diff options
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm6350.dtsi | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 300ced5cda57..802d7f494162 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,gcc-sm6350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm6350-camcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,icc.h> @@ -1435,6 +1436,95 @@ }; }; + cci0: cci@ac4a000 { + compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SOC_AHB_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_0_CLK>, + <&camcc CAMCC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CCI_0_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SOC_AHB_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_1_CLK>, + <&camcc CAMCC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CCI_1_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-0 = <&cci2_default>; + pinctrl-1 = <&cci2_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* SM6350 seems to have cci1_i2c1 on gpio2 & gpio3 but unused downstream */ + }; + camcc: clock-controller@ad00000 { compatible = "qcom,sm6350-camcc"; reg = <0 0x0ad00000 0 0x16000>; @@ -1522,6 +1612,48 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; + cci0_default: cci0-default-state { + pins = "gpio39", "gpio40"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + pins = "gpio39", "gpio40"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + pins = "gpio41", "gpio42"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + pins = "gpio41", "gpio42"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + pins = "gpio43", "gpio44"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + pins = "gpio43", "gpio44"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + sdc2_off_state: sdc2-off-state { clk-pins { pins = "sdc2_clk"; |