diff options
author | Linus Torvalds <[email protected]> | 2024-11-20 15:40:54 -0800 |
---|---|---|
committer | Linus Torvalds <[email protected]> | 2024-11-20 15:40:54 -0800 |
commit | 14d0e1a09fe97a7524ff36baa695900cb0c10c23 (patch) | |
tree | accca02adb7453b2cec02cb9435b2678c243d6aa /drivers/reset/amlogic/reset-meson.c | |
parent | 9c39d5ab450f7181775957000f4aff33bfef9f7b (diff) | |
parent | b77587ac51d2fe4b9d5751662ddc083d19153662 (diff) |
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
Diffstat (limited to 'drivers/reset/amlogic/reset-meson.c')
-rw-r--r-- | drivers/reset/amlogic/reset-meson.c | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/drivers/reset/amlogic/reset-meson.c b/drivers/reset/amlogic/reset-meson.c new file mode 100644 index 000000000000..6ae4ed6b7f8b --- /dev/null +++ b/drivers/reset/amlogic/reset-meson.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Amlogic Meson Reset Controller driver + * + * Copyright (c) 2016-2024 BayLibre, SAS. + * Authors: Neil Armstrong <[email protected]> + * Jerome Brunet <[email protected]> + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +#include "reset-meson.h" + +static const struct meson_reset_param meson8b_param = { + .reset_ops = &meson_reset_ops, + .reset_num = 256, + .reset_offset = 0x0, + .level_offset = 0x7c, + .level_low_reset = true, +}; + +static const struct meson_reset_param meson_a1_param = { + .reset_ops = &meson_reset_ops, + .reset_num = 96, + .reset_offset = 0x0, + .level_offset = 0x40, + .level_low_reset = true, +}; + +static const struct meson_reset_param meson_s4_param = { + .reset_ops = &meson_reset_ops, + .reset_num = 192, + .reset_offset = 0x0, + .level_offset = 0x40, + .level_low_reset = true, +}; + +static const struct meson_reset_param t7_param = { + .reset_num = 224, + .reset_offset = 0x0, + .level_offset = 0x40, + .level_low_reset = true, +}; + +static const struct of_device_id meson_reset_dt_ids[] = { + { .compatible = "amlogic,meson8b-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-gxbb-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-axg-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-a1-reset", .data = &meson_a1_param}, + { .compatible = "amlogic,meson-s4-reset", .data = &meson_s4_param}, + { .compatible = "amlogic,c3-reset", .data = &meson_s4_param}, + { .compatible = "amlogic,t7-reset", .data = &t7_param}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_reset_dt_ids); + +static const struct regmap_config regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_reset_probe(struct platform_device *pdev) +{ + const struct meson_reset_param *param; + struct device *dev = &pdev->dev; + struct regmap *map; + void __iomem *base; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + param = device_get_match_data(dev); + if (!param) + return -ENODEV; + + map = devm_regmap_init_mmio(dev, base, ®map_config); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + return meson_reset_controller_register(dev, map, param); +} + +static struct platform_driver meson_reset_driver = { + .probe = meson_reset_probe, + .driver = { + .name = "meson_reset", + .of_match_table = meson_reset_dt_ids, + }, +}; +module_platform_driver(meson_reset_driver); + +MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver"); +MODULE_AUTHOR("Neil Armstrong <[email protected]>"); +MODULE_AUTHOR("Jerome Brunet <[email protected]>"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_IMPORT_NS(MESON_RESET); |