Add bridged amplifiers to cs42l43

Merge series from Charles Keepax <[email protected]>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

1 files changed, 70 insertions, 0 deletions

diff --git a/sound/soc/sof/intel/hda-stream.c b/sound/soc/sof/intel/hda-stream.c
index b387b1a69d7e..0c189d3b19c1 100644
--- a/sound/soc/sof/intel/hda-stream.c
+++ b/sound/soc/sof/intel/hda-stream.c
@@ -1063,3 +1063,73 @@ snd_pcm_uframes_t hda_dsp_stream_get_position(struct hdac_stream *hstream,
 
 	return pos;
 }
+
+#define merge_u64(u32_u, u32_l) (((u64)(u32_u) << 32) | (u32_l))
+
+/**
+ * hda_dsp_get_stream_llp - Retrieve the LLP (Linear Link Position) of the stream
+ * @sdev: SOF device
+ * @component: ASoC component
+ * @substream: PCM substream
+ *
+ * Returns the raw Linear Link Position value
+ */
+u64 hda_dsp_get_stream_llp(struct snd_sof_dev *sdev,
+			   struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream)
+{
+	struct hdac_stream *hstream = substream->runtime->private_data;
+	struct hdac_ext_stream *hext_stream = stream_to_hdac_ext_stream(hstream);
+	u32 llp_l, llp_u;
+
+	/*
+	 * The pplc_addr have been calculated during probe in
+	 * hda_dsp_stream_init():
+	 * pplc_addr = sdev->bar[HDA_DSP_PP_BAR] +
+	 *	       SOF_HDA_PPLC_BASE +
+	 *	       SOF_HDA_PPLC_MULTI * total_stream +
+	 *	       SOF_HDA_PPLC_INTERVAL * stream_index
+	 *
+	 * Use this pre-calculated address to avoid repeated re-calculation.
+	 */
+	llp_l = readl(hext_stream->pplc_addr + AZX_REG_PPLCLLPL);
+	llp_u = readl(hext_stream->pplc_addr + AZX_REG_PPLCLLPU);
+
+	/* Compensate the LLP counter with the saved offset */
+	if (hext_stream->pplcllpl || hext_stream->pplcllpu)
+		return merge_u64(llp_u, llp_l) -
+		       merge_u64(hext_stream->pplcllpu, hext_stream->pplcllpl);
+
+	return merge_u64(llp_u, llp_l);
+}
+
+/**
+ * hda_dsp_get_stream_ldp - Retrieve the LDP (Linear DMA Position) of the stream
+ * @sdev: SOF device
+ * @component: ASoC component
+ * @substream: PCM substream
+ *
+ * Returns the raw Linear Link Position value
+ */
+u64 hda_dsp_get_stream_ldp(struct snd_sof_dev *sdev,
+			   struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream)
+{
+	struct hdac_stream *hstream = substream->runtime->private_data;
+	struct hdac_ext_stream *hext_stream = stream_to_hdac_ext_stream(hstream);
+	u32 ldp_l, ldp_u;
+
+	/*
+	 * The pphc_addr have been calculated during probe in
+	 * hda_dsp_stream_init():
+	 * pphc_addr = sdev->bar[HDA_DSP_PP_BAR] +
+	 *	       SOF_HDA_PPHC_BASE +
+	 *	       SOF_HDA_PPHC_INTERVAL * stream_index
+	 *
+	 * Use this pre-calculated address to avoid repeated re-calculation.
+	 */
+	ldp_l = readl(hext_stream->pphc_addr + AZX_REG_PPHCLDPL);
+	ldp_u = readl(hext_stream->pphc_addr + AZX_REG_PPHCLDPU);
+
+	return ((u64)ldp_u << 32) | ldp_l;
+}