Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

1 files changed, 150 insertions, 77 deletions

diff --git a/tools/testing/selftests/bpf/test_offload.py b/tools/testing/selftests/bpf/test_offload.py
index 84bea3985d64..425f9ed27c3b 100755
--- a/tools/testing/selftests/bpf/test_offload.py
+++ b/tools/testing/selftests/bpf/test_offload.py
@@ -1,6 +1,7 @@
 #!/usr/bin/python3
 
 # Copyright (C) 2017 Netronome Systems, Inc.
+# Copyright (c) 2019 Mellanox Technologies. All rights reserved
 #
 # This software is licensed under the GNU General License Version 2,
 # June 1991 as shown in the file COPYING in the top-level directory of this
@@ -15,10 +16,12 @@
 
 from datetime import datetime
 import argparse
+import errno
 import json
 import os
 import pprint
 import random
+import re
 import string
 import struct
 import subprocess
@@ -306,6 +309,8 @@ class DebugfsDir:
 
         _, out = cmd('ls ' + path)
         for f in out.split():
+            if f == "ports":
+                continue
             p = os.path.join(path, f)
             if os.path.isfile(p):
                 _, out = cmd('cat %s/%s' % (path, f))
@@ -321,42 +326,112 @@ class DebugfsDir:
 
         return dfs
 
-class NetdevSim:
+class NetdevSimDev:
     """
-    Class for netdevsim netdevice and its attributes.
+    Class for netdevsim bus device and its attributes.
     """
 
-    def __init__(self, link=None):
-        self.link = link
+    def __init__(self, port_count=1):
+        addr = 0
+        while True:
+            try:
+                with open("/sys/bus/netdevsim/new_device", "w") as f:
+                    f.write("%u %u" % (addr, port_count))
+            except OSError as e:
+                if e.errno == errno.ENOSPC:
+                    addr += 1
+                    continue
+                raise e
+            break
+        self.addr = addr
+
+        # As probe of netdevsim device might happen from a workqueue,
+        # so wait here until all netdevs appear.
+        self.wait_for_netdevs(port_count)
+
+        ret, out = cmd("udevadm settle", fail=False)
+        if ret:
+            raise Exception("udevadm settle failed")
+        ifnames = self.get_ifnames()
 
-        self.dev = self._netdevsim_create()
         devs.append(self)
+        self.dfs_dir = "/sys/kernel/debug/netdevsim/netdevsim%u/" % addr
+
+        self.nsims = []
+        for port_index in range(port_count):
+            self.nsims.append(NetdevSim(self, port_index, ifnames[port_index]))
+
+    def get_ifnames(self):
+        ifnames = []
+        listdir = os.listdir("/sys/bus/netdevsim/devices/netdevsim%u/net/" % self.addr)
+        for ifname in listdir:
+            ifnames.append(ifname)
+        ifnames.sort()
+        return ifnames
+
+    def wait_for_netdevs(self, port_count):
+        timeout = 5
+        timeout_start = time.time()
+
+        while True:
+            try:
+                ifnames = self.get_ifnames()
+            except FileNotFoundError as e:
+                ifnames = []
+            if len(ifnames) == port_count:
+                break
+            if time.time() < timeout_start + timeout:
+                continue
+            raise Exception("netdevices did not appear within timeout")
 
-        self.ns = ""
+    def dfs_num_bound_progs(self):
+        path = os.path.join(self.dfs_dir, "bpf_bound_progs")
+        _, progs = cmd('ls %s' % (path))
+        return len(progs.split())
 
-        self.dfs_dir = '/sys/kernel/debug/netdevsim/%s' % (self.dev['ifname'])
-        self.sdev_dir = self.dfs_dir + '/sdev/'
-        self.dfs_refresh()
+    def dfs_get_bound_progs(self, expected):
+        progs = DebugfsDir(os.path.join(self.dfs_dir, "bpf_bound_progs"))
+        if expected is not None:
+            if len(progs) != expected:
+                fail(True, "%d BPF programs bound, expected %d" %
+                     (len(progs), expected))
+        return progs
 
-    def __getitem__(self, key):
-        return self.dev[key]
+    def remove(self):
+        with open("/sys/bus/netdevsim/del_device", "w") as f:
+            f.write("%u" % self.addr)
+        devs.remove(self)
 
-    def _netdevsim_create(self):
-        link = "" if self.link is None else "link " + self.link.dev['ifname']
-        _, old  = ip("link show")
-        ip("link add sim%d {link} type netdevsim".format(link=link))
-        _, new  = ip("link show")
+    def remove_nsim(self, nsim):
+        self.nsims.remove(nsim)
+        with open("/sys/bus/netdevsim/devices/netdevsim%u/del_port" % self.addr ,"w") as f:
+            f.write("%u" % nsim.port_index)
 
-        for dev in new:
-            f = filter(lambda x: x["ifname"] == dev["ifname"], old)
-            if len(list(f)) == 0:
-                return dev
+class NetdevSim:
+    """
+    Class for netdevsim netdevice and its attributes.
+    """
+
+    def __init__(self, nsimdev, port_index, ifname):
+        # In case udev renamed the netdev to according to new schema,
+        # check if the name matches the port_index.
+        nsimnamere = re.compile("eni\d+np(\d+)")
+        match = nsimnamere.match(ifname)
+        if match and int(match.groups()[0]) != port_index + 1:
+            raise Exception("netdevice name mismatches the expected one")
+
+        self.nsimdev = nsimdev
+        self.port_index = port_index
+        self.ns = ""
+        self.dfs_dir = "%s/ports/%u/" % (nsimdev.dfs_dir, port_index)
+        self.dfs_refresh()
+        _, [self.dev] = ip("link show dev %s" % ifname)
 
-        raise Exception("failed to create netdevsim device")
+    def __getitem__(self, key):
+        return self.dev[key]
 
     def remove(self):
-        devs.remove(self)
-        ip("link del dev %s" % (self.dev["ifname"]), ns=self.ns)
+        self.nsimdev.remove_nsim(self)
 
     def dfs_refresh(self):
         self.dfs = DebugfsDir(self.dfs_dir)
@@ -367,22 +442,9 @@ class NetdevSim:
         _, data = cmd('cat %s' % (path))
         return data.strip()
 
-    def dfs_num_bound_progs(self):
-        path = os.path.join(self.sdev_dir, "bpf_bound_progs")
-        _, progs = cmd('ls %s' % (path))
-        return len(progs.split())
-
-    def dfs_get_bound_progs(self, expected):
-        progs = DebugfsDir(os.path.join(self.sdev_dir, "bpf_bound_progs"))
-        if expected is not None:
-            if len(progs) != expected:
-                fail(True, "%d BPF programs bound, expected %d" %
-                     (len(progs), expected))
-        return progs
-
     def wait_for_flush(self, bound=0, total=0, n_retry=20):
         for i in range(n_retry):
-            nbound = self.dfs_num_bound_progs()
+            nbound = self.nsimdev.dfs_num_bound_progs()
             nprogs = len(bpftool_prog_list())
             if nbound == bound and nprogs == total:
                 return
@@ -612,7 +674,7 @@ def test_spurios_extack(sim, obj, skip_hw, needle):
                             include_stderr=True)
     check_no_extack(res, needle)
 
-def test_multi_prog(sim, obj, modename, modeid):
+def test_multi_prog(simdev, sim, obj, modename, modeid):
     start_test("Test multi-attachment XDP - %s + offload..." %
                (modename or "default", ))
     sim.set_xdp(obj, "offload")
@@ -668,11 +730,12 @@ def test_multi_prog(sim, obj, modename, modeid):
     check_multi_basic(two_xdps)
 
     start_test("Test multi-attachment XDP - device remove...")
-    sim.remove()
+    simdev.remove()
 
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     sim.set_ethtool_tc_offloads(True)
-    return sim
+    return [simdev, sim]
 
 # Parse command line
 parser = argparse.ArgumentParser()
@@ -729,12 +792,14 @@ try:
     bytecode = bpf_bytecode("1,6 0 0 4294967295,")
 
     start_test("Test destruction of generic XDP...")
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     sim.set_xdp(obj, "generic")
-    sim.remove()
+    simdev.remove()
     bpftool_prog_list_wait(expected=0)
 
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     sim.tc_add_ingress()
 
     start_test("Test TC non-offloaded...")
@@ -744,7 +809,7 @@ try:
     start_test("Test TC non-offloaded isn't getting bound...")
     ret, _ = sim.cls_bpf_add_filter(obj, fail=False)
     fail(ret != 0, "Software TC filter did not load")
-    sim.dfs_get_bound_progs(expected=0)
+    simdev.dfs_get_bound_progs(expected=0)
 
     sim.tc_flush_filters()
 
@@ -761,7 +826,7 @@ try:
     start_test("Test TC offload by default...")
     ret, _ = sim.cls_bpf_add_filter(obj, fail=False)
     fail(ret != 0, "Software TC filter did not load")
-    sim.dfs_get_bound_progs(expected=0)
+    simdev.dfs_get_bound_progs(expected=0)
     ingress = sim.tc_show_ingress(expected=1)
     fltr = ingress[0]
     fail(not fltr["in_hw"], "Filter not offloaded by default")
@@ -771,7 +836,7 @@ try:
     start_test("Test TC cBPF bytcode tries offload by default...")
     ret, _ = sim.cls_bpf_add_filter(bytecode, fail=False)
     fail(ret != 0, "Software TC filter did not load")
-    sim.dfs_get_bound_progs(expected=0)
+    simdev.dfs_get_bound_progs(expected=0)
     ingress = sim.tc_show_ingress(expected=1)
     fltr = ingress[0]
     fail(not fltr["in_hw"], "Bytecode not offloaded by default")
@@ -839,7 +904,7 @@ try:
     check_verifier_log(err, "[netdevsim] Hello from netdevsim!")
 
     start_test("Test TC offload basics...")
-    dfs = sim.dfs_get_bound_progs(expected=1)
+    dfs = simdev.dfs_get_bound_progs(expected=1)
     progs = bpftool_prog_list(expected=1)
     ingress = sim.tc_show_ingress(expected=1)
 
@@ -874,18 +939,20 @@ try:
 
     start_test("Test destroying device gets rid of TC filters...")
     sim.cls_bpf_add_filter(obj, skip_sw=True)
-    sim.remove()
+    simdev.remove()
     bpftool_prog_list_wait(expected=0)
 
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     sim.set_ethtool_tc_offloads(True)
 
     start_test("Test destroying device gets rid of XDP...")
     sim.set_xdp(obj, "offload")
-    sim.remove()
+    simdev.remove()
     bpftool_prog_list_wait(expected=0)
 
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     sim.set_ethtool_tc_offloads(True)
 
     start_test("Test XDP prog reporting...")
@@ -971,7 +1038,7 @@ try:
     check_verifier_log(err, "[netdevsim] Hello from netdevsim!")
 
     start_test("Test XDP offload is device bound...")
-    dfs = sim.dfs_get_bound_progs(expected=1)
+    dfs = simdev.dfs_get_bound_progs(expected=1)
     dprog = dfs[0]
 
     fail(prog["id"] != link_xdp["id"], "Program IDs don't match")
@@ -990,7 +1057,8 @@ try:
     bpftool_prog_list_wait(expected=0)
 
     start_test("Test attempt to use a program for a wrong device...")
-    sim2 = NetdevSim()
+    simdev2 = NetdevSimDev()
+    sim2, = simdev2.nsims
     sim2.set_xdp(obj, "offload")
     pin_file, pinned = pin_prog("/sys/fs/bpf/tmp")
 
@@ -998,7 +1066,7 @@ try:
                               fail=False, include_stderr=True)
     fail(ret == 0, "Pinned program loaded for a different device accepted")
     check_extack_nsim(err, "program bound to different dev.", args)
-    sim2.remove()
+    simdev2.remove()
     ret, _, err = sim.set_xdp(pinned, "offload",
                               fail=False, include_stderr=True)
     fail(ret == 0, "Pinned program loaded for a removed device accepted")
@@ -1006,9 +1074,9 @@ try:
     rm(pin_file)
     bpftool_prog_list_wait(expected=0)
 
-    sim = test_multi_prog(sim, obj, "", 1)
-    sim = test_multi_prog(sim, obj, "drv", 1)
-    sim = test_multi_prog(sim, obj, "generic", 2)
+    simdev, sim = test_multi_prog(simdev, sim, obj, "", 1)
+    simdev, sim = test_multi_prog(simdev, sim, obj, "drv", 1)
+    simdev, sim = test_multi_prog(simdev, sim, obj, "generic", 2)
 
     start_test("Test mixing of TC and XDP...")
     sim.tc_add_ingress()
@@ -1055,15 +1123,15 @@ try:
 
     start_test("Test if netdev removal waits for translation...")
     delay_msec = 500
-    sim.dfs["bpf_bind_verifier_delay"] = delay_msec
+    sim.dfs["dev/bpf_bind_verifier_delay"] = delay_msec
     start = time.time()
     cmd_line = "tc filter add dev %s ingress bpf %s da skip_sw" % \
                (sim['ifname'], obj)
     tc_proc = cmd(cmd_line, background=True, fail=False)
     # Wait for the verifier to start
-    while sim.dfs_num_bound_progs() <= 2:
+    while simdev.dfs_num_bound_progs() <= 2:
         pass
-    sim.remove()
+    simdev.remove()
     end = time.time()
     ret, _ = cmd_result(tc_proc, fail=False)
     time_diff = end - start
@@ -1078,7 +1146,8 @@ try:
     clean_up()
     bpftool_prog_list_wait(expected=0)
 
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     map_obj = bpf_obj("sample_map_ret0.o")
     start_test("Test loading program with maps...")
     sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON
@@ -1100,7 +1169,7 @@ try:
 
     prog_file, _ = pin_prog("/sys/fs/bpf/tmp_prog")
     map_file, _ = pin_map("/sys/fs/bpf/tmp_map", idx=1, expected=2)
-    sim.remove()
+    simdev.remove()
 
     start_test("Test bpftool bound info reporting (removed dev)...")
     check_dev_info_removed(prog_file=prog_file, map_file=map_file)
@@ -1109,7 +1178,8 @@ try:
     clean_up()
     bpftool_prog_list_wait(expected=0)
 
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
 
     start_test("Test map update (no flags)...")
     sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON
@@ -1190,27 +1260,29 @@ try:
     start_test("Test map remove...")
     sim.unset_xdp("offload")
     bpftool_map_list_wait(expected=0)
-    sim.remove()
+    simdev.remove()
 
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON
-    sim.remove()
+    simdev.remove()
     bpftool_map_list_wait(expected=0)
 
     start_test("Test map creation fail path...")
-    sim = NetdevSim()
+    simdev = NetdevSimDev()
+    sim, = simdev.nsims
     sim.dfs["bpf_map_accept"] = "N"
     ret, _ = sim.set_xdp(map_obj, "offload", JSON=False, fail=False)
     fail(ret == 0,
          "netdevsim didn't refuse to create a map with offload disabled")
 
-    sim.remove()
+    simdev.remove()
 
     start_test("Test multi-dev ASIC program reuse...")
-    simA = NetdevSim()
-    simB1 = NetdevSim()
-    simB2 = NetdevSim(link=simB1)
-    simB3 = NetdevSim(link=simB1)
+    simdevA = NetdevSimDev()
+    simA, = simdevA.nsims
+    simdevB = NetdevSimDev(3)
+    simB1, simB2, simB3 = simdevB.nsims
     sims = (simA, simB1, simB2, simB3)
     simB = (simB1, simB2, simB3)
 
@@ -1222,13 +1294,13 @@ try:
     progB = bpf_pinned("/sys/fs/bpf/nsimB")
 
     simA.set_xdp(progA, "offload", JSON=False)
-    for d in simB:
+    for d in simdevB.nsims:
         d.set_xdp(progB, "offload", JSON=False)
 
     start_test("Test multi-dev ASIC cross-dev replace...")
     ret, _ = simA.set_xdp(progB, "offload", force=True, JSON=False, fail=False)
     fail(ret == 0, "cross-ASIC program allowed")
-    for d in simB:
+    for d in simdevB.nsims:
         ret, _ = d.set_xdp(progA, "offload", force=True, JSON=False, fail=False)
         fail(ret == 0, "cross-ASIC program allowed")
 
@@ -1240,7 +1312,7 @@ try:
                                fail=False, include_stderr=True)
     fail(ret == 0, "cross-ASIC program allowed")
     check_extack_nsim(err, "program bound to different dev.", args)
-    for d in simB:
+    for d in simdevB.nsims:
         ret, _, err = d.set_xdp(progA, "offload", force=True, JSON=False,
                                 fail=False, include_stderr=True)
         fail(ret == 0, "cross-ASIC program allowed")
@@ -1277,7 +1349,7 @@ try:
     start_test("Test multi-dev ASIC cross-dev destruction...")
     bpftool_prog_list_wait(expected=2)
 
-    simA.remove()
+    simdevA.remove()
     bpftool_prog_list_wait(expected=1)
 
     ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"]
@@ -1295,6 +1367,7 @@ try:
     fail(ifnameB != simB3['ifname'], "program not bound to remaining device")
 
     simB3.remove()
+    simdevB.remove()
     bpftool_prog_list_wait(expected=0)
 
     start_test("Test multi-dev ASIC cross-dev destruction - orphaned...")