44,6 +44,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = @@ -218,6 +219,14 @@ }; }; + i2c0: i2c@11000 { + reg = <0x11000 0x20>; + }; + + i2c1: i2c@11100 { + reg = <0x11100 0x20>; + }; + usb@50000 { clocks = <&coreclk 0>; }; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts new file mode 100644 index 000000000000..e47c49ecd55c --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -0,0 +1,75 @@ +/* + * Device Tree file for Marvell Armada XP Matrix board + * + * Copyright (C) 2013 Marvell + * + * Lior Amsalem <[email protected]> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "armada-xp-mv78460.dtsi" + +/ { + model = "Marvell Armada XP Matrix Board"; + compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12300 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + ethernet@30000 { + status = "okay"; + phy-mode = "sgmii"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + + usb@50000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 0358a33cba48..3f5e6121c730 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -57,6 +57,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 0e82c5062243..3e9fd1353f89 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -58,6 +58,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index e82c1b80af17..31ba6d8fbadf 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -74,6 +74,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 3058522f5aad..281c6447e872 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -147,6 +147,16 @@ }; }; + i2c0: i2c@11000 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; + }; + usb@50000 { clocks = <&gateclk 18>; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 137354689ad0..cb2c010e08e2 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -96,7 +96,6 @@ }; spi0: spi@fffc8000 { - status = "okay"; cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; mtd_dataflash@0 { compatible = "atmel,at45", "atmel,dataflash"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 9fb7ffd32af2..6224f9fe2f2b 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -437,6 +437,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>, + <&dma 0 AT91_DMA_CFG_PER_ID(22)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 27a9352b9d7a..e9487f6f0166 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -38,9 +38,18 @@ status = "okay"; }; + ssc0: ssc@f0010000 { + status = "okay"; + }; + i2c0: i2c@f8010000 { status = "okay"; + wm8904: codec@1a { + compatible = "wm8904"; + reg = <0x1a>; + }; + qt1070: keyboard@1b { compatible = "qt1070"; reg = <0x1b>; @@ -82,6 +91,13 @@ <AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; }; + + sound { + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; }; spi0: spi@f0000000 { @@ -142,4 +158,22 @@ gpio-key,wakeup; }; }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ AT91SAM9N12"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; }; diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts index 61a8062e56de..50c0d6904497 100644 --- a/arch/arm/boot/dts/dove-cm-a510.dts +++ b/arch/arm/boot/dts/dove-cm-a510.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "Compulab CM-A510"; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 022646ef4b38..8349a248ecea 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "SolidRun CuBox"; @@ -99,18 +99,12 @@ silabs,pll-master; }; - clkout1 { - reg = <1>; - silabs,drive-strength = <8>; - silabs,multisynth-source = <1>; - silabs,clock-source = <0>; - silabs,pll-master; - }; - clkout2 { reg = <2>; + silabs,drive-strength = <8>; silabs,multisynth-source = <1>; silabs,clock-source = <0>; + silabs,pll-master; }; }; }; @@ -132,3 +126,11 @@ reg = <0>; }; }; + +&audio1 { + status = "okay"; + clocks = <&gate_clk 13>, <&si5351 2>; + clock-names = "internal", "extclk"; + pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts index e2222ce94f2f..c11d3636c8e5 100644 --- a/arch/arm/boot/dts/dove-d2plug.dts +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "Globalscale D2Plug"; diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts new file mode 100644 index 000000000000..f5f59bb5a534 --- /dev/null +++ b/arch/arm/boot/dts/dove-d3plug.dts @@ -0,0 +1,103 @@ +/dts-v1/; + +#include "dove.dtsi" + +/ { + model = "Globalscale D3Plug"; + compatible = "globalscale,d3plug", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; + pinctrl-names = "default"; + + wlan-act { + label = "wlan-act"; + gpios = <&gpio0 0 1>; + }; + + wlan-ap { + label = "wlan-ap"; + gpios = <&gpio0 1 1>; + }; + + status { + label = "status"; + gpios = <&gpio0 2 1>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 0>; + pinctrl-0 = <&pmx_gpio_8>; + pinctrl-names = "default"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +/* Samsung M8G2F eMMC */ +&sdio0 { + status = "okay"; + non-removable; + bus-width = <4>; +}; + +/* Marvell SD8787 WLAN/BT */ +&sdio1 { + status = "okay"; + non-removable; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 2M Flash Macronix MX25L1605D */ + spi-flash@0 { + compatible = "st,m25l1605d"; + spi-max-frequency = <86000000>; + reg = <0>; + }; +}; + +&pcie { + status = "okay"; + /* Fresco Logic USB3.0 xHCI controller */ + pcie-port@0 { + status = "okay"; + reset-gpios = <&gpio0 26 1>; + reset-delay-us = <20000>; + pinctrl-0 = <&pmx_camera_gpio>; + pinctrl-names = "default"; + }; + /* Mini-PCIe slot */ + pcie-port@1 { + status = "okay"; + reset-gpios = <&gpio0 25 1>; + }; +}; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts index e5a920beab45..bb725dca3a10 100644 --- a/arch/arm/boot/dts/dove-dove-db.dts +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "Marvell DB-MV88AP510-BP Development Board"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index cc279166646f..113a8bc7bee7 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -1,8 +1,11 @@ /include/ "skeleton.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; + interrupt-parent = <&intc>; aliases { gpio0 = &gpio0; @@ -27,482 +30,576 @@ marvell,tauros2-cache-features = <0>; }; - soc@f1000000 { - compatible = "simple-bus"; - #address-cells = <1>; + mbus { + compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus"; + #address-cells = <2>; #size-cells = <1>; - interrupt-parent = <&intc>; - - ranges = <0xc8000000 0xc8000000 0x0100000 /* CESA SRAM 1M */ - 0xe0000000 0xe0000000 0x8000000 /* PCIe0 Mem 128M */ - 0xe8000000 0xe8000000 0x8000000 /* PCIe1 Mem 128M */ - 0xf0000000 0xf0000000 0x0100000 /* ScratchPad 1M */ - 0x00000000 0xf1000000 0x1000000 /* SB/NB regs 16M */ - 0xf2000000 0xf2000000 0x0100000 /* PCIe0 I/O 1M */ - 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ - 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; - clocks = <&core_clk 0>; - }; - - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <0>; - marvell,#interrupts = <5>; - }; - - core_clk: core-clocks@d0214 { - compatible = "marvell,dove-core-clock"; - reg = <0xd0214 0x4>; - #clock-cells = <1>; - }; - - gate_clk: clock-gating-ctrl@d0038 { - compatible = "marvell,dove-gating-clock"; - reg = <0xd0038 0x4>; - clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - thermal: thermal-diode@d001c { - compatible = "marvell,dove-thermal"; - reg = <0xd001c 0x0c>, <0xd005c 0x08>; - }; - - uart0: serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <7>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - uart1: serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <8>; - clocks = <&core_clk 0>; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart2: serial@12200 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <9>; - clocks = <&core_clk 0>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */ + pcie-io-aperture = <0xf2000000 0x00200000>; /* 2M I/O space */ + + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000 /* MBUS regs 1M */ + MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000 /* AXI regs 16M */ + MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000 /* BootROM 128M */ + MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */ + MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */ + + pcie: pcie-controller { + compatible = "marvell,dove-pcie"; status = "disabled"; - }; - - uart3: serial@12300 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - gpio0: gpio-ctrl@d0400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0400 0x20>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <12>, <13>, <14>, <60>; - }; - - gpio1: gpio-ctrl@d0420 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0420 0x20>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <61>; - }; - - gpio2: gpio-ctrl@e8400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe8400 0x0c>; - ngpios = <8>; - }; - - pinctrl: pin-ctrl@d0200 { - compatible = "marvell,dove-pinctrl"; - reg = <0xd0200 0x10>; - clocks = <&gate_clk 22>; - - pmx_gpio_0: pmx-gpio-0 { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_gpio_1: pmx-gpio-1 { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_gpio_2: pmx-gpio-2 { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_gpio_3: pmx-gpio-3 { - marvell,pins = "mpp3"; - marvell,function = "gpio"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&intc>; + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000 + 0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000 + 0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 Mem */ + 0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 I/O */ + 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */ + 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */ + + pcie-port@0 { + device_type = "pci"; + status = "disabled"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + clocks = <&gate_clk 4>; + marvell,pcie-port = <0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 16>; + }; + + pcie-port@1 { + device_type = "pci"; + status = "disabled"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + clocks = <&gate_clk 5>; + marvell,pcie-port = <1>; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 18>; }; - - pmx_gpio_4: pmx-gpio-4 { - marvell,pins = "mpp4"; - marvell,function = "gpio"; - }; - - pmx_gpio_5: pmx-gpio-5 { - marvell,pins = "mpp5"; - marvell,function = "gpio"; - }; - - pmx_gpio_6: pmx-gpio-6 { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_gpio_7: pmx-gpio-7 { - marvell,pins = "mpp7"; - marvell,function = "gpio"; - }; - - pmx_gpio_8: pmx-gpio-8 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_gpio_9: pmx-gpio-9 { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_gpio_10: pmx-gpio-10 { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_gpio_11: pmx-gpio-11 { - marvell,pins = "mpp11"; - marvell,function = "gpio"; - }; - - pmx_gpio_12: pmx-gpio-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_gpio_13: pmx-gpio-13 { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_gpio_14: pmx-gpio-14 { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_gpio_15: pmx-gpio-15 { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_gpio_16: pmx-gpio-16 { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_gpio_17: pmx-gpio-17 { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_gpio_18: pmx-gpio-18 { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - - pmx_gpio_19: pmx-gpio-19 { - marvell,pins = "mpp19"; - marvell,function = "gpio"; - }; - - pmx_gpio_20: pmx-gpio-20 { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - - pmx_gpio_21: pmx-gpio-21 { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_camera: pmx-camera { - marvell,pins = "mpp_camera"; - marvell,function = "camera"; - }; - - pmx_camera_gpio: pmx-camera-gpio { - marvell,pins = "mpp_camera"; - marvell,function = "gpio"; - }; - - pmx_sdio0: pmx-sdio0 { - marvell,pins = "mpp_sdio0"; - marvell,function = "sdio0"; - }; - - pmx_sdio0_gpio: pmx-sdio0-gpio { - marvell,pins = "mpp_sdio0"; - marvell,function = "gpio"; - }; - - pmx_sdio1: pmx-sdio1 { - marvell,pins = "mpp_sdio1"; - marvell,function = "sdio1"; - }; - - pmx_sdio1_gpio: pmx-sdio1-gpio { - marvell,pins = "mpp_sdio1"; - marvell,function = "gpio"; - }; - - pmx_audio1_gpio: pmx-audio1-gpio { - marvell,pins = "mpp_audio1"; - marvell,function = "gpio"; - }; - - pmx_spi0: pmx-spi0 { - marvell,pins = "mpp_spi0"; - marvell,function = "spi0"; - }; - - pmx_spi0_gpio: pmx-spi0-gpio { - marvell,pins = "mpp_spi0"; - marvell,function = "gpio"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp_uart1"; - marvell,function = "uart1"; - }; - - pmx_uart1_gpio: pmx-uart1-gpio { - marvell,pins = "mpp_uart1"; - marvell,function = "gpio"; - }; - - pmx_nand: pmx-nand { - marvell,pins = "mpp_nand"; - marvell,function = "nand"; - }; - - pmx_nand_gpo: pmx-nand-gpo { - marvell,pins = "mpp_nand"; - marvell,function = "gpo"; - }; - }; - - spi0: spi-ctrl@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <6>; - reg = <0x10600 0x28>; - clocks = <&core_clk 0>; - pinctrl-0 = <&pmx_spi0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - spi1: spi-ctrl@14600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <5>; - reg = <0x14600 0x28>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - i2c0: i2c-ctrl@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <11>; - clock-frequency = <400000>; - timeout-ms = <1000>; - clocks = <&core_clk 0>; - status = "disabled"; }; - ehci0: usb-host@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <24>; - clocks = <&gate_clk 0>; - status = "okay"; - }; - - ehci1: usb-host@51000 { - compatible = "marvell,orion-ehci"; - reg = <0x51000 0x1000>; - interrupts = <25>; - clocks = <&gate_clk 1>; - status = "okay"; - }; - - sdio0: sdio-host@92000 { - compatible = "marvell,dove-sdhci"; - reg = <0x92000 0x100>; - interrupts = <35>, <37>; - clocks = <&gate_clk 8>; - pinctrl-0 = <&pmx_sdio0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - sdio1: sdio-host@90000 { - compatible = "marvell,dove-sdhci"; - reg = <0x90000 0x100>; - interrupts = <36>, <38>; - clocks = <&gate_clk 9>; - pinctrl-0 = <&pmx_sdio1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - sata0: sata-host@a0000 { - compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; - interrupts = <62>; - clocks = <&gate_clk 3>; - nr-ports = <1>; - status = "disabled"; - }; - - rtc: real-time-clock@d8500 { - compatible = "marvell,orion-rtc"; - reg = <0xd8500 0x20>; - }; - - crypto: crypto-engine@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xc8000000 0x800>; - reg-names = "regs", "sram"; - interrupts = <31>; - clocks = <&gate_clk 15>; - status = "okay"; - }; - - xor0: dma-engine@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60a00 0x100>; - clocks = <&gate_clk 23>; - status = "okay"; - - channel0 { - interrupts = <39>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <40>; - dmacap,memset; - dmacap,memcpy; - dmacap,xor; - }; - }; - - xor1: dma-engine@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - clocks = <&gate_clk 24>; - status = "okay"; - - channel0 { - interrupts = <42>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <43>; - dmacap,memset; - dmacap,memcpy; - dmacap,xor; - }; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; + internal-regs { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <30>; - clocks = <&gate_clk 2>; - status = "disabled"; - - ethphy: ethernet-phy { - device-type = "ethernet-phy"; - /* set phy address in board file */ - }; - }; - - eth: ethernet-controller@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - clocks = <&gate_clk 2>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; - - ethernet-port@0 { - device_type = "network"; - compatible = "marvell,orion-eth-port"; - reg = <0>; - interrupts = <29>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - phy-handle = <ðphy>; + #size-cells = <1>; + ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000 /* MBUS regs 1M */ + 0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000 /* AXI regs 16M */ + 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ + 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ + + mbusc: mbus-ctrl@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x800100 0x8>; + }; + + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <5>; + }; + + core_clk: core-clocks@d0214 { + compatible = "marvell,dove-core-clock"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; + }; + + gate_clk: clock-gating-ctrl@d0038 { + compatible = "marvell,dove-gating-clock"; + reg = <0xd0038 0x4>; + clocks = <&core_clk 0>; + #clock-cells = <1>; + }; + + thermal: thermal-diode@d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <7>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <8>; + clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + gpio0: gpio-ctrl@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio-ctrl@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <61>; + }; + + gpio2: gpio-ctrl@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpios = <8>; + }; + + pinctrl: pin-ctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x10>; + clocks = <&gate_clk 22>; + + pmx_gpio_0: pmx-gpio-0 { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_gpio_2: pmx-gpio-2 { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_gpio_3: pmx-gpio-3 { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_gpio_4: pmx-gpio-4 { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; + + pmx_gpio_5: pmx-gpio-5 { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + pmx_gpio_6: pmx-gpio-6 { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_gpio_7: pmx-gpio-7 { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; + + pmx_gpio_8: pmx-gpio-8 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + pmx_gpio_9: pmx-gpio-9 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_gpio_10: pmx-gpio-10 { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + pmx_gpio_11: pmx-gpio-11 { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_gpio_13: pmx-gpio-13 { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_audio1_extclk: pmx-audio1-extclk { + marvell,pins = "mpp13"; + marvell,function = "audio1"; + }; + + pmx_gpio_14: pmx-gpio-14 { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_gpio_15: pmx-gpio-15 { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_gpio_16: pmx-gpio-16 { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_gpio_17: pmx-gpio-17 { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_gpio_19: pmx-gpio-19 { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_gpio_20: pmx-gpio-20 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_gpio_21: pmx-gpio-21 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_camera: pmx-camera { + marvell,pins = "mpp_camera"; + marvell,function = "camera"; + }; + + pmx_camera_gpio: pmx-camera-gpio { + marvell,pins = "mpp_camera"; + marvell,function = "gpio"; + }; + + pmx_sdio0: pmx-sdio0 { + marvell,pins = "mpp_sdio0"; + marvell,function = "sdio0"; + }; + + pmx_sdio0_gpio: pmx-sdio0-gpio { + marvell,pins = "mpp_sdio0"; + marvell,function = "gpio"; + }; + + pmx_sdio1: pmx-sdio1 { + marvell,pins = "mpp_sdio1"; + marvell,function = "sdio1"; + }; + + pmx_sdio1_gpio: pmx-sdio1-gpio { + marvell,pins = "mpp_sdio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_gpio: pmx-audio1-gpio { + marvell,pins = "mpp_audio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { + marvell,pins = "mpp_audio1"; + marvell,function = "i2s1/spdifo"; + }; + + pmx_spi0: pmx-spi0 { + marvell,pins = "mpp_spi0"; + marvell,function = "spi0"; + }; + + pmx_spi0_gpio: pmx-spi0-gpio { + marvell,pins = "mpp_spi0"; + marvell,function = "gpio"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; + + pmx_uart1_gpio: pmx-uart1-gpio { + marvell,pins = "mpp_uart1"; + marvell,function = "gpio"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp_nand"; + marvell,function = "nand"; + }; + + pmx_nand_gpo: pmx-nand-gpo { + marvell,pins = "mpp_nand"; + marvell,function = "gpo"; + }; + }; + + spi0: spi-ctrl@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; + clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_spi0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + spi1: spi-ctrl@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + i2c0: i2c-ctrl@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + ehci0: usb-host@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <24>; + clocks = <&gate_clk 0>; + status = "okay"; + }; + + ehci1: usb-host@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x1000>; + interrupts = <25>; + clocks = <&gate_clk 1>; + status = "okay"; + }; + + sdio0: sdio-host@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + clocks = <&gate_clk 8>; + pinctrl-0 = <&pmx_sdio0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sdio1: sdio-host@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + clocks = <&gate_clk 9>; + pinctrl-0 = <&pmx_sdio1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sata0: sata-host@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + clocks = <&gate_clk 3>; + nr-ports = <1>; + status = "disabled"; + }; + + rtc: real-time-clock@d8500 { + compatible = "marvell,orion-rtc"; + reg = <0xd8500 0x20>; + }; + + crypto: crypto-engine@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xffffe000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + clocks = <&gate_clk 15>; + status = "okay"; + }; + + xor0: dma-engine@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60a00 0x100>; + clocks = <&gate_clk 23>; + status = "okay"; + + channel0 { + interrupts = <39>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <40>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + xor1: dma-engine@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gate_clk 24>; + status = "okay"; + + channel0 { + interrupts = <42>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <43>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + eth: ethernet-ctrl@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; + + audio0: audio-controller@b0000 { + compatible = "marvell,dove-audio"; + reg = <0xb0000 0x2210>; + interrupts = <19>, <20>; + clocks = <&gate_clk 12>; + clock-names = "internal"; + status = "disabled"; + }; + + audio1: audio-controller@b4000 { + compatible = "marvell,dove-audio"; + reg = <0xb4000 0x2210>; + interrupts = <21>, <22>; + clocks = <&gate_clk 13>; + clock-names = "internal"; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index caadc0257342..a73eeb5f258f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -49,6 +49,12 @@ reg = <0x10000000 0x100>; }; + mipi_phy: video-phy@10020710 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10020710 8>; + #phy-cells = <1>; + }; + pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; @@ -161,6 +167,8 @@ clock-names = "csis", "sclk_csis"; bus-width = <4>; samsung,power-domain = <&pd_cam>; + phys = <&mipi_phy 0>; + phy-names = "csis"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -174,6 +182,8 @@ clock-names = "csis", "sclk_csis"; bus-width = <2>; samsung,power-domain = <&pd_cam>; + phys = <&mipi_phy 2>; + phy-names = "csis"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 382d8c7e2906..d3340db03000 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -32,13 +32,20 @@ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; - enable-active-high; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + mmc_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; }; tmu@100C0000 { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8768b03702e5..d65984c440f6 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -32,13 +32,20 @@ reg = <0x0203F000 0x1000>; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; - enable-active-high; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + mmc_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; }; pinctrl@11000000 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index cee55fa33731..684527087aa4 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -324,7 +324,14 @@ }; i2c@12C80000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; }; i2c@12C90000 { @@ -362,6 +369,17 @@ status = "disabled"; }; + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x38>; + + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; + }; + i2c@121D0000 { status = "disabled"; }; @@ -412,6 +430,10 @@ status = "disabled"; }; + i2s0: i2s@03830000 { + status = "okay"; + }; + spi_0: spi@12d20000 { status = "disabled"; }; @@ -482,13 +504,15 @@ #address-cells = <1>; #size-cells = <0>; - main_dc_reg: fixedregulator@1 { + main_dc_reg: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "MAIN_DC"; }; - mmc_reg: voltage-regulator { + mmc_reg: regulator@1 { compatible = "regulator-fixed"; + reg = <1>; regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -496,8 +520,9 @@ enable-active-high; }; - reg_hdmi_en: fixedregulator@0 { + reg_hdmi_en: regulator@2 { compatible = "regulator-fixed"; + reg = <2>; regulator-name = "hdmi-en"; }; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 2538b329f2ce..f86d56760a45 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -231,14 +231,6 @@ status = "okay"; }; - i2s1: i2s@12D60000 { - status = "disabled"; - }; - - i2s2: i2s@12D70000 { - status = "disabled"; - }; - sound { compatible = "samsung,smdk-wm8994"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index bbac42a78ce5..9db5047812f3 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -422,6 +422,7 @@ i2s0: i2s@03830000 { compatible = "samsung,s5pv210-i2s"; + status = "disabled"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 @@ -438,6 +439,7 @@ i2s1: i2s@12D60000 { compatible = "samsung,s3c6410-i2s"; + status = "disabled"; reg = <0x12D60000 0x100>; dmas = <&pdma1 12 &pdma1 11>; @@ -450,6 +452,7 @@ i2s2: i2s@12D70000 { compatible = "samsung,s3c6410-i2s"; + status = "disabled"; reg = <0x12D70000 0x100>; dmas = <&pdma0 12 &pdma0 11>; @@ -615,16 +618,18 @@ compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; - clocks = <&clock 333>, <&clock 136>, <&clock 137>, - <&clock 333>, <&clock 333>; + clocks = <&clock 344>, <&clock 136>, <&clock 137>, + <&clock 159>, <&clock 1024>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", - "sclk_hdmiphy", "hdmiphy"; + "sclk_hdmiphy", "mout_hdmi"; }; mixer { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; + clocks = <&clock 343>, <&clock 136>; + clock-names = "mixer", "sclk_hdmi"; }; dp_phy: video-phy@10040720 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25ba7c2..79524c74c603 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -61,4 +61,30 @@ }; }; + pinctrl@13400000 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + }; + + hdmi@14530000 { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + }; + + i2c_2: i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index d537cd704e19..09aa06cb3d3a 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -27,6 +27,10 @@ pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; pinctrl4 = &pinctrl_4; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; }; cpus { @@ -235,4 +239,75 @@ io-channel-ranges; status = "disabled"; }; + + i2c_0: i2c@12C60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 261>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@12C70000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 262>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@12C80000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 263>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@12C90000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 264>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + hdmi@14530000 { + compatible = "samsung,exynos4212-hdmi"; + reg = <0x14530000 0x70000>; + interrupts = <0 95 0>; + clocks = <&clock 413>, <&clock 143>, <&clock 768>, + <&clock 158>, <&clock 640>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; + status = "disabled"; + }; + + mixer@14450000 { + compatible = "samsung,exynos5420-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + clocks = <&clock 431>, <&clock 143>; + clock-names = "mixer", "sclk_hdmi"; + }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 185c7c01102a..1f026adefd45 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx23.dtsi" +#include "imx23.dtsi" / { model = "Freescale i.MX23 Evaluation Kit"; @@ -45,14 +45,14 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ - 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ - 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + MX23_PAD_LCD_RESET__GPIO_1_18 + MX23_PAD_PWM3__GPIO_1_29 + MX23_PAD_PWM4__GPIO_1_30 + MX23_PAD_SSP1_DETECT__SSP1_DETECT >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index fc766ae12e24..526bfdbd87f9 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "imx23.dtsi" +#include "imx23.dtsi" / { model = "i.MX23 Olinuxino Low Cost Board"; @@ -40,21 +40,21 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + MX23_PAD_GPMI_ALE__GPIO_0_17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; led_pin_gpio2_1: led_gpio2_1@0 { reg = <0>; fsl,pinmux-ids = < - 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + MX23_PAD_SSP1_DETECT__GPIO_2_1 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h new file mode 100644 index 000000000000..5c0f32ca3a93 --- /dev/null +++ b/arch/arm/boot/dts/imx23-pinfunc.h @@ -0,0 +1,333 @@ +/* + * Header providing constants for i.MX23 pinctrl bindings. + * + * Copyright (C) 2013 Lothar Waßmann <[email protected]> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DT_BINDINGS_MX23_PINCTRL_H__ +#define __DT_BINDINGS_MX23_PINCTRL_H__ + +#include "mxs-pinfunc.h" + +#define MX23_PAD_GPMI_D00__GPMI_D00 0x0000 +#define MX23_PAD_GPMI_D01__GPMI_D01 0x0010 +#define MX23_PAD_GPMI_D02__GPMI_D02 0x0020 +#define MX23_PAD_GPMI_D03__GPMI_D03 0x0030 +#define MX23_PAD_GPMI_D04__GPMI_D04 0x0040 +#define MX23_PAD_GPMI_D05__GPMI_D05 0x0050 +#define MX23_PAD_GPMI_D06__GPMI_D06 0x0060 +#define MX23_PAD_GPMI_D07__GPMI_D07 0x0070 +#define MX23_PAD_GPMI_D08__GPMI_D08 0x0080 +#define MX23_PAD_GPMI_D09__GPMI_D09 0x0090 +#define MX23_PAD_GPMI_D10__GPMI_D10 0x00a0 +#define MX23_PAD_GPMI_D11__GPMI_D11 0x00b0 +#define MX23_PAD_GPMI_D12__GPMI_D12 0x00c0 +#define MX23_PAD_GPMI_D13__GPMI_D13 0x00d0 +#define MX23_PAD_GPMI_D14__GPMI_D14 0x00e0 +#define MX23_PAD_GPMI_D15__GPMI_D15 0x00f0 +#define MX23_PAD_GPMI_CLE__GPMI_CLE 0x0100 +#define MX23_PAD_GPMI_ALE__GPMI_ALE 0x0110 +#define MX23_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 +#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 0x0130 +#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 0x0140 +#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 0x0150 +#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 0x0160 +#define MX23_PAD_GPMI_WPN__GPMI_WPN 0x0170 +#define MX23_PAD_GPMI_WRN__GPMI_WRN 0x0180 +#define MX23_PAD_GPMI_RDN__GPMI_RDN 0x0190 +#define MX23_PAD_AUART1_CTS__AUART1_CTS 0x01a0 +#define MX23_PAD_AUART1_RTS__AUART1_RTS 0x01b0 +#define MX23_PAD_AUART1_RX__AUART1_RX 0x01c0 +#define MX23_PAD_AUART1_TX__AUART1_TX 0x01d0 +#define MX23_PAD_I2C_SCL__I2C_SCL 0x01e0 +#define MX23_PAD_I2C_SDA__I2C_SDA 0x01f0 +#define MX23_PAD_LCD_D00__LCD_D00 0x1000 +#define MX23_PAD_LCD_D01__LCD_D01 0x1010 +#define MX23_PAD_LCD_D02__LCD_D02 0x1020 +#define MX23_PAD_LCD_D03__LCD_D03 0x1030 +#define MX23_PAD_LCD_D04__LCD_D04 0x1040 +#define MX23_PAD_LCD_D05__LCD_D05 0x1050 +#define MX23_PAD_LCD_D06__LCD_D06 0x1060 +#define MX23_PAD_LCD_D07__LCD_D07 0x1070 +#define MX23_PAD_LCD_D08__LCD_D08 0x1080 +#define MX23_PAD_LCD_D09__LCD_D09 0x1090 +#define MX23_PAD_LCD_D10__LCD_D10 0x10a0 +#define MX23_PAD_LCD_D11__LCD_D11 0x10b0 +#define MX23_PAD_LCD_D12__LCD_D12 0x10c0 +#define MX23_PAD_LCD_D13__LCD_D13 0x10d0 +#define MX23_PAD_LCD_D14__LCD_D14 0x10e0 +#define MX23_PAD_LCD_D15__LCD_D15 0x10f0 +#define MX23_PAD_LCD_D16__LCD_D16 0x1100 +#define MX23_PAD_LCD_D17__LCD_D17 0x1110 +#define MX23_PAD_LCD_RESET__LCD_RESET 0x1120 +#define MX23_PAD_LCD_RS__LCD_RS 0x1130 +#define MX23_PAD_LCD_WR__LCD_WR 0x1140 +#define MX23_PAD_LCD_CS__LCD_CS 0x1150 +#define MX23_PAD_LCD_DOTCK__LCD_DOTCK 0x1160 +#define MX23_PAD_LCD_ENABLE__LCD_ENABLE 0x1170 +#define MX23_PAD_LCD_HSYNC__LCD_HSYNC 0x1180 +#define MX23_PAD_LCD_VSYNC__LCD_VSYNC 0x1190 +#define MX23_PAD_PWM0__PWM0 0x11a0 +#define MX23_PAD_PWM1__PWM1 0x11b0 +#define MX23_PAD_PWM2__PWM2 0x11c0 +#define MX23_PAD_PWM3__PWM3 0x11d0 +#define MX23_PAD_PWM4__PWM4 0x11e0 +#define MX23_PAD_SSP1_CMD__SSP1_CMD 0x2000 +#define MX23_PAD_SSP1_DETECT__SSP1_DETECT 0x2010 +#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 0x2020 +#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 0x2030 +#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 0x2040 +#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 0x2050 +#define MX23_PAD_SSP1_SCK__SSP1_SCK 0x2060 +#define MX23_PAD_ROTARYA__ROTARYA 0x2070 +#define MX23_PAD_ROTARYB__ROTARYB 0x2080 +#define MX23_PAD_EMI_A00__EMI_A00 0x2090 +#define MX23_PAD_EMI_A01__EMI_A01 0x20a0 +#define MX23_PAD_EMI_A02__EMI_A02 0x20b0 +#define MX23_PAD_EMI_A03__EMI_A03 0x20c0 +#define MX23_PAD_EMI_A04__EMI_A04 0x20d0 +#define MX23_PAD_EMI_A05__EMI_A05 0x20e0 +#define MX23_PAD_EMI_A06__EMI_A06 0x20f0 +#define MX23_PAD_EMI_A07__EMI_A07 0x2100 +#define MX23_PAD_EMI_A08__EMI_A08 0x2110 +#define MX23_PAD_EMI_A09__EMI_A09 0x2120 +#define MX23_PAD_EMI_A10__EMI_A10 0x2130 +#define MX23_PAD_EMI_A11__EMI_A11 0x2140 +#define MX23_PAD_EMI_A12__EMI_A12 0x2150 +#define MX23_PAD_EMI_BA0__EMI_BA0 0x2160 +#define MX23_PAD_EMI_BA1__EMI_BA1 0x2170 +#define MX23_PAD_EMI_CASN__EMI_CASN 0x2180 +#define MX23_PAD_EMI_CE0N__EMI_CE0N 0x2190 +#define MX23_PAD_EMI_CE1N__EMI_CE1N 0x21a0 +#define MX23_PAD_GPMI_CE1N__GPMI_CE1N 0x21b0 +#define MX23_PAD_GPMI_CE0N__GPMI_CE0N 0x21c0 +#define MX23_PAD_EMI_CKE__EMI_CKE 0x21d0 +#define MX23_PAD_EMI_RASN__EMI_RASN 0x21e0 +#define MX23_PAD_EMI_WEN__EMI_WEN 0x21f0 +#define MX23_PAD_EMI_D00__EMI_D00 0x3000 +#define MX23_PAD_EMI_D01__EMI_D01 0x3010 +#define MX23_PAD_EMI_D02__EMI_D02 0x3020 +#define MX23_PAD_EMI_D03__EMI_D03 0x3030 +#define MX23_PAD_EMI_D04__EMI_D04 0x3040 +#define MX23_PAD_EMI_D05__EMI_D05 0x3050 +#define MX23_PAD_EMI_D06__EMI_D06 0x3060 +#define MX23_PAD_EMI_D07__EMI_D07 0x3070 +#define MX23_PAD_EMI_D08__EMI_D08 0x3080 +#define MX23_PAD_EMI_D09__EMI_D09 0x3090 +#define MX23_PAD_EMI_D10__EMI_D10 0x30a0 +#define MX23_PAD_EMI_D11__EMI_D11 0x30b0 +#define MX23_PAD_EMI_D12__EMI_D12 0x30c0 +#define MX23_PAD_EMI_D13__EMI_D13 0x30d0 +#define MX23_PAD_EMI_D14__EMI_D14 0x30e0 +#define MX23_PAD_EMI_D15__EMI_D15 0x30f0 +#define MX23_PAD_EMI_DQM0__EMI_DQM0 0x3100 +#define MX23_PAD_EMI_DQM1__EMI_DQM1 0x3110 +#define MX23_PAD_EMI_DQS0__EMI_DQS0 0x3120 +#define MX23_PAD_EMI_DQS1__EMI_DQS1 0x3130 +#define MX23_PAD_EMI_CLK__EMI_CLK 0x3140 +#define MX23_PAD_EMI_CLKN__EMI_CLKN 0x3150 +#define MX23_PAD_GPMI_D00__LCD_D8 0x0001 +#define MX23_PAD_GPMI_D01__LCD_D9 0x0011 +#define MX23_PAD_GPMI_D02__LCD_D10 0x0021 +#define MX23_PAD_GPMI_D03__LCD_D11 0x0031 +#define MX23_PAD_GPMI_D04__LCD_D12 0x0041 +#define MX23_PAD_GPMI_D05__LCD_D13 0x0051 +#define MX23_PAD_GPMI_D06__LCD_D14 0x0061 +#define MX23_PAD_GPMI_D07__LCD_D15 0x0071 +#define MX23_PAD_GPMI_D08__LCD_D18 0x0081 +#define MX23_PAD_GPMI_D09__LCD_D19 0x0091 +#define MX23_PAD_GPMI_D10__LCD_D20 0x00a1 +#define MX23_PAD_GPMI_D11__LCD_D21 0x00b1 +#define MX23_PAD_GPMI_D12__LCD_D22 0x00c1 +#define MX23_PAD_GPMI_D13__LCD_D23 0x00d1 +#define MX23_PAD_GPMI_D14__AUART2_RX 0x00e1 +#define MX23_PAD_GPMI_D15__AUART2_TX 0x00f1 +#define MX23_PAD_GPMI_CLE__LCD_D16 0x0101 +#define MX23_PAD_GPMI_ALE__LCD_D17 0x0111 +#define MX23_PAD_GPMI_CE2N__ATA_A2 0x0121 +#define MX23_PAD_AUART1_RTS__IR_CLK 0x01b1 +#define MX23_PAD_AUART1_RX__IR_RX 0x01c1 +#define MX23_PAD_AUART1_TX__IR_TX 0x01d1 +#define MX23_PAD_I2C_SCL__GPMI_RDY2 0x01e1 +#define MX23_PAD_I2C_SDA__GPMI_CE2N 0x01f1 +#define MX23_PAD_LCD_D00__ETM_DA8 0x1001 +#define MX23_PAD_LCD_D01__ETM_DA9 0x1011 +#define MX23_PAD_LCD_D02__ETM_DA10 0x1021 +#define MX23_PAD_LCD_D03__ETM_DA11 0x1031 +#define MX23_PAD_LCD_D04__ETM_DA12 0x1041 +#define MX23_PAD_LCD_D05__ETM_DA13 0x1051 +#define MX23_PAD_LCD_D06__ETM_DA14 0x1061 +#define MX23_PAD_LCD_D07__ETM_DA15 0x1071 +#define MX23_PAD_LCD_D08__ETM_DA0 0x1081 +#define MX23_PAD_LCD_D09__ETM_DA1 0x1091 +#define MX23_PAD_LCD_D10__ETM_DA2 0x10a1 +#define MX23_PAD_LCD_D11__ETM_DA3 0x10b1 +#define MX23_PAD_LCD_D12__ETM_DA4 0x10c1 +#define MX23_PAD_LCD_D13__ETM_DA5 0x10d1 +#define MX23_PAD_LCD_D14__ETM_DA6 0x10e1 +#define MX23_PAD_LCD_D15__ETM_DA7 0x10f1 +#define MX23_PAD_LCD_RESET__ETM_TCTL 0x1121 +#define MX23_PAD_LCD_RS__ETM_TCLK 0x1131 +#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 0x1161 +#define MX23_PAD_LCD_ENABLE__I2C_SCL 0x1171 +#define MX23_PAD_LCD_HSYNC__I2C_SDA 0x1181 +#define MX23_PAD_LCD_VSYNC__LCD_BUSY 0x1191 +#define MX23_PAD_PWM0__ROTARYA 0x11a1 +#define MX23_PAD_PWM1__ROTARYB 0x11b1 +#define MX23_PAD_PWM2__GPMI_RDY3 0x11c1 +#define MX23_PAD_PWM3__ETM_TCTL 0x11d1 +#define MX23_PAD_PWM4__ETM_TCLK 0x11e1 +#define MX23_PAD_SSP1_DETECT__GPMI_CE3N 0x2011 +#define MX23_PAD_SSP1_DATA1__I2C_SCL 0x2031 +#define MX23_PAD_SSP1_DATA2__I2C_SDA 0x2041 +#define MX23_PAD_ROTARYA__AUART2_RTS 0x2071 +#define MX23_PAD_ROTARYB__AUART2_CTS 0x2081 +#define MX23_PAD_GPMI_D00__SSP2_DATA0 0x0002 +#define MX23_PAD_GPMI_D01__SSP2_DATA1 0x0012 +#define MX23_PAD_GPMI_D02__SSP2_DATA2 0x0022 +#define MX23_PAD_GPMI_D03__SSP2_DATA3 0x0032 +#define MX23_PAD_GPMI_D04__SSP2_DATA4 0x0042 +#define MX23_PAD_GPMI_D05__SSP2_DATA5 0x0052 +#define MX23_PAD_GPMI_D06__SSP2_DATA6 0x0062 +#define MX23_PAD_GPMI_D07__SSP2_DATA7 0x0072 +#define MX23_PAD_GPMI_D08__SSP1_DATA4 0x0082 +#define MX23_PAD_GPMI_D09__SSP1_DATA5 0x0092 +#define MX23_PAD_GPMI_D10__SSP1_DATA6 0x00a2 +#define MX23_PAD_GPMI_D11__SSP1_DATA7 0x00b2 +#define MX23_PAD_GPMI_D15__GPMI_CE3N 0x00f2 +#define MX23_PAD_GPMI_RDY0__SSP2_DETECT 0x0132 +#define MX23_PAD_GPMI_RDY1__SSP2_CMD 0x0142 +#define MX23_PAD_GPMI_WRN__SSP2_SCK 0x0182 +#define MX23_PAD_AUART1_CTS__SSP1_DATA4 0x01a2 +#define MX23_PAD_AUART1_RTS__SSP1_DATA5 0x01b2 +#define MX23_PAD_AUART1_RX__SSP1_DATA6 0x01c2 +#define MX23_PAD_AUART1_TX__SSP1_DATA7 0x01d2 +#define MX23_PAD_I2C_SCL__AUART1_TX 0x01e2 +#define MX23_PAD_I2C_SDA__AUART1_RX 0x01f2 +#define MX23_PAD_LCD_D08__SAIF2_SDATA0 0x1082 +#define MX23_PAD_LCD_D09__SAIF1_SDATA0 0x1092 +#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK 0x10a2 +#define MX23_PAD_LCD_D11__SAIF_LRCLK 0x10b2 +#define MX23_PAD_LCD_D12__SAIF2_SDATA1 0x10c2 +#define MX23_PAD_LCD_D13__SAIF2_SDATA2 0x10d2 +#define MX23_PAD_LCD_D14__SAIF1_SDATA2 0x10e2 +#define MX23_PAD_LCD_D15__SAIF1_SDATA1 0x10f2 +#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK 0x1102 +#define MX23_PAD_LCD_RESET__GPMI_CE3N 0x1122 +#define MX23_PAD_PWM0__DUART_RX 0x11a2 +#define MX23_PAD_PWM1__DUART_TX 0x11b2 +#define MX23_PAD_PWM3__AUART1_CTS 0x11d2 +#define MX23_PAD_PWM4__AUART1_RTS 0x11e2 +#define MX23_PAD_SSP1_CMD__JTAG_TDO 0x2002 +#define MX23_PAD_SSP1_DETECT__USB_OTG_ID 0x2012 +#define MX23_PAD_SSP1_DATA0__JTAG_TDI 0x2022 +#define MX23_PAD_SSP1_DATA1__JTAG_TCLK 0x2032 +#define MX23_PAD_SSP1_DATA2__JTAG_RTCK 0x2042 +#define MX23_PAD_SSP1_DATA3__JTAG_TMS 0x2052 +#define MX23_PAD_SSP1_SCK__JTAG_TRST 0x2062 +#define MX23_PAD_ROTARYA__SPDIF 0x2072 +#define MX23_PAD_ROTARYB__GPMI_CE3N 0x2082 +#define MX23_PAD_GPMI_D00__GPIO_0_0 0x0003 +#define MX23_PAD_GPMI_D01__GPIO_0_1 0x0013 +#define MX23_PAD_GPMI_D02__GPIO_0_2 0x0023 +#define MX23_PAD_GPMI_D03__GPIO_0_3 0x0033 +#define MX23_PAD_GPMI_D04__GPIO_0_4 0x0043 +#define MX23_PAD_GPMI_D05__GPIO_0_5 0x0053 +#define MX23_PAD_GPMI_D06__GPIO_0_6 0x0063 +#define MX23_PAD_GPMI_D07__GPIO_0_7 0x0073 +#define MX23_PAD_GPMI_D08__GPIO_0_8 0x0083 +#define MX23_PAD_GPMI_D09__GPIO_0_9 0x0093 +#define MX23_PAD_GPMI_D10__GPIO_0_10 0x00a3 +#define MX23_PAD_GPMI_D11__GPIO_0_11 0x00b3 +#define MX23_PAD_GPMI_D12__GPIO_0_12 0x00c3 +#define MX23_PAD_GPMI_D13__GPIO_0_13 0x00d3 +#define MX23_PAD_GPMI_D14__GPIO_0_14 0x00e3 +#define MX23_PAD_GPMI_D15__GPIO_0_15 0x00f3 +#define MX23_PAD_GPMI_CLE__GPIO_0_16 0x0103 +#define MX23_PAD_GPMI_ALE__GPIO_0_17 0x0113 +#define MX23_PAD_GPMI_CE2N__GPIO_0_18 0x0123 +#define MX23_PAD_GPMI_RDY0__GPIO_0_19 0x0133 +#define MX23_PAD_GPMI_RDY1__GPIO_0_20 0x0143 +#define MX23_PAD_GPMI_RDY2__GPIO_0_21 0x0153 +#define MX23_PAD_GPMI_RDY3__GPIO_0_22 0x0163 +#define MX23_PAD_GPMI_WPN__GPIO_0_23 0x0173 +#define MX23_PAD_GPMI_WRN__GPIO_0_24 0x0183 +#define MX23_PAD_GPMI_RDN__GPIO_0_25 0x0193 +#define MX23_PAD_AUART1_CTS__GPIO_0_26 0x01a3 +#define MX23_PAD_AUART1_RTS__GPIO_0_27 0x01b3 +#define MX23_PAD_AUART1_RX__GPIO_0_28 0x01c3 +#define MX23_PAD_AUART1_TX__GPIO_0_29 0x01d3 +#define MX23_PAD_I2C_SCL__GPIO_0_30 0x01e3 +#define MX23_PAD_I2C_SDA__GPIO_0_31 0x01f3 +#define MX23_PAD_LCD_D00__GPIO_1_0 0x1003 +#define MX23_PAD_LCD_D01__GPIO_1_1 0x1013 +#define MX23_PAD_LCD_D02__GPIO_1_2 0x1023 +#define MX23_PAD_LCD_D03__GPIO_1_3 0x1033 +#define MX23_PAD_LCD_D04__GPIO_1_4 0x1043 +#define MX23_PAD_LCD_D05__GPIO_1_5 0x1053 +#define MX23_PAD_LCD_D06__GPIO_1_6 0x1063 +#define MX23_PAD_LCD_D07__GPIO_1_7 0x1073 +#define MX23_PAD_LCD_D08__GPIO_1_8 0x1083 +#define MX23_PAD_LCD_D09__GPIO_1_9 0x1093 +#define MX23_PAD_LCD_D10__GPIO_1_10 0x10a3 +#define MX23_PAD_LCD_D11__GPIO_1_11 0x10b3 +#define MX23_PAD_LCD_D12__GPIO_1_12 0x10c3 +#define MX23_PAD_LCD_D13__GPIO_1_13 0x10d3 +#define MX23_PAD_LCD_D14__GPIO_1_14 0x10e3 +#define MX23_PAD_LCD_D15__GPIO_1_15 0x10f3 +#define MX23_PAD_LCD_D16__GPIO_1_16 0x1103 +#define MX23_PAD_LCD_D17__GPIO_1_17 0x1113 +#define MX23_PAD_LCD_RESET__GPIO_1_18 0x1123 +#define MX23_PAD_LCD_RS__GPIO_1_19 0x1133 +#define MX23_PAD_LCD_WR__GPIO_1_20 0x1143 +#define MX23_PAD_LCD_CS__GPIO_1_21 0x1153 +#define MX23_PAD_LCD_DOTCK__GPIO_1_22 0x1163 +#define MX23_PAD_LCD_ENABLE__GPIO_1_23 0x1173 +#define MX23_PAD_LCD_HSYNC__GPIO_1_24 0x1183 +#define MX23_PAD_LCD_VSYNC__GPIO_1_25 0x1193 +#define MX23_PAD_PWM0__GPIO_1_26 0x11a3 +#define MX23_PAD_PWM1__GPIO_1_27 0x11b3 +#define MX23_PAD_PWM2__GPIO_1_28 0x11c3 +#define MX23_PAD_PWM3__GPIO_1_29 0x11d3 +#define MX23_PAD_PWM4__GPIO_1_30 0x11e3 +#define MX23_PAD_SSP1_CMD__GPIO_2_0 0x2003 +#define MX23_PAD_SSP1_DETECT__GPIO_2_1 0x2013 +#define MX23_PAD_SSP1_DATA0__GPIO_2_2 0x2023 +#define MX23_PAD_SSP1_DATA1__GPIO_2_3 0x2033 +#define MX23_PAD_SSP1_DATA2__GPIO_2_4 0x2043 +#define MX23_PAD_SSP1_DATA3__GPIO_2_5 0x2053 +#define MX23_PAD_SSP1_SCK__GPIO_2_6 0x2063 +#define MX23_PAD_ROTARYA__GPIO_2_7 0x2073 +#define MX23_PAD_ROTARYB__GPIO_2_8 0x2083 +#define MX23_PAD_EMI_A00__GPIO_2_9 0x2093 +#define MX23_PAD_EMI_A01__GPIO_2_10 0x20a3 +#define MX23_PAD_EMI_A02__GPIO_2_11 0x20b3 +#define MX23_PAD_EMI_A03__GPIO_2_12 0x20c3 +#define MX23_PAD_EMI_A04__GPIO_2_13 0x20d3 +#define MX23_PAD_EMI_A05__GPIO_2_14 0x20e3 +#define MX23_PAD_EMI_A06__GPIO_2_15 0x20f3 +#define MX23_PAD_EMI_A07__GPIO_2_16 0x2103 +#define MX23_PAD_EMI_A08__GPIO_2_17 0x2113 +#define MX23_PAD_EMI_A09__GPIO_2_18 0x2123 +#define MX23_PAD_EMI_A10__GPIO_2_19 0x2133 +#define MX23_PAD_EMI_A11__GPIO_2_20 0x2143 +#define MX23_PAD_EMI_A12__GPIO_2_21 0x2153 +#define MX23_PAD_EMI_BA0__GPIO_2_22 0x2163 +#define MX23_PAD_EMI_BA1__GPIO_2_23 0x2173 +#define MX23_PAD_EMI_CASN__GPIO_2_24 0x2183 +#define MX23_PAD_EMI_CE0N__GPIO_2_25 0x2193 +#define MX23_PAD_EMI_CE1N__GPIO_2_26 0x21a3 +#define MX23_PAD_GPMI_CE1N__GPIO_2_27 0x21b3 +#define MX23_PAD_GPMI_CE0N__GPIO_2_28 0x21c3 +#define MX23_PAD_EMI_CKE__GPIO_2_29 0x21d3 +#define MX23_PAD_EMI_RASN__GPIO_2_30 0x21e3 +#define MX23_PAD_EMI_WEN__GPIO_2_31 0x21f3 + +#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 85c3864b6a56..cb64e2b191ea 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx23.dtsi" +#include "imx23.dtsi" / { model = "Freescale STMP378x Development Board"; @@ -39,12 +39,12 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ - 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + MX23_PAD_PWM3__GPIO_1_29 + MX23_PAD_PWM4__GPIO_1_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 28b5ce289662..87faa6e8b6e7 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -9,7 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx23-pinfunc.h" / { interrupt-parent = <&icoll>; @@ -137,174 +138,174 @@ duart_pins_a: duart@0 { reg = <0>; fsl,pinmux-ids = < - 0x11a2 /* MX23_PAD_PWM0__DUART_RX */ - 0x11b2 /* MX23_PAD_PWM1__DUART_TX */ + MX23_PAD_PWM0__DUART_RX + MX23_PAD_PWM1__DUART_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart0_pins_a: auart0@0 { reg = <0>; fsl,pinmux-ids = < - 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */ - 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */ - 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */ - 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */ + MX23_PAD_AUART1_RX__AUART1_RX + MX23_PAD_AUART1_TX__AUART1_TX + MX23_PAD_AUART1_CTS__AUART1_CTS + MX23_PAD_AUART1_RTS__AUART1_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart0_2pins_a: auart0-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */ - 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */ + MX23_PAD_I2C_SCL__AUART1_TX + MX23_PAD_I2C_SDA__AUART1_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < - 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */ - 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */ - 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */ - 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */ - 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */ - 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */ - 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */ - 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */ - 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */ - 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */ - 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */ - 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */ - 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ - 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ - 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ - 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */ - 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */ + MX23_PAD_GPMI_D00__GPMI_D00 + MX23_PAD_GPMI_D01__GPMI_D01 + MX23_PAD_GPMI_D02__GPMI_D02 + MX23_PAD_GPMI_D03__GPMI_D03 + MX23_PAD_GPMI_D04__GPMI_D04 + MX23_PAD_GPMI_D05__GPMI_D05 + MX23_PAD_GPMI_D06__GPMI_D06 + MX23_PAD_GPMI_D07__GPMI_D07 + MX23_PAD_GPMI_CLE__GPMI_CLE + MX23_PAD_GPMI_ALE__GPMI_ALE + MX23_PAD_GPMI_RDY0__GPMI_RDY0 + MX23_PAD_GPMI_RDY1__GPMI_RDY1 + MX23_PAD_GPMI_WPN__GPMI_WPN + MX23_PAD_GPMI_WRN__GPMI_WRN + MX23_PAD_GPMI_RDN__GPMI_RDN + MX23_PAD_GPMI_CE1N__GPMI_CE1N + MX23_PAD_GPMI_CE0N__GPMI_CE0N >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_fixup: gpmi-pins-fixup { fsl,pinmux-ids = < - 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ - 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ - 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + MX23_PAD_GPMI_WPN__GPMI_WPN + MX23_PAD_GPMI_WRN__GPMI_WRN + MX23_PAD_GPMI_RDN__GPMI_RDN >; - fsl,drive-strength = <2>; + fsl,drive-strength = <MXS_DRIVE_12mA>; }; mmc0_4bit_pins_a: mmc0-4bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ - 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ - 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ - 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ - 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ - 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + MX23_PAD_SSP1_DATA0__SSP1_DATA0 + MX23_PAD_SSP1_DATA1__SSP1_DATA1 + MX23_PAD_SSP1_DATA2__SSP1_DATA2 + MX23_PAD_SSP1_DATA3__SSP1_DATA3 + MX23_PAD_SSP1_CMD__SSP1_CMD + MX23_PAD_SSP1_SCK__SSP1_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ - 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ - 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ - 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ - 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */ - 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */ - 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */ - 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */ - 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ - 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + MX23_PAD_SSP1_DATA0__SSP1_DATA0 + MX23_PAD_SSP1_DATA1__SSP1_DATA1 + MX23_PAD_SSP1_DATA2__SSP1_DATA2 + MX23_PAD_SSP1_DATA3__SSP1_DATA3 + MX23_PAD_GPMI_D08__SSP1_DATA4 + MX23_PAD_GPMI_D09__SSP1_DATA5 + MX23_PAD_GPMI_D10__SSP1_DATA6 + MX23_PAD_GPMI_D11__SSP1_DATA7 + MX23_PAD_SSP1_CMD__SSP1_CMD + MX23_PAD_SSP1_DETECT__SSP1_DETECT + MX23_PAD_SSP1_SCK__SSP1_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_pins_fixup: mmc0-pins-fixup { fsl,pinmux-ids = < - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ - 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + MX23_PAD_SSP1_DETECT__SSP1_DETECT + MX23_PAD_SSP1_SCK__SSP1_SCK >; - fsl,pull-up = <0>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < - 0x11c0 /* MX23_PAD_PWM2__PWM2 */ + MX23_PAD_PWM2__PWM2 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */ - 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */ - 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */ - 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */ - 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */ - 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */ - 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */ - 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */ - 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */ - 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */ - 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */ + MX23_PAD_LCD_D00__LCD_D00 + MX23_PAD_LCD_D01__LCD_D01 + MX23_PAD_LCD_D02__LCD_D02 + MX23_PAD_LCD_D03__LCD_D03 + MX23_PAD_LCD_D04__LCD_D04 + MX23_PAD_LCD_D05__LCD_D05 + MX23_PAD_LCD_D06__LCD_D06 + MX23_PAD_LCD_D07__LCD_D07 + MX23_PAD_LCD_D08__LCD_D08 + MX23_PAD_LCD_D09__LCD_D09 + MX23_PAD_LCD_D10__LCD_D10 + MX23_PAD_LCD_D11__LCD_D11 + MX23_PAD_LCD_D12__LCD_D12 + MX23_PAD_LCD_D13__LCD_D13 + MX23_PAD_LCD_D14__LCD_D14 + MX23_PAD_LCD_D15__LCD_D15 + MX23_PAD_LCD_D16__LCD_D16 + MX23_PAD_LCD_D17__LCD_D17 + MX23_PAD_GPMI_D08__LCD_D18 + MX23_PAD_GPMI_D09__LCD_D19 + MX23_PAD_GPMI_D10__LCD_D20 + MX23_PAD_GPMI_D11__LCD_D21 + MX23_PAD_GPMI_D12__LCD_D22 + MX23_PAD_GPMI_D13__LCD_D23 + MX23_PAD_LCD_DOTCK__LCD_DOTCK + MX23_PAD_LCD_ENABLE__LCD_ENABLE + MX23_PAD_LCD_HSYNC__LCD_HSYNC + MX23_PAD_LCD_VSYNC__LCD_VSYNC >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; spi2_pins_a: spi2@0 { reg = <0>; fsl,pinmux-ids = < - 0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */ - 0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */ - 0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */ - 0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */ + MX23_PAD_GPMI_WRN__SSP2_SCK + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D03__SSP2_DATA3 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 2a377ca1881a..47c8c26012e4 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -16,6 +16,26 @@ model = "Armadeus Systems APF27Dev docking/development board"; compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27"; + display: display { + model = "Chimei-LW700AT9003"; + native-mode = <&timing0>; + bits-per-pixel = <16>; /* non-standard but required */ + fsl,pcr = <0xfae80083>; /* non-standard but required */ + display-timings { + timing0: 640x480 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <640>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -50,6 +70,12 @@ status = "okay"; }; +&fb { + display = <&display>; + fsl,dmacr = <0x00020010>; + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b7a1c6d950b9..826231eb4446 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -123,6 +123,7 @@ }; pwm: pwm@10006000 { + #pwm-cells = <2>; compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 7eb075876c4c..7198fe3798c6 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Armadeus Systems APF28 module"; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index b602494c152b..e2efd8d89c4f 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -10,7 +10,7 @@ */ /* APF28Dev is a docking board for the APF28 SOM */ -/include/ "imx28-apf28.dts" +#include "imx28-apf28.dts" / { model = "Armadeus Systems APF28Dev docking/development board"; @@ -41,30 +41,30 @@ hog_pins_apf28dev: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */ - 0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */ - 0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */ - 0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */ - 0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */ - 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ - 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + MX28_PAD_LCD_D16__GPIO_1_16 + MX28_PAD_LCD_D17__GPIO_1_17 + MX28_PAD_LCD_D18__GPIO_1_18 + MX28_PAD_LCD_D19__GPIO_1_19 + MX28_PAD_LCD_D20__GPIO_1_20 + MX28_PAD_LCD_D21__GPIO_1_21 + MX28_PAD_LCD_D22__GPIO_1_22 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_apf28dev: lcdif-apf28dev@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 0e7fed47bd8d..6f254ca816cb 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -1,5 +1,5 @@ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Bluegiga APX4 Development Kit"; @@ -40,53 +40,53 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ - 0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */ - 0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */ - 0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */ - 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */ + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_JTAG_RTCK__GPIO_4_20 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_apx4: lcdif-apx4@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { reg = <0>; fsl,pinmux-ids = < - 0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */ - 0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */ - 0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */ - 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ - 0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */ - 0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */ + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_SSP0_DATA7__SSP2_SCK + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { fsl,pinmux-ids = < - 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + MX28_PAD_SSP0_DATA7__SSP2_SCK >; - fsl,drive-strength = <2>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 1ec8c94bbac9..cabb6171a19d 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Crystalfontz CFA-10036 Board"; @@ -26,31 +26,31 @@ ssd1306_cfa10036: ssd1306-10036@0 { reg = <0>; fsl,pinmux-ids = < - 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */ + MX28_PAD_SSP0_DATA7__GPIO_2_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; led_pins_cfa10036: leds-10036@0 { reg = <0>; fsl,pinmux-ids = < - 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */ + MX28_PAD_AUART1_RX__GPIO_3_4 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usb0_otg_cfa10036: otg-10036@0 { reg = <0>; fsl,pinmux-ids = < - 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */ + MX28_PAD_GPMI_RDY0__USB0_ID >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index 182b99fe35f3..f93e9a700e52 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -13,7 +13,7 @@ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10037 Board"; @@ -25,21 +25,21 @@ usb_pins_cfa10037: usb-10037@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mac0_pins_cfa10037: mac0-10037@0 { reg = <0>; fsl,pinmux-ids = < - 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + MX28_PAD_SSP2_SS2__GPIO_2_21 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 06e4cfaf7dd2..7087b4bf6a8f 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -13,7 +13,7 @@ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10049 Board"; @@ -25,150 +25,150 @@ usb_pins_cfa10049: usb-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; i2cmux_pins_cfa10049: i2cmux-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ - 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_LCD_D23__GPIO_1_23 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mac0_pins_cfa10049: mac0-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + MX28_PAD_SSP2_SS2__GPIO_2_21 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pca_pins_cfa10049: pca-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + MX28_PAD_SSP2_SS0__GPIO_2_19 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; rotary_pins_cfa10049: rotary-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ - 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; rotary_btn_pins_cfa10049: rotary-btn-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + MX28_PAD_SAIF1_SDATA0__GPIO_3_26 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; spi2_pins_cfa10049: spi2-cfa10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ - 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ - 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */ - 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */ - 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ - 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */ - 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */ + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_RESETN__GPIO_0_28 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_ALE__GPIO_0_26 + MX28_PAD_GPMI_CLE__GPIO_0_27 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10049: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + MX28_PAD_LCD_RESET__GPIO_3_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; w1_gpio_pins: w1-gpio@0 { reg = <0>; fsl,pinmux-ids = < - 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + MX28_PAD_LCD_D21__GPIO_1_21 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <0>; /* 0 will enable the keeper */ + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index 171bcbe1ec4b..c3900e7ba331 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -14,7 +14,7 @@ * The CFA-10055 is an expansion board for the CFA-10036 module and * CFA-10037, thus we need to include the CFA-10037 DTS. */ -/include/ "imx28-cfa10037.dts" +#include "imx28-cfa10037.dts" / { model = "Crystalfontz CFA-10055 Board"; @@ -26,64 +26,64 @@ spi2_pins_cfa10055: spi2-cfa10055@0 { reg = <0>; fsl,pinmux-ids = < - 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ - 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ - 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10055: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + MX28_PAD_LCD_RESET__GPIO_3_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index b45dd0e4ee57..cef959a97219 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -13,7 +13,7 @@ * The CFA-10055 is an expansion board for the CFA-10036 module and * CFA-10037, thus we need to include the CFA-10037 DTS. */ -/include/ "imx28-cfa10037.dts" +#include "imx28-cfa10037.dts" / { model = "Crystalfontz CFA-10056 Board"; @@ -25,37 +25,37 @@ spi2_pins_cfa10056: spi2-cfa10056@0 { reg = <0>; fsl,pinmux-ids = < - 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ - 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ - 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; lcdif_pins_cfa10056: lcdif-10056@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + MX28_PAD_LCD_RESET__GPIO_3_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 0333c0532f28..3c1312885ae0 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -14,7 +14,7 @@ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10057 Board"; @@ -26,51 +26,51 @@ usb_pins_cfa10057: usb-10057@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10057: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 64c64c55a82a..2469d34df0ae 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -14,7 +14,7 @@ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10058 Board"; @@ -26,24 +26,24 @@ usb_pins_cfa10058: usb-10058@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10058: lcdif-10058@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 15715d921d14..1f63845b8ce0 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Freescale i.MX28 Evaluation Kit"; @@ -70,52 +70,52 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ - 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */ - 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */ - 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ - 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ - 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP1_DATA3__GPIO_2_15 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; led_pin_gpio3_5: led_gpio3_5@0 { reg = <0>; fsl,pinmux-ids = < - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_evk: gpmi-nand-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ - 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ + MX28_PAD_GPMI_CE1N__GPMI_CE1N + MX28_PAD_GPMI_RDY1__GPMI_READY1 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_evk: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; @@ -182,6 +182,7 @@ }; lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; status = "okay"; }; @@ -242,6 +243,8 @@ ahb@80080000 { usb0: usb@80080000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_a>; vbus-supply = <®_usb0_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts new file mode 100644 index 000000000000..d3958da60bd7 --- /dev/null +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2013 Marek Vasut <[email protected]> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx28.dtsi" + +/ { + model = "MSR M28CU3"; + compatible = "msr,m28cu3", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "gpmi-nfc-0-boot"; + reg = <0x00000000 0x01400000>; + read-only; + }; + + partition@1 { + label = "gpmi-nfc-general-use"; + reg = <0x01400000 0x0ec00000>; + }; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a + &mmc2_cd_cfg + &mmc2_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd1>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + MX28_PAD_PWM4__GPIO_3_29 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_VSYNC__LCD_VSYNC + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_RESET__LCD_RESET + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_gpio: leds-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SCK__GPIO_2_24 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; + + ocotp@8002c000 { + status = "okay"; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display>; + reset-active-high; + status = "okay"; + + display: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <6410256>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hfront-porch = <20>; + vback-porch = <15>; + vfront-porch = <5>; + hsync-len = <30>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_2pins_b>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy1_pins_a>; + disable-over-current; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_gpio>; + + user1 { + label = "sd0-led"; + gpios = <&gpio2 26 0>; + linux,default-trigger = "mmc0"; + }; + + user2 { + label = "sd1-led"; + gpios = <&gpio2 24 0>; + linux,default-trigger = "mmc2"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 29 0>; + }; + + reg_vddio_sd1: vddio-sd1 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 0>; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 0d322a2bebaf..8e2477fbe1d7 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "DENX M28EVK"; @@ -92,26 +92,26 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ - 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ - 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ - 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */ - 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_AUART3_RX__GPIO_3_12 + MX28_PAD_AUART3_TX__GPIO_3_13 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_m28: lcdif-m28@0 { reg = <0>; fsl,pinmux-ids = < - 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */ - 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */ + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h new file mode 100644 index 000000000000..e11f69ba0fe4 --- /dev/null +++ b/arch/arm/boot/dts/imx28-pinfunc.h @@ -0,0 +1,506 @@ +/* + * Header providing constants for i.MX28 pinctrl bindings. + * + * Copyright (C) 2013 Lothar Waßmann <[email protected]> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DT_BINDINGS_MX28_PINCTRL_H__ +#define __DT_BINDINGS_MX28_PINCTRL_H__ + +#include "mxs-pinfunc.h" + +#define MX28_PAD_GPMI_D00__GPMI_D0 0x0000 +#define MX28_PAD_GPMI_D01__GPMI_D1 0x0010 +#define MX28_PAD_GPMI_D02__GPMI_D2 0x0020 +#define MX28_PAD_GPMI_D03__GPMI_D3 0x0030 +#define MX28_PAD_GPMI_D04__GPMI_D4 0x0040 +#define MX28_PAD_GPMI_D05__GPMI_D5 0x0050 +#define MX28_PAD_GPMI_D06__GPMI_D6 0x0060 +#define MX28_PAD_GPMI_D07__GPMI_D7 0x0070 +#define MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100 +#define MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110 +#define MX28_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 +#define MX28_PAD_GPMI_CE3N__GPMI_CE3N 0x0130 +#define MX28_PAD_GPMI_RDY0__GPMI_READY0 0x0140 +#define MX28_PAD_GPMI_RDY1__GPMI_READY1 0x0150 +#define MX28_PAD_GPMI_RDY2__GPMI_READY2 0x0160 +#define MX28_PAD_GPMI_RDY3__GPMI_READY3 0x0170 +#define MX28_PAD_GPMI_RDN__GPMI_RDN 0x0180 +#define MX28_PAD_GPMI_WRN__GPMI_WRN 0x0190 +#define MX28_PAD_GPMI_ALE__GPMI_ALE 0x01a0 +#define MX28_PAD_GPMI_CLE__GPMI_CLE 0x01b0 +#define MX28_PAD_GPMI_RESETN__GPMI_RESETN 0x01c0 +#define MX28_PAD_LCD_D00__LCD_D0 0x1000 +#define MX28_PAD_LCD_D01__LCD_D1 0x1010 +#define MX28_PAD_LCD_D02__LCD_D2 0x1020 +#define MX28_PAD_LCD_D03__LCD_D3 0x1030 +#define MX28_PAD_LCD_D04__LCD_D4 0x1040 +#define MX28_PAD_LCD_D05__LCD_D5 0x1050 +#define MX28_PAD_LCD_D06__LCD_D6 0x1060 +#define MX28_PAD_LCD_D07__LCD_D7 0x1070 +#define MX28_PAD_LCD_D08__LCD_D8 0x1080 +#define MX28_PAD_LCD_D09__LCD_D9 0x1090 +#define MX28_PAD_LCD_D10__LCD_D10 0x10a0 +#define MX28_PAD_LCD_D11__LCD_D11 0x10b0 +#define MX28_PAD_LCD_D12__LCD_D12 0x10c0 +#define MX28_PAD_LCD_D13__LCD_D13 0x10d0 +#define MX28_PAD_LCD_D14__LCD_D14 0x10e0 +#define MX28_PAD_LCD_D15__LCD_D15 0x10f0 +#define MX28_PAD_LCD_D16__LCD_D16 0x1100 +#define MX28_PAD_LCD_D17__LCD_D17 0x1110 +#define MX28_PAD_LCD_D18__LCD_D18 0x1120 +#define MX28_PAD_LCD_D19__LCD_D19 0x1130 +#define MX28_PAD_LCD_D20__LCD_D20 0x1140 +#define MX28_PAD_LCD_D21__LCD_D21 0x1150 +#define MX28_PAD_LCD_D22__LCD_D22 0x1160 +#define MX28_PAD_LCD_D23__LCD_D23 0x1170 +#define MX28_PAD_LCD_RD_E__LCD_RD_E 0x1180 +#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN 0x1190 +#define MX28_PAD_LCD_RS__LCD_RS 0x11a0 +#define MX28_PAD_LCD_CS__LCD_CS 0x11b0 +#define MX28_PAD_LCD_VSYNC__LCD_VSYNC 0x11c0 +#define MX28_PAD_LCD_HSYNC__LCD_HSYNC 0x11d0 +#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK 0x11e0 +#define MX28_PAD_LCD_ENABLE__LCD_ENABLE 0x11f0 +#define MX28_PAD_SSP0_DATA0__SSP0_D0 0x2000 +#define MX28_PAD_SSP0_DATA1__SSP0_D1 0x2010 +#define MX28_PAD_SSP0_DATA2__SSP0_D2 0x2020 +#define MX28_PAD_SSP0_DATA3__SSP0_D3 0x2030 +#define MX28_PAD_SSP0_DATA4__SSP0_D4 0x2040 +#define MX28_PAD_SSP0_DATA5__SSP0_D5 0x2050 +#define MX28_PAD_SSP0_DATA6__SSP0_D6 0x2060 +#define MX28_PAD_SSP0_DATA7__SSP0_D7 0x2070 +#define MX28_PAD_SSP0_CMD__SSP0_CMD 0x2080 +#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 0x2090 +#define MX28_PAD_SSP0_SCK__SSP0_SCK 0x20a0 +#define MX28_PAD_SSP1_SCK__SSP1_SCK 0x20c0 +#define MX28_PAD_SSP1_CMD__SSP1_CMD 0x20d0 +#define MX28_PAD_SSP1_DATA0__SSP1_D0 0x20e0 +#define MX28_PAD_SSP1_DATA3__SSP1_D3 0x20f0 +#define MX28_PAD_SSP2_SCK__SSP2_SCK 0x2100 +#define MX28_PAD_SSP2_MOSI__SSP2_CMD 0x2110 +#define MX28_PAD_SSP2_MISO__SSP2_D0 0x2120 +#define MX28_PAD_SSP2_SS0__SSP2_D3 0x2130 +#define MX28_PAD_SSP2_SS1__SSP2_D4 0x2140 +#define MX28_PAD_SSP2_SS2__SSP2_D5 0x2150 +#define MX28_PAD_SSP3_SCK__SSP3_SCK 0x2180 +#define MX28_PAD_SSP3_MOSI__SSP3_CMD 0x2190 +#define MX28_PAD_SSP3_MISO__SSP3_D0 0x21a0 +#define MX28_PAD_SSP3_SS0__SSP3_D3 0x21b0 +#define MX28_PAD_AUART0_RX__AUART0_RX 0x3000 +#define MX28_PAD_AUART0_TX__AUART0_TX 0x3010 +#define MX28_PAD_AUART0_CTS__AUART0_CTS 0x3020 +#define MX28_PAD_AUART0_RTS__AUART0_RTS 0x3030 +#define MX28_PAD_AUART1_RX__AUART1_RX 0x3040 +#define MX28_PAD_AUART1_TX__AUART1_TX 0x3050 +#define MX28_PAD_AUART1_CTS__AUART1_CTS 0x3060 +#define MX28_PAD_AUART1_RTS__AUART1_RTS 0x3070 +#define MX28_PAD_AUART2_RX__AUART2_RX 0x3080 +#define MX28_PAD_AUART2_TX__AUART2_TX 0x3090 +#define MX28_PAD_AUART2_CTS__AUART2_CTS 0x30a0 +#define MX28_PAD_AUART2_RTS__AUART2_RTS 0x30b0 +#define MX28_PAD_AUART3_RX__AUART3_RX 0x30c0 +#define MX28_PAD_AUART3_TX__AUART3_TX 0x30d0 +#define MX28_PAD_AUART3_CTS__AUART3_CTS 0x30e0 +#define MX28_PAD_AUART3_RTS__AUART3_RTS 0x30f0 +#define MX28_PAD_PWM0__PWM_0 0x3100 +#define MX28_PAD_PWM1__PWM_1 0x3110 +#define MX28_PAD_PWM2__PWM_2 0x3120 +#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 0x3140 +#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 0x3150 +#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 0x3160 +#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 0x3170 +#define MX28_PAD_I2C0_SCL__I2C0_SCL 0x3180 +#define MX28_PAD_I2C0_SDA__I2C0_SDA 0x3190 +#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 0x31a0 +#define MX28_PAD_SPDIF__SPDIF_TX 0x31b0 +#define MX28_PAD_PWM3__PWM_3 0x31c0 +#define MX28_PAD_PWM4__PWM_4 0x31d0 +#define MX28_PAD_LCD_RESET__LCD_RESET 0x31e0 +#define MX28_PAD_ENET0_MDC__ENET0_MDC 0x4000 +#define MX28_PAD_ENET0_MDIO__ENET0_MDIO 0x4010 +#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 0x4020 +#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 0x4030 +#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 0x4040 +#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 0x4050 +#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 0x4060 +#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 0x4070 +#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 0x4080 +#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 0x4090 +#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 0x40a0 +#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 0x40b0 +#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 0x40c0 +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 0x40d0 +#define MX28_PAD_ENET0_COL__ENET0_COL 0x40e0 +#define MX28_PAD_ENET0_CRS__ENET0_CRS 0x40f0 +#define MX28_PAD_ENET_CLK__CLKCTRL_ENET 0x4100 +#define MX28_PAD_JTAG_RTCK__JTAG_RTCK 0x4140 +#define MX28_PAD_EMI_D00__EMI_DATA0 0x5000 +#define MX28_PAD_EMI_D01__EMI_DATA1 0x5010 +#define MX28_PAD_EMI_D02__EMI_DATA2 0x5020 +#define MX28_PAD_EMI_D03__EMI_DATA3 0x5030 +#define MX28_PAD_EMI_D04__EMI_DATA4 0x5040 +#define MX28_PAD_EMI_D05__EMI_DATA5 0x5050 +#define MX28_PAD_EMI_D06__EMI_DATA6 0x5060 +#define MX28_PAD_EMI_D07__EMI_DATA7 0x5070 +#define MX28_PAD_EMI_D08__EMI_DATA8 0x5080 +#define MX28_PAD_EMI_D09__EMI_DATA9 0x5090 +#define MX28_PAD_EMI_D10__EMI_DATA10 0x50a0 +#define MX28_PAD_EMI_D11__EMI_DATA11 0x50b0 +#define MX28_PAD_EMI_D12__EMI_DATA12 0x50c0 +#define MX28_PAD_EMI_D13__EMI_DATA13 0x50d0 +#define MX28_PAD_EMI_D14__EMI_DATA14 0x50e0 +#define MX28_PAD_EMI_D15__EMI_DATA15 0x50f0 +#define MX28_PAD_EMI_ODT0__EMI_ODT0 0x5100 +#define MX28_PAD_EMI_DQM0__EMI_DQM0 0x5110 +#define MX28_PAD_EMI_ODT1__EMI_ODT1 0x5120 +#define MX28_PAD_EMI_DQM1__EMI_DQM1 0x5130 +#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK 0x5140 +#define MX28_PAD_EMI_CLK__EMI_CLK 0x5150 +#define MX28_PAD_EMI_DQS0__EMI_DQS0 0x5160 +#define MX28_PAD_EMI_DQS1__EMI_DQS1 0x5170 +#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN 0x51a0 +#define MX28_PAD_EMI_A00__EMI_ADDR0 0x6000 +#define MX28_PAD_EMI_A01__EMI_ADDR1 0x6010 +#define MX28_PAD_EMI_A02__EMI_ADDR2 0x6020 +#define MX28_PAD_EMI_A03__EMI_ADDR3 0x6030 +#define MX28_PAD_EMI_A04__EMI_ADDR4 0x6040 +#define MX28_PAD_EMI_A05__EMI_ADDR5 0x6050 +#define MX28_PAD_EMI_A06__EMI_ADDR6 0x6060 +#define MX28_PAD_EMI_A07__EMI_ADDR7 0x6070 +#define MX28_PAD_EMI_A08__EMI_ADDR8 0x6080 +#define MX28_PAD_EMI_A09__EMI_ADDR9 0x6090 +#define MX28_PAD_EMI_A10__EMI_ADDR10 0x60a0 +#define MX28_PAD_EMI_A11__EMI_ADDR11 0x60b0 +#define MX28_PAD_EMI_A12__EMI_ADDR12 0x60c0 +#define MX28_PAD_EMI_A13__EMI_ADDR13 0x60d0 +#define MX28_PAD_EMI_A14__EMI_ADDR14 0x60e0 +#define MX28_PAD_EMI_BA0__EMI_BA0 0x6100 +#define MX28_PAD_EMI_BA1__EMI_BA1 0x6110 +#define MX28_PAD_EMI_BA2__EMI_BA2 0x6120 +#define MX28_PAD_EMI_CASN__EMI_CASN 0x6130 +#define MX28_PAD_EMI_RASN__EMI_RASN 0x6140 +#define MX28_PAD_EMI_WEN__EMI_WEN 0x6150 +#define MX28_PAD_EMI_CE0N__EMI_CE0N 0x6160 +#define MX28_PAD_EMI_CE1N__EMI_CE1N 0x6170 +#define MX28_PAD_EMI_CKE__EMI_CKE 0x6180 +#define MX28_PAD_GPMI_D00__SSP1_D0 0x0001 +#define MX28_PAD_GPMI_D01__SSP1_D1 0x0011 +#define MX28_PAD_GPMI_D02__SSP1_D2 0x0021 +#define MX28_PAD_GPMI_D03__SSP1_D3 0x0031 +#define MX28_PAD_GPMI_D04__SSP1_D4 0x0041 +#define MX28_PAD_GPMI_D05__SSP1_D5 0x0051 +#define MX28_PAD_GPMI_D06__SSP1_D6 0x0061 +#define MX28_PAD_GPMI_D07__SSP1_D7 0x0071 +#define MX28_PAD_GPMI_CE0N__SSP3_D0 0x0101 +#define MX28_PAD_GPMI_CE1N__SSP3_D3 0x0111 +#define MX28_PAD_GPMI_CE2N__CAN1_TX 0x0121 +#define MX28_PAD_GPMI_CE3N__CAN1_RX 0x0131 +#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 0x0141 +#define MX28_PAD_GPMI_RDY1__SSP1_CMD 0x0151 +#define MX28_PAD_GPMI_RDY2__CAN0_TX 0x0161 +#define MX28_PAD_GPMI_RDY3__CAN0_RX 0x0171 +#define MX28_PAD_GPMI_RDN__SSP3_SCK 0x0181 +#define MX28_PAD_GPMI_WRN__SSP1_SCK 0x0191 +#define MX28_PAD_GPMI_ALE__SSP3_D1 0x01a1 +#define MX28_PAD_GPMI_CLE__SSP3_D2 0x01b1 +#define MX28_PAD_GPMI_RESETN__SSP3_CMD 0x01c1 +#define MX28_PAD_LCD_D03__ETM_DA8 0x1031 +#define MX28_PAD_LCD_D04__ETM_DA9 0x1041 +#define MX28_PAD_LCD_D08__ETM_DA3 0x1081 +#define MX28_PAD_LCD_D09__ETM_DA4 0x1091 +#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT 0x1141 +#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN 0x1151 +#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT 0x1161 +#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN 0x1171 +#define MX28_PAD_LCD_RD_E__LCD_VSYNC 0x1181 +#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC 0x1191 +#define MX28_PAD_LCD_RS__LCD_DOTCLK 0x11a1 +#define MX28_PAD_LCD_CS__LCD_ENABLE 0x11b1 +#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 0x11c1 +#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 0x11d1 +#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK 0x11e1 +#define MX28_PAD_SSP0_DATA4__SSP2_D0 0x2041 +#define MX28_PAD_SSP0_DATA5__SSP2_D3 0x2051 +#define MX28_PAD_SSP0_DATA6__SSP2_CMD 0x2061 +#define MX28_PAD_SSP0_DATA7__SSP2_SCK 0x2071 +#define MX28_PAD_SSP1_SCK__SSP2_D1 0x20c1 +#define MX28_PAD_SSP1_CMD__SSP2_D2 0x20d1 +#define MX28_PAD_SSP1_DATA0__SSP2_D6 0x20e1 +#define MX28_PAD_SSP1_DATA3__SSP2_D7 0x20f1 +#define MX28_PAD_SSP2_SCK__AUART2_RX 0x2101 +#define MX28_PAD_SSP2_MOSI__AUART2_TX 0x2111 +#define MX28_PAD_SSP2_MISO__AUART3_RX 0x2121 +#define MX28_PAD_SSP2_SS0__AUART3_TX 0x2131 +#define MX28_PAD_SSP2_SS1__SSP2_D1 0x2141 +#define MX28_PAD_SSP2_SS2__SSP2_D2 0x2151 +#define MX28_PAD_SSP3_SCK__AUART4_TX 0x2181 +#define MX28_PAD_SSP3_MOSI__AUART4_RX 0x2191 +#define MX28_PAD_SSP3_MISO__AUART4_RTS 0x21a1 +#define MX28_PAD_SSP3_SS0__AUART4_CTS 0x21b1 +#define MX28_PAD_AUART0_RX__I2C0_SCL 0x3001 +#define MX28_PAD_AUART0_TX__I2C0_SDA 0x3011 +#define MX28_PAD_AUART0_CTS__AUART4_RX 0x3021 +#define MX28_PAD_AUART0_RTS__AUART4_TX 0x3031 +#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 0x3041 +#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT 0x3051 +#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 0x3061 +#define MX28_PAD_AUART1_RTS__USB0_ID 0x3071 +#define MX28_PAD_AUART2_RX__SSP3_D1 0x3081 +#define MX28_PAD_AUART2_TX__SSP3_D2 0x3091 +#define MX28_PAD_AUART2_CTS__I2C1_SCL 0x30a1 +#define MX28_PAD_AUART2_RTS__I2C1_SDA 0x30b1 +#define MX28_PAD_AUART3_RX__CAN0_TX 0x30c1 +#define MX28_PAD_AUART3_TX__CAN0_RX 0x30d1 +#define MX28_PAD_AUART3_CTS__CAN1_TX 0x30e1 +#define MX28_PAD_AUART3_RTS__CAN1_RX 0x30f1 +#define MX28_PAD_PWM0__I2C1_SCL 0x3101 +#define MX28_PAD_PWM1__I2C1_SDA 0x3111 +#define MX28_PAD_PWM2__USB0_ID 0x3121 +#define MX28_PAD_SAIF0_MCLK__PWM_3 0x3141 +#define MX28_PAD_SAIF0_LRCLK__PWM_4 0x3151 +#define MX28_PAD_SAIF0_BITCLK__PWM_5 0x3161 +#define MX28_PAD_SAIF0_SDATA0__PWM_6 0x3171 +#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA 0x3181 +#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB 0x3191 +#define MX28_PAD_SAIF1_SDATA0__PWM_7 0x31a1 +#define MX28_PAD_LCD_RESET__LCD_VSYNC 0x31e1 +#define MX28_PAD_ENET0_MDC__GPMI_CE4N 0x4001 +#define MX28_PAD_ENET0_MDIO__GPMI_CE5N 0x4011 +#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N 0x4021 +#define MX28_PAD_ENET0_RXD0__GPMI_CE7N 0x4031 +#define MX28_PAD_ENET0_RXD1__GPMI_READY4 0x4041 +#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER 0x4051 +#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 0x4061 +#define MX28_PAD_ENET0_TXD0__GPMI_READY6 0x4071 +#define MX28_PAD_ENET0_TXD1__GPMI_READY7 0x4081 +#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 0x4091 +#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 0x40a1 +#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 0x40b1 +#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 0x40c1 +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER 0x40d1 +#define MX28_PAD_ENET0_COL__ENET1_TX_EN 0x40e1 +#define MX28_PAD_ENET0_CRS__ENET1_RX_EN 0x40f1 +#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER 0x0122 +#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK 0x0132 +#define MX28_PAD_GPMI_RDY0__USB0_ID 0x0142 +#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER 0x0162 +#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER 0x0172 +#define MX28_PAD_GPMI_ALE__SSP3_D4 0x01a2 +#define MX28_PAD_GPMI_CLE__SSP3_D5 0x01b2 +#define MX28_PAD_LCD_D00__ETM_DA0 0x1002 +#define MX28_PAD_LCD_D01__ETM_DA1 0x1012 +#define MX28_PAD_LCD_D02__ETM_DA2 0x1022 +#define MX28_PAD_LCD_D03__ETM_DA3 0x1032 +#define MX28_PAD_LCD_D04__ETM_DA4 0x1042 +#define MX28_PAD_LCD_D05__ETM_DA5 0x1052 +#define MX28_PAD_LCD_D06__ETM_DA6 0x1062 +#define MX28_PAD_LCD_D07__ETM_DA7 0x1072 +#define MX28_PAD_LCD_D08__ETM_DA8 0x1082 +#define MX28_PAD_LCD_D09__ETM_DA9 0x1092 +#define MX28_PAD_LCD_D10__ETM_DA10 0x10a2 +#define MX28_PAD_LCD_D11__ETM_DA11 0x10b2 +#define MX28_PAD_LCD_D12__ETM_DA12 0x10c2 +#define MX28_PAD_LCD_D13__ETM_DA13 0x10d2 +#define MX28_PAD_LCD_D14__ETM_DA14 0x10e2 +#define MX28_PAD_LCD_D15__ETM_DA15 0x10f2 +#define MX28_PAD_LCD_D16__ETM_DA7 0x1102 +#define MX28_PAD_LCD_D17__ETM_DA6 0x1112 +#define MX28_PAD_LCD_D18__ETM_DA5 0x1122 +#define MX28_PAD_LCD_D19__ETM_DA4 0x1132 +#define MX28_PAD_LCD_D20__ETM_DA3 0x1142 +#define MX28_PAD_LCD_D21__ETM_DA2 0x1152 +#define MX28_PAD_LCD_D22__ETM_DA1 0x1162 +#define MX28_PAD_LCD_D23__ETM_DA0 0x1172 +#define MX28_PAD_LCD_RD_E__ETM_TCTL 0x1182 +#define MX28_PAD_LCD_WR_RWN__ETM_TCLK 0x1192 +#define MX28_PAD_LCD_HSYNC__ETM_TCTL 0x11d2 +#define MX28_PAD_LCD_DOTCLK__ETM_TCLK 0x11e2 +#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT 0x20c2 +#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN 0x20d2 +#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT 0x20e2 +#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN 0x20f2 +#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 0x2102 +#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 0x2112 +#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 0x2122 +#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 0x2132 +#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 0x2142 +#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 0x2152 +#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT 0x2182 +#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN 0x2192 +#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT 0x21a2 +#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN 0x21b2 +#define MX28_PAD_AUART0_RX__DUART_CTS 0x3002 +#define MX28_PAD_AUART0_TX__DUART_RTS 0x3012 +#define MX28_PAD_AUART0_CTS__DUART_RX 0x3022 +#define MX28_PAD_AUART0_RTS__DUART_TX 0x3032 +#define MX28_PAD_AUART1_RX__PWM_0 0x3042 +#define MX28_PAD_AUART1_TX__PWM_1 0x3052 +#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA 0x3062 +#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB 0x3072 +#define MX28_PAD_AUART2_RX__SSP3_D4 0x3082 +#define MX28_PAD_AUART2_TX__SSP3_D5 0x3092 +#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK 0x30a2 +#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK 0x30b2 +#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT 0x30c2 +#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN 0x30d2 +#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT 0x30e2 +#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN 0x30f2 +#define MX28_PAD_PWM0__DUART_RX 0x3102 +#define MX28_PAD_PWM1__DUART_TX 0x3112 +#define MX28_PAD_PWM2__USB1_OVERCURRENT 0x3122 +#define MX28_PAD_SAIF0_MCLK__AUART4_CTS 0x3142 +#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS 0x3152 +#define MX28_PAD_SAIF0_BITCLK__AUART4_RX 0x3162 +#define MX28_PAD_SAIF0_SDATA0__AUART4_TX 0x3172 +#define MX28_PAD_I2C0_SCL__DUART_RX 0x3182 +#define MX28_PAD_I2C0_SDA__DUART_TX 0x3192 +#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 0x31a2 +#define MX28_PAD_SPDIF__ENET1_RX_ER 0x31b2 +#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 0x4002 +#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 0x4012 +#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 0x4022 +#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 0x4032 +#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT 0x4052 +#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT 0x4092 +#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN 0x40a2 +#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT 0x40b2 +#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN 0x40c2 +#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN 0x40d2 +#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT 0x40e2 +#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN 0x40f2 +#define MX28_PAD_GPMI_D00__GPIO_0_0 0x0003 +#define MX28_PAD_GPMI_D01__GPIO_0_1 0x0013 +#define MX28_PAD_GPMI_D02__GPIO_0_2 0x0023 +#define MX28_PAD_GPMI_D03__GPIO_0_3 0x0033 +#define MX28_PAD_GPMI_D04__GPIO_0_4 0x0043 +#define MX28_PAD_GPMI_D05__GPIO_0_5 0x0053 +#define MX28_PAD_GPMI_D06__GPIO_0_6 0x0063 +#define MX28_PAD_GPMI_D07__GPIO_0_7 0x0073 +#define MX28_PAD_GPMI_CE0N__GPIO_0_16 0x0103 +#define MX28_PAD_GPMI_CE1N__GPIO_0_17 0x0113 +#define MX28_PAD_GPMI_CE2N__GPIO_0_18 0x0123 +#define MX28_PAD_GPMI_CE3N__GPIO_0_19 0x0133 +#define MX28_PAD_GPMI_RDY0__GPIO_0_20 0x0143 +#define MX28_PAD_GPMI_RDY1__GPIO_0_21 0x0153 +#define MX28_PAD_GPMI_RDY2__GPIO_0_22 0x0163 +#define MX28_PAD_GPMI_RDY3__GPIO_0_23 0x0173 +#define MX28_PAD_GPMI_RDN__GPIO_0_24 0x0183 +#define MX28_PAD_GPMI_WRN__GPIO_0_25 0x0193 +#define MX28_PAD_GPMI_ALE__GPIO_0_26 0x01a3 +#define MX28_PAD_GPMI_CLE__GPIO_0_27 0x01b3 +#define MX28_PAD_GPMI_RESETN__GPIO_0_28 0x01c3 +#define MX28_PAD_LCD_D00__GPIO_1_0 0x1003 +#define MX28_PAD_LCD_D01__GPIO_1_1 0x1013 +#define MX28_PAD_LCD_D02__GPIO_1_2 0x1023 +#define MX28_PAD_LCD_D03__GPIO_1_3 0x1033 +#define MX28_PAD_LCD_D04__GPIO_1_4 0x1043 +#define MX28_PAD_LCD_D05__GPIO_1_5 0x1053 +#define MX28_PAD_LCD_D06__GPIO_1_6 0x1063 +#define MX28_PAD_LCD_D07__GPIO_1_7 0x1073 +#define MX28_PAD_LCD_D08__GPIO_1_8 0x1083 +#define MX28_PAD_LCD_D09__GPIO_1_9 0x1093 +#define MX28_PAD_LCD_D10__GPIO_1_10 0x10a3 +#define MX28_PAD_LCD_D11__GPIO_1_11 0x10b3 +#define MX28_PAD_LCD_D12__GPIO_1_12 0x10c3 +#define MX28_PAD_LCD_D13__GPIO_1_13 0x10d3 +#define MX28_PAD_LCD_D14__GPIO_1_14 0x10e3 +#define MX28_PAD_LCD_D15__GPIO_1_15 0x10f3 +#define MX28_PAD_LCD_D16__GPIO_1_16 0x1103 +#define MX28_PAD_LCD_D17__GPIO_1_17 0x1113 +#define MX28_PAD_LCD_D18__GPIO_1_18 0x1123 +#define MX28_PAD_LCD_D19__GPIO_1_19 0x1133 +#define MX28_PAD_LCD_D20__GPIO_1_20 0x1143 +#define MX28_PAD_LCD_D21__GPIO_1_21 0x1153 +#define MX28_PAD_LCD_D22__GPIO_1_22 0x1163 +#define MX28_PAD_LCD_D23__GPIO_1_23 0x1173 +#define MX28_PAD_LCD_RD_E__GPIO_1_24 0x1183 +#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 0x1193 +#define MX28_PAD_LCD_RS__GPIO_1_26 0x11a3 +#define MX28_PAD_LCD_CS__GPIO_1_27 0x11b3 +#define MX28_PAD_LCD_VSYNC__GPIO_1_28 0x11c3 +#define MX28_PAD_LCD_HSYNC__GPIO_1_29 0x11d3 +#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 0x11e3 +#define MX28_PAD_LCD_ENABLE__GPIO_1_31 0x11f3 +#define MX28_PAD_SSP0_DATA0__GPIO_2_0 0x2003 +#define MX28_PAD_SSP0_DATA1__GPIO_2_1 0x2013 +#define MX28_PAD_SSP0_DATA2__GPIO_2_2 0x2023 +#define MX28_PAD_SSP0_DATA3__GPIO_2_3 0x2033 +#define MX28_PAD_SSP0_DATA4__GPIO_2_4 0x2043 +#define MX28_PAD_SSP0_DATA5__GPIO_2_5 0x2053 +#define MX28_PAD_SSP0_DATA6__GPIO_2_6 0x2063 +#define MX28_PAD_SSP0_DATA7__GPIO_2_7 0x2073 +#define MX28_PAD_SSP0_CMD__GPIO_2_8 0x2083 +#define MX28_PAD_SSP0_DETECT__GPIO_2_9 0x2093 +#define MX28_PAD_SSP0_SCK__GPIO_2_10 0x20a3 +#define MX28_PAD_SSP1_SCK__GPIO_2_12 0x20c3 +#define MX28_PAD_SSP1_CMD__GPIO_2_13 0x20d3 +#define MX28_PAD_SSP1_DATA0__GPIO_2_14 0x20e3 +#define MX28_PAD_SSP1_DATA3__GPIO_2_15 0x20f3 +#define MX28_PAD_SSP2_SCK__GPIO_2_16 0x2103 +#define MX28_PAD_SSP2_MOSI__GPIO_2_17 0x2113 +#define MX28_PAD_SSP2_MISO__GPIO_2_18 0x2123 +#define MX28_PAD_SSP2_SS0__GPIO_2_19 0x2133 +#define MX28_PAD_SSP2_SS1__GPIO_2_20 0x2143 +#define MX28_PAD_SSP2_SS2__GPIO_2_21 0x2153 +#define MX28_PAD_SSP3_SCK__GPIO_2_24 0x2183 +#define MX28_PAD_SSP3_MOSI__GPIO_2_25 0x2193 +#define MX28_PAD_SSP3_MISO__GPIO_2_26 0x21a3 +#define MX28_PAD_SSP3_SS0__GPIO_2_27 0x21b3 +#define MX28_PAD_AUART0_RX__GPIO_3_0 0x3003 +#define MX28_PAD_AUART0_TX__GPIO_3_1 0x3013 +#define MX28_PAD_AUART0_CTS__GPIO_3_2 0x3023 +#define MX28_PAD_AUART0_RTS__GPIO_3_3 0x3033 +#define MX28_PAD_AUART1_RX__GPIO_3_4 0x3043 +#define MX28_PAD_AUART1_TX__GPIO_3_5 0x3053 +#define MX28_PAD_AUART1_CTS__GPIO_3_6 0x3063 +#define MX28_PAD_AUART1_RTS__GPIO_3_7 0x3073 +#define MX28_PAD_AUART2_RX__GPIO_3_8 0x3083 +#define MX28_PAD_AUART2_TX__GPIO_3_9 0x3093 +#define MX28_PAD_AUART2_CTS__GPIO_3_10 0x30a3 +#define MX28_PAD_AUART2_RTS__GPIO_3_11 0x30b3 +#define MX28_PAD_AUART3_RX__GPIO_3_12 0x30c3 +#define MX28_PAD_AUART3_TX__GPIO_3_13 0x30d3 +#define MX28_PAD_AUART3_CTS__GPIO_3_14 0x30e3 +#define MX28_PAD_AUART3_RTS__GPIO_3_15 0x30f3 +#define MX28_PAD_PWM0__GPIO_3_16 0x3103 +#define MX28_PAD_PWM1__GPIO_3_17 0x3113 +#define MX28_PAD_PWM2__GPIO_3_18 0x3123 +#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 0x3143 +#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 0x3153 +#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 0x3163 +#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 0x3173 +#define MX28_PAD_I2C0_SCL__GPIO_3_24 0x3183 +#define MX28_PAD_I2C0_SDA__GPIO_3_25 0x3193 +#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 0x31a3 +#define MX28_PAD_SPDIF__GPIO_3_27 0x31b3 +#define MX28_PAD_PWM3__GPIO_3_28 0x31c3 +#define MX28_PAD_PWM4__GPIO_3_29 0x31d3 +#define MX28_PAD_LCD_RESET__GPIO_3_30 0x31e3 +#define MX28_PAD_ENET0_MDC__GPIO_4_0 0x4003 +#define MX28_PAD_ENET0_MDIO__GPIO_4_1 0x4013 +#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 0x4023 +#define MX28_PAD_ENET0_RXD0__GPIO_4_3 0x4033 +#define MX28_PAD_ENET0_RXD1__GPIO_4_4 0x4043 +#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 0x4053 +#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 0x4063 +#define MX28_PAD_ENET0_TXD0__GPIO_4_7 0x4073 +#define MX28_PAD_ENET0_TXD1__GPIO_4_8 0x4083 +#define MX28_PAD_ENET0_RXD2__GPIO_4_9 0x4093 +#define MX28_PAD_ENET0_RXD3__GPIO_4_10 0x40a3 +#define MX28_PAD_ENET0_TXD2__GPIO_4_11 0x40b3 +#define MX28_PAD_ENET0_TXD3__GPIO_4_12 0x40c3 +#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 0x40d3 +#define MX28_PAD_ENET0_COL__GPIO_4_14 0x40e3 +#define MX28_PAD_ENET0_CRS__GPIO_4_15 0x40f3 +#define MX28_PAD_ENET_CLK__GPIO_4_16 0x4103 +#define MX28_PAD_JTAG_RTCK__GPIO_4_20 0x4143 + +#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 6c6a5442800a..4870f07bf56a 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "SchulerControl GmbH, SC SPS 1"; @@ -29,13 +29,13 @@ hog_pins_a: hog-gpios@0 { reg = <0>; fsl,pinmux-ids = < - 0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */ - 0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */ - 0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */ + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D06__GPIO_0_6 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 37be532f0055..be5a0550d58c 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,106 +1,139 @@ +/* + * Copyright 2012 Shawn Guo <[email protected]> + * Copyright 2013 Lothar Waßmann <[email protected]> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Ka-Ro electronics TX28 module"; compatible = "karo,tx28", "fsl,imx28"; + aliases { + can0 = &can0; + can1 = &can1; + display = &display; + ds1339 = &ds1339; + gpio5 = &gpio5; + lcdif = &lcdif; + lcdif_23bit_pins = &tx28_lcdif_23bit_pins; + lcdif_24bit_pins = &lcdif_24bit_pins_a; + stk5led = &user_led; + usbotg = &usb0; + }; + memory { - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: ssp@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; + reg = <0 0>; /* will be filled in by U-Boot */ + }; - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - mac0_pins_gpio: mac0-gpio-mode@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */ - 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */ - 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */ - 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */ - 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */ - 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */ - 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */ - 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */ - 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - }; + onewire { + compatible = "w1-gpio"; + gpios = <&gpio2 7 0>; + status = "disabled"; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 18 0>; + enable-active-high; }; - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 27 0>; + enable-active-high; + }; - ds1339: rtc@68 { - compatible = "mxim,ds1339"; - reg = <0x68>; - }; - }; + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; - status = "okay"; - }; + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_4pins_a>; - status = "okay"; - }; + reg_can_xcvr: can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 0 0>; + enable-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_flexcan_xcvr_pins>; + }; - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_pins_a>; - status = "okay"; - }; + reg_lcd: lcd-power { + compatible = "regulator-fixed"; + regulator-name = "LCD POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 31 0>; + enable-active-high; + }; + + reg_lcd_reset: lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "LCD RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + startup-delay-us = <300000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default", "gpio_mode"; - pinctrl-0 = <&mac0_pins_a>; - pinctrl-1 = <&mac0_pins_gpio>; - status = "okay"; + clocks { + #address-cells = <1>; + #size-cells = <0>; + mclk: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <27000000>; }; }; + sound { + compatible = "fsl,imx28-tx28-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-tx28-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; + leds { compatible = "gpio-leds"; - user { + user_led: user { label = "Heartbeat"; gpios = <&gpio4 10 0>; linux,default-trigger = "heartbeat"; @@ -109,8 +142,512 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; + pwms = <&pwm 0 500000>; + /* + * a silly way to create a 1:1 relationship between the + * PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + matrix_keypad: matrix-keypad@0 { + compatible = "gpio-matrix-keypad"; + col-gpios = < + &gpio5 0 0 + &gpio5 1 0 + &gpio5 2 0 + &gpio5 3 0 + >; + row-gpios = < + &gpio5 4 0 + &gpio5 5 0 + &gpio5 6 0 + &gpio5 7 0 + >; + /* sample keymap */ + linux,keymap = < + 0x00000074 /* row 0, col 0, KEY_POWER */ + 0x00010052 /* row 0, col 1, KEY_KP0 */ + 0x0002004f /* row 0, col 2, KEY_KP1 */ + 0x00030050 /* row 0, col 3, KEY_KP2 */ + 0x01000051 /* row 1, col 0, KEY_KP3 */ + 0x0101004b /* row 1, col 1, KEY_KP4 */ + 0x0102004c /* row 1, col 2, KEY_KP5 */ + 0x0103004d /* row 1, col 3, KEY_KP6 */ + 0x02000047 /* row 2, col 0, KEY_KP7 */ + 0x02010048 /* row 2, col 1, KEY_KP8 */ + 0x02020049 /* row 2, col 2, KEY_KP9 */ + >; + gpio-activelow; + linux,wakeup; + debounce-delay-ms = <100>; + col-scan-delay-us = <5000>; + linux,no-autorepeat; + }; +}; + +/* 2nd TX-Std UART - (A)UART1 */ +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +/* 3rd TX-Std UART - (A)UART3 */ +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&digctl { + status = "okay"; +}; + +/* 1st TX-Std UART - (D)UART */ +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_4pins_a>; + status = "okay"; +}; + +&gpmi { + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + clocks = <&mclk>; + }; + + gpio5: pca953x@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_pca9554_pins>; + interrupt-parent = <&gpio3>; + interrupts = <28 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_edt_ft5x06_pins>; + interrupt-parent = <&gpio2>; + interrupts = <5 0>; + reset-gpios = <&gpio2 6 1>; + wake-gpios = <&gpio4 9 0>; + }; + + touchscreen: tsc2007@48 { + compatible = "ti,tsc2007"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_tsc2007_pins>; + interrupt-parent = <&gpio3>; + interrupts = <20 0>; + pendown-gpio = <&gpio3 20 1>; + ti,x-plate-ohms = /bits/ 16 <660>; + }; + + ds1339: rtc@68 { + compatible = "mxim,ds1339"; + reg = <0x68>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>; + lcd-supply = <®_lcd>; + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <32>; + bus-width = <24>; + display-timings { + native-mode = <&timing5>; + timing0: timing0 { + panel-name = "VGA"; + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing1: timing1 { + panel-name = "ETV570"; + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing2: timing2 { + panel-name = "ET0350"; + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing3: timing3 { + panel-name = "ET0430"; + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing4: timing4 { + panel-name = "ET0500", "ET0700"; + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing5: timing5 { + panel-name = "ETQ570"; + clock-frequency = <6400000>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default", "gpio_mode"; + pinctrl-0 = <&mac0_pins_a>; + pinctrl-1 = <&tx28_mac0_pins_gpio>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + /* not enabled by default */ +}; + +&mxs_rtc { + status = "okay"; +}; + +&ocotp { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins { + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */ + MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */ + MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins { + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__GPIO_1_0 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_lcdif_23bit_pins: tx28-lcdif-23bit { + fsl,pinmux-ids = < + /* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */ + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + MX28_PAD_LCD_D18__LCD_D18 + MX28_PAD_LCD_D19__LCD_D19 + MX28_PAD_LCD_D20__LCD_D20 + MX28_PAD_LCD_D21__LCD_D21 + MX28_PAD_LCD_D22__LCD_D22 + MX28_PAD_LCD_D23__LCD_D23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl { + fsl,pinmux-ids = < + MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */ + MX28_PAD_LCD_RESET__GPIO_3_30 /* Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_mac0_pins_gpio: tx28-mac0-gpio-pins { + fsl,pinmux-ids = < + MX28_PAD_ENET0_MDC__GPIO_4_0 + MX28_PAD_ENET0_MDIO__GPIO_4_1 + MX28_PAD_ENET0_RX_EN__GPIO_4_2 + MX28_PAD_ENET0_RXD0__GPIO_4_3 + MX28_PAD_ENET0_RXD1__GPIO_4_4 + MX28_PAD_ENET0_TX_EN__GPIO_4_6 + MX28_PAD_ENET0_TXD0__GPIO_4_7 + MX28_PAD_ENET0_TXD1__GPIO_4_8 + MX28_PAD_ENET_CLK__GPIO_4_16 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_pca9554_pins: tx28-pca9554-pins { + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_tsc2007_pins: tx28-tsc2007-pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + + tx28_usbphy0_pins: tx28-usbphy0-pins { + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */ + MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */ + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_usbphy1_pins: tx28-usbphy1-pins { + fsl,pinmux-ids = < + MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */ + MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */ + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_b>; + fsl,saif-master; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default", "special"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp3 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_a>; + clock-frequency = <57600000>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <57600000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <57600000>; }; }; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + disable-over-current; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&tx28_usbphy0_pins>; + phy_type = "utmi"; + status = "okay"; +}; + +&usbphy1 { + pinctrl-names = "default"; + pinctrl-0 = <&tx28_usbphy1_pins>; + phy_type = "utmi"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7363fded95ee..1c5ed9dbebb5 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -9,7 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx28-pinfunc.h" / { interrupt-parent = <&icoll>; @@ -207,538 +208,579 @@ duart_pins_a: duart@0 { reg = <0>; fsl,pinmux-ids = < - 0x3102 /* MX28_PAD_PWM0__DUART_RX */ - 0x3112 /* MX28_PAD_PWM1__DUART_TX */ + MX28_PAD_PWM0__DUART_RX + MX28_PAD_PWM1__DUART_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; duart_pins_b: duart@1 { reg = <1>; fsl,pinmux-ids = < - 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ - 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + MX28_PAD_AUART0_CTS__DUART_RX + MX28_PAD_AUART0_RTS__DUART_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; duart_4pins_a: duart-4pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ - 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ - 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ - 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ + MX28_PAD_AUART0_CTS__DUART_RX + MX28_PAD_AUART0_RTS__DUART_TX + MX28_PAD_AUART0_RX__DUART_CTS + MX28_PAD_AUART0_TX__DUART_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < - 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ - 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ - 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ - 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ - 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ - 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ - 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ - 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ - 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ - 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ - 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ - 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ - 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ - 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ - 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + MX28_PAD_GPMI_D00__GPMI_D0 + MX28_PAD_GPMI_D01__GPMI_D1 + MX28_PAD_GPMI_D02__GPMI_D2 + MX28_PAD_GPMI_D03__GPMI_D3 + MX28_PAD_GPMI_D04__GPMI_D4 + MX28_PAD_GPMI_D05__GPMI_D5 + MX28_PAD_GPMI_D06__GPMI_D6 + MX28_PAD_GPMI_D07__GPMI_D7 + MX28_PAD_GPMI_CE0N__GPMI_CE0N + MX28_PAD_GPMI_RDY0__GPMI_READY0 + MX28_PAD_GPMI_RDN__GPMI_RDN + MX28_PAD_GPMI_WRN__GPMI_WRN + MX28_PAD_GPMI_ALE__GPMI_ALE + MX28_PAD_GPMI_CLE__GPMI_CLE + MX28_PAD_GPMI_RESETN__GPMI_RESETN >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_status_cfg: gpmi-status-cfg { fsl,pinmux-ids = < - 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ - 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ - 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + MX28_PAD_GPMI_RDN__GPMI_RDN + MX28_PAD_GPMI_WRN__GPMI_WRN + MX28_PAD_GPMI_RESETN__GPMI_RESETN >; - fsl,drive-strength = <2>; + fsl,drive-strength = <MXS_DRIVE_12mA>; }; auart0_pins_a: auart0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ - 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ - 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ - 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ + MX28_PAD_AUART0_RX__AUART0_RX + MX28_PAD_AUART0_TX__AUART0_TX + MX28_PAD_AUART0_CTS__AUART0_CTS + MX28_PAD_AUART0_RTS__AUART0_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart0_2pins_a: auart0-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ - 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + MX28_PAD_AUART0_RX__AUART0_RX + MX28_PAD_AUART0_TX__AUART0_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart1_pins_a: auart1@0 { reg = <0>; fsl,pinmux-ids = < - 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ - 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ - 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ - 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ + MX28_PAD_AUART1_RX__AUART1_RX + MX28_PAD_AUART1_TX__AUART1_TX + MX28_PAD_AUART1_CTS__AUART1_CTS + MX28_PAD_AUART1_RTS__AUART1_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart1_2pins_a: auart1-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ - 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + MX28_PAD_AUART1_RX__AUART1_RX + MX28_PAD_AUART1_TX__AUART1_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart2_2pins_a: auart2-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ - 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ + MX28_PAD_SSP2_SCK__AUART2_RX + MX28_PAD_SSP2_MOSI__AUART2_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart2_2pins_b: auart2-2pins@1 { reg = <1>; fsl,pinmux-ids = < - 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */ - 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */ + MX28_PAD_AUART2_RX__AUART2_RX + MX28_PAD_AUART2_TX__AUART2_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_pins_a: auart3@0 { reg = <0>; fsl,pinmux-ids = < - 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ - 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ - 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ - 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ + MX28_PAD_AUART3_RX__AUART3_RX + MX28_PAD_AUART3_TX__AUART3_TX + MX28_PAD_AUART3_CTS__AUART3_CTS + MX28_PAD_AUART3_RTS__AUART3_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_2pins_a: auart3-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ - 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ + MX28_PAD_SSP2_MISO__AUART3_RX + MX28_PAD_SSP2_SS0__AUART3_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_2pins_b: auart3-2pins@1 { reg = <1>; fsl,pinmux-ids = < - 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ - 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + MX28_PAD_AUART3_RX__AUART3_RX + MX28_PAD_AUART3_TX__AUART3_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart4_2pins_a: auart4@0 { reg = <0>; fsl,pinmux-ids = < - 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */ - 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */ + MX28_PAD_SSP3_SCK__AUART4_TX + MX28_PAD_SSP3_MOSI__AUART4_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mac0_pins_a: mac0@0 { reg = <0>; fsl,pinmux-ids = < - 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ - 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ - 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ - 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ - 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ - 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ - 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ - 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ - 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ + MX28_PAD_ENET0_MDC__ENET0_MDC + MX28_PAD_ENET0_MDIO__ENET0_MDIO + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN + MX28_PAD_ENET0_RXD0__ENET0_RXD0 + MX28_PAD_ENET0_RXD1__ENET0_RXD1 + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN + MX28_PAD_ENET0_TXD0__ENET0_TXD0 + MX28_PAD_ENET0_TXD1__ENET0_TXD1 + MX28_PAD_ENET_CLK__CLKCTRL_ENET >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mac1_pins_a: mac1@0 { reg = <0>; fsl,pinmux-ids = < - 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ - 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ - 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ - 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ - 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ - 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ + MX28_PAD_ENET0_CRS__ENET1_RX_EN + MX28_PAD_ENET0_RXD2__ENET1_RXD0 + MX28_PAD_ENET0_RXD3__ENET1_RXD1 + MX28_PAD_ENET0_COL__ENET1_TX_EN + MX28_PAD_ENET0_TXD2__ENET1_TXD0 + MX28_PAD_ENET0_TXD3__ENET1_TXD1 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ - 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ - 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ - 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ - 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ - 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ - 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ - 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ - 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ - 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ - 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + MX28_PAD_SSP0_DATA0__SSP0_D0 + MX28_PAD_SSP0_DATA1__SSP0_D1 + MX28_PAD_SSP0_DATA2__SSP0_D2 + MX28_PAD_SSP0_DATA3__SSP0_D3 + MX28_PAD_SSP0_DATA4__SSP0_D4 + MX28_PAD_SSP0_DATA5__SSP0_D5 + MX28_PAD_SSP0_DATA6__SSP0_D6 + MX28_PAD_SSP0_DATA7__SSP0_D7 + MX28_PAD_SSP0_CMD__SSP0_CMD + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT + MX28_PAD_SSP0_SCK__SSP0_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_4bit_pins_a: mmc0-4bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ - 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ - 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ - 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ - 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ - 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ - 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + MX28_PAD_SSP0_DATA0__SSP0_D0 + MX28_PAD_SSP0_DATA1__SSP0_D1 + MX28_PAD_SSP0_DATA2__SSP0_D2 + MX28_PAD_SSP0_DATA3__SSP0_D3 + MX28_PAD_SSP0_CMD__SSP0_CMD + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT + MX28_PAD_SSP0_SCK__SSP0_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_cd_cfg: mmc0-cd-cfg { fsl,pinmux-ids = < - 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT >; - fsl,pull-up = <0>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc0_sck_cfg: mmc0-sck-cfg { fsl,pinmux-ids = < - 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + MX28_PAD_SSP0_SCK__SSP0_SCK >; - fsl,drive-strength = <2>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP1_SCK__SSP2_D1 + MX28_PAD_SSP1_CMD__SSP2_D2 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_AUART1_RX__SSP2_CARD_DETECT + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc2_cd_cfg: mmc2-cd-cfg { + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__SSP2_CARD_DETECT + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_sck_cfg: mmc2-sck-cfg { + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; i2c0_pins_a: i2c0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ - 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ + MX28_PAD_I2C0_SCL__I2C0_SCL + MX28_PAD_I2C0_SDA__I2C0_SDA >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; i2c0_pins_b: i2c0@1 { reg = <1>; fsl,pinmux-ids = < - 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ - 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ + MX28_PAD_AUART0_RX__I2C0_SCL + MX28_PAD_AUART0_TX__I2C0_SDA >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; i2c1_pins_a: i2c1@0 { reg = <0>; fsl,pinmux-ids = < - 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */ - 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */ + MX28_PAD_PWM0__I2C1_SCL + MX28_PAD_PWM1__I2C1_SDA >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ - 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ - 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ - 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; saif0_pins_b: saif0@1 { reg = <1>; fsl,pinmux-ids = < - 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ - 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ - 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; saif1_pins_a: saif1@0 { reg = <0>; fsl,pinmux-ids = < - 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; pwm0_pins_a: pwm0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3100 /* MX28_PAD_PWM0__PWM_0 */ + MX28_PAD_PWM0__PWM_0 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < - 0x3120 /* MX28_PAD_PWM2__PWM_2 */ + MX28_PAD_PWM2__PWM_2 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm3_pins_a: pwm3@0 { reg = <0>; fsl,pinmux-ids = < - 0x31c0 /* MX28_PAD_PWM3__PWM_3 */ + MX28_PAD_PWM3__PWM_3 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm3_pins_b: pwm3@1 { reg = <1>; fsl,pinmux-ids = < - 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */ + MX28_PAD_SAIF0_MCLK__PWM_3 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < - 0x31d0 /* MX28_PAD_PWM4__PWM_4 */ + MX28_PAD_PWM4__PWM_4 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ - 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ - 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ - 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ - 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ - 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ - 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + MX28_PAD_LCD_D18__LCD_D18 + MX28_PAD_LCD_D19__LCD_D19 + MX28_PAD_LCD_D20__LCD_D20 + MX28_PAD_LCD_D21__LCD_D21 + MX28_PAD_LCD_D22__LCD_D22 + MX28_PAD_LCD_D23__LCD_D23 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_16bit_pins_a: lcdif-16bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_sync_pins_a: lcdif-sync@0 { reg = <0>; fsl,pinmux-ids = < - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < - 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ - 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ + MX28_PAD_GPMI_RDY2__CAN0_TX + MX28_PAD_GPMI_RDY3__CAN0_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; can1_pins_a: can1@0 { reg = <0>; fsl,pinmux-ids = < - 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ - 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ + MX28_PAD_GPMI_CE2N__CAN1_TX + MX28_PAD_GPMI_CE3N__CAN1_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; spi2_pins_a: spi2@0 { reg = <0>; fsl,pinmux-ids = < - 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ - 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ - 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ - 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ + MX28_PAD_SSP2_SCK__SSP2_SCK + MX28_PAD_SSP2_MOSI__SSP2_CMD + MX28_PAD_SSP2_MISO__SSP2_D0 + MX28_PAD_SSP2_SS0__SSP2_D3 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; spi3_pins_a: spi3@0 { reg = <0>; fsl,pinmux-ids = < - 0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */ - 0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */ - 0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */ - 0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */ - 0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */ - 0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */ + MX28_PAD_AUART2_RX__SSP3_D4 + MX28_PAD_AUART2_TX__SSP3_D5 + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usbphy0_pins_a: usbphy0@0 { reg = <0>; fsl,pinmux-ids = < - 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */ + MX28_PAD_SSP2_SS2__USB0_OVERCURRENT >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usbphy0_pins_b: usbphy0@1 { reg = <1>; fsl,pinmux-ids = < - 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */ + MX28_PAD_AUART1_CTS__USB0_OVERCURRENT >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usbphy1_pins_a: usbphy1@0 { reg = <0>; fsl,pinmux-ids = < - 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */ + MX28_PAD_SSP2_SS1__USB1_OVERCURRENT + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_id_pins_a: usb0id@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RTS__USB0_ID >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 123fe84e0e8c..5a7f552786a1 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -16,6 +16,33 @@ model = "Armadeus Systems APF51Dev docking/development board"; compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + + display-timings { + lw700 { + native-mode; + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 1d337d99ecd5..be1407cf5abd 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -27,6 +27,20 @@ interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1_1>; + display-timings { + native-mode = <&timing0>; + timing0: dvi { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; display@di1 { @@ -35,6 +49,25 @@ interface-pix-fmt = "rgb565"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp2_1>; + status = "disabled"; + display-timings { + native-mode = <&timing1>; + timing1: claawvga { + clock-frequency = <27000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <60>; + vback-porch = <10>; + vfront-porch = <10>; + hsync-len = <20>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; }; gpio-keys { @@ -95,7 +128,7 @@ &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; + pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>; fsl,uart-has-rtscts; status = "okay"; }; @@ -252,7 +285,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; + pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>; fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 54cee6517902..f4dcff3a9969 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -86,6 +86,11 @@ interrupt-parent = <&tzic>; ranges; + iram: iram@1ffe0000 { + compatible = "mmio-sram"; + reg = <0x1ffe0000 0x20000>; + }; + ipu: ipu@40000000 { #crtc-cells = <1>; compatible = "fsl,imx51-ipu"; @@ -374,6 +379,14 @@ clocks = <&clks 107>; }; + owire: owire@83fa4000 { + compatible = "fsl,imx51-owire", "fsl,imx21-owire"; + reg = <0x83fa4000 0x4000>; + interrupts = <88>; + clocks = <&clks 159>; + status = "disabled"; + }; + ecspi2: ecspi@83fac000 { #address-cells = <1>; #size-cells = <0>; @@ -747,6 +760,11 @@ fsl,pins = < MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart1_rtscts_1: uart1rtscts-1 { + fsl,pins = < MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 >; @@ -767,6 +785,11 @@ fsl,pins = < MX51_PAD_EIM_D25__UART3_RXD 0x1c5 MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + >; + }; + + pinctrl_uart3_rtscts_1: uart3rtscts-1 { + fsl,pins = < MX51_PAD_EIM_D27__UART3_RTS 0x1c5 MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index e97ddae09d74..91a5935a4aac 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -55,19 +55,20 @@ label = "Power Button"; gpios = <&gpio1 8 0>; linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; }; volume-up { label = "Volume Up"; gpios = <&gpio2 14 0>; linux,code = <115>; /* KEY_VOLUMEUP */ + gpio-key,wakeup; }; volume-down { label = "Volume Down"; gpios = <&gpio2 15 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ + gpio-key,wakeup; }; }; @@ -122,7 +123,6 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; status = "okay"; }; @@ -136,6 +136,7 @@ pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; + bus-width = <8>; status = "okay"; }; @@ -152,7 +153,6 @@ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 - MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 @@ -318,5 +318,6 @@ }; &usbotg { - status = "okay"; + dr_mode = "peripheral"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index 9bbe82bdee41..97ed0816a6e0 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -536,7 +536,7 @@ #define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0 #define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0 #define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0 -#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0 +#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x004 0x0 0xff0d0100 #define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0 #define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0 #define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1 @@ -654,7 +654,7 @@ #define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1 #define MX6QDL_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0 #define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0 -#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x004 0x3 0xff0d0101 #define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0 #define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0 #define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0 diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 3530280f5150..f004913f7d80 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -65,8 +65,10 @@ }; }; -&sata { +&audmux { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; }; &ecspi1 { @@ -83,11 +85,29 @@ }; }; -&ssi1 { - fsl,mode = "i2s-slave"; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; status = "okay"; }; +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -103,28 +123,61 @@ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 >; }; }; }; -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; status = "okay"; }; +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; +}; + &usbh1 { status = "okay"; }; -&fec { +&usbotg { + vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; status = "okay"; }; @@ -145,30 +198,3 @@ vmmc-supply = <®_3p3v>; status = "okay"; }; - -&audmux { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; -}; - -&uart2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 201>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts new file mode 100644 index 000000000000..6e1ccdc019a7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -0,0 +1,39 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" + +/ { + model = "Udoo i.MX6 Quad Board"; + compatible = "udoo,imx6q-udoo", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; + +&sata { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1cbbc5160d27..ff6f1e8f2dd9 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -54,6 +54,7 @@ fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 + MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059 >; }; }; @@ -74,8 +75,10 @@ }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; cd-gpios = <&gpio6 15 0>; wp-gpios = <&gpio1 13 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 39eafc222a2e..e75e11b36dff 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -80,6 +80,14 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + status = "okay"; + }; }; &audmux { @@ -108,6 +116,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; status = "okay"; }; @@ -172,6 +181,7 @@ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 >; }; }; @@ -202,6 +212,12 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_1>; + status = "okay"; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; @@ -229,6 +245,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2_1>; + bus-width = <8>; cd-gpios = <&gpio2 2 0>; wp-gpios = <&gpio2 3 0>; status = "okay"; @@ -237,6 +254,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3_1>; + bus-width = <8>; cd-gpios = <&gpio2 0 0>; wp-gpios = <&gpio2 1 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index a55113e65bcb..35f547929167 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -43,6 +43,13 @@ mux-int-port = <1>; mux-ext-port = <3>; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + }; }; &audmux { @@ -81,6 +88,7 @@ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 >; }; }; @@ -90,6 +98,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 29 0>; + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif_3>; status = "okay"; }; @@ -115,6 +130,14 @@ status = "okay"; }; +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + dr_mode = "peripheral"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1_2>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index ccd55c2fdb67..59154dc15fe4 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -116,6 +116,22 @@ arm,data-latency = <4 2 3>; }; + pcie: pcie@0x01000000 { + compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; + reg = <0x01ffc000 0x4000>; /* DBI */ + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */ + 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <0 123 0x04>; + clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; + clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; + status = "disabled"; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 94 0x04>; @@ -136,8 +152,23 @@ ranges; spdif: spdif@02004000 { + compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + status = "disabled"; }; ecspi1: ecspi@02008000 { @@ -1010,6 +1041,12 @@ MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 >; }; + + pinctrl_spdif_3: spdifgrp-3 { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0 + >; + }; }; uart1 { @@ -1184,6 +1221,36 @@ >; }; + pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */ + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */ + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + >; + }; + pinctrl_usdhc3_2: usdhc3grp-2 { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 2886a590823d..cc68e19c5163 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -17,6 +17,44 @@ memory { reg = <0x80000000 0x40000000>; }; + + regulators { + compatible = "simple-bus"; + + reg_usb_otg1_vbus: usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + }; + + reg_usb_otg2_vbus: usb_otg2_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + }; + }; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 11 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; }; &fec { @@ -38,6 +76,8 @@ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 >; }; }; @@ -49,9 +89,26 @@ status = "okay"; }; -&usdhc1 { +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_1>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1_1>; + pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>; bus-width = <8>; cd-gpios = <&gpio4 7 0>; wp-gpios = <&gpio4 6 0>; @@ -59,16 +116,20 @@ }; &usdhc2 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2_1>; + pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>; cd-gpios = <&gpio5 0 0>; wp-gpios = <&gpio4 29 0>; status = "okay"; }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; cd-gpios = <&gpio3 22 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c46651e4d966..6eabfa12e8c5 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -13,16 +13,20 @@ / { aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; }; cpus { @@ -528,10 +532,26 @@ interrupts = <0 89 0x04>; }; + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6sl-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6sl-iomuxc"; reg = <0x020e0000 0x4000>; + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + >; + }; + }; + fec { pinctrl_fec_1: fecgrp-1 { fsl,pins = < @@ -557,6 +577,64 @@ }; }; + usbotg1 { + pinctrl_usbotg1_1: usbotg1grp-1 { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_2: usbotg1grp-2 { + fsl,pins = < + MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_3: usbotg1grp-3 { + fsl,pins = < + MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_4: usbotg1grp-4 { + fsl,pins = < + MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_5: usbotg1grp-5 { + fsl,pins = < + MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059 + >; + }; + }; + + usbotg2 { + pinctrl_usbotg2_1: usbotg2grp-1 { + fsl,pins = < + MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059 + >; + }; + + pinctrl_usbotg2_2: usbotg2grp-2 { + fsl,pins = < + MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059 + >; + }; + + pinctrl_usbotg2_3: usbotg2grp-3 { + fsl,pins = < + MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059 + >; + }; + + pinctrl_usbotg2_4: usbotg2grp-4 { + fsl,pins = < + MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059 + >; + }; + }; + usdhc1 { pinctrl_usdhc1_1: usdhc1grp-1 { fsl,pins = < @@ -572,6 +650,38 @@ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 >; }; + + pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9 + >; + }; + + }; usdhc2 { @@ -585,6 +695,29 @@ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 >; }; + + pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + }; usdhc3 { @@ -598,6 +731,28 @@ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; + + pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; }; }; @@ -619,7 +774,8 @@ <&clks IMX6SL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin"; + /* imx6sl reuses imx6q sdma firmware */ + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; pxp: pxp@020f0000 { @@ -663,7 +819,7 @@ usbotg2: usb@02184200 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; - interrupts = <0 40 0x04>; + interrupts = <0 42 0x04>; clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; @@ -673,7 +829,7 @@ usbh: usb@02184400 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; - interrupts = <0 42 0x04>; + interrupts = <0 40 0x04>; clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index 72c4b0a0366f..c39dd766c75a 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -19,7 +19,6 @@ compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index 36c411d34926..701c6b6cdaa2 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -19,7 +19,6 @@ compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index c0e2a5879174..053aa20fb30f 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -39,28 +39,6 @@ status = "ok"; }; - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - chip-delay = <25>; - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x500000 0x1fb00000>; - }; - }; - sata@80000 { nr-ports = <2>; status = "okay"; @@ -80,6 +58,28 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + chip-delay = <25>; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x500000 0x1fb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index d544f77a4ca4..aefa375a550d 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -148,44 +148,6 @@ status = "okay"; nr-ports = <2>; }; - - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; regulators { @@ -220,6 +182,44 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 59a2117c35a7..33ff368fbfa5 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -34,26 +34,6 @@ serial@12000 { status = "ok"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x0500000 0xfb00000>; - }; - }; }; gpio-leds { compatible = "gpio-leds"; @@ -91,6 +71,26 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 6f7c7d7ecf2a..a43bebb25110 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -67,31 +67,6 @@ status = "ok"; }; - nand@3000000 { - chip-delay = <40>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "pogoplug"; - reg = <0x0500000 0x2000000>; - }; - - partition@2500000 { - label = "root"; - reg = <0x02500000 0xd800000>; - }; - }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -171,6 +146,32 @@ }; }; +&nand { + chip-delay = <40>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 6548b9dc6855..d30a91a5047d 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -40,26 +40,6 @@ status = "ok"; }; - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x00100000 0x00400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x00500000 0x1fb00000>; - }; - }; - sata@80000 { status = "okay"; nr-ports = <1>; @@ -97,6 +77,26 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x00100000 0x00400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x00500000 0x1fb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index cb711a3bd983..c5fb02f7ebc3 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -5,7 +5,7 @@ / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; @@ -43,6 +43,7 @@ marvell,function = "gpio"; }; }; + serial@12000 { status = "okay"; }; @@ -51,28 +52,6 @@ status = "okay"; nr-ports = <2>; }; - - nand@3000000 { - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x600000>; - }; - - partition@700000 { - label = "root"; - reg = <0x0700000 0xf900000>; - }; - - }; }; gpio_keys { @@ -93,6 +72,7 @@ gpios = <&gpio0 28 1>; }; }; + gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green @@ -113,13 +93,39 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_power_off>; pinctrl-names = "default"; gpios = <&gpio0 24 0>; }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0xe0000>; + }; + partition@e0000 { + label = "u-boot environment"; + reg = <0xe0000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x600000>; + }; + + partition@700000 { + label = "root"; + reg = <0x0700000 0xf900000>; + }; }; @@ -134,6 +140,7 @@ ð0 { status = "okay"; + ethernet0-port@0 { phy-handle = <ðphy0>; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 0323f017eeed..4a62b206f680 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -19,7 +19,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; @@ -83,35 +82,6 @@ serial@12000 { status = "ok"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0xc0000>; - }; - - partition@a0000 { - label = "env"; - reg = <0xa0000 0x20000>; - }; - - partition@100000 { - label = "zImage"; - reg = <0x100000 0x300000>; - }; - - partition@540000 { - label = "initrd"; - reg = <0x540000 0x300000>; - }; - - partition@980000 { - label = "boot"; - reg = <0x980000 0x1f400000>; - }; - }; }; gpio-leds { @@ -180,6 +150,35 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0xc0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + }; + + partition@100000 { + label = "zImage"; + reg = <0x100000 0x300000>; + }; + + partition@540000 { + label = "initrd"; + reg = <0x540000 0x300000>; + }; + + partition@980000 { + label = "boot"; + reg = <0x980000 0x1f400000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index df8447442b37..d15395d671ed 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -113,31 +113,6 @@ status = "ok"; }; - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@a0000 { - label = "env"; - reg = <0xa0000 0x20000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x100000 0x300000>; - }; - - partition@400000 { - label = "uInitrd"; - reg = <0x540000 0x1000000>; - }; - }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -195,6 +170,32 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 6899408482d2..cd44f37e54b5 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -34,13 +34,6 @@ serial@12000 { status = "ok"; }; - - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "ok"; - chip-delay = <25>; - }; }; i2c@0 { @@ -51,6 +44,13 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "ok"; + chip-delay = <25>; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index ce2b94b513db..6c1ec2786e6e 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -17,7 +17,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; @@ -96,37 +95,6 @@ pinctrl-names = "default"; }; - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "env"; - reg = <0x100000 0x80000>; - }; - - partition@180000 { - label = "fdt"; - reg = <0x180000 0x80000>; - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x400000>; - }; - - partition@600000 { - label = "rootfs"; - reg = <0x600000 0x1fa00000>; - }; - }; - rtc@10300 { status = "disabled"; }; @@ -194,6 +162,37 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "fdt"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x600000 0x1fa00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 874857ea9cb8..e6a102cf424c 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -17,7 +17,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; @@ -98,36 +97,6 @@ status = "okay"; }; - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x180000>; - read-only; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x20000>; - }; - - partition@200000 { - label = "uImage"; - reg = <0x0200000 0x600000>; - }; - - partition@800000 { - label = "minirootfs"; - reg = <0x0800000 0x1000000>; - }; - - partition@1800000 { - label = "jffs2"; - reg = <0x1800000 0x6800000>; - }; - }; - sata@80000 { status = "okay"; nr-ports = <2>; @@ -208,6 +177,36 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi index 06267a91de38..e3f915defd3d 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -27,49 +27,6 @@ nr-ports = <2>; }; - nand@3000000 { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; - }; - pcie-controller { status = "okay"; @@ -105,3 +62,46 @@ }; }; }; + +&nand { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 7aeae0c2c1f4..b5418bcaecce 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -15,7 +15,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 85ccf8d8abb1..f0e3d213604c 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -29,43 +29,6 @@ pinctrl-names = "default"; }; - nand@3000000 { - chip-delay = <25>; - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "uboot"; - reg = <0x0 0x90000>; - }; - - partition@90000 { - label = "env"; - reg = <0x90000 0x44000>; - }; - - partition@d4000 { - label = "test"; - reg = <0xd4000 0x24000>; - }; - - partition@f4000 { - label = "conf"; - reg = <0xf4000 0x400000>; - }; - - partition@4f4000 { - label = "linux"; - reg = <0x4f4000 0x1d20000>; - }; - - partition@2214000 { - label = "user"; - reg = <0x2214000 0x1dec000>; - }; - }; - sata@80000 { nr-ports = <1>; status = "okay"; @@ -167,6 +130,43 @@ }; }; +&nand { + chip-delay = <25>; + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x90000>; + }; + + partition@90000 { + label = "env"; + reg = <0x90000 0x44000>; + }; + + partition@d4000 { + label = "test"; + reg = <0xd4000 0x24000>; + }; + + partition@f4000 { + label = "conf"; + reg = <0xf4000 0x400000>; + }; + + partition@4f4000 { + label = "linux"; + reg = <0x4f4000 0x1d20000>; + }; + + partition@2214000 { + label = "user"; + reg = <0x2214000 0x1dec000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 5696b630b70b..1173d7fb31b2 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -48,27 +48,6 @@ pinctrl-names = "default"; status = "okay"; }; - - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x0500000 0x1fb00000>; - }; - }; }; regulators { @@ -92,6 +71,27 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x0500000 0x1fb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 30842b4ff293..320da677b984 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -90,37 +90,6 @@ pinctrl-names = "default"; }; - nand@3000000 { - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x180000>; - }; - - partition@180000 { - label = "u-boot env"; - reg = <0x0180000 0x20000>; - }; - - partition@200000 { - label = "uImage"; - reg = <0x0200000 0x600000>; - }; - - partition@800000 { - label = "uInitrd"; - reg = <0x0800000 0x1000000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0xe800000>; - }; - }; - sata@80000 { status = "okay"; nr-ports = <1>; @@ -204,6 +173,37 @@ }; }; +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 9efcd2dc79d3..345562f75891 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -6,7 +6,6 @@ / { mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 1335b2e1bed4..8b73c80f1dad 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -28,16 +28,43 @@ compatible = "marvell,kirkwood-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; + /* If a board file needs to change this ranges it must replace it completely */ + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */ + MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */ + MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */ + >; controller = <&mbusc>; pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ + + crypto@0301 { + compatible = "marvell,orion-crypto"; + reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, + <MBUS_ID(0x03, 0x01) 0 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + clocks = <&gate_clk 17>; + status = "okay"; + }; + + nand: nand@012f { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + compatible = "marvell,orion-nand"; + reg = <MBUS_ID(0x01, 0x2f) 0 0x400>; + chip-delay = <25>; + /* set partition map and/or chip-delay in board dts */ + clocks = <&gate_clk 7>; + status = "disabled"; + }; }; ocp@f1000000 { compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x0100000 - 0xf4000000 0xf4000000 0x0000400 - 0xf5000000 0xf5000000 0x0000400>; + ranges = <0x00000000 0xf1000000 0x0100000>; #address-cells = <1>; #size-cells = <1>; @@ -193,20 +220,6 @@ status = "okay"; }; - nand@3000000 { - #address-cells = <1>; - #size-cells = <1>; - cle = <0>; - ale = <1>; - bank-width = <1>; - compatible = "marvell,orion-nand"; - reg = <0xf4000000 0x400>; - chip-delay = <25>; - /* set partition map and/or chip-delay in board dts */ - clocks = <&gate_clk 7>; - status = "disabled"; - }; - i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; @@ -218,16 +231,6 @@ status = "disabled"; }; - crypto@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xf5000000 0x800>; - reg-names = "regs", "sram"; - interrupts = <22>; - clocks = <&gate_clk 17>; - status = "okay"; - }; - mdio: mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h new file mode 100644 index 000000000000..c6da987b20cb --- /dev/null +++ b/arch/arm/boot/dts/mxs-pinfunc.h @@ -0,0 +1,31 @@ +/* + * Header providing constants for i.MX28 pinctrl bindings. + * + * Copyright (C) 2013 Lothar Waßmann <[email protected]> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DT_BINDINGS_MXS_PINCTRL_H__ +#define __DT_BINDINGS_MXS_PINCTRL_H__ + +/* fsl,drive-strength property */ +#define MXS_DRIVE_4mA 0 +#define MXS_DRIVE_8mA 1 +#define MXS_DRIVE_12mA 2 +#define MXS_DRIVE_16mA 3 + +/* fsl,voltage property */ +#define MXS_VOLTAGE_LOW 0 +#define MXS_VOLTAGE_HIGH 1 + +/* fsl,pull-up property */ +#define MXS_PULL_DISABLE 0 +#define MXS_PULL_ENABLE 1 + +#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index f444624eb097..9443e93d3cac 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -10,6 +10,7 @@ /dts-v1/; /include/ "r8a73a4.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "APE6EVM"; @@ -24,6 +25,34 @@ reg = <0 0x40000000 0 0x40000000>; }; + vcc_mmc0: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "MMC0 Vcc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pfc 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* Common 3.3V rail, used by several devices on APE6EVM */ + ape6evm_fixed_3v3: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + lbsc { compatible = "simple-bus"; #address-cells = <1>; @@ -33,6 +62,7 @@ }; &i2c5 { + status = "okay"; vdd_dvfs: max8973@1b { compatible = "maxim,max8973"; reg = <0x1b>; @@ -62,4 +92,47 @@ renesas,groups = "scifa0_data"; renesas,function = "scifa0"; }; + + mmc0_pins: mmcif { + renesas,groups = "mmc0_data8", "mmc0_ctrl"; + renesas,function = "mmc0"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + sdhi1_pins: sdhi1 { + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; + renesas,function = "sdhi1"; + }; +}; + +&mmcif0 { + vmmc-supply = <&vcc_mmc0>; + bus-width = <8>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <&vcc_sdhi0>; + bus-width = <4>; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + status = "okay"; +}; + +&sdhi1 { + vmmc-supply = <&ape6evm_fixed_3v3>; + bus-width = <4>; + broken-cd; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 72f867e65791..91436b58016f 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -52,6 +52,7 @@ }; &i2c5 { + status = "okay"; vdd_dvfs: max8973@1b { compatible = "maxim,max8973"; reg = <0x1b>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 658fcc537576..287e047592a0 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -78,6 +78,49 @@ <0 56 4>, <0 57 4>; }; + dmac: dma-multiplexer@0 { + compatible = "renesas,shdma-mux"; + #dma-cells = <1>; + dma-channels = <20>; + dma-requests = <256>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dma0: dma-controller@e6700020 { + compatible = "renesas,shdma-r8a73a4"; + reg = <0 0xe6700020 0 0x89e0>; + interrupt-parent = <&gic>; + interrupts = <0 220 4 + 0 200 4 + 0 201 4 + 0 202 4 + 0 203 4 + 0 204 4 + 0 205 4 + 0 206 4 + 0 207 4 + 0 208 4 + 0 209 4 + 0 210 4 + 0 211 4 + 0 212 4 + 0 213 4 + 0 214 4 + 0 215 4 + 0 216 4 + 0 217 4 + 0 218 4 + 0 219 4>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19"; + }; + }; + thermal@e61f0000 { compatible = "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, @@ -93,6 +136,7 @@ reg = <0 0xe6500000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 174 0x4>; + status = "disabled"; }; i2c1: i2c@e6510000 { @@ -102,6 +146,7 @@ reg = <0 0xe6510000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 175 0x4>; + status = "disabled"; }; i2c2: i2c@e6520000 { @@ -111,6 +156,7 @@ reg = <0 0xe6520000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 176 0x4>; + status = "disabled"; }; i2c3: i2c@e6530000 { @@ -120,6 +166,7 @@ reg = <0 0xe6530000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 177 0x4>; + status = "disabled"; }; i2c4: i2c@e6540000 { @@ -129,6 +176,7 @@ reg = <0 0xe6540000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 178 0x4>; + status = "disabled"; }; i2c5: i2c@e60b0000 { @@ -138,6 +186,7 @@ reg = <0 0xe60b0000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 179 0x4>; + status = "disabled"; }; i2c6: i2c@e6550000 { @@ -147,6 +196,7 @@ reg = <0 0xe6550000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 184 0x4>; + status = "disabled"; }; i2c7: i2c@e6560000 { @@ -156,6 +206,7 @@ reg = <0 0xe6560000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 185 0x4>; + status = "disabled"; }; i2c8: i2c@e6570000 { @@ -165,6 +216,7 @@ reg = <0 0xe6570000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 173 0x4>; + status = "disabled"; }; mmcif0: mmcif@ee200000 { diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index c638e4ab91b8..1c56c5e56950 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -11,6 +11,7 @@ /dts-v1/; /include/ "r8a7740.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "armadillo 800 eva reference"; @@ -34,6 +35,33 @@ regulator-boot-on; }; + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pfc 75 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator@2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sdhi0>; + + enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>; + gpios = <&pfc 17 GPIO_ACTIVE_HIGH>; + states = <3300000 0 + 1800000 1>; + + enable-active-high; + }; + leds { compatible = "gpio-leds"; led1 { @@ -49,9 +77,19 @@ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; }; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; + brightness-levels = <0 1 2 4 8 16 32 64 128 255>; + default-brightness-level = <9>; + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + }; }; &i2c0 { + status = "okay"; touchscreen: st1232@55 { compatible = "sitronix,st1232"; reg = <0x55>; @@ -76,4 +114,44 @@ renesas,groups = "intc_irq10"; renesas,function = "intc"; }; + + backlight_pins: backlight { + renesas,groups = "tpu0_to2_1"; + renesas,function = "tpu0"; + }; + + mmc0_pins: mmc0 { + renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; + renesas,function = "mmc0"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; +}; + +&tpu { + status = "okay"; +}; + +&mmcif0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 44d3d520e01f..ae1e230f711d 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -131,6 +131,7 @@ 0 202 0x4 0 203 0x4 0 204 0x4>; + status = "disabled"; }; i2c1: i2c@e6c20000 { @@ -143,6 +144,7 @@ 0 71 0x4 0 72 0x4 0 73 0x4>; + status = "disabled"; }; pfc: pfc@e6050000 { @@ -159,4 +161,37 @@ status = "disabled"; #pwm-cells = <3>; }; + + mmcif0: mmcif@e6bd0000 { + compatible = "renesas,sh-mmcif"; + reg = <0xe6bd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 56 4 + 0 57 4>; + status = "disabled"; + }; + + sdhi0: sdhi@e6850000 { + compatible = "renesas,sdhi-r8a7740"; + reg = <0xe6850000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 117 4 + 0 118 4 + 0 119 4>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sdhi@e6860000 { + compatible = "renesas,sdhi-r8a7740"; + reg = <0xe6860000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 121 4 + 0 122 4 + 0 123 4>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 9bb903a3230d..969e386e852c 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -22,11 +22,36 @@ compatible = "renesas,bockw-reference", "renesas,r8a7778"; chosen { - bootargs = "console=ttySC0,115200 ignore_loglevel rw"; + bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; }; memory { device_type = "memory"; reg = <0x60000000 0x10000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18300000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18300000 0x1000>; + + phy-mode = "mii"; + interrupt-parent = <&irqpin>; + interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */ + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; + +&irqpin { + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 3577aba82583..a6308a399e2d 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -33,6 +33,25 @@ <0xfe430000 0x100>; }; + /* irqpin: IRQ0 - IRQ3 */ + irqpin: irqpin@fe78001c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + status = "disabled"; /* default off */ + reg = <0xfe78001c 4>, + <0xfe780010 4>, + <0xfe780024 4>, + <0xfe780044 4>, + <0xfe780064 4>; + interrupt-parent = <&gic>; + interrupts = <0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4>; + sense-bitfield-width = <2>; + }; + gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 6d5508392252..ab4110aa3c3b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -42,8 +42,8 @@ pinctrl-names = "default"; phy-mode = "mii"; - interrupt-parent = <&gic>; - interrupts = <0 28 0x4>; + interrupt-parent = <&irqpin0>; + interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */ reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; @@ -63,6 +63,10 @@ }; }; +&irqpin0 { + status = "okay"; +}; + &pfc { pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index ebbe507fcbfa..19faeac3fd2e 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -135,6 +135,7 @@ irqpin0: irqpin@fe780010 { compatible = "renesas,intc-irqpin"; #interrupt-cells = <2>; + status = "disabled"; interrupt-controller; reg = <0xfe78001c 4>, <0xfe780010 4>, @@ -156,6 +157,7 @@ reg = <0xffc70000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 79 0x4>; + status = "disabled"; }; i2c1: i2c@ffc71000 { @@ -165,6 +167,7 @@ reg = <0xffc71000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 82 0x4>; + status = "disabled"; }; i2c2: i2c@ffc72000 { @@ -174,6 +177,7 @@ reg = <0xffc72000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 80 0x4>; + status = "disabled"; }; i2c3: i2c@ffc73000 { @@ -183,6 +187,7 @@ reg = <0xffc73000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 81 0x4>; + status = "disabled"; }; pfc: pfc@fffc0000 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 413b4c29e782..ee845fad939b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -24,6 +24,55 @@ reg = <0>; clock-frequency = <1300000000>; }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1300000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + clock-frequency = <1300000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + clock-frequency = <1300000000>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <780000000>; + }; + + cpu5: cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <780000000>; + }; + + cpu6: cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <780000000>; + }; + + cpu7: cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <780000000>; + }; }; gic: interrupt-controller@f1001000 { @@ -127,6 +176,46 @@ interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; }; + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6508000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 287 0x4>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6518000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 288 0x4>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6530000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 286 0x4>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6540000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 290 0x4>; + status = "disabled"; + }; + mmcif0: mmcif@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi new file mode 100644 index 000000000000..fea5cfef4691 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -0,0 +1,74 @@ +/* + * Device Tree Source for the r8a7791 SoC + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r8a7791"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1300000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1300000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, + <0 1 4>, + <0 2 4>, + <0 3 4>, + <0 12 4>, + <0 13 4>, + <0 14 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>; + }; +}; diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi new file mode 100644 index 000000000000..a7d1c8ec150d --- /dev/null +++ b/arch/arm/boot/dts/s3c6400.dtsi @@ -0,0 +1,41 @@ +/* + * Samsung's S3C6400 SoC device tree source + * + * Copyright (c) 2013 Tomasz Figa <[email protected]> + * + * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "s3c64xx.dtsi" + +/ { + compatible = "samsung,s3c6400"; +}; + +&vic0 { + valid-mask = <0xfffffe1f>; + valid-wakeup-mask = <0x00200004>; +}; + +&vic1 { + valid-mask = <0xffffffff>; + valid-wakeup-mask = <0x53020000>; +}; + +&soc { + clocks: clock-controller@7e00f000 { + compatible = "samsung,s3c6400-clock"; + reg = <0x7e00f000 0x1000>; + #clock-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts new file mode 100644 index 000000000000..57e00f9bce99 --- /dev/null +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -0,0 +1,228 @@ +/* + * Samsung's S3C6410 based Mini6410 board device tree source + * + * Copyright (c) 2013 Tomasz Figa <[email protected]> + * + * Device tree source file for FriendlyARM Mini6410 board which is based on + * Samsung's S3C6410 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "s3c6410.dtsi" + +/ { + model = "FriendlyARM Mini6410 board based on S3C6410"; + compatible = "friendlyarm,mini6410", "samsung,s3c6410"; + + memory { + reg = <0x50000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + fin_pll: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + srom-cs1@18000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x18000000 0x8000000>; + ranges; + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0x18000000 0x2 0x18000004 0x2>; + interrupt-parent = <&gpn>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + davicom,no-eeprom; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + autorepeat; + + button-k1 { + label = "K1"; + gpios = <&gpn 0 GPIO_ACTIVE_LOW>; + linux,code = <2>; + debounce-interval = <20>; + }; + + button-k2 { + label = "K2"; + gpios = <&gpn 1 GPIO_ACTIVE_LOW>; + linux,code = <3>; + debounce-interval = <20>; + }; + + button-k3 { + label = "K3"; + gpios = <&gpn 2 GPIO_ACTIVE_LOW>; + linux,code = <4>; + debounce-interval = <20>; + }; + + button-k4 { + label = "K4"; + gpios = <&gpn 3 GPIO_ACTIVE_LOW>; + linux,code = <5>; + debounce-interval = <20>; + }; + + button-k5 { + label = "K5"; + gpios = <&gpn 4 GPIO_ACTIVE_LOW>; + linux,code = <6>; + debounce-interval = <20>; + }; + + button-k6 { + label = "K6"; + gpios = <&gpn 5 GPIO_ACTIVE_LOW>; + linux,code = <7>; + debounce-interval = <20>; + }; + + button-k7 { + label = "K7"; + gpios = <&gpl 11 GPIO_ACTIVE_LOW>; + linux,code = <8>; + debounce-interval = <20>; + }; + + button-k8 { + label = "K8"; + gpios = <&gpl 12 GPIO_ACTIVE_LOW>; + linux,code = <9>; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds>; + + led-1 { + label = "LED1"; + gpios = <&gpk 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + label = "LED2"; + gpios = <&gpk 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + + led-3 { + label = "LED3"; + gpios = <&gpk 6 GPIO_ACTIVE_LOW>; + }; + + led-4 { + label = "LED4"; + gpios = <&gpk 7 GPIO_ACTIVE_LOW>; + }; + }; + + buzzer { + compatible = "pwm-beeper"; + pwms = <&pwm 0 1000000 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_out>; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&pinctrl0 { + gpio_leds: gpio-leds { + samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + gpio_keys: gpio-keys { + samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3", + "gpn-4", "gpn-5", "gpl-11", "gpl-12"; + samsung,pin-pud = <PIN_PULL_NONE>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; +}; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts new file mode 100644 index 000000000000..ecf35ec466f7 --- /dev/null +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -0,0 +1,103 @@ +/* + * Samsung S3C6410 based SMDK6410 board device tree source. + * + * Copyright (c) 2013 Tomasz Figa <[email protected]> + * + * Device tree source file for SAMSUNG SMDK6410 board which is based on + * Samsung's S3C6410 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "s3c6410.dtsi" + +/ { + model = "SAMSUNG SMDK6410 board based on S3C6410"; + compatible = "samsung,mini6410", "samsung,s3c6410"; + + memory { + reg = <0x50000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + fin_pll: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + srom-cs1@18000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x18000000 0x8000000>; + ranges; + + ethernet@18000000 { + compatible = "smsc,lan9115"; + reg = <0x18000000 0x10000>; + interrupt-parent = <&gpn>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,force-internal-phy; + }; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi new file mode 100644 index 000000000000..eb4226b3407c --- /dev/null +++ b/arch/arm/boot/dts/s3c6410.dtsi @@ -0,0 +1,57 @@ +/* + * Samsung's S3C6410 SoC device tree source + * + * Copyright (c) 2013 Tomasz Figa <[email protected]> + * + * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "s3c64xx.dtsi" + +/ { + compatible = "samsung,s3c6410"; + + aliases { + i2c1 = &i2c1; + }; +}; + +&vic0 { + valid-mask = <0xffffff7f>; + valid-wakeup-mask = <0x00200004>; +}; + +&vic1 { + valid-mask = <0xffffffff>; + valid-wakeup-mask = <0x53020000>; +}; + +&soc { + clocks: clock-controller@7e00f000 { + compatible = "samsung,s3c6410-clock"; + reg = <0x7e00f000 0x1000>; + #clock-cells = <1>; + }; + + i2c1: i2c@7f00f000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x7f00f000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <5>; + clock-names = "i2c"; + clocks = <&clocks PCLK_IIC1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi new file mode 100644 index 000000000000..b1197d8b04de --- /dev/null +++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi @@ -0,0 +1,687 @@ +/* + * Samsung's S3C64xx SoC series common device tree source + * - pin control-related definitions + * + * Copyright (c) 2013 Tomasz Figa <[email protected]> + * + * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are + * listed as device tree nodes in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 2 + +&pinctrl0 { + /* + * Pin banks + */ + + gpa: gpa { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe: gpe { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf: gpf { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg: gpg { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph: gph { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpi: gpi { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj: gpj { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk: gpk { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl: gpl { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm: gpm { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpn: gpn { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpo: gpo { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp: gpp { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpq: gpq { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* + * Pin groups + */ + + uart0_data: uart0-data { + samsung,pins = "gpa-0", "gpa-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa-2", "gpa-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa-4", "gpa-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa-6", "gpa-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ext_dma_0: ext-dma-0 { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ext_dma_1: ext-dma-1 { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + irda_data_0: irda-data-0 { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + irda_data_1: irda-data-1 { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + irda_sdbw: irda-sdbw { + samsung,pins = "gpb-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb-5", "gpb-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + i2c1_bus: i2c1-bus { + /* S3C6410-only */ + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <6>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpc-0", "gpc-1", "gpc-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + spi0_cs: spi0-cs { + samsung,pins = "gpc-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpc-4", "gpc-5", "gpc-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + spi1_cs: spi1-cs { + samsung,pins = "gpc-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpg-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpg-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_bus1: sd0-bus1 { + samsung,pins = "gpg-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_bus4: sd0-bus4 { + samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpg-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gph-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gph-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_bus1: sd1-bus1 { + samsung,pins = "gph-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_bus4: sd1-bus4 { + samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_bus8: sd1-bus8 { + samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5", + "gph-6", "gph-7", "gph-8", "gph-9"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpg-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd2_bus1: sd2-bus1 { + samsung,pins = "gph-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd2_bus4: sd2-bus4 { + samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s0_cdclk: i2s0-cdclk { + samsung,pins = "gpd-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s1_cdclk: i2s1-cdclk { + samsung,pins = "gpe-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s2_bus: i2s2-bus { + /* S3C6410-only */ + samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6", + "gph-8", "gph-9"; + samsung,pin-function = <5>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s2_cdclk: i2s2-cdclk { + /* S3C6410-only */ + samsung,pins = "gph-7"; + samsung,pin-function = <5>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm0_extclk: pcm0-extclk { + samsung,pins = "gpd-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm1_extclk: pcm1-extclk { + samsung,pins = "gpe-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ac97_bus_0: ac97-bus-0 { + samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ac97_bus_1: ac97-bus-1 { + samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + cam_port: cam-port { + samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4", + "gpf-5", "gpf-6", "gpf-7", "gpf-8", + "gpf-9", "gpf-10", "gpf-11", "gpf-12"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + cam_rst: cam-rst { + samsung,pins = "gpf-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + cam_field: cam-field { + /* S3C6410-only */ + samsung,pins = "gpb-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pwm_extclk: pwm-extclk { + samsung,pins = "gpf-13"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpf-14"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpf-15"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + clkout0: clkout-0 { + samsung,pins = "gpf-14"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col0_0: keypad-col0-0 { + samsung,pins = "gph-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col1_0: keypad-col1-0 { + samsung,pins = "gph-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col2_0: keypad-col2-0 { + samsung,pins = "gph-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col3_0: keypad-col3-0 { + samsung,pins = "gph-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col4_0: keypad-col4-0 { + samsung,pins = "gph-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col5_0: keypad-col5-0 { + samsung,pins = "gph-5"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col6_0: keypad-col6-0 { + samsung,pins = "gph-6"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col7_0: keypad-col7-0 { + samsung,pins = "gph-7"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col0_1: keypad-col0-1 { + samsung,pins = "gpl-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col1_1: keypad-col1-1 { + samsung,pins = "gpl-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col2_1: keypad-col2-1 { + samsung,pins = "gpl-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col3_1: keypad-col3-1 { + samsung,pins = "gpl-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col4_1: keypad-col4-1 { + samsung,pins = "gpl-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col5_1: keypad-col5-1 { + samsung,pins = "gpl-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col6_1: keypad-col6-1 { + samsung,pins = "gpl-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col7_1: keypad-col7-1 { + samsung,pins = "gpl-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row0_0: keypad-row0-0 { + samsung,pins = "gpk-8"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row1_0: keypad-row1-0 { + samsung,pins = "gpk-9"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row2_0: keypad-row2-0 { + samsung,pins = "gpk-10"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row3_0: keypad-row3-0 { + samsung,pins = "gpk-11"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row4_0: keypad-row4-0 { + samsung,pins = "gpk-12"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row5_0: keypad-row5-0 { + samsung,pins = "gpk-13"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row6_0: keypad-row6-0 { + samsung,pins = "gpk-14"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row7_0: keypad-row7-0 { + samsung,pins = "gpk-15"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row0_1: keypad-row0-1 { + samsung,pins = "gpn-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row1_1: keypad-row1-1 { + samsung,pins = "gpn-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row2_1: keypad-row2-1 { + samsung,pins = "gpn-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row3_1: keypad-row3-1 { + samsung,pins = "gpn-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row4_1: keypad-row4-1 { + samsung,pins = "gpn-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row5_1: keypad-row5-1 { + samsung,pins = "gpn-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row6_1: keypad-row6-1 { + samsung,pins = "gpn-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row7_1: keypad-row7-1 { + samsung,pins = "gpn-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6", + "gpi-7", "gpi-10", "gpi-11", "gpi-12", + "gpi-13", "gpi-14", "gpi-15", "gpj-3", + "gpj-4", "gpj-5", "gpj-6", "gpj-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5", + "gpi-6", "gpi-7", "gpi-10", "gpi-11", + "gpi-12", "gpi-13", "gpi-14", "gpi-15", + "gpj-2", "gpj-3", "gpj-4", "gpj-5", + "gpj-6", "gpj-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", + "gpi-4", "gpi-5", "gpi-6", "gpi-7", + "gpi-8", "gpi-9", "gpi-10", "gpi-11", + "gpi-12", "gpi-13", "gpi-14", "gpi-15", + "gpj-0", "gpj-1", "gpj-2", "gpj-3", + "gpj-4", "gpj-5", "gpj-6", "gpj-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + hsi_bus: hsi-bus { + samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3", + "gpk-4", "gpk-5", "gpk-6", "gpk-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; +}; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi new file mode 100644 index 000000000000..4e3be4d3493d --- /dev/null +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -0,0 +1,199 @@ +/* + * Samsung's S3C64xx SoC series common device tree source + * + * Copyright (c) 2013 Tomasz Figa <[email protected]> + * + * Samsung's S3C64xx SoC series device nodes are listed in this file. + * Particular SoCs from S3C64xx series can include this file and provide + * values for SoCs specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/samsung,s3c64xx-clock.h> + +/ { + aliases { + i2c0 = &i2c0; + pinctrl0 = &pinctrl0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm1176jzf-s", "arm,arm1176"; + reg = <0x0>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vic0: interrupt-controller@71200000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x71200000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@71300000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x71300000 0x1000>; + #interrupt-cells = <1>; + }; + + sdhci0: sdhci@7c200000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x7c200000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks SCLK_MMC0>; + status = "disabled"; + }; + + sdhci1: sdhci@7c300000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x7c300000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <25>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks SCLK_MMC1>; + status = "disabled"; + }; + + sdhci2: sdhci@7c400000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x7c400000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <17>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>, + <&clocks SCLK_MMC2>; + status = "disabled"; + }; + + watchdog: watchdog@7e004000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x7e004000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + clock-names = "watchdog"; + clocks = <&clocks PCLK_WDT>; + status = "disabled"; + }; + + i2c0: i2c@7f004000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x7f004000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <18>; + clock-names = "i2c"; + clocks = <&clocks PCLK_IIC0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@7f005000 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <5>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + uart1: serial@7f005400 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005400 0x100>; + interrupt-parent = <&vic1>; + interrupts = <6>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + uart2: serial@7f005800 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005800 0x100>; + interrupt-parent = <&vic1>; + interrupts = <7>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + uart3: serial@7f005c00 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005c00 0x100>; + interrupt-parent = <&vic1>; + interrupts = <8>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + pwm: pwm@7f006000 { + compatible = "samsung,s3c6400-pwm"; + reg = <0x7f006000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <23>, <24>, <25>, <27>, <28>; + clock-names = "timers"; + clocks = <&clocks PCLK_PWM>; + samsung,pwm-outputs = <0>, <1>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pinctrl0: pinctrl@7f008000 { + compatible = "samsung,s3c64xx-pinctrl"; + reg = <0x7f008000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <21>; + + pctrl_int_map: pinctrl-interrupt-map { + interrupt-map = <0 &vic0 0>, + <1 &vic0 1>, + <2 &vic1 0>, + <3 &vic1 1>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <1>; + }; + + wakeup-interrupt-controller { + compatible = "samsung,s3c64xx-wakeup-eint"; + interrupts = <0>, <1>, <2>, <3>; + interrupt-parent = <&pctrl_int_map>; + }; + }; + }; +}; + +#include "s3c64xx-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 212230629f27..8ee06dd81799 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -108,6 +108,7 @@ }; &i2c0 { + status = "okay"; as3711@40 { compatible = "ams,as3711"; reg = <0x40>; @@ -183,6 +184,7 @@ &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; + status = "okay"; }; &mmcif { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 3955c7606a6f..fcf26889a8a0 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -135,6 +135,7 @@ 0 168 0x4 0 169 0x4 0 170 0x4>; + status = "disabled"; }; i2c1: i2c@e6822000 { @@ -147,6 +148,7 @@ 0 52 0x4 0 53 0x4 0 54 0x4>; + status = "disabled"; }; i2c2: i2c@e6824000 { @@ -159,6 +161,7 @@ 0 172 0x4 0 173 0x4 0 174 0x4>; + status = "disabled"; }; i2c3: i2c@e6826000 { @@ -171,6 +174,7 @@ 0 184 0x4 0 185 0x4 0 186 0x4>; + status = "disabled"; }; i2c4: i2c@e6828000 { @@ -183,6 +187,7 @@ 0 188 0x4 0 189 0x4 0 190 0x4>; + status = "disabled"; }; mmcif: mmcif@e6bd0000 { diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index e273fa993b8c..6d09b8d42fdd 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -147,7 +147,7 @@ reg = <0x58>; }; - cfg_s2f_usr0_clk: cfg_s2f_usr0_clk { + cfg_h2f_usr0_clk: cfg_h2f_usr0_clk { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; @@ -198,7 +198,7 @@ reg = <0x98>; }; - s2f_usr1_clk: s2f_usr1_clk { + h2f_usr1_clk: h2f_usr1_clk { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; @@ -235,7 +235,7 @@ reg = <0xD0>; }; - s2f_usr2_clk: s2f_usr2_clk { + h2f_usr2_clk: h2f_usr2_clk { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&sdram_pll>; @@ -243,197 +243,197 @@ }; }; - mpu_periph_clk: mpu_periph_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mpuclk>; - fixed-divider = <4>; + mpu_periph_clk: mpu_periph_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <4>; }; - mpu_l2_ram_clk: mpu_l2_ram_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mpuclk>; - fixed-divider = <2>; + mpu_l2_ram_clk: mpu_l2_ram_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <2>; }; - l4_main_clk: l4_main_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; - clk-gate = <0x60 0>; + l4_main_clk: l4_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + clk-gate = <0x60 0>; }; - l3_main_clk: l3_main_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; + l3_main_clk: l3_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; }; - l3_mp_clk: l3_mp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; - div-reg = <0x64 0 2>; - clk-gate = <0x60 1>; + l3_mp_clk: l3_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 0 2>; + clk-gate = <0x60 1>; }; - l3_sp_clk: l3_sp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; - div-reg = <0x64 2 2>; - }; + l3_sp_clk: l3_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 2 2>; + }; - l4_mp_clk: l4_mp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>, <&per_base_clk>; - div-reg = <0x64 4 3>; - clk-gate = <0x60 2>; + l4_mp_clk: l4_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 4 3>; + clk-gate = <0x60 2>; }; - l4_sp_clk: l4_sp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>, <&per_base_clk>; - div-reg = <0x64 7 3>; - clk-gate = <0x60 3>; + l4_sp_clk: l4_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 7 3>; + clk-gate = <0x60 3>; }; - dbg_at_clk: dbg_at_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - div-reg = <0x68 0 2>; - clk-gate = <0x60 4>; + dbg_at_clk: dbg_at_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 0 2>; + clk-gate = <0x60 4>; }; - dbg_clk: dbg_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - div-reg = <0x68 2 2>; - clk-gate = <0x60 5>; + dbg_clk: dbg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 2 2>; + clk-gate = <0x60 5>; }; - dbg_trace_clk: dbg_trace_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - div-reg = <0x6C 0 3>; - clk-gate = <0x60 6>; + dbg_trace_clk: dbg_trace_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x6C 0 3>; + clk-gate = <0x60 6>; }; - dbg_timer_clk: dbg_timer_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - clk-gate = <0x60 7>; + dbg_timer_clk: dbg_timer_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + clk-gate = <0x60 7>; }; - cfg_clk: cfg_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&cfg_s2f_usr0_clk>; - clk-gate = <0x60 8>; + cfg_clk: cfg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_h2f_usr0_clk>; + clk-gate = <0x60 8>; }; - s2f_user0_clk: s2f_user0_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&cfg_s2f_usr0_clk>; - clk-gate = <0x60 9>; + h2f_user0_clk: h2f_user0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_h2f_usr0_clk>; + clk-gate = <0x60 9>; }; - emac_0_clk: emac_0_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&emac0_clk>; - clk-gate = <0xa0 0>; + emac_0_clk: emac_0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac0_clk>; + clk-gate = <0xa0 0>; }; - emac_1_clk: emac_1_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&emac1_clk>; - clk-gate = <0xa0 1>; + emac_1_clk: emac_1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac1_clk>; + clk-gate = <0xa0 1>; }; - usb_mp_clk: usb_mp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 2>; - div-reg = <0xa4 0 3>; + usb_mp_clk: usb_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 2>; + div-reg = <0xa4 0 3>; }; - spi_m_clk: spi_m_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 3>; - div-reg = <0xa4 3 3>; + spi_m_clk: spi_m_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 3>; + div-reg = <0xa4 3 3>; }; - can0_clk: can0_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 4>; - div-reg = <0xa4 6 3>; + can0_clk: can0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 4>; + div-reg = <0xa4 6 3>; }; - can1_clk: can1_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 5>; - div-reg = <0xa4 9 3>; + can1_clk: can1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 5>; + div-reg = <0xa4 9 3>; }; - gpio_db_clk: gpio_db_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 6>; - div-reg = <0xa8 0 24>; + gpio_db_clk: gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 6>; + div-reg = <0xa8 0 24>; }; - s2f_user1_clk: s2f_user1_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&s2f_usr1_clk>; - clk-gate = <0xa0 7>; + h2f_user1_clk: h2f_user1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&h2f_usr1_clk>; + clk-gate = <0xa0 7>; }; - sdmmc_clk: sdmmc_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; - clk-gate = <0xa0 8>; + sdmmc_clk: sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 8>; }; - nand_x_clk: nand_x_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; - clk-gate = <0xa0 9>; + nand_x_clk: nand_x_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 9>; }; - nand_clk: nand_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; - clk-gate = <0xa0 10>; - fixed-divider = <4>; + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 10>; + fixed-divider = <4>; }; - qspi_clk: qspi_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; - clk-gate = <0xa0 11>; + qspi_clk: qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; + clk-gate = <0xa0 11>; }; }; }; @@ -473,6 +473,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xfffec600 0x100>; interrupts = <1 13 0xf04>; + clocks = <&mpu_periph_clk>; }; timer0: timer0@ffc08000 { @@ -516,9 +517,9 @@ }; rstmgr@ffd05000 { - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - }; + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + }; sysmgr@ffd08000 { compatible = "altr,sys-mgr"; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi new file mode 100644 index 000000000000..a85b4043f888 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +/include/ "socfpga.dtsi" + +/ { + soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + + serial0@ffc02000 { + clock-frequency = <100000000>; + }; + + serial1@ffc03000 { + clock-frequency = <100000000>; + }; + + sysmgr@ffd08000 { + cpu1-start-addr = <0xffd080c4>; + }; + + timer0@ffc08000 { + clock-frequency = <100000000>; + }; + + timer1@ffc09000 { + clock-frequency = <100000000>; + }; + + timer2@ffd00000 { + clock-frequency = <25000000>; + }; + + timer3@ffd01000 { + clock-frequency = <25000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts new file mode 100644 index 000000000000..5beffb2265f4 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/include/ "socfpga_arria5.dtsi" + +/ { + model = "Altera SOCFPGA Arria V SoC Development Kit"; + compatible = "altr,socfpga-arria5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + aliases { + /* this allow the ethaddr uboot environmnet variable contents + * to be added to the gmac1 device tree blob. + */ + ethernet0 = &gmac1; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 973999d2c697..a8716f6dbe2e 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -19,26 +19,6 @@ /include/ "socfpga.dtsi" / { - model = "Altera SOCFPGA Cyclone V"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - memory { - name = "memory"; - device_type = "memory"; - reg = <0x0 0x40000000>; /* 1GB */ - }; - - aliases { - /* this allow the ethaddr uboot environmnet variable contents - * to be added to the gmac1 device tree blob. - */ - ethernet0 = &gmac1; - }; - soc { clkmgr@ffd04000 { clocks { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts new file mode 100644 index 000000000000..2ee52ab8cabb --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/include/ "socfpga_cyclone5.dtsi" + +/ { + model = "Altera SOCFPGA Cyclone V SoC Development Kit"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + aliases { + /* this allow the ethaddr uboot environmnet variable contents + * to be added to the gmac1 device tree blob. + */ + ethernet0 = &gmac1; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts new file mode 100644 index 000000000000..50b99a2c12ae --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2013 Steffen Trumtrar <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/include/ "socfpga_cyclone5.dtsi" + +/ { + model = "Terasic SoCkit"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&gmac1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 1c1091eedade..7da99fe497e1 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -10,6 +10,7 @@ */ #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/dbx500-prcmu.h> #include "skeleton.dtsi" / { @@ -42,16 +43,56 @@ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; + + clocks { + compatible = "stericsson,u8500-clks"; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + }; + + mtu@a03c6000 { + /* Nomadik System Timer */ + compatible = "st,nomadik-mtu"; + reg = <0xa03c6000 0x1000>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>; + clock-names = "timclk", "apb_pclk"; + }; + timer@a0410600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xa0410600 0x20>; interrupts = <1 13 0x304>; /* IRQ level high per-CPU */ + + clocks = <&smp_twd_clk>; }; rtc@80154000 { compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&rtc_clk>; + clock-names = "apb_pclk"; }; gpio0: gpio@8012e000 { @@ -65,6 +106,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; + + clocks = <&prcc_pclk 1 9>; }; gpio1: gpio@8012e080 { @@ -78,6 +121,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; + + clocks = <&prcc_pclk 1 9>; }; gpio2: gpio@8000e000 { @@ -91,6 +136,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; + + clocks = <&prcc_pclk 3 8>; }; gpio3: gpio@8000e080 { @@ -104,6 +151,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; + + clocks = <&prcc_pclk 3 8>; }; gpio4: gpio@8000e100 { @@ -117,6 +166,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <4>; + + clocks = <&prcc_pclk 3 8>; }; gpio5: gpio@8000e180 { @@ -130,6 +181,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <5>; + + clocks = <&prcc_pclk 3 8>; }; gpio6: gpio@8011e000 { @@ -143,6 +196,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <6>; + + clocks = <&prcc_pclk 2 11>; }; gpio7: gpio@8011e080 { @@ -156,6 +211,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <7>; + + clocks = <&prcc_pclk 2 11>; }; gpio8: gpio@a03fe000 { @@ -169,6 +226,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; + + clocks = <&prcc_pclk 5 1>; }; pinctrl { @@ -177,8 +236,7 @@ }; usb_per5@a03e0000 { - compatible = "stericsson,db8500-musb", - "mentor,musb"; + compatible = "stericsson,db8500-musb"; reg = <0xa03e0000 0x10000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc"; @@ -210,6 +268,8 @@ "iep_6_14", "oep_6_14", "iep_7_15", "oep_7_15", "iep_8", "oep_8"; + + clocks = <&prcc_pclk 5 0>; }; dma: dma-controller@801C0000 { @@ -220,6 +280,8 @@ #dma-cells = <3>; memcpy-channels = <56 57 58 59 60>; + + clocks = <&prcmu_clk PRCMU_DMACLK>; }; prcmu: prcmu@80157000 { @@ -238,6 +300,13 @@ reg = <0x80157450 0xC>; }; + cpufreq { + compatible = "stericsson,cpufreq-ux500"; + clocks = <&prcmu_clk PRCMU_ARMSS>; + clock-names = "armss"; + status = "disabled"; + }; + thermal@801573c0 { compatible = "stericsson,db8500-thermal"; reg = <0x801573c0 0x40>; @@ -559,65 +628,74 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@80122000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@80128000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@80110000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@8012a000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>; + clock-names = "i2cclk", "apb_pclk"; }; ssp@80002000 { @@ -626,7 +704,80 @@ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; + clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; + clock-names = "ssp0clk", "apb_pclk"; + dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ + <&dma 8 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + ssp@80003000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80003000 0x1000>; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; + clock-names = "ssp1clk", "apb_pclk"; + dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ + <&dma 9 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@8011a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x8011a000 0x1000>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; + clock-names = "spi0clk", "apb_pclk"; + dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ + <&dma 0 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@80112000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80112000 0x1000>; + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; + clock-names = "spi1clk", "apb_pclk"; + dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ + <&dma 35 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@80111000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80111000 0x1000>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; + clock-names = "spi2clk", "apb_pclk"; + dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ + <&dma 33 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@80129000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80129000 0x1000>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; + clock-names = "spi3clk", "apb_pclk"; + dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ + <&dma 40 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; }; uart@80120000 { @@ -638,6 +789,9 @@ <&dma 13 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>; + clock-names = "uart", "apb_pclk"; + status = "disabled"; }; @@ -650,6 +804,9 @@ <&dma 12 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>; + clock-names = "uart", "apb_pclk"; + status = "disabled"; }; @@ -662,6 +819,9 @@ <&dma 11 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>; + clock-names = "uart", "apb_pclk"; + status = "disabled"; }; @@ -674,6 +834,9 @@ <&dma 29 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -686,6 +849,9 @@ <&dma 32 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -698,6 +864,9 @@ <&dma 28 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -705,6 +874,10 @@ compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -717,6 +890,9 @@ <&dma 42 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -724,6 +900,10 @@ compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -732,6 +912,10 @@ reg = <0x80123000 0x1000>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -740,6 +924,10 @@ reg = <0x80124000 0x1000>; interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -749,6 +937,10 @@ reg = <0x80117000 0x1000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -757,6 +949,10 @@ reg = <0x80125000 0x1000>; interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -772,7 +968,7 @@ cpufreq-cooling { compatible = "stericsson,db8500-cpufreq-cooling"; status = "disabled"; - }; + }; vmmci: regulator-gpio { compatible = "regulator-gpio"; @@ -797,6 +993,7 @@ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + clocks = <&prcc_pclk 6 1>; }; hash@a03c2000 { @@ -804,6 +1001,7 @@ reg = <0xa03c2000 0x1000>; v-ape-supply = <&db8500_vape_reg>; + clocks = <&prcc_pclk 6 2>; }; }; }; diff --git a/arch/arm/boot/dts/ste-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 524e33240ad4..76704ec0ffcc 100644 --- a/arch/arm/boot/dts/ste-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -57,7 +57,6 @@ bu21013_tp@5c { compatible = "rohm,bu21013_tp"; reg = <0x5c>; - touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; rohm,touch-max-x = <384>; @@ -68,7 +67,6 @@ bu21013_tp@5d { compatible = "rohm,bu21013_tp"; reg = <0x5d>; - touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; rohm,touch-max-x = <384>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi new file mode 100644 index 000000000000..76d3ef13175f --- /dev/null +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the TVK1281618 UIB + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + soc { + /* Add Synaptics touch screen, TC35892 keypad etc here */ + i2c@80004000 { + tc3589x@44 { + compatible = "tc3589x"; + reg = <0x44>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 370e03f5e7b2..aa3f02060fdd 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -41,28 +41,6 @@ status = "okay"; }; - i2c@80004000 { - tc3589x@42 { - compatible = "tc3589x"; - reg = <0x42>; - interrupt-parent = <&gpio6>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - - interrupt-controller; - #interrupt-cells = <2>; - - tc3589x_gpio: tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - }; - i2c@80128000 { lp5521@33 { compatible = "national,lp5521"; @@ -72,6 +50,7 @@ chan0 { led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + linux,default-trigger = "heartbeat"; }; chan1 { led-cur = /bits/ 8 <0x2f>; @@ -102,7 +81,7 @@ }; bh1780@29 { compatible = "rohm,bh1780gli"; - reg = <0x33>; + reg = <0x29>; }; }; @@ -167,89 +146,11 @@ }; prcmu@80157000 { - db8500-prcmu-regulators { - db8500_vape_reg: db8500_vape { - regulator-name = "db8500-vape"; - }; - - db8500_varm_reg: db8500_varm { - regulator-name = "db8500-varm"; - }; - - db8500_vmodem_reg: db8500_vmodem { - regulator-name = "db8500-vmodem"; - }; - - db8500_vpll_reg: db8500_vpll { - regulator-name = "db8500-vpll"; - }; - - db8500_vsmps1_reg: db8500_vsmps1 { - regulator-name = "db8500-vsmps1"; - }; - - db8500_vsmps2_reg: db8500_vsmps2 { - regulator-name = "db8500-vsmps2"; - }; - - db8500_vsmps3_reg: db8500_vsmps3 { - regulator-name = "db8500-vsmps3"; - }; - - db8500_vrf1_reg: db8500_vrf1 { - regulator-name = "db8500-vrf1"; - }; - - db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-name = "db8500-sva-mmdsp"; - }; - - db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-name = "db8500-sva-mmdsp-ret"; - }; - - db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-name = "db8500_sva_pipe"; - }; - - db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-name = "db8500_sia_mmdsp"; - }; - - db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; - }; - - db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-name = "db8500-sia-pipe"; - }; - - db8500_sga_reg: db8500_sga { - regulator-name = "db8500-sga"; - }; - - db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-name = "db8500-b2r2-mcde"; - }; - - db8500_esram12_reg: db8500_esram12 { - regulator-name = "db8500-esram12"; - }; - - db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-name = "db8500-esram12-ret"; - }; - - db8500_esram34_reg: db8500_esram34 { - regulator-name = "db8500-esram34"; + ab8500 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; }; - db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-name = "db8500-esram34-ret"; - }; - }; - - ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts new file mode 100644 index 000000000000..2b1cb5b584b6 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "ste-hrefprev60.dtsi" +#include "ste-href-stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) and ST UIB"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + soc { + /* Reset line for the BU21013 touchscreen */ + i2c@80110000 { + /* Only one of these will be used */ + bu21013_tp@5c { + touch-gpio = <&gpio2 12 0x4>; + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + bu21013_tp@5d { + touch-gpio = <&gpio2 12 0x4>; + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts new file mode 100644 index 000000000000..59523f866812 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -0,0 +1,19 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "ste-hrefprev60.dtsi" +#include "ste-href-tvk1281618.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; +}; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dtsi index d8d3b99ab007..b2cd7bc2752f 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dts +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -7,17 +7,14 @@ * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the HREF+ prior to the v60 variant. */ -/dts-v1/; #include "ste-dbx5x0.dtsi" #include "ste-href.dtsi" -#include "ste-stuib.dtsi" / { - model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; - compatible = "st-ericsson,mop500", "st-ericsson,u8500"; - gpio_keys { button@1 { gpios = <&tc3589x_gpio 7 0x4>; @@ -25,24 +22,30 @@ }; soc { - prcmu@80157000 { - ab8500@5 { - ab8500-gpio { - compatible = "stericsson,ab8500-gpio"; - }; - }; - }; - i2c@80004000 { tps61052@33 { compatible = "tps61052"; reg = <0x33>; }; - }; - i2c@80110000 { - bu21013_tp@5c { - reset-gpio = <&tc3589x_gpio 13 0x4>; + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts new file mode 100644 index 000000000000..8c6a2de56cf1 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -0,0 +1,36 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the HREF version 60 or later with the ST UIB + */ + +/dts-v1/; +#include "ste-hrefv60plus.dtsi" +#include "ste-href-stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (v60+) and ST UIB"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + soc { + /* Reset line for the BU21013 touchscreen */ + i2c@80110000 { + /* Only one of these will be used */ + bu21013_tp@5c { + touch-gpio = <&gpio2 20 0x4>; + reset-gpio = <&gpio4 17 0x4>; + }; + bu21013_tp@5d { + touch-gpio = <&gpio2 20 0x4>; + reset-gpio = <&gpio4 17 0x4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts new file mode 100644 index 000000000000..d53cccdce776 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -0,0 +1,21 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the HREF version 60 or later with the TVK1281618 UIB + */ + +/dts-v1/; +#include "ste-hrefv60plus.dtsi" +#include "ste-href-tvk1281618.dtsi" + +/ { + model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; +}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dts b/arch/arm/boot/dts/ste-hrefv60plus.dts deleted file mode 100644 index 6e52ebbf113f..000000000000 --- a/arch/arm/boot/dts/ste-hrefv60plus.dts +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "ste-dbx5x0.dtsi" -#include "ste-href.dtsi" -#include "ste-stuib.dtsi" - -/ { - model = "ST-Ericsson HREF (v60+) platform with Device Tree"; - compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - - gpio_keys { - button@1 { - gpios = <&gpio6 25 0x4>; - }; - }; - - soc { - i2c@80110000 { - bu21013_tp@0x5c { - reset-gpio = <&gpio4 15 0x4>; - }; - }; - - // External Micro SD slot - sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - - cd-gpios = <&tc3589x_gpio 3 0x4>; - - status = "okay"; - }; - - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - - status = "okay"; - }; - - // PoP:ed eMMC - sdi2_per3@80005000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - - status = "okay"; - }; - - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux2_reg>; - - status = "okay"; - }; - - prcmu@80157000 { - db8500-prcmu-regulators { - db8500_vape_reg: db8500_vape { - regulator-name = "db8500-vape"; - }; - - db8500_varm_reg: db8500_varm { - regulator-name = "db8500-varm"; - }; - - db8500_vmodem_reg: db8500_vmodem { - regulator-name = "db8500-vmodem"; - }; - - db8500_vpll_reg: db8500_vpll { - regulator-name = "db8500-vpll"; - }; - - db8500_vsmps1_reg: db8500_vsmps1 { - regulator-name = "db8500-vsmps1"; - }; - - db8500_vsmps2_reg: db8500_vsmps2 { - regulator-name = "db8500-vsmps2"; - }; - - db8500_vsmps3_reg: db8500_vsmps3 { - regulator-name = "db8500-vsmps3"; - }; - - db8500_vrf1_reg: db8500_vrf1 { - regulator-name = "db8500-vrf1"; - }; - - db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-name = "db8500-sva-mmdsp"; - }; - - db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-name = "db8500-sva-mmdsp-ret"; - }; - - db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-name = "db8500_sva_pipe"; - }; - - db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-name = "db8500_sia_mmdsp"; - }; - - db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; - }; - - db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-name = "db8500-sia-pipe"; - }; - - db8500_sga_reg: db8500_sga { - regulator-name = "db8500-sga"; - }; - - db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-name = "db8500-b2r2-mcde"; - }; - - db8500_esram12_reg: db8500_esram12 { - regulator-name = "db8500-esram12"; - }; - - db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-name = "db8500-esram12-ret"; - }; - - db8500_esram34_reg: db8500_esram34 { - regulator-name = "db8500-esram34"; - }; - - db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-name = "db8500-esram34-ret"; - }; - }; - - ab8500 { - ab8500-regulators { - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-name = "V-DISPLAY"; - }; - - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-name = "V-eMMC1"; - }; - - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-name = "V-MMC-SD"; - }; - - ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - regulator-name = "V-INTCORE"; - }; - - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-name = "V-TVOUT"; - }; - - ab8500_ldo_usb_reg: ab8500_ldo_usb { - regulator-name = "dummy"; - }; - - ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-name = "V-AUD"; - }; - - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-name = "V-AMIC1"; - }; - - ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - regulator-name = "V-AMIC2"; - }; - - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-name = "V-DMIC"; - }; - - ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-name = "V-CSI/DSI"; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi new file mode 100644 index 000000000000..aed511b47a9e --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -0,0 +1,70 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "ste-dbx5x0.dtsi" +#include "ste-href.dtsi" + +/ { + model = "ST-Ericsson HREF (v60+) platform with Device Tree"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + gpio_keys { + button@1 { + gpios = <&gpio5 25 0x4>; + }; + }; + + soc { + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio2 31 0x4>; // 95 + + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + + status = "okay"; + }; + + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index f1fc128e249d..f0b39f835914 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -111,12 +111,13 @@ vdd33a-supply = <&en_3v3_reg>; vddvario-supply = <&db8500_vape_reg>; - reg-shift = <1>; reg-io-width = <2>; smsc,force-internal-phy; smsc,irq-active-high; smsc,irq-push-pull; + + clocks = <&prcc_pclk 3 0>; }; }; @@ -170,86 +171,8 @@ }; prcmu@80157000 { - db8500-prcmu-regulators { - db8500_vape_reg: db8500_vape { - regulator-name = "db8500-vape"; - }; - - db8500_varm_reg: db8500_varm { - regulator-name = "db8500-varm"; - }; - - db8500_vmodem_reg: db8500_vmodem { - regulator-name = "db8500-vmodem"; - }; - - db8500_vpll_reg: db8500_vpll { - regulator-name = "db8500-vpll"; - }; - - db8500_vsmps1_reg: db8500_vsmps1 { - regulator-name = "db8500-vsmps1"; - }; - - db8500_vsmps2_reg: db8500_vsmps2 { - regulator-name = "db8500-vsmps2"; - }; - - db8500_vsmps3_reg: db8500_vsmps3 { - regulator-name = "db8500-vsmps3"; - }; - - db8500_vrf1_reg: db8500_vrf1 { - regulator-name = "db8500-vrf1"; - }; - - db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-name = "db8500-sva-mmdsp"; - }; - - db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-name = "db8500-sva-mmdsp-ret"; - }; - - db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-name = "db8500_sva_pipe"; - }; - - db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-name = "db8500_sia_mmdsp"; - }; - - db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; - }; - - db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-name = "db8500-sia-pipe"; - }; - - db8500_sga_reg: db8500_sga { - regulator-name = "db8500-sga"; - }; - - db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-name = "db8500-b2r2-mcde"; - }; - - db8500_esram12_reg: db8500_esram12 { - regulator-name = "db8500-esram12"; - }; - - db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-name = "db8500-esram12-ret"; - }; - - db8500_esram34_reg: db8500_esram34 { - regulator-name = "db8500-esram34"; - }; - - db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-name = "db8500-esram34-ret"; - }; + cpufreq { + status = "okay"; }; thermal@801573c0 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index c32770a28acf..319cc6b509da 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -266,6 +266,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-sid"; + reg = <0x01c23800 0x10>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 3b4a0574f068..52476742a104 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -255,6 +255,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-sid"; + reg = <0x01c23800 0x10>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f6091dc0936c..ce8ef2a45be0 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -222,6 +222,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-sid"; + reg = <0x01c23800 0x10>; + }; + uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index f244f5f02365..c1751a64889a 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -175,7 +175,7 @@ apb2_gates: apb2_gates@01c2006c { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-apb2-gates-clk"; - reg = <0x01c2006c 0x8>; + reg = <0x01c2006c 0x4>; clocks = <&apb2>; clock-output-names = "apb2_i2c0", "apb2_i2c1", "apb2_i2c2", "apb2_i2c3", "apb2_uart0", diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 15e625eca312..5c51cb8a98b0 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -48,6 +48,18 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts new file mode 100644 index 000000000000..8a1009d6c829 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -0,0 +1,63 @@ +/* + * Copyright 2013 Oliver Schinagl + * + * Oliver Schinagl <[email protected]> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" + +/ { + model = "Cubietech Cubietruck"; + compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; + + soc@01c00000 { + pinctrl@01c20800 { + led_pins_cubietruck: led_pins@0 { + allwinner,pins = "PH7", "PH11", "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cubietruck>; + + blue { + label = "cubietruck:blue:usr"; + gpios = <&pio 7 21 0>; + }; + + orange { + label = "cubietruck:orange:usr"; + gpios = <&pio 7 20 0>; + }; + + white { + label = "cubietruck:white:usr"; + gpios = <&pio 7 11 0>; + }; + + green { + label = "cubietruck:green:usr"; + gpios = <&pio 7 7 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 9e778557fadb..ead3013f9aca 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -60,6 +60,24 @@ pinctrl-0 = <&uart7_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 80559cbdbc87..e46cfedde74c 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -215,6 +215,27 @@ allwinner,pull = <0>; }; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -244,6 +265,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -324,6 +350,51 @@ status = "disabled"; }; + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 7 1>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 8 1>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 9 1>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@01c2b800 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b800 0x400>; + interrupts = <0 88 1>; + clocks = <&apb1_gates 3>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c4: i2c@01c2bc00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2bc00 0x400>; + interrupts = <0 89 1>; + clocks = <&apb1_gates 15>; + clock-frequency = <100000>; + status = "disabled"; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 60230288884b..cb5ec23b03a7 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra114.dtsi" / { @@ -738,6 +739,14 @@ realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&palmas_ldo6_reg>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + }; }; i2c@7000d000 { @@ -947,7 +956,7 @@ regulator-max-microvolt = <1800000>; }; - ldo6 { + palmas_ldo6_reg: ldo6 { regulator-name = "vdd-sensor-2v85"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; @@ -1011,6 +1020,19 @@ interrupt-parent = <&palmas>; interrupts = <8 0>; }; + + pinmux { + compatible = "ti,tps65913-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_default>; + + palmas_default: pinmux { + pin_gpio6 { + pins = "gpio6"; + function = "gpio"; + }; + }; + }; }; }; @@ -1081,26 +1103,26 @@ home { label = "Home"; gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; - linux,code = <102>; /* KEY_HOME */ + linux,code = <KEY_HOME>; }; power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; volume_down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ + linux,code = <KEY_VOLUMEDOWN>; }; volume_up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; - linux,code = <115>; /* KEY_VOLUMEUP */ + linux,code = <KEY_VOLUMEUP>; }; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts new file mode 100644 index 000000000000..431d67a2b413 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -0,0 +1,27 @@ +/dts-v1/; + +#include "tegra124.dtsi" + +/ { + model = "NVIDIA Tegra124 Venice2"; + compatible = "nvidia,venice2", "nvidia,tegra124"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + serial@70006000 { + status = "okay"; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; +}; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi new file mode 100644 index 000000000000..b7413004ee77 --- /dev/null +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -0,0 +1,149 @@ +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra124"; + interrupt-parent = <&gic>; + + gic: interrupt-controller@50041000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x50041000 0x1000>, + <0x50042000 0x1000>, + <0x50044000 0x2000>, + <0x50046000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer@60005000 { + compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; + reg = <0x60005000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio: gpio@6000d000 { + compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". + */ + serial@70006000 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006040 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006040 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006200 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006200 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006300 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006300 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006400 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006400 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + rtc@7000e000 { + compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmc@7000e400 { + compatible = "nvidia,tegra124-pmc"; + reg = <0x7000e400 0x400>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index e19dbf238e5c..5ea7dfa4d9fa 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -294,9 +294,10 @@ }; }; - nct1008 { + temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; + vcc-supply = <&sys_3v3_reg>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 0022c127e1d9..2bd55cfd88ad 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -136,12 +136,13 @@ gr3d { compatible = "nvidia,tegra30-gr3d"; reg = <0x54180000 0x00040000>; - clocks = <&tegra_car 24 &tegra_car 98>; + clocks = <&tegra_car TEGRA30_CLK_GR3D + &tegra_car TEGRA30_CLK_GR3D2>; clock-names = "3d", "3d2"; }; dc@54200000 { - compatible = "nvidia,tegra30-dc"; + compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc"; reg = <0x54200000 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_DISP1>, diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts new file mode 100644 index 000000000000..c42e4f938dcd --- /dev/null +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -0,0 +1,47 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Copyright 2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "PHYTEC Cosmic/Cosmic+ Board"; + compatible = "phytec,vf610-cosmic", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP1,115200"; + }; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks { + enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1_1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 1a58678b93fa..c8047ca16501 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -36,6 +36,23 @@ }; +&dspi0 { + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0_1>; + status = "okay"; + + sflash: at26df081a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at26df081a"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + &fec0 { phy-mode = "rmii"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 67d929cf9804..d31ce1b4a7b0 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -123,6 +123,18 @@ status = "disabled"; }; + dspi0: dspi0@4002c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002c000 0x1000>; + interrupts = <0 67 0x04>; + clocks = <&clks VF610_CLK_DSPI0>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + status = "disabled"; + }; + sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index a0025dc13021..ac632cc38f24 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,4 +1,3 @@ -CONFIG_HIGHMEM=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ=y @@ -16,6 +15,9 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y @@ -68,8 +70,8 @@ CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y -CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_GPIO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y @@ -78,10 +80,8 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y CONFIG_USB=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_UX500=y -CONFIG_USB_PHY=y CONFIG_AB8500_USB=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y @@ -116,12 +116,12 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_CRYPTO_DEV_UX500=y diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index c7d670d11802..2d895a297739 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -169,6 +169,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 82d3ad8e87cf..f087b5f22425 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -92,7 +92,6 @@ static void __init kirkwood_dt_init(void) writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); BUG_ON(mvebu_mbus_dt_init()); - kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 98f6e2adb53e..c0ceb17649fa 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -332,6 +332,11 @@ static void __init crystalfontz_init(void) update_fec_mac_prop(OUI_CRYSTALFONTZ); } +static void __init m28cu3_init(void) +{ + update_fec_mac_prop(OUI_DENX); +} + static const char __init *mxs_get_soc_id(void) { struct device_node *np; @@ -459,6 +464,8 @@ static void __init mxs_machine_init(void) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10036")) crystalfontz_init(); + else if (of_machine_is_compatible("msr,m28cu3")) + m28cu3_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 041da5172423..bd14e3a37128 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -306,3 +306,19 @@ config MACH_WLF_CRAGG_6410 select SAMSUNG_GPIO_EXTRA128 help Machine support for the Wolfson Cragganmore S3C6410 variant. + +config MACH_S3C64XX_DT + bool "Samsung S3C6400/S3C6410 machine using Device Tree" + select CLKSRC_OF + select CPU_S3C6400 + select CPU_S3C6410 + select PINCTRL + select PINCTRL_S3C64XX + select USE_OF + help + Machine support for Samsung S3C6400/S3C6410 machines with Device Tree + enabled. + Select this if a fdt blob is available for your S3C64XX SoC based + board. + Note: This is under development and not all peripherals can be + supported with this machine file. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 31d0c9101272..6faedcffce04 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -12,7 +12,7 @@ obj- := # Core -obj-y += common.o clock.o +obj-y += common.o # Core support @@ -57,3 +57,4 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o +obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c deleted file mode 100644 index c1bcc4a6d3a8..000000000000 --- a/arch/arm/mach-s3c64xx/clock.c +++ /dev/null @@ -1,1007 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/clock.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <[email protected]> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX Base clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pll.h> - -#include "regs-sys.h" - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * ext_xtal_mux for want of an actual name from the manual. -*/ - -static struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", -}; - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux - -#define clk_fout_mpll clk_mpll -#define clk_fout_epll clk_epll - -struct clk clk_h2 = { - .name = "hclk2", - .rate = 0, -}; - -struct clk clk_27m = { - .name = "clk_27m", - .rate = 27000000, -}; - -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S3C64XX_OTHERS); - if (enable) - val |= S3C64XX_OTHERS_USBMASK; - else - val &= ~S3C64XX_OTHERS_USBMASK; - - __raw_writel(val, S3C64XX_OTHERS); - local_irq_restore(flags); - - return 0; -} - -struct clk clk_48m = { - .name = "clk_48m", - .rate = 48000000, - .enable = clk_48m_ctrl, -}; - -struct clk clk_xusbxti = { - .name = "xusbxti", - .rate = 48000000, -}; - -static int inline s3c64xx_gate(void __iomem *reg, - struct clk *clk, - int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); -} - -static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); -} - -int s3c64xx_sclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); -} - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_RTC, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_I2C1, - }, { - .name = "keypad", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, - }, { - .name = "spi", - .devname = "s3c6410-spi.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .devname = "s3c6410-spi.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI1, - }, { - .name = "48m", - .devname = "s3c-sdhci.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.2", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - }, { - .name = "cfcon", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_IHOST, - }, { - .name = "dma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA0, - }, { - .name = "dma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA1, - }, { - .name = "3dse", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_3DSE, - }, { - .name = "hclk_secur", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SECUR, - }, { - .name = "sdma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA1, - }, { - .name = "sdma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA0, - }, { - .name = "hclk_jpeg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_JPEG, - }, { - .name = "camif", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_CAMIF, - }, { - .name = "hclk_scaler", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SCALER, - }, { - .name = "2d", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_2D, - }, { - .name = "tv", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_TV, - }, { - .name = "post0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_POST0, - }, { - .name = "rot", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_ROT, - }, { - .name = "hclk_mfc", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_MFC, - }, { - .name = "pclk_mfc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_MFC, - }, { - .name = "dac27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_DAC27, - }, { - .name = "tv27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_TV27, - }, { - .name = "scaler27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER27, - }, { - .name = "sclk_scaler", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER, - }, { - .name = "post0_27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_POST0_27, - }, { - .name = "secur", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SECUR, - }, { - .name = "sclk_mfc", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MFC, - }, { - .name = "sclk_jpeg", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_JPEG, - }, -}; - -static struct clk clk_48m_spi0 = { - .name = "spi_48m", - .devname = "s3c6410-spi.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, -}; - -static struct clk clk_48m_spi1 = { - .name = "spi_48m", - .devname = "s3c6410-spi.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS0, -}; - -static struct clk clk_i2s1 = { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk clk_i2s2 = { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, -}; -#endif - -static struct clk init_clocks[] = { - { - .name = "lcd", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_LCD, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_UHOST, - }, { - .name = "otg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_USB, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_PWM, - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART3, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, -}; - -static struct clk clk_hsmmc0 = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, -}; - -static struct clk clk_hsmmc1 = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, -}; - -static struct clk clk_hsmmc2 = { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, -}; - -static struct clk clk_fout_apll = { - .name = "fout_apll", -}; - -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -static struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, - .sources = &clk_src_apll, -}; - -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -static struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, - .sources = &clk_src_epll, -}; - -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, - .sources = &clk_src_mpll, -}; - -static unsigned int armclk_mask; - -static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; - - return rate / (clkdiv + 1); -} - -static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - - if (parent < rate) - return parent; - - div = (parent / rate) - 1; - if (div > armclk_mask) - div = armclk_mask; - - return parent / (div + 1); -} - -static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - u32 val; - - if (rate < parent / (armclk_mask + 1)) - return -EINVAL; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - - val = __raw_readl(S3C_CLK_DIV0); - val &= ~armclk_mask; - val |= (div - 1); - __raw_writel(val, S3C_CLK_DIV0); - - return 0; - -} - -static struct clk clk_arm = { - .name = "armclk", - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c64xx_clk_arm_get_rate, - .set_rate = s3c64xx_clk_arm_set_rate, - .round_rate = s3c64xx_clk_arm_round_rate, - }, -}; - -static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) - rate /= 2; - - return rate; -} - -static struct clk_ops clk_dout_ops = { - .get_rate = s3c64xx_clk_doutmpll_get_rate, -}; - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", - .parent = &clk_mout_mpll.clk, - .ops = &clk_dout_ops, -}; - -static struct clk *clkset_spi_mmc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_27m, -}; - -static struct clksrc_sources clkset_spi_mmc = { - .sources = clkset_spi_mmc_list, - .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), -}; - -static struct clk *clkset_irda_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - &clk_27m, -}; - -static struct clksrc_sources clkset_irda = { - .sources = clkset_irda_list, - .nr_sources = ARRAY_SIZE(clkset_irda_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - NULL -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_uhost_list[] = { - &clk_48m, - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_uhost = { - .sources = clkset_uhost_list, - .nr_sources = ARRAY_SIZE(clkset_uhost_list), -}; - -/* The peripheral clocks are all controlled via clocksource followed - * by an optional divider and gate stage. We currently roll this into - * one clock which hides the intermediate clock from the mux. - * - * Note, the JPEG clock can only be an even divider... - * - * The scaler and LCD clocks depend on the S3C64XX version, and also - * have a common parent divisor so are not included here. - */ - -/* clocks that feed other parts of the clock source tree */ - -static struct clk clk_iis_cd0 = { - .name = "iis_cdclk0", -}; - -static struct clk clk_iis_cd1 = { - .name = "iis_cdclk1", -}; - -static struct clk clk_iisv4_cd = { - .name = "iis_cdclk_v4", -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", -}; - -static struct clk *clkset_audio0_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd0, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio0 = { - .sources = clkset_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_audio0_list), -}; - -static struct clk *clkset_audio1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd1, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio1 = { - .sources = clkset_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_audio1_list), -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk *clkset_audio2_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iisv4_cd, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio2 = { - .sources = clkset_audio2_list, - .nr_sources = ARRAY_SIZE(clkset_audio2_list), -}; -#endif - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "usb-bus-host", - .ctrlbit = S3C_CLKCON_SCLK_UHOST, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 }, - .sources = &clkset_uhost, - }, { - .clk = { - .name = "irda-bus", - .ctrlbit = S3C_CLKCON_SCLK_IRDA, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 }, - .sources = &clkset_irda, - }, { - .clk = { - .name = "camera", - .ctrlbit = S3C_CLKCON_SCLK_CAM, - .enable = s3c64xx_sclk_ctrl, - .parent = &clk_h2, - }, - .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, - }, -}; - -/* Where does UCLK0 come from? */ -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, - .sources = &clkset_uart, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.0", - .ctrlbit = S3C_CLKCON_SCLK_MMC0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.1", - .ctrlbit = S3C_CLKCON_SCLK_MMC1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.2", - .ctrlbit = S3C_CLKCON_SCLK_MMC2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.0", - .ctrlbit = S3C_CLKCON_SCLK_SPI0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.1", - .ctrlbit = S3C_CLKCON_SCLK_SPI1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_audio_bus0 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.0", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, - .sources = &clkset_audio0, -}; - -static struct clksrc_clk clk_audio_bus1 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.1", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, - .sources = &clkset_audio1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clksrc_clk clk_audio_bus2 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.2", - .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 }, - .sources = &clkset_audio2, -}; -#endif -/* Clock initialisation code */ - -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_audio_bus0, - &clk_audio_bus1, -}; - -static struct clk *clk_cdev[] = { - &clk_hsmmc0, - &clk_hsmmc1, - &clk_hsmmc2, - &clk_48m_spi0, - &clk_48m_spi1, - &clk_i2s0, - &clk_i2s1, -}; - -static struct clk_lookup s3c64xx_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk), -#ifdef CONFIG_CPU_S3C6410 - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk), -#endif -}; - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -void __init_or_cpufreq s3c64xx_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk2; - unsigned long pclk; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - u32 clkdiv0; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S3C_CLK_DIV0); - printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - /* For now assume the mux always selects the crystal */ - clk_ext_xtal_mux.parent = xtal_clk; - - epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); - mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); - apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); - - fclk = mpll; - - printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", - apll, mpll, epll); - - if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) - /* Synchronous mode */ - hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - else - /* Asynchronous mode */ - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - - hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); - pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); - - printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", - hclk2, hclk, pclk); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - clk_h2.rate = hclk2; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks1[] __initdata = { - &clk_ext_xtal_mux, - &clk_iis_cd0, - &clk_iis_cd1, - &clk_iisv4_cd, - &clk_pcm_cd, - &clk_mout_epll.clk, - &clk_mout_mpll.clk, - &clk_dout_mpll, - &clk_arm, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_27m, - &clk_48m, - &clk_h2, - &clk_xusbxti, -}; - -/** - * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410 - * @xtal: The rate for the clock crystal feeding the PLLs. - * @armclk_divlimit: Divisor mask for ARMCLK. - * - * Register the clocks for the S3C6400 and S3C6410 SoC range, such - * as ARMCLK as well as the necessary parent clocks. - * - * This call does not setup the clocks, which is left to the - * s3c64xx_setup_clocks() call which may be needed by the cpufreq - * or resume code to re-set the clocks if the bootloader has changed - * them. - */ -void __init s3c64xx_register_clocks(unsigned long xtal, - unsigned armclk_divlimit) -{ - unsigned int cnt; - - armclk_mask = armclk_divlimit; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) - s3c_register_clksrc(clksrc_cdev[cnt], 1); - clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); -} diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 73d79cf5e141..7a3ce4c39e5f 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -14,9 +14,14 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/clk-provider.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> @@ -38,7 +43,6 @@ #include <mach/regs-gpio.h> #include <plat/cpu.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/pm.h> #include <plat/gpio-cfg.h> @@ -50,6 +54,19 @@ #include "common.h" +/* External clock frequency */ +static unsigned long xtal_f = 12000000, xusbxti_f = 48000000; + +void __init s3c64xx_set_xtal_freq(unsigned long freq) +{ + xtal_f = freq; +} + +void __init s3c64xx_set_xusbxti_freq(unsigned long freq) +{ + xusbxti_f = freq; +} + /* uart registration process */ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) @@ -67,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6400_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, - .init_clocks = s3c6400_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6400_init, .name = name_s3c6400, @@ -75,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6410_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, - .init_clocks = s3c6410_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6410_init, .name = name_s3c6410, @@ -192,6 +207,10 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) static __init int s3c64xx_dev_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + subsys_system_register(&s3c64xx_subsys, NULL); return device_register(&s3c64xx_dev); } @@ -213,8 +232,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { /* * FIXME: there is no better place to put this at the moment - * (samsung_wdt_reset_init needs clocks) + * (s3c64xx_clk_init needs ioremap and must happen before init_time + * samsung_wdt_reset_init needs clocks) */ + s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS); samsung_wdt_reset_init(S3C_VA_WATCHDOG); printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); @@ -391,6 +412,10 @@ static int __init s3c64xx_init_irq_eint(void) { int irq; + /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */ + if (of_have_populated_dt()) + return -ENODEV; + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index e8f990b37665..bd3bd562011e 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -22,21 +22,21 @@ void s3c64xx_init_irq(u32 vic0, u32 vic1); void s3c64xx_init_io(struct map_desc *mach_desc, int size); -void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); -void s3c64xx_setup_clocks(void); - void s3c64xx_restart(enum reboot_mode mode, const char *cmd); void s3c64xx_init_late(void); +void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, + unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base); +void s3c64xx_set_xtal_freq(unsigned long freq); +void s3c64xx_set_xusbxti_freq(unsigned long freq); + #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); extern void s3c6400_init_irq(void); extern void s3c6400_map_io(void); -extern void s3c6400_init_clocks(int xtal); #else -#define s3c6400_init_clocks NULL #define s3c6400_map_io NULL #define s3c6400_init NULL #endif @@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal); extern int s3c6410_init(void); extern void s3c6410_init_irq(void); extern void s3c6410_map_io(void); -extern void s3c6410_init_clocks(int xtal); #else -#define s3c6410_init_clocks NULL #define s3c6410_map_io NULL #define s3c6410_init NULL #endif diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 759846c28d12..7e22c2113816 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -12,6 +12,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -24,6 +28,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/amba/pl080.h> +#include <linux/of.h> #include <mach/dma.h> #include <mach/map.h> @@ -677,7 +682,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, goto err_map; } - clk_enable(dmac->clk); + clk_prepare_enable(dmac->clk); dmac->regs = regs; dmac->chanbase = chbase; @@ -711,7 +716,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, return 0; err_clk: - clk_disable(dmac->clk); + clk_disable_unprepare(dmac->clk); clk_put(dmac->clk); err_map: iounmap(regs); @@ -726,6 +731,10 @@ static int __init s3c64xx_dma_init(void) { int ret; + /* This driver is not supported when booting with device tree. */ + if (of_have_populated_dt()) + return -ENODEV; + printk(KERN_INFO "%s: Registering DMA channels\n", __func__); dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h index 05332b998ec0..4f44aac77092 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -15,145 +15,21 @@ #ifndef __PLAT_REGS_CLOCK_H #define __PLAT_REGS_CLOCK_H __FILE__ +/* + * FIXME: Remove remaining definitions + */ + #define S3C_CLKREG(x) (S3C_VA_SYS + (x)) -#define S3C_APLL_LOCK S3C_CLKREG(0x00) -#define S3C_MPLL_LOCK S3C_CLKREG(0x04) -#define S3C_EPLL_LOCK S3C_CLKREG(0x08) -#define S3C_APLL_CON S3C_CLKREG(0x0C) -#define S3C_MPLL_CON S3C_CLKREG(0x10) -#define S3C_EPLL_CON0 S3C_CLKREG(0x14) -#define S3C_EPLL_CON1 S3C_CLKREG(0x18) -#define S3C_CLK_SRC S3C_CLKREG(0x1C) -#define S3C_CLK_DIV0 S3C_CLKREG(0x20) -#define S3C_CLK_DIV1 S3C_CLKREG(0x24) -#define S3C_CLK_DIV2 S3C_CLKREG(0x28) -#define S3C_CLK_OUT S3C_CLKREG(0x2C) -#define S3C_HCLK_GATE S3C_CLKREG(0x30) #define S3C_PCLK_GATE S3C_CLKREG(0x34) -#define S3C_SCLK_GATE S3C_CLKREG(0x38) -#define S3C_MEM0_GATE S3C_CLKREG(0x3C) #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C) #define S3C_MEM_SYS_CFG S3C_CLKREG(0x120) -/* CLKDIV0 */ -#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) -#define S3C6400_CLKDIV0_PCLK_SHIFT (12) -#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) -#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) -#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) -#define S3C6400_CLKDIV0_HCLK_SHIFT (8) -#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S3C6400_CLKDIV0_MPLL_SHIFT (4) - -#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) -#define S3C6400_CLKDIV0_ARM_SHIFT (0) - -/* HCLK GATE Registers */ -#define S3C_CLKCON_HCLK_3DSE (1<<31) -#define S3C_CLKCON_HCLK_UHOST (1<<29) -#define S3C_CLKCON_HCLK_SECUR (1<<28) -#define S3C_CLKCON_HCLK_SDMA1 (1<<27) -#define S3C_CLKCON_HCLK_SDMA0 (1<<26) -#define S3C_CLKCON_HCLK_IROM (1<<25) -#define S3C_CLKCON_HCLK_DDR1 (1<<24) -#define S3C_CLKCON_HCLK_DDR0 (1<<23) -#define S3C_CLKCON_HCLK_MEM1 (1<<22) -#define S3C_CLKCON_HCLK_MEM0 (1<<21) -#define S3C_CLKCON_HCLK_USB (1<<20) -#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) -#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) -#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) -#define S3C_CLKCON_HCLK_MDP (1<<16) -#define S3C_CLKCON_HCLK_DHOST (1<<15) -#define S3C_CLKCON_HCLK_IHOST (1<<14) -#define S3C_CLKCON_HCLK_DMA1 (1<<13) -#define S3C_CLKCON_HCLK_DMA0 (1<<12) -#define S3C_CLKCON_HCLK_JPEG (1<<11) -#define S3C_CLKCON_HCLK_CAMIF (1<<10) -#define S3C_CLKCON_HCLK_SCALER (1<<9) -#define S3C_CLKCON_HCLK_2D (1<<8) -#define S3C_CLKCON_HCLK_TV (1<<7) -#define S3C_CLKCON_HCLK_POST0 (1<<5) -#define S3C_CLKCON_HCLK_ROT (1<<4) -#define S3C_CLKCON_HCLK_LCD (1<<3) -#define S3C_CLKCON_HCLK_TZIC (1<<2) -#define S3C_CLKCON_HCLK_INTC (1<<1) -#define S3C_CLKCON_HCLK_MFC (1<<0) - /* PCLK GATE Registers */ -#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) -#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) -#define S3C_CLKCON_PCLK_SKEY (1<<24) -#define S3C_CLKCON_PCLK_CHIPID (1<<23) -#define S3C_CLKCON_PCLK_SPI1 (1<<22) -#define S3C_CLKCON_PCLK_SPI0 (1<<21) -#define S3C_CLKCON_PCLK_HSIRX (1<<20) -#define S3C_CLKCON_PCLK_HSITX (1<<19) -#define S3C_CLKCON_PCLK_GPIO (1<<18) -#define S3C_CLKCON_PCLK_IIC (1<<17) -#define S3C_CLKCON_PCLK_IIS1 (1<<16) -#define S3C_CLKCON_PCLK_IIS0 (1<<15) -#define S3C_CLKCON_PCLK_AC97 (1<<14) -#define S3C_CLKCON_PCLK_TZPC (1<<13) -#define S3C_CLKCON_PCLK_TSADC (1<<12) -#define S3C_CLKCON_PCLK_KEYPAD (1<<11) -#define S3C_CLKCON_PCLK_IRDA (1<<10) -#define S3C_CLKCON_PCLK_PCM1 (1<<9) -#define S3C_CLKCON_PCLK_PCM0 (1<<8) -#define S3C_CLKCON_PCLK_PWM (1<<7) -#define S3C_CLKCON_PCLK_RTC (1<<6) -#define S3C_CLKCON_PCLK_WDT (1<<5) #define S3C_CLKCON_PCLK_UART3 (1<<4) #define S3C_CLKCON_PCLK_UART2 (1<<3) #define S3C_CLKCON_PCLK_UART1 (1<<2) #define S3C_CLKCON_PCLK_UART0 (1<<1) -#define S3C_CLKCON_PCLK_MFC (1<<0) - -/* SCLK GATE Registers */ -#define S3C_CLKCON_SCLK_UHOST (1<<30) -#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) -#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) -#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) -#define S3C_CLKCON_SCLK_MMC2 (1<<26) -#define S3C_CLKCON_SCLK_MMC1 (1<<25) -#define S3C_CLKCON_SCLK_MMC0 (1<<24) -#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) -#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) -#define S3C_CLKCON_SCLK_SPI1 (1<<21) -#define S3C_CLKCON_SCLK_SPI0 (1<<20) -#define S3C_CLKCON_SCLK_DAC27 (1<<19) -#define S3C_CLKCON_SCLK_TV27 (1<<18) -#define S3C_CLKCON_SCLK_SCALER27 (1<<17) -#define S3C_CLKCON_SCLK_SCALER (1<<16) -#define S3C_CLKCON_SCLK_LCD27 (1<<15) -#define S3C_CLKCON_SCLK_LCD (1<<14) -#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) -#define S3C6410_CLKCON_FIMC (1<<13) -#define S3C_CLKCON_SCLK_POST0_27 (1<<12) -#define S3C6400_CLKCON_SCLK_POST1 (1<<11) -#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) -#define S3C_CLKCON_SCLK_POST0 (1<<10) -#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) -#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) -#define S3C_CLKCON_SCLK_SECUR (1<<7) -#define S3C_CLKCON_SCLK_IRDA (1<<6) -#define S3C_CLKCON_SCLK_UART (1<<5) -#define S3C_CLKCON_SCLK_ONENAND (1<<4) -#define S3C_CLKCON_SCLK_MFC (1<<3) -#define S3C_CLKCON_SCLK_CAM (1<<2) -#define S3C_CLKCON_SCLK_JPEG (1<<1) - -/* CLKSRC */ - -#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) -#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) -#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) -#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) -#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) -#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) -#define S3C6400_CLKSRC_MFC (1 << 4) /* MEM_SYS_CFG */ #define MEM_SYS_CFG_INDEP_CF 0x4000 diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index c3da1b68d03e..1649c0d1c1b8 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -12,12 +12,17 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/map.h> @@ -101,6 +106,10 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = { static __init int s3c64xx_syscore_init(void) { + /* Appropriate drivers (pinctrl, uart) handle this when using DT. */ + if (of_have_populated_dt()) + return 0; + register_syscore_ops(&s3c64xx_irq_syscore_ops); return 0; diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 35e3f54574ef..d266dd5f7060 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = { static void __init anw6410_map_io(void) { s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index eb8e5a1aca42..1a911df9e451 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -743,7 +743,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = { static void __init crag6410_map_io(void) { s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index f39569e0f2e6..e8064044ef79 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -247,7 +247,7 @@ static struct platform_device *hmt_devices[] __initdata = { static void __init hmt_map_io(void) { s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index fc043e3ecdf8..58d46a3d7b78 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -231,7 +231,7 @@ static void __init mini6410_map_io(void) u32 tmp; s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 7e2c3908f1f8..2067b0bf55b4 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {}; static void __init ncp_map_io(void) { s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c new file mode 100644 index 000000000000..7eb9a10fc1af --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -0,0 +1,85 @@ +/* + * Samsung's S3C64XX flattened device tree enabled machine + * + * Copyright (c) 2013 Tomasz Figa <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clk-provider.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> + +#include <plat/cpu.h> +#include <plat/watchdog-reset.h> + +#include <mach/map.h> + +#include "common.h" + +/* + * IO mapping for shared system controller IP. + * + * FIXME: Make remaining drivers use dynamic mapping. + */ +static struct map_desc s3c64xx_dt_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init s3c64xx_dt_map_io(void) +{ + debug_ll_io_init(); + iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc)); + + s3c64xx_init_cpu(); + + if (!soc_is_s3c64xx()) + panic("SoC is not S3C64xx!"); +} + +static void __init s3c64xx_dt_init_irq(void) +{ + of_clk_init(NULL); + samsung_wdt_reset_of_init(); + irqchip_init(); +}; + +static void __init s3c64xx_dt_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode != REBOOT_SOFT) + samsung_wdt_reset(); + + /* if all else fails, or mode was for soft, jump to 0 */ + soft_restart(0); +} + +static char const *s3c64xx_dt_compat[] __initdata = { + "samsung,s3c6400", + "samsung,s3c6410", + NULL +}; + +DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)") + /* Maintainer: Tomasz Figa <[email protected]> */ + .dt_compat = s3c64xx_dt_compat, + .map_io = s3c64xx_dt_map_io, + .init_irq = s3c64xx_dt_init_irq, + .init_machine = s3c64xx_dt_init_machine, + .restart = s3c64xx_dt_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 86d980b448fd..0f47237be3b2 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -337,13 +337,6 @@ err: return ret; } -static int __init smartq_usb_otg_init(void) -{ - clk_xusbxti.rate = 12000000; - - return 0; -} - static int __init smartq_wifi_init(void) { int ret; @@ -377,7 +370,8 @@ static struct map_desc smartq_iodesc[] __initdata = {}; void __init smartq_map_io(void) { s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); + s3c64xx_set_xusbxti_freq(12000000); s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -399,7 +393,6 @@ void __init smartq_machine_init(void) WARN_ON(smartq_lcd_setup_gpio()); WARN_ON(smartq_power_off_init()); WARN_ON(smartq_usb_host_init()); - WARN_ON(smartq_usb_otg_init()); WARN_ON(smartq_wifi_init()); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index d70c0843aea2..27381cfcabbe 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {}; static void __init smdk6400_map_io(void) { s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d90b450c5645..2a7b32ca5c96 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -634,7 +634,7 @@ static void __init smdk6410_map_io(void) u32 tmp; s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 6a1f91fea678..8cdb824a3b43 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear) #endif static struct sleep_save core_save[] = { - SAVE_ITEM(S3C_APLL_LOCK), - SAVE_ITEM(S3C_MPLL_LOCK), - SAVE_ITEM(S3C_EPLL_LOCK), - SAVE_ITEM(S3C_CLK_SRC), - SAVE_ITEM(S3C_CLK_DIV0), - SAVE_ITEM(S3C_CLK_DIV1), - SAVE_ITEM(S3C_CLK_DIV2), - SAVE_ITEM(S3C_CLK_OUT), - SAVE_ITEM(S3C_HCLK_GATE), - SAVE_ITEM(S3C_PCLK_GATE), - SAVE_ITEM(S3C_SCLK_GATE), - SAVE_ITEM(S3C_MEM0_GATE), - - SAVE_ITEM(S3C_EPLL_CON1), - SAVE_ITEM(S3C_EPLL_CON0), - SAVE_ITEM(S3C64XX_MEM0DRVCON), SAVE_ITEM(S3C64XX_MEM1DRVCON), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C_APLL_CON), - SAVE_ITEM(S3C_MPLL_CON), -#endif }; static struct sleep_save misc_save[] = { diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 4869714c6f1b..3db0c98222f7 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -9,6 +9,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -20,6 +24,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -58,12 +63,6 @@ void __init s3c6400_map_io(void) s3c64xx_onenand1_setname("s3c6400-onenand"); } -void __init s3c6400_init_clocks(int xtal) -{ - s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6400_init_irq(void) { /* VIC0 does not have IRQS 5..7, @@ -82,6 +81,10 @@ static struct device s3c6400_dev = { static int __init s3c6400_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6400_subsys, NULL); } diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 31c29fdf1800..72b2278953a8 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -10,6 +10,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -21,6 +25,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -62,13 +67,6 @@ void __init s3c6410_map_io(void) s3c_cfcon_setname("s3c64xx-pata"); } -void __init s3c6410_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6410_init_irq(void) { /* VIC0 is missing IRQ7, VIC1 is fully populated. */ @@ -86,6 +84,10 @@ static struct device s3c6410_dev = { static int __init s3c6410_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6410_subsys, NULL); } diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 1f94c310c477..b45240512ce0 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -101,6 +101,12 @@ config ARCH_R8A7790 select SH_CLK_CPG select RENESAS_IRQC +config ARCH_R8A7791 + bool "R-Car M2 (R8A77910)" + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + config ARCH_EMEV2 bool "Emma Mobile EV2" select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 2705bfa8c113..228193cc9a38 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o # Clock objects @@ -27,6 +28,7 @@ obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o endif diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index c4bf2d8fb111..fb6af83858e3 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -69,6 +69,15 @@ static struct clk extal_clk = { .mapping = &cpg_mapping, }; +static struct clk audio_clk_a = { +}; + +static struct clk audio_clk_b = { +}; + +static struct clk audio_clk_c = { +}; + /* * clock ratio of these clock will be updated * on r8a7778_clock_init() @@ -100,18 +109,23 @@ static struct clk *main_clks[] = { &p_clk, &g_clk, &z_clk, + &audio_clk_a, + &audio_clk_b, + &audio_clk_c, }; enum { MSTP331, MSTP323, MSTP322, MSTP321, + MSTP311, MSTP310, + MSTP309, MSTP308, MSTP307, MSTP114, MSTP110, MSTP109, MSTP100, MSTP030, MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, - MSTP016, MSTP015, - MSTP007, + MSTP016, MSTP015, MSTP012, MSTP011, MSTP010, + MSTP009, MSTP008, MSTP007, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { @@ -119,6 +133,11 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */ [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ + [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */ + [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */ + [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */ + [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */ + [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */ [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ [MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */ [MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */ @@ -135,11 +154,20 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */ [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */ [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */ + [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */ + [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */ + [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ + [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ + [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ [MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */ }; static struct clk_lookup lookups[] = { /* main */ + CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), + CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), + CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), + CLKDEV_CON_ID("audio_clk_internal", &s1_clk), CLKDEV_CON_ID("shyway_clk", &s_clk), CLKDEV_CON_ID("peripheral_clk", &p_clk), @@ -153,6 +181,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */ CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ + CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ @@ -168,6 +197,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ + CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */ + + CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]), + CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]), + CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]), + CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]), + CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]), + CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]), + CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), + CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), + CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), }; void __init r8a7778_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index bd6ad922eb7e..1f7080fab0a5 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -200,7 +200,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */ - CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */ + CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */ }; void __init r8a7779_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index fc36d3db0b4d..d99b87bc76ea 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -182,7 +182,7 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { MSTP813, - MSTP721, MSTP720, + MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720, MSTP717, MSTP716, MSTP522, MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304, @@ -193,6 +193,11 @@ enum { static struct clk mstp_clks[MSTP_NR] = { [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */ + [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */ + [MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */ + [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */ + [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */ + [MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */ [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */ @@ -251,6 +256,11 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("ssprs", &div6_clks[DIV6_SSPRS]), /* MSTP */ + CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]), + CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]), + CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]), + CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]), + CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]), CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c new file mode 100644 index 000000000000..c9a26f16ce5b --- /dev/null +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -0,0 +1,237 @@ +/* + * r8a7791 clock framework support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/sh_clk.h> +#include <linux/clkdev.h> +#include <mach/clock.h> +#include <mach/common.h> + +/* + * MD EXTAL PLL0 PLL1 PLL3 + * 14 13 19 (MHz) *1 *1 + *--------------------------------------------------- + * 0 0 0 15 x 1 x172/2 x208/2 x106 + * 0 0 1 15 x 1 x172/2 x208/2 x88 + * 0 1 0 20 x 1 x130/2 x156/2 x80 + * 0 1 1 20 x 1 x130/2 x156/2 x66 + * 1 0 0 26 / 2 x200/2 x240/2 x122 + * 1 0 1 26 / 2 x200/2 x240/2 x102 + * 1 1 0 30 / 2 x172/2 x208/2 x106 + * 1 1 1 30 / 2 x172/2 x208/2 x88 + * + * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2) + * see "p1 / 2" on R8A7791_CLOCK_ROOT() below + */ + +#define MD(nr) (1 << nr) + +#define CPG_BASE 0xe6150000 +#define CPG_LEN 0x1000 + +#define SMSTPCR0 0xE6150130 +#define SMSTPCR1 0xE6150134 +#define SMSTPCR2 0xe6150138 +#define SMSTPCR3 0xE615013C +#define SMSTPCR5 0xE6150144 +#define SMSTPCR7 0xe615014c +#define SMSTPCR8 0xE6150990 +#define SMSTPCR9 0xE6150994 +#define SMSTPCR10 0xE6150998 +#define SMSTPCR11 0xE615099C + +#define MODEMR 0xE6160060 +#define SDCKCR 0xE6150074 +#define SD2CKCR 0xE6150078 +#define SD3CKCR 0xE615007C +#define MMC0CKCR 0xE6150240 +#define MMC1CKCR 0xE6150244 +#define SSPCKCR 0xE6150248 +#define SSPRSCKCR 0xE615024C + +static struct clk_mapping cpg_mapping = { + .phys = CPG_BASE, + .len = CPG_LEN, +}; + +static struct clk extal_clk = { + /* .rate will be updated on r8a7791_clock_init() */ + .mapping = &cpg_mapping, +}; + +static struct sh_clk_ops followparent_clk_ops = { + .recalc = followparent_recalc, +}; + +static struct clk main_clk = { + /* .parent will be set r8a73a4_clock_init */ + .ops = &followparent_clk_ops, +}; + +/* + * clock ratio of these clock will be updated + * on r8a7791_clock_init() + */ +SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1); + +/* fixed ratio clock */ +SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2); +SH_FIXED_RATIO_CLK_SET(cp_clk, extal_clk, 1, 2); + +SH_FIXED_RATIO_CLK_SET(pll1_div2_clk, pll1_clk, 1, 2); +SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12); +SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24); +SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024)); +SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15); + +static struct clk *main_clks[] = { + &extal_clk, + &extal_div2_clk, + &main_clk, + &pll1_clk, + &pll1_div2_clk, + &pll3_clk, + &hp_clk, + &p_clk, + &rclk_clk, + &mp_clk, + &cp_clk, +}; + +/* MSTP */ +enum { + MSTP721, MSTP720, + MSTP719, MSTP718, MSTP715, MSTP714, + MSTP216, MSTP207, MSTP206, + MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107, + MSTP124, + MSTP_NR +}; + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ + [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ + [MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */ + [MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */ + [MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */ + [MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */ + [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ + [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ + [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */ + [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */ + [MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */ + [MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */ + [MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */ + [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */ +}; + +static struct clk_lookup lookups[] = { + + /* main clocks */ + CLKDEV_CON_ID("extal", &extal_clk), + CLKDEV_CON_ID("extal_div2", &extal_div2_clk), + CLKDEV_CON_ID("main", &main_clk), + CLKDEV_CON_ID("pll1", &pll1_clk), + CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk), + CLKDEV_CON_ID("pll3", &pll3_clk), + CLKDEV_CON_ID("hp", &hp_clk), + CLKDEV_CON_ID("p", &p_clk), + CLKDEV_CON_ID("rclk", &rclk_clk), + CLKDEV_CON_ID("mp", &mp_clk), + CLKDEV_CON_ID("cp", &cp_clk), + CLKDEV_CON_ID("peripheral_clk", &hp_clk), + + /* MSTP */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */ + CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */ + CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */ + CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */ + CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */ + CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */ + CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */ + CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */ + CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */ + CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), +}; + +#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \ + extal_clk.rate = e * 1000 * 1000; \ + main_clk.parent = m; \ + SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1); \ + if (mode & MD(19)) \ + SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1); \ + else \ + SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1) + + +void __init r8a7791_clock_init(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); + u32 mode; + int k, ret = 0; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + switch (mode & (MD(14) | MD(13))) { + case 0: + R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); + break; + case MD(13): + R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66); + break; + case MD(14): + R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102); + break; + case MD(13) | MD(14): + R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88); + break; + } + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + shmobile_clk_init(); + else + goto epanic; + + return; + +epanic: + panic("failed to setup r8a7791 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index adfcf51b163d..ea1dca6880f4 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -35,4 +35,6 @@ extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); extern void r8a7778_pinmux_init(void); +extern int r8a7778_usb_phy_power(bool enable); + #endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h new file mode 100644 index 000000000000..2e6d66131083 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -0,0 +1,8 @@ +#ifndef __ASM_R8A7791_H__ +#define __ASM_R8A7791_H__ + +void r8a7791_add_dt_devices(void); +void r8a7791_clock_init(void); +void r8a7791_init_early(void); + +#endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 6a2657ebd197..e484d1420a01 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -95,29 +95,46 @@ static struct sh_timer_config sh_tmu1_platform_data __initdata = { &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) -/* USB */ -static struct usb_phy *phy; +int r8a7778_usb_phy_power(bool enable) +{ + static struct usb_phy *phy = NULL; + int ret = 0; + + if (!phy) + phy = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(phy)) { + pr_err("kernel doesn't have usb phy driver\n"); + return PTR_ERR(phy); + } + + if (enable) + ret = usb_phy_init(phy); + else + usb_phy_shutdown(phy); + return ret; +} + +/* USB */ static int usb_power_on(struct platform_device *pdev) { - if (IS_ERR(phy)) - return PTR_ERR(phy); + int ret = r8a7778_usb_phy_power(true); + + if (ret) + return ret; pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); - usb_phy_init(phy); - return 0; } static void usb_power_off(struct platform_device *pdev) { - if (IS_ERR(phy)) + if (r8a7778_usb_phy_power(false)) return; - usb_phy_shutdown(phy); - pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); } @@ -353,8 +370,6 @@ void __init r8a7778_add_standard_devices(void) void __init r8a7778_init_late(void) { - phy = usb_get_phy(USB_PHY_TYPE_USB2); - platform_device_register_full(&ehci_info); platform_device_register_full(&ohci_info); } diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c new file mode 100644 index 000000000000..b56399d2e1de --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -0,0 +1,149 @@ +/* + * r8a7791 processor support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/serial_sci.h> +#include <linux/sh_timer.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/r8a7791.h> +#include <asm/mach/arch.h> + +#define SCIF_COMMON(scif_type, baseaddr, irq) \ + .type = scif_type, \ + .mapbase = baseaddr, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .irqs = SCIx_IRQ_MUXED(irq) + +#define SCIFA_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +#define SCIFB_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +#define SCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIF, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_2, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +#define HSCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_HSCIF, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_6, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1, + SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 }; + +static const struct plat_sci_port scif[] __initconst = { + SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */ + SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */ + SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */ + SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */ + SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */ + SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */ + SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */ + SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */ + SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */ + SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */ + SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */ + SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */ + SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */ + SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */ + SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */ +}; + +static inline void r8a7791_register_scif(int idx) +{ + platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx], + sizeof(struct plat_sci_port)); +} + +static const struct sh_timer_config cmt00_platform_data __initconst = { + .name = "CMT00", + .timer_bit = 0, + .clockevent_rating = 80, +}; + +static const struct resource cmt00_resources[] __initconst = { + DEFINE_RES_MEM(0xffca0510, 0x0c), + DEFINE_RES_MEM(0xffca0500, 0x04), + DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +}; + +#define r8a7791_register_cmt(idx) \ + platform_device_register_resndata(&platform_bus, "sh_cmt", \ + idx, cmt##idx##_resources, \ + ARRAY_SIZE(cmt##idx##_resources), \ + &cmt##idx##_platform_data, \ + sizeof(struct sh_timer_config)) + +void __init r8a7791_add_dt_devices(void) +{ + r8a7791_register_scif(SCIFA0); + r8a7791_register_scif(SCIFA1); + r8a7791_register_scif(SCIFB0); + r8a7791_register_scif(SCIFB1); + r8a7791_register_scif(SCIFB2); + r8a7791_register_scif(SCIFA2); + r8a7791_register_scif(SCIF0); + r8a7791_register_scif(SCIF1); + r8a7791_register_scif(SCIF2); + r8a7791_register_scif(SCIF3); + r8a7791_register_scif(SCIF4); + r8a7791_register_scif(SCIF5); + r8a7791_register_scif(SCIFA3); + r8a7791_register_scif(SCIFA4); + r8a7791_register_scif(SCIFA5); + r8a7791_register_cmt(00); +} + +void __init r8a7791_init_early(void) +{ +#ifndef CONFIG_ARM_ARCH_TIMER + shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ +#endif +} + +#ifdef CONFIG_USE_OF +static const char *r8a7791_boards_compat_dt[] __initdata = { + "renesas,r8a7791", + NULL, +}; + +DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") + .init_early = r8a7791_init_early, + .dt_compat = r8a7791_boards_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index fe1f3e26b88b..616b96e86ad4 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,14 +2,11 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o devices.o devices-common.o \ - id.o usb.o timer.o pm.o +obj-y := cpu.o devices.o id.o timer.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ - board-mop500-uib.o board-mop500-stuib.o \ - board-mop500-u8500uib.o \ board-mop500-pins.o \ board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index ec0807247e60..154e15f59702 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -68,40 +68,6 @@ static struct stedma40_chan_cfg msp2_dma_tx = { .phy_channel = 1, }; -static struct platform_device *db8500_add_msp_i2s(struct device *parent, - int id, - resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) -{ - struct platform_device *pdev; - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", - id, irq); - pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); - if (!pdev) { - pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", - id); - return NULL; - } - - return pdev; -} - -/* Platform device for ASoC MOP500 machine */ -static struct platform_device snd_soc_mop500 = { - .name = "snd-soc-mop500", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - struct msp_i2s_platform_data msp2_platform_data = { .id = MSP_I2S_2, .msp_i2s_dma_rx = &msp2_dma_rx, @@ -113,19 +79,3 @@ struct msp_i2s_platform_data msp3_platform_data = { .msp_i2s_dma_rx = &msp1_dma_rx, .msp_i2s_dma_tx = NULL, }; - -void mop500_audio_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); - platform_device_register(&snd_soc_mop500); - - pr_info("Initialize MSP I2S-devices.\n"); - db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, - &msp0_platform_data); - db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, - &msp1_platform_data); - db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, - &msp2_platform_data); - db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, - &msp3_platform_data); -} diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index b3e61a38e5c8..26600a1c5319 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -65,18 +65,6 @@ struct mmci_platform_data mop500_sdi0_data = { #endif }; -static void sdi0_configure(struct device *parent) -{ - /* Add the device, force v2 to subrevision 1 */ - db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); -} - -void mop500_sdi_tc35892_init(struct device *parent) -{ - mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; - sdi0_configure(parent); -} - /* * SDI1 (SDIO WLAN) */ @@ -178,42 +166,3 @@ struct mmci_platform_data mop500_sdi4_data = { .dma_tx_param = &mop500_sdi4_dma_cfg_tx, #endif }; - -void __init mop500_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - - /* - * On boards with the TC35892 GPIO expander, sdi0 will finally - * be added when the TC35892 initializes and calls - * mop500_sdi_tc35892_init() above. - */ -} - -void __init snowball_sdi_init(struct device *parent) -{ - /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ - mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; - mop500_sdi0_data.cd_invert = true; - sdi0_configure(parent); -} - -void __init hrefv60_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_configure(parent); - /* WLAN SDIO channel */ - db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); -} diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c deleted file mode 100644 index 7e1f294f0434..000000000000 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mfd/stmpe.h> -#include <linux/input/bu21013.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/input/matrix_keypad.h> -#include <asm/mach-types.h> - -#include "board-mop500.h" - -/* STMPE/SKE keypad use this key layout */ -static const unsigned int mop500_keymap[] = { - KEY(2, 5, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(3, 5, KEY_VOLUMEDOWN), - KEY(1, 3, KEY_3), - KEY(5, 2, KEY_RIGHT), - KEY(5, 0, KEY_9), - - KEY(0, 5, KEY_MENU), - KEY(7, 6, KEY_ENTER), - KEY(4, 5, KEY_0), - KEY(6, 7, KEY_2), - KEY(3, 4, KEY_UP), - KEY(3, 3, KEY_DOWN), - - KEY(6, 4, KEY_SEND), - KEY(6, 2, KEY_BACK), - KEY(4, 2, KEY_VOLUMEUP), - KEY(5, 5, KEY_1), - KEY(4, 3, KEY_LEFT), - KEY(3, 2, KEY_7), -}; - -static const struct matrix_keymap_data mop500_keymap_data = { - .keymap = mop500_keymap, - .keymap_size = ARRAY_SIZE(mop500_keymap), -}; -/* - * STMPE1601 - */ -static struct stmpe_keypad_platform_data stmpe1601_keypad_data = { - .debounce_ms = 64, - .scan_count = 8, - .no_autorepeat = true, - .keymap_data = &mop500_keymap_data, -}; - -static struct stmpe_platform_data stmpe1601_data = { - .id = 1, - .blocks = STMPE_BLOCK_KEYPAD, - .irq_trigger = IRQF_TRIGGER_FALLING, - .irq_base = MOP500_STMPE1601_IRQ(0), - .keypad = &stmpe1601_keypad_data, - .autosleep = true, - .autosleep_timeout = 1024, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = { - { - I2C_BOARD_INFO("stmpe1601", 0x40), - .irq = NOMADIK_GPIO_TO_IRQ(218), - .platform_data = &stmpe1601_data, - .flags = I2C_CLIENT_WAKE, - }, -}; - -/* - * BU21013 ROHM touchscreen interface on the STUIBs - */ - -#define TOUCH_GPIO_PIN 84 - -#define TOUCH_XMAX 384 -#define TOUCH_YMAX 704 - -#define PRCMU_CLOCK_OCR 0x1CC -#define TSC_EXT_CLOCK_9_6MHZ 0x840000 - -static struct bu21013_platform_device tsc_plat_device = { - .touch_pin = TOUCH_GPIO_PIN, - .touch_x_max = TOUCH_XMAX, - .touch_y_max = TOUCH_YMAX, - .ext_clk = false, - .x_flip = false, - .y_flip = true, -}; - -static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { - { - I2C_BOARD_INFO("bu21013_tp", 0x5C), - .platform_data = &tsc_plat_device, - }, - { - I2C_BOARD_INFO("bu21013_tp", 0x5D), - .platform_data = &tsc_plat_device, - }, -}; - -void __init mop500_stuib_init(void) -{ - if (machine_is_hrefv60()) - tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - else - tsc_plat_device.cs_pin = GPIO_BU21013_CS; - - mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib, - ARRAY_SIZE(mop500_i2c0_devices_stuib)); - - mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib, - ARRAY_SIZE(u8500_i2c3_devices_stuib)); -} diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c deleted file mode 100644 index d397c19570af..000000000000 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Board data for the U8500 UIB, also known as the New UIB - * License terms: GNU General Public License (GPL), version 2 - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/mfd/tc3589x.h> -#include <linux/input/matrix_keypad.h> - -#include "irqs.h" - -#include "board-mop500.h" - -static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = { - { - I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B), - .irq = NOMADIK_GPIO_TO_IRQ(84), - }, -}; - -/* - * TC35893 - */ -static const unsigned int u8500_keymap[] = { - KEY(3, 1, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(6, 4, KEY_VOLUMEDOWN), - KEY(4, 2, KEY_EMAIL), - KEY(3, 3, KEY_RIGHT), - KEY(2, 5, KEY_BACKSPACE), - - KEY(6, 7, KEY_MENU), - KEY(5, 0, KEY_ENTER), - KEY(4, 3, KEY_0), - KEY(3, 4, KEY_DOT), - KEY(5, 2, KEY_UP), - KEY(3, 5, KEY_DOWN), - - KEY(4, 5, KEY_SEND), - KEY(0, 5, KEY_BACK), - KEY(6, 2, KEY_VOLUMEUP), - KEY(1, 3, KEY_SPACE), - KEY(7, 6, KEY_LEFT), - KEY(5, 5, KEY_SEARCH), -}; - -static struct matrix_keymap_data u8500_keymap_data = { - .keymap = u8500_keymap, - .keymap_size = ARRAY_SIZE(u8500_keymap), -}; - -static struct tc3589x_keypad_platform_data tc35893_data = { - .krow = TC_KPD_ROWS, - .kcol = TC_KPD_COLUMNS, - .debounce_period = TC_KPD_DEBOUNCE_PERIOD, - .settle_time = TC_KPD_SETTLE_TIME, - .irqtype = IRQF_TRIGGER_FALLING, - .enable_wakeup = true, - .keymap_data = &u8500_keymap_data, - .no_autorepeat = true, -}; - -static struct tc3589x_platform_data tc3589x_keypad_data = { - .block = TC3589x_BLOCK_KEYPAD, - .keypad = &tc35893_data, - .irq_base = MOP500_EGPIO_IRQ_BASE, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = { - { - I2C_BOARD_INFO("tc3589x", 0x44), - .platform_data = &tc3589x_keypad_data, - .irq = NOMADIK_GPIO_TO_IRQ(218), - .flags = I2C_CLIENT_WAKE, - }, -}; - - -void __init mop500_u8500uib_init(void) -{ - mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500, - ARRAY_SIZE(mop500_i2c3_devices_u8500)); - - mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500, - ARRAY_SIZE(mop500_i2c0_devices_u8500)); - -} diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c deleted file mode 100644 index bdaa422da028..000000000000 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <[email protected]> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2 - */ - -#define pr_fmt(fmt) "mop500-uib: " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/i2c.h> - -#include "board-mop500.h" -#include "id.h" - -enum mop500_uib { - STUIB, - U8500UIB, -}; - -struct uib { - const char *name; - const char *option; - void (*init)(void); -}; - -static struct uib __initdata mop500_uibs[] = { - [STUIB] = { - .name = "ST-UIB", - .option = "stuib", - .init = mop500_stuib_init, - }, - [U8500UIB] = { - .name = "U8500-UIB", - .option = "u8500uib", - .init = mop500_u8500uib_init, - }, -}; - -static struct uib *mop500_uib; - -static int __init mop500_uib_setup(char *str) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) { - struct uib *uib = &mop500_uibs[i]; - - if (!strcmp(str, uib->option)) { - mop500_uib = uib; - break; - } - } - - if (i == ARRAY_SIZE(mop500_uibs)) - pr_err("invalid uib= option (%s)\n", str); - - return 1; -} -__setup("uib=", mop500_uib_setup); - -/* - * The UIBs are detected after the I2C host controllers are registered, so - * i2c_register_board_info() can't be used. - */ -void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, - unsigned n) -{ - struct i2c_adapter *adap; - struct i2c_client *client; - int i; - - adap = i2c_get_adapter(busnum); - if (!adap) { - pr_err("failed to get adapter i2c%d\n", busnum); - return; - } - - for (i = 0; i < n; i++) { - client = i2c_new_device(adap, &info[i]); - if (!client) - pr_err("failed to register %s to i2c%d\n", - info[i].type, busnum); - } - - i2c_put_adapter(adap); -} - -static void __init __mop500_uib_init(struct uib *uib, const char *why) -{ - pr_info("%s (%s)\n", uib->name, why); - uib->init(); -} - -/* - * Detect the UIB attached based on the presence or absence of i2c devices. - */ -int __init mop500_uib_init(void) -{ - struct uib *uib = mop500_uib; - struct i2c_adapter *i2c0; - int ret; - - if (!cpu_is_u8500_family()) - return -ENODEV; - - if (uib) { - __mop500_uib_init(uib, "from uib= boot argument"); - return 0; - } - - i2c0 = i2c_get_adapter(0); - if (!i2c0) { - __mop500_uib_init(&mop500_uibs[STUIB], - "fallback, could not get i2c0"); - return -ENODEV; - } - - /* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */ - ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0, - I2C_SMBUS_QUICK, NULL); - i2c_put_adapter(i2c0); - - if (ret == 0) - uib = &mop500_uibs[U8500UIB]; - else - uib = &mop500_uibs[STUIB]; - - __mop500_uib_init(uib, "detected"); - - return 0; -} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index ad0806eff762..514d40b625a4 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -14,27 +14,16 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/i2c.h> -#include <linux/platform_data/i2c-nomadik.h> #include <linux/platform_data/db8500_thermal.h> -#include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> -#include <linux/amba/serial.h> -#include <linux/spi/spi.h> #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/ab8500.h> #include <linux/regulator/fixed.h> #include <linux/regulator/driver.h> -#include <linux/regulator/gpio-regulator.h> -#include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> -#include <linux/mfd/abx500/ab8500-gpio.h> -#include <linux/mfd/abx500/ab8500-codec.h> #include <linux/platform_data/leds-lp55xx.h> #include <linux/input.h> -#include <linux/smsc911x.h> -#include <linux/gpio_keys.h> #include <linux/delay.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> @@ -46,7 +35,6 @@ #include "setup.h" #include "devices.h" #include "irqs.h" -#include <linux/platform_data/crypto-ux500.h> #include "ste-dma40-db8500.h" #include "db8500-regs.h" @@ -54,401 +42,9 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" -static struct gpio_led snowball_led_array[] = { - { - .name = "user_led", - .default_trigger = "heartbeat", - .gpio = 142, - }, -}; - -static struct gpio_led_platform_data snowball_led_data = { - .leds = snowball_led_array, - .num_leds = ARRAY_SIZE(snowball_led_array), -}; - -static struct platform_device snowball_led_dev = { - .name = "leds-gpio", - .dev = { - .platform_data = &snowball_led_data, - }, -}; - -static struct fixed_voltage_config snowball_gpio_en_3v3_data = { - .supply_name = "EN-3V3", - .gpio = SNOWBALL_EN_3V3_ETH_GPIO, - .microvolts = 3300000, - .enable_high = 1, - .init_data = &gpio_en_3v3_regulator, - .startup_delay = 5000, /* 1200us */ -}; - -static struct platform_device snowball_gpio_en_3v3_regulator_dev = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &snowball_gpio_en_3v3_data, - }, -}; - -/* Dynamically populated. */ -static struct gpio sdi0_reg_gpios[] = { - { 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" }, -}; - -static struct gpio_regulator_state sdi0_reg_states[] = { - { .value = 2900000, .gpios = (0 << 0) }, - { .value = 1800000, .gpios = (1 << 0) }, -}; - -static struct gpio_regulator_config sdi0_reg_info = { - .supply_name = "ext-mmc-level-shifter", - .gpios = sdi0_reg_gpios, - .nr_gpios = ARRAY_SIZE(sdi0_reg_gpios), - .states = sdi0_reg_states, - .nr_states = ARRAY_SIZE(sdi0_reg_states), - .type = REGULATOR_VOLTAGE, - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &sdi0_reg_init_data, - .startup_delay = 100, -}; - -static struct platform_device sdi0_regulator = { - .name = "gpio-regulator", - .id = -1, - .dev = { - .platform_data = &sdi0_reg_info, - }, -}; - -static struct abx500_gpio_platform_data ab8500_gpio_pdata = { - .gpio_base = MOP500_AB8500_PIN_GPIO(1), -}; - -/* ab8500-codec */ -static struct ab8500_codec_platform_data ab8500_codec_pdata = { - .amics = { - .mic1_type = AMIC_TYPE_DIFFERENTIAL, - .mic2_type = AMIC_TYPE_DIFFERENTIAL, - .mic1a_micbias = AMIC_MICBIAS_VAMIC1, - .mic1b_micbias = AMIC_MICBIAS_VAMIC1, - .mic2_micbias = AMIC_MICBIAS_VAMIC2 - }, - .ear_cmv = EAR_CMV_0_95V -}; - -static struct gpio_keys_button snowball_key_array[] = { - { - .gpio = 32, - .type = EV_KEY, - .code = KEY_1, - .desc = "userpb", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 151, - .type = EV_KEY, - .code = KEY_2, - .desc = "extkb1", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 152, - .type = EV_KEY, - .code = KEY_3, - .desc = "extkb2", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 161, - .type = EV_KEY, - .code = KEY_4, - .desc = "extkb3", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 162, - .type = EV_KEY, - .code = KEY_5, - .desc = "extkb4", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data snowball_key_data = { - .buttons = snowball_key_array, - .nbuttons = ARRAY_SIZE(snowball_key_array), -}; - -static struct platform_device snowball_key_dev = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &snowball_key_data, - } -}; - -static struct smsc911x_platform_config snowball_sbnet_cfg = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .shift = 1, -}; - -static struct resource sbnet_res[] = { - { - .name = "smsc911x-memory", - .start = (0x5000 << 16), - .end = (0x5000 << 16) + 0xffff, - .flags = IORESOURCE_MEM, - }, - { - .start = NOMADIK_GPIO_TO_IRQ(140), - .end = NOMADIK_GPIO_TO_IRQ(140), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device snowball_sbnet_dev = { - .name = "smsc911x", - .num_resources = ARRAY_SIZE(sbnet_res), - .resource = sbnet_res, - .dev = { - .platform_data = &snowball_sbnet_cfg, - }, -}; - struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator = &ab8500_regulator_plat_data, - .gpio = &ab8500_gpio_pdata, - .codec = &ab8500_codec_pdata, -}; - -static struct platform_device u8500_cpufreq_cooling_device = { - .name = "db8500-cpufreq-cooling", -}; - -/* - * TPS61052 - */ - -static struct tps6105x_platform_data mop500_tps61052_data = { - .mode = TPS6105X_MODE_VOLTAGE, - .regulator_data = &tps61052_regulator, -}; - -/* - * TC35892 - */ - -static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) -{ - struct device *parent = NULL; -#if 0 - /* FIXME: Is the sdi actually part of tc3589x? */ - parent = tc3589x->dev; -#endif - mop500_sdi_tc35892_init(parent); -} - -static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { - .gpio_base = MOP500_EGPIO(0), - .setup = mop500_tc35892_init, -}; - -static struct tc3589x_platform_data mop500_tc35892_data = { - .block = TC3589x_BLOCK_GPIO, - .gpio = &mop500_tc35892_gpio_data, - .irq_base = MOP500_EGPIO_IRQ_BASE, -}; - -static struct lp55xx_led_config lp5521_pri_led[] = { - [0] = { - .chan_nr = 0, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [1] = { - .chan_nr = 1, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [2] = { - .chan_nr = 2, - .led_current = 0x2f, - .max_current = 0x5f, - }, -}; - -static struct lp55xx_platform_data __initdata lp5521_pri_data = { - .label = "lp5521_pri", - .led_config = &lp5521_pri_led[0], - .num_channels = 3, - .clock_mode = LP55XX_CLOCK_EXT, -}; - -static struct lp55xx_led_config lp5521_sec_led[] = { - [0] = { - .chan_nr = 0, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [1] = { - .chan_nr = 1, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [2] = { - .chan_nr = 2, - .led_current = 0x2f, - .max_current = 0x5f, - }, -}; - -static struct lp55xx_platform_data __initdata lp5521_sec_data = { - .label = "lp5521_sec", - .led_config = &lp5521_sec_led[0], - .num_channels = 3, - .clock_mode = LP55XX_CLOCK_EXT, -}; - -/* I2C0 devices only available on the first HREF/MOP500 */ -static struct i2c_board_info __initdata mop500_i2c0_devices[] = { - { - I2C_BOARD_INFO("tc3589x", 0x42), - .irq = NOMADIK_GPIO_TO_IRQ(217), - .platform_data = &mop500_tc35892_data, - }, - { - I2C_BOARD_INFO("tps61052", 0x33), - .platform_data = &mop500_tps61052_data, - }, -}; - -static struct i2c_board_info __initdata mop500_i2c2_devices[] = { - { - /* lp5521 LED driver, 1st device */ - I2C_BOARD_INFO("lp5521", 0x33), - .platform_data = &lp5521_pri_data, - }, - { - /* lp5521 LED driver, 2st device */ - I2C_BOARD_INFO("lp5521", 0x34), - .platform_data = &lp5521_sec_data, - }, - { - /* Light sensor Rohm BH1780GLI */ - I2C_BOARD_INFO("bh1780", 0x29), - }, -}; - -static int __init mop500_i2c_board_init(void) -{ - if (machine_is_u8500()) - mop500_uib_i2c_add(0, mop500_i2c0_devices, - ARRAY_SIZE(mop500_i2c0_devices)); - mop500_uib_i2c_add(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - return 0; -} -device_initcall(mop500_i2c_board_init); - -static void __init mop500_i2c_init(struct device *parent) -{ - db8500_add_i2c0(parent, NULL); - db8500_add_i2c1(parent, NULL); - db8500_add_i2c2(parent, NULL); - db8500_add_i2c3(parent, NULL); -} - -static struct gpio_keys_button mop500_gpio_keys[] = { - { - .desc = "SFH7741 Proximity Sensor", - .type = EV_SW, - .code = SW_FRONT_PROXIMITY, - .active_low = 0, - .can_disable = 1, - } -}; - -static struct regulator *prox_regulator; -static int mop500_prox_activate(struct device *dev); -static void mop500_prox_deactivate(struct device *dev); - -static struct gpio_keys_platform_data mop500_gpio_keys_data = { - .buttons = mop500_gpio_keys, - .nbuttons = ARRAY_SIZE(mop500_gpio_keys), - .enable = mop500_prox_activate, - .disable = mop500_prox_deactivate, -}; - -static struct platform_device mop500_gpio_keys_device = { - .name = "gpio-keys", - .id = 0, - .dev = { - .platform_data = &mop500_gpio_keys_data, - }, -}; - -static int mop500_prox_activate(struct device *dev) -{ - prox_regulator = regulator_get(&mop500_gpio_keys_device.dev, - "vcc"); - if (IS_ERR(prox_regulator)) { - dev_err(&mop500_gpio_keys_device.dev, - "no regulator\n"); - return PTR_ERR(prox_regulator); - } - - return regulator_enable(prox_regulator); -} - -static void mop500_prox_deactivate(struct device *dev) -{ - regulator_disable(prox_regulator); - regulator_put(prox_regulator); -} - -static struct cryp_platform_data u8500_cryp1_platform_data = { - .mem_to_engine = { - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV48_CAC1, - .mode = STEDMA40_MODE_LOGICAL, - }, - .engine_to_mem = { - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV48_CAC1, - .mode = STEDMA40_MODE_LOGICAL, - } -}; - -static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV50_HAC1_TX, - .mode = STEDMA40_MODE_LOGICAL, -}; - -static struct hash_platform_data u8500_hash1_platform_data = { - .mem_to_engine = &u8500_hash_dma_cfg_tx, - .dma_filter = stedma40_filter, -}; - -/* add any platform devices here - TODO */ -static struct platform_device *mop500_platform_devs[] __initdata = { - &mop500_gpio_keys_device, - &sdi0_regulator, }; #ifdef CONFIG_STE_DMA40 @@ -480,236 +76,3 @@ struct pl022_ssp_controller ssp0_plat = { */ .num_chipselect = 5, }; - -static void __init mop500_spi_init(struct device *parent) -{ - db8500_add_ssp0(parent, &ssp0_plat); -} - -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg uart0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV13_UART0, -}; - -static struct stedma40_chan_cfg uart0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV13_UART0, -}; - -static struct stedma40_chan_cfg uart1_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV12_UART1, -}; - -static struct stedma40_chan_cfg uart1_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV12_UART1, -}; - -static struct stedma40_chan_cfg uart2_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV11_UART2, -}; - -static struct stedma40_chan_cfg uart2_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV11_UART2, -}; -#endif - -struct amba_pl011_data uart0_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart0_dma_cfg_rx, - .dma_tx_param = &uart0_dma_cfg_tx, -#endif -}; - -struct amba_pl011_data uart1_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart1_dma_cfg_rx, - .dma_tx_param = &uart1_dma_cfg_tx, -#endif -}; - -struct amba_pl011_data uart2_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart2_dma_cfg_rx, - .dma_tx_param = &uart2_dma_cfg_tx, -#endif -}; - -static void __init mop500_uart_init(struct device *parent) -{ - db8500_add_uart0(parent, &uart0_plat); - db8500_add_uart1(parent, &uart1_plat); - db8500_add_uart2(parent, &uart2_plat); -} - -static void __init u8500_cryp1_hash1_init(struct device *parent) -{ - db8500_add_cryp1(parent, &u8500_cryp1_platform_data); - db8500_add_hash1(parent, &u8500_hash1_platform_data); -} - -static struct platform_device *snowball_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, - &snowball_sbnet_dev, - &snowball_gpio_en_3v3_regulator_dev, - &u8500_cpufreq_cooling_device, - &sdi0_regulator, -}; - -static void __init mop500_init_machine(void) -{ - struct device *parent = NULL; - int i; - - platform_device_register(&db8500_prcmu_device); - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - - sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN; - sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; - - mop500_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_i2c_init(parent); - mop500_sdi_init(parent); - mop500_spi_init(parent); - mop500_audio_init(parent); - mop500_uart_init(parent); - u8500_cryp1_hash1_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - - -static void __init snowball_init_machine(void) -{ - struct device *parent = NULL; - int i; - - platform_device_register(&db8500_prcmu_device); - - sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO; - sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; - - snowball_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) - snowball_platform_devs[i]->dev.parent = parent; - - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); - - mop500_i2c_init(parent); - snowball_sdi_init(parent); - mop500_spi_init(parent); - mop500_audio_init(parent); - mop500_uart_init(parent); - - u8500_cryp1_hash1_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -static void __init hrefv60_init_machine(void) -{ - struct device *parent = NULL; - int i; - - platform_device_register(&db8500_prcmu_device); - /* - * The HREFv60 board removed a GPIO expander and routed - * all these GPIO pins to the internal GPIO controller - * instead. - */ - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - - sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO; - sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; - - hrefv60_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_i2c_init(parent); - hrefv60_sdi_init(parent); - mop500_spi_init(parent); - mop500_audio_init(parent); - mop500_uart_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -MACHINE_START(U8500, "ST-Ericsson MOP500 platform") - /* Maintainer: Srinidhi Kasagar <[email protected]> */ - .atag_offset = 0x100, - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .init_time = ux500_timer_init, - .init_machine = mop500_init_machine, - .init_late = ux500_init_late, - .restart = ux500_restart, -MACHINE_END - -MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520") - .atag_offset = 0x100, - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - .init_time = ux500_timer_init, - .init_machine = mop500_init_machine, - .init_late = ux500_init_late, - .restart = ux500_restart, -MACHINE_END - -MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") - .atag_offset = 0x100, - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - .init_time = ux500_timer_init, - .init_machine = hrefv60_init_machine, - .init_late = ux500_init_late, - .restart = ux500_restart, -MACHINE_END - -MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") - .atag_offset = 0x100, - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .init_time = ux500_timer_init, - .init_machine = snowball_init_machine, - .init_late = NULL, - .restart = ux500_restart, -MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index d6fab166cbf1..511d6febbe99 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -79,7 +79,6 @@ #define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */ struct device; -struct i2c_board_info; extern struct mmci_platform_data mop500_sdi0_data; extern struct mmci_platform_data mop500_sdi1_data; extern struct mmci_platform_data mop500_sdi2_data; @@ -88,25 +87,10 @@ extern struct msp_i2s_platform_data msp0_platform_data; extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; extern struct msp_i2s_platform_data msp3_platform_data; -extern struct arm_pmu_platdata db8500_pmu_platdata; -extern struct amba_pl011_data uart0_plat; -extern struct amba_pl011_data uart1_plat; -extern struct amba_pl011_data uart2_plat; extern struct pl022_ssp_controller ssp0_plat; -extern struct stedma40_platform_data dma40_plat_data; -extern void mop500_sdi_init(struct device *parent); -extern void snowball_sdi_init(struct device *parent); -extern void hrefv60_sdi_init(struct device *parent); -extern void mop500_sdi_tc35892_init(struct device *parent); -void __init mop500_u8500uib_init(void); -void __init mop500_stuib_init(void); void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); -void mop500_audio_init(struct device *parent); -int __init mop500_uib_init(void); -void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, - unsigned n); #endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 301c3460d96a..2e85c1e72535 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -32,7 +32,6 @@ #include "irqs.h" #include "devices-db8500.h" -#include "ste-dma40-db8500.h" #include "db8500-regs.h" #include "board-mop500.h" #include "id.h" @@ -93,14 +92,6 @@ void __init u8500_map_io(void) iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); } -static struct resource db8500_pmu_resources[] = { - [0] = { - .start = IRQ_DB8500_PMU, - .end = IRQ_DB8500_PMU, - .flags = IORESOURCE_IRQ, - }, -}; - /* * The PMU IRQ lines of two cores are wired together into a single interrupt. * Bounce the interrupt to the other core if it's not ours. @@ -125,54 +116,6 @@ struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; -static struct platform_device db8500_pmu_device = { - .name = "arm-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(db8500_pmu_resources), - .resource = db8500_pmu_resources, - .dev.platform_data = &db8500_pmu_platdata, -}; - -static struct platform_device *platform_devs[] __initdata = { - &u8500_dma40_device, - &db8500_pmu_device, -}; - -static resource_size_t __initdata db8500_gpio_base[] = { - U8500_GPIOBANK0_BASE, - U8500_GPIOBANK1_BASE, - U8500_GPIOBANK2_BASE, - U8500_GPIOBANK3_BASE, - U8500_GPIOBANK4_BASE, - U8500_GPIOBANK5_BASE, - U8500_GPIOBANK6_BASE, - U8500_GPIOBANK7_BASE, - U8500_GPIOBANK8_BASE, -}; - -static void __init db8500_add_gpios(struct device *parent) -{ - struct nmk_gpio_platform_data pdata = { - .supports_sleepmode = true, - }; - - dbx500_add_gpios(parent, db8500_gpio_base, - ARRAY_SIZE(db8500_gpio_base), - IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); -} - -static int usb_db8500_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9, - DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10, - DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11, - DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12, - DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13, - DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14, - DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15, - DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 -}; - static const char *db8500_read_soc_id(void) { void __iomem *uid = __io_address(U8500_BB_UID_BASE); @@ -192,60 +135,22 @@ static struct device * __init db8500_soc_device_init(void) return ux500_soc_device_init(soc_id); } -/* - * This function is called from the board init - */ -struct device * __init u8500_init_devices(void) -{ - struct device *parent; - int i; - - parent = db8500_soc_device_init(); - - db8500_add_rtc(parent); - db8500_add_gpios(parent); - db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg); - - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) - platform_devs[i]->dev.parent = parent; - - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - - return parent; -} - #ifdef CONFIG_MACH_UX500_DT static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), - OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), - /* Requires clock name bindings. */ - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), - OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), + /* Requires non-DT:able platform data. */ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", @@ -253,17 +158,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), - /* Requires clock name and DMA bindings. */ - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, - "ux500-msp-i2s.0", &msp0_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, - "ux500-msp-i2s.1", &msp1_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, - "ux500-msp-i2s.2", &msp2_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, - "ux500-msp-i2s.3", &msp3_platform_data), - /* Requires clock name bindings and channel address lookup table. */ - OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL), {}, }; diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 5d7eebcabc63..f84d4397896b 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -78,9 +78,17 @@ void __init ux500_init_irq(void) if (cpu_is_u8500_family()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); - u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); + + if (of_have_populated_dt()) + u8500_of_clk_init(U8500_CLKRST1_BASE, + U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, + U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + else + u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); } else if (cpu_is_u9540()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); @@ -96,11 +104,6 @@ void __init ux500_init_irq(void) } } -void __init ux500_init_late(void) -{ - mop500_uib_init(); -} - static const char * __init ux500_get_machine(void) { return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c deleted file mode 100644 index f71b3d7bd4fb..000000000000 --- a/arch/arm/mach-ux500/devices-common.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <[email protected]> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/err.h> -#include <linux/irq.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/platform_data/pinctrl-nomadik.h> - -#include "irqs.h" - -#include "devices-common.h" - -static struct platform_device * -dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq, - struct nmk_gpio_platform_data *pdata) -{ - struct resource resources[] = { - { - .start = addr, - .end = addr + 127, - .flags = IORESOURCE_MEM, - }, - { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return platform_device_register_resndata( - parent, - "gpio", - id, - resources, - ARRAY_SIZE(resources), - pdata, - sizeof(*pdata)); -} - -void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, - int irq, struct nmk_gpio_platform_data *pdata) -{ - int first = 0; - int i; - - for (i = 0; i < num; i++, first += 32, irq++) { - pdata->first_gpio = first; - pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); - pdata->num_gpio = 32; - - dbx500_add_gpio(parent, i, base[i], irq, pdata); - } -} diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h deleted file mode 100644 index 96fa4ac89e2e..000000000000 --- a/arch/arm/mach-ux500/devices-common.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <[email protected]> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_COMMON_H -#define __DEVICES_COMMON_H - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/sys_soc.h> -#include <linux/amba/bus.h> -#include <linux/platform_data/i2c-nomadik.h> -#include <linux/platform_data/crypto-ux500.h> - -struct spi_master_cntlr; - -static inline struct amba_device * -dbx500_add_msp_spi(struct device *parent, const char *name, - resource_size_t base, int irq, - struct spi_master_cntlr *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, 0); -} - -static inline struct amba_device * -dbx500_add_spi(struct device *parent, const char *name, resource_size_t base, - int irq, struct spi_master_cntlr *pdata, - u32 periphid) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, periphid); -} - -struct mmci_platform_data; - -static inline struct amba_device * -dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base, - int irq, struct mmci_platform_data *pdata, u32 periphid) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, periphid); -} - -struct amba_pl011_data; - -static inline struct amba_device * -dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, - int irq, struct amba_pl011_data *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); -} - -struct nmk_i2c_controller; - -static inline struct amba_device * -dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, - struct nmk_i2c_controller *data) -{ - /* Conjure a name similar to what the platform device used to have */ - char name[16]; - - snprintf(name, sizeof(name), "nmk-i2c.%d", id); - return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0); -} - -static inline struct amba_device * -dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) -{ - return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq, - 0, NULL, 0); -} - -struct cryp_platform_data; - -static inline struct platform_device * -dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq, - struct cryp_platform_data *pdata) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "cryp1", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = pdata, - .size_data = sizeof(*pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); -} - -struct hash_platform_data; - -static inline struct platform_device * -dbx500_add_hash1(struct device *parent, int id, resource_size_t base, - struct hash_platform_data *pdata) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - }; - - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "hash1", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = pdata, - .size_data = sizeof(*pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); -} - -struct nmk_gpio_platform_data; - -void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, - int irq, struct nmk_gpio_platform_data *pdata); - -static inline void -dbx500_add_pinctrl(struct device *parent, const char *name, - resource_size_t base) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_8K), - }; - struct platform_device_info pdevinfo = { - .parent = parent, - .name = name, - .id = -1, - .res = res, - .num_res = ARRAY_SIZE(res), - }; - - platform_device_register_full(&pdevinfo); -} - -#endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index bc316062e0c2..c59f89d058ff 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -9,10 +9,8 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> -#include <linux/platform_data/dma-ste-dma40.h> #include <linux/mfd/dbx500-prcmu.h> #include "setup.h" @@ -20,62 +18,6 @@ #include "db8500-regs.h" #include "devices-db8500.h" -#include "ste-dma40-db8500.h" - -static struct resource dma40_resources[] = { - [0] = { - .start = U8500_DMA_BASE, - .end = U8500_DMA_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "base", - }, - [1] = { - .start = U8500_DMA_LCPA_BASE, - .end = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - .name = "lcpa", - }, - [2] = { - .start = IRQ_DB8500_DMA, - .end = IRQ_DB8500_DMA, - .flags = IORESOURCE_IRQ, - } -}; - -struct stedma40_platform_data dma40_plat_data = { - .disabled_channels = {-1}, -}; - -struct platform_device u8500_dma40_device = { - .dev = { - .platform_data = &dma40_plat_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .name = "dma40", - .id = 0, - .num_resources = ARRAY_SIZE(dma40_resources), - .resource = dma40_resources -}; - -struct resource keypad_resources[] = { - [0] = { - .start = U8500_SKE_BASE, - .end = U8500_SKE_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DB8500_KB, - .end = IRQ_DB8500_KB, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device u8500_ske_keypad_device = { - .name = "nmk-ske-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(keypad_resources), - .resource = keypad_resources, -}; struct prcmu_pdata db8500_prcmu_pdata = { .ab_platdata = &ab8500_platdata, @@ -84,39 +26,3 @@ struct prcmu_pdata db8500_prcmu_pdata = { .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, }; - -static struct resource db8500_prcmu_res[] = { - { - .name = "prcmu", - .start = U8500_PRCMU_BASE, - .end = U8500_PRCMU_BASE + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "prcmu-tcdm", - .start = U8500_PRCMU_TCDM_BASE, - .end = U8500_PRCMU_TCDM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "irq", - .start = IRQ_DB8500_PRCMU1, - .end = IRQ_DB8500_PRCMU1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "prcmu-tcpm", - .start = U8500_PRCMU_TCPM_BASE, - .end = U8500_PRCMU_TCPM_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device db8500_prcmu_device = { - .name = "db8500-prcmu", - .resource = db8500_prcmu_res, - .num_resources = ARRAY_SIZE(db8500_prcmu_res), - .dev = { - .platform_data = &db8500_prcmu_pdata, - }, -}; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 321998320f98..b8ffc9979bb2 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -8,122 +8,12 @@ #ifndef __DEVICES_DB8500_H #define __DEVICES_DB8500_H -#include <linux/platform_data/usb-musb-ux500.h> #include "irqs.h" #include "db8500-regs.h" -#include "devices-common.h" -struct ske_keypad_platform_data; -struct pl022_ssp_controller; struct platform_device; extern struct ab8500_platform_data ab8500_platdata; extern struct prcmu_pdata db8500_prcmu_pdata; -extern struct platform_device db8500_prcmu_device; -static inline struct platform_device * -db8500_add_ske_keypad(struct device *parent, - struct ske_keypad_platform_data *pdata, - size_t size) -{ - struct resource resources[] = { - DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K), - DEFINE_RES_IRQ(IRQ_DB8500_KB), - }; - - return platform_device_register_resndata(parent, "nmk-ske-keypad", -1, - resources, 2, pdata, size); -} - -static inline struct amba_device * -db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, - int irq, struct pl022_ssp_controller *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); -} - -#define db8500_add_i2c0(parent, pdata) \ - dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) -#define db8500_add_i2c1(parent, pdata) \ - dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) -#define db8500_add_i2c2(parent, pdata) \ - dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) -#define db8500_add_i2c3(parent, pdata) \ - dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) -#define db8500_add_i2c4(parent, pdata) \ - dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) - -#define db8500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ - IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \ - IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \ - IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \ - IRQ_DB8500_MSP1, pdata) - -#define db8500_add_rtc(parent) \ - dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC); - -#define db8500_add_usb(parent, rx_cfg, tx_cfg) \ - ux500_add_usb(parent, U8500_USBOTG_BASE, \ - IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) - -#define db8500_add_sdi0(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \ - IRQ_DB8500_SDMMC0, pdata, pid) -#define db8500_add_sdi1(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \ - IRQ_DB8500_SDMMC1, pdata, pid) -#define db8500_add_sdi2(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \ - IRQ_DB8500_SDMMC2, pdata, pid) -#define db8500_add_sdi3(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \ - IRQ_DB8500_SDMMC3, pdata, pid) -#define db8500_add_sdi4(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \ - IRQ_DB8500_SDMMC4, pdata, pid) -#define db8500_add_sdi5(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \ - IRQ_DB8500_SDMMC5, pdata, pid) - -#define db8500_add_ssp0(parent, pdata) \ - db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \ - IRQ_DB8500_SSP0, pdata) -#define db8500_add_ssp1(parent, pdata) \ - db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \ - IRQ_DB8500_SSP1, pdata) - -#define db8500_add_spi0(parent, pdata) \ - dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \ - IRQ_DB8500_SPI0, pdata, 0) -#define db8500_add_spi1(parent, pdata) \ - dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \ - IRQ_DB8500_SPI1, pdata, 0) -#define db8500_add_spi2(parent, pdata) \ - dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \ - IRQ_DB8500_SPI2, pdata, 0) -#define db8500_add_spi3(parent, pdata) \ - dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \ - IRQ_DB8500_SPI3, pdata, 0) - -#define db8500_add_uart0(parent, pdata) \ - dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \ - IRQ_DB8500_UART0, pdata) -#define db8500_add_uart1(parent, pdata) \ - dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \ - IRQ_DB8500_UART1, pdata) -#define db8500_add_uart2(parent, pdata) \ - dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \ - IRQ_DB8500_UART2, pdata) - -#define db8500_add_cryp1(parent, pdata) \ - dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata) -#define db8500_add_hash1(parent, pdata) \ - dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata) #endif diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h index cbc6f1e4104d..5bca7c605cd6 100644 --- a/arch/arm/mach-ux500/devices.h +++ b/arch/arm/mach-ux500/devices.h @@ -10,14 +10,6 @@ struct platform_device; struct amba_device; -extern struct platform_device u8500_gpio_devs[]; - extern struct amba_device ux500_pl031_device; -extern struct platform_device ux500_hash1_device; -extern struct platform_device ux500_cryp1_device; - -extern struct platform_device u8500_dma40_device; -extern struct platform_device ux500_ske_keypad_device; - #endif diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index 656324aad18e..bdb356498a74 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -24,7 +24,6 @@ extern void __init u8500_map_io(void); extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init ux500_init_late(void); extern struct device *ux500_soc_device_init(const char *soc_id); diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index b6bd0efcbe64..05a4ff78b3bd 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -97,8 +97,8 @@ dt_fail: * sched_clock with higher rating then MTU since is always-on. * */ - - nmdk_timer_init(mtu_timer_base, IRQ_MTU0); + if (!of_have_populated_dt()) + nmdk_timer_init(mtu_timer_base, IRQ_MTU0); clksrc_dbx500_prcmu_init(prcmu_timer_base); ux500_twd_init(); } diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c deleted file mode 100644 index b7bd8d3a5507..000000000000 --- a/arch/arm/mach-ux500/usb.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Mian Yousaf Kaukab <[email protected]> - * License terms: GNU General Public License (GPL) version 2 - */ -#include <linux/platform_device.h> -#include <linux/usb/musb.h> -#include <linux/dma-mapping.h> -#include <linux/platform_data/usb-musb-ux500.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include "db8500-regs.h" - -#define MUSB_DMA40_RX_CH { \ - .mode = STEDMA40_MODE_LOGICAL, \ - .dir = DMA_DEV_TO_MEM, \ - } - -#define MUSB_DMA40_TX_CH { \ - .mode = STEDMA40_MODE_LOGICAL, \ - .dir = DMA_MEM_TO_DEV, \ - } - -static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] - = { - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH -}; - -static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] - = { - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, -}; - -static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { - &musb_dma_rx_ch[0], - &musb_dma_rx_ch[1], - &musb_dma_rx_ch[2], - &musb_dma_rx_ch[3], - &musb_dma_rx_ch[4], - &musb_dma_rx_ch[5], - &musb_dma_rx_ch[6], - &musb_dma_rx_ch[7] -}; - -static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { - &musb_dma_tx_ch[0], - &musb_dma_tx_ch[1], - &musb_dma_tx_ch[2], - &musb_dma_tx_ch[3], - &musb_dma_tx_ch[4], - &musb_dma_tx_ch[5], - &musb_dma_tx_ch[6], - &musb_dma_tx_ch[7] -}; - -static struct ux500_musb_board_data musb_board_data = { - .dma_rx_param_array = ux500_dma_rx_param_array, - .dma_tx_param_array = ux500_dma_tx_param_array, - .dma_filter = stedma40_filter, -}; - -static struct musb_hdrc_platform_data musb_platform_data = { - .mode = MUSB_OTG, - .board_data = &musb_board_data, -}; - -static struct resource usb_resources[] = { - [0] = { - .name = "usb-mem", - .flags = IORESOURCE_MEM, - }, - - [1] = { - .name = "mc", /* hard-coded in musb */ - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device ux500_musb_device = { - .name = "musb-ux500", - .id = 0, - .dev = { - .platform_data = &musb_platform_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(usb_resources), - .resource = usb_resources, -}; - -static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type) -{ - u32 idx; - - for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) - musb_dma_rx_ch[idx].dev_type = dev_type[idx]; -} - -static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type) -{ - u32 idx; - - for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) - musb_dma_tx_ch[idx].dev_type = dev_type[idx]; -} - -void ux500_add_usb(struct device *parent, resource_size_t base, int irq, - int *dma_rx_cfg, int *dma_tx_cfg) -{ - ux500_musb_device.resource[0].start = base; - ux500_musb_device.resource[0].end = base + SZ_64K - 1; - ux500_musb_device.resource[1].start = irq; - ux500_musb_device.resource[1].end = irq; - - ux500_usb_dma_update_rx_ch_config(dma_rx_cfg); - ux500_usb_dma_update_tx_ch_config(dma_tx_cfg); - - ux500_musb_device.dev.parent = parent; - - platform_device_register(&ux500_musb_device); -} diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 4fb1f03a10d1..335beb341355 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -87,8 +87,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #endif #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) +# define soc_is_s3c6400() is_samsung_s3c6400() +# define soc_is_s3c6410() is_samsung_s3c6410() # define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410()) #else +# define soc_is_s3c6400() 0 +# define soc_is_s3c6410() 0 # define soc_is_s3c64xx() 0 #endif diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 50a3ea0037db..aa9511b6914a 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -11,12 +11,18 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used on S3C64xx when booting with + * Device Tree support. + */ + #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <mach/hardware.h> @@ -148,8 +154,12 @@ static int __init s3c_arch_init(void) // do the correct init for cpu - if (cpu == NULL) + if (cpu == NULL) { + /* Not needed when booting with device tree. */ + if (of_have_populated_dt()) + return 0; panic("s3c_arch_init: NULL cpu\n"); + } ret = (cpu->init)(); if (ret != 0) diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 3413380086d5..8eb4799237f0 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -8,6 +8,4 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o -ifdef CONFIG_COMMON_CLK obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o -endif diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile index c6a806ed0e8c..521483f0ba33 100644 --- a/drivers/clk/ux500/Makefile +++ b/drivers/clk/ux500/Makefile @@ -8,6 +8,7 @@ obj-y += clk-prcmu.o obj-y += clk-sysctrl.o # Clock definitions +obj-y += u8500_of_clk.o obj-y += u8500_clk.o obj-y += u9540_clk.o obj-y += u8540_clk.o diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c new file mode 100644 index 000000000000..cdeff299de26 --- /dev/null +++ b/drivers/clk/ux500/u8500_of_clk.c @@ -0,0 +1,559 @@ +/* + * Clock definitions for u8500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <[email protected]> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/clk-ux500.h> +#include "clk.h" + +#define PRCC_NUM_PERIPH_CLUSTERS 6 +#define PRCC_PERIPHS_PER_CLUSTER 32 + +static struct clk *prcmu_clk[PRCMU_NUM_CLKS]; +static struct clk *prcc_pclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER]; +static struct clk *prcc_kclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER]; + +#define PRCC_SHOW(clk, base, bit) \ + clk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] +#define PRCC_PCLK_STORE(clk, base, bit) \ + prcc_pclk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] = clk +#define PRCC_KCLK_STORE(clk, base, bit) \ + prcc_kclk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] = clk + +struct clk *ux500_twocell_get(struct of_phandle_args *clkspec, void *data) +{ + struct clk **clk_data = data; + unsigned int base, bit; + + if (clkspec->args_count != 2) + return ERR_PTR(-EINVAL); + + base = clkspec->args[0]; + bit = clkspec->args[1]; + + if (base != 1 && base != 2 && base != 3 && base != 5 && base != 6) { + pr_err("%s: invalid PRCC base %d\n", __func__, base); + return ERR_PTR(-EINVAL); + } + + return PRCC_SHOW(clk_data, base, bit); +} + +static const struct of_device_id u8500_clk_of_match[] = { + { .compatible = "stericsson,u8500-clks", }, + { }, +}; + +void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base) +{ + struct prcmu_fw_version *fw_version; + struct device_node *np = NULL; + struct device_node *child = NULL; + const char *sgaclk_parent = NULL; + struct clk *clk, *rtc_clk, *twd_clk; + + if (of_have_populated_dt()) + np = of_find_matching_node(NULL, u8500_clk_of_match); + if (!np) { + pr_err("Either DT or U8500 Clock node not found\n"); + return; + } + + /* Clock sources */ + clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + prcmu_clk[PRCMU_PLLSOC0] = clk; + + clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + prcmu_clk[PRCMU_PLLSOC1] = clk; + + clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + prcmu_clk[PRCMU_PLLDDR] = clk; + + /* FIXME: Add sys, ulp and int clocks here. */ + + rtc_clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL", + CLK_IS_ROOT|CLK_IGNORE_UNUSED, + 32768); + + /* PRCMU clocks */ + fw_version = prcmu_get_fw_version(); + if (fw_version != NULL) { + switch (fw_version->project) { + case PRCMU_FW_PROJECT_U8500_C2: + case PRCMU_FW_PROJECT_U8520: + case PRCMU_FW_PROJECT_U8420: + sgaclk_parent = "soc0_pll"; + break; + default: + break; + } + } + + if (sgaclk_parent) + clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent, + PRCMU_SGACLK, 0); + else + clk = clk_reg_prcmu_gate("sgclk", NULL, + PRCMU_SGACLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_SGACLK] = clk; + + clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_UARTCLK] = clk; + + clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_MSP02CLK] = clk; + + clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_MSP1CLK] = clk; + + clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_I2CCLK] = clk; + + clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_SLIMCLK] = clk; + + clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_PER1CLK] = clk; + + clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_PER2CLK] = clk; + + clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_PER3CLK] = clk; + + clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_PER5CLK] = clk; + + clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_PER6CLK] = clk; + + clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_PER7CLK] = clk; + + clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_LCDCLK] = clk; + + clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_BMLCLK] = clk; + + clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_HSITXCLK] = clk; + + clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_HSIRXCLK] = clk; + + clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_HDMICLK] = clk; + + clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_APEATCLK] = clk; + + clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK, + CLK_IS_ROOT); + prcmu_clk[PRCMU_APETRACECLK] = clk; + + clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_MCDECLK] = clk; + + clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK, + CLK_IS_ROOT); + prcmu_clk[PRCMU_IPI2CCLK] = clk; + + clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK, + CLK_IS_ROOT); + prcmu_clk[PRCMU_DSIALTCLK] = clk; + + clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_DMACLK] = clk; + + clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_B2R2CLK] = clk; + + clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_TVCLK] = clk; + + clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_SSPCLK] = clk; + + clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_RNGCLK] = clk; + + clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_UICCCLK] = clk; + + clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT); + prcmu_clk[PRCMU_TIMCLK] = clk; + + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK, + 100000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_SDMMCCLK] = clk; + + clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", + PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_PLLDSI] = clk; + + clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll", + PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_DSI0CLK] = clk; + + clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll", + PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_DSI1CLK] = clk; + + clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk", + PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_DSI0ESCCLK] = clk; + + clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk", + PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_DSI1ESCCLK] = clk; + + clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk", + PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE); + prcmu_clk[PRCMU_DSI2ESCCLK] = clk; + + clk = clk_reg_prcmu_scalable_rate("armss", NULL, + PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED); + prcmu_clk[PRCMU_ARMSS] = clk; + + twd_clk = clk_register_fixed_factor(NULL, "smp_twd", "armss", + CLK_IGNORE_UNUSED, 1, 2); + + /* + * FIXME: Add special handled PRCMU clocks here: + * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. + * 2. ab9540_clkout1yuv, see clkout0yuv + */ + + /* PRCC P-clocks */ + clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base, + BIT(0), 0); + PRCC_PCLK_STORE(clk, 1, 0); + + clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base, + BIT(1), 0); + PRCC_PCLK_STORE(clk, 1, 1); + + clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base, + BIT(2), 0); + PRCC_PCLK_STORE(clk, 1, 2); + + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base, + BIT(3), 0); + PRCC_PCLK_STORE(clk, 1, 3); + + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base, + BIT(4), 0); + PRCC_PCLK_STORE(clk, 1, 4); + + clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base, + BIT(5), 0); + PRCC_PCLK_STORE(clk, 1, 5); + + clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base, + BIT(6), 0); + PRCC_PCLK_STORE(clk, 1, 6); + + clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base, + BIT(7), 0); + PRCC_PCLK_STORE(clk, 1, 7); + + clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base, + BIT(8), 0); + PRCC_PCLK_STORE(clk, 1, 8); + + clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base, + BIT(9), 0); + PRCC_PCLK_STORE(clk, 1, 9); + + clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base, + BIT(10), 0); + PRCC_PCLK_STORE(clk, 1, 10); + + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base, + BIT(11), 0); + PRCC_PCLK_STORE(clk, 1, 11); + + clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base, + BIT(0), 0); + PRCC_PCLK_STORE(clk, 2, 0); + + clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base, + BIT(1), 0); + PRCC_PCLK_STORE(clk, 2, 1); + + clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base, + BIT(2), 0); + PRCC_PCLK_STORE(clk, 2, 2); + + clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base, + BIT(3), 0); + PRCC_PCLK_STORE(clk, 2, 3); + + clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base, + BIT(4), 0); + PRCC_PCLK_STORE(clk, 2, 4); + + clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base, + BIT(5), 0); + PRCC_PCLK_STORE(clk, 2, 5); + + clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base, + BIT(6), 0); + PRCC_PCLK_STORE(clk, 2, 6); + + clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base, + BIT(7), 0); + PRCC_PCLK_STORE(clk, 2, 7); + + clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base, + BIT(8), 0); + PRCC_PCLK_STORE(clk, 2, 8); + + clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base, + BIT(9), 0); + PRCC_PCLK_STORE(clk, 2, 9); + + clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base, + BIT(10), 0); + PRCC_PCLK_STORE(clk, 2, 10); + + clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base, + BIT(11), 0); + PRCC_PCLK_STORE(clk, 2, 11); + + clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base, + BIT(12), 0); + PRCC_PCLK_STORE(clk, 2, 12); + + clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base, + BIT(0), 0); + PRCC_PCLK_STORE(clk, 3, 0); + + clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base, + BIT(1), 0); + PRCC_PCLK_STORE(clk, 3, 1); + + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base, + BIT(2), 0); + PRCC_PCLK_STORE(clk, 3, 2); + + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base, + BIT(3), 0); + PRCC_PCLK_STORE(clk, 3, 3); + + clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base, + BIT(4), 0); + PRCC_PCLK_STORE(clk, 3, 4); + + clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base, + BIT(5), 0); + PRCC_PCLK_STORE(clk, 3, 5); + + clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base, + BIT(6), 0); + PRCC_PCLK_STORE(clk, 3, 6); + + clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base, + BIT(7), 0); + PRCC_PCLK_STORE(clk, 3, 7); + + clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base, + BIT(8), 0); + PRCC_PCLK_STORE(clk, 3, 8); + + clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base, + BIT(0), 0); + PRCC_PCLK_STORE(clk, 5, 0); + + clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base, + BIT(1), 0); + PRCC_PCLK_STORE(clk, 5, 1); + + clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base, + BIT(0), 0); + PRCC_PCLK_STORE(clk, 6, 0); + + clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base, + BIT(1), 0); + PRCC_PCLK_STORE(clk, 6, 1); + + clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base, + BIT(2), 0); + PRCC_PCLK_STORE(clk, 6, 2); + + clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base, + BIT(3), 0); + PRCC_PCLK_STORE(clk, 6, 3); + + clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base, + BIT(4), 0); + PRCC_PCLK_STORE(clk, 6, 4); + + clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base, + BIT(5), 0); + PRCC_PCLK_STORE(clk, 6, 5); + + clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base, + BIT(6), 0); + PRCC_PCLK_STORE(clk, 6, 6); + + clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base, + BIT(7), 0); + PRCC_PCLK_STORE(clk, 6, 7); + + /* PRCC K-clocks + * + * FIXME: Some drivers requires PERPIH[n| to be automatically enabled + * by enabling just the K-clock, even if it is not a valid parent to + * the K-clock. Until drivers get fixed we might need some kind of + * "parent muxed join". + */ + + /* Periph1 */ + clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk", + clkrst1_base, BIT(0), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 0); + + clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk", + clkrst1_base, BIT(1), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 1); + + clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", + clkrst1_base, BIT(2), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 2); + + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", + clkrst1_base, BIT(3), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 3); + + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", + clkrst1_base, BIT(4), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 4); + + clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", + clkrst1_base, BIT(5), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 5); + + clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", + clkrst1_base, BIT(6), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 6); + + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", + clkrst1_base, BIT(8), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 8); + + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", + clkrst1_base, BIT(9), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 9); + + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", + clkrst1_base, BIT(10), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 1, 10); + + /* Periph2 */ + clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", + clkrst2_base, BIT(0), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 2, 0); + + clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", + clkrst2_base, BIT(2), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 2, 2); + + clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", + clkrst2_base, BIT(3), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 2, 3); + + clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", + clkrst2_base, BIT(4), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 2, 4); + + clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk", + clkrst2_base, BIT(5), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 2, 5); + + /* Note that rate is received from parent. */ + clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk", + clkrst2_base, BIT(6), + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); + PRCC_KCLK_STORE(clk, 2, 6); + + clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk", + clkrst2_base, BIT(7), + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); + PRCC_KCLK_STORE(clk, 2, 7); + + /* Periph3 */ + clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", + clkrst3_base, BIT(1), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 3, 1); + + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", + clkrst3_base, BIT(2), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 3, 2); + + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", + clkrst3_base, BIT(3), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 3, 3); + + clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", + clkrst3_base, BIT(4), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 3, 4); + + clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k", + clkrst3_base, BIT(5), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 3, 5); + + clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk", + clkrst3_base, BIT(6), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 3, 6); + + clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk", + clkrst3_base, BIT(7), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 3, 7); + + /* Periph6 */ + clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk", + clkrst6_base, BIT(0), CLK_SET_RATE_GATE); + PRCC_KCLK_STORE(clk, 6, 0); + + for_each_child_of_node(np, child) { + static struct clk_onecell_data clk_data; + + if (!of_node_cmp(child->name, "prcmu-clock")) { + clk_data.clks = prcmu_clk; + clk_data.clk_num = ARRAY_SIZE(prcmu_clk); + of_clk_add_provider(child, of_clk_src_onecell_get, &clk_data); + } + if (!of_node_cmp(child->name, "prcc-periph-clock")) + of_clk_add_provider(child, ux500_twocell_get, prcc_pclk); + + if (!of_node_cmp(child->name, "prcc-kernel-clock")) + of_clk_add_provider(child, ux500_twocell_get, prcc_kclk); + + if (!of_node_cmp(child->name, "rtc32k-clock")) + of_clk_add_provider(child, of_clk_src_simple_get, rtc_clk); + + if (!of_node_cmp(child->name, "smp-twd-clock")) + of_clk_add_provider(child, of_clk_src_simple_get, twd_clk); + } +} diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c index f26258869deb..20c8add90d11 100644 --- a/drivers/clk/ux500/u8540_clk.c +++ b/drivers/clk/ux500/u8540_clk.c @@ -83,7 +83,7 @@ void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, clk_register_clkdev(clk, NULL, "lcd"); clk_register_clkdev(clk, "lcd", "mcde"); - clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BML8580CLK, + clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT); clk_register_clkdev(clk, NULL, "bml"); diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 358a21c2d811..29b5d6777dc5 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2082,34 +2082,14 @@ static __init int samsung_gpiolib_init(void) int i, nr_chips; int group = 0; -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) /* - * This gpio driver includes support for device tree support and there - * are platforms using it. In order to maintain compatibility with those - * platforms, and to allow non-dt Exynos4210 platforms to use this - * gpiolib support, a check is added to find out if there is a active - * pin-controller driver support available. If it is available, this - * gpiolib support is ignored and the gpiolib support available in - * pin-controller driver is used. This is a temporary check and will go - * away when all of the Exynos4210 platforms have switched to using - * device tree and the pin-ctrl driver. - */ - struct device_node *pctrl_np; - static const struct of_device_id exynos_pinctrl_ids[] = { - { .compatible = "samsung,s3c2412-pinctrl", }, - { .compatible = "samsung,s3c2416-pinctrl", }, - { .compatible = "samsung,s3c2440-pinctrl", }, - { .compatible = "samsung,s3c2450-pinctrl", }, - { .compatible = "samsung,exynos4210-pinctrl", }, - { .compatible = "samsung,exynos4x12-pinctrl", }, - { .compatible = "samsung,exynos5250-pinctrl", }, - { .compatible = "samsung,exynos5440-pinctrl", }, - { } - }; - for_each_matching_node(pctrl_np, exynos_pinctrl_ids) - if (pctrl_np && of_device_is_available(pctrl_np)) - return -ENODEV; -#endif + * Currently there are two drivers that can provide GPIO support for + * Samsung SoCs. For device tree enabled platforms, the new + * pinctrl-samsung driver is used, providing both GPIO and pin control + * interfaces. For legacy (non-DT) platforms this driver is used. + */ + if (of_have_populated_dt()) + return -ENODEV; samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs)); diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c index 2bbb00404cf5..8e21ae0bab46 100644 --- a/drivers/irqchip/irq-vic.c +++ b/drivers/irqchip/irq-vic.c @@ -469,6 +469,8 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, int __init vic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *regs; + u32 interrupt_mask = ~0; + u32 wakeup_mask = ~0; if (WARN(parent, "non-root VICs are not supported")) return -EINVAL; @@ -477,10 +479,13 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) if (WARN_ON(!regs)) return -EIO; + of_property_read_u32(node, "valid-mask", &interrupt_mask); + of_property_read_u32(node, "valid-wakeup-mask", &wakeup_mask); + /* * Passing 0 as first IRQ makes the simple domain allocate descriptors */ - __vic_init(regs, 0, ~0, ~0, node); + __vic_init(regs, 0, interrupt_mask, wakeup_mask, node); return 0; } diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 53f371dcbb6e..b9ce60c301de 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -480,7 +480,6 @@ static struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true), CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true), CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true), - CLK_MGT_ENTRY(BML8580CLK, PLL_DIV, true), CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true), CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true), CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true), diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index 4f6f0fa5d3b7..7cc32a8ff01c 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -32,7 +32,6 @@ #define PRCM_PER7CLK_MGT (0x040) #define PRCM_LCDCLK_MGT (0x044) #define PRCM_BMLCLK_MGT (0x04C) -#define PRCM_BML8580CLK_MGT (0x108) #define PRCM_HSITXCLK_MGT (0x050) #define PRCM_HSIRXCLK_MGT (0x054) #define PRCM_HDMICLK_MGT (0x058) diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index c2aada71c915..0846922b2316 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1747,7 +1747,12 @@ static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq, irq_set_chip_data(irq, pcs_soc); irq_set_chip_and_handler(irq, &pcs->chip, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + irq_set_noprobe(irq); +#endif return 0; } diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 4919afa4125e..1adff32e40e2 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -47,10 +47,10 @@ static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); - clk_enable(usb_clk); + clk_prepare_enable(usb_clk); mdelay(2); /* let the bus clock stabilise */ - clk_enable(clk); + clk_prepare_enable(clk); if (info != NULL) { info->hcd = hcd; @@ -75,8 +75,8 @@ static void s3c2410_stop_hc(struct platform_device *dev) (info->enable_oc)(info, 0); } - clk_disable(clk); - clk_disable(usb_clk); + clk_disable_unprepare(clk); + clk_disable_unprepare(usb_clk); } /* ohci_s3c2410_hub_status_data diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 59256b12f746..c844499e4479 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -259,7 +259,7 @@ static int ux500_probe(struct platform_device *pdev) goto err1; } - clk = clk_get(&pdev->dev, "usb"); + clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); diff --git a/include/dt-bindings/mfd/dbx500-prcmu.h b/include/dt-bindings/mfd/dbx500-prcmu.h new file mode 100644 index 000000000000..552a2d174f01 --- /dev/null +++ b/include/dt-bindings/mfd/dbx500-prcmu.h @@ -0,0 +1,83 @@ +/* + * This header provides constants for the PRCMU bindings. + * + */ + +#ifndef _DT_BINDINGS_MFD_PRCMU_H +#define _DT_BINDINGS_MFD_PRCMU_H + +/* + * Clock identifiers. + */ +#define ARMCLK 0 +#define PRCMU_ACLK 1 +#define PRCMU_SVAMMCSPCLK 2 +#define PRCMU_SDMMCHCLK 2 /* DBx540 only. */ +#define PRCMU_SIACLK 3 +#define PRCMU_SIAMMDSPCLK 3 /* DBx540 only. */ +#define PRCMU_SGACLK 4 +#define PRCMU_UARTCLK 5 +#define PRCMU_MSP02CLK 6 +#define PRCMU_MSP1CLK 7 +#define PRCMU_I2CCLK 8 +#define PRCMU_SDMMCCLK 9 +#define PRCMU_SLIMCLK 10 +#define PRCMU_CAMCLK 10 /* DBx540 only. */ +#define PRCMU_PER1CLK 11 +#define PRCMU_PER2CLK 12 +#define PRCMU_PER3CLK 13 +#define PRCMU_PER5CLK 14 +#define PRCMU_PER6CLK 15 +#define PRCMU_PER7CLK 16 +#define PRCMU_LCDCLK 17 +#define PRCMU_BMLCLK 18 +#define PRCMU_HSITXCLK 19 +#define PRCMU_HSIRXCLK 20 +#define PRCMU_HDMICLK 21 +#define PRCMU_APEATCLK 22 +#define PRCMU_APETRACECLK 23 +#define PRCMU_MCDECLK 24 +#define PRCMU_IPI2CCLK 25 +#define PRCMU_DSIALTCLK 26 +#define PRCMU_DMACLK 27 +#define PRCMU_B2R2CLK 28 +#define PRCMU_TVCLK 29 +#define SPARE_UNIPROCLK 30 +#define PRCMU_SSPCLK 31 +#define PRCMU_RNGCLK 32 +#define PRCMU_UICCCLK 33 +#define PRCMU_G1CLK 34 /* DBx540 only. */ +#define PRCMU_HVACLK 35 /* DBx540 only. */ +#define PRCMU_SPARE1CLK 36 +#define PRCMU_SPARE2CLK 37 + +#define PRCMU_NUM_REG_CLOCKS 38 + +#define PRCMU_RTCCLK PRCMU_NUM_REG_CLOCKS +#define PRCMU_SYSCLK 39 +#define PRCMU_CDCLK 40 +#define PRCMU_TIMCLK 41 +#define PRCMU_PLLSOC0 42 +#define PRCMU_PLLSOC1 43 +#define PRCMU_ARMSS 44 +#define PRCMU_PLLDDR 45 + +/* DSI Clocks */ +#define PRCMU_PLLDSI 46 +#define PRCMU_DSI0CLK 47 +#define PRCMU_DSI1CLK 48 +#define PRCMU_DSI0ESCCLK 49 +#define PRCMU_DSI1ESCCLK 50 +#define PRCMU_DSI2ESCCLK 51 + +/* LCD DSI PLL - Ux540 only */ +#define PRCMU_PLLDSI_LCD 52 +#define PRCMU_DSI0CLK_LCD 53 +#define PRCMU_DSI1CLK_LCD 54 +#define PRCMU_DSI0ESCCLK_LCD 55 +#define PRCMU_DSI1ESCCLK_LCD 56 +#define PRCMU_DSI2ESCCLK_LCD 57 + +#define PRCMU_NUM_CLKS 58 + +#endif diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index ca0790fba2f5..060e11256fbc 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -12,6 +12,8 @@ #include <linux/notifier.h> #include <linux/err.h> +#include <dt-bindings/mfd/dbx500-prcmu.h> /* For clock identifiers */ + /* Offset for the firmware version within the TCPM */ #define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4 #define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8 @@ -94,74 +96,6 @@ enum prcmu_wakeup_index { #define PRCMU_CLKSRC_ARMCLKFIX 0x46 #define PRCMU_CLKSRC_HDMICLK 0x47 -/* - * Clock identifiers. - */ -enum prcmu_clock { - PRCMU_SGACLK, - PRCMU_UARTCLK, - PRCMU_MSP02CLK, - PRCMU_MSP1CLK, - PRCMU_I2CCLK, - PRCMU_SDMMCCLK, - PRCMU_SPARE1CLK, - PRCMU_SLIMCLK, - PRCMU_PER1CLK, - PRCMU_PER2CLK, - PRCMU_PER3CLK, - PRCMU_PER5CLK, - PRCMU_PER6CLK, - PRCMU_PER7CLK, - PRCMU_LCDCLK, - PRCMU_BMLCLK, - PRCMU_HSITXCLK, - PRCMU_HSIRXCLK, - PRCMU_HDMICLK, - PRCMU_APEATCLK, - PRCMU_APETRACECLK, - PRCMU_MCDECLK, - PRCMU_IPI2CCLK, - PRCMU_DSIALTCLK, - PRCMU_DMACLK, - PRCMU_B2R2CLK, - PRCMU_TVCLK, - PRCMU_SSPCLK, - PRCMU_RNGCLK, - PRCMU_UICCCLK, - PRCMU_PWMCLK, - PRCMU_IRDACLK, - PRCMU_IRRCCLK, - PRCMU_SIACLK, - PRCMU_SVACLK, - PRCMU_ACLK, - PRCMU_HVACLK, /* Ux540 only */ - PRCMU_G1CLK, /* Ux540 only */ - PRCMU_SDMMCHCLK, - PRCMU_CAMCLK, - PRCMU_BML8580CLK, - PRCMU_NUM_REG_CLOCKS, - PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, - PRCMU_CDCLK, - PRCMU_TIMCLK, - PRCMU_PLLSOC0, - PRCMU_PLLSOC1, - PRCMU_ARMSS, - PRCMU_PLLDDR, - PRCMU_PLLDSI, - PRCMU_DSI0CLK, - PRCMU_DSI1CLK, - PRCMU_DSI0ESCCLK, - PRCMU_DSI1ESCCLK, - PRCMU_DSI2ESCCLK, - /* LCD DSI PLL - Ux540 only */ - PRCMU_PLLDSI_LCD, - PRCMU_DSI0CLK_LCD, - PRCMU_DSI1CLK_LCD, - PRCMU_DSI0ESCCLK_LCD, - PRCMU_DSI1ESCCLK_LCD, - PRCMU_DSI2ESCCLK_LCD, -}; - /** * enum prcmu_wdog_id - PRCMU watchdog IDs * @PRCMU_WDOG_ALL: use all timers diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h index 9d98f3aaa16c..97baf831e071 100644 --- a/include/linux/platform_data/clk-ux500.h +++ b/include/linux/platform_data/clk-ux500.h @@ -10,6 +10,9 @@ #ifndef __CLK_UX500_H #define __CLK_UX500_H +void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); + void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, u32 clkrst5_base, u32 clkrst6_base); void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, |