Add bridged amplifiers to cs42l43

Merge series from Charles Keepax <[email protected]>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

1 files changed, 31 insertions, 9 deletions

diff --git a/fs/xfs/libxfs/xfs_sb.c b/fs/xfs/libxfs/xfs_sb.c
index d991eec05436..73a4b895de67 100644
--- a/fs/xfs/libxfs/xfs_sb.c
+++ b/fs/xfs/libxfs/xfs_sb.c
@@ -530,7 +530,8 @@ xfs_validate_sb_common(
 	}
 
 	if (!xfs_validate_stripe_geometry(mp, XFS_FSB_TO_B(mp, sbp->sb_unit),
-			XFS_FSB_TO_B(mp, sbp->sb_width), 0, false))
+			XFS_FSB_TO_B(mp, sbp->sb_width), 0,
+			xfs_buf_daddr(bp) == XFS_SB_DADDR, false))
 		return -EFSCORRUPTED;
 
 	/*
@@ -1323,8 +1324,10 @@ xfs_sb_get_secondary(
 }
 
 /*
- * sunit, swidth, sectorsize(optional with 0) should be all in bytes,
- * so users won't be confused by values in error messages.
+ * sunit, swidth, sectorsize(optional with 0) should be all in bytes, so users
+ * won't be confused by values in error messages.  This function returns false
+ * if the stripe geometry is invalid and the caller is unable to repair the
+ * stripe configuration later in the mount process.
  */
 bool
 xfs_validate_stripe_geometry(
@@ -1332,20 +1335,21 @@ xfs_validate_stripe_geometry(
 	__s64			sunit,
 	__s64			swidth,
 	int			sectorsize,
+	bool			may_repair,
 	bool			silent)
 {
 	if (swidth > INT_MAX) {
 		if (!silent)
 			xfs_notice(mp,
 "stripe width (%lld) is too large", swidth);
-		return false;
+		goto check_override;
 	}
 
 	if (sunit > swidth) {
 		if (!silent)
 			xfs_notice(mp,
 "stripe unit (%lld) is larger than the stripe width (%lld)", sunit, swidth);
-		return false;
+		goto check_override;
 	}
 
 	if (sectorsize && (int)sunit % sectorsize) {
@@ -1353,21 +1357,21 @@ xfs_validate_stripe_geometry(
 			xfs_notice(mp,
 "stripe unit (%lld) must be a multiple of the sector size (%d)",
 				   sunit, sectorsize);
-		return false;
+		goto check_override;
 	}
 
 	if (sunit && !swidth) {
 		if (!silent)
 			xfs_notice(mp,
 "invalid stripe unit (%lld) and stripe width of 0", sunit);
-		return false;
+		goto check_override;
 	}
 
 	if (!sunit && swidth) {
 		if (!silent)
 			xfs_notice(mp,
 "invalid stripe width (%lld) and stripe unit of 0", swidth);
-		return false;
+		goto check_override;
 	}
 
 	if (sunit && (int)swidth % (int)sunit) {
@@ -1375,9 +1379,27 @@ xfs_validate_stripe_geometry(
 			xfs_notice(mp,
 "stripe width (%lld) must be a multiple of the stripe unit (%lld)",
 				   swidth, sunit);
-		return false;
+		goto check_override;
 	}
 	return true;
+
+check_override:
+	if (!may_repair)
+		return false;
+	/*
+	 * During mount, mp->m_dalign will not be set unless the sunit mount
+	 * option was set. If it was set, ignore the bad stripe alignment values
+	 * and allow the validation and overwrite later in the mount process to
+	 * attempt to overwrite the bad stripe alignment values with the values
+	 * supplied by mount options.
+	 */
+	if (!mp->m_dalign)
+		return false;
+	if (!silent)
+		xfs_notice(mp,
+"Will try to correct with specified mount options sunit (%d) and swidth (%d)",
+			BBTOB(mp->m_dalign), BBTOB(mp->m_swidth));
+	return true;
 }
 
 /*