wifi: wilc1000: read MAC address from fuse at probe

The default netdev interface exposed by WILC1000 is registered at probe,
but the chip mac address is not known until ndo_open, which will load and
start chip firmware and then retrieve stored MAC address from it. As a
consequence, the interface has uninitialized value (00:00:00:00:00) until a
user brings up the interface.

Fix MAC address at probe by setting the following steps:
- at probe, read MAC address directly from fuse
- whenever a new netdevice is created, apply saved mac address (which can
  be a user-provided address, or the eFuse Mac address if no address has
  been passed by user)
- whenever an interface is brought up for the first time (and so the
  firmware is loaded and started), enforce netdevice mac address to the
  chip (in case user has changed it)

Reported-by: Heiko Thiery <[email protected]>
Closes: https://lore.kernel.org/netdev/CAEyMn7aV-B4OEhHR4Ad0LM3sKCz1-nDqSb9uZNmRWR-hMZ=z+A@mail.gmail.com/T/
Signed-off-by: Ajay Singh <[email protected]>
Co-developed-by: Alexis Lothoré <[email protected]>
Signed-off-by: Alexis Lothoré <[email protected]>
Tested-by: Heiko Thiery <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]

1 files changed, 22 insertions, 16 deletions

diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 2ee3d9827826..4e2698528a49 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -588,7 +588,6 @@ static int wilc_mac_open(struct net_device *ndev)
 	struct wilc *wl = vif->wilc;
 	int ret = 0;
 	struct mgmt_frame_regs mgmt_regs = {};
-	u8 addr[ETH_ALEN] __aligned(2);
 
 	if (!wl || !wl->dev) {
 		netdev_err(ndev, "device not ready\n");
@@ -607,25 +606,19 @@ static int wilc_mac_open(struct net_device *ndev)
 		return ret;
 	}
 
-	wilc_set_operation_mode(vif, wilc_get_vif_idx(vif), vif->iftype,
-				vif->idx);
-
-	if (is_valid_ether_addr(ndev->dev_addr)) {
-		ether_addr_copy(addr, ndev->dev_addr);
-		wilc_set_mac_address(vif, addr);
-	} else {
-		wilc_get_mac_address(vif, addr);
-		eth_hw_addr_set(ndev, addr);
-	}
 	netdev_dbg(ndev, "Mac address: %pM\n", ndev->dev_addr);
-
-	if (!is_valid_ether_addr(ndev->dev_addr)) {
-		netdev_err(ndev, "Wrong MAC address\n");
+	ret = wilc_set_mac_address(vif, ndev->dev_addr);
+	if (ret) {
+		netdev_err(ndev, "Failed to enforce MAC address in chip");
 		wilc_deinit_host_int(ndev);
-		wilc_wlan_deinitialize(ndev);
-		return -EINVAL;
+		if (!wl->open_ifcs)
+			wilc_wlan_deinitialize(ndev);
+		return ret;
 	}
 
+	wilc_set_operation_mode(vif, wilc_get_vif_idx(vif), vif->iftype,
+				vif->idx);
+
 	mgmt_regs.interface_stypes = vif->mgmt_reg_stypes;
 	/* so we detect a change */
 	vif->mgmt_reg_stypes = 0;
@@ -941,6 +934,7 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
 				      int vif_type, enum nl80211_iftype type,
 				      bool rtnl_locked)
 {
+	u8 mac_address[ETH_ALEN];
 	struct net_device *ndev;
 	struct wilc_vif *vif;
 	int ret;
@@ -969,6 +963,18 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
 	vif->iftype = vif_type;
 	vif->idx = wilc_get_available_idx(wl);
 	vif->mac_opened = 0;
+
+	memcpy(mac_address, wl->nv_mac_address, ETH_ALEN);
+	/* WILC firmware uses locally administered MAC address for the
+	 * second virtual interface (bit 1 of first byte set), but
+	 * since it is possibly not loaded/running yet, reproduce this behavior
+	 * in the driver during interface creation.
+	 */
+	if (vif->idx)
+		mac_address[0] |= 0x2;
+
+	eth_hw_addr_set(vif->ndev, mac_address);
+
 	mutex_lock(&wl->vif_mutex);
 	list_add_tail_rcu(&vif->list, &wl->vif_list);
 	wl->vif_num += 1;