diff options
| -rw-r--r-- | drivers/staging/media/hantro/hantro_h264.c | 122 | ||||
| -rw-r--r-- | drivers/staging/media/hantro/hantro_hw.h | 2 |
2 files changed, 110 insertions, 14 deletions
diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c index 7377fc26f780..4e9a0ecf5c13 100644 --- a/drivers/staging/media/hantro/hantro_h264.c +++ b/drivers/staging/media/hantro/hantro_h264.c @@ -22,6 +22,12 @@ #define POC_BUFFER_SIZE 34 #define SCALING_LIST_SIZE (6 * 16 + 2 * 64) +/* + * For valid and long term reference marking, index are reversed, so bit 31 + * indicates the status of the picture 0. + */ +#define REF_BIT(i) BIT(32 - 1 - (i)) + /* Data structure describing auxiliary buffer format. */ struct hantro_h264_dec_priv_tbl { u32 cabac_table[CABAC_INIT_BUFFER_SIZE]; @@ -227,6 +233,7 @@ static void prepare_table(struct hantro_ctx *ctx) { const struct hantro_h264_dec_ctrls *ctrls = &ctx->h264_dec.ctrls; const struct v4l2_ctrl_h264_decode_params *dec_param = ctrls->decode; + const struct v4l2_ctrl_h264_sps *sps = ctrls->sps; struct hantro_h264_dec_priv_tbl *tbl = ctx->h264_dec.priv.cpu; const struct v4l2_h264_dpb_entry *dpb = ctx->h264_dec.dpb; u32 dpb_longterm = 0; @@ -237,20 +244,45 @@ static void prepare_table(struct hantro_ctx *ctx) tbl->poc[i * 2] = dpb[i].top_field_order_cnt; tbl->poc[i * 2 + 1] = dpb[i].bottom_field_order_cnt; + if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_VALID)) + continue; + /* * Set up bit maps of valid and long term DPBs. - * NOTE: The bits are reversed, i.e. MSb is DPB 0. + * NOTE: The bits are reversed, i.e. MSb is DPB 0. For frame + * decoding, bit 31 to 15 are used, while for field decoding, + * all bits are used, with bit 31 being a top field, 30 a bottom + * field and so on. */ - if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) - dpb_valid |= BIT(HANTRO_H264_DPB_SIZE - 1 - i); - if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM) - dpb_longterm |= BIT(HANTRO_H264_DPB_SIZE - 1 - i); + if (dec_param->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC) { + if (dpb[i].fields & V4L2_H264_TOP_FIELD_REF) + dpb_valid |= REF_BIT(i * 2); + + if (dpb[i].fields & V4L2_H264_BOTTOM_FIELD_REF) + dpb_valid |= REF_BIT(i * 2 + 1); + + if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM) { + dpb_longterm |= REF_BIT(i * 2); + dpb_longterm |= REF_BIT(i * 2 + 1); + } + } else { + dpb_valid |= REF_BIT(i); + + if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM) + dpb_longterm |= REF_BIT(i); + } + } + ctx->h264_dec.dpb_valid = dpb_valid; + ctx->h264_dec.dpb_longterm = dpb_longterm; + + if ((dec_param->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC) || + !(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD)) { + tbl->poc[32] = ctx->h264_dec.cur_poc; + tbl->poc[33] = 0; + } else { + tbl->poc[32] = dec_param->top_field_order_cnt; + tbl->poc[33] = dec_param->bottom_field_order_cnt; } - ctx->h264_dec.dpb_valid = dpb_valid << 16; - ctx->h264_dec.dpb_longterm = dpb_longterm << 16; - - tbl->poc[32] = dec_param->top_field_order_cnt; - tbl->poc[33] = dec_param->bottom_field_order_cnt; assemble_scaling_list(ctx); } @@ -326,6 +358,8 @@ dma_addr_t hantro_h264_get_ref_buf(struct hantro_ctx *ctx, { struct v4l2_h264_dpb_entry *dpb = ctx->h264_dec.dpb; dma_addr_t dma_addr = 0; + s32 cur_poc = ctx->h264_dec.cur_poc; + u32 flags; if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) dma_addr = hantro_get_ref(ctx, dpb[dpb_idx].reference_ts); @@ -343,7 +377,12 @@ dma_addr_t hantro_h264_get_ref_buf(struct hantro_ctx *ctx, dma_addr = hantro_get_dec_buf_addr(ctx, buf); } - return dma_addr; + flags = dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD ? 0x2 : 0; + flags |= abs(dpb[dpb_idx].top_field_order_cnt - cur_poc) < + abs(dpb[dpb_idx].bottom_field_order_cnt - cur_poc) ? + 0x1 : 0; + + return dma_addr | flags; } u16 hantro_h264_get_ref_nbr(struct hantro_ctx *ctx, unsigned int dpb_idx) @@ -355,6 +394,47 @@ u16 hantro_h264_get_ref_nbr(struct hantro_ctx *ctx, unsigned int dpb_idx) return dpb->frame_num; } +/* + * Removes all references with the same parity as the current picture from the + * reference list. The remaining list will have references with the opposite + * parity. This is effectively a deduplication of references since each buffer + * stores two fields. For this reason, each buffer is found twice in the + * reference list. + * + * This technique has been chosen through trial and error. This simple approach + * resulted in the highest conformance score. Note that this method may suffer + * worse quality in the case an opposite reference frame has been lost. If this + * becomes a problem in the future, it should be possible to add a preprocessing + * to identify un-paired fields and avoid removing them. + */ +static void deduplicate_reflist(struct v4l2_h264_reflist_builder *b, + struct v4l2_h264_reference *reflist) +{ + int write_idx = 0; + int i; + + if (b->cur_pic_fields == V4L2_H264_FRAME_REF) { + write_idx = b->num_valid; + goto done; + } + + for (i = 0; i < b->num_valid; i++) { + if (!(b->cur_pic_fields == reflist[i].fields)) { + reflist[write_idx++] = reflist[i]; + continue; + } + } + +done: + /* Should not happen unless we have a bug in the reflist builder. */ + if (WARN_ON(write_idx > 16)) + write_idx = 16; + + /* Clear the remaining, some streams fails otherwise */ + for (; write_idx < 16; write_idx++) + reflist[write_idx].index = 15; +} + int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx) { struct hantro_h264_dec_hw_ctx *h264_ctx = &ctx->h264_dec; @@ -386,15 +466,29 @@ int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx) /* Update the DPB with new refs. */ update_dpb(ctx); - /* Prepare data in memory. */ - prepare_table(ctx); - /* Build the P/B{0,1} ref lists. */ v4l2_h264_init_reflist_builder(&reflist_builder, ctrls->decode, ctrls->sps, ctx->h264_dec.dpb); + h264_ctx->cur_poc = reflist_builder.cur_pic_order_count; + + /* Prepare data in memory. */ + prepare_table(ctx); + v4l2_h264_build_p_ref_list(&reflist_builder, h264_ctx->reflists.p); v4l2_h264_build_b_ref_lists(&reflist_builder, h264_ctx->reflists.b0, h264_ctx->reflists.b1); + + /* + * Reduce ref lists to at most 16 entries, Hantro hardware will deduce + * the actual picture lists in field through the dpb_valid, + * dpb_longterm bitmap along with the current frame parity. + */ + if (reflist_builder.cur_pic_fields != V4L2_H264_FRAME_REF) { + deduplicate_reflist(&reflist_builder, h264_ctx->reflists.p); + deduplicate_reflist(&reflist_builder, h264_ctx->reflists.b0); + deduplicate_reflist(&reflist_builder, h264_ctx->reflists.b1); + } + return 0; } diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h index 0b5b9da86c43..52a960f6fa4a 100644 --- a/drivers/staging/media/hantro/hantro_hw.h +++ b/drivers/staging/media/hantro/hantro_hw.h @@ -83,6 +83,7 @@ struct hantro_h264_dec_reflists { * @ctrls: V4L2 controls attached to a run * @dpb_longterm: DPB long-term * @dpb_valid: DPB valid + * @cur_poc: Current picture order count */ struct hantro_h264_dec_hw_ctx { struct hantro_aux_buf priv; @@ -91,6 +92,7 @@ struct hantro_h264_dec_hw_ctx { struct hantro_h264_dec_ctrls ctrls; u32 dpb_longterm; u32 dpb_valid; + s32 cur_poc; }; /** |